summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-io.c
AgeCommit message (Collapse)Author
2015-11-18iwlwifi: move under intel vendor directoryKalle Valo
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-21iwlwifi: mvm: remove IWL_UCODE_TLV_API_HDC_PHASE_0 TLV flagEmmanuel Grumbach
All the supported firwmares support the new API. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2015-08-28iwlwifi: Deinline iwl_{read,write}(8,32}Emmanuel Grumbach
With CONFIG_IWLWIFI_DEVICE_TRACING=y, these functions are rather large, too big for inlining. With this .config: http://busybox.net/~vda/kernel_config, after uninlining these functions have sizes and callsite counts as follows: iwl_read32 475 bytes, 51 callsites iwl_write32 477 bytes, 90 callsites iwl_write8 493 bytes, 3 callsites Reduction in size is about 74,000 bytes: text data bss dec hex filename 90758147 17226024 36659200 144643371 89f152b vmlinux0 90687995 17221928 36659200 144569123 89df323 vmlinux.after Reported-by: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2015-03-26iwlwifi: drop support for early versions of 8000Emmanuel Grumbach
These early versions are no longer supported. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-12iwlwifi: mvm: fix force NMI for 8000Emmanuel Grumbach
The newer devices will enable a new register for this (DEVICE_SET_NMI_8000B_REG), but the interrupt handler isn't wired yet. Keep the old register for now. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: correctly set the NMI registerEmmanuel Grumbach
When we want to trigger an NMI in the device, we need to set bit 7 and not bit 0. However, older firmwares don't register to the interrupt issued by bit 7. Use bit 7 first so that the correct interrupt will be issued hoping that the firmware will react. To be on the safe side, set bit 0 in case the firmware didn't register to the proper interrupt. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: make hw rev checking more readableLiad Kaufman
Rather than ANDing with a mask - use existing macros, which are more readable. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-15iwlwifi: update nmi registerLiad Kaufman
In the 8000 HW family the register for forcing an NMI has changed, so this allows to still be able to force an NMI while taking into account the HW in order to write to the correct register. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: pcie: enable LP XTAL to reduce power consumptionAlexander Bondar
1. Enable LP XTAL to avoid HW bug where device may consume much power if FW is not loaded after device reset. LP XTAL is disabled by default after device HW reset. Configure device's "persistence" mode to avoid resetting XTAL again when SHRD_HW_RST occurs in S3. 2. Add methods to access SHR (shared block memory space) directly from PCI bus w/o need to power up MAC HW. Shared internal registers (e.g. SHR_APMG_GP1, SHR_APMG_XTAL_CFG)can be accessed directly from PCI bus through SHR arbiter even when MAC HW is powered down. This is possible due to indirect read/write via HEEP_CTRL_WRD_PCIEX_CTRL (0xEC) and HEEP_CTRL_WRD_PCIEX_DATA (0xF4) registers. Use iwl_write32()/iwl_read32() family to access these registers. The MAC HW need not be powered up so no "grab inc access" is required. For example, to read from SHR_APMG_GP1 register (0x1DC), first, write to the control register: HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register) HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 2 (read access) second, read from the data register HEEP_CTRL_WRD_PCIEX_DATA[31:0]. To write the register, first, write to the data register HEEP_CTRL_WRD_PCIEX_DATA[31:0] and then: HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register) HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 3 (write access) Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-03iwlwifi: pcie: fix secure section / dual cpu firmware loadingEran Harary
Also handle the bypass mode in which the second CPU doesn't interfere. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: Update Copyright to 2014Emmanuel Grumbach
Happy new year! Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: remove duplicate includesMichael Opdenacker
Reported by "make includecheck" Tested that the corresponding sources still compile well on x86 Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-07-16iwlwifi: move dump_fh into common codeInbal Hacohen
This means it can be shared for different transport layers in the future. Signed-off-by: Inbal Hacohen <Inbal.Hacohen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-03-06iwlwifi: export symbols only conditionallyJohannes Berg
If all the pieces of iwlwifi are built into the kernel then there's no need for it to export its symbols to other modules, so prevent that. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-01iwlwifi: move register access lock into transportLilach Edelstein
Move the reg_lock that protects HW register access into the transport implementation. Locking is no longer exposed, but handled internally in grab and release NIC access. This simplifies the users. Signed-off-by: Lilach Edelstein <lilach.edelstein@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-01iwlwifi: add iwl_set_bits_mask to transport APILilach Edelstein
Express iwl_set_bit() and iwl_clear_bit() through iwl_set_bits_mask() and add the latter to the transport's API in order to allow different implementation for different transport types in the future. Signed-off-by: Lilach Edelstein <lilach.edelstein@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-24iwlwifi: update copyrightJohannes Berg
Update Copyright notices to 2013. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: always check that grab_nic_access succeedsEmmanuel Grumbach
This allows to let sparse check that the NIC access is always released. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: virtualize SRAM accessEmmanuel Grumbach
Different transports implement the access to the SRAM in different ways. Virtualize it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: virtualize iwl_{grab,release}_nic_accessEmmanuel Grumbach
Since different transports have different ways to wake the up the NIC, we need to virtualize it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-06iwlwifi: move prph handling into the transportEmmanuel Grumbach
New transports may handle it internally for better performance. Also move the tracing inside PRPH access which will make the output more readable: iwlwifi_dev_ioread_prph32: Read 0x0 from SCD_AGGR_SEL (32-bit) instead of the corresponding accesses to HBUS_TARG_PRPH_*. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16iwlwifi: wipe out the status of the SCD when we disable a queueEmmanuel Grumbach
When we disable a queue, we don't want the SCD to remember anything about this queue (what packet was transmitted but not acked, what packed was acked etc...). Wipe out all this data in its SRAM. Constify the arguments to iwl_write_targ_mem_dwords on the way. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Trivial updates all over the place as usual." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits) Fix typo in include/linux/clk.h . pci: hotplug: Fix typo in pci iommu: Fix typo in iommu video: Fix typo in drivers/video Documentation: Add newline at end-of-file to files lacking one arm,unicore32: Remove obsolete "select MISC_DEVICES" module.c: spelling s/postition/position/g cpufreq: Fix typo in cpufreq driver trivial: typo in comment in mksysmap mach-omap2: Fix typo in debug message and comment scsi: aha152x: Fix sparse warning and make printing pointer address more portable. Change email address for Steve Glendinning Btrfs: fix typo in convert_extent_bit via: Remove bogus if check netprio_cgroup.c: fix comment typo backlight: fix memory leak on obscure error path Documentation: asus-laptop.txt references an obsolete Kconfig item Documentation: ManagementStyle: fixed typo mm/vmscan: cleanup comment error in balance_pgdat mm: cleanup on the comments of zone_reclaim_stat ...
2012-06-28treewide: Put a space between #include and FILEPaul Bolle
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-13iwlwifi: iwl_{read,write}_targ_mem_words takes dwordsEmmanuel Grumbach
Change its name to better reflect this. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: add iwl_set_bits_maskJohannes Berg
In a few cases we need to set a value in a certain mask inside a register, add the function iwl_set_bits_mask() to make such code easy. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-05iwlwifi: implement dynamic opmode loadingDon Fry
This is the next step in splitting up the driver, making the uCode API dependent pieces of it live in separate modules. Right now there's only one so it's not user-selectable, but we're actively working on more. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: cleanup/fix memory barriersStanislaw Gruszka
wmb(), rmb() are not needed when writel(), readl() are used as accessors for MMIO. We use them indirectly via iowrite32(), ioread32(). What is needed mmiowb(), for synchronizing writes coming from different CPUs on PCIe bridge (see in patch comments). This fortunately is not needed on x86, where mmiowb() is just defined as compiler barrier. As iwlwifi devices are most likely not used on anything other than x86, this is not so important fix. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: always check if got h/w access before writeStanislaw Gruszka
Before we write to the device registers always check if iwl_grap_nic_access() was successful. On the way change return type of grab_nic_access() to bool, and add likely()/unlikely() statement. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: dump stack when fail to gain access to the deviceStanislaw Gruszka
Print dump stack when the device is not responding. This should give some more clue about the reason of failure. Also change the message we print, since "MAC in deep sleep" is kinda confusing. On the way add unlikely(), as fail to gain NIC access is hmm ... unlikely. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-02iwlwifi: give trans to all the read / write functionsEmmanuel Grumbach
From now on, the transport layer in charge of providing access to the device. So change all the driver to give a pointer to the transport to all the low level functions that actually access the device. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-01-06iwlwifi: update CopyrightWey-Yi Guy
Update Copyright to 2012 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: add IO function for continuous write of target memoryHsu, Kenny
Add new IO function _iwl_write_targ_mem_words() to support target memory write for a continuous area. It will return error code -EBUSY if iwl_grab_nic_access() fails to indicate the memory write does not be performed. Meanwhile the existing function iwl_write_targ_mem() also been updated by using _iwl_write_targ_mem_words() in a single word case. Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-11-21iwlwifi: remove redundancyWey-Yi Guy
just use iwl_bus, remove the redundancy Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: all function iwl-io.c receive iwl_busEmmanuel Grumbach
Which means that iwl-io.c doesn't need to include iwl-dev.h any more. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-30iwlagn: introduce silent grabbing of NIC accessJohannes Berg
There are a few cases like the WoWLAN support I'm writing that require attempting to access the NIC when it is known that it might not be accessible, e.g. after the system woke up and the platform might have reset the device. To avoid messages in this case, introduce the new function iwl_grab_nic_access_silent(), it will only return an error status. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-22iwlagn: simplify error table readingJohannes Berg
The current code to read the error table header just hardcodes all the offsets, which is a bit hard to understand. We can read in the entire header (as much as we need) into a structure, and then take the data from there, which makes it easier to understand. To read a bigger blob we also don't need to grab NIC access for each word read, making the code more efficient. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-07iwlagn: move IO functions out of lineJohannes Berg
This generates a massive reduction in module size: with debug: text data bss dec hex filename 670300 13136 420 683856 a6f50 iwlagn.ko (before) 388347 13136 408 401891 621e3 iwlagn.ko (after) without debug: text data bss dec hex filename 528575 13072 420 542067 84573 iwlagn.ko (before) 294192 13072 408 307672 4b1d8 iwlagn.ko (after) This also removes all the IO debug functionality since it can easily be replaced by tracing, and makes the code unnecessarily complex. I haven't done any CPU utilisation measurements, but given that the hotpaths don't use much IO it is not likely to have a negative impact; in fact, the size reduction will reduce cache pressure which possibly improves performance. Finally, an unused function or two were removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>