summaryrefslogtreecommitdiff
path: root/drivers/net/phy/phy-c45.c
AgeCommit message (Collapse)Author
2024-03-05net: phy: Immediately call adjust_link if only tx_lpi_enabled changesAndrew Lunn
The MAC driver changes its EEE hardware configuration in its adjust_link callback. This is called when auto-neg completes. Disabling EEE via eee_enabled false will trigger an autoneg, and as a result the adjust_link callback will be called with phydev->enable_tx_lpi set to false. Similarly, eee_enabled set to true and with a change of advertised link modes will result in a new autoneg, and a call the adjust_link call. If set_eee is called with only a change to tx_lpi_enabled which does not trigger an auto-neg, it is necessary to call the adjust_link callback so that the MAC is reconfigured to take this change into account. When setting phydev->enable_tx_lpi, take both eee_enabled and tx_lpi_enabled into account, so the MAC drivers just needs to act on phydev->enable_tx_lpi and not the whole EEE configuration. The same check should be done for tx_lpi_timer too. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240302195306.3207716-5-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-27net: phy: simplify genphy_c45_ethtool_set_eeeHeiner Kallweit
Simplify the function, no functional change intended. - Remove not needed variable unsupp, I think code is even better readable now. - Move setting phydev->eee_enabled out of the if clause - Simplify return value handling Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/442277c7-7431-4542-80b5-1d3d691714d7@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-21net: phy: c45: detect 100/1000BASE-T1 linkmode advertisementsDimitri Fedrau
Set 100BT1 and 1000BT1 linkmode advertisement bits to adv_l_mask to enable detection. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Link: https://lore.kernel.org/r/20240218075753.18067-4-dima.fedrau@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-17net: phy: c45: add support for MDIO_AN_EEE_ADV2Heiner Kallweit
Add support for handling the EEE advertisement 2 register. For now only 2500baseT and 5000baseT modes are supported. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-17net: phy: c45: add support for EEE link partner ability 2 to ↵Heiner Kallweit
genphy_c45_read_eee_lpa Add support for reading EEE link partner ability 2 register. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-17net: phy: c45: add and use genphy_c45_read_eee_cap2Heiner Kallweit
Add and use genphy_c45_read_eee_cap2(), complementing genphy_c45_read_eee_cap1(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31net: phy: c45: change genphy_c45_ethtool_[get|set]_eee to use EEE linkmode ↵Heiner Kallweit
bitmaps Change genphy_c45_ethtool_[get|set]_eee to use EEE linkmode bitmaps. This is a prerequisite for adding support for EEE modes beyond bit 31. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31ethtool: add suffix _u32 to legacy bitmap members of struct ethtool_keeeHeiner Kallweit
This is in preparation of using the existing names for linkmode bitmaps. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel ↵Heiner Kallweit
side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13net: phy: c45: add genphy_c45_pma_read_ext_abilities() functionOleksij Rempel
Move part of the genphy_c45_pma_read_abilities() code to a separate function. Some PHYs do not implement PMA/PMD status 2 register (Register 1.8) but do implement PMA/PMD extended ability register (Register 1.11). To make use of it, we need to be able to access this part of code separately. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20231212054144.87527-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-20net: phy: c45: detect the BASE-T1 speed from the ability registerStefan Eichenberger
Read the ability to do 100BASE-T1 and 1000BASE-T1 from the extended BASE-T1 ability register of the PHY. Signed-off-by: Stefan Eichenberger <eichest@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-20net: phy: c45: add a separate function to read BASE-T1 abilitiesStefan Eichenberger
Add a separate function to read the BASE-T1 abilities. Some PHYs do not indicate the availability of the extended BASE-T1 ability register, so this function must be called separately. Signed-off-by: Stefan Eichenberger <eichest@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-20net: phy: c45: add support for 1000BASE-T1 forced setupStefan Eichenberger
Add support to force 1000BASE-T1 by setting the correct control bit in the MDIO_MMD_PMA_PMD_BT1_CTRL register. Signed-off-by: Stefan Eichenberger <eichest@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-20net: phy-c45: Fix genphy_c45_ethtool_set_eee descriptionAndrew Lunn
The text has been cut/paste from genphy_c45_ethtool_get_eee but not changed to reflect it performs set. Additionally, extend the comment. This function implements the logic that eee_enabled has global control over EEE. When eee_enabled is false, no link modes will be advertised, and as a result, the MAC should not transmit LPI. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230619220332.4038924-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-27net: phy: c45: fix network interface initialization failures on xtensa, ↵Oleksij Rempel
arm:cubieboard Without proper initialization, "changed" returned random numbers and caused interface initialization failures. Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230225071644.2754893-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-23net: phy: c45: genphy_c45_ethtool_set_eee: validate EEE link modesOleksij Rempel
Currently, it is possible to let some PHYs to advertise not supported EEE link modes. So, validate them before overwriting existing configuration. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23net: phy: do not force EEE supportOleksij Rempel
With following patches: commit 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") commit 5827b168125d ("net: phy: c45: migrate to genphy_c45_write_eee_adv()") we set the advertisement to potentially supported values. This behavior may introduce new regressions on systems where EEE was disabled by default (BIOS or boot loader configuration or by other ways.) At same time, with this patches, we would overwrite EEE advertisement configuration made over ethtool. To avoid this issues, we need to cache initial and ethtool advertisement configuration and store it for later use. Fixes: 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") Fixes: 5827b168125d ("net: phy: c45: migrate to genphy_c45_write_eee_adv()") Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23net: phy: c45: add genphy_c45_an_config_eee_aneg() functionOleksij Rempel
Add new genphy_c45_an_config_eee_aneg() function and replace some of genphy_c45_write_eee_adv() calls. This will be needed by the next patch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23net: phy: c45: use "supported_eee" instead of supported for access validationOleksij Rempel
Make sure we use proper variable to validate access to potentially not supported registers. Otherwise we will get false read/write errors. Reported-by: kernel test robot <yujie.liu@intel.com> Link: https://lore.kernel.org/oe-lkp/202302211644.c12d19de-yujie.liu@intel.com Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-15net: phy: c45: genphy_c45_an_config_aneg(): fix uninitialized symbol errorOleksij Rempel
Fix warning: drivers/net/phy/phy-c45.c:712 genphy_c45_write_eee_adv() error: uninitialized symbol 'changed' Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202302150232.q6idsV8s-lkp@intel.com/ Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230215050453.2251360-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-13net: phy: c45: migrate to genphy_c45_write_eee_adv()Oleksij Rempel
Migrate from genphy_config_eee_advert() to genphy_c45_write_eee_adv(). It should work as before except write operation to the EEE adv registers will be done only if some EEE abilities was detected. If some driver will have a regression, related driver should provide own .get_features callback. See micrel.c:ksz9477_get_features() as example. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: add genphy_c45_ethtool_get/set_eee() supportOleksij Rempel
Add replacement for phy_ethtool_get/set_eee() functions. Current phy_ethtool_get/set_eee() implementation is great and it is possible to make it even better: - this functionality is for devices implementing parts of IEEE 802.3 specification beyond Clause 22. The better place for this code is phy-c45.c - currently it is able to do read/write operations on PHYs with different abilities to not existing registers. It is better to use stored supported_eee abilities to avoid false read/write operations. - the eee_active detection will provide wrong results on not supported link modes. It is better to validate speed/duplex properties against supported EEE link modes. - it is able to support only limited amount of link modes. We have more EEE link modes... By refactoring this code I address most of this point except of the last one. Adding additional EEE link modes will need more work. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: add genphy_c45_read_eee_abilities() functionOleksij Rempel
Add generic function for EEE abilities defined by IEEE 802.3 specification. For now following registers are supported: - IEEE 802.3-2018 45.2.3.10 EEE control and capability 1 (Register 3.20) - IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register (Register 1.2295) Since I was not able to find any flag signaling support of these registers, we should detect link mode abilities first and then based on these abilities doing EEE link modes detection. Results of EEE ability detection will be stored into new variable phydev->supported_eee. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-19net: phy: fix use of uninit variable when setting PLCA configPiergiorgio Beruto
Coverity reported the following: *** CID 1530573: (UNINIT) drivers/net/phy/phy-c45.c:1036 in genphy_c45_plca_set_cfg() 1030 return ret; 1031 1032 val = ret; 1033 } 1034 1035 if (plca_cfg->node_cnt >= 0) vvv CID 1530573: (UNINIT) vvv Using uninitialized value "val". 1036 val = (val & ~MDIO_OATC14_PLCA_NCNT) | 1037 (plca_cfg->node_cnt << 8); 1038 1039 if (plca_cfg->node_id >= 0) 1040 val = (val & ~MDIO_OATC14_PLCA_ID) | 1041 (plca_cfg->node_id); drivers/net/phy/phy-c45.c:1076 in genphy_c45_plca_set_cfg() 1070 return ret; 1071 1072 val = ret; 1073 } 1074 1075 if (plca_cfg->burst_cnt >= 0) vvv CID 1530573: (UNINIT) vvv Using uninitialized value "val". 1076 val = (val & ~MDIO_OATC14_PLCA_MAXBC) | 1077 (plca_cfg->burst_cnt << 8); 1078 1079 if (plca_cfg->burst_tmr >= 0) 1080 val = (val & ~MDIO_OATC14_PLCA_BTMR) | 1081 (plca_cfg->burst_tmr); This is not actually creating a real problem because the path leading to 'val' being used uninitialized will eventually override the full content of that variable before actually using it for writing the register. However, the fix is simple and comes at basically no cost. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Fixes: 493323416fed ("drivers/net/phy: add helpers to get/set PLCA configuration") Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/f22f1864165a8dbac8b7a2277f341bc8e7a7b70d.1674056765.git.piergiorgio.beruto@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11drivers/net/phy: add helpers to get/set PLCA configurationPiergiorgio Beruto
This patch adds support in phylib to read/write PLCA configuration for Ethernet PHYs that support the OPEN Alliance "10BASE-T1S PLCA Management Registers" specifications. These can be found at https://www.opensig.org/about/specifications/ Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08net: phy: c45 baset1: do not skip aneg configuration if clock role is not ↵Oleksij Rempel
specified In case master/slave clock role is not specified (which is default), the aneg registers will not be written. The visible impact of this is missing pause advertisement. So, rework genphy_c45_baset1_an_config_aneg() to be able to write advertisement registers even if clock role is unknown. Fixes: 3da8ffd8545f ("net: phy: Add 10BASE-T1L support in phy-c45") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220805073159.908643-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-09net: phy: export genphy_c45_baset1_read_status()Oleksij Rempel
Export genphy_c45_baset1_read_status() to make it reusable by PHY drivers. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: phy: genphy_c45_pma_baset1_read_master_slave: read actual configurationOleksij Rempel
Since MDIO_PMA_PMD_BT1_CTRL register shows actual configuration (and forced state configuration is equal to the state), we should show this configuration for ethtool. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: phy: introduce genphy_c45_pma_baset1_read_master_slave()Oleksij Rempel
Move baset1 specific part of genphy_c45_read_pma() code to separate function to make it reusable by PHY drivers. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: phy: genphy_c45_pma_baset1_setup_master_slave: do no set unknown ↵Oleksij Rempel
configuration Do not change default master/slave forced configuration if no changes was requested. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: phy: introduce genphy_c45_pma_baset1_setup_master_slave()Oleksij Rempel
Move baset1 specific part of genphy_c45_pma_setup_forced() code to separate function to make it reusable by PHY drivers. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: phy: genphy_c45_baset1_an_config_aneg: do no set unknown configurationOleksij Rempel
Do not change default master/slave autoneg configuration if no changes was requested. Fixes: 3da8ffd8545f ("net: phy: Add 10BASE-T1L support in phy-c45") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: phy: Add 10BASE-T1L support in phy-c45Alexandru Tachici
This patch is needed because the BASE-T1 uses different registers for status, control and advertisement to those already employed in the existing phy-c45 functions. Where required, genphy_c45 functions will now check whether the device supports BASE-T1 and use the specific registers instead: 45.2.7.19 BASE-T1 AN control register, 45.2.7.20 BASE-T1 AN status, 45.2.7.21 BASE-T1 AN advertisement register, 45.2.7.22 BASE-T1 AN LP Base Page ability register, 45.2.1.185 BASE-T1 PMA/PMD control register. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26net: phy: fixed warning: Function parameter not describedLuo Jie
Fixed warning: Function parameter or member 'enable' not described in 'genphy_c45_fast_retrain' Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211026102957.17100-1-luoj@codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25net: phy: add genphy_c45_fast_retrainLuo Jie
Add generic fast retrain auto-negotiation function for C45 PHYs. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: phy: delete repeated words of commentsWenpeng Liang
There are some repeated words in some comments, they should be deleted. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: phy: add genphy_c45_pma_suspend/resumeRadu Pirea (NXP OSS)
Add generic PMA suspend and resume callback functions for C45 PHYs. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24net: phy: add genphy_c45_loopbackWong Vee Khee
Add generic code to enable C45 PHY loopback into the common phy-c45.c file. This will allow C45 PHY drivers aceess this by setting .set_loopback. Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-17net: phy: fix kernel-doc markupsMauro Carvalho Chehab
Some functions have different names between their prototypes and the kernel-doc markup. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-06-19net: phy: split devices_in_packageRussell King
We have two competing requirements for the devices_in_package field. We want to use it as a bit array indicating which MMDs are present, but we also want to know if the Clause 22 registers are present. Since "devices in package" is a term used in the 802.3 specification, keep this as the as-specified values read from the PHY, and introduce a new member "mmds_present" to indicate which MMDs are actually present in the PHY, derived from the "devices in package" value. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-24net: phy: remove genphy_no_soft_resetHeiner Kallweit
Since 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") we don't need genphy_no_soft_reset() any longer. Not setting callback soft_reset results in a no-op now. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The mptcp conflict was overlapping additions. The SMC conflict was an additional and removal happening at the same time. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: phy: corrected the return value for genphy_check_and_restart_aneg and ↵Sudheesh Mavila
genphy_c45_check_and_restart_aneg When auto-negotiation is not required, return value should be zero. Changes v1->v2: - improved comments and code as Andrew Lunn and Heiner Kallweit suggestion - fixed issue in genphy_c45_check_and_restart_aneg as Russell King suggestion. Fixes: 2a10ab043ac5 ("net: phy: add genphy_check_and_restart_aneg()") Fixes: 1af9f16840e9 ("net: phy: add genphy_c45_check_and_restart_aneg()") Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19phy: avoid unnecessary link-up delay in polling modePetr Oros
commit 93c0970493c71f ("net: phy: consider latched link-down status in polling mode") removed double-read of latched link-state register for polling mode from genphy_update_link(). This added extra ~1s delay into sequence link down->up. Following scenario: - After boot link goes up - phy_start() is called triggering an aneg restart, hence link goes down and link-down info is latched. - After aneg has finished link goes up. In phy_state_machine is checked link state but it is latched "link is down". The state machine is scheduled after one second and there is detected "link is up". This extra delay can be avoided when we keep link-state register double read in case when link was down previously. With this solution we don't miss a link-down event in polling mode and link-up is faster. Details about this quirky behavior on Realtek phy: Without patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), here i read link-down (BMSR_LSTATUS==0), T0+5s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), up-to-date link-up is read (BMSR_LSTATUS==1), phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING With patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), first BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==0, second BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==1, phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-16net: phy: Fix "link partner" information disappear issueYonglong Liu
Some drivers just call phy_ethtool_ksettings_set() to set the links, for those phy drivers that use genphy_read_status(), if autoneg is on, and the link is up, than execute "ethtool -s ethx autoneg on" will cause "link partner" information disappear. The call trace is phy_ethtool_ksettings_set()->phy_start_aneg() ->linkmode_zero(phydev->lp_advertising)->genphy_read_status(), the link didn't change, so genphy_read_status() just return, and phydev->lp_advertising is zero now. This patch moves the clear operation of lp_advertising from phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and if autoneg on and autoneg not complete, just clear what the generic functions care about. Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27Add genphy_c45_config_aneg() function to phy-c45.cMarco Hartmann
Commit 34786005eca3 ("net: phy: prevent PHYs w/o Clause 22 regs from calling genphy_config_aneg") introduced a check that aborts phy_config_aneg() if the phy is a C45 phy. This causes phy_state_machine() to call phy_error() so that the phy ends up in PHY_HALTED state. Instead of returning -EOPNOTSUPP, call genphy_c45_config_aneg() (analogous to the C22 case) so that the state machine can run correctly. genphy_c45_config_aneg() closely resembles mv3310_config_aneg() in drivers/net/phy/marvell10g.c, excluding vendor specific configurations for 1000BaseT. Fixes: 22b56e827093 ("net: phy: replace genphy_10g_driver with genphy_c45_driver") Signed-off-by: Marco Hartmann <marco.hartmann@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-13net: phy: consider AN_RESTART status when reading link statusHeiner Kallweit
After configuring and restarting aneg we immediately try to read the link status. On some systems the PHY may not yet have cleared the "aneg complete" and "link up" bits, resulting in a false link-up signal. See [0] for a report. Clause 22 and 45 both require the PHY to keep the AN_RESTART bit set until the PHY actually starts auto-negotiation. Let's consider this in the generic functions for reading link status. The commit marked as fixed is the first one where the patch applies cleanly. [0] https://marc.info/?t=156518400300003&r=1&w=2 Fixes: c1164bb1a631 ("net: phy: check PMAPMD link status only in genphy_c45_read_link") Tested-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-08net: phy: replace genphy_10g_driver with genphy_c45_driverHeiner Kallweit
Recently a number of generic functions for Clause 45 PHY's has been added. So let's replace the old very limited genphy_10g_driver with a genphy_c45_driver. This driver isn't limited to 10G, however it's worth to be noted that Clause 45 doesn't cover 1000Base-T. For using 1000Base-T with a Clause 45 PHY a dedicated PHY driver using vendor registers is needed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02net: phy: deal properly with autoneg incomplete in genphy_c45_read_lpaHeiner Kallweit
The link partner advertisement registers are not guaranteed to contain valid values if autoneg is incomplete. Therefore, if MDIO_AN_STAT1_COMPLETE isn't set, let's clear all link partner capability bits. This also avoids unnecessary register reads if link is down and phylib is in polling mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-26 20:16:13 +0000