| Age | Commit message (Collapse) | Author |
|---|
|
'op-cs' is copied in 'fun->mchip_number' which is used to access the
'mchip_offsets' and the 'rnb_gpio' arrays.
These arrays have NAND_MAX_CHIPS elements, so the index must be below this
limit.
Fix the sanity check in order to avoid the NAND_MAX_CHIPS value. This
would lead to out-of-bound accesses.
Fixes: 54309d657767 ("mtd: rawnand: fsl_upm: Implement exec_op()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/cd01cba1c7eda58bdabaae174c78c067325803d2.1689803636.git.christophe.jaillet@wanadoo.fr
|
|
gcc gets confused when -ftrivial-auto-var-init=pattern is used on sparse
bit fields such as 'struct spi_mem_op', which caused the previous false
positive warning about an uninitialized variable:
drivers/mtd/spi-nor/spansion.c: error: 'op' is used uninitialized [-Werror=uninitialized]
In fact, the variable is fully initialized and gcc does not see it being
used, so the warning is entirely bogus. The problem appears to be
a misoptimization in the initialization of single bit fields when the
rest of the bytes are not initialized.
A previous workaround added another initialization, which ended up
shutting up the warning in spansion.c, though it apparently still happens
in other files as reported by Peter Foley in the gcc bugzilla. The
workaround of adding a fake initialization seems particularly bad
because it would set values that can never be correct but prevent the
compiler from warning about actually missing initializations.
Revert the broken workaround and instead pad the structure to only
have bitfields that add up to full bytes, which should avoid this
behavior in all drivers.
I also filed a new bug against gcc with what I found, so this can
hopefully be addressed in future gcc releases. At the moment, only
gcc-12 and gcc-13 are affected.
Cc: Peter Foley <pefoley2@pefoley.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110743
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108402
Link: https://godbolt.org/z/efMMsG1Kx
Fixes: 420c4495b5e56 ("mtd: spi-nor: spansion: make sure local struct does not contain garbage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230719190045.4007391-1-arnd@kernel.org
|
|
Currently, read/write_page_hwecc() and read/write_page_raw() are not
aligned: there is a mismatch in the OOB bytes which are not
read/written at the same offset in both cases (raw vs. hwecc).
This is a real problem when relying on the presence of the Page
Addresses (PA) when using the NAND chip as a boot device, as the
BootROM expects additional data in the OOB area at specific locations.
Rockchip boot blocks are written per 4 x 512 byte sectors per page.
Each page with boot blocks must have a page address (PA) pointer in OOB
to the next page. Pages are written in a pattern depending on the NAND chip ID.
Generate boot block page address and pattern for hwecc in user space
and copy PA data to/from the already reserved last 4 bytes before ECC
in the chip->oob_poi data layout.
Align the different helpers. This change breaks existing jffs2 users.
Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others")
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/5e782c08-862b-51ae-47ff-3299940928ca@gmail.com
|
|
Rockchip boot blocks are written per 4 x 512 byte sectors per page.
Each page with boot blocks must have a page address (PA) pointer in OOB
to the next page.
The currently advertised free OOB area starts at offset 6, like
if 4 PA bytes were located right after the BBM. This is wrong as the
PA bytes are located right before the ECC bytes.
Fix the layout by allowing access to all bytes between the BBM and the
PA bytes instead of reserving 4 bytes right after the BBM.
This change breaks existing jffs2 users.
Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others")
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/d202f12d-188c-20e8-f2c2-9cc874ad4d22@gmail.com
|
|
It is incorrect to calculate number of OOB bytes for ECC engine using
some "already known" ECC step size (1024 bytes here). Number of such
bytes for ECC engine must be whole OOB except 2 bytes for bad block
marker, while proper ECC step size and strength will be selected by
ECC logic.
Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230705065211.293500-1-AVKrasnov@sberdevices.ru
|
|
Once the ECC word endianness is converted to BE32, we force cast it
to u32 so we can use elm_write_reg() which in turn uses writel().
Fixes below sparse warnings:
drivers/mtd/nand/raw/omap_elm.c:180:37: sparse: expected unsigned int [usertype] val
drivers/mtd/nand/raw/omap_elm.c:180:37: sparse: got restricted __be32 [usertype]
drivers/mtd/nand/raw/omap_elm.c:185:37: sparse: expected unsigned int [usertype] val
drivers/mtd/nand/raw/omap_elm.c:185:37: sparse: got restricted __be32 [usertype]
drivers/mtd/nand/raw/omap_elm.c:190:37: sparse: expected unsigned int [usertype] val
drivers/mtd/nand/raw/omap_elm.c:190:37: sparse: got restricted __be32 [usertype]
>> drivers/mtd/nand/raw/omap_elm.c:200:40: sparse: sparse: restricted __be32 degrades to integer
drivers/mtd/nand/raw/omap_elm.c:206:39: sparse: sparse: restricted __be32 degrades to integer
drivers/mtd/nand/raw/omap_elm.c:210:37: sparse: expected unsigned int [assigned] [usertype] val
drivers/mtd/nand/raw/omap_elm.c:210:37: sparse: got restricted __be32 [usertype]
drivers/mtd/nand/raw/omap_elm.c:213:37: sparse: expected unsigned int [assigned] [usertype] val
drivers/mtd/nand/raw/omap_elm.c:213:37: sparse: got restricted __be32 [usertype]
drivers/mtd/nand/raw/omap_elm.c:216:37: sparse: expected unsigned int [assigned] [usertype] val
drivers/mtd/nand/raw/omap_elm.c:216:37: sparse: got restricted __be32 [usertype]
drivers/mtd/nand/raw/omap_elm.c:219:37: sparse: expected unsigned int [assigned] [usertype] val
drivers/mtd/nand/raw/omap_elm.c:219:37: sparse: got restricted __be32 [usertype]
drivers/mtd/nand/raw/omap_elm.c:222:37: sparse: expected unsigned int [assigned] [usertype] val
drivers/mtd/nand/raw/omap_elm.c:222:37: sparse: got restricted __be32 [usertype]
drivers/mtd/nand/raw/omap_elm.c:225:37: sparse: expected unsigned int [assigned] [usertype] val
drivers/mtd/nand/raw/omap_elm.c:225:37: sparse: got restricted __be32 [usertype]
drivers/mtd/nand/raw/omap_elm.c:228:39: sparse: sparse: restricted __be32 degrades to integer
Fixes: bf22433575ef ("mtd: devices: elm: Add support for ELM error correction")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306212211.WDXokuWh-lkp@intel.com/
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230624184021.7740-1-rogerq@kernel.org
|
|
Reading ECC status is failing.
w25n02kv_ecc_get_status() is using on-stack buffer for
SPINAND_GET_FEATURE_OP() output. It is not suitable for
DMA needs of spi-mem.
Fix this by using the spi-mem operations dedicated buffer
spinand->scratchbuf.
See
spinand->scratchbuf:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/mtd/spinand.h?h=v6.3#n418
spi_mem_check_op():
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/spi/spi-mem.c?h=v6.3#n199
Fixes: 6154c7a58348 ("mtd: spinand: winbond: add Winbond W25N02KV flash support")
Cc: stable@vger.kernel.org
Signed-off-by: Olivier Maignial <olivier.maignial@hotmail.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/DB4P250MB1032EDB9E36B764A33769039FE23A@DB4P250MB1032.EURP250.PROD.OUTLOOK.COM
|
|
Reading ECC status is failing.
tx58cxgxsxraix_ecc_get_status() is using on-stack buffer
for SPINAND_GET_FEATURE_OP() output. It is not suitable
for DMA needs of spi-mem.
Fix this by using the spi-mem operations dedicated buffer
spinand->scratchbuf.
See
spinand->scratchbuf:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/mtd/spinand.h?h=v6.3#n418
spi_mem_check_op():
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/spi/spi-mem.c?h=v6.3#n199
Fixes: 10949af1681d ("mtd: spinand: Add initial support for Toshiba TC58CVG2S0H")
Cc: stable@vger.kernel.org
Signed-off-by: Olivier Maignial <olivier.maignial@hotmail.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/DB4P250MB1032553D05FBE36DEE0D311EFE23A@DB4P250MB1032.EURP250.PROD.OUTLOOK.COM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from
"Core MTD changes:
- otp:
- Put factory OTP/NVRAM into the entropy pool
- Clean up on error in mtd_otp_nvmem_add()
MTD devices changes:
- sm_ftl: Fix typos in comments
- Use SPDX license headers
- pismo: Switch back to use i2c_driver's .probe()
- mtdpart: Drop useless LIST_HEAD
- st_spi_fsm: Use the devm_clk_get_enabled() helper function
DT binding changes:
- partitions:
- Include TP-Link SafeLoader in allowed list
- Add missing type for "linux,rootfs"
- Extend the nand node names filter
- Create a file for raw NAND chip properties
- Mark nand-ecc-placement deprecated
- Describe nand-ecc-mode
- Prevent NAND chip unevaluated properties in all NAND bindings with
a NAND chip reference.
- Qcom: Fix a property position
- Marvell: Convert to YAML DT schema
Raw NAND chip drivers changes:
- Macronix: OTP access for MX30LFxG18AC
- Add basic Sandisk manufacturer ops
- Add support for Sandisk SDTNQGAMA
Raw NAND controller driver changes:
- Meson:
- Replace integer consts with proper defines
- Allow waiting w/o wired ready/busy pin
- Check buffer length validity
- Fix unaligned DMA buffers handling
- dt-bindings: Fix 'nand-rb' property
- Arasan: Revert "mtd: rawnand: arasan: Prevent an unsupported
configuration" as this limitation is no longer true thanks to the
recent efforts in improving the clocks support in this driver
SPI-NAND changes:
- Gigadevice: add support for GD5F2GQ5xExxH
- Macronix: Add support for serial NAND flashes"
* tag 'mtd/for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (38 commits)
dt-bindings: mtd: marvell-nand: Convert to YAML DT scheme
dt-bindings: mtd: ti,am654: Prevent unevaluated properties
dt-bindings: mtd: mediatek: Prevent NAND chip unevaluated properties
dt-bindings: mtd: mediatek: Reference raw-nand-chip.yaml
dt-bindings: mtd: stm32: Prevent NAND chip unevaluated properties
dt-bindings: mtd: rockchip: Prevent NAND chip unevaluated properties
dt-bindings: mtd: intel: Prevent NAND chip unevaluated properties
dt-bindings: mtd: denali: Prevent NAND chip unevaluated properties
dt-bindings: mtd: brcmnand: Prevent NAND chip unevaluated properties
dt-bindings: mtd: meson: Prevent NAND chip unevaluated properties
dt-bindings: mtd: sunxi: Prevent NAND chip unevaluated properties
dt-bindings: mtd: ingenic: Prevent NAND chip unevaluated properties
dt-bindings: mtd: qcom: Prevent NAND chip unevaluated properties
dt-bindings: mtd: qcom: Fix a property position
dt-bindings: mtd: Describe nand-ecc-mode
dt-bindings: mtd: Mark nand-ecc-placement deprecated
dt-bindings: mtd: Create a file for raw NAND chip properties
dt-bindings: mtd: Accept nand related node names
mtd: sm_ftl: Fix typos in comments
mtd: otp: clean up on error in mtd_otp_nvmem_add()
...
|
|
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
|
|
|
|
Fix typo in the description of the 'succesfull'.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230621020331.1508-1-wangdeming@inspur.com
|
|
Smatch complains that these error paths are missing cleanup:
drivers/mtd/mtdcore.c:983 mtd_otp_nvmem_add()
warn: missing unwind goto?
This needs to call nvmem_unregister(mtd->otp_user_nvmem) before
returning.
Fixes: 3b270fac8443 ("mtd: otp: Put factory OTP/NVRAM into the entropy pool")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/fe7ef901-9571-4c6e-a40e-449046efe2c6@moroto.mountain
|
|
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230611204327.828122-1-u.kleine-koenig@pengutronix.de
|
|
Support for OTP area access on MX30LFxG18AC chip series.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230615094015.3780078-1-AVKrasnov@sberdevices.ru
|
|
Meson NAND controller requires 8 bytes alignment for DMA addresses,
otherwise it "aligns" passed address by itself thus accessing invalid
location in the provided buffer. This patch makes unaligned buffers to
be reallocated to become valid.
Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230615080815.3291006-1-AVKrasnov@sberdevices.ru
|
|
Sandisk SDTNQGAMA is a 8GB size, 3.3V 8 bit chip with 16KB page size,
1KB write size and 40 bit ecc support
Co-developed-by: Paweł Jarosz <paweljarosz3691@gmail.com>
Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/98811c98-4681-6ddc-8287-bd9b77559c51@gmail.com
|
|
Add basic Sandisk manufacturer ops support to get
SDTNQGAMA timing data with the nand_get_sdr_timings()
function.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/aaf4580a-a368-8f70-c9c4-21b5ed4dd599@gmail.com
|
|
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of propagating the fmode_t, just use a bool to track if a mtd
block device was opened for writing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20230608110258.189493-23-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The current interface for exclusive opens is rather confusing as it
requires both the FMODE_EXCL flag and a holder. Remove the need to pass
FMODE_EXCL and just key off the exclusive open off a non-NULL holder.
For blkdev_put this requires adding the holder argument, which provides
better debug checking that only the holder actually releases the hold,
but at the same time allows removing the now superfluous mode argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The mode argument to the ->release block_device_operation is never used,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
->open is only called on the whole device. Make that explicit by
passing a gendisk instead of the block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The factory OTP, if supported, contains factory-programmed
information such as typically the serial number or production
week for the chip.
As this is device-unique information, submit it into the
system entropy pool.
This does not count as improvement of the entropy as such
but in practice it makes it a bit more random to mix in these
numbers.
Cc: Michael Walle <michael@walle.cc>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230606142931.3721374-1-linus.walleij@linaro.org
|
|
'tmp_list' is unused, so drop it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/547248195d87d1240d6126d13eb1364b1a0b634d.1685853690.git.christophe.jaillet@wanadoo.fr
|
|
Some of the files in mtd/chips do not have a SPDX license
header, presumably because the text string "GPL'd" didn't
parse with Thomas rulesets for magic license tagging.
Fix this, the code is initially from RedHat which clearly
targeted the Linux kernel and intended it to be GPLv2.
In any case the original author appears to be David
Woodhouse who can then confirm this.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230603185200.3571174-1-linus.walleij@linaro.org
|
|
Meson NAND controller has limited buffer length, so check it before
command execution to avoid length trim. Also check MTD write size on
chip attach.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230609112840.2325455-1-AVKrasnov@sberdevices.ru
|
|
MX31LF2GE4BC and MX31UF2GE4BC are Macroninx SPI NAND flash
with 8-bit on-die ECC.
Validated via normal(default) and QUAD mode by read ,read back,
on Xilinx Zynq PicoZed FPGA which include Macronix
SPI Host(drivers/spi/spi-mxic.c)
Signed-off-by: JaimeLiao <jaimeliao.tw@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230608052114.20454-1-jaimeliao.tw@gmail.com
|
|
If there is no wired ready/busy pin, classic way to wait for command
completion is to use function 'nand_soft_waitrdy()'. Meson NAND has
special command which allows to wait for NAND_STATUS_READY bit without
reading status in a software loop (as 'nand_soft_waitrdy()' does). To
use it send this command along with NAND_CMD_STATUS, then wait for an
interrupt, and after interrupt send NAND_CMD_READ0. So this feature
allows to use interrupt driven waiting without wired ready/busy pin.
Suggested-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230608044728.1328506-3-AVKrasnov@sberdevices.ru
|
|
Add defines for column address. It makes driver more readable, because
bitwise OR with 0 looks useless.
Suggested-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230608043644.1271186-1-AVKrasnov@sberdevices.ru
|
|
This reverts commit fc9e18f9e987ad46722dad53adab1c12148c213c.
This patch was a work around to fix timeout issue while operating in NVDDR
mode with software ECC engine. This patch prevents the Arasan NAND driver
from operating in NVDDR mode with software ECC engine resulting in a
significant performance degradation with SW-ECC.
'commit 7499bfeedb47 ("mtd: rawnand: arasan: Update NAND bus clock instead
of system clock")' and 'commit e16eceea863b ("mtd: rawnand: arasan: Fix
clock rate in NV-DDR")'
fixes the timeout issue in NVDDR mode with SW-ECC so, reverting the changes
as this work around is no longer required.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230607053936.14306-1-amit.kumar-mahapatra@amd.com
|
|
early_lookup_bdev is supposed to only be called from the early boot
code, but mdtblock_early_get_bdev is called as a general fallback when
lookup_bdev fails, which is problematic because early_lookup_bdev
bypasses all normal path based permission checking, and might cause
problems with certain container environments renaming devices.
Switch to only call early_lookup_bdev when block2mtd is built-in and the
system state in not running yet.
Note that this strictly speaking changes the kernel ABI as the PARTUUID=
and PARTLABEL= style syntax is now not available during a running
systems. They never were intended for that, but this breaks things
we'll have to figure out a way to make them available again. But if
avoidable in any way I'd rather avoid that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230531125535.676098-24-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Simplify add_device a bit by splitting out the cumbersome early boot logic
into a separate helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230531125535.676098-23-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
name_to_dev_t has a very misleading name, that doesn't make clear
it should only be used by the early init code, and also has a bad
calling convention that doesn't allow returning different kinds of
errors. Rename it to early_lookup_bdev to make the use case clear,
and return an errno, where -EINVAL means the string could not be
parsed, and -ENODEV means it the string was valid, but there was
no device found for it.
Also stub out the whole call for !CONFIG_BLOCK as all the non-block
root cases are always covered in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new blk_holder_ops structure, which is passed to blkdev_get_by_* and
installed in the block_device for exclusive claims. It will be used to
allow the block layer to call back into the user of the block device for
thing like notification of a removed device or a device resize.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
marvell_nfc_setup_interface() uses the frequency retrieved from the
clock associated with the nand interface to determine the timings that
will be used. By changing the NAND frequency select without reflecting
this in the clock configuration this means that the timings calculated
don't correctly meet the requirements of the NAND chip. This hasn't been
an issue up to now because of a different bug that was stopping the
timings being updated after they were initially set.
Fixes: b25251414f6e ("mtd: rawnand: marvell: Stop implementing ->select_chip()")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230525003154.2303012-2-chris.packham@alliedtelesis.co.nz
|
|
When new timing values are calculated in marvell_nfc_setup_interface()
ensure that they will be applied in marvell_nfc_select_target() by
clearing the selected_chip pointer.
Fixes: b25251414f6e ("mtd: rawnand: marvell: Stop implementing ->select_chip()")
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230525003154.2303012-1-chris.packham@alliedtelesis.co.nz
|
|
The addition of the mtdchar_read_ioctl() function caused the stack usage
of mtdchar_ioctl() to grow beyond the warning limit on 32-bit architectures
with gcc-13:
drivers/mtd/mtdchar.c: In function 'mtdchar_ioctl':
drivers/mtd/mtdchar.c:1229:1: error: the frame size of 1488 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Mark both the read and write portions as noinline_for_stack to ensure
they don't get inlined and use separate stack slots to reduce the
maximum usage, both in the mtdchar_ioctl() and combined with any
of its callees.
Fixes: 095bb6e44eb1 ("mtdchar: add MEMREAD ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230417205654.1982368-1-arnd@kernel.org
|
|
We failed to initialize n_banks for spi-nor-generic flashes, which
caused a devide by zero when computing the bank_size.
By default we consider that all chips have a single bank. Initialize
the default number of banks for spi-nor-generic flashes. Even if the
bug is fixed with this simple initialization, check the n_banks value
before dividing so that we make sure this kind of bug won't occur again
if some other struct instance is created uninitialized.
Suggested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217448
Fixes: 9d6c5d64f028 ("mtd: spi-nor: Introduce the concept of bank")
Link: https://lore.kernel.org/all/20230516225108.29194-1-todd.e.brandt@intel.com/
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230518085440.2363676-1-tudor.ambarus@linaro.org
|
|
A few functions provide an empty interface definition when
CONFIG_MTD_NAND_INGENIC_ECC is disabled, but they are accidentally
defined as global functions in the header:
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:39:5: error: no previous prototype for 'ingenic_ecc_calculate'
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:46:5: error: no previous prototype for 'ingenic_ecc_correct'
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:53:6: error: no previous prototype for 'ingenic_ecc_release'
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:57:21: error: no previous prototype for 'of_ingenic_ecc_get'
Turn them into 'static inline' definitions instead.
Fixes: 15de8c6efd0e ("mtd: rawnand: ingenic: Separate top-level and SoC specific code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230516202133.559488-1-arnd@kernel.org
|
|
Following errors were seen with um-x86_64-gcc12/um-allyesconfig:
+ /kisskb/src/drivers/mtd/spi-nor/spansion.c: error: 'op' is used uninitialized [-Werror=uninitialized]: => 495:27, 364:27
Initialise local struct spi_mem_op with all zeros at declaration in
order to avoid using garbage data for fields that are not explicitly
set afterwards.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: c87c9b11c53ce ("mtd: spi-nor: spansion: Determine current address mode")
Fixes: 6afcc84080c41 ("mtd: spi-nor: spansion: Add support for Infineon S25FS256T")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230509193900.948753-1-tudor.ambarus@linaro.org
|
|
This is 2Gb SLC NAND flash with 4b/512b on-die ECC capability.
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230525110526.21998-1-quic_mdalam@quicinc.com
|
|
Use the devm_clk_get_enabled() helper function instead of hand-writing it.
It saves some line of codes.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/4025ec3980a956b0e776024e88ec960afc457501.1681636580.git.christophe.jaillet@wanadoo.fr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Fix error value for try_write_vid_and_data()
- Minor cleanups
UBIFS:
- Fixes for various memory leaks
- Minor cleanups"
* tag 'ubifs-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: Fix memleak when insert_old_idx() failed
Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path"
ubifs: Fix memory leak in do_rename
ubifs: Free memory for tmpfile name
ubi: Fix return value overwrite issue in try_write_vid_and_data()
ubifs: Remove return in compr_exit()
ubi: Simplify bool conversion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A fairly standard release for SPI with the exception of a change to
the API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily
for a while.
There's also a new API to allow us to support TPM chips on half duplex
controllers.
Summary:
- Refactoring in preparation for supporting multiple chip selects for
a single device, needed by some flash devices, which required a
change in the SPI device API visible throughout the tree
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI
- Optimisation for large transfers on fsl-cpm devices
- Cleanups around device property use which fix some sisues with
fwnode
- Use of both void remove() and devm_platform_.*ioremap_resource()
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI"
* tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits)
spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: tegra210-quad: Enable TPM wait polling
spi: Add TPM HW flow flag
spi: bcm63xx: remove PM_SLEEP based conditional compilation
spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: spi-cadence: Add support for Slave mode
spi: spi-cadence: Switch to spi_controller structure
spi: cadence-quadspi: fix suspend-resume implementations
spi: dw: Add support for AMD Pensando Elba SoC
spi: dw: Add AMD Pensando Elba SoC SPI Controller
spi: cadence-quadspi: Disable the SPI before reconfiguring
spi: cadence-quadspi: Update the read timeout based on the length
spi: spi-loopback-test: Add module param for iteration length
spi: add support for Amlogic A1 SPI Flash Controller
dt-bindings: spi: add Amlogic A1 SPI controller
spi: fsl-spi: No need to check transfer length versus word size
spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void
spi: fsl-cpm: Use 16 bit mode for large transfers with even size
spi: fsl-spi: Re-organise transfer bits_per_word adaptation
spi: fsl-spi: Fix CPM/QE mode Litte Endian
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"Core MTD changes:
- dt-bindings: Drop unneeded quotes
- mtdblock: Tolerate corrected bit-flips
- Use of_property_read_bool() for boolean properties
- Avoid magic values
- Avoid printing error messages on probe deferrals
- Prepare mtd_otp_nvmem_add() to handle -EPROBE_DEFER
- Fix error path for nvmem provider
- Fix nvmem error reporting
- Provide unique name for nvmem device
MTD device changes:
- lpddr_cmds: Remove unused words variable
- bcm63xxpart: Remove MODULE_LICENSE in non-modules
SPI NOR core changes:
- Introduce Read While Write support for flashes featuring several
banks
- Set the 4-Byte Address Mode method based on SFDP data
- Allow post_sfdp hook to return errors
- Parse SCCR MC table and introduce support for multi-chip devices
SPI NOR manufacturer drivers changes:
- macronix: Add support for mx25uw51245g with RWW
- spansion:
- Determine current address mode at runtime as it can be changed
in a non-volatile way and differ from factory defaults or from
what SFDP advertises.
- Enable JFFS2 write buffer mode for few ECC'd NOR flashes:
S25FS256T, s25hx and s28hx
- Add support for s25hl02gt and s25hs02gt
Raw NAND core changes:
- Convert to platform remove callback returning void
- Fix spelling mistake waifunc() -> waitfunc()
Raw NAND controller driver changes:
- imx: Remove unused is_imx51_nfc and imx53_nfc functions
- omap2: Drop obsolete dependency on COMPILE_TEST
- orion: Use devm_platform_ioremap_resource()
- qcom:
- Use of_property_present() for testing DT property presence
- Use devm_platform_get_and_ioremap_resource()
- stm32_fmc2: Depends on ARCH_STM32 instead of MACH_STM32MP157
- tmio: Remove reference to config MTD_NAND_TMIO in the parsers
Raw NAND manufacturer driver changes:
- hynix: Fix up bit 0 of sdr_timing_mode
SPI-NAND changes:
- Add support for ESMT F50x1G41LB"
* tag 'mtd/for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (55 commits)
mtd: nand: Convert to platform remove callback returning void
mtd: onenand: omap2: Drop obsolete dependency on COMPILE_TEST
mtd: spi-nor: spansion: Add support for s25hl02gt and s25hs02gt
mtd: spi-nor: spansion: Add a new ->ready() hook for multi-chip device
mtd: spi-nor: spansion: Rework cypress_nor_quad_enable_volatile() for multi-chip device support
mtd: spi-nor: spansion: Rework cypress_nor_get_page_size() for multi-chip device support
mtd: spi-nor: sfdp: Add support for SCCR map for multi-chip device
mtd: spi-nor: Extract volatile register offset from SCCR map
mtd: spi-nor: Allow post_sfdp hook to return errors
mtd: spi-nor: spansion: Rename method to cypress_nor_get_page_size
mtd: spi-nor: spansion: Enable JFFS2 write buffer for S25FS256T
mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s25hx SEMPER flash
mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s28hx SEMPER flash
mtd: spi-nor: spansion: Determine current address mode
mtd: spi-nor: core: Introduce spi_nor_set_4byte_addr_mode()
mtd: spi-nor: core: Update flash's current address mode when changing address mode
mtd: spi-nor: Stop exporting spi_nor_restore()
mtd: spi-nor: Set the 4-Byte Address Mode method based on SFDP data
mtd: spi-nor: core: Make spi_nor_set_4byte_addr_mode_brwr public
mtd: spi-nor: core: Update name and description of spi_nor_set_4byte_addr_mode
...
|
|
The commit 2d78aee426d8 ("UBI: simplify LEB write and atomic LEB change code")
adds helper function, try_write_vid_and_data(), to simplify the code, but this
helper function has bug, it will return 0 (success) when ubi_io_write_vid_hdr()
or the ubi_io_write_data() return error number (-EIO, etc), because the return
value of ubi_wl_put_peb() will overwrite the original return value.
This issue will cause unexpected data loss issue, because the caller of this
function and UBIFS willn't know the data is lost.
Fixes: 2d78aee426d8 ("UBI: simplify LEB write and atomic LEB change code")
Cc: stable@vger.kernel.org
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
./drivers/mtd/ubi/build.c:1261:33-38: WARNING: conversion to bool not needed here
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4061
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Raw NAND core changes:
* Convert to platform remove callback returning void
* Fix spelling mistake waifunc() -> waitfunc()
Raw NAND controller driver changes:
* imx: Remove unused is_imx51_nfc and imx53_nfc functions
* omap2: Drop obsolete dependency on COMPILE_TEST
* orion: Use devm_platform_ioremap_resource()
* qcom:
- Use of_property_present() for testing DT property presence
- Use devm_platform_get_and_ioremap_resource()
* stm32_fmc2: Depends on ARCH_STM32 instead of MACH_STM32MP157
* tmio: Remove reference to config MTD_NAND_TMIO in the parsers
Raw NAND manufacturer driver changes:
* hynix: Fix up bit 0 of sdr_timing_mode
SPI-NAND changes:
* Add support for ESMT F50x1G41LB
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
