| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The most notable updates this time are for Qualcomm Snapdragon
platforms. The Inline-Crypto-Engine gets a new DT binding and driver,
and a number of drivers now support additional Snapdragon variants, in
particular the rsc, scm, geni, bwm, glink and socinfo, while the llcc
(edac) and rpm drivers get notable functionality updates.
Updates on other platforms include:
- Various updates to the Mediatek mutex and mmsys drivers, including
support for the Helio X10 SoC
- Support for unidirectional mailbox channels in Arm SCMI firmware
- Support for per cpu asynchronous notification in OP-TEE firmware
- Minor updates for memory controller drivers.
- Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra,
Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX
SoC drivers, mainly updating the use of MODULE_LICENSE() macros and
obsolete DT driver interfaces"
* tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: ti: smartreflex: Simplify getting the opam_sr pointer
bus: vexpress-config: Add explicit of_platform.h include
soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS
memory: mtk-smi: mt8365: Add SMI Support
dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365
dt-bindings: memory-controllers: mediatek,smi-common: add mt8365
memory: tegra: read values from correct device
dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
dt-bindings: firmware: document Qualcomm QCM2290 SCM
soc: qcom: rpmh-rsc: Support RSC v3 minor versions
soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
soc/tegra: fuse: Remove nvmem root only access
soc/tegra: cbb: tegra194: Use of_address_count() helper
soc/tegra: cbb: Remove MODULE_LICENSE in non-modules
ARM: tegra: Remove MODULE_LICENSE in non-modules
soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource()
soc: tegra: cbb: Drop empty platform remove function
firmware: arm_scmi: Add support for unidirectional mailbox channels
dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels
...
|
|
Add MT8365 SMI common support.
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230407-smi-driver-v2-1-8da6683cdb5c@baylibre.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
When reading MR18 for Dev1 the code was incorrectly reading the
value corresponding to Dev0, so fix this by adjusting the index
according to the Tegra X1 TRM.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230322234050.47332-1-diogo.ivo@tecnico.ulisboa.pt
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
To be able to compile the driver on all STM32MP SOCs, we move the
"depends on" on ARCH_STM32.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/r/20230324155105.826063-2-christophe.kerello@foss.st.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
tegra210_emc_table_device_init() sets count = 0 twice, so
remove the second instance.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20230319171303.120777-1-diogo.ivo@tecnico.ulisboa.pt
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: d5ef16ba5fbe ("memory: tegra20: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-21-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: d5ef16ba5fbe ("memory: tegra20: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-20-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 380def2d4cf2 ("memory: tegra124: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.12
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-19-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 06f079816d4c ("memory: tegra-mc: Add interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-18-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144711.1543295-1-robh@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Since commit 8b41fc4454e3 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Link: https://lore.kernel.org/r/20230308202117.426808-2-nick.alcock@oracle.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Since commit 8b41fc4454e3 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230308202117.426808-1-nick.alcock@oracle.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
|
|
The dummy cycles value was wrongly calculated if dummy.buswidth > 1,
which affects QSPI, OSPI, HyperFlash on various SoCs. We're lucky in
Single SPI case since its dummy.buswidth equals to 1, so the result of
the division is unchanged
This issue can be reproduced using something like the following commands
A. QSPI mode: Mount device with jffs2 format
jffs2: CLEANMARKER node found at 0x00000004, not first node in block (0x00000000)
B. QSPI mode: Write data to mtd10, where mtd10 is a parition on SPI Flash
storage, defined properly in a device tree
[Correct fragment, read from SPI Flash]
root@v3x:~# echo "hello" > /dev/mtd10
root@v3x:~# hexdump -C -n100 /dev/mtd10
00000000 68 65 6c 6c 6f 0a ff ff ff ff ff ff ff ff ff ff |hello...........|
00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
[Incorrect read of the same fragment: see the difference at offsets 0-3]
root@v3x:~# echo "hello" > /dev/mtd10
root@v3x:~# hexdump -C -n100 /dev/mtd10
00000000 00 00 00 00 68 65 6c 6c 6f 0a ff ff ff ff ff ff |....hello.......|
00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
As seen from the result, 4 NULL bytes were inserted before the test data.
Wrong calculation in rpcif_prepare() led to miss of some dummy cycle. A
division by bus width is redundant because it had been performed already
in spi-rpc-if.c::rpcif_spi_mem_prepare()
Fix this by removing the redundant division.
Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20230112090655.43367-1-wsa+renesas@sang-engineering.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230207173051.449151-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Directly get the match data with device_get_match_data().
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202211171939327684154@zte.com.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Most rpcif_*() API functions do not need access to any other fields in
the rpcif structure than the device pointer. Simplify dependencies by
passing the device pointer instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/0460fe82ba348cedec7a9a75a8eff762c50e817b.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Convert from the deprecated pm_runtime_get_sync() to the new
pm_runtime_resume_and_get(), and add error checking.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/6f2bd3b2b3d98c5bed541d969900b2ad04f93943.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
rpcif_probe() already has a "dev" variable pointing to the right device
structure, so there is no need to take a detour through the platform
device.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/298009c43ad119703f564c0f1864743914b4beeb.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
While the acquired resources are tied to the lifetime of the RPC-IF core
device (through the use of managed resource functions), the actual
resource acquisition is triggered from the HyperBus and SPI child
drivers. Due to this mismatch, unbinding and rebinding the child
drivers manually fails with -EBUSY:
# echo rpc-if-hyperflash > /sys/bus/platform/drivers/rpc-if-hyperflash/unbind
# echo rpc-if-hyperflash > /sys/bus/platform/drivers/rpc-if-hyperflash/bind
rpc-if ee200000.spi: can't request region for resource [mem 0xee200000-0xee2001ff]
rpc-if-hyperflash: probe of rpc-if-hyperflash failed with error -16
The same is true for rpc-if-spi.
Fix this by moving all resource acquisition to the core driver's probe
routine.
Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/c1012ef1de799e08a70817ab7313794e2d8d7bfb.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The rpcif structure is used as a common data structure, shared by the
RPC-IF core driver and by the HyperBus and SPI child drivers.
This poses several problems:
- Most structure members describe private core driver state, which
should not be accessible by the child drivers,
- The structure's lifetime is controlled by the child drivers,
complicating use by the core driver.
Fix this by moving the private core driver state to its own structure,
managed by the RPC-IF core driver, and store it in the core driver's
private data field. This requires absorbing the child's platform
device, as that was stored in the driver's private data field before.
Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/09fbb6fa67d5a8cd48a08808c9afa2f6a499aa42.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The clk_disable_unprepare() should be called in the error handling
of devbus_get_timing_params() and of_platform_populate(), fix it by
replacing devm_clk_get and clk_prepare_enable by devm_clk_get_enabled.
Fixes: e81b6abebc87 ("memory: add a driver for atmel ram controllers")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221126044911.7226-1-cuigaosheng1@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The clk_disable_unprepare() should be called in the error handling
of caps->has_mpddr_clk, fix it by replacing devm_clk_get and
clk_prepare_enable by devm_clk_get_enabled.
Fixes: e81b6abebc87 ("memory: add a driver for atmel ram controllers")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221125073757.3535219-1-cuigaosheng1@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
On newer Tegra releases, early boot SID override programming and SID
override programming during resume is handled by bootloader.
In the function tegra186_mc_program_sid() which is getting removed, SID
override register of all clients is written without checking if secure
firmware has allowed write on it or not. If write is disabled by secure
firmware then it can lead to errors coming from secure firmware and hang
in kernel boot.
Also, SID override is programmed on-demand during probe_finalize() call
of IOMMU which is done in tegra186_mc_client_sid_override() in this same
file. This function does it correctly by checking if write is permitted
on SID override register. It also checks if SID override register is
already written with correct value and skips re-writing it in that case.
Fixes: 393d66fd2cac ("memory: tegra: Implement SID override programming")
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221125040752.12627-1-amhetre@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
This bug has been introduced after switching from -1 to UINT_MAX
for GPMC_WAITPIN_INVALID.
The bug leads to an error when the optional gpmc,wait-pin
dt-property is not used:
...
gpmc_cs_program_settings: invalid wait-pin (-1)
...
Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@siemens.com>
Fixes: 8dd7e4af5853 ("memory: omap-gpmc: fix coverity issue "Control flow issues"")
Acked-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221209112828.581491-1-benedikt.niedermayr@siemens.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Pull ARM updates from Russell King:
- update unwinder to cope with module PLTs
- enable UBSAN on ARM
- improve kernel fault message
- update UEFI runtime page tables dump
- avoid clang's __aeabi_uldivmod generated in NWFPE code
- disable FIQs on CPU shutdown paths
- update XOR register usage
- a number of build updates (using .arch, thread pointer, removal of
lazy evaluation in Makefile)
- conversion of stacktrace code to stackwalk
- findbit assembly updates
- hwcap feature updates for ARMv8 CPUs
- instruction dump updates for big-endian platforms
- support for function error injection
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits)
ARM: 9279/1: support function error injection
ARM: 9277/1: Make the dumped instructions are consistent with the disassembled ones
ARM: 9276/1: Refactor dump_instr()
ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA
ARM: 9274/1: Add hwcap for Speculative Store Bypassing Safe
ARM: 9273/1: Add hwcap for Speculation Barrier(SB)
ARM: 9272/1: vfp: Add hwcap for FEAT_AA32I8MM
ARM: 9271/1: vfp: Add hwcap for FEAT_AA32BF16
ARM: 9270/1: vfp: Add hwcap for FEAT_FHM
ARM: 9269/1: vfp: Add hwcap for FEAT_DotProd
ARM: 9268/1: vfp: Add hwcap FPHP and ASIMDHP for FEAT_FP16
ARM: 9267/1: Define Armv8 registers in AArch32 state
ARM: findbit: add unwinder information
ARM: findbit: operate by words
ARM: findbit: convert to macros
ARM: findbit: provide more efficient ARMv7 implementation
ARM: findbit: document ARMv5 bit offset calculation
ARM: 9259/1: stacktrace: Convert stacktrace to generic ARCH_STACKWALK
ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code
ARM: 9265/1: pass -march= only to compiler
...
|
|
Pull drm updates from Dave Airlie:
"The biggest highlight is that the accel subsystem framework is merged.
Hopefully for 6.3 we will be able to line up a driver to use it.
In drivers land, i915 enables DG2 support by default now, and nouveau
has a big stability refactoring and initial ampere support, AMD
includes new hw IP support and should build on ARM again. There is
also an ofdrm driver to take over offb on platforms it's used.
Stuff outside my tree, the dma-buf patches hit a few places, the vc4
firmware changes also do, and i915 has some interactions with MEI for
discrete GPUs. I think all of those should have been acked/reviewed by
relevant parties.
New driver:
- ofdrm - replacement for offb
fbdev:
- add support for nomodeset
fourcc:
- add Vivante tiled modifier
core:
- atomic-helpers: CRTC primary plane test fixes, fb access hooks
- connector: TV API consistency, cmdline parser improvements
- send connector hotplug on cleanup
- sort makefile objects
tests:
- sort kunit tests
- improve DP-MST tests
- add kunit helpers to create a device
sched:
- module param for scheduling policy
- refcounting fix
buddy:
- add back random seed log
ttm:
- convert ttm_resource to size_t
- optimize pool allocations
edid:
- HFVSDB parsing support fixes
- logging/debug improvements
- DSC quirks
dma-buf:
- Add unlocked vmap and attachment mapping
- move drivers to common locking convention
- locking improvements
firmware:
- new API for rPI firmware and vc4
xilinx:
- zynqmp: displayport bridge support
- dpsub fix
bridge:
- adv7533: Remove dynamic lane switching
- it6505: Runtime PM support, sync improvements
- ps8640: Handle AUX defer messages
- tc358775: Drop soft-reset over I2C
panel:
- panel-edp: Add INX N116BGE-EA2 C2 and C4 support.
- Jadard JD9365DA-H3
- NewVision NV3051D
amdgpu:
- DCN support on ARM
- DCN 2.1 secure display
- Sienna Cichlid mode2 reset fixes
- new GC 11.x firmware versions
- drop AMD specific DSC workarounds in favour of drm code
- clang warning fixes
- scheduler rework
- SR-IOV fixes
- GPUVM locking fixes
- fix memory leak in CS IOCTL error path
- flexible array updates
- enable new GC/PSP/SMU/NBIO IP
- GFX preemption support for gfx9
amdkfd:
- cache size fixes
- userptr fixes
- enable cooperative launch on gfx 10.3
- enable GC 11.0.4 KFD support
radeon:
- replace kmap with kmap_local_page
- ACPI ref count fix
- HDA audio notifier support
i915:
- DG2 enabled by default
- MTL enablement work
- hotplug refactoring
- VBT improvements
- Display and watermark refactoring
- ADL-P workaround
- temp disable runtime_pm for discrete-
- fix for A380 as a secondary GPU
- Wa_18017747507 for DG2
- CS timestamp support fixes for gen5 and earlier
- never purge busy TTM objects
- use i915_sg_dma_sizes for all backends
- demote GuC kernel contexts to normal priority
- gvt: refactor for new MDEV interface
- enable DC power states on eDP ports
- fix gen 2/3 workarounds
nouveau:
- fix page fault handling
- Ampere acceleration support
- driver stability improvements
- nva3 backlight support
msm:
- MSM_INFO_GET_FLAGS support
- DPU: XR30 and P010 image formats
- Qualcomm SM6115 support
- DSI PHY support for QCM2290
- HDMI: refactored dev init path
- remove exclusive-fence hack
- fix speed-bin detection
- enable clamp to idle on 7c3
- improved hangcheck detection
vmwgfx:
- fb and cursor refactoring
- convert to generic hashtable
- cursor improvements
etnaviv:
- hw workarounds
- softpin MMU fixes
ast:
- atomic gamma LUT support
- convert to SHMEM
lcdif:
- support YUV planes
- Increase DMA burst size
- FIFO threshold tuning
meson:
- fix return type of cvbs mode_valid
mgag200:
- fix PLL setup on some revisions
sun4i:
- A100 and D1 support
udl:
- modesetting improvements
- hot unplug support
vc4:
- support PAL-M
- fix regression preventing 4K @ 60Hz
- fix NULL ptr deref
v3d:
- switch to drm managed resources
renesas:
- RZ/G2L DSI support
- DU Kconfig cleanup
mediatek:
- fixup dpi and hdmi
- MT8188 dpi support
- MT8195 AFBC support
tegra:
- NVDEC hardware on Tegra234 SoC
hdlcd:
- switch to drm managed resources
ingenic:
- fix registration error path
hisilicon:
- convert to drm_mode_init
maildp:
- use managed resources
mtk:
- use drm_mode_init
rockchip:
- use drm_mode_copy"
* tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm: (1397 commits)
drm/amdgpu: fix mmhub register base coding error
drm/amdgpu: add tmz support for GC IP v11.0.4
drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.4
drm/amdgpu: enable GFX Power Gating for GC IP v11.0.4
drm/amdgpu: enable GFX IP v11.0.4 CG support
drm/amdgpu: Make amdgpu_ring_mux functions as static
drm/amdgpu: generally allow over-commit during BO allocation
drm/amd/display: fix array index out of bound error in DCN32 DML
drm/amd/display: 3.2.215
drm/amd/display: set optimized required for comp buf changes
drm/amd/display: Add debug option to skip PSR CRTC disable
drm/amd/display: correct DML calc error of UrgentLatency
drm/amd/display: correct static_screen_event_mask
drm/amd/display: Ensure commit_streams returns the DC return code
drm/amd/display: read invalid ddc pin status cause engine busy
drm/amd/display: Bypass DET swath fill check for max clocks
drm/amd/display: Disable uclk pstate for subvp pipes
drm/amd/display: Fix DCN2.1 default DSC clocks
drm/amd/display: Enable dp_hdmi21_pcon support
drm/amd/display: prevent seamless boot on displays that don't have the preferred dig
...
|
|
On Tegra234 NVDEC firmware is loaded from a secure carveout, where it
has been loaded by a bootloader. When booting NVDEC, we need to tell it
the address of this firmware, which we can determine by checking the
starting address of the carveout. As such, add an MC API to query the
bounds of carveouts, and add related information on Tegra234.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
memory: tegra: Changes for v6.2-rc1
Some cleanups replace open-coded debugfs attributes and memory client
IDs are added for the DLA IP found on Tegra234 SoCs.
* tag 'tegra-for-6.2-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Add DLA clients for Tegra234
memory: tegra186-emc: Use DEFINE_SHOW_ATTRIBUTE to simplify code
memory: tegra210-emc: Use DEFINE_SHOW_ATTRIBUTE to simplify code
memory: tegra30-emc: Use DEFINE_SHOW_ATTRIBUTE to simplify code
memory: tegra20-emc: Use DEFINE_SHOW_ATTRIBUTE to simplify code
dt-bindings: tegra: Update headers for Tegra234
dt-bindings: Add headers for NVDEC on Tegra234
Link: https://lore.kernel.org/r/20221121171239.2041835-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the memory clients on Tegra234 which are needed for initialising the
SMMU for the Deep Learning Accelerator (DLA).
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Assign a big positive integer instead of an negative integer to an
u32 variable. Also remove the check for ">= 0" which doesn't make sense
for unsigned integers.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527139 ("Control flow issues")
Fixes: 89aed3cd5cb9 ("memory: omap-gpmc: wait pin additions")
Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20221109102454.174320-1-benedikt.niedermayr@siemens.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Similar to commit a6c30873ee4a ("ARM: 8989/1: use .fpu assembler
directives instead of assembler arguments").
GCC and GNU binutils support setting the "sub arch" via -march=,
-Wa,-march, target function attribute, and .arch assembler directive.
Clang was missing support for -Wa,-march=, but this was implemented in
clang-13.
The behavior of both GCC and Clang is to
prefer -Wa,-march= over -march= for assembler and assembler-with-cpp
sources, but Clang will warn about the -march= being unused.
clang: warning: argument unused during compilation: '-march=armv6k'
[-Wunused-command-line-argument]
Since most assembler is non-conditionally assembled with one sub arch
(modulo arch/arm/delay-loop.S which conditionally is assembled as armv4
based on CONFIG_ARCH_RPC, and arch/arm/mach-at91/pm-suspend.S which is
conditionally assembled as armv7-a based on CONFIG_CPU_V7), prefer the
.arch assembler directive.
Add a few more instances found in compile testing as found by Arnd and
Nathan.
Link: https://github.com/llvm/llvm-project/commit/1d51c699b9e2ebc5bcfdbe85c74cc871426333d4
Link: https://bugs.llvm.org/show_bug.cgi?id=48894
Link: https://github.com/ClangBuiltLinux/linux/issues/1195
Link: https://github.com/ClangBuiltLinux/linux/issues/1315
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
This patch introduces support for setting the wait-pin polarity as well
as using the same wait-pin for different CS regions.
The waitpin polarity can be configured via the WAITPIN<X>POLARITY bits
in the GPMC_CONFIG register. This is currently not supported by the
driver. This patch adds support for setting the required register bits
with the "ti,wait-pin-polarity" dt-property.
The wait-pin can also be shared between different CS regions for special
usecases. Therefore GPMC must keep track of wait-pin allocations, so it
knows that either GPMC itself or another driver has the ownership.
Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@siemens.com>
Link: https://lore.kernel.org/r/20221102133047.1654449-2-benedikt.niedermayr@siemens.com
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The SPI Multi I/O Bus Controller (RPC-IF) on R-Car Gen4 SoCs is very
similar to the RPC-IF on R-Car Gen3 SoCs. It does support four instead
of three bits of strobe timing adjustment (STRTIM), and thus requires a
new mask and new settings.
Inspired by a patch in the BSP by Cong Dang.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/4d0824bf5ed0fb95c51cd36f9a3f0f562b1a6bf8.1665583089.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
According to the datasheet, HS bit should be specified to 1 when using
DMA transfer. As DMA transfer is not supported, it should be cleared to
0.
Previously, the driver relied on the HS bit being cleared by prior
firmware but this is not always the case.
Fix this by ensuring the bit is cleared during hardware initialization.
Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/08d9fb10b3051decebf871267a6e2e7cb2d4faf9.1665583089.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
No functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220926130025.1061373-5-liushixin2@huawei.com
|
|
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
No functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220926130025.1061373-4-liushixin2@huawei.com
|
|
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
No functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220926130025.1061373-3-liushixin2@huawei.com
|
|
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
No functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220926130025.1061373-2-liushixin2@huawei.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v6.1 - MediaTek
Add support for the mt8188 SMI memory controller.
* tag 'memory-controller-drv-mediatek-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: mtk-smi: mt8188: Add SMI Support
memory: mtk-smi: Add enable IOMMU SMC command for MM master
memory: mtk-smi: Add return value for configure port function
dt-bindings: memory: mediatek: Add mt8188 smi binding
Link: https://lore.kernel.org/r/20220909153037.824092-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v6.1 - Broadcom
Add support for the Broadcom STB memory controller (BRCMSTB_MEMC).
* tag 'memory-controller-drv-brcm-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: brcmstb_memc: Add Broadcom STB memory controller driver
Documentation: sysfs: Document Broadcom STB memc sysfs knobs
dt-bindings: memory-controller: Document Broadcom STB MEMC
Link: https://lore.kernel.org/r/20220909153037.824092-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add mt8188 smi common & larb support
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220817124608.10062-5-chengci.xu@mediatek.com
|
|
For concerns about security, the register to enable/disable IOMMU of
SMI LARB should only be configured in secure world. Thus, we add some
SMC command for multimedia master to enable/disable MM IOMMU in ATF by
setting the register of SMI LARB. This function is prepared for MT8188.
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220817124608.10062-4-chengci.xu@mediatek.com
|
|
In MT8188, the register to enable/disable IOMMU can only be configured
in secure world by SMC call. We should add a return value for configure
port function for preparation because SMC call may return an error result.
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220817124608.10062-3-chengci.xu@mediatek.com
|
|
Add support for configuring the Self Refresh Power Down (SRPD)
inactivity timeout on Broadcom STB chips. This is used to conserve power
when the DRAM activity is reduced.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220812222533.2428033-4-f.fainelli@gmail.com
|
|
We should add the of_node_put() when breaking out of
for_each_child_of_node() as it will automatically increase
and decrease the refcount.
Fixes: 976897dd96db ("memory: Extend of_memory with LPDDR3 support")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220719085640.1210583-2-windhl@126.com
|
|
We should add the of_node_put() when breaking out of
for_each_child_of_node() as it will automatically increase
and decrease the refcount.
Fixes: e6b42eb6a66c ("memory: emif: add device tree support to emif driver")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220719085640.1210583-1-windhl@126.com
|
