| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
"Rework of the MSI interrupt infrastructure.
This is a treewide cleanup and consolidation of MSI interrupt handling
in preparation for further changes in this area which are necessary
to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space"
* tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits)
genirq/msi: Populate sysfs entry only once
PCI/MSI: Unbreak pci_irq_get_affinity()
genirq/msi: Convert storage to xarray
genirq/msi: Simplify sysfs handling
genirq/msi: Add abuse prevention comment to msi header
genirq/msi: Mop up old interfaces
genirq/msi: Convert to new functions
genirq/msi: Make interrupt allocation less convoluted
platform-msi: Simplify platform device MSI code
platform-msi: Let core code handle MSI descriptors
bus: fsl-mc-msi: Simplify MSI descriptor handling
soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs()
soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation
NTB/msi: Convert to msi_on_each_desc()
PCI: hv: Rework MSI handling
powerpc/mpic_u3msi: Use msi_for_each-desc()
powerpc/fsl_msi: Use msi_for_each_desc()
powerpc/pasemi/msi: Convert to msi_on_each_dec()
powerpc/cell/axon_msi: Convert to msi_on_each_desc()
powerpc/4xx/hsta: Rework MSI handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- Fix GICv3 redistributor table reservation with RT across kexec
- Fix GICv4.1 redistributor view of the VPE table across kexec
- Add support for extra interrupts on spear-shirq
- Make obtaining some interrupts optional for the Renesas drivers
- Various cleanups and bug fixes
Link: https://lore.kernel.org/lkml/20220108130807.4109738-1-maz@kernel.org
|
|
* irq/misc-5.17:
: .
: Misc irqchip fixes:
:
: - Disable GICv4.1 RD's VPE table at boot time to avoid RAS errors
: - Fix Ingenic TCU's u32/unsigned long abuse
: - Some GICv2m constifying
: - Mark imx_gpcv2_instance as __ro_after_init
: - Enable a few missing IRQs on Spear
: - Conversion to platform_get_irq_optional() for the Renesas irqchips
: .
irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the interrupt
irqchip/renesas-irqc: Use platform_get_irq_optional() to get the interrupt
irqchip/gic-v4: Disable redistributors' view of the VPE table at boot time
irqchip/ingenic-tcu: Use correctly sized arguments for bit field
irqchip/gic-v2m: Add const to of_device_id
irqchip/imx-gpcv2: Mark imx_gpcv2_instance with __ro_after_init
irqchip/spear-shirq: Add support for IRQ 0..6
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211216182121.5323-1-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211216182121.5323-2-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Use the common msi_index member and get rid of the pointless wrapper struct.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20211210221814.540704224@linutronix.de
|
|
It's hard to distinguish what platform_msi_domain_alloc() and
platform_msi_domain_alloc_irqs() are about. Make the distinction more
explicit and add comments which explain the use cases properly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211210221814.228706214@linutronix.de
|
|
The only unconditional part of MSI data in struct device is the irqdomain
pointer. Everything else can be allocated on demand. Create a data
structure and move the irqdomain pointer into it. The other MSI specific
parts are going to be removed from struct device in later steps.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211210221813.617178827@linutronix.de
|
|
Jay Chen reported that using a kdump kernel on a GICv4.1 system
results in a RAS error being delivered when the secondary kernel
configures the ITS's view of the new VPE table.
As it turns out, that's because each RD still has a pointer to
the previous instance of the VPE table, and that particular
implementation is very upset by seeing two bits of the HW that
should point to the same table with different values.
To solve this, let's invalidate any reference that any RD has to
the VPE table when discovering the RDs. The ITS can then be
programmed as expected.
Reported-by: Jay Chen <jkchen@linux.alibaba.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20211214064716.21407-1-jkchen@linux.alibaba.com
Link: https://lore.kernel.org/r/20211216144804.1578566-1-maz@kernel.org
|
|
The find.h APIs are designed to be used only on unsigned long arguments.
This can technically result in a over-read, but it is harmless in this
case. Regardless, fix it to avoid the warning seen under -Warray-bounds,
which we'd like to enable globally:
In file included from ./include/linux/bitmap.h:9,
from ./include/linux/cpumask.h:12,
from ./include/linux/smp.h:13,
from ./include/linux/lockdep.h:14,
from ./include/linux/mutex.h:17,
from ./include/linux/notifier.h:14,
from ./include/linux/clk.h:14,
from drivers/irqchip/irq-ingenic-tcu.c:7:
drivers/irqchip/irq-ingenic-tcu.c: In function 'ingenic_tcu_intc_cascade':
./include/linux/find.h:40:23: warning: array subscript 'long unsigned int[0]' is partly outside array bounds of 'uint32_t[1]' {aka 'unsigned int[1]'} [-Warray-bounds]
40 | val = *addr & GENMASK(size - 1, offset);
| ^~~~~
drivers/irqchip/irq-ingenic-tcu.c:30:18: note: while referencing 'irq_reg'
30 | uint32_t irq_reg, irq_mask;
| ^~~~~~~
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215232457.2069969-1-keescook@chromium.org
|
|
struct of_device_id should normally be const.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211209132453.25623-1-wangxiang@cdjrlc.com
|
|
imx_gpcv2_instance will not be updated after init, so mark it with
__ro_after_init.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211214084711.1357325-1-peng.fan@oss.nxp.com
|
|
IRQ 0..7 are not supported by the driver for SPEAr320 SOC family.
IRQ 0 is not reserved in SPEAr320 SOC (assigned to GPIOINT).
Furthermore, in SPEAr320s SOC variant, IRQ 0..6 are assigned
as follow:
IRQ 6 - NGPIO_INTR: Combined status of edge programmable
interrupts from GPIO ports
IRQ 5 - TX_OR_INTR: I2S interrupt on Transmit FIFO overrun
IRQ 4 - TX_EMP_INTR: I2S interrupt on Transmit FIFO empty
IRQ 3 - RX_OR_INTR: I2S interrupt on Receive FIFO overrun
IRQ 2 - RX_DA_INTR: I2S interrupt on data available in Receive FIFO
IRQ 1 - Reserved
IRQ 0 - GPIO_INTR: Legacy interrupt from GPIO ports
Add support for these IRQs in SPEAr320 SOC family.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211202095255.165797-6-herve.codina@bootlin.com
|
|
The new memreserve cpuhp callback only needs to survive up until a point
where every CPU in the system has booted once. Beyond that, it becomes a
no-op and can be put in the bin.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211027151506.2085066-4-valentin.schneider@arm.com
|
|
Memory used by the LPI tables have to be made persistent for kexec to have
a chance to work, as explained in [1]. If they have been made persistent
and we are booting into a kexec'd kernel, we also need to free the pages
that were preemptively allocated by the new kernel for those tables.
Both of those operations currently happen during its_cpu_init(), which
happens in a _STARTING (IOW atomic) cpuhp callback for secondary
CPUs. efi_mem_reserve_iomem() issues a GFP_ATOMIC allocation, which
unfortunately doesn't work under PREEMPT_RT (this ends up grabbing a
non-raw spinlock, which can sleep under PREEMPT_RT). Similarly, freeing the
pages ends up grabbing a sleepable spinlock.
Since the memreserve is only required by kexec, it doesn't have to be done
so early in the secondary boot process. Issue the reservation in a new
CPUHP_AP_ONLINE_DYN cpuhp callback, and piggy-back the page freeing on top
of it. A CPU gets to run the body of this new callback exactly once.
As kexec issues a machine_shutdown() prior to machine_kexec(), it will be
serialized vs a CPU being plugged to life by the hotplug machinery - either
the CPU will have been brought up and have had its redistributor's pending
table memreserved, or it never went online and will have its table
allocated by the new kernel.
[1]: https://lore.kernel.org/lkml/20180921195954.21574-1-marc.zyngier@arm.com/
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211027151506.2085066-3-valentin.schneider@arm.com
|
|
Later patches will require tracking some per-rdist status. Reuse the bytes
"lost" to padding within the __percpu rdist struct as a flags field, and
re-encode ->lpi_enabled within said flags.
No change in functionality intended.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211027151506.2085066-2-valentin.schneider@arm.com
|
|
to pick up the PCI/MSI-x fixes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This was found by coccicheck:
./drivers/irqchip/irq-bcm7120-l2.c,328,1-7,ERROR missing put_device;
call of_find_device_by_node on line 234, but without a corresponding
object release within this function.
./drivers/irqchip/irq-bcm7120-l2.c,341,1-7,ERROR missing put_device;
call of_find_device_by_node on line 234, but without a corresponding
object release within this function.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109055958.130287-1-ye.guojin@zte.com.cn
|
|
There is no point to have this function public as it is set by the PCI core
anyway when a PCI/MSI irqdomain is created.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI
Link: https://lore.kernel.org/r/20211206210224.157070464@linutronix.de
|
|
INVALL CMD specifies that the ITS must ensure any caching associated with
the interrupt collection defined by ICID is consistent with the LPI
configuration tables held in memory for all Redistributors. SYNC is
required to ensure that INVALL is executed.
Currently, LPI configuration data may be inconsistent with that in the
memory within a short period of time after the INVALL command is executed.
Signed-off-by: Wudi Wang <wangwudi@hisilicon.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: cc2d3216f53c ("irqchip: GICv3: ITS command queue")
Link: https://lore.kernel.org/r/20211208015429.5007-1-zhangshaokun@hisilicon.com
|
|
This function is only called from the driver init code.
Signed-off-by: Donghyeok Kim <dthex5d@gmail.com>
Acked-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211204164228.5920-1-dthex5d@gmail.com
|
|
According to ARM(v7M) ARM Interrupt Priority Offsets located at
0xE000E400-0xE000E5EC, while 0xE000E300-0xE000E33C covers read-only
Interrupt Active Bit Registers
Fixes: 292ec080491d ("irqchip: Add support for ARMv7-M NVIC")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211201110259.84857-1-vladimir.murzin@arm.com
|
|
Use the FIELD_GET() helper, instead of open-coding the same operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/74f9d126961a90d3e311b92a54870eaac5b3ae57.1637593297.git.geert+renesas@glider.be
|
|
The interrupt status bits are cleared by writing 1, we should force a
write to clear the interrupt without checking if the value has changed.
Fixes: 04f605906ff0 ("irqchip: Add Aspeed SCU interrupt controller")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211124094348.11621-1-billy_tsai@aspeedtech.com
Cc: stable@vger.kernel.org
|
|
irq-armada-370-xp driver already sets MSI_FLAG_MULTI_PCI_MSI flag into
msi_domain_info structure. But allocated interrupt numbers for Multi-MSI
needs to be properly aligned otherwise devices send MSI interrupt with
wrong number.
Fix this issue by using function bitmap_find_free_region() instead of
bitmap_find_next_zero_area() to allocate aligned interrupt numbers.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: a71b9412c90c ("irqchip/armada-370-xp: Allow allocation of multiple MSIs")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211125130057.26705-2-pali@kernel.org
|
|
IRQ domain alloc function should return zero on success. Non-zero value
indicates failure.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: fcc392d501bd ("irqchip/armada-370-xp: Use the generic MSI infrastructure")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211125130057.26705-1-pali@kernel.org
|
|
When using "devm_request_threaded_irq(,,,,IRQF_ONESHOT,,)" in a driver,
only the first interrupt is handled, and following interrupts are never
delivered (initially reported in [1]).
That's because the RISC-V PLIC cannot EOI masked interrupts, as explained
in the description of Interrupt Completion in the PLIC spec [2]:
<quote>
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the claim/complete
register. The PLIC does not check whether the completion ID is the same
as the last claim ID for that target. If the completion ID does not match
an interrupt source that *is currently enabled* for the target, the
completion is silently ignored.
</quote>
Re-enable the interrupt before completion if it has been masked during
the handling, and remask it afterwards.
[1] http://lists.infradead.org/pipermail/linux-riscv/2021-July/007441.html
[2] https://github.com/riscv/riscv-plic-spec/blob/8bc15a35d07c9edf7b5d23fec9728302595ffc4d/riscv-plic.adoc
Fixes: bb0fed1c60cc ("irqchip/sifive-plic: Switch to fasteoi flow")
Reported-by: Vincent Pelletier <plr.vincent@gmail.com>
Tested-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[maz: amended commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211105094748.3894453-1-guoren@kernel.org
|
|
The mask/unmask must be implemented, and enable/disable supplement
them if the HW requires something different at startup time. When
irq source is disabled by mask, mpintc could complete irq normally.
So drop enable/disable if favour of mask/unmask.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211101134534.3804542-1-guoren@kernel.org
|
|
* irq/irq_cpu_offline:
: .
: Make irq_cpu_{on,off}line() deprecated kernel API, and only
: enable it for some obscure Cavium platform after having
: moved all the other users away from it.
:
: Next step, drop the platform itself.
: .
genirq: Hide irq_cpu_{on,off}line() behind a deprecated option
irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()
MIPS: loongson64: Drop call to irq_cpu_offline()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* irq/remove-handle-domain-irq-20211026:
: Large rework of the architecture entry code from Mark Rutland.
: From the cover letter:
:
: <quote>
: The handle_domain_{irq,nmi}() functions were oringally intended as a
: convenience, but recent rework to entry code across the kernel tree has
: demonstrated that they cause more pain than they're worth and prevent
: architectures from being able to write robust entry code.
:
: This series reworks the irq code to remove them, handling the necessary
: entry work consistently in entry code (be it architectural or generic).
: </quote>
MIPS: irq: Avoid an unused-variable error
irq: remove handle_domain_{irq,nmi}()
irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: riscv: perform irqentry in entry code
irq: openrisc: perform irqentry in entry code
irq: csky: perform irqentry in entry code
irq: arm64: perform irqentry in entry code
irq: arm: perform irqentry in entry code
irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: add generic_handle_arch_irq()
irq: unexport handle_irq_desc()
irq: simplify handle_domain_{irq,nmi}()
irq: mips: simplify do_domain_IRQ()
irq: mips: stop (ab)using handle_domain_irq()
irq: mips: simplify bcm6345_l1_irq_handle()
irq: mips: avoid nested irq_enter()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The MIPS GIC driver uses irq_cpu_online() to go and program the
per-CPU interrupts. However, this method iterates over all IRQs
in the system, despite only 3 per-CPU interrupts being of interest.
Let's be terribly bold and do the iteration ourselves. To ensure
mutual exclusion, hold the gic_lock spinlock that is otherwise
taken while dealing with these interrupts.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20211021170414.3341522-3-maz@kernel.org
|
|
Now that entry code handles IRQ entry (including setting the IRQ regs)
before calling irqchip code, irqchip code can safely call
generic_handle_domain_irq(), and there's no functional reason for it to
call handle_domain_irq().
Let's cement this split of responsibility and remove handle_domain_irq()
entirely, updating irqchip drivers to call generic_handle_domain_irq().
For consistency, handle_domain_nmi() is similarly removed and replaced
with a generic_handle_domain_nmi() function which also does not perform
any entry logic.
Previously handle_domain_{irq,nmi}() had a WARN_ON() which would fire
when they were called in an inappropriate context. So that we can
identify similar issues going forward, similar WARN_ON_ONCE() logic is
added to the generic_handle_*() functions, and comments are updated for
clarity and consistency.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
In preparation for removing HANDLE_DOMAIN_IRQ_IRQENTRY, have arch/arm
perform all the irqentry accounting in its entry code.
For configurations with CONFIG_GENERIC_IRQ_MULTI_HANDLER, we can use
generic_handle_arch_irq(). Other than asm_do_IRQ(), all C calls to
handle_IRQ() are from irqchip handlers which will be called from
generic_handle_arch_irq(), so to avoid double accounting IRQ entry, the
entry logic is moved from handle_IRQ() into asm_do_IRQ().
For ARMv7M the entry assembly is tightly coupled with the NVIC irqchip, and
while the entry code should logically live under arch/arm/, moving the
entry logic there makes things more convoluted. So for now, place the
entry logic in the NVIC irqchip, but separated into a separate
function to make the split of responsibility clear.
For all other configurations without CONFIG_GENERIC_IRQ_MULTI_HANDLER,
IRQ entry is already handled in arch code, and requires no changes.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
In preparation for removing HANDLE_DOMAIN_IRQ, have arch/nds32 perform
all the necessary IRQ entry accounting in its entry code.
Currently arch/nds32 is tightly coupled with the ativic32 irqchip, and
while the entry code should logically live under arch/nds32/, moving the
entry logic there makes things more convoluted. So for now, place the
entry logic in the ativic32 irqchip, but separated into a separate
function to make the split of responsibility clear.
In future this should probably use GENERIC_IRQ_MULTI_HANDLER to cleanly
decouple this.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Chen <deanbo422@gmail.com>
|
|
As bcm6345_l1_irq_handle() only needs to know /whether/ an IRQ was
resolved, and doesn't need to know the specific IRQ, it's simpler for it
to call generic_handle_domain_irq() directly and check the return code,
so let's do that.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
As bcm6345_l1_irq_handle() is a chained irqchip handler, it will be
invoked within the context of the root irqchip handler, which must have
entered IRQ context already.
When bcm6345_l1_irq_handle() calls arch/mips's do_IRQ() , this will nest
another call to irq_enter(), and the resulting nested increment to
`rcu_data.dynticks_nmi_nesting` will cause rcu_is_cpu_rrupt_from_idle()
to fail to identify wakeups from idle, resulting in failure to preempt,
and RCU stalls.
Chained irqchip handlers must invoke IRQ handlers by way of thee core
irqchip code, i.e. generic_handle_irq() or generic_handle_domain_irq()
and should not call do_IRQ(), which is intended only for root irqchip
handlers.
Fix bcm6345_l1_irq_handle() by calling generic_handle_irq() directly.
Fixes: c7c42ec2baa1de7a ("irqchips/bmips: Add bcm6345-l1 interrupt controller")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
* irq/mchp-eic:
: .
: New irqchip driver for the Microchip EIC block
: .
irqchip/mchp-eic: Fix return value check in mchp_eic_init()
irqchip/mchp-eic: Add support for the Microchip EIC
dt-bindings: microchip,eic: Add bindings for the Microchip EIC
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* irq/modular-irqchips:
: .
: Update a set of irqchip drivers to be build as modules.
:
: This includes an Amlogic and multiple Broadcom drivers, triggering
: a cascade of other changes (MIPS arch code, symbols being exported,
: config changes)
: .
irqchip: Fix kernel-doc parameter typo for IRQCHIP_DECLARE
ARM: bcm: Removed forced select of interrupt controllers
arm64: broadcom: Removed forced select of interrupt controllers
irqchip/irq-bcm7120-l2: Switch to IRQCHIP_PLATFORM_DRIVER
genirq: Export irq_gc_noop()
irqchip/irq-brcmstb-l2: Switch to IRQCHIP_PLATFORM_DRIVER
genirq: Export irq_gc_{unmask_enable,mask_disable}_reg
irqchip/irq-bcm7038-l1: Switch to IRQCHIP_PLATFORM_DRIVER
irqchip/irq-bcm7038-l1: Restrict affinity setting to MIPS
irqchip/irq-bcm7038-l1: Gate use of CPU logical map to MIPS
irqchip/irq-bcm7038-l1: Use irq_get_irq_data()
irqchip/irq-bcm7038-l1: Remove .irq_cpu_offline()
MIPS: BMIPS: Remove use of irq_cpu_offline
arm64: meson: remove MESON_IRQ_GPIO selection
irqchip/meson-gpio: Make it possible to build as a module
irqchip: Provide stronger type checking for IRQCHIP_MATCH/IRQCHIP_DECLARE
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In case of error, the function of_iomap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211025050055.1129845-1-yangyingliang@huawei.com
|
|
Allow the user selection and building of this interrupt controller
driver as a module since it is used on ARM/ARM64 based systems as a
second level interrupt controller hanging off the ARM GIC and is
therefore loadable during boot.
To avoid using of_irq_count() which is not exported towards module,
switch the driver to use the platform_device provided by the irqchip
platform driver code and resolve the number of interrupts using
platform_irq_count().
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-11-f.fainelli@gmail.com
|
|
Allow the user selection and building of this interrupt controller
driver as a module since it is used on ARM/ARM64 based systems as a
second level interrupt controller hanging off the ARM GIC and is
therefore loadable during boot.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-9-f.fainelli@gmail.com
|
|
Allow the user selection and building of this interrupt controller
driver as a module since it is used on ARM/ARM64 based systems as a
second level interrupt controller hanging off the ARM GIC and is
therefore loadable during boot.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-7-f.fainelli@gmail.com
|
|
Only MIPS based platforms using this interrupt controller as first level
interrupt controller can actually change the affinity of interrupts by
re-programming the affinity mask of the interrupt controller and use
another word group to have another CPU process the interrupt.
When this interrupt is used as a second level interrupt controller on
ARM/ARM64 there is no way to change the interrupt affinity. This fixes a
NULL pointer de-reference while trying to change the affinity since
there is only a single word group in that case, and we would have been
overruning the intc->cpus[] array.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-6-f.fainelli@gmail.com
|
|
The use of the cpu_logical_map[] array is only relevant for MIPS based
platform where this driver is used as a first level interrupt controller
and contains multiple register groups to map with an associated CPU.
On ARM/ARM64 based systems this interrupt controller is present and used
as a second level interrupt controller hanging off the ARM GIC. That
copy of the interrupt controller contains a single group, resulting in
the intc->cpus[] array to be of size 1.
Things happened to work in that case because we install that interrupt
controller as a chained handler which does not allow it to be affine to
any CPU but the boot CPU which happens to be 0, therefore we never
de-reference past intc->cpus[] but with the current code in place, we do
leave a chance of de-referencing the array past its bounds.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-5-f.fainelli@gmail.com
|
|
Using irq_desc_get_irq_data(irq_to_desc()) to retrieve the irq_data
structure from a virtual interrupt number is going to be problematic to
make irq-bcm7038-l1 a module because irq_to_desc() is not exported, and
there is no intent to export it to modules, see 64a1b95bb9fe ("genirq:
Restrict export of irq_to_desc()").
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-4-f.fainelli@gmail.com
|
|
With arch/mips/kernel/smp-bmips.c having been migrated away from
irq_cpu_offline() and use irq_migrate_all_off_this_cpu() instead, we no
longer need to implement an .irq_cpu_offline() callback. This is a
necessary change to facilitate the building of this driver as a module.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-3-f.fainelli@gmail.com
|
|
Add support for Microchip External Interrupt Controller. The controller
supports 2 external interrupt lines. For every external input there is
a connection to GIC. The interrupt controllers contains only 4
registers:
- EIC_GFCS (read only): which indicates that glitch filter configuration
is ready (not addressed in this implementation)
- EIC_SCFG0R, EIC_SCFG1R (read, write): allows per interrupt specific
settings: enable, polarity/edge settings, glitch filter settings
- EIC_WPMR, EIC_WPSR: enables write protection mode specific settings
(which are architecture specific) for the controller and are not
addressed in this implementation
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210927063657.2157676-3-claudiu.beznea@microchip.com
|
|
In order to reduce the kernel Image size on multi-platform distributions,
make it possible to build the Amlogic GPIO IRQ controller as a module
by switching it to a platform driver.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Saravana Kannan <saravanak@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210902134914.176986-2-narmstrong@baylibre.com
|
|
devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210908105723.1831-1-caihuoqing@baidu.com
|
|
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210908105715.1780-1-caihuoqing@baidu.com
|
