summaryrefslogtreecommitdiff
path: root/drivers/input/joystick
AgeCommit message (Collapse)Author
2009-07-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atkbd - add force relese key quirk for Soltech TA12 Input: fix EVIOCGNAME/JSIOCGNAME regression Input: atkbd - add forced release keys quirk for FSC Amilo Pi 3525 Input: pcspkr - switch driver to dev_pm_ops Input: xpad - don't resend successfully sent outgoing requests Input: wistron_btns - recognize Maxdata Pro 7000 notebooks
2009-07-12Input: xpad - don't resend successfully sent outgoing requestsMichael Gruber
This avoids an infinite loop. Signed-off-by: Michael Gruber <lists.mg@googlemail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-16time: move PIT_TICK_RATE to linux/timex.hArnd Bergmann
PIT_TICK_RATE is currently defined in four architectures, but in three different places. While linux/timex.h is not the perfect place for it, it is still a reasonable replacement for those drivers that traditionally use asm/timex.h to get CLOCK_TICK_RATE and expect it to be the PIT frequency. Note that for Alpha, the actual value changed from 1193182UL to 1193180UL. This is unlikely to make a difference, and probably can only improve accuracy. There was a discussion on the correct value of CLOCK_TICK_RATE a few years ago, after which every existing instance was getting changed to 1193182. According to the specification, it should be 1193181.818181... Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Len Brown <lenb@kernel.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-27sh: maple: Support block reads and writes.Adrian McMenamin
This patch updates the maple bus to support asynchronous block reads and writes as well as generally improving the quality of the code and supporting concurrency (all needed to support the Dreamcast visual memory unit - a driver will also be posted for that). Changes in the bus driver necessitate some changes in the two maple bus input drivers that are currently in mainline. As well as supporting block reads and writes this code clean up removes some poor handling of locks, uses an atomic status variable to serialise access to devices and more robusly handles the general performance problems of the bus. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-30Input: add support for Maple controller as a joystickAdrian McMenamin
Add support for the SEGA Dreamcast Maple controller as a joystick Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-11-19Input: add joystick driver for Walkera WK-0701 RC transmitterPeter Popovec
Signed-off-by: Peter Popovec <popovec@fei.tuke.sk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-10-17USB: remove info() macro from usb input driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove warn() macro from usb input driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove warn() and use the system-wide standard of dev_warn() wherever possible. In the few places that will not work out, use a basic printk(). Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (32 commits) Input: wm97xx - update email address for Liam Girdwood Input: i8042 - add Thinkpad R31 to nomux list Input: move map_to_7segment.h to include/linux Input: ads7846 - fix cache line sharing issue Input: cm109 - add missing newlines to messages Input: document i8042.debug in kernel-parameters.txt Input: keyboard - fix potential out of bound access to key_map Input: psmouse - add OLPC touchpad driver Input: psmouse - tweak PSMOUSE_DEFINE_ATTR to support raw set callbacks Input: psmouse - add psmouse_queue_work() for ps/2 extension to make use of Input: psmouse - export psmouse_set_state for ps/2 extensions to use Input: ads7846 - introduce .gpio_pendown to get pendown state Input: ALPS - add signature for DualPoint found in Dell Latitude E6500 Input: serio_raw - allow attaching to translated (SERIO_I8042XL) ports Input: cm109 - don't use obsolete logging macros Input: atkbd - expand Latitude's force release quirk to other Dells Input: bf54x-keys - add power management support Input: atmel_tsadcc - improve accuracy Input: convert drivers to use strict_strtoul() Input: appletouch - handle geyser 3/4 status bits ...
2008-10-16misc: replace __FUNCTION__ with __func__Harvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-15Merge branch 'next' into for-linusDmitry Torokhov
2008-07-31Input: xpad - add Pelican Eclipse D-Pad to the list of devicesHarley Laue
Signed-off-by: Harley Laue <losinggeneration@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-30Input: gameport - check return value of gameport_register_driver()Dmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-20Input: remove CVS keywordsAdrian Bunk
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-16Input: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-28usb input endianness annotations and fixesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - fix build failure
2008-04-27Input: xpad - fix build failureDmitry Torokhov
If both CONFIG_JOYSTICK_XPAD_FF and CONFIG_JOYSTICK_XPAD_LEDS are unset xpad_bulk_out is not defined and build fails. Move it out of the #ifdef block so it is always defined. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (120 commits) usb: don't update devnum for wusb devices wusb: make ep0_reinit available for modules wusb: devices dont use a set address wusb: teach choose_address() about wireless devices wusb: add link wusb-usb device wusb: add authenticathed bit to usb_dev USB: remove unnecessary type casting of urb->context usb serial: more fixes and groundwork for tty changes USB: replace remaining __FUNCTION__ occurrences USB: usbfs: export the URB_NO_INTERRUPT flag to userspace USB: fix compile problems in ehci-hcd USB: ehci: qh_completions cleanup and bugfix USB: cdc-acm: signedness fix USB: add documentation about callbacks USB: don't explicitly reenable root-hub status interrupts USB: OHCI: turn off RD when remote wakeup is disabled USB: HCDs use the do_remote_wakeup flag USB: g_file_storage: ignore bulk-out data after invalid CBW USB: serial: remove endpoints setting checks from core and header USB: serial: remove unneeded number endpoints settings ...
2008-04-24USB: convert away from urb->status in xpad driverOliver Neukum
USB is moving to transfering status as a parameter. To ease the transition urb->status is to be touched only once in a function. The xpad driver has been overlooked. Dmitry wants this to go through the USB tree. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24Input: fix ordering in joystick MakefileJiri Kosina
Make entries in drivers/input/joystick/Makefile properly alphabetically ordered. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-15Input: add Zhen Hua driverMartin Kebert
This is a driver for Zhen Hua PPM-4CH RC transmitter (commonly used in cheap Ready To Fly RC helicopters by Walkera) which using "Zhen Hua 5-byte protocol" for using them as a four axis joystick via serial port. Transmitter connected to serial port (19200 8N1) sending periodically 5 bytes where first byte is for synchronization and next four bytes are values of axis. Signed-off-by: Martin Kebert <gkmarty@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-15Input: xpad - set proper buffer length for outgoing requestsMichael Gruber
The messages for led/rumble are exactly 3 and 8 bytes respectively. Hence set up the transfer_buffer_length accordingly. Signed-off-by: Michael Gruber <lists.mg@googlemail.com> Acked-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-03Input: xpad - don't use GFP_ATOMICOliver Neukum
GFP_ATOMIC should not be used when GFP_KERNEL can be used. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-03Input: xpad - add support for wireless xbox360 controllersBrian Magnuson
Signed-off-by: Brian Magnuson <bdmagnuson@gmail.com> Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-03Input: xpad - drop obsolete driver versioningAnssi Hannula
The driver version numbers and changelog have not been updated in a long while to reflect actual changes. Remove the version number and add a notice that later changes can be tracked in SCM. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-03Input: xpad - enable force feedback on xbox 360 controllers onlyAnssi Hannula
Commit 4994cd8dadcf9d484ab3ec19f3c7c7a4e5353c1c introduced a regression which causes xpad to report force feedback cababilities for non-360 controllers too, even while there is no actual support for those. Fix that by adding a check for XTYPE_XBOX360 to xpad_init_ff(). Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-03Input: xpad - do not report nonexistent buttons for xbox360Anssi Hannula
The buttons BTN_C and BTN_Z are only used in the original xbox controller, not in xbox360 controller. Therefore only add them to keybit when the controller is a non-360 one. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-03Input: xpad - add more xbox 360 controller idsAnssi Hannula
Add Mad Catz and 0x0e6f xbox360 controllers which are already found in xpad_device[] table in xpad.c into the vendor id list. Also add Logitech into the vendor list for Logitech Chillstream gamepads. Also add the RedOctane Guitar Hero X-plorer. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-03Input: xpad - fix inverted Y and RY axesAnssi Hannula
The commit ae91d10aab2762f81733e9194cb56eff99c8d808 inverted Y and RY axes on xbox360 so that up is positive and down is negative. This is wrong, as axes on game controllers have up as negative per convention. Also, even xpad itself reports HAT0X with up as negative. Fix that by inverting them again. Also, according to http://bugzilla.kernel.org/show_bug.cgi?id=10337 the original xbox controllers also have the Y and RY axes inverted. Fix that by inverting them as well. Cc: Brian Magnuson <bdmagnuson@gmail.com> Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-03Input: xpad - fix dpad handling of unknown devicesAnssi Hannula
For devices not specifically listed in xpad.c, xpad->dpad_mapping is initially set to MAP_DPAD_UNKNOWN. In xpad_probe() it gets changed to either MAP_DPAD_TO_BUTTONS or MAP_DPAD_TO_AXES, depending on the module parameter dpad_to_buttons. However, MAP_DPAD_UNKNOWN is defined as -1, while the field is u8. This results in actual value of 255, causing the MAP_DPAD_UNKNOWN check in xpad_probe() to fail. Fix that by defining MAP_DPAD_UNKNOWN as 2 instead. Also, setting module parameter dpad_to_buttons to 1 should obviously map dpad to buttons, while the default behaviour (0) should be to map dpad to axes. However, dpad_to_buttons is directly assigned to xpad->dpad_mapping, and as MAP_DPAD_TO_BUTTONS is 0, the actual behaviour is reversed. Fix that by negating dpad_to_buttons in assignment. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-03Input: xpad - match xbox 360 devices with interface infoAnssi Hannula
Match Xbox 360 controllers using the interface info, i.e. interface class 255 (Vendor specific), subclass 93 and protocol 1, instead of specifying the device ids individually. As the class is vendor-specific, we have to still match against vendor id as well, though. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-02-08mn10300: add the MN10300/AM33 architecture to the kernelDavid Howells
Add architecture support for the MN10300/AM33 CPUs produced by MEI to the kernel. This patch also adds board support for the ASB2303 with the ASB2308 daughter board, and the ASB2305. The only processor supported is the MN103E010, which is an AM33v2 core plus on-chip devices. [akpm@linux-foundation.org: nuke cvs control strings] Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com> Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-21Input: drop redundant includes of moduleparam.hJulia Lawall
Drop #include <linux/moduleparam.h> in files that also include linux/module.h, since module.h includes moduleparam.h already. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: iforce - don't access input_dev->private directlyDmitry Torokhov
input_{get|set}_drvdata() helpers should be used instead. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-27Input: xpad - add more USB IDsJoshua J Bowman
Add USB IDs of Mad Catz Wired Xbox 360 Controller and Pelican 'TSZ' Wired Xbox 360 Controller. Signed-off-by: Joshua J Bowman <bowmanj@augsburg.edu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-20changed emailJohann Deneux
Changed email address of Johann Deneux (myself) Also removed CVS tags in comments (no longer using cvs) Signed-off-by: Johann Deneux <johann.deneux@gmail.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Convert files to UTF-8 and some cleanupsJan Engelhardt
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19get rid of input BIT* duplicate definesJiri Slaby
get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <dtor@mail.ru> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6Dmitry Torokhov
Conflicts: drivers/macintosh/adbhid.c
2007-09-28Input: xpad - fix dependancy on LEDS classDmitry Torokhov
Input: xpad - fix dependancy on LEDS class The driver can not be built-in when LEDS class is a module. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-26Input: xpad - fix dependancy on LEDS classDmitry Torokhov
The driver can not be built-in when LEDS class is a module. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-08-30Input: iforce - fix 'unused variable' warningAndrew Morton
drivers/input/joystick/iforce/iforce-packets.c: In function `iforce_get_id_packet': drivers/input/joystick/iforce/iforce-packets.c:249: warning: unused variable `status' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-18Input: xpad - use le16_to_cpup when parsing data streamDmitry Torokhov
Use avaliable functions instead of doing it all manually. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-18Input: xpad - add support for leds on xbox 360 padJan Kratochvil
Export LEDs on Xbox360 pad via led subsystem as a single device in /sys/class/leds/xpad[0-9]+. Xbox360 pad has four leds, which form a circle. Unfortunately the leds can't be controlled independently and can only display a predefined set of patterns (for example one is turned on wile others are off or a rotating pattern - 1-2-3-4). To activate a pattern one needs to send a specific command to the device (see http://www.free60.org/wiki/Gamepad). Led subsystem allows us to set brightness, but there is nothing like brightness on this device. So brightness is actually interpreted as the command (only values between 0 and 14 are accepted). Signed-off-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - fix report for dpad and inverted Y and RY axes on xbox 360Dmitry Torokhov
Make the driver report Y/RY up as positive value and down as negative. Also make DPAD mapping the same as classic xpad. Reported-by: Brian Magnuson <bdmagnuson@gmail.com> Tested-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - make xpad_play_effect() staticAdrian Bunk
xpad_play_effect() does not need to be global. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - fix check for succesful usb_buffer_allocJan Kratochvil
Signed-off-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: grip-mp - use ARRAY_SIZEAndi Drebes
Signed-off-by: Andi Drebes <lists-receive@programmierforen.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - add Xbox360 gamepad rumble supportJan Kratochvil
Implementation is using force feedback support for memoryless devices. Signed-off-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-26 01:37:13 +0000