summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/mthca/mthca_eq.c
AgeCommit message (Collapse)Author
2021-08-23RDMA: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Link: https://lore.kernel.org/r/259e53b7a00f64bf081d41da8761b171b2ad8f5c.1629634798.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2019-03-25RDMA: Use __packed annotation instead of __attribute__ ((packed))Erez Alfasi
"__attribute__" set of macros has been standardized, have became more potentially portable and consistent code back in v2.6.21 by commit 82ddcb040 ("[PATCH] extend the set of "__attribute__" shortcut macros"). Moreover, nowadays checkpatch.pl warns about using __attribute__((packed)) instead of __packed. This patch converts all the "__attribute__ ((packed))" annotations to "__packed" within the RDMA subsystem. Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2013-10-14IB: Remove unnecessary semicolonsJoe Perches
These aren't necessary after switch blocks. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-15IB/mthca: Stop returning separate error and status from FW commandsGoldwyn Rodrigues
Instead of having firmware command functions return an error and also a status, leading to code like: err = mthca_FW_COMMAND(..., &status); if (err) goto out; if (status) { err = -E...; goto out; } all over the place, just handle the FW status inside the FW command handling code (the way mlx4 does it), so we can simply write: err = mthca_FW_COMMAND(...); if (err) goto out; In addition to simplifying the source code, this also saves a healthy chunk of text: add/remove: 0/0 grow/shrink: 10/88 up/down: 510/-3357 (-2847) function old new delta static.trans_table 324 584 +260 mthca_cmd_poll 352 477 +125 mthca_cmd_wait 511 567 +56 mthca_table_put 213 240 +27 mthca_cleanup_db_tab 372 387 +15 __mthca_remove_one 314 323 +9 mthca_cleanup_user_db_tab 275 283 +8 __mthca_init_one 1738 1746 +8 mthca_cleanup 20 21 +1 mthca_MAD_IFC 1081 1082 +1 mthca_MGID_HASH 43 40 -3 mthca_MAP_ICM_AUX 23 20 -3 mthca_MAP_ICM 19 16 -3 mthca_MAP_FA 23 20 -3 mthca_READ_MGM 43 38 -5 mthca_QUERY_SRQ 43 38 -5 mthca_QUERY_QP 59 54 -5 mthca_HW2SW_SRQ 43 38 -5 mthca_HW2SW_MPT 60 55 -5 mthca_HW2SW_EQ 43 38 -5 mthca_HW2SW_CQ 43 38 -5 mthca_free_icm_table 120 114 -6 mthca_query_srq 214 206 -8 mthca_free_qp 662 654 -8 mthca_cmd 38 28 -10 mthca_alloc_db 1321 1311 -10 mthca_setup_hca 1067 1055 -12 mthca_WRITE_MTT 35 22 -13 mthca_WRITE_MGM 40 27 -13 mthca_UNMAP_ICM_AUX 36 23 -13 mthca_UNMAP_FA 36 23 -13 mthca_SYS_DIS 36 23 -13 mthca_SYNC_TPT 36 23 -13 mthca_SW2HW_SRQ 35 22 -13 mthca_SW2HW_MPT 35 22 -13 mthca_SW2HW_EQ 35 22 -13 mthca_SW2HW_CQ 35 22 -13 mthca_RUN_FW 36 23 -13 mthca_DISABLE_LAM 36 23 -13 mthca_CLOSE_IB 36 23 -13 mthca_CLOSE_HCA 38 25 -13 mthca_ARM_SRQ 39 26 -13 mthca_free_icms 178 164 -14 mthca_QUERY_DDR 389 375 -14 mthca_resize_cq 1063 1048 -15 mthca_unmap_eq_icm 123 107 -16 mthca_map_eq_icm 396 380 -16 mthca_cmd_box 90 74 -16 mthca_SET_IB 433 417 -16 mthca_RESIZE_CQ 369 353 -16 mthca_MAP_ICM_page 240 224 -16 mthca_MAP_EQ 183 167 -16 mthca_INIT_IB 473 457 -16 mthca_INIT_HCA 745 729 -16 mthca_map_user_db 816 798 -18 mthca_SYS_EN 157 139 -18 mthca_cleanup_qp_table 78 59 -19 mthca_cleanup_eq_table 168 149 -19 mthca_UNMAP_ICM 143 121 -22 mthca_modify_srq 172 149 -23 mthca_unmap_fmr 198 174 -24 mthca_query_qp 814 790 -24 mthca_query_pkey 343 319 -24 mthca_SET_ICM_SIZE 34 10 -24 mthca_QUERY_DEV_LIM 1870 1846 -24 mthca_map_cmd 1130 1105 -25 mthca_ENABLE_LAM 401 375 -26 mthca_modify_port 247 220 -27 mthca_query_device 884 850 -34 mthca_NOP 75 41 -34 mthca_table_get 287 249 -38 mthca_init_qp_table 333 293 -40 mthca_MODIFY_QP 348 308 -40 mthca_close_hca 131 89 -42 mthca_free_eq 435 390 -45 mthca_query_port 755 705 -50 mthca_free_cq 581 528 -53 mthca_alloc_icm_table 578 524 -54 mthca_multicast_attach 1041 986 -55 mthca_init_hca 326 271 -55 mthca_query_gid 487 431 -56 mthca_free_srq 524 468 -56 mthca_free_mr 168 111 -57 mthca_create_eq 1560 1501 -59 mthca_multicast_detach 790 728 -62 mthca_write_mtt 918 854 -64 mthca_register_device 1406 1342 -64 mthca_fmr_alloc 947 883 -64 mthca_mr_alloc 652 582 -70 mthca_process_mad 1242 1164 -78 mthca_dev_lim 910 830 -80 find_mgm 482 400 -82 mthca_modify_qp 3852 3753 -99 mthca_init_cq 1281 1181 -100 mthca_alloc_srq 1719 1610 -109 mthca_init_eq_table 1807 1679 -128 mthca_init_tavor 761 491 -270 mthca_init_arbel 2617 2098 -519 Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
2011-01-11IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long)John L. Burr
Some systems have PCI addresses that don't fit in unsigned long (eg some 32-bit PowerPC 440 systems have 36-bit bus addresses). Fix up the driver by using phys_addr_t where appropriate, so we don't truncate any PCI resource addresses before ioremapping them. Signed-off-by: John L. Burr <jlburr@cadence.com> [ Update to apply to current driver source. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-21IB/mthca: Use the dma state API instead of pci equivalentsFUJITA Tomonori
The DMA API is preferred; no functional change. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-09-05IB/mthca: Distinguish multiple devices in /proc/interruptsArputham Benjamin
When the mthca driver uses the same name for interrupts for every device in the system. This can make it very confusing trying to work out exactly which device MSI-X interrupts are for. Change the driver to add the PCI name of the device to the interrupt name. Signed-off-by: Arputham Benjamin <abenjamin@sgi.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-06-13IB/mthca: Don't double-free IRQs when falling back from MSI-X to INTxRoland Dreier
When both MSI-X and legacy INTx fail to generate an interrupt, the driver frees the MSI-X interrupts twice. Fix this by clearing the have_irq flag for the MSI-X interrupts when they are freed the first time. Reported-by: Yinghai Lu <yhlu.kernel@gmail.com> Tested-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-29IB/mthca: Use pci_request_regions()Roland Dreier
Back in prehistoric (pre-git!) days, the kernel's MSI-X support did request_mem_region() on a device's MSI-X tables, which meant that a driver that enabled MSI-X couldn't use pci_request_regions() (since that would clash with the PCI layer's MSI-X request). However, that was removed (by me!) years ago, so mthca can just use pci_request_regions() and pci_release_regions() instead of its own much more complicated code that avoids requesting the MSI-X tables. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-26dma-mapping: add the device argument to dma_mapping_error()FUJITA Tomonori
Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-14RDMA: Remove subversion $Id tagsRoland Dreier
They don't get updated by git and so they're worse than useless. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/mthca: Formatting cleanupsRoland Dreier
Fix a few whitespace and other coding style problems. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25IB/mthca: Remove MSI support as scheduledAdrian Bunk
Remove MSI support from the mthca driver, as scheduled. There is no reason to use MSI instead of MSI-X, since MSI-X performs better. No one has spoken up since MSI support was deprecated in commit f6be6fbe ("IB/mthca: Schedule MSI support for removal"), so apparently the MSI support is unused. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-15IB/mthca: Avoid alignment traps when writing doorbellsRoland Dreier
Architectures such as ia64 see alignment traps when doing a 64-bit read from __be32 doorbell[2] arrays to do doorbell writes in mthca_write64(). Fix this by just passing the two halves of the doorbell value into mthca_write64(). This actually improves the generated code by allowing the compiler to see what's going on better. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-10IB/mthca: Replace memset(<addr>, 0, PAGE_SIZE) with clear_page(<addr>)Shani Moideen
Signed-off-by: Shani Moideen <shani.moideen@wipro.com> Signed-off-by: Roland Dreier <rolandd@cisco.com> ----
2006-11-29IB/mthca: Fix section mismatchesRoland Dreier
Commit b3b30f5e ("IB/mthca: Recover from catastrophic errors") introduced some section mismatch breakage, because the error recovery code tears down and reinitializes the device, which calls into lots of code originally marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Reported by Randy Dunlap <randy.dunlap@oracle.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-07-02[PATCH] irq-flags: misc drivers: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-17IB/mthca: Remove dead codeMichael S. Tsirkin
Kill some dead code in mthca_eq.c Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-29IB/mthca: Fix section mismatch problemsRoland Dreier
Quite a few cleanup functions in mthca were marked as __devexit. However, they could also be called from error paths during initialization, so they cannot be marked that way. Just delete all of the incorrect annotations. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Coverity fix to mthca_init_eq_table()Roland Dreier
Fix bug found by coverity: the loop body never executed, because it was doing for (i = 0; i < MTHCA_EQ_CMD; ++i), but MTHCA_EQ_CMD is 0. The correct loop bound is MTHCA_NUM_EQ, to loop over all EQs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Use an enum for HCA page sizeIshai Rabinovitz
Use a named enum for the HCA's internal page size, rather than having magic values of 4096 and shifts by 12 all over the code. Also, fix one minor bug in EQ handling: only one HCA page is mapped to the HCA during initialization, but a full kernel page is unmapped during cleanup. This might cause problems when PAGE_SIZE != 4096. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Whitespace cleanupsRoland Dreier
Remove trailing whitespace and fix indentation that with spaces instead of tabs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-09IB/mthca: prevent event queue overrunMichael S. Tsirkin
I am seeing EQ overruns in SDP stress tests: if the CQ completion handler arms a CQ, this could generate more EQEs, so that EQ will never get empty and consumer index will never get updated. This is similiar to what we have with command interface: /* * cmd_event() may add more commands. * The card will think the queue has overflowed if * we don't tell it we've been processing events. */ However, for completion events, we *don't* want to update the consumer index on each event. So, perform EQ doorbell coalescing: allocate EQs with some spare EQEs, and update once we run out of them. The value 0x80 was selected to avoid any performance impact. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-05IB/mthca: create_eq with size not a power of 2Michael S. Tsirkin
Fix mthca_create_eq for when the EQ size is not a power of 2. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-29[IB] mthca: report asynchronous CQ eventsMichael S. Tsirkin
Implement reporting asynchronous CQ events in Mellanox HCA driver. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-24Manual merge of for-linus to upstream (fix conflicts in ↵Roland Dreier
drivers/infiniband/core/ucm.c)
2005-10-22[IB] mthca: Always re-arm EQs in mthca_tavor_interrupt()Roland Dreier
We should always re-arm an event queue's interrupt in mthca_tavor_interrupt() if the corresponding bit is set in the event cause register (ECR), even if we didn't find any entries in the EQ. If we don't, then there's a window where we miss an EQ entry and then get stuck because we don't get another EQ event. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] mthca: SRQ limit reached eventsRoland Dreier
Our hardware supports generating an event when the number of receives posted to a shared receive queue (SRQ) falls below a user-specified limit. Implement mthca_modify_srq() to arm the limit, and add code to handle dispatching SRQ events when they occur. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-26[IB] mthca: fix off by one in clr_int calculationMichael S. Tsirkin
We should use the first word of the clear interrupt register if the bit we're after is < 32, not < 31. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-18[PATCH] IB/mthca: Initialize eq->nent before we use itRoland Dreier
In mthca_create_eq(), we call get_eqe() before setting eq->nent. This is wrong, because get_eqe() uses eq->nent. Fix this, and clean up the code a little while we're at it. (We got lucky with the current code, because eq->nent was cleared to 0, which get_eqe() made happen to do the right thing) Pointed out by Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26[PATCH] IB: sparse endianness cleanupSean Hefty
Fix sparse warnings. Use __be* where appropriate. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26[PATCH] IB: Add copyright noticesRoland Dreier
Make some lawyers happy and add copyright notices for people who forgot to include them when they actually touched the code. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-06-27[PATCH] IB/mthca: Align FW command mailboxes to 4KRoland Dreier
Future versions of Mellanox HCA firmware will require command mailboxes to be aligned to 4K. Support this by using a pci_pool to allocate all mailboxes. This has the added benefit of shrinking the source and text of mthca. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27[PATCH] IB/mthca: Use dma_alloc_coherent instead of pci_alloc_consistentRoland Dreier
Switch all allocations of coherent memory from pci_alloc_consistent() to dma_alloc_coherent(), so that we can pass GFP_KERNEL. This should help when the system is low on memory. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27[PATCH] IB/mthca: Clean up error messagesBernhard Fischer
- Fix incorrect cut-n-paste in error messages. - Add missing newlines in error messages. - Use DRV_NAME instead of "ib_mthca" in a couple of places. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16[PATCH] IB/mthca: encapsulate mem-free check into mthca_is_memfree()Roland Dreier
Clean up mem-free mode support by introducing mthca_is_memfree() function, which encapsulates the logic of deciding if a device is mem-free. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16[PATCH] IB/mthca: fix format of CQ number for CQ eventsRoland Dreier
CQ numbers are only 24 bits, so only print 6 hex digits and mask off reserved part when reporting a CQ event. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-28 08:04:16 +0000