summaryrefslogtreecommitdiff
path: root/drivers/iio/chemical
AgeCommit message (Collapse)Author
2021-10-21iio: chemical: scd4x: Add a scale for the co2 concentration readingRoan van Dijk
This patch adds a scale for the co2 concentration reading. The reading is expressed in percent after applying the scale to the raw value. Signed-off-by: Roan van Dijk <roan@protonic.nl> Link: https://lore.kernel.org/r/20211021140018.3051213-1-roan@protonic.nl Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-19drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensorRoan van Dijk
This is a driver for the SCD4x CO2 sensor from Sensirion. The sensor is able to measure CO2 concentration, temperature and relative humdity. The sensor uses a photoacoustic principle for measuring CO2 concentration. An I2C interface is supported by this driver in order to communicate with the sensor. Signed-off-by: Roan van Dijk <roan@protonic.nl> Link: https://lore.kernel.org/r/20211008101706.755942-4-roan@protonic.nl Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-19iio: chemical: SENSEAIR_SUNRISE_CO2 depends on I2CRandy Dunlap
Fix kconfig symbol dependency warning: WARNING: unmet direct dependencies detected for REGMAP_I2C Depends on [n]: I2C [=n] Selected by [y]: - SENSEAIR_SUNRISE_CO2 [=y] && IIO [=y] Fixes: c397894e24f1 ("iio: chemical: Add Senseair Sunrise 006-0-007 drive") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: linux-iio@vger.kernel.org Link: https://lore.kernel.org/r/20211002232803.5108-1-rdunlap@infradead.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-19iio: chemical: Add Senseair Sunrise 006-0-007 driverJacopo Mondi
Add support for the Senseair Sunrise 006-0-0007 driver through the IIO subsystem. Datasheet: https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/TDE5531.pdf Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Link: https://lore.kernel.org/r/20210920135413.140310-4-jacopo+renesas@jmondi.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-08iio: chemical: Add driver support for sgp40Andreas Klinger
sgp40 is a gas sensor used for measuring the air quality. This driver is reading the raw resistance value which can be passed to an userspace algorithm for further calculation. The raw value is also used to calculate an estimated absolute voc index in the range from 0 to 500. For this purpose the raw_mean value of the resistance for which the index value is 250 might be set up as a calibration step. This can be done with in_resistance_calibbias. Compensation of relative humidity and temperature is supported and can be used by writing to output values of out_humidityrelative_raw and out_temp_raw. There is a predecesor sensor type (sgp30) already existing. This driver module was not extended because the new sensor is quite different in its i2c telegrams. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210804154641.GA3237@arbad Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-16iio: chemical: atlas-sensor: Balance runtime pm + pm_runtime_resume_and_get()Jonathan Cameron
The pm_runtime_put_noidle() call in remove isn't balanced with any get, so drop it. Note this isn't a bug as the runtime pm core will not allow the reference count to go negative, making this a noop. However, it is confusing to the reader so let's drop it. pm_runtime_resume_and_get() replacement found using the coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/ As pm_runtime_resume_and_get() returns <= 0 take advantage of that to change the error checking to if (ret) which is more in keeping with the rest of this driver. This is a prequel to taking a closer look at the runtime pm in IIO drivers in general. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Matt Ranostay <matt.ranostay@konsulko.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/20210516162103.1332291-4-jic23@kernel.org
2021-06-03iio: chemical: sgp30: Drop use of %hx in format string.Jonathan Cameron
Since: commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]") use of these format strings has been discouraged. As there are only a few such uses in IIO, lets clear them all out and avoid chance of them getting copied into new drivers. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Andreas Brauchli <andreas.brauchli@sensirion.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20210517125554.1463156-5-jic23@kernel.org
2021-05-17iio: chemical: atlas: Fix buffer alignment in ↵Jonathan Cameron
iio_push_to_buffers_with_timestamp() Variable location for the timestamp, so just use __aligned(8) to ensure it is always possible to naturally align it. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes tag is not accurate, but it will need manual backporting beyond that point if anyone cares. Fixes: 0d15190f53b4 ("iio: chemical: atlas-ph-sensor: rename atlas-ph-sensor to atlas-sensor") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Matt Ranostay <matt.ranostay@konsulko.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20210501171352.512953-6-jic23@kernel.org
2021-05-17iio: bme680_i2c: Remove acpi_device_id tableGuenter Roeck
With CONFIG_ACPI=n and -Werror, 0-day reports: drivers/iio/chemical/bme680_i2c.c:46:36: error: 'bme680_acpi_match' defined but not used Apparently BME0680 is not a valid ACPI ID. Remove the ID. Note the driver will still work with ACPI bindings that use the PRP0001 mechanism as that uses the of_device_id table instead. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17iio: bme680_spi: Remove acpi_device_id tableGuenter Roeck
BME0680 is not an official ACPI ID, so let's remove it before someone starts using it. Note that ACPI can still be used with this driver via the PRP0001 method which will use the of_device_id table to match. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17iio: core: move @id from struct iio_dev to struct iio_dev_opaqueJonathan Cameron
Continuing from Alexandru Ardelean's introduction of the split between driver modifiable fields and those that should only be set by the core. This could have been done in two steps to make the actual move after introducing iio_device_id() but there seemed limited point to that given how mechanical the majority of the patch is. Includes fixup from Alex for missing mxs-lradc-adc conversion. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20210426174911.397061-2-jic23@kernel.org
2021-05-17iio: sps30: add support for serial interfaceTomasz Duszynski
Sensor has support for both i2c and serial communication interfaces. Both offer very similar set of features. Minor differences don't impact overall functionality like doing measurements, etc. Support for i2c have already been added, this patch adds support for the latter ie. serial interface. Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17iio: sps30: separate core and interface specific codeTomasz Duszynski
Move code responsible for handling i2c communication to a separate file. Rationale for this change is preparation for adding support for serial communication. Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17iio:chemical:sps30: Convert sysfs sprintf/snprintf family to sysfs_emitTian Tao
Fix the following coccicheck warning: ./drivers/iio/chemical/sps30.c:414:8-16: WARNING: use scnprintf or sprintf Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1618216751-1678-2-git-send-email-tiantao6@hisilicon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio:chemical:scd30: Use IRQF_NO_AUTOEN to avoid irq request then disableJonathan Cameron
This new flag cleanly avoids the need for a dance where we request the interrupt only to immediately disabling it by ensuring it is not auto-enabled in the first place. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Tomasz Duszynski <tomasz.duszynski@octakon.com> Reviewed-by: Barry Song <song.bao.hua@hisilicon.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210402184544.488862-6-jic23@kernel.org
2021-03-25iio: chemical: atlas: Remove code to set trigger parentGwendal Grignou
iio_trigger_set_drvdata() sets the trigger device parent to first argument of viio_trigger_alloc(), no need to do it again in the driver code. Given we call devm_iio_trigger_alloc() and devm_iio_device_alloc() with &client->dev as parent, we do not have to set data->trig->dev.parent to indio_dev->dev.parent anymore. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20210309193620.2176163-7-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-25iio: fix devm_iio_trigger_alloc with parent.cocciGwendal Grignou
Use cocci semantic patch: @@ expression trigger, P; @@ trigger = devm_iio_trigger_alloc(P, ...); ... - trigger->dev.parent = P; To remove trigger->dev.parent, since it is set by default. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210309193620.2176163-3-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-25iio: chemical: bmp680: Drop unneeded explicit castingsAndy Shevchenko
In few places the unnecessary explicit castings are being used. Drop them for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210312134349.3472-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11iio: use getter/setter functionsJulia Lawall
Use getter and setter functions, for a variety of data types. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20210209211315.1261791-1-Julia.Lawall@inria.fr Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-09iio: bme680: Use DIV_ROUND_CLOSEST() instead of open-coding itLars-Peter Clausen
Use DIV_ROUND_CLOSEST() instead of open-coding it. This documents intent and makes it more clear what is going on for the casual reviewer. Generated using the following the Coccinelle semantic patch. // <smpl> @r1@ expression x; constant C1; constant C2; @@ ((x) + C1) / C2 @script:python@ C1 << r1.C1; C2 << r1.C2; @@ try: if int(C1) * 2 != int(C2): cocci.include_match(False) except: cocci.include_match(False) @@ expression r1.x; constant r1.C1; constant r1.C2; @@ -(((x) + C1) / C2) +DIV_ROUND_CLOSEST(x, C2) // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20201227171126.28216-2-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-09iio: chemical: pms7003: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211085700.3037-1-zhengyongjun3@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-22Merge tag 'iio-for-5.10b-take2' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of features and cleanups for IIO in 5.10 We have a couple of changes that apply to large sets of drivers, so I have grouped those to keep this short. There are a few late breaking fixes in here that can wait for the merge window. dt yaml conversions ------------------- * adi,ad7768-1 * adi,ad7949 * aspeed,ast2400 * cosmic,10001-adc * dlg,da9150-gpadc * fsl,imx25-gcq * fsl,imx7d-adc * fsl,vf610 * holt,hi8435 * marvell,berlin2-adc * motorola,cpcap-adc * nuvoton,nau7802 * nuvoton,npcm750-adc * nxp,lpc1850-adc * nxp,lpc3220 * sprd,sc2720-adc * st,stmpe-adc * ti,adc12138 * ti,ads1015 * ti,ads7950 * ti,twl4030-madc Features -------- * adxrs290 - Add triggered buffer support and expose data ready signal as a possible trigger. Includes updating bindings. - Add debugfs hooks for register access. * mlx90632 - Add a clear user interface to override the measured ambient temperature. * vl53l0x - Add IRQ support including dt bindings. Cleanups and minor fixes ------------------------ (groups) Replace mlock with local lock: * adf4350 * exynos-adc * fls-imx25-gcq * stm32-dac devm use to simplify probe error handling and remove functions. * adis16201 * adis16203 * adis16209 * adis16240 * adis16136 * adis16260 * adis16400 * adis16460 * adis16480 * adis library - drop unused adis_setup_buffer_and_trigger() of_match_ptr removal and incorrect ACPI binding removal of_match_ptr() rarely makes sense in an IIO driver as space saving is trivial and it breaks ACPI PRP0001 based instantiation. Mostly this series is about removing examples that get copied into new drivers. * ad2s1200 * ad5272 * ad5446 * ad5592r * ad5593r * ad5703 * ak8974 * ak8975 * ams-iaq-core * as3935 * atlas-sensor * ds1803 * hdc100x * htu21 * icp10100 * lmp91000 * pulsedlight * max30102 * max5432 * max5481 * mcp4018 * mcp4131 * mcp4531 * mcp4725 * ms5611 * ms5637 * si7020 * sgp30 * ti-dac082s085 * ti-dac5571 * tmp007 * tsys01 * vz89x * zpa2326 kernel-doc fixes * iio-core * ad7303 * ad7947 * adis16080 * adis16400 * iio_dummy_evgen * sgp30 Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp() This is a long running effort. There are a few more drivers to come. * inv_mpu6050 * itg3200 * si1145 * st_lsm6dsx * ti-adc0832 * ti-adc12138 (not driver focused) * MAINTAINERS - Consolidate Analog Device IIO entries whilst removing Beniamin Bia. - Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been active for a long time and people are getting intermitted bounces. * Add __printf() markings to a few functions that were missing them. * drop some rotted documentation from staging. * rework buffer sysfs file creation (precursor to multiple buffer support) (individual drivers) * ad5592r - Fix use of true for IIO_SHARED_BY_TYPE - Tidy up locking and indentation. * ad9467 - Improve error message on chip-id missmatch. - Use more appropriate error value if chip-id not recognised. * adis-library - Simplify burst mode handling. * adxrs290 - Make sure to switch device to standby mode during remove. * as73211 - Increase measurement timeout as seems some devices are slower. * bma180 - Fix use of true fo IIO_SHARED_BY_TYPE * exynos_adc - Update binding to require second interrut with touch screen. - Update binding to not require syscon on S5Pv210 * hmc5843 - Fix use of true for IIO_SHARED_BY_TYPE * inv_mpu6050 - Use regmap_noinc_read() for fifo reading. * palmas_gpadc - Use module_platform_driver() to remove boilerplate. * meson-saradc - style consistency fixes * rockchip_saradc - Allow compile testing with !ARM. * st_lsm6dsx - Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision. - Fix an issue with unchecked return value. * stm32-adc - Fix a missing return introduced in dev_err_probe() patch earlier in cycle. * sx9310 - Prefer async mode for probe as paticularly slow startup. * vcnl4000 - Add missing interrupt property to dt binding. * tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits) dt-bindings: iio: vishay,vcnl4000: add interrupts property iio:imu:inv_mpu6050: Use regmap_noinc_read for fifo reads. iio:imu:inv_mpu6050 Fix dma and ts alignment and data leak issues. iio:adc:ti-adc12138 Fix alignment issue with timestamp iio:adc:ti-adc0832 Fix alignment issue with timestamp iio:imu:st_lsm6dsx Fix alignment and data leak issues iio:light:si1145: Fix timestamp alignment and prevent data leak. iio:gyro:itg3200: Fix timestamp alignment and prevent data leak. iio:imu:st_lsm6dsx: check st_lsm6dsx_shub_read_output return iio: adc: exynos_adc: Replace indio_dev->mlock with own device lock dt-bindings:iio:adc:holt,hi8435 yaml conversion dt-bindings:iio:adc:adi,ad7768-1 yaml conversion dt-bindings:iio:adc:adi,ad7949 yaml conversion dt-bindings:iio:adc:dlg,da9150-gpadc yaml conversion dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion dt-bindings:iio:adc:nxp,lpc3220-adc yaml conversion dt-bindings:iio:adc:nxp,lpc1850-adc yaml conversion dt-bindings:iio:adc:fsl,imx25-gcq yaml conversion dt-bindings:iio:adc:fsl,imx7d-adc yaml conversion dt-bindings:iio:adc:ti,ads1015 yaml conversion ...
2020-09-21iio: chemical: sgp30: Add description for sgp_read_cmd()'s 'duration_us'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/iio/chemical/sgp30.c:236: warning: Function parameter or member 'duration_us' not described in 'sgp_read_cmd' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Andreas Brauchli <a.brauchli@elementarea.net> Cc: Pascal Sachs <pascal.sachs@sensirion.com> Link: https://lore.kernel.org/r/20200716135928.1456727-6-lee.jones@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-21iio:chemical:vz89x: Drop of_match_ptr protection and use generic fw accessorsJonathan Cameron
This change allow the driver to be used with ACPI PRP0001 and removes an antipattern that I want to avoid being copied into new IIO drivers. The handling of match_data uses a different approach as device_get_match_data() doesn't distinguish between no match, and a match but with NULL data. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20200910173242.621168-30-jic23@kernel.org
2020-09-21iio:chemical:vz89x: Introduce local struct device pointer.Jonathan Cameron
Avoids lots of repetition of &client->dev and will make the next patch tidier. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20200910173242.621168-29-jic23@kernel.org
2020-09-21iio:chemical:sgp30: Drop of_match_ptr and use generic fw accessorsJonathan Cameron
This change allow the driver to be used with ACPI PRP0001 and removes an antipattern that I want to avoid being copied into new IIO drivers. The handling of match_data uses a different approach as device_get_match_data doesn't distinguish between no match, and a match but with NULL data. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Andreas Brauchli <andreas.brauchli@sensirion.com> Link: https://lore.kernel.org/r/20200910173242.621168-28-jic23@kernel.org
2020-09-21iio:chemical:sgp30: Use local variable dev to simplify codeJonathan Cameron
This cleans up the code at bit, but is primarily here as a precusor to the next patch. I've only done this for the two functions which use the dev pointer repeatedly. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Andreas Brauchli <andreas.brauchli@sensirion.com> Link: https://lore.kernel.org/r/20200910173242.621168-27-jic23@kernel.org
2020-09-21iio:chemical:atlas-sensor: Drop of_match_ptr and use generic fw accessorsJonathan Cameron
of_match_ptr() prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver and use generic fw accessors to check if there is a fw_node and get the id. It might be neater to use pointers rather than indexes for the device_data but that is another issue and should be handled separately. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20200910173242.621168-26-jic23@kernel.org
2020-09-21iio:chemical:ams-iaq-core: Drop of_match_ptr protectionJonathan Cameron
This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20200910173242.621168-25-jic23@kernel.org
2020-09-14Merge 5.9-rc5 into staging-nextGreg Kroah-Hartman
We want the staging/iio changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-13Merge tag 'staging-5.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver fixes from Greg KH: "Here are a number of staging and IIO driver fixes for 5.9-rc5. The majority of these are IIO driver fixes, to resolve a timestamp issue that was recently found to affect a bunch of IIO drivers. The other fixes in here are: - small IIO driver fixes - greybus driver fix - counter driver fix (came in through the IIO fixes tree) All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits) iio: adc: mcp3422: fix locking on error path iio: adc: mcp3422: fix locking scope iio: adc: meson-saradc: Use the parent device to look up the calib data iio:adc:max1118 Fix alignment of timestamp and data leak issues iio:adc:ina2xx Fix timestamp alignment issue. iio:adc:ti-adc084s021 Fix alignment and data leak issues. iio:adc:ti-adc081c Fix alignment and data leak issues iio:magnetometer:ak8975 Fix alignment and data leak issues. iio:light:ltr501 Fix timestamp alignment issue. iio:light:max44000 Fix timestamp alignment and prevent data leak. iio:chemical:ccs811: Fix timestamp alignment and prevent data leak. iio:proximity:mb1232: Fix timestamp alignment and prevent data leak. iio:accel:mma7455: Fix timestamp alignment and prevent data leak. iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak. iio:accel:mma8452: Fix timestamp alignment and prevent data leak. iio: accel: kxsd9: Fix alignment of local buffer. iio: adc: rockchip_saradc: select IIO_TRIGGERED_BUFFER iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set counter: microchip-tcb-capture: check the correct variable iio: cros_ec: Set Gyroscope default frequency to 25Hz ...
2020-09-03iio: chemical: scd30: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Tomasz Duszynski <tomasz.duszynski@octakon.com> Link: https://lore.kernel.org/r/20200829064726.26268-11-krzk@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03iio: chemical: atlas-ezo-sensor: add humidity sensor supportMatt Ranostay
Add support for atlas,hum-ezo / humidity sensor which with scaling provides respective data in millipercent Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-22iio:chemical:ccs811: Fix timestamp alignment and prevent data leak.Jonathan Cameron
One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak appart from previous readings. The explicit alignment of ts is necessary to ensure consistent padding for x86_32 in which the ts would otherwise be 4 byte aligned. Fixes: 283d26917ad6 ("iio: chemical: ccs811: Add triggered buffer support") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: <Stable@vger.kernel.org>
2020-08-22iio: chemical: atlas-ezo-sensor: add support for O2 sensorMatt Ranostay
Add support for the Atlas EZO O2 chemical sensor which required some refactoring of the driver and parsing of i2c transfer. Sensor data is converted by the scaling value from percent to IIO_CONCENTRATION. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-27iio: chemical: scd30: add serial interface driverTomasz Duszynski
Add serial interface driver for the SCD30 sensor. Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-27iio: chemical: scd30: add I2C interface driverTomasz Duszynski
Add I2C interface driver for the SCD30 sensor. Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-27iio: chemical: scd30: add core driverTomasz Duszynski
Add Sensirion SCD30 carbon dioxide core driver. Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-20iio: Move attach/detach of the poll func to the coreLars-Peter Clausen
All devices using a triggered buffer need to attach and detach the trigger to the device in order to properly work. Instead of doing this in each and every driver by hand move this into the core. At this point in time, all drivers should have been resolved to attach/detach the poll-function in the same order. This patch removes all explicit calls of iio_triggered_buffer_postenable() & iio_triggered_buffer_predisable() in all drivers, since the core handles now the pollfunc attach/detach. The more peculiar change is for the 'at91-sama5d2_adc' driver, since it's not immediately obvious that removing the hooks doesn't break anything. Eugen was able to test on at91-sama5d2-adc driver, sama5d2-xplained board. All seems to be fine. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> #for at91-sama5d2-adc Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-14iio: remove left-over parent assignmentsAlexandru Ardelean
These were found by doing some shell magic: ------------ for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do if grep 'parent =' $file | grep -v trig | grep -vq devm_; then echo "$file -> $(grep "parent =" $file)" fi done ----------- The output is bearable [after the semantic patch is applied]. There is a mix of trigger assignments with some iio device parent assignments that are removed via this patch. JC: A few more added via inspection of all parent = statements in drivers/iio. Some of these may just have crossed with this series, others were less obvious to scripting due to some cross file / module boundary calls. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-14iio: remove explicit IIO device parent assignmentAlexandru Ardelean
This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-14iio: chemical: atlas-ezo-sensor: move ret variable scope in atlas_ezo_read_raw()Matt Ranostay
Move ret variable to the IIO_CHAN_INFO_RAW switch since currently only used within that scope. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-25Merge 5.7-rc7 into staging-nextGreg Kroah-Hartman
We need the staging/iio fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.Jonathan Cameron
One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak appart from previous readings. Fixes: a1d642266c14 ("iio: chemical: add support for Plantower PMS7003 sensor") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <Stable@vger.kernel.org> Acked-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
2020-05-22iio:chemical:sps30: Fix timestamp alignmentJonathan Cameron
One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. Fixes: 232e0f6ddeae ("iio: chemical: add support for Sensirion SPS30 sensor") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <Stable@vger.kernel.org> Acked-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
2020-05-16iio: chemical: add atlas-ezo-sensor initial supportMatt Ranostay
Add driver for Atlas EZO line of sensors with initial support for CO2 the sensor. This is effectively ASCII strings proxied over I2C due to these series of sensors being by default UART. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03iio: chemical: Add OF match table for CCS811 VOC sensorManivannan Sadhasivam
Add devicetree OF match table support for CCS811 VOC sensor. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03iio: chemical: Add support for external Reset and Wakeup in CCS811Manivannan Sadhasivam
CCS811 VOC sensor exposes nRESET and nWAKE pins which can be connected to GPIO pins of the host controller. These pins can be used to externally release the device from reset and also to wake it up before any I2C transaction. The initial driver support assumed that the nRESET pin is not connected and the nWAKE pin is tied to ground. This commit improves it by adding support for controlling those two pins externally using a host controller. For the case of reset, if the hardware reset is not available, the mechanism to do software reset is also added. As a side effect of doing this, the IIO device allocation needs to be slightly moved to top of probe to make use of priv data early. Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-25iio: chemical: atlas-sensor: add RTD-SM module supportMatt Ranostay
Atlas Scientific RTD-SM OEM sensor reads temperature using resistance temperature detector technology. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-29 09:15:54 +0000