summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2022-02-22hwmon: (pmbus) Clear pmbus fault/warning bits after readVikash Chandola
Almost all fault/warning bits in pmbus status registers remain set even after fault/warning condition are removed. As per pmbus specification these faults must be cleared by user. Modify hwmon behavior to clear fault/warning bit after fetching data if fault/warning bit was set. This allows to get fresh data in next read. Signed-off-by: Vikash Chandola <vikash.chandola@linux.intel.com> Link: https://lore.kernel.org/r/20220222131253.2426834-1-vikash.chandola@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-22hwmon: Handle failure to register sensor with thermal zone correctlyGuenter Roeck
If an attempt is made to a sensor with a thermal zone and it fails, the call to devm_thermal_zone_of_sensor_register() may return -ENODEV. This may result in crashes similar to the following. Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd ... Internal error: Oops: 96000021 [#1] PREEMPT SMP ... pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x18/0x60 lr : thermal_zone_device_update+0x40/0x2e0 sp : ffff800014c4fc60 x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790 x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000 x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000 x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040 x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd Call trace: mutex_lock+0x18/0x60 hwmon_notify_event+0xfc/0x110 0xffffdde1cb7a0a90 0xffffdde1cb7a0b7c irq_thread_fn+0x2c/0xa0 irq_thread+0x134/0x240 kthread+0x178/0x190 ret_from_fork+0x10/0x20 Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02) Jon Hunter reports that the exact call sequence is: hwmon_notify_event() --> hwmon_thermal_notify() --> thermal_zone_device_update() --> update_temperature() --> mutex_lock() The hwmon core needs to handle all errors returned from calls to devm_thermal_zone_of_sensor_register(). If the call fails with -ENODEV, report that the sensor was not attached to a thermal zone but continue to register the hwmon device. Reported-by: Jon Hunter <jonathanh@nvidia.com> Cc: Dmitry Osipenko <digetx@gmail.com> Fixes: 1597b374af222 ("hwmon: Add notification support") Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-19hwmon: (ntc_thermistor) Underscore Samsung thermistorLinus Walleij
The sysfs does not like that we name the thermistor something that contains a dash: ntc-thermistor thermistor: hwmon: 'ssg1404-001221' is not a valid name attribute, please fix Fix it up by switching to an underscore. Fixes: e13e979b2b3d ("hwmon: (ntc_thermistor) Add Samsung 1404-001221 NTC") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220205005804.123245-1-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-01-24hwmon: (nct6775) Fix crash in clear_caseopenGuenter Roeck
Paweł Marciniak reports the following crash, observed when clearing the chassis intrusion alarm. BUG: kernel NULL pointer dereference, address: 0000000000000028 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 4815 Comm: bash Tainted: G S 5.16.2-200.fc35.x86_64 #1 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P2.60A 05/03/2018 RIP: 0010:clear_caseopen+0x5a/0x120 [nct6775] Code: 68 70 e8 e9 32 b1 e3 85 c0 0f 85 d2 00 00 00 48 83 7c 24 ... RSP: 0018:ffffabcb02803dd8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: ffff8e8808192880 RSI: 0000000000000000 RDI: ffff8e87c7509a68 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000000a R10: 000000000000000a R11: f000000000000000 R12: 000000000000001f R13: ffff8e87c7509828 R14: ffff8e87c7509a68 R15: ffff8e88494527a0 FS: 00007f4db9151740(0000) GS:ffff8e8ebfec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000166b66001 CR4: 00000000001706e0 Call Trace: <TASK> kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x10b/0x180 vfs_write+0x209/0x2a0 ksys_write+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The problem is that the device passed to clear_caseopen() is the hwmon device, not the platform device, and the platform data is not set in the hwmon device. Store the pointer to sio_data in struct nct6775_data and get if from there if needed. Fixes: 2e7b9886968b ("hwmon: (nct6775) Use superio_*() function pointers in sio_data.") Cc: Denis Pauk <pauk.denis@gmail.com> Cc: Bernhard Seibold <mail@bernhard-seibold.de> Reported-by: Paweł Marciniak <pmarciniak@lodz.home.pl> Tested-by: Denis Pauk <pauk.denis@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-01-23hwmon: (adt7470) Prevent divide by zero in adt7470_fan_write()Dan Carpenter
The "val" variable is controlled by the user and comes from hwmon_attr_store(). The FAN_RPM_TO_PERIOD() macro divides by "val" so a zero will crash the system. Check for that and return -EINVAL. Negatives are also invalid so return -EINVAL for those too. Fixes: fc958a61ff6d ("hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-01-23hwmon: (pmbus/ir38064) Mark ir38064_of_match as __maybe_unusedGuenter Roeck
If CONFIG_PM is not enabled, the following warning is reported. drivers/hwmon/pmbus/ir38064.c:54:34: warning: unused variable 'ir38064_of_match' Mark it as __maybe_unused. Reported-by: kernel test robot <lkp@intel.com> Cc: Arthur Heymans <arthur.heymans@9elements.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-01-23hwmon: (lm90) Fix sysfs and udev notificationsGuenter Roeck
sysfs and udev notifications need to be sent to the _alarm attributes, not to the value attributes. Fixes: 94dbd23ed88c ("hwmon: (lm90) Use hwmon_notify_event()") Cc: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-01-23hwmon: (lm90) Mark alert as broken for MAX6646/6647/6649Guenter Roeck
Experiments with MAX6646 and MAX6648 show that the alert function of those chips is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 4667bcb8d8fc ("hwmon: (lm90) Introduce chip parameter structure") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-01-23hwmon: (lm90) Mark alert as broken for MAX6680Guenter Roeck
Experiments with MAX6680 and MAX6681 show that the alert function of those chips is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 4667bcb8d8fc ("hwmon: (lm90) Introduce chip parameter structure") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-01-23hwmon: (lm90) Mark alert as broken for MAX6654Guenter Roeck
Experiments with MAX6654 show that its alert function is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 229d495d8189 ("hwmon: (lm90) Add max6654 support to lm90 driver") Cc: Josh Lehan <krellan@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-01-23hwmon: (lm90) Re-enable interrupts after alert clearsGuenter Roeck
If alert handling is broken, interrupts are disabled after an alert and re-enabled after the alert clears. However, if there is an interrupt handler, this does not apply if alerts were originally disabled and enabled when the driver was loaded. In that case, interrupts will stay disabled after an alert was handled though the alert handler even after the alert condition clears. Address the situation by always re-enabling interrupts after the alert condition clears if there is an interrupt handler. Fixes: 2abdc357c55d9 ("hwmon: (lm90) Unmask hardware interrupt") Cc: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-01-23hwmon: (lm90) Reduce maximum conversion rate for G781Guenter Roeck
According to its datasheet, G781 supports a maximum conversion rate value of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only support a maximum conversion rate value of 7 (125 ms). On the other side, chips labeled G781-1 and G784 were found to support a conversion rate value of 8. There is no known means to distinguish G780 from G781 or G784; all chips report the same manufacturer ID and chip revision. Setting the conversion rate register value to 8 on chips not supporting it causes unexpected behavior since the real conversion rate is set to 0 (16 seconds) if a value of 8 is written into the conversion rate register. Limit the conversion rate register value to 7 for all G78x chips to avoid the problem. Fixes: ae544f64cc7b ("hwmon: (lm90) Add support for GMT G781") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-01-23Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linuxLinus Torvalds
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
2022-01-22proc: remove PDE_DATA() completelyMuchun Song
Remove PDE_DATA() completely and replace it with pde_data(). [akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c] [akpm@linux-foundation.org: now fix it properly] Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15Replace for_each_*_bit_from() with for_each_*_bit() where appropriateYury Norov
A couple of kernel functions call for_each_*_bit_from() with start bit equal to 0. Replace them with for_each_*_bit(). No functional changes, but might improve on readability. Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2022-01-09hwmon: (nzxt-smart2) make array detect_fans_report static constColin Ian King
Don't populate the read-only array detect_fans_report on the stack but instead it static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220109194558.45811-1-colin.i.king@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-28hwmon: (xgene-hwmon) Add free before exiting xgene_hwmon_probePeiwei Hu
Call kfifo_free(&ctx->async_msg_fifo) before error exiting instead of returning directly. Signed-off-by: Peiwei Hu <jlu.hpw@foxmail.com> Link: https://lore.kernel.org/r/tencent_C851C0324431466CBC22D60C5C6AC4A8E808@qq.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-27hwmon: (nzxt-smart2) Fix "unused function" warningAleksandr Mezin
Fix warning when building with CONFIG_PM=n (and CONFIG_WERROR=y): drivers/hwmon/nzxt-smart2.c:707:12: error: ‘nzxt_smart2_hid_reset_resume’ defined but not used [-Werror=unused-function] 707 | static int nzxt_smart2_hid_reset_resume(struct hid_device *hdev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Aleksandr Mezin <mezin.alexander@gmail.com> Link: https://lore.kernel.org/r/20211228014813.832491-1-mezin.alexander@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (dell-smm) Pack the whole smm_regs structArmin Wolf
When desiring the whole struct to be packed, __packed should be applied to the whole struct, not just every struct member except the first one. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20211221162805.104202-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (nct6775) Additional check for ChipID before ASUS WMI usageDenis Pauk
WMI monitoring methods can be changed or removed in new ASUS boards BIOS versions. Such versions return zero instead of a real one as Chip ID. Commit adds additional validation for the result of Chip ID call before enabling access by ASUS WMI methods. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807 Signed-off-by: Denis Pauk <pauk.denis@gmail.com> Link: https://lore.kernel.org/r/20211218205206.615865-1-pauk.denis@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (mr75203) fix wrong power-up delay valueArseny Demidov
In the file mr75203.c we have a macro named POWER_DELAY_CYCLE_256, the correct value should be 0x100. The register ip_tmr is expressed in units of IP clk cycles, in accordance with the datasheet. Typical power-up delays for Temperature Sensor are 256 cycles i.e. 0x100. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Arseny Demidov <a.demidov@yadro.com> Link: https://lore.kernel.org/r/20211219102239.1112-1-a.demidov@yadro.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon/pmbus: (ir38064) Fix spelling mistake "comaptible" -> "compatible"Colin Ian King
There is a spelling mistake in the module description, fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211220155527.179125-1-colin.i.king@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon/pmbus: (ir38064) Expose a regulatorPatrick Rudolph
The chip series supported by this driver are voltage regulators, so expose them to the regulator subsystem. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Link: https://lore.kernel.org/r/20211213142814.264802-4-arthur.heymans@9elements.com [groeck: Added brief patch description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon/pmbus: (ir38064) Add of_match_tableArthur Heymans
Add the missing of_match_table to allow device tree probing. Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com> Link: https://lore.kernel.org/r/20211213142814.264802-3-arthur.heymans@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon/pmbus: (ir38064) Add support for IR38060, IR38164 IR38263Patrick Rudolph
The IR38060, IR38164 and IR38263 can be supported using this driver. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com> Link: https://lore.kernel.org/r/20211213142814.264802-2-arthur.heymans@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.Aleksandr Mezin
This driver implements monitoring and control of fans plugged into the device. Besides typical speed monitoring and PWM duty cycle control, voltage and current are reported for every fan. The device also has 2 connectors for RGB LEDs, support for them isn't implemented (mainly because there is no standardized sysfs interface). Also, the device has a noise sensor, but the sensor seems to be completely useless (and very imprecise), so support for it isn't implemented too. The driver coexists with userspace tools that access the device through hidraw interface with no known issues. The driver has been tested on x86_64, built in and as a module. Some changes/improvements were suggested by Jonas Malaco. Signed-off-by: Aleksandr Mezin <mezin.alexander@gmail.com> Link: https://lore.kernel.org/r/20211031033058.151014-1-mezin.alexander@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (nct6775) add ROG STRIX B550-A/X570-I GAMINGDenis Pauk
ASUS ROG STRIX B550-A/X570-I GAMING boards have got an nct6775 chip, but by default there's no use of it because of resource conflict with WMI method. This commit adds "ROG STRIX B550-A GAMING" and "ROG STRIX X570-I GAMING" to the list of boards that can be monitored using ASUS WMI. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807 Signed-off-by: Denis Pauk <pauk.denis@gmail.com> Tested-by: Daniel Gibson <metalcaedes@gmail.com> Tested-by: Michael Altizer <michael@theoddone.net> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Link: https://lore.kernel.org/r/20211211180037.367062-1-pauk.denis@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (pmbus) Add support for MPS Multi-phase mp5023Howard.Chiu@quantatw.com
Add support for mp5023 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a Hot-Swap Controller. Signed-off-by: Howard Chiu <howard.chiu@quantatw.com> Link: https://lore.kernel.org/r/HKAPR04MB400349AA406694FB976D78D096709@HKAPR04MB4003.apcprd04.prod.outlook.com [groeck: Added MODULE_IMPORT_NS, entry in index.rst] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (pmbus) Add Delta AHE-50DC fan control module driverZev Weiss
This device is an integrated module of the Delta AHE-50DC Open19 power shelf. I haven't been able to procure any proper documentation for it, but it seems to be a (somewhat minimally) PMBus-compliant device. It provides four fan speeds, four temperatures (three standard and one manufacturer-specific via a virtual second page), and a vin reading. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20211208213703.2577-2-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Add Samsung 1404-001221 NTCLinus Walleij
This adds the Samsung 1404-001221 NTC thermistor to the NTC thermistor driver. As far as I can tell it is electrically compatible with the Murata 47K NTC thermistor. This thermistor is mounted in a variety of Samsung products. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211215174241.1496169-1-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Drop OF dependencyLinus Walleij
The driver has been augmented to just use device properties so the OF dependency can be dropped. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211215142933.1409324-1-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (dell-smm) Unify i8k_ioctl() and i8k_ioctl_unlocked()Armin Wolf
The only purpose of i8k_ioctl() is to call i8k_ioctl_unlocked() with i8k_mutex held. Judging from the hwmon code, this mutex only needs to be held when setting the fan speed/mode, so the operation of I8K_SET_FAN is guaranteed to be atomic. Unify both functions and reduce the locking of i8k_mutex to I8K_SET_FAN. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211211155422.16830-3-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (dell-smm) Simplify ioctl handlerArmin Wolf
The second switch-case has no real purpose: - for I8K_BIOS_VERSION, val does not represent a return value, making the check for error values unnecessary. - for I8K_MACHINE_ID, val remains zero, so the error check is unnecessary too. Remove the switch-case and move the calls to copy_to_user() into the first switch-case for I8K_BIOS_VERSION/_MACHINE_ID. Omit buff[] since data->bios_machineid already contains the string with the necessary zero padding through devm_kzalloc(). Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211211155422.16830-2-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (raspberrypi) Exit immediately in case of error in initArmin Wolf
Exit immediately if devm_hwmon_device_register_with_info() fails since registering a delayed work whould be useless in such a case anyway. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20211211184449.18211-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (nct6775) delete some extension linesDan Carpenter
This code can fit on one line. No need to break it up. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211215114050.GB14967@kili Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Move DT matches to the driver blockLinus Walleij
This moves the device tree match data toward the end of the driver which is the convention, here we can also add ACPI and similar match data in a conforming manner. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211205235948.4167075-3-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Switch to generic firmware propsLinus Walleij
This switches to retrieveing the configuration of the NTC from generic firmware properties so that we get neutral from device tree: now ACPI or, more importantly, software nodes can be used to spawn NTC devices provided they have the required properties. This was inspired by the similar changes made to the IIO drivers. This was tested on the Ux500 HREF with the NTC devices probing from device tree just as fine after this as before. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211206020423.62402-2-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Move and refactor DT parsingLinus Walleij
Move the parsing of the DT config right above probe(). Allocate the state container for the driver in probe() instead of inside the DT config parsing function: as a result return an int instead of a pointer. Drop the check for !np: we can only probe from DT right now so no risk of ending up here. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211206020423.62402-1-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (adm1031) Remove redundant assignment to variable rangeColin Ian King
Variable range is being initialized with a value that is never read, it is being re-assigned in the next statement. The assignment is redundant, remove it and initialize range using the second assigned value. Clean up the formatting too by adding missing spaces. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211204233155.55454-1-colin.i.king@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (asus_wmi_sensors) fix an array overflowDan Carpenter
Smatch detects this array overflow: drivers/hwmon/asus_wmi_sensors.c:569 asus_wmi_configure_sensor_setup() error: buffer overflow 'hwmon_attributes' 8 <= 9 The hwmon_attributes[] array should have "hwmon_max" so that it gets larger when more attributes are added. Fixes: 9d07e54a25b8 ("hwmon: (asus_wmi_sensors) Support X370 Asus WMI.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211130105117.GH5827@kili Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (asus_wmi_ec_sensors) fix array overflowDan Carpenter
Smatch detected an array out of bounds error: drivers/hwmon/asus_wmi_ec_sensors.c:562 asus_wmi_ec_configure_sensor_setup() error: buffer overflow 'hwmon_attributes' 8 <= 9 The hwmon_attributes[] array needs to be declared with "hwmon_max" elements. Fixes: c04c7f7bfcbe ("hwmon: (asus_wmi_ec_sensors) Support B550 Asus WMI.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211130105034.GG5827@kili Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (sht4x) Add device tree match tableDavid Mosberger-Tang
This patch enables automatic loading of the sht4x module via a device tree table entry. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Link: https://lore.kernel.org/r/20211121160637.2312106-1-davidm@egauge.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Merge platform dataLinus Walleij
Allocate one state container for the device: struct ntc_data. Move all items from struct ntc_thermistor_platform_data into this struct and simplify. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211125020841.3616359-5-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Drop read_uv() depend on OF and IIOLinus Walleij
The only possible assignment of a function to get a voltage to convert to a resistance is to use the internal function ntc_adc_iio_read() which is only available when using IIO and OF. Bite the bullet and mandate OF and IIO, drop the read_uv() callback abstraction and some ifdefs. As no board is using the platform data, all users are using OF and IIO anyway. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211125020841.3616359-4-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Drop get_ohm()Linus Walleij
Nothing in the kernel (this driver) is using the callback to read ohms directly. We always read a voltage and convert it to a resistance. Drop this callback. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211125020841.3616359-3-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Merge platform data into driverLinus Walleij
Platform data is supposed to be used with "board files", device descriptions in C. Since the introduction of the NTC driver in 2011, no such platforms have been submitted to the Linux kernel, and their use is strongly discouraged in favor of Device Tree, ACPI or as last resort software firmware nodes. Drop the external header and copy the platform data into the driver file. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211125020841.3616359-2-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (jc42) Add support for ONSEMI N34TS04Guenter Roeck
N34TS04 is a JC42.4 compatible temperature sensor from ONSEMI. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (k10temp) Support up to 12 CCDs on AMD Family of processorsBabu Moger
The current driver can read the temperatures from upto 8 CCDs (Core-Complex Die). The newer AMD Family 19h Models 10h-1Fh and A0h-AFh can support up to 12 CCDs. Update the driver to read up to 12 CCDs. Signed-off-by: Babu Moger <babu.moger@amd.com> Link: https://lore.kernel.org/r/163776976762.904164.5618896687524494215.stgit@bmoger-ubuntu Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (asus_wmi_sensors) Support X370 Asus WMI.Denis Pauk
Provides a Linux kernel module "asus_wmi_sensors" that provides sensor readouts via ASUS' WMI interface present in the UEFI of X370/X470/B450/X399 Ryzen motherboards. Supported motherboards: * ROG CROSSHAIR VI HERO, * PRIME X399-A, * PRIME X470-PRO, * ROG CROSSHAIR VI EXTREME, * ROG CROSSHAIR VI HERO (WI-FI AC), * ROG CROSSHAIR VII HERO, * ROG CROSSHAIR VII HERO (WI-FI), * ROG STRIX B450-E GAMING, * ROG STRIX B450-F GAMING, * ROG STRIX B450-I GAMING, * ROG STRIX X399-E GAMING, * ROG STRIX X470-F GAMING, * ROG STRIX X470-I GAMING, * ROG ZENITH EXTREME, * ROG ZENITH EXTREME ALPHA. Co-developed-by: Ed Brindley <kernel@maidavale.org> Signed-off-by: Ed Brindley <kernel@maidavale.org> Signed-off-by: Denis Pauk <pauk.denis@gmail.com> [groeck: Squashed: "hwmon: Fix warnings in asus_wmi_sensors.rst documetation."] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (asus_wmi_ec_sensors) Support B550 Asus WMI.Denis Pauk
Linux HWMON sensors driver for ASUS motherboards to read sensors from the embedded controller. Many ASUS motherboards do not publish all the available sensors via the Super I/O chip but the missing ones are available through the embedded controller (EC) registers. This driver implements reading those sensor data via the WMI method BREC, which is known to be present in all ASUS motherboards based on the AMD 500 series chipsets (and probably is available in other models too). The driver needs to know exact register addresses for the sensors and thus support for each motherboard has to be added explicitly. The EC registers do not provide critical values for the sensors and as such they are not published to the HWMON. Supported motherboards: * PRIME X570-PRO * Pro WS X570-ACE * ROG CROSSHAIR VIII HERO * ROG CROSSHAIR VIII DARK HERO * ROG CROSSHAIR VIII FORMULA * ROG STRIX X570-E GAMING * ROG STRIX B550-I GAMING * ROG STRIX B550-E GAMING Co-developed-by: Eugene Shalygin <eugene.shalygin@gmail.com> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Denis Pauk <pauk.denis@gmail.com> Tested-by: Tor Vic <torvic9@mailbox.org> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-29 23:46:23 +0000