summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2020-11-13hwmon: (amd_energy) modify the visibility of the countersNaveen Krishna Chatradhi
This patch limits the visibility to owner and groups only for the energy counters exposed through the hwmon based amd_energy driver. Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Link: https://lore.kernel.org/r/20201112172159.8781-1-nchatrad@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-11-12hwmon: (applesmc) Re-work SMC commsBrad Campbell
Commit fff2d0f701e6 ("hwmon: (applesmc) avoid overlong udelay()") introduced an issue whereby communication with the SMC became unreliable with write errors like : [ 120.378614] applesmc: send_byte(0x00, 0x0300) fail: 0x40 [ 120.378621] applesmc: LKSB: write data fail [ 120.512782] applesmc: send_byte(0x00, 0x0300) fail: 0x40 [ 120.512787] applesmc: LKSB: write data fail The original code appeared to be timing sensitive and was not reliable with the timing changes in the aforementioned commit. This patch re-factors the SMC communication to remove the timing dependencies and restore function with the changes previously committed. Tested on : MacbookAir6,2 MacBookPro11,1 iMac12,2, MacBookAir1,1, MacBookAir3,1 Fixes: fff2d0f701e6 ("hwmon: (applesmc) avoid overlong udelay()") Reported-by: Andreas Kemnade <andreas@kemnade.info> Tested-by: Andreas Kemnade <andreas@kemnade.info> # MacBookAir6,2 Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brad Campbell <brad@fnarfbargle.com> Signed-off-by: Henrik Rydberg <rydberg@bitmath.org> Link: https://lore.kernel.org/r/194a7d71-a781-765a-d177-c962ef296b90@fnarfbargle.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-11-12hwmon: (pwm-fan) Fix RPM calculationPaul Barker
To convert the number of pulses counted into an RPM estimation, we need to divide by the width of our measurement interval instead of multiplying by it. If the width of the measurement interval is zero we don't update the RPM value to avoid dividing by zero. We also don't need to do 64-bit division, with 32-bits we can handle a fan running at over 4 million RPM. Signed-off-by: Paul Barker <pbarker@konsulko.com> Link: https://lore.kernel.org/r/20201111164643.7087-1-pbarker@konsulko.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-11-03hwmon: (pmbus) Add mutex locking for sysfs readsRobert Hancock
As part of commit a919ba06979a7 ("hwmon: (pmbus) Stop caching register values"), the update of the sensor value is now triggered directly by the sensor attribute value being read from sysfs. This created (or at least made much more likely) a locking issue, since nothing protected the device page selection from being unexpectedly modified by concurrent reads. If sensor values on different pages on the same device were being concurrently read by multiple threads, this could cause spurious read errors due to the page register not reading back the same value last written, or sensor values being read from the incorrect page. Add locking of the update_lock mutex in pmbus_show_sensor and pmbus_show_samples so that these cannot result in concurrent reads from the underlying device. Fixes: a919ba06979a7 ("hwmon: (pmbus) Stop caching register values") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Alex Qiu <xqiu@google.com> Link: https://lore.kernel.org/r/20201103193315.3011800-1-robert.hancock@calian.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-26hwmon: (pmbus/max20730) use scnprintf() instead of snprintf()Dan Carpenter
The snprintf() function returns the number of characters which would have been printed if there were enough space, but the scnprintf() returns the number of characters which were actually printed. If the buffer is not large enough, then using snprintf() would result in a read overflow and an information leak. Fixes: 8910c0bd533d ("hwmon: (pmbus/max20730) add device monitoring via debugfs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201022070824.GC2817762@mwanda Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-14Merge tag 'driver-core-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 5.10-rc1 They include a lot of different things, all related to the driver core and/or some driver logic: - sysfs common write functions to make it easier to audit sysfs attributes - device connection cleanups and fixes - devm helpers for a few functions - NOIO allocations for when devices are being removed - minor cleanups and fixes All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits) regmap: debugfs: use semicolons rather than commas to separate statements platform/x86: intel_pmc_core: do not create a static struct device drivers core: node: Use a more typical macro definition style for ACCESS_ATTR drivers core: Use sysfs_emit for shared_cpu_map_show and shared_cpu_list_show mm: and drivers core: Convert hugetlb_report_node_meminfo to sysfs_emit drivers core: Miscellaneous changes for sysfs_emit drivers core: Reindent a couple uses around sysfs_emit drivers core: Remove strcat uses around sysfs_emit and neaten drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functions sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs output dyndbg: use keyword, arg varnames for query term pairs driver core: force NOIO allocations during unplug platform_device: switch to simpler IDA interface driver core: platform: Document return type of more functions Revert "driver core: Annotate dev_err_probe() with __must_check" Revert "test_firmware: Test platform fw loading on non-EFI systems" iio: adc: xilinx-xadc: use devm_krealloc() hwmon: pmbus: use more devres helpers devres: provide devm_krealloc() syscore: Use pm_pr_dbg() for syscore_{suspend,resume}() ...
2020-10-14Merge tag 'mfd-next-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for initialising shared (between children) Regmaps - Add support for Kontron SL28CPLD - Add support for ENE KB3930 Embedded Controller - Add support for Intel FPGA PAC MAX 10 BMC New Device Support: - Add support for Power to Ricoh RN5T618 - Add support for UART to Intel Lakefield - Add support for LP87524_Q1 to Texas Instruments LP87565 New Functionality: - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1 - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x - Use new GPIOD API; dm355evm_msp - Add wake-up capability; sprd-sc27xx-spi - Add ACPI support; kempld-core Fix-ups: - Trivial (spelling/whitespace); Kconfig, ab8500 - Fix for unused variables; khadas-mcu, kempld-core - Remove unused header file(s); mt6360-core - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic - Add COMPILE_TEST support; asic3, tmio_core - Add dependency on I2C; SL28CPLD Bug Fixes: - Fix memory leak(s); sm501 - Do not free regmap_config's 'name' until exit; syscon" * tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits) mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI mfd: sl28cpld: Depend on I2C mfd: asic3: Build if COMPILE_TEST=y dt-bindings: mfd: Correct interrupt flags in examples mfd: Add ACPI support to Kontron PLD driver mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC mfd: lp87565: Add LP87524-Q1 variant dt-bindings: mfd: Add LP87524-Q1 dt-bindings: mfd: lp87565: Convert to yaml mfd: mt6360: Remove unused include <linux/version.h> mfd: sm501: Fix leaks in probe() mfd: syscon: Don't free allocated name for regmap_config dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings dt-bindings: mfd: ab8500: Remove weird Unicode characters mfd: sprd: Add wakeup capability for PMIC IRQ mfd: intel-lpss: Add device IDs for UART ports for Lakefield mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table mfd: wcd934x: Simplify with dev_err_probe() mfd: stmfx: Simplify with dev_err_probe() ...
2020-10-06hwmon: (pmbus/max20730) adjust the vout reading given voltage dividerChu Lin
Problem: We use voltage dividers so that the voltage presented at the voltage sense pins is confusing. We might need to convert these readings to more meaningful readings given the voltage divider. Solution: Read the voltage divider resistance from dts and convert the voltage reading to a more meaningful reading. Testing: max20730 with voltage divider Signed-off-by: Chu Lin <linchuyuan@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201004031445.2321090-3-linchuyuan@google.com [groeck: Return -EINVAL instead of -ENODEV on bad deevicetree data] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-06hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controllerRahul Tanwar
PVT controller (MR75203) is used to configure & control Moortec embedded analog IP which contains temprature sensor(TS), voltage monitor(VM) & process detector(PD) modules. Add hardware monitoring driver to support MR75203 PVT controller. Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Link: https://lore.kernel.org/r/05b59cd860d2a1aa0a68ab300829efe709645184.1601889876.git.rahul.tanwar@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-05hwmon: (mlxreg-fan) Fix double "Mellanox"Geert Uytterhoeven
Remove the duplicate "Mellanox" in the help text for the Mellanox FAN driver configuration option. Fixes: 65afb4c8e7e4e7e7 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201005124843.26688-1-geert+renesas@glider.be Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-05hwmon: (pmbus/max20730) add device monitoring via debugfsUgur Usug
Add debugfs interface support for accessing device specific registers (MFR_VOUT_MIN, MFR_DEVSET1 and MFR_DEVSET2) and others including OPERATION, ON_OFF_CONFIG, SMB_ALERT_MASK, VOUT_MODE, VOUT_COMMAND and VOUT_MAX. Signed-off-by: Ugur Usug <ugur.usug@maximintegrated.com> Link: https://lore.kernel.org/r/MWHPR11MB1965C01083AD013C630646B2FD3B0@MWHPR11MB1965.namprd11.prod.outlook.com [groeck: Resolved conflics seen due to PMBus driver API changes] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-05hwmon: (pmbus/max34440) Fix OC fault limitsSteve Foreman
The max34* family have the IOUT_OC_WARN_LIMIT and IOUT_OC_CRIT_LIMIT registers swapped. Cc: stable@vger.kernel.org Signed-off-by: Steve Foreman <foremans@google.com> [groeck: Updated subject, use C comment style, tab after defines] [groeck: Added missing break; statements (by alexandru.ardelean@analog.com)] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (bt1-pvt) Wait for the completion with timeoutSerge Semin
If the PVT sensor is suddenly powered down while a caller is waiting for the conversion completion, the request won't be finished and the task will hang up on this procedure until the power is back up again. Let's call the wait_for_completion_timeout() method instead to prevent that. The cached timeout is exactly what we need to predict for how long conversion could normally last. Fixes: 87976ce2825d ("hwmon: Add Baikal-T1 PVT sensor driver") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200920110924.19741-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (bt1-pvt) Cache current update timeoutSerge Semin
Instead of converting the update timeout data to the milliseconds each time on the read procedure let's preserve the currently set timeout in the dedicated driver private data cache. The cached value will be then used in the timeout read method and in the alarm-less data conversion to prevent the caller task hanging up in case if the PVT sensor is suddenly powered down. Fixes: 87976ce2825d ("hwmon: Add Baikal-T1 PVT sensor driver") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200920110924.19741-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (bt1-pvt) Test sensor power supply on probeSerge Semin
Baikal-T1 PVT sensor has got a dedicated power supply domain (feed up by the external GPVT/VPVT_18 pins). In case if it isn't powered up, the registers will be accessible, but the sensor conversion just won't happen. Due to that an attempt to read data from any PVT sensor will cause the task hanging up. For instance that will happen if XP11 jumper isn't installed on the Baikal-T1-based BFK3.1 board. Let's at least test whether the conversion work on the device probe procedure. By doing so will make sure that the PVT sensor is powered up at least at boot time. Fixes: 87976ce2825d ("hwmon: Add Baikal-T1 PVT sensor driver") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200920110924.19741-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (lm75) Add regulator supportAlban Bedel
Add regulator support for boards where the sensor first need to be powered up before it can be used. Signed-off-by: Alban Bedel <alban.bedel@aerq.com> Link: https://lore.kernel.org/r/20201001145738.17326-4-alban.bedel@aerq.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: Add hwmon driver for Intel MAX 10 BMCXu Yilun
This patch adds hwmon functionality for Intel MAX 10 BMC chip. This BMC chip connects to a set of sensor chips to monitor current, voltage, thermal and power of different components on board. The BMC firmware is responsible for sensor data sampling and recording in shared registers. Host driver reads the sensor data from these shared registers and exposes them to users as hwmon interfaces. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1600669071-26235-3-git-send-email-yilun.xu@intel.com [groeck: Adjusted subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controllerVadim Pasternak
Add support for mp295 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a dual-loop, digital, multi-phase controller. This device: - Supports two power rail. - Provides 8 pulse-width modulations (PWMs), and can be configured up to 8-phase operation for rail 1 and up to 4-phase operation for rail 2. - Supports two pages 0 and 1 for telemetry and also pages 2 and 3 for configuration. - Can configured VOUT readout in direct or VID format and allows setting of different formats on rails 1 and 2. For VID the following protocols are available: VR13 mode with 5-mV DAC; VR13 mode with 10-mV DAC, IMVP9 mode with 5-mV DAC. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20200926204957.10268-2-vadimp@nvidia.com [groeck: Cleaned up a couple of error returns; fixed up API changes] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (tmp513) fix spelling typo in commentsWang Qing
Modify the comment typo: "compliment" -> "complement". Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1601086116-32218-1-git-send-email-wangqing@vivo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (amd_energy) Improve the accumulation logicNaveen Krishna Chatradhi
Factor out the common code in the accumulation functions for core and socket accumulation. While at it, handle the return value of the amd_create_sensor() function. Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Link: https://lore.kernel.org/r/20200929105322.8919-4-nchatrad@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-29hwmon: (amd_energy) optimize accumulation intervalNaveen Krishna Chatradhi
On a system with course grain resolution of energy unit (milli J) the accumulation thread can be executed less frequently than on the system with fine grain resolution(micro J). This patch sets the accumulation thread interval to an optimum value calculated based on the (energy unit) resolution supported by the hardware (assuming a peak wattage of 240W). Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Link: https://lore.kernel.org/r/20200929105322.8919-3-nchatrad@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-29hwmon: (amd_energy) Move label out of accumulation structureAkshay Gupta
At present, core & socket labels are defined in struct sensor_accumulator This patch moves it to the amd_energy_data structure, which will help in calling memset on struct sensor_accumulator to optimize the code. Signed-off-by: Akshay Gupta <Akshay.Gupta@amd.com> Link: https://lore.kernel.org/r/20200929105322.8919-2-nchatrad@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-24hwmon: (adm9240) Convert to regmapChris Packham
Convert the adm9240 driver to using regmap and add error handling. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20200924085102.15219-4-chris.packham@alliedtelesis.co.nz [groeck: Fixed context conflict against 'hwmon: use simple i2c probe function'] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-24hwmon: (adm9240) Create functions for updating measure and configChris Packham
Split the body of adm9240_update_device() into two helper functions adm9240_update_measure() and adm9240_update_config(). Although neither of the new helpers returns an error yet lay the groundwork for propagating failures through to the sysfs readers. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20200924085102.15219-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-24hwmon: (adm9240) Use loops to avoid duplicated codeChris Packham
Use loops for reading temp_max and initialising FAN_MIN/TEMP_MAX rather than duplicating code. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20200924085102.15219-2-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (k10temp) Add support for Zen3 CPUsWei Huang
Zen3 thermal info is supported via a new PCI device ID. Also the voltage telemetry registers and the current factors need to be defined. k10temp driver then searches for CPU family 0x19 and configures k10temp_data accordingly. Signed-off-by: Wei Huang <wei.huang2@amd.com> Link: https://lore.kernel.org/r/20200914200715.1997757-1-wei.huang2@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (pmbus) Move boolean error condition check to generating codeGuenter Roeck
0-day rightfully complains about a sometimes uninitialized variable in pmbus_get_boolean(). drivers/hwmon/pmbus/pmbus_core.c:903:13: warning: variable 'ret' is used uninitialized whenever 'if' condition is true } else if (!s1 || !s2) { While that is technically true, it won't be hit in the field since the condition indicates a programming error. Move the check of that condition into the code generating the attribute entry, and refuse generating the attribute if the condition is true. Swap the condition check in pmbus_get_boolean() to ensure that static analyzers don't get a hiccup (because we check if s1 and s2 are NULL, static analyzers may believe that they can be NULL independently of each other). Reported-by: kernel test robot <lkp@intel.com> Cc: Alex Qiu <xqiu@google.com> Reviewed-by: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (pmbus) Expose PEC debugfs attributeAndrew Jeffery
Enable runtime debug control of whether the PEC byte is exchanged with the PMBus device. Some manufacturers have asked for the PEC to be disabled as part of debugging driver communication issues with devices. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20200910021106.2958382-1-andrew@aj.id.au [groeck: Replace %1llu with %llu] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (pmbus) Stop caching register valuesGuenter Roeck
Caching register values can be very expensive for PMBus chips. Some modern chips may have 10 or more pages, with several sensors supported per page. For example, MAX16601 creates more than 90 sysfs attributes. Register caching for such chips is time consuming, especially if only a few attributes are read on a regular basis. For MAX16601, it was observed that it can take up to two seconds to read all attributes on a slow I2C bus. In this situation, register caching results in the opposite of its intention: It increases the number of I2C operations, in some cases substantially, and it results in large latency when trying to access individual sensor data. Drop all register caching to solve the problem. Since it is no longer necessary, drop status register mapping as part of the change, and specify status registers directly. Cc: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alex Qiu <xqiu@google.com> Tested-by: Alex Qiu <xqiu@google.com> Link: https://lore.kernel.org/r/20200904163314.259087-1-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (k10temp) Take out debugfs codeGuenter Roeck
The debugfs code was intended to aid figuring out functionality of undocumented registers. Turns out that wasn't very helpful, since register locations change too much between AMD chip revisions, and the data isn't really valuable for chips where it isn't already supported. On top of that, its existence has been used as argument for providing pseudo-API debugfs functions in other drivers. So let's just take it out. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (gsc-hwmon) add fan sensorTim Harvey
Add a fan sensor to report RPM's from a fan tach input. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (k10temp) Define SVI telemetry and current factors for Zen2 CPUsWei Huang
The voltage telemetry registers for Zen2 are different from Zen1. Also the factors of CPU current values are changed on Zen2. Add new definitions for these register. Signed-off-by: Wei Huang <wei.huang2@amd.com> Link: https://lore.kernel.org/r/20200827054242.2347-2-wei.huang2@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (k10temp) Create common functions and macros for Zen CPU familiesWei Huang
Many SMN thermal registers in Zen CPU families are common across different generations. For long-term code maintenance, it is better to rename these macro and function names to Zen. Signed-off-by: Wei Huang <wei.huang2@amd.com> Link: https://lore.kernel.org/r/20200827054242.2347-1-wei.huang2@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (scmi-hwmon) Avoid comma separated statementsJoe Perches
Use semicolons and braces. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/5e1ca60df261e3bfd0e6510e388581a1d1f52c77.1598331149.git.joe@perches.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (pmbus/adm1266) read blackboxAlexandru Tachici
Use the nvmem kernel api to expose the black box chip functionality to userspace. Using this feature, the device is capable of recording to nonvolatile flash memory the vital data about the system status that caused the system to perform a black box write. A blackbox is 64 bytes of data containing all the status registers, last two states of the sequencer, timestamp and counters. The mapping of this data is described in the adm1266 datasheet. On power-up the driver sets the unix time to the adm1266 using the SET_RTC command. This value is incremented by an internal clock and it is used as timestamp for the black box feature. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20200812142055.9213-6-alexandru.tachici@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (pmbus/adm1266) add debugfs for statesAlexandru Tachici
Add a debugfs entry which prints the current state of the adm1266 sequencer. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20200812142055.9213-5-alexandru.tachici@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (pmbus/adm1266) Add support for GPIOsAlexandru Tachici
Adm1266 exposes 9 GPIOs and 16 PDIOs which are currently read-only. They are controlled by the internal sequencing engine. This patch makes adm1266 driver expose GPIOs and PDIOs to user-space using GPIO provider kernel api. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20200812142055.9213-4-alexandru.tachici@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (pmbus/adm1266) Add Block process callAlexandru Tachici
PmBus devices support Block Write-Block Read Process Call described in SMBus specification v 2.0 with the exception that Block writes and reads are permitted to have up 255 data bytes instead of max 32 bytes (SMBus). This patch adds Block WR process call support for ADM1266. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20200812142055.9213-3-alexandru.tachici@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (pmbus) Add support for ADM1266Alexandru Tachici
Add pmbus probing driver for the adm1266 Cascadable Super Sequencer with Margin Control and Fault Recording. Driver is using the pmbus_core, creating sysfs files under hwmon for inputs: vh1->vh4 and vp1->vp13. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20200812142055.9213-2-alexandru.tachici@analog.com [groeck: Use .probe_new function, adjust for changed pmbus_do_probe API] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: shtc1: add support for device tree bindingsChris Ruehl
Add support for DTS bindings for the sensirion shtc1,shtw1 and shtc3. Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200815012227.32538-2-chris.ruehl@gtsys.com.hk [groeck: Resolved conflicts] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (pwm-fan) Use dev_err_probe() to simplify error handlingAnson Huang
dev_err_probe() can reduce code size, uniform error handling and record the defer probe reason etc., use it to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1597649673-22329-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (dme1737) use simple i2c probeStephen Kitt
As part of the ongoing i2c transition to the simple probe ("probe_new"), this patch uses i2c_match_id to retrieve the driver_data for the probed device. The id parameter is thus no longer necessary and the simple probe can be used instead. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200821160035.590142-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (f75375s) use simple i2c probeStephen Kitt
As part of the ongoing i2c transition to the simple probe ("probe_new"), this patch uses i2c_match_id to retrieve the driver_data for the probed device. The id parameter is thus no longer necessary and the simple probe can be used instead. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200821160159.591293-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (tmp513) use simple i2c probeStephen Kitt
As part of the ongoing i2c transition to the simple probe ("probe_new"), this patch uses i2c_match_id to retrieve the driver_data for the probed device. The id parameter is thus no longer necessary and the simple probe can be used instead. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200821160231.592571-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: use simple i2c probe function (take 2)Stephen Kitt
Many hwmon drivers don't use the id information provided by the old i2c probe function, and the remainder can easily be adapted to the new form ("probe_new") by calling i2c_match_id explicitly. This avoids scanning the identifier tables during probes. Drivers which didn't use the id are converted as-is; drivers which did are modified to call i2c_match_id() with the same level of error-handling (if any) as before. This patch wraps up the transition for hwmon, with four stragglers not included in the previous large patch. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200821160354.594715-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (ltc2947) use simple i2c probeStephen Kitt
This driver doesn't use the id information provided by the old i2c probe function, so it can trivially be converted to the simple ("probe_new") form. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200813162851.1519546-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (emc2103) use simple i2c probeStephen Kitt
This driver doesn't use the id information provided by the old i2c probe function, so it can trivially be converted to the simple ("probe_new") form. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200813162704.1517951-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (asc7621) use simple i2c probeStephen Kitt
This driver doesn't use the id information provided by the old i2c probe function, so it can trivially be converted to the simple ("probe_new") form. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200813162544.1516647-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (lm73) use simple i2c probeStephen Kitt
This driver doesn't use the id information provided by the old i2c probe function, so it can trivially be converted to the simple ("probe_new") form. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200813162300.1514695-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-18 19:01:19 +0000