summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/r600.c
AgeCommit message (Collapse)Author
2014-03-18Merge tag 'v3.14-rc7' into drm-nextDave Airlie
Linux 3.14-rc7 Backmerge to help out Intel guys.
2014-03-06drm/radeon: resume old pm lateAlex Deucher
Moving the pm resume up in the init order to fix dpm seems to have regressed somes cases with the old pm code. Move it back to late resume. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-02-18drm/radeon: drop radeon_ring_force_activityChristian König
The reason for the false positives was fixed quite some time ago and since most engines can still execute NOPs while being locked up it leads to false negatives. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2014-02-18drm/radeon: drop drivers copy of the rptrChristian König
In all cases where it really matters we are using the read functions anyway. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2014-02-06drm/radeon: fix UVD IRQ support on 7xxAlex Deucher
Otherwise decoding isn't really useable. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-01-29drm/radeon: clean up active vram sizingAlex Deucher
If we are not able to properly initialize one of the gpu engines for buffer paging, we limit vram to the size of the cpu visible aperture. We generally either use the gfx or dma engine to do this. Clean up the size limiting code to only adjust the size based on what ring is selected for buffer paging rather than making assumptions about which engine is selected for paging. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2014-01-29drm/radeon: skip async dma init on r6xxAlex Deucher
The hw is buggy and it's not currently used, but it's currently still initialized by the driver. Skip the init. Skipping init also seems to improve stability with dpm on some r6xx asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=66963 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2014-01-20drm/radeon: set the full cache bit for fences on r7xx+Alex Deucher
Needed to properly flush the read caches for fences. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-01-08drm/radeon: implement pci config reset for r6xx/7xx (v3)Alex Deucher
pci config reset is a low level reset that resets the entire chip from the bus interface. It can be more reliable if soft reset fails. There's not much information still available on r6xx, so r6xx is based on guess-work. v2: put behind module parameter v3: add IGP check Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon: remove generic rptr/wptr functions (v2)Alex Deucher
Fill in asic family specific versions rather than using the generic version. This lets us handle asic specific differences more easily. In this case, we disable sw swapping of the rtpr writeback value on r6xx+ since the hw does it for us. Fixes bogus rptr readback on BE systems. v2: remove missed cpu_to_le32(), add comments Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/pm: move pm handling into the asic specific codeAlex Deucher
We need more control over the ordering of dpm init with respect to the rest of the asic. Specifically, the SMC has to be initialized before the rlc and cg/pg. The pm code currently initializes late in the driver, but we need it to happen much earlier so move pm handling into the asic specific callbacks. This makes dpm more reliable and makes clockgating work properly on CIK parts and should help on SI parts as well. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon: re-order firmware loading in preparation for dpm reworkAlex Deucher
We need to reorder the driver init sequence to better accomodate dpm which needs to be loaded earlier in the init sequence. Move fw init up so that it's available for dpm init. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-15drm/radeon: allow semaphore emission to failChristian König
To workaround bugs and/or certain limits it's sometimes useful to fall back to waiting on fences. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-11-08Merge tag 'drm-intel-fixes-2013-11-07' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Bit a bit -fixes pull request in the merge window than usual dua to two feauture-y things: - Display CRCs are now enabled on all platforms, including the odd DP case on gm45/vlv. Since this is a testing-only feature it should ever hurt, but I figured it'll help with regression-testing -fixes. So I left it in and didn't postpone it to 3.14. - Display power well refactoring from Imre. Would have caused major pain conflict with the bdw stage 1 patches if I'd postpone this to -next. It's only an relatively small interface rework, so shouldn't cause pain. It's also been in my tree since almost 3 weeks already. That accounts for about two thirds of the pull, otherwise just bugfixes: - vlv backlight fix from Jesse/Jani - vlv vblank timestamp fix from Jesse - improved edp detection through vbt from Ville (fixes a vlv issue) - eDP vdd fix from Paulo - fixes for dvo lvds on i830M - a few smaller things all over Note: This contains a backmerge of v3.12. Since the -internal branch always applied on top of -nightly I need that unified base to merge bdw patches. So you'll get a conflict with radeon connector props when pulling this (and nouveau/master will also conflict a bit when Ben doesn't rebase). The backmerge itself only had conflicts in drm/i915. There's also a tiny conflict between Jani's backlight fix and your sysfs lifetime fix in drm-next. * tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits) drm/i915/vlv: use per-pipe backlight controls v2 drm/i915: make backlight functions take a connector drm/i915: move opregion asle request handling to a work queue drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV drm/i915: Make intel_dp_is_edp() less specific drm/i915: Give names to the VBT child device type bits drm/i915/vlv: enable HDA display audio for Valleyview2 drm/i915/dvo: call ->mode_set callback only when the port is running drm/i915: avoid unclaimed registers when capturing the error state drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv drm/i915: scramble reset support for DP port CRC on vlv drm/i915: scramble reset support for DP port CRC on g4x drm/i916: add "auto" pipe CRC source ... Conflicts: MAINTAINERS drivers/gpu/drm/i915/intel_panel.c drivers/gpu/drm/nouveau/core/subdev/mc/base.c drivers/gpu/drm/radeon/atombios_encoders.c drivers/gpu/drm/radeon/radeon_connectors.c
2013-11-01drm/radeon: add a connector property for ditherAlex Deucher
Allows you to enable dither in the display hardware when the monitor supports lower a lower bpc than the current framebuffer format. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01drm/radeon: Add support for programming the FMT blocksAlex Deucher
The FMT blocks control how data is sent from the backend of the display pipe to to monitor. Proper set up of the FMT blocks are required for 30bpp formats. Additionally, dithering can be enabled on for better display with 18 and 24bpp displays. The exception is LVDS/eDP which atom takes care of in the SelectCRTC_Source table. For now just enable truncation until we test dithering more. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-18drm/radeon: make missing smc ucode non-fatal (r7xx-SI)Alex Deucher
Prevent driver load problems if the smc is missing. bug: https://bugzilla.kernel.org/show_bug.cgi?id=63011 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: stable@vger.kernel.org
2013-09-11drm/radeon/r6xx: add a stubbed out set_uvd_clocks callbackAlex Deucher
Certain r6xx boards use the same power state for both UVD and other things. Since we don't support UVD on r6xx boards at the moment, there was no callback installed for setting the UVD clocks, however, on systems that use the same power state, this leads to a NULL pointer dereference. Fill in a stubbed out implementation for now to avoid the crash. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66963 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: "3.11" <stable@vger.kernel.org>
2013-09-11drm/radeon: add spinlocks for indirect register accesssAlex Deucher
This adds spinlocks to protect access to other indirect register apertures. These indirect spaces are used pretty infrequently and we haven't had an reported problems, but better safe than sorry. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-09-02Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Alex writes: This is the radeon drm-next request. Big changes include: - support for dpm on CIK parts - support for ASPM on CIK parts - support for berlin GPUs - major ring handling cleanup - remove the old 3D blit code for bo moves in favor of CP DMA or sDMA - lots of bug fixes [airlied: fix up a bunch of conflicts from drm_order removal] * 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits) drm/radeon/dpm: make sure dc performance level limits are valid (CI) drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2) drm/radeon: gcc fixes for extended dpm tables drm/radeon: gcc fixes for kb/kv dpm drm/radeon: gcc fixes for ci dpm drm/radeon: gcc fixes for si dpm drm/radeon: gcc fixes for ni dpm drm/radeon: gcc fixes for trinity dpm drm/radeon: gcc fixes for sumo dpm drm/radeonn: gcc fixes for rv7xx/eg/btc dpm drm/radeon: gcc fixes for rv6xx dpm drm/radeon: gcc fixes for radeon_atombios.c drm/radeon: enable UVD interrupts on CIK drm/radeon: fix init ordering for r600+ drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume radeon kms: fix uninitialised hotplug work usage in r100_irq_process() drm/radeon/audio: set up the sads on DCE3.2 asics drm/radeon: fix handling of variable sized arrays for router objects ... Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/i915_gem_dmabuf.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/radeon/cik.c drivers/gpu/drm/radeon/ni.c drivers/gpu/drm/radeon/r600.c
2013-08-30drm/radeon: fix init ordering for r600+Alex Deucher
The vram scratch buffer needs to be initialized before the mc is programmed otherwise we program 0 as the GPU address of the default GPU fault page. In most cases we put vram at zero anyway and reserve a page for the legacy vga buffer so in practice this shouldn't cause any problems, but better to make it correct. Was changed in: 6fab3febf6d949b0a12b1e4e73db38e4a177a79e Reported-by: FrankR Huang <FrankR.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon: separate DMA codeChristian König
Similar to separating the UVD code, just put the DMA functions into separate files. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: separate UVD code v3Christian König
Our different hardware blocks are actually completely separated, so it doesn't make much sense any more to structure the code by pure chipset generations. Start restructuring the code by separating our the UVD block. v2: updated commit message v3: rebased and restructurized start/stop functions for kv dpm. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: remove special handling for the DMA ringChristian König
Now that we have callbacks for [rw]ptr handling we can remove the special handling for the DMA rings and use the callbacks instead. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: rework UVD writeback & [rw]ptr handlingChristian König
The hardware just doesn't support this correctly. Disable it before we accidentally write anywhere we shouldn't. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: restructure UVD code to handle UVD PG (v2)Alex Deucher
When we PG (powergate) UVD, we need to re-initialize it before we can use it again. v2: rebase on UVD stop fixes Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/kms: remove r6xx+ blit copy routinesAlex Deucher
No longer used now that we use the async dma engines or CP DMA for bo copies. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-19Merge remote-tracking branch 'pfdo/drm-rcar-for-v3.12' into drm-nextDave Airlie
Merge the rcar stable branch that is being shared with the arm-soc tree. Signed-off-by: Dave Airlie <airlied@redhat.com> * pfdo/drm-rcar-for-v3.12: (220 commits) drm/rcar-du: Add FBDEV emulation support drm/rcar-du: Add internal LVDS encoder support drm/rcar-du: Configure RGB output routing to DPAD0 drm/rcar-du: Rework output routing support drm/rcar-du: Add support for DEFR8 register drm/rcar-du: Add support for multiple groups drm/rcar-du: Fix buffer pitch alignment for R8A7790 DU drm/rcar-du: Add support for the R8A7790 DU drm/rcar-du: Move output routing configuration to group drm/rcar-du: Remove register definitions for the second channel drm/rcar-du: Use dynamic number of CRTCs instead of CRTCs array size drm/rcar-du: Introduce CRTCs groups drm/rcar-du: Rename rcar_du_plane_(init|register) to rcar_du_planes_* drm/rcar-du: Create rcar_du_planes structure drm/rcar-du: Rename platform data fields to match what they describe drm/rcar-du: Merge LVDS and VGA encoder code drm/rcar-du: Split VGA encoder and connector drm/rcar-du: Split LVDS encoder and connector drm/rcar-du: Clarify comment regarding plane Y source coordinate drm/rcar-du: Support per-CRTC clock and IRQ ... Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/qxl/qxl_release.c
2013-08-07drm/radeon: make missing smc ucode non-fatalAlex Deucher
The smc ucode is required for dpm (dynamic power management), but if it's missing just skip dpm setup and don't disable acceleration. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=67876 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: always program the MC on startupAlex Deucher
For r6xx+ asics. This mirrors the behavior of pre-r6xx asics. We need to program the MC even if something else in startup() fails. Failure to do so results in an unusable GPU. Based on a fix from: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-07drm/radeon: fix halting UVDChristian König
Removing the clock/power or resetting the VCPU can cause hangs if that happens in the middle of a register write. Stall the memory and register bus before putting the VCPU into reset. Keep it in reset when unloading the module or suspending. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-23drm/radeon: s/drm_order/order_base_2/Daniel Vetter
Last driver and pretty obviously a major user of this little function. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-22drm/radeon: wait for 3D idle before using CP DMAAlex Deucher
Make sure the 3D engine is idle before using CP DMA for bo copies. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Marek Olšák <maraeo@gmail.com>
2013-07-14drm/radeon: fix UVD fence emitChristian König
Currently doesn't matter cause we allocate the fence in the lower 265MB anyway. Reported-by: Frank Huang <FrankR.Huang@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-07-14drm/radeon: use radeon device for request firmwareJerome Glisse
Avoid creating temporary platform device that will lead to issue when several radeon gpu are in same computer. Instead directly use the radeon device for requesting firmware. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-14drm/radeon: implement bo copy callback using CP DMA (v2)Alex Deucher
Lighter weight than using the 3D engine. v2: fix ring count Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for evergreen (v4)Alex Deucher
This adds dpm support for evergreen asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching (requires additional acpi support) Set radeon.dpm=1 to enable. v2: reduce stack usage, rename ulv struct v3: fix thermal interrupt check notices by Jerome v4: fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for rv7xx (v4)Alex Deucher
This adds dpm support for rv7xx asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching Set radeon.dpm=1 to enable. v2: reduce stack usage v3: fix 64 bit div v4: fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for rv6xx (v3)Alex Deucher
This adds dpm support for rv6xx asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching Set radeon.dpm=1 to enable. v2: remove duplicate line v3: fix thermal interrupt check noticed by Jerome Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-06-27drm/radeon: properly set up the RLC on ON/LN/TN (v3)Alex Deucher
This is required for certain advanced functionality. v2: save/restore list takes dword offsets v3: rebase on gpu reset changes Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: move ucode defines to a separate headerAlex Deucher
Avoids confusion and duplication. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-12drm/radeon: fix UVD on big endianAlex Deucher
This fixes the kernel side so that the ring should come up and ring and IB tests should work. The userspace UVD drivers will also need big endian fixes. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-03drm/radeon: Use direct mapping for fast fb access on RS780/RS880 (v2)Samuel Li
v2: fix trailing whitespace Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-03radeon: Fix system hang issue when using KMS with older cardsAdis Hamzić
The current radeon driver initialization routines, when using KMS, are written so that the IRQ installation routine is called before initializing the WB buffer and the CP rings. With some ASICs, though, the IRQ routine tries to access the GFX_INDEX ring causing a call to RREG32 with the value of -1 in radeon_fence_read. This, in turn causes the system to completely hang with some cards, requiring a hard reset. A call stack that can cause such a hang looks like this (using rv515 ASIC for the example here): * rv515_init (rv515.c) * radeon_irq_kms_init (radeon_irq_kms.c) * drm_irq_install (drm_irq.c) * radeon_driver_irq_preinstall_kms (radeon_irq_kms.c) * rs600_irq_process (rs600.c) * radeon_fence_process - due to SW interrupt (radeon_fence.c) * radeon_fence_read (radeon_fence.c) * hang due to RREG32(-1) The patch moves the IRQ installation to the card startup routine, after the ring has been initialized, but before the IRQ has been set. This fixes the issue, but requires a check to see if the IRQ is already installed, as is the case in the system resume codepath. I have tested the patch on three machines using the rv515, the rv770 and the evergreen ASIC. They worked without issues. This seems to be a known issue and has been reported on several bug tracking sites by various distributions (see links below). Most of reports recommend booting the system with KMS disabled and then enabling KMS by reloading the radeon module. For some reason, this was indeed a usable workaround, however, UMS is now deprecated and disabled by default. Bug reports: https://bugzilla.redhat.com/show_bug.cgi?id=845745 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/561789 https://bbs.archlinux.org/viewtopic.php?id=156964 Signed-off-by: Adis Hamzić <adis@hamzadis.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-05-29radeon: use max_bus_speed to activate gen2 speedsKleber Sacilotto de Souza
radeon currently uses a drm function to get the speed capabilities for the bus, drm_pcie_get_speed_cap_mask. However, this is a non-standard method of performing this detection and this patch changes it to use the max_bus_speed attribute. From: Lucas Kannebley Tavares <lucaskt@linux.vnet.ibm.com> Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-23drm/radeon: disable UVD advanced semaphore modeChristian König
Not needed and seems to cause some problems. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-23drm/radeon: raise UVD clocks on init v3Christian König
v2: not only raise the clocks on VCPU boot, but also on IB test. v3: agd5f: fix r600_uvd_init return value. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63730 Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-09drm/radeon: update r600 set/get pcie lane configAlex Deucher
Updated to the preferred programming sequence. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-09drm/radeon/kms: replace *REG32_PCIE_P with *REG32_PCIE_PORTAlex Deucher
Avoid confusion with the *REG32_P mask macro. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-09drm/radeon: UVD bringup v8Christian König
Just everything needed to decode videos using UVD. v6: just all the bugfixes and support for R7xx-SI merged in one patch v7: UVD_CGC_GATE is a write only register, lockup detection fix v8: split out VRAM fallback changes, remove support for RV770, add support for HEMLOCK, add buffer sizes checks Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>