summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2018-02-27gpio: Handle deferred probing in of_find_gpio() properlyChen-Yu Tsai
of_get_named_gpiod_flags() used directly in of_find_gpio() or indirectly through of_find_spi_gpio() or of_find_regulator_gpio() can return -EPROBE_DEFER. This gets overwritten by the subsequent of_find_*_gpio() calls. This patch fixes this by trying of_find_spi_gpio() or of_find_regulator_gpio() only if deferred probing was not requested by the previous of_get_named_gpiod_flags() call. Fixes: 6a537d48461d ("gpio: of: Support regulator nonstandard GPIO properties") Fixes: c85823390215 ("gpio: of: Support SPI nonstandard GPIO properties") Signed-off-by: Chen-Yu Tsai <wens@csie.org> [Augmented to fit with Maxime's patch] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-27gpiolib: Keep returning EPROBE_DEFER when we shouldMaxime Ripard
Commits c85823390215 ("gpio: of: Support SPI nonstandard GPIO properties") and 6a537d48461d ("gpio: of: Support regulator nonstandard GPIO properties") have introduced a regression in the way error codes from of_get_named_gpiod_flags are handled. Previously, those errors codes were returned immediately, but the two commits mentioned above are now overwriting the error pointer, meaning that whatever value has been returned will be dropped in favor of whatever the two new functions will return. This might not be a big deal except for EPROBE_DEFER, on which GPIOlib customers will depend on, and that will now be returned as an hard error which means that they will not probe anymore, instead of gently deferring their probe. Since EPROBE_DEFER basically means that we have found a valid property but there was no GPIO controller registered to handle it, fix this issues by returning it as soon as we encounter it. Fixes: c85823390215 ("gpio: of: Support SPI nonstandard GPIO properties") Fixes: 6a537d48461d ("gpio: of: Support regulator nonstandard GPIO properties") Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [Fold in fix to the fix] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-02Merge tag 'pinctrl-v4.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.16 kernel cycle. Like with GPIO it is actually a bit calm this time. Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes" * tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits) pinctrl: mcp23s08: fix irq setup order pinctrl: Forward declare struct device pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding pinctrl: stm32: add STM32F769 MCU support pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping pinctrl: sx150x: Register pinctrl before adding the gpiochip pinctrl: sx150x: Unregister the pinctrl on release pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show() pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call pinctrl: mediatek: mt7622: fix potential uninitialized value being returned pinctrl: uniphier: refactor drive strength get/set functions pinctrl: imx7ulp: constify struct imx_cfg_params_decode pinctrl: imx: constify struct imx_pinctrl_soc_info pinctrl: imx7d: simplify imx7d_pinctrl_probe pinctrl: imx: use struct imx_pinctrl_soc_info as a const pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly. pinctrl: qcom: Add msm8998 pinctrl driver ...
2018-01-31Merge tag 'gpio-v4.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "The is the bulk of GPIO changes for the v4.16 kernel cycle. It is pretty calm this time around I think. I even got time to get to things like starting to clean up header includes. Core changes: - Disallow open drain and open source flags to be set simultaneously. This doesn't make electrical sense, and would the hardware actually respond to this setting, the result would be short circuit. - ACPI GPIO has a new core infrastructure for handling quirks. The quirks are there to deal with broken ACPI tables centrally instead of pushing the work to individual drivers. In the world of BIOS writers, the ACPI tables are perfect. Until they find a mistake in it. When such a mistake is found, we can patch it with a quirk. It should never happen, the problem is that it happens. So we accomodate for it. - Several documentation updates. - Revert the patch setting up initial direction state from reading the device. This was causing bad things for drivers that can't read status on all its pins. It is only affecting debugfs information quality. - Label descriptors with the device name if no explicit label is passed in. - Pave the ground for transitioning SPI and regulators to use GPIO descriptors by implementing some quirks in the device tree GPIO parsing code. New drivers: - New driver for the Access PCIe IDIO 24 family. Other: - Major refactorings and improvements to the GPIO mockup driver used for test and verification. - Moved the AXP209 driver over to pin control since it gained a pin control back-end. These patches will appear (with the same hashes) in the pin control pull request as well. - Convert the onewire GPIO driver w1-gpio to use descriptors. This is merged here since the W1 maintainers send very few pull requests and he ACKed it. - Start to clean up driver headers using <linux/gpio.h> to just use <linux/gpio/driver.h> as appropriate" * tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (103 commits) gpio: Timestamp events in hardirq handler gpio: Fix kernel stack leak to userspace gpio: Fix a documentation spelling mistake gpio: Documentation update gpiolib: remove redundant initialization of pointer desc gpio: of: Fix NPE from OF flags gpio: stmpe: Delete an unnecessary variable initialisation in stmpe_gpio_probe() gpio: stmpe: Move an assignment in stmpe_gpio_probe() gpio: stmpe: Improve a size determination in stmpe_gpio_probe() gpio: stmpe: Use seq_putc() in stmpe_dbg_show() gpio: No NULL owner gpio: stmpe: i2c transfer are forbiden in atomic context gpio: davinci: Include proper header gpio: da905x: Include proper header gpio: cs5535: Include proper header gpio: crystalcove: Include proper header gpio: bt8xx: Include proper header gpio: bcm-kona: Include proper header gpio: arizona: Include proper header gpio: amd8111: Include proper header ...
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-29Merge tag 'sound-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The major changes in the core API side in this cycle are the still on-going ASoC componentization works. Other than that, only few small changes such as 20bit PCM format support are found. Meanwhile the rest majority of changes are for ASoC drivers: - Large cleanups of some of the TI CODEC drivers - Continued work on Intel ASoC stuff for new quirks, ACPI GPIO handling, Kconfigs and lots of cleanups - Refactoring of the Freescale SSI driver, as preliminary work for the upcoming changes - Work on ST DFSDM driver, including the required IIO patches - New drivers for Allwinner A83T, Maxim MAX89373, SocioNext UiniPhier EVEA Tempo Semiconductor TSCS42xx and TI PCM816x, TAS5722 and TAS6424 devices - Removal of dead codes for SN95031 and board drivers Last but not least, a few HD-audio and USB-audio quirks are included as usual, too" * tag 'sound-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (303 commits) ALSA: hda - Reduce the suspend time consumption for ALC256 ASoC: use seq_file to dump the contents of dai_list,platform_list and codec_list ASoC: soc-core: add missing EXPORT_SYMBOL_GPL() for snd_soc_rtdcom_lookup IIO: ADC: stm32-dfsdm: remove unused variable again ASoC: bcm2835: fix hw_params error when device is in prepared state ASoC: mxs-sgtl5000: Do not print error on probe deferral ASoC: sgtl5000: Do not print error on probe deferral ASoC: Intel: remove select on non-existing SND_SOC_INTEL_COMMON ALSA: usb-audio: Support changing input on Sound Blaster E1 ASoC: Intel: remove second duplicated assignment to pointer 'res' ALSA: hda/realtek - update ALC215 depop optimize ALSA: hda/realtek - Support headset mode for ALC215/ALC285/ALC289 ALSA: pcm: Fix trailing semicolon ASoC: add Component level .read/.write ASoC: cx20442: fix regression by adding back .read/.write ASoC: uda1380: fix regression by adding back .read/.write ASoC: tlv320dac33: fix regression by adding back .read/.write ALSA: hda - Use IS_REACHABLE() for dependency on input IIO: ADC: stm32-dfsdm: fix static check warning IIO: ADC: stm32-dfsdm: code optimization ...
2018-01-23gpio: Timestamp events in hardirq handlerLinus Walleij
Add a hardirq handler to the GPIO userspace event loop, making sure to pick up the timestamp there, as close as possible in time relative to the actual event causing the interrupt. Tested with a simple pushbutton GPIO on ux500 and seems to work fine. Cc: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Reported-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-23gpio: Fix kernel stack leak to userspaceLinus Walleij
The GPIO event descriptor was leaking kernel stack to userspace because we don't zero the variable before use. Ooops. Fix this. Cc: stable@vger.kernel.org Reported-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-19Merge branch 'gpio-drivers-only-driver-h' into develLinus Walleij
2018-01-18Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown
2018-01-17gpiolib: remove redundant initialization of pointer descColin Ian King
The initialized value stored in pointer desc is never read as it is updated in the first executable statement in the function. This is therefore redundant and can be removed. Cleans up clang warning: drivers/gpio/gpiolib.c:3710:20: warning: Value stored to 'desc' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17gpio: of: Fix NPE from OF flagsLinus Walleij
Some calls to of_get_named_gpio() calls sets the flags argument to NULL because they are not interested in the flags. This caused a null pointer exception since we were unconditionally using these flags. Fix it. Fixes: 6a537d48461d ("gpio: of: Support regulator nonstandard GPIO properties") Cc: Heiner Kallweit <hkallweit1@gmail.com> Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17gpio: stmpe: Delete an unnecessary variable initialisation in stmpe_gpio_probe()Markus Elfring
The local variable "irq" will eventually be set to an appropriate value a bit later. Thus omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17gpio: stmpe: Move an assignment in stmpe_gpio_probe()Markus Elfring
Move the assignment for the local variable "irq" so that its setting will only be performed directly before it is checked by this function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17gpio: stmpe: Improve a size determination in stmpe_gpio_probe()Markus Elfring
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17gpio: stmpe: Use seq_putc() in stmpe_dbg_show()Markus Elfring
A single character (line break) should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17gpio: No NULL ownerLinus Walleij
Sometimes a GPIO is fetched with NULL as parent device, and that is just fine. So under these circumstances, avoid using dev_name() to provide a name for the GPIO line. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17gpio: stmpe: i2c transfer are forbiden in atomic contextPatrice Chotard
Move the workaround from stmpe_gpio_irq_unmask() which is executed in atomic context to stmpe_gpio_irq_sync_unlock() which is not. It fixes the following issue: [ 1.500000] BUG: scheduling while atomic: swapper/1/0x00000002 [ 1.500000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.0-rc2-00020-gbd4301f-dirty #28 [ 1.520000] Hardware name: STM32 (Device Tree Support) [ 1.520000] [<0000bfc9>] (unwind_backtrace) from [<0000b347>] (show_stack+0xb/0xc) [ 1.530000] [<0000b347>] (show_stack) from [<0001fc49>] (__schedule_bug+0x39/0x58) [ 1.530000] [<0001fc49>] (__schedule_bug) from [<00168211>] (__schedule+0x23/0x2b2) [ 1.550000] [<00168211>] (__schedule) from [<001684f7>] (schedule+0x57/0x64) [ 1.550000] [<001684f7>] (schedule) from [<0016a513>] (schedule_timeout+0x137/0x164) [ 1.550000] [<0016a513>] (schedule_timeout) from [<00168b91>] (wait_for_common+0x8d/0xfc) [ 1.570000] [<00168b91>] (wait_for_common) from [<00139753>] (stm32f4_i2c_xfer+0xe9/0xfe) [ 1.580000] [<00139753>] (stm32f4_i2c_xfer) from [<00138545>] (__i2c_transfer+0x111/0x148) [ 1.590000] [<00138545>] (__i2c_transfer) from [<001385cf>] (i2c_transfer+0x53/0x70) [ 1.590000] [<001385cf>] (i2c_transfer) from [<001388a5>] (i2c_smbus_xfer+0x12f/0x36e) [ 1.600000] [<001388a5>] (i2c_smbus_xfer) from [<00138b49>] (i2c_smbus_read_byte_data+0x1f/0x2a) [ 1.610000] [<00138b49>] (i2c_smbus_read_byte_data) from [<00124fdd>] (__stmpe_reg_read+0xd/0x24) [ 1.620000] [<00124fdd>] (__stmpe_reg_read) from [<001252b3>] (stmpe_reg_read+0x19/0x24) [ 1.630000] [<001252b3>] (stmpe_reg_read) from [<0002c4d1>] (unmask_irq+0x17/0x22) [ 1.640000] [<0002c4d1>] (unmask_irq) from [<0002c57f>] (irq_startup+0x6f/0x78) [ 1.650000] [<0002c57f>] (irq_startup) from [<0002b7a1>] (__setup_irq+0x319/0x47c) [ 1.650000] [<0002b7a1>] (__setup_irq) from [<0002bad3>] (request_threaded_irq+0x6b/0xe8) [ 1.660000] [<0002bad3>] (request_threaded_irq) from [<0002d0b9>] (devm_request_threaded_irq+0x3b/0x6a) [ 1.670000] [<0002d0b9>] (devm_request_threaded_irq) from [<001446e7>] (mmc_gpiod_request_cd_irq+0x49/0x8a) [ 1.680000] [<001446e7>] (mmc_gpiod_request_cd_irq) from [<0013d45d>] (mmc_start_host+0x49/0x60) [ 1.690000] [<0013d45d>] (mmc_start_host) from [<0013e40b>] (mmc_add_host+0x3b/0x54) [ 1.700000] [<0013e40b>] (mmc_add_host) from [<00148119>] (mmci_probe+0x4d1/0x60c) [ 1.710000] [<00148119>] (mmci_probe) from [<000f903b>] (amba_probe+0x7b/0xbe) [ 1.720000] [<000f903b>] (amba_probe) from [<001170e5>] (driver_probe_device+0x169/0x1f8) [ 1.730000] [<001170e5>] (driver_probe_device) from [<001171b7>] (__driver_attach+0x43/0x5c) [ 1.740000] [<001171b7>] (__driver_attach) from [<0011618d>] (bus_for_each_dev+0x3d/0x46) [ 1.740000] [<0011618d>] (bus_for_each_dev) from [<001165cd>] (bus_add_driver+0xcd/0x124) [ 1.740000] [<001165cd>] (bus_add_driver) from [<00117713>] (driver_register+0x4d/0x7a) [ 1.760000] [<00117713>] (driver_register) from [<001fc765>] (do_one_initcall+0xbd/0xe8) [ 1.770000] [<001fc765>] (do_one_initcall) from [<001fc88b>] (kernel_init_freeable+0xfb/0x134) [ 1.780000] [<001fc88b>] (kernel_init_freeable) from [<00167ee3>] (kernel_init+0x7/0x9c) [ 1.790000] [<00167ee3>] (kernel_init) from [<00009b65>] (ret_from_fork+0x11/0x2c) Cc: stable@vger.kernel.org Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-16gpio: mmio: Also read bits that are zeroLinus Walleij
The code for .get_multiple() has bugs: 1. The simple .get_multiple() just reads a register, masks it and sets the return value. This is not correct: we only want to assign values (whether 0 or 1) to the bits that are set in the mask. Fix this by using &= ~mask to clear all bits in the mask and then |= val & mask to set the corresponding bits from the read. 2. The bgpio_get_multiple_be() call has a similar problem: it uses the |= operator to set the bits, so only the bits in the mask are affected, but it misses to clear all returned bits from the mask initially, so some bits will be returned erroneously set to 1. 3. The bgpio_get_set_multiple() again fails to clear the bits from the mask. 4. find_next_bit() wasn't handled correctly, use a totally different approach for one function and change the other function to follow the design pattern of assigning the first bit to -1, then use bit + 1 in the for loop and < num_iterations as break condition. Fixes: 80057cb417b2 ("gpio-mmio: Use the new .get_multiple() callback") Cc: Bartosz Golaszewski <brgl@bgdev.pl> Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com> Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reported-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-14gpio: davinci: Include proper headerLinus Walleij
This driver has no business including <linux/gpio.h>, it is a driver so include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-14gpio: da905x: Include proper headerLinus Walleij
These drivers has no business including <linux/gpio.h>, they are drivers so include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-14gpio: cs5535: Include proper headerLinus Walleij
This driver has no business including <linux/gpio.h>, it is a driver so include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-14gpio: crystalcove: Include proper headerLinus Walleij
This driver has no business including <linux/gpio.h>, it is a driver so include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-13gpio: bt8xx: Include proper headerLinus Walleij
This driver has no business including <linux/gpio.h>, it is a driver so include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-13gpio: bcm-kona: Include proper headerLinus Walleij
This driver has no business including <linux/gpio.h>, it is a driver so include <linux/gpio/driver.h>. GPIOF_DIR_IN/GPIOF_DIR_OUT are for consumers and should not be used in drivers to use just 1/0 instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-13gpio: arizona: Include proper headerLinus Walleij
This driver has no business including <linux/gpio.h>, it is a driver so include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-13gpio: amd8111: Include proper headerLinus Walleij
This driver has no business including <linux/gpio.h>, it is a driver so include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-13gpio: altera: Include GPIO driver headerLinus Walleij
This is a GPIO driver so it should definately include <linux/gpio/driver.h>. We want to get rid of <linux/of_gpio.h> but that will take a bit longer. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-13gpio: adp5588: Include proper headerLinus Walleij
This driver has no business including <linux/gpio.h>, it is a driver so include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-13gpio: adp5520: Include proper headerLinus Walleij
This driver has no business including <linux/gpio.h>, it is a driver so include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-13gpio: 74x174: Include proper headersLinus Walleij
This driver has no business including <linux/gpio.h> or <linux/of_gpio.h>. Cut them and include <linux/gpio/driver.h> and <linux/gpio/consumer.h> which is it they really needs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-12gpio: of: Add special quirk to parse regulator flagsLinus Walleij
While most GPIOs are indicated to be active low or open drain using their twocell flags, we have legacy regulator bindings to take into account. Add a quirk respecting the special boolean active-high and open drain flags when parsing regulator nodes for GPIOs. This makes it possible to get rid of duplicated inversion semantics handling in the regulator core and any regulator drivers parsing and handling this separately. Unfortunately the old regulator inversion semantics are specified such that the presence or absence of "enable-active-high" solely controls the semantics, so we cannot deprecate this in favor of the phandle-provided inversion flag, instead any such phandle inversion flag provided in the second cell of a GPIO handle must be actively ignored, so we print a warning to contain the situation and make things easy for the users. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-12gpio: Export devm_gpiod_get_from_of_node() for consumersLinus Walleij
We have been holding back on adding an API for fetching GPIO handles directly from device nodes, strongly preferring to get it from the spawn devices instead. The fwnode interface however already contains an API for doing this, as it is used for opaque device tree nodes or ACPI nodes for getting handles to LEDs and keys that use GPIO: those are specified as one child per LED/key in the device tree and are not individual devices. However regulators present a special problem as they already have helper functions to traverse the device tree from a regulator node and two levels down to fill in data, and as it already traverses GPIO nodes in its own way, and already holds a pointer to each regulators device tree node, it makes most sense to export an API to fetch the GPIO descriptor directly from the node. We only support the devm_* version for now, hopefully no non-devres version will be needed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-12gpio: Break out code to get a descriptor from a DT nodeLinus Walleij
Sometimes a GPIO needs to be taken from a node without a device associated with it. The fwnode accessor does this, let's however break out the DT code for now. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-12gpio: of: Support regulator nonstandard GPIO propertiesLinus Walleij
Before it was clearly established that all GPIO properties in the device tree shall be named "foo-gpios" (with the deprecated variant "foo-gpio" for single lines) we unfortunately merged a few bindings for regulators with random phandle names. As we want to switch the GPIO regulator driver to using descriptors, we need devm_gpiod_get() to return something reasonable when looking up these in the device tree. Put in a special #ifdef:ed kludge to do this special lookup only for the regulator case and gets compiled out if we're not enabling regulators. Supply a whitelist with properties we accept. Cc: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-11gpio: thunderx: fix error return code in thunderx_gpio_probe()Wei Yongjun
Fix to return error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: 5a2a30024d8c ("gpio: Add gpio driver support for ThunderX and OCTEON-TX") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-11gpio: winbond: fix ISA_BUS_API dependencyArnd Bergmann
The newly added GPIO driver for winbond chipsets causes a circular dependency warning in Kconfig: drivers/gpio/Kconfig:13:error: recursive dependency detected! drivers/gpio/Kconfig:13: symbol GPIOLIB is selected by STX104 drivers/iio/adc/Kconfig:699: symbol STX104 depends on ISA_BUS_API arch/Kconfig:830: symbol ISA_BUS_API is selected by GPIO_WINBOND drivers/gpio/Kconfig:701: symbol GPIO_WINBOND depends on GPIOLIB The underlying problem is that ISA_BUS_API is not meant to be selected by device drivers, instead it is provided by the architectures that support ISA add-on card devices, or in case of x86 have this explicitly enabled. This particular driver appears to be different from the other ISA_BUS_API based drivers, in that it is not normally an add-on card (ISA or PC104) but instead is an LPC-attached component on the mainboard. We already support other functionality provided by this chip, at least drivers/watchdog/w83627hf_wdt.c and drivers/hwmon/w83627ehf.c, plus there is a discovery function for this hardware in drivers/parport/parport_pc.c. If we want to use this driver without having to enable CONFIG_EXPERT, it might be better to not use the isa_bus_type for it, but rather turn it into a platform_driver, acpi_driver or add an MFD for it that is shared with the wdt and hwmon portions and does the probing. For now, this patch fixes the dependency by changing 'select' into 'depends on'. Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: a0d65009411c ("gpio: winbond: Add driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-10gpio: Add GPIO support for the ACCES PCIe-IDIO-24 familyWilliam Breathitt Gray
The ACCES PCIe-IDIO-24 device provides 56 lines of digital I/O (24 lines of optically-isolated non-polarized digital inputs for AC and DC control signals, 24 lines of isolated solid state FET digital outputs, and 8 non-isolated TTL/CMOS compatible programmable I/O). An interrupt is generated when any of the inputs change state (low to high or high to low). Input filter control is not supported by this driver, and input filters are deactivated by this driver. These devices are capable of get_multiple and set_multiple functionality, but these functions have not yet been implemented for this driver. Change-Of-State (COS) detection functionality may be configured to fire interrupts on exclusively rising/falling edges, but this driver currently only implements COS detection for either both edges or none. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-10gpiolib: Export gpiochip_irqchip_irq_valid() to driversStephen Boyd
Some pinctrl drivers can use the gpiochip irq valid information to figure out if certain gpios are exposed to the kernel for usage or not. Expose this API so we can use it in the pinmux_ops::request ops. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-10gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()Geert Uytterhoeven
Since commit f11a04464ae57e8d ("i2c: gpio: Enable working over slow can_sleep GPIOs"), probing the i2c RTC connected to an i2c-gpio bus on r8a7740/armadillo fails with: rtc-s35390a 0-0030: error resetting chip rtc-s35390a: probe of 0-0030 failed with error -5 More debug code reveals: i2c i2c-0: master_xfer[0] R, addr=0x30, len=1 i2c i2c-0: NAK from device addr 0x30 msg #0 s35390a_get_reg: ret = -6 Commit 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to actually be raw") moved open drain/source handling from gpiod_set_raw_value_commit() to gpiod_set_value(), but forgot to take into account that gpiod_set_value_cansleep() also needs this handling. The i2c protocol mandates that i2c signals are open drain, hence i2c communication fails. Fix this by adding the missing handling to gpiod_set_value_cansleep(), using a new common helper gpiod_set_value_nocheck(). Fixes: 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to actually be raw") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [removed underscore syntax, added kerneldoc] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-10gpio: merrifield: Add support of ACPI enabled platformsAndy Shevchenko
The driver needs the pin control device name for ACPI. We are looking through ACPI namespace and return first found device based on ACPI HID for Intel Merrifield FLIS (pin control device). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-09gpio: correct docs about return value of gpiod_get_directionWolfram Sang
The use of the GPIOF_* flags is deprecated, so don't advertise them here. Document the plain numbers for now until we have a better solution. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-09gpio: winbond: Add driverMaciej S. Szmigiero
This commit adds GPIO driver for Winbond Super I/Os. Currently, only W83627UHG model (also known as Nuvoton NCT6627UD) is supported but in the future a support for other Winbond models, too, can be added to the driver. A module parameter "gpios" sets a bitmask of GPIO ports to enable (bit 0 is GPIO1, bit 1 is GPIO2, etc.). One should be careful which ports one tinkers with since some might be managed by the firmware (for functions like powering on and off, sleeping, BIOS recovery, etc.) and some of GPIO port pins are physically shared with other devices included in the Super I/O chip. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-08gpio: of: Support SPI nonstandard GPIO propertiesLinus Walleij
Before it was clearly established that all GPIO properties in the device tree shall be named "foo-gpios" (with the deprecated variant "foo-gpio" for single lines) we unfortunately merged a few bindings which named the lines "gpio-foo" instead. This is most prominent in the GPIO SPI driver in Linux which names the lines "gpio-sck", "gpio-mosi" and "gpio-miso". As we want to switch the GPIO SPI driver to using descriptors, we need devm_gpiod_get() to return something reasonable when looking up these in the device tree. Put in a special #ifdef:ed kludge to do this special lookup only for the SPI case and gets compiled out if we're not enabling SPI. If we have more oddly defined legacy GPIOs like this, they can be handled in a similar manner. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-05gpio: label descriptors using the device nameLinus Walleij
Some GPIO lines appear named "?" in the lsgpio dump due to their requesting drivers not passing a reasonable label. Most typically this happens if a device tree node just defines gpios = <...> and not foo-gpios = <...>, the former gets named "foo" and the latter gets named "?". However the struct device passed in is always valid so let's just label the GPIO with dev_name() on the device if no proper label was passed. Cc: Reported-by: Jason Kridner <jkridner@beagleboard.org> Reported-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03gpio: omap: Give unique labels to each GPIO bank/chipLinus Walleij
As we need to add GPIO lookup tables to the OMAP platforms, we need to reference each GPIO chip with a unique label. Use the GPIO base to name each chip, "gpio-0-31", "gpio-32-63" etc. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Kevin Hilman <khilman@kernel.org> Cc: linux-omap@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-02gpiolib: add desc validation to gpiod_set_transitory()Vladimir Zapolskiy
The gpiod_set_transitory() function is publicly exported, and it is expected from it to be ready for usage with optional GPIOs on consumer's side. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-02gpiolib: remove a redundant check in gpiod_to_chip()Vladimir Zapolskiy
This non-functional change slightly simplifies the implementation of gpiod_to_chip() function. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-02gpiolib: don't dereference a desc before validationVladimir Zapolskiy
The fix restores a proper validation of an input gpio desc, which might be needed to deal with optional GPIOs correctly. Fixes: 02e479808b5d ("gpio: Alter semantics of *raw* operations to actually be raw") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>