summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-pxa.c
AgeCommit message (Collapse)Author
2016-01-05gpio: pxa: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Daniel Mack <zonque@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: pxa: checking IS_ERR() instead of NULLDan Carpenter
irq_domain_add_legacy() returns NULL on error, it doesn't return error pointers. Fixes: 384ca3c6a28d ('gpio: pxa: change the interrupt management') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-22gpio: pxa: fixes non devicetree buildsRobert Jarzmik
The commit "gpio: pxa: change the interrupt management" should have taken care of moving an ifdef to not englobe irqdomain related structures anymore, as they are used now for all builds. This repairs the broken builds where CONFIG_OF=n. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15gpio: pxa: add pin control gpio direction and requestRobert Jarzmik
If a pin control driver is available, use it to change the gpio direction. If not fallback to directly manipulating the gpio direction register. The reason to use the pin control driver first is that pin control in pxa2xx architecture implies changing the gpio direction, even for non gpio functions. In order to do it atomically, only one driver should control the gpio direction, and if a pin controller is available, it has to be him. There is a small catch : if CONFIG_PINCTRL is selected, then a pinctrl driver has to be probed. If not, gpio_request() will return -EPROBE_DEFER as pinctrl_request_gpio() returns it in that case. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-10gpio: pxa: change the interrupt managementRobert Jarzmik
The interrupt management is changed by this patch to rely on chip data instead of chained interrupts. The main goal is to loosen the dependency on the global pxa chip structure in favor of the passed chip data. The secondary goal is to better show in /proc/interrupts the difference between interrupts for gpio0 and gpio1 (directly wired to interrupt controller), and the other gpios (wired onto a third line in the interrupt controller). The last advantage of this patch is that the interrupt is actually requested, so that another driver cannot steal this line, or overwrite the handler. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-10gpio: pxa: convert to devm_ioremapRobert Jarzmik
Use the device managed ioremap to simplify the probe function. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-10gpio: pxa: convert to one gpiochipRobert Jarzmik
The pxa gpio IP is provided by one chip, which holds multiple banks. Another reason the driver should register only one gpiochip instead of multiple gpiochips (ie. 1 per each bank) is that for pincontrol and devicetree integration (think gpio-ranges), it's impossible to have the contiguous pin range 0..127 mapped to gpios 0..127. This patch, amongst other thinks, paves the path to loosen the bond with the global structure variable pxa_gpio_chip. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: pxa: change initcall level second attemptRobert Jarzmik
This patch is a second attempt at what was previously in commit 6c7e660a27da ("gpio: pxa: set initcall level to module init"). The goal is the same : enable gpio & pinctrl driver to work together. As pinctrl driver will be initialized at device level, the gpio should be as well, so that the deferring mechanism is honored. Yet this patch should also respect the legacy platforms, so the set of constraints is : - in legacy platforms (ie. non dt), gpio_[gs]et_*() should be available for machine code => core initcall - in new platforms (ie. dt based), pinctrl will be available and no machine code => device initcall In order to fullfill all these constraints, the initcall level is either postcore for non devicetree platforms, and device for devicetree platforms. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-07-28gpio: kill off set_irq_flags usageRob Herring
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed as most platforms don't use probing. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-tegra@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09gpio: pxa: simplify BANK_OFF macro offset calculationRob Herring
The macro BANK_OFF which calculates the base offset for each GPIO port. The macro is needlessly complex and unreadable. Simplify the calculation to a simple math operation. Signed-off-by: Rob Herring <robh@kernel.org> Cc: linux-gpio@vger.kernel.org Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-03gpio: pxa: add PXA1928 gpio type supportRob Herring
Add support for PXA1928 GPIOs. The PXA1928 adds a 6th bank from previous generations. Signed-off-by: Jing Xiang <jxiang@marvell.com> Signed-off-by: Xiangzhan Meng <mengxzh@marvell.com> [robh: ported to 3.19 from vendor kernel] Signed-off-by: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-03gpio: pxa: remove mach IRQ includesRob Herring
In preparation to enable ARCH_MMP on ARM64, the include of mach/irqs.h must be eliminated. mach/irqs.h was being included for IRQ_GPIO{0,1}, but these IRQs are always passed in as resources now. We can use irq0 and irq1 and get rid of IRQ_GPIOx. Get rid of the ifdef in the process as it is no longer needed. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-07gpio-pxa: gpio0 and gpio1 support on dtAndrew Ruder
pxa_gpio_probe() has some issues supporting the gpio0 and gpio1 interrupts under device-tree - it never actually sets up the chain handler to get interrupts on edge detect for GPIO0 and GPIO1. Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-19gpio: pxa: Make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15gpio: pxa: clamp gpio get value to [0,1]Neil Zhang
It would be convenient to normalize the return value for gpio_get. I have checked mach-mmp / mach-pxa / plat-pxa / plat-orion / mach-orion5x. It's OK for all of them to change this function to return 0 and 1. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-21gpio: pxa: remove dead codeDaniel Mack
Commit f87311743 ("ARM: mmp: add more compatible names in gpio driver") changed the driver logic to determine the number of available GPIOs from the compatible string, and hence obsoleted the (undocumented) child nodes that were previously necessary. However, it left some remainder which can be safely removed now. Also, this patch makes pxa_gpio_probe_dt() return the correct value in case irq_alloc_descs() fails. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-06Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull GPIO changes from Grant Likely: "The usual selection of bug fixes and driver updates for GPIO. Nothing really stands out except the addition of the GRGPIO driver and some enhacements to ACPI support" I'm pulling this despite the earlier mess. Let's hope it compiles these days. * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (46 commits) gpio: grgpio: Add irq support gpio: grgpio: Add device driver for GRGPIO cores gpiolib-acpi: introduce acpi_get_gpio_by_index() helper GPIO: gpio-generic: remove kfree() from bgpio_remove call gpio / ACPI: Handle ACPI events in accordance with the spec gpio: lpc32xx: Fix off-by-one valid range checking for bank gpio: mcp23s08: convert driver to DT gpio/omap: force restore if context loss is not detectable gpio/omap: optimise interrupt service routine gpio/omap: remove extra context restores in *_runtime_resume() gpio/omap: free irq domain in probe() failure paths gpio: gpio-generic: Add 16 and 32 bit big endian byte order support gpio: samsung: Add terminating entry for exynos_pinctrl_ids gpio: mvebu: add dbg_show function MAX7301 GPIO: Do not force SPI speed when using OF Platform gpio: gpio-tps65910.c: fix checkpatch error gpio: gpio-timberdale.c: fix checkpatch error gpio: gpio-tc3589x.c: fix checkpatch errors gpio: gpio-stp-xway.c: fix checkpatch error gpio: gpio-sch.c: fix checkpatch error ...
2013-05-04Merge tag 'boards-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board specific changes (part 1) from Olof Johansson: "These changes are all for board specific files. These used to make up a large portion of the ARM changes in the past, but as we are generalizing the support and moving to device tree probing, this has gotten significantly smaller. The only platform actually adding new code here at the moment is Renesas shmobile, as they are still busy converting their code to device tree and have not come far enough to not need it." * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) ARM: msm: USB_MSM_OTG needs USB_PHY ARM: davinci: da850 evm: fix const qualifier placement ARM: davinci: da850 board: add remoteproc support ARM: pxa: move debug uart code ARM: pxa: select PXA935 on saar & tavorevb ARM: mmp: add more compatible names in gpio driver ARM: pxa: move PXA_GPIO_TO_IRQ macro ARM: pxa: remove cpu_is_xxx in gpio driver ARM: Kirkwood: update Network Space Mini v2 description ARM: Kirkwood: DT board setup for CloudBox ARM: Kirkwood: sort board entries by ASCII-code order ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor omap2+: Remove useless Makefile line omap2+: Remove useless Makefile line ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d ARM: OMAP1: fix omap_udc registration ARM: davinci: use is IS_ENABLED macro ARM: kirkwood: add MACH_GURUPLUG_DT to defconfig ...
2013-05-02Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...
2013-04-24Revert "gpio: pxa: set initcall level to module init"Linus Walleij
This reverts commit 6c7e660a27da7494c670bfba21cfeba30457656c. The commit causes breakage on several older PXA machines. Reported-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-11ARM: mmp: add more compatible names in gpio driverHaojian Zhuang
Since more driver names are added into platform id, do the same thing on compatible names for DT mode. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-11ARM: pxa: move PXA_GPIO_TO_IRQ macroHaojian Zhuang
Since PXA_GPIO_TO_IRQ() & MMP_GPIO_TO_IRQ() macro are depended on arch code, move them from gpio driver to platform driver instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-11ARM: pxa: remove cpu_is_xxx in gpio driverHaojian Zhuang
Avoid to use cpu_is_xxx() in pxa gpio driver. Use platform_device_id to identify the difference. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: gpio-pxa.c: fix checkpatch errorsLaurent Navet
Fix : gpio/gpio-pxa.c:605: ERROR: space required after that ',' (ctx:VxV) gpio/gpio-pxa.c:672: ERROR: space prohibited after that open parenthesis '(' Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-26arm: Move chained_irq_(enter|exit) to a generic fileCatalin Marinas
These functions have been introduced by commit 10a8c383 (irq: introduce entry and exit functions for chained handlers) in asm/mach/irq.h. This patch moves them to linux/irqchip/chained_irq.h so that generic irqchip drivers do not rely on architecture specific header files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2013-01-25gpio: pxa: set initcall level to module initHaojian Zhuang
gpio & pinctrl driver are used together. The pinctrl driver is already launched before gpio driver in Makefile. So set gpio driver to module init level. Otherwise, the sequence will be inverted. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-12Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ...
2012-11-28gpio: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15ARM: pxa: remove pxa95x supportHaojian Zhuang
PXA95x isn't widely used. And it adds the effort on supporting multiple platform. So remove it. The assumption is that nobody will miss this support. If you are reading this text because you actually require pxa95x support on a new kernel, we can work out a way to revert this patch or add support to the mmp platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-02Merge tag 'gpio-for-v3.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "So this is the LW GPIO patch stack for v3.7: - refactoring from Thierry Redding at Arnd Bergmann's request to use the seq_file iterator interface in gpiolib. - A new driver for Avionic Design's N-bit GPIO expander. - Two instances of mutexes replaced by spinlocks from Axel Lin to code that is supposed to be fastpath compliant. - IRQ demuxer and gpio_to_irq() support for pcf857x by Kuninori Morimoto. - Dynamic GPIO numbers, device tree support, daisy chaining and some other fixes for the 74x164 driver by Maxime Ripard. - IRQ domain and device tree support for the tc3589x driver by Lee Jones. - Some conversion to use managed resources devm_* code. - Some instances of clk_prepare() or clk_prepare_enable() added to support the new, stricter common clock framework. - Some for_each_set_bit() simplifications. - Then a lot of fixes as we fixed up all of the above tripping over our own shoelaces and that kind of thing." * tag 'gpio-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (34 commits) gpio: pcf857x: select IRQ_DOMAIN gpio: Document device_node's det_debounce gpio-lpc32xx: Add GPI_28 gpio: adnp: dt: Reference generic interrupt binding gpio: Add Avionic Design N-bit GPIO expander support gpio: pxa: using for_each_set_bit to simplify the code gpio_msm: using for_each_set_bit to simplify the code gpio: Enable the tc3298x GPIO expander driver for Device Tree gpio: Provide the tc3589x GPIO expander driver with an IRQ domain ARM: shmobile: kzm9g: use gpio-keys instead of gpio-keys-polled gpio: pcf857x: fixup smatch WARNING gpio: 74x164: Add support for the daisy-chaining gpio: 74x164: dts: Add documentation for the dt binding dt: Fix incorrect reference in gpio-led documentation gpio: 74x164: Add device tree support gpio: 74x164: Use dynamic gpio number assignment if no pdata is present gpio: 74x164: Use devm_kzalloc gpio: 74x164: Use module_spi_driver boiler plate function gpio: sx150x: Use irq_data_get_irq_chip_data() at appropriate places gpio: em: Use irq_data_get_irq_chip_data() at appropriate places ...
2012-09-18gpio: pxa: using for_each_set_bit to simplify the codeWei Yongjun
Using for_each_set_bit() to simplify the code. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-05Merge branch 'soc-core' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt * 'soc-core' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: mach-shmobile: Add compilation support for dtbs using 'make dtbs' + sync to 3.6-rc3
2012-09-01drivers/gpio/gpio-pxa.c: use clk_prepare_enable and clk_disable_unprepareJulia Lawall
Clk_prepare_enable and clk_disable_unprepare combine clk_prepare and clk_enable, and clk_disable and clk_unprepare. They make the code more concise, and ensure that clk_unprepare is called when clk_enable fails. A simplified version of the semantic patch that introduces calls to these functions is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ - clk_prepare(e); - clk_enable(e); + clk_prepare_enable(e); @@ expression e; @@ - clk_disable(e); - clk_unprepare(e); + clk_disable_unprepare(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-16gpio: pxa: add chain_eneter and chain_exit for irq handlerChao Xie
Signed-off-by: Chao Xie <xiechao.mail@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-08-16GPIO: gpio-pxa: simplify pxa_gpio_to_irq() and pxa_irq_to_chip()Daniel Mack
Simplify the code in gpio-pxa.c and make them based on irq_base. When not probed from devicetree, initialize irq_base from PXA_GPIO_TO_IRQ() or MMP_GPIO_TO_IRQ(), respectively, so the non-DT case still works. Only tested on PXA3xx. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-08-14GPIO: gpio-pxa: fix building without CONFIG_OFArnd Bergmann
Commit 7212157267 ("GPIO: gpio-pxa: fix devicetree functions") added an "xlate" function pointer to the irq_domain_ops, but this function is nor declared or defined anywhere when CONFIG_OF is disabled, causing the build error: drivers/gpio/gpio-pxa.c:532:11: error: 'irq_domain_xlate_twocell' undeclared here (not in a function) Extending the DT-only code section to cover the irq_domain_ops and the pxa_gpio_dt_ids solves this problem and makes it clearer which code is actually used without DT. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-05GPIO: gpio-pxa: fix devicetree functionsDaniel Mack
Provide an of_xlate function for the PXA GPIO chips and make it work for devicetree environments. Successfully tested on a PXA3xx board. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-05gpio: pxa: parse gpio from DTS fileHaojian Zhuang
Parse GPIO numbers from DTS file. Allocate interrupt according to GPIO numbers. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-27ARM: pxa: fix gpio wakeup settingRobert Jarzmik
In 3.3, gpio wakeup setting was broken. The call enable_irq_wake() didn't set up the PXA gpio registers (PWER, ...) anymore. Fix it at least for pxa27x. The driver doesn't seem to be used in pxa25x (weird ...), and the fix doesn't extend to pxa3xx and pxa95x (which don't have a gpio_set_wake() available). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-01-25gpio: pxa: explicitly include mach/irqs.hRob Herring
In preparation to make mach/irqs.h optional and remove from asm/irq.h, directly include mach/irq.h to get MMP_GPIO_TO_IRQ and PXA_GPIO_TO_IRQ. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2011-11-15ARM: pxa: add clk support in gpio driverHaojian Zhuang
Support clk in gpio driver. There's no gpio clock in PXA25x and PXA27x. So use dummy clk instead. And move the gpio edge initialization into gpio driver for arch-mmp. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-15ARM: mmp: clear gpio edge detectHaojian Zhuang
Append code to clear gpio edge detect in gpio-pxa driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-15ARM: pxa: change gpio to platform deviceHaojian Zhuang
Remove most gpio macros and change gpio driver to platform driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: use little endian read write in gpio driverHaojian Zhuang
Remove __raw_readl()/__raw_writel(). Use readl_relaxed()/writel_relaxed() instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: recognize gpio number and typeHaojian Zhuang
Use cpuid to recognize the gpio number and type. CPU_PXA26x is the special case since we can't identify it by cpuid. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: rename gpio_to_irq and irq_to_gpioHaojian Zhuang
Avoid to define gpio_to_irq() and irq_to_gpio() for potential name confliction since multiple architecture will be built together. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: use chained interrupt for GPIO0 and GPIO1Haojian Zhuang
GPIO0 and GPIO1 are linked to unique interrupt line in PXA series, others are linked to another interrupt line. All GPIO are linked to one interrupt line in MMP series. Since gpio driver is shared between PXA series and MMP series, define GPIO0 and GPIO1 as chained interrupt chip. So we can move out gpio code from irq.c to gpio-pxa.c. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31Merge branch 'depends/rmk/gpio' into next/fixesArnd Bergmann
This sorts out merge conflicts with the arm/gpio branch that already got merged into mainline Linux. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: 7104/1: plat-pxa: break out GPIO driver specificsLinus Walleij
The <mach/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and driver specific defines and functions into its own header file. Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>