summaryrefslogtreecommitdiff
path: root/drivers/extcon
AgeCommit message (Collapse)Author
2023-12-12extcon: qcom-spmi-misc: don't use kernel-doc marker for commentRandy Dunlap
Do not use "/**" for non-kernel-doc comments. This prevents a warning from scripts/kernel-doc: warning: expecting prototype for extcon(). Prototype was for USB_ID_DEBOUNCE_MS() instead Link: https://lore.kernel.org/lkml/20231205231204.1130-1-rdunlap@infradead.org/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-12-05extcon: usbc-tusb320: Set interrupt polarity based on device-treeLukas Funke
Remove 'IRQF_TRIGGER_FALLING' request which is not allowed on every interrupt controller (i.e. arm64 GIC). Replace flag by a request that depends on the actual device-tree setting. Link: https://lore.kernel.org/all/02a701da2717$48abf150$da03d3f0$@samsung.com/ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311221355.yxYpTIw3-lkp@intel.com/ Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-12-04extcon: fix possible name leak in extcon_dev_register()Yaxiong Tian
In the error path after calling dev_set_name(), the device name is leaked. To fix this, moving dev_set_name() after the error path and before device_register. Link: https://lore.kernel.org/lkml/TYZPR01MB4784ADCD3E951E0863F3DB72D5B8A@TYZPR01MB4784.apcprd01.prod.exchangelabs.com/ Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-17extcon: realtek: add the error handler for nvmem_cell_readStanley Chang
There are following smatch warning: drivers/extcon/extcon-rtk-type-c.c:905 __updated_type_c_parameter_by_efuse() error: 'buf' dereferencing possible ERR_PTR() The nvmem_cell_read may fail to read. So, driver must handle failure cases. Link: https://lore.kernel.org/all/20231016053510.28881-1-stanley_chang@realtek.com/ Fixes: 8a590d7371f0 ("extcon: add Realtek DHC RTD SoC Type-C driver") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/a469dd51-f5d5-4e8f-ba36-6c7cea046fb8@moroto.mountain/ Signed-off-by: Stanley Chang <stanley_chang@realtek.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-06extcon: max77843: add device-tree compatible stringMarek Szyprowski
Add the needed device-tree compatible string to the MAX77843 extcon driver, so it can be automatically loaded when compiled as a kernel module and given device-tree contains separate 'muic' node under the main MAX77843 PMIC node. Link: https://lore.kernel.org/all/20231006100434.2908243-2-m.szyprowski@samsung.com/ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-06extcon: max77693: add device-tree compatible stringMarek Szyprowski
Commit 57f706bf7307 ("ARM: dts: samsung: exynos4412-midas: add USB connector and USB OTG") added a 'muic' node to the MAX77693 PMIC definition in various device-tree files. Since that commit, the newly created MFD cell gained its own of_node and compatible string. This changed its modalias, what in turn broke automated loading of the driver module, because the new modalias is based on the of_node compatible string, not the platform device name. Fix this by adding the needed device-tree compatible string. Link: https://lore.kernel.org/all/20231006100434.2908243-1-m.szyprowski@samsung.com/ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-06extcon: add Realtek DHC RTD SoC Type-C driverStanley Chang
This patch adds the extcon driver for Realtek DHC (digital home center) RTD SoCs type-c module. This can be used to detect whether the port is configured as a downstream or upstream facing port. And notify the status of extcon to listeners. Link: https://lore.kernel.org/lkml/20230904051253.23208-2-stanley_chang@realtek.com/ Signed-off-by: Stanley Chang <stanley_chang@realtek.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-08-05extcon: cht_wc: add POWER_SUPPLY dependencyArnd Bergmann
The driver fails to link when CONFIG_POWER_SUPPLY is disabled: x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_psy_get_prop': extcon-intel-cht-wc.c:(.text+0x15ccda7): undefined reference to `power_supply_get_drvdata' x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_pwrsrc_event': extcon-intel-cht-wc.c:(.text+0x15cd3e9): undefined reference to `power_supply_changed' x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_probe': extcon-intel-cht-wc.c:(.text+0x15cd596): undefined reference to `devm_power_supply_register' It should be possible to change the driver to not require this at compile time and still provide other functions, but adding a hard Kconfig dependency does not seem to have any practical downsides and is simpler since the option is normally enabled anyway. Fixes: 66e31186cd2aa ("extcon: intel-cht-wc: Add support for registering a power_supply class-device") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-06-01extcon: Switch i2c drivers back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Drop unneeded assignmentsAndy Shevchenko
In one case the assignment is duplicative, in the other, it's better to move it into the loop — the user of it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Use sizeof(*pointer) instead of sizeof(type)Andy Shevchenko
It is preferred to use sizeof(*pointer) instead of sizeof(type). The type of the variable can change and one needs not change the former (unlike the latter). No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Use unique number for the extcon device IDAndy Shevchenko
The use of atomic variable is still racy when we do not control which device has been unregistered and there is a (theoretical) possibility of the overflow that may cause a duplicate extcon device ID number to be allocated next time a device is registered. Replace above mentioned approach by using IDA framework. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Remove dup device name in the message and unneeded error checkAndy Shevchenko
The device name is already printed with dev_err(), no need to repeat. The device pointer itself is not supposed to be an error point, drop that check. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Use dev_of_node(dev) instead of dev->of_nodeAndy Shevchenko
The dev_of_node function should be preferred. In the result we may drop unneeded NULL check of the pointer to the device object. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Use device_match_of_node() helperAndy Shevchenko
Instead of open coding, use device_match_of_node() helper. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Amend kernel documentation of struct extcon_devAndy Shevchenko
First of all, the @lock description is missing. Add it. Second, correct the terminator value for the mutual exclusive cabling. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Use sysfs_emit() to instead of sprintf()Andy Shevchenko
Follow the advice of the Documentation/filesystems/sysfs.rst that show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Use DECLARE_BITMAP() to declare bit arraysAndy Shevchenko
Bit arrays has a specific type helper for the declaration. Use it instead of homegronw equivalent. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Fix kernel doc of property capability fields to avoid warningsAndy Shevchenko
Kernel documentation has to be synchronized with a code, otherwise the validator is not happy: Function parameter or member 'usb_bits' not described in 'extcon_cable' Function parameter or member 'chg_bits' not described in 'extcon_cable' Function parameter or member 'jack_bits' not described in 'extcon_cable' Function parameter or member 'disp_bits' not described in 'extcon_cable' Describe the fields added in the past. Fixes: ceaa98f442cf ("extcon: Add the support for the capability of each property") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Fix kernel doc of property fields to avoid warningsAndy Shevchenko
Kernel documentation has to be synchronized with a code, otherwise the validator is not happy: Function parameter or member 'usb_propval' not described in 'extcon_cable' Function parameter or member 'chg_propval' not described in 'extcon_cable' Function parameter or member 'jack_propval' not described in 'extcon_cable' Function parameter or member 'disp_propval' not described in 'extcon_cable' Describe the fields added in the past. Fixes: 067c1652e7a7 ("extcon: Add the support for extcon property according to extcon type") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: usbc-tusb320: add USB_ROLE_SWITCH dependencyArnd Bergmann
When CONFIG_USB_ROLE_SWITCH=m, tusb320 cannot be built-in: ld.lld: error: undefined symbol: fwnode_usb_role_switch_get >>> referenced by extcon-usbc-tusb320.c >>> drivers/extcon/extcon-usbc-tusb320.o:(tusb320_probe) in archive vmlinux.a ld.lld: error: undefined symbol: usb_role_switch_set_role >>> referenced by extcon-usbc-tusb320.c >>> drivers/extcon/extcon-usbc-tusb320.o:(tusb320_state_update_handler) in archive vmlinux.a Add the appropriate Kconfig dependency to prevent this configuration but still allow the driver to be built-in when USB_ROLE_SWITCH is disabled. Fixes: df101446a402 ("extcon: usbc-tusb320: add usb_role_switch support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: usbc-tusb320: add usb_role_switch supportAlvin Šipraga
The connector child node of the TUSB320 device might be linked with a dual-role capable USB controller. Add driver support for detecting a usb_role_switch and setting its state in the typec interrupt handler. This follows similar practice in other drivers in the typec subsystem, which this extcon driver can opt-in to. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: usbc-tusb320: add accessory detection supportAlvin Šipraga
The TUSB320 can detect the following types of accessory: - Audio Accessory - Audio Accessory with charge-thru - Debug Accessory (DFP) - Debug Accessory (UFP) Moreover, the typec subsystem can be informed of this through the typec_set_mode() function. The information will be propagated to any linked typec muxes. Add the necessary support to the driver. Note that for the Debug Accessory modes, an educated guess was made that for the USB data role, DFP implies HOST and UFP implies DEVICE. But this might want to be made configurable at a later date. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Add extcon_alloc_groups to simplify extcon register functionBumwoo Lee
The alloc groups is functionalized from extcon_dev_register. Signed-off-by: Bumwoo Lee <bw365.lee@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Add extcon_alloc_muex to simplify extcon register functionBumwoo Lee
The mutual exclusive part is functionalized from extcon_dev_register. Signed-off-by: Bumwoo Lee <bw365.lee@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Add extcon_alloc_cables to simplify extcon register functionBumwoo Lee
The cable allocation part is functionalized from extcon_dev_register. Signed-off-by: Bumwoo Lee <bw365.lee@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: Remove redundant null checking for classBumwoo Lee
create_extcon_class() is already Null checking. Signed-off-by: Bumwoo Lee <bw365.lee@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: palmas: Remove unused of_gpio.hAndy Shevchenko
of_gpio.h provides a single function, which is not used in this driver. Remove unused header. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: qcom-spmi: Switch to platform_get_irq_byname_optionalBryan O'Donoghue
Valid configurations for the extcon interrupt declarations are - usb_id - usb_vbus - (usb_id | usb_vbus) In the case of a standalone usb_id or usb_vbus failure to find one of the interrupts shouldn't generate a warning message. A warning is already in place if both IRQs are missing. Switch to using platform_get_irq_byname_optional() in order to facilitate this behaviour. Suggested-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: axp288: Replace open coded acpi_dev_put()Andy Shevchenko
Instead of calling put_device(&adev->dev) where adev is a pointer to an ACPI device, use specific call, i.e. acpi_dev_put(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-05-29extcon: usbc-tusb320: Unregister typec port on driver removalAlvin Šipraga
The driver can register a typec port if suitable firmware properties are present. But if the driver is removed through sysfs unbind, rmmod or similar, then it does not clean up after itself and the typec port device remains registered. This can be seen in sysfs, where stale typec ports get left over in /sys/class/typec. In order to fix this we have to add an i2c_driver remove function and call typec_unregister_port(), which is a no-op in the case where no typec port is created and the pointer remains NULL. In the process we should also put the fwnode_handle when the typec port isn't registered anymore, including if an error occurs during probe. The typec subsystem does not increase or decrease the reference counter for us, so we track it in the driver's private data. Note that the conditional check on TYPEC_PWR_MODE_PD was removed in the probe path because a call to tusb320_set_adv_pwr_mode() will perform an even more robust validation immediately after, hence there is no functional change here. Fixes: bf7571c00dca ("extcon: usbc-tusb320: Add USB TYPE-C support") Cc: stable@vger.kernel.org Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-03-17driver core: class: remove module * from class_create()Greg Kroah-Hartman
The module pointer in class_create() never actually did anything, and it shouldn't have been requred to be set as a parameter even if it did something. So just remove it and fix up all callers of the function in the kernel tree at the same time. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-04extcon: intel-cht-wc: Add support for Lenovo Yoga Tab 3 Pro YT3-X90FHans de Goede
The Lenovo Yoga Tab 3 Pro YT3-X90F needs the same handling as the Lenovo Yogabook models. That is it needs the extcon code to: 1. Control the Vbus regulator and USB-role-switch for the micro-USB port's host/device mode switching. 2. Register a power_supply device so that the charger-chip driver can see what sort of charger (SDP/CDP/DCP) is connected. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230126153823.22146-4-hdegoede@redhat.com
2022-12-16Merge tag 'char-misc-6.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc and other driver subsystem changes for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of new driver development and minor fixes. Highlights include: - fastrpc driver updates - iio new drivers and updates - habanalabs driver updates for new hardware and features - slimbus driver updates - speakup module parameters added to aid in boot time configuration - i2c probe_new conversions for lots of different drivers - other small driver fixes and additions One semi-interesting change in here is the increase of the number of misc dynamic minors available to 1048448 to handle new huge-cpu systems. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits) extcon: usbc-tusb320: Convert to i2c's .probe_new() extcon: rt8973: Convert to i2c's .probe_new() extcon: fsa9480: Convert to i2c's .probe_new() extcon: max77843: Replace irqchip mask_invert with unmask_base chardev: fix error handling in cdev_device_add() mcb: mcb-parse: fix error handing in chameleon_parse_gdd() drivers: mcb: fix resource leak in mcb_probe() coresight: etm4x: fix repeated words in comments coresight: cti: Fix null pointer error on CTI init before ETM coresight: trbe: remove cpuhp instance node before remove cpuhp state counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update misc: fastrpc: Add dma_mask to fastrpc_channel_ctx misc: fastrpc: Add mmap request assigning for static PD pool misc: fastrpc: Safekeep mmaps on interrupted invoke misc: fastrpc: Add support for audiopd misc: fastrpc: Rework fastrpc_req_munmap misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail misc: fastrpc: Add fastrpc_remote_heap_alloc misc: fastrpc: Add reserved mem support misc: fastrpc: Rename audio protection domain to root ...
2022-12-03extcon: usbc-tusb320: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-12-03extcon: rt8973: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-12-03extcon: fsa9480: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-12-03extcon: max77843: Replace irqchip mask_invert with unmask_baseAidan MacDonald
Remove use of the deprecated mask_invert flag. Inverted mask registers (where a '1' bit enables an IRQ) can be described more directly as an unmask register. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-11-22extcon: usbc-tusb320: Update state on probe even if no IRQ pendingMarek Vasut
Currently this driver triggers extcon and typec state update in its probe function, to read out current state reported by the chip and report the correct state to upper layers. This synchronization is performed correctly, but only in case the chip indicates a pending interrupt in reg09 register. This fails to cover the situation where all interrupts reported by the chip were already handled by Linux before reboot, then the system rebooted, and then Linux starts again. In this case, the TUSB320 no longer reports any interrupts in reg09, and the state update does not perform any update as it depends on that interrupt indication. Fix this by turning tusb320_irq_handler() into a thin wrapper around tusb320_state_update_handler(), where the later now contains the bulk of the code of tusb320_irq_handler(), but adds new function parameter "force_update". The "force_update" parameter can be used by the probe function to assure that the state synchronization is always performed, independent of the interrupt indicated in reg09. The interrupt handler tusb320_irq_handler() callback uses force_update=false to avoid state updates on potential spurious interrupts and retain current behavior. Fixes: 06bc4ca115cdd ("extcon: Add driver for TI TUSB320") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221120141509.81012-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-08extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registeredYassine Oudjana
Commit bf7571c00dca ("extcon: usbc-tusb320: Add USB TYPE-C support") added an optional Type-C interface to the driver but missed to check if it is in use when calling the IRQ handler. This causes an oops on devices currently using the old extcon interface. Check if a Type-C port is registered before calling the Type-C IRQ handler. Fixes: bf7571c00dca ("extcon: usbc-tusb320: Add USB TYPE-C support") Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221107153317.657803-1-y.oudjana@protonmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-08Merge tag 'char-misc-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...
2022-09-26extcon: usbc-tusb320: fix kernel-doc warningRong Chen
Fix the warning: drivers/extcon/extcon-usbc-tusb320.c:19: warning: expecting prototype for drivers/extcon/extcon-tusb320.c(). Prototype was for TUSB320_REG8() instead Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rong Chen <rong.a.chen@intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-09-26extcon: usbc-tusb320: Add USB TYPE-C supportMarek Vasut
The TI TUSB320 seems like a better fit for USB TYPE-C subsystem, which can expose details collected by the TUSB320 in a far more precise way than extcon. Since there are existing users in the kernel and in DT which depend on the extcon interface, keep it for now. Add TYPE-C interface and expose the supported supply current, direction and connector polarity via the TYPE-C interface. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-09-26extcon: usbc-tusb320: Factor out extcon into dedicated functionsMarek Vasut
Move extcon code into separate functions in preparation for addition of USB TYPE-C support. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-15extcon: Add EXTCON_DISP_CVBS and EXTCON_DISP_EDPMichael Wu
Add EXTCON_DISP_CVBS for Composite Video Broadcast Signal. Add EXTCON_DISP_EDP for Embedded Display Port [1] https://en.wikipedia.org/wiki/Composite_video [2] https://en.wikipedia.org/wiki/DisplayPort#eDP Signed-off-by: Michael Wu <michael@allwinnertech.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-15extcon: rt8973a: Drop useless mask_invert flag on irqchipAidan MacDonald
There's no need to set the flag explicitly to false, since that is the default value from zero initialization. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-15extcon: sm5502: Drop useless mask_invert flag on irqchipAidan MacDonald
There's no need to set the flag explicitly to false, since that is the default value from zero initialization. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-15extcon: Drop unexpected word "the" in the commentsJiang Jian
there is an unexpected word "the" in the comments that need to be dropped file: ./drivers/extcon/extcon.c line: 250 /* Find the the index of extcon cable in edev->supported_cable */ changed to /* Find the index of extcon cable in edev->supported_cable */ Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-15extcon: Remove extraneous space before a debug messageColin Ian King
There is an extreneous space before a dev_dbg message, remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-04 18:04:19 +0000