| Age | Commit message (Collapse) | Author |
|---|
|
Convert the driver to use the core virt-dma. The driver will be easier to
maintain as it uses the list handling and the tasklet from virt-dma.
With the conversion replace the election of a new transfer in the tasklet
with the election of the new transfer in the interrupt handler. With this
we have a shorter idle window as we remove the scheduling latency of the
tasklet. I chose to do this while doing the conversion to virt-dma,
because if I made a prerequisite patch with the new transfer election in
the irq handler, I would have to duplicate some virt-dma code in the
at_hdmac driver that would end up being removed at the virt-dma conversion
anyway. So do this in a single step.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-33-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The pointer to at_dma engine was never used, remove it.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-32-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
"chan_common" was misleading and did not suggest that's actually
a struct dma_chan underneath. Rename it so that readers can follow the
code easier. One may see some checks when running checkpatch. Those have
nothing to do with the rename and will be addressed in a further patch.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-31-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
"dma_common" name was misleading and did not suggest that's actually
a struct dma_device underneath. Rename it so that readers can follow the
code easier. One may see some checks and a warning when running
checkpatch. Those have nothing to do with the rename and will be addressed
in a further patch.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-30-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use the bitfield access macros in order to clean and to make the driver
easier to read. One will see some "line length exceeds 100 columns"
checkpatch warnings. I chose to not introduce new lines for regs
descriptions in order to preserve the style of the comments throughout
the definitions. Style can be fixed in a further patch.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-29-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
at_hdmac.c
Do not expose register definitions, structures and helpers via a .h file
because there are used only by at_hdmac.c. Since there are no other users,
remove the ambiguity and move all the .h contents to the .c file.
One may notice some checkpatch warnings and errors with this move. The move
was done "as it was", checkpatch complaints can be fixed in a further
patch.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-28-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
It's a good practice to set the include entries in alphabetic order. It
helps humans to read the code easier. Alphabetic order should also prove
that each header is self-contained, i.e. can be included without
prerequisites.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-27-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use pm_ptr() macro to fill at_dma_driver.driver.pm. In case CONFIG_PM is
not enabled, the macro will return NULL. When NULL, at_dma_dev_pm_ops will
end up being unused, so prepend it with the __maybe_unused attribute.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-26-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Clocks that are get with this method will be automatically put on driver
detach. Use devm_clk_get() and simplify the error handling.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-25-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource() helper for cleanner code and easier
resource management.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-24-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use the resource-managed kzalloc to simplify error logic. Memory allocated
with this function is automatically freed on driver detach. Use
struct_size() helper to calculate the size of the atdma structure with its
trailing flexible array. While here, move the mem allocation higher in the
probe method, as failing to allocate memory indicates a serious system
issue, and everything else does not matter anyway. All these help the code
look a bit cleaner.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-23-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Introduce a method to get the residue for a hardware linked list transfer.
It makes the code easier to read.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-22-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use dmaengine terminology and rename the method to better indicate what it
does: it gets the residue value which will be later on set with
dma_set_residue().
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-21-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
struct dma_tx_state defines residue as u32. atc_get_bytes_left() returned
an int which could be either an error or the value of the residue. This
could cause problems if the controller supported a u32 buffer transfer size
and the u32 value was past the max int can hold. Our controller does not
support u32 buffer transfer size, but even so, improve the code and pass
the residue by address to avoid unnecessary implicit casts and make
atc_get_bytes_left() return 0 on success or -errno on errors.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-20-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Conversions of void * are applied automatically when other pointer types
are assigned to and from void *. Remove the superfluous cast.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-19-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
txstate is an optional parameter used to get a struct with auxilary
transfer status information. When not provided the call to
device_tx_status() should return the status of the dma cookie. Return the
status of dma cookie when the txstate optional parameter is not provided.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-18-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The descriptor was already removed from the transfer list, there's no
reason to keep the channel lock while printing desc info, thus do the
prints without holding the lock.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-17-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Merge due to at_hdmac driver dependency
|
|
dma_async_device_register() can fail, check the return code and display an
error.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-16-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The iterator can not be greater than ATC_MAX_DSCR_TRIALS, as the for loop
will stop when i == ATC_MAX_DSCR_TRIALS. While here, use the common "i"
name for the iterator.
Fixes: 93dce3a6434f ("dmaengine: at_hdmac: fix residue computation")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-15-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
at_hdmac uses __raw_writel for register writes. In the absence of a
barrier, the CPU may reorder the register operations.
Introduce a write memory barrier so that the CPU does not reorder the
channel enable, thus the start of the transfer, without making sure that
all the pre-required register fields are already written.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-14-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In case the controller detected an error, the code took the chance to move
all the queued (submitted) descriptors to the active (issued) list. This
was wrong as if there were any descriptors in the submitted list they were
moved to the issued list without actually issuing them to the controller,
thus a completion could be raised without even fireing the descriptor.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-13-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
As it was before, the descriptor was issued to the hardware without adding
it to the active (issued) list. This could result in a completion of other
descriptor, or/and in the descriptor never being completed.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-12-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The tasklet (atc_advance_work()) did not held the channel lock when
retrieving the first active descriptor, causing concurrency problems if
issue_pending() was called in between. If issue_pending() was called
exactly after the lock was released in the tasklet (atc_advance_work()),
atc_chain_complete() could complete a descriptor for which the controller
has not yet raised an interrupt.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-11-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There's no need to hold the channel lock when freeing the memset buf, as
the operation has already completed. Free the memset buf without holding
the channel lock.
Fixes: 4d112426c344 ("dmaengine: hdmac: Add memset capabilities")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-10-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The descriptor was added to the free_list before calling the callback,
which could result in reissuing of the same descriptor and calling of a
single callback for both. Move the decriptor to the free list after the
callback is invoked.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-9-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
atc_complete_all() had concurrency bugs, thus remove it:
1/ atc_complete_all() in its entirety was buggy, as when the atchan->queue
list (the one that contains descriptors that are not yet issued to the
hardware) contained descriptors, it fired just the first from the
atchan->queue, but moved all the desc from atchan->queue to
atchan->active_list and considered them all as fired. This could result in
calling the completion of a descriptor that was not yet issued to the
hardware.
2/ when in tasklet at atc_advance_work() time, atchan->active_list was
queried without holding the lock of the chan. This can result in
atchan->active_list concurrency problems between the tasklet and
issue_pending().
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-8-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Now that the complete callback call was removed from
device_terminate_all(), we can protect the atchan->status with the channel
lock. The atomic bitops on atchan->status do not substitute proper locking
on the status, as one could still modify the status after the lock was
dropped in atc_terminate_all() but before the atomic bitops were executed.
Fixes: 078a6506141a ("dmaengine: at_hdmac: Fix deadlocks")
Reported-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-7-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The method was wrong because it violated the dmaengine API. For aborted
transfers the complete callback should not be called. Fix the behavior and
do not call the complete callback on device_terminate_all.
Fixes: 808347f6a317 ("dmaengine: at_hdmac: add DMA slave transfers")
Reported-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-6-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Multiple calls to atc_issue_pending() could result in a premature
completion of a descriptor from the atchan->active list, as the method
always completed the first active descriptor from the list. Instead,
issue_pending() should just take the first transaction descriptor from the
pending queue, move it to active_list and start the transfer.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-5-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Cyclic channels must too call issue_pending in order to start a transfer.
Start the transfer in issue_pending regardless of the type of channel.
This wrongly worked before, because in the past the transfer was started
at tx_submit level when only a desc in the transfer list.
Fixes: 53830cc75974 ("dmaengine: at_hdmac: add cyclic DMA operation support")
Reported-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-4-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
tx_submit is supposed to push the current transaction descriptor to a
pending queue, waiting for issue_pending() to be called. issue_pending()
must start the transfer, not tx_submit(), thus remove atc_dostart() from
atc_tx_submit(). Clients of at_xdmac that assume that tx_submit() starts
the transfer must be updated and call dma_async_issue_pending() if they
miss to call it.
The vdbg print was moved to after the lock is released. It is desirable to
do the prints without the lock held if possible, and because the if
statement disappears there's no reason why to do the print while holding
the lock.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-3-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Those hardware registers are all of 32 bits, while dma_addr_t ca be of
type u64 or u32 depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to
comply with what the hardware expects.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-2-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When disabling dma channel, a TCF flag is set and as TCIE is enabled, an
interrupt is raised.
On a busy system, the interrupt may have latency and the user can ask for
dmaengine_resume while stm32-dma driver has not yet managed the complete
pause (backup of registers to restore state in resume).
To avoid such a case, instead of waiting the interrupt to backup the
registers, do it just after disabling the channel and discard Transfer
Complete interrupt in case the channel is paused.
Fixes: 099a9a94be0e ("dmaengine: stm32-dma: add device_pause/device_resume support")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20221024083611.132588-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
If device_register() fails, it should call put_device() to give
up reference, the name allocated in dev_set_name() can be freed
in callback function kobject_cleanup().
Fixes: 5b65781d06ea ("dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221020062827.2914148-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A clk_prepare_enable() call in the probe is not balanced by a corresponding
clk_disable_unprepare() in the remove function.
Add the missing call.
Fixes: 3cd2c313f1d6 ("dmaengine: mv_xor_v2: Fix clock resource by adding a register clock")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e9e3837a680c9bd2438e4db2b83270c6c052d005.1666640987.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The of_xlate callback is supposed to return the channel after already
having 'grabbed' it for private use, so fill that in.
Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20221019132324.8585-1-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When IDXD is not configurable, that means its WQ, engine, and group
configurations cannot be changed. But it can be disabled and its state
should be set as disabled regardless it's configurable or not.
Fix this by setting device state IDXD_DEV_DISABLED for read-only device
as well in idxd_device_clear_state().
Fixes: cf4ac3fef338 ("dmaengine: idxd: fix lockdep warning on device driver removal")
Signed-off-by: Fengqian Gao <fengqian.gao@intel.com>
Reviewed-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220930032835.2290-1-fengqian.gao@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
>From Intel IAA spec [1], Intel IAA does not support batch processing.
Two batch related default values for IAA are incorrect in current code:
(1) The max batch size of device is set during device initialization,
that indicates batch is supported. It should be always 0 on IAA.
(2) The max batch size of work queue is set to WQ_DEFAULT_MAX_BATCH (32)
as the default value regardless of Intel DSA or IAA device during
work queue setup and cleanup. It should be always 0 on IAA.
Fix the issues by setting the max batch size of device and max batch
size of work queue to 0 on IAA device, that means batch is not
supported.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858
Fixes: 23084545dbb0 ("dmaengine: idxd: set max_xfer and max_batch for RO device")
Fixes: 92452a72ebdf ("dmaengine: idxd: set defaults for wq configs")
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220930201528.18621-2-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The first IRQ is required, but IRQs 1 through (nb_phy_chans - 1) are
optional, because on some platforms (e.g. PXA168) there is a single IRQ
shared between all channels.
This change inhibits a flood of "IRQ index # not found" messages at
startup. Tested on a PXA168-based device.
Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20220906000709.52705-1-doug@schmorgal.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In current code, the following sysfs attributes are exposed to user to
show or update the values:
max_read_buffers (max_tokens)
read_buffer_limit (token_limit)
group/read_buffers_allowed (group/tokens_allowed)
group/read_buffers_reserved (group/tokens_reserved)
group/use_read_buffer_limit (group/use_token_limit)
>From Intel IAA spec [1], Intel IAA does not support Read Buffer
allocation control. So these sysfs attributes should not be supported on
IAA device.
Fix this issue by making these sysfs attributes invisible through
is_visible() filter when the device is IAA.
Add description in the ABI documentation to mention that these
attributes are not visible when the device does not support Read Buffer
allocation control.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858
Fixes: fde212e44f45 ("dmaengine: idxd: deprecate token sysfs attributes for read buffers")
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221022074949.11719-1-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
shdma-arm.h was introduced with commit 1e69653d40f1 ("DMA: shdma: add
r8a73a4 DMAC data to the device ID table"), and its sole user was
removed with commit a19788612f51 ("dmaengine: sh: Remove R-Mobile APE6
support"). The latter mentions r8a73a4.dtsi but shdma support was
removed from that with commit cfda82037780 ("ARM: dts: r8a73a4: Remove
non-functional DMA support"), so it seems this is safe to remove.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20221028115336.1052782-1-steve@sk2.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
document xilinx_dma_device_config() return value. Fixes below
kernel-doc warning.
xilinx_dma.c:1665: warning: No description found for return value
of 'xilinx_dma_device_config'
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1666683737-7668-3-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Modify xilinx_dma_child_probe() return documentation to be inline
with implementation i.e. can also return failure value on error.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1666683737-7668-2-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The s3c24xx platform was removed and this driver is no longer
needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221021203329.4143397-14-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The iop32x platform was removed, so this driver is no longer
needed.
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20221019150410.3851944-10-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There's a previously unknown part of the controller interface: We have
to assign SRAM carveouts to channels to store their in-flight samples
in. So, obtain the size of the SRAM from a read-only register and divide
it into 2K blocks for allocation to channels. The FIFO depths we
configure will always fit into 2K.
(This fixes audio artifacts during simultaneous playback/capture on
multiple channels -- which looking back is fully accounted for by having
had the caches in the DMA controller overlap in memory.)
Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20221019132324.8585-2-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In current code, dev.max_batch_size and wq.max_batch_size attributes in
sysfs are exposed to user to show or update the values.
>From Intel IAA spec [1], Intel IAA does not support batch processing. So
these sysfs attributes should not be supported on IAA device.
Fix this issue by making the attributes of max_batch_size invisible in
sysfs through is_visible() filter when the device is IAA.
Add description in the ABI documentation to mention that the attributes
are not visible when the device does not support batch.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858
Fixes: e7184b159dd3 ("dmaengine: idxd: add support for configurable max wq batch size")
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220930201528.18621-3-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The function idma64_remove() returns zero unconditionally. Make it
return void.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221014161250.468687-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The JZ4755 has 4 DMA channels per DMA unit, two idential DMA units.
The JZ4755 has the similar DMA engine to JZ4725b and it has the
same bug as JZ4725b, see commit a40c94be2336.
At least the JZ_SOC_DATA_BREAK_LINKS flag make it work much better,
although not ideal.
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Siarhei Volkau <lis8215@gmail.com>
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221019063934.3278444-3-lis8215@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
