| Age | Commit message (Collapse) | Author |
|---|
|
The commit 1098582a0f6c ("sched,idle,rcu: Push rcu_idle deeper into the
idle path"), moved the calls rcu_idle_enter|exit() into the cpuidle core.
However, it forgot to remove a couple of comments in enter_s2idle_proper()
about why RCU_NONIDLE earlier was needed. So, let's drop them as they have
become a bit misleading.
Fixes: 1098582a0f6c ("sched,idle,rcu: Push rcu_idle deeper into the idle path")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The commit eb1f00237aca ("lockdep,trace: Expose tracepoints"), started to
expose us for tracepoints. This lead to the following RCU splat on an ARM64
Qcom board.
[ 5.529634] WARNING: suspicious RCU usage
[ 5.537307] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.541092] 5.9.0-rc3 #86 Not tainted
[ 5.541098] -----------------------------
[ 5.541105] ../include/trace/events/lock.h:37 suspicious rcu_dereference_check() usage!
[ 5.541110]
[ 5.541110] other info that might help us debug this:
[ 5.541110]
[ 5.541116]
[ 5.541116] rcu_scheduler_active = 2, debug_locks = 1
[ 5.541122] RCU used illegally from extended quiescent state!
[ 5.541129] no locks held by swapper/0/0.
[ 5.541134]
[ 5.541134] stack backtrace:
[ 5.541143] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.9.0-rc3 #86
[ 5.541149] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[ 5.541157] Call trace:
[ 5.568185] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 5.574186] dump_backtrace+0x0/0x1c8
[ 5.574206] show_stack+0x14/0x20
[ 5.574229] dump_stack+0xe8/0x154
[ 5.574250] lockdep_rcu_suspicious+0xd4/0xf8
[ 5.574269] lock_acquire+0x3f0/0x460
[ 5.574292] _raw_spin_lock_irqsave+0x80/0xb0
[ 5.574314] __pm_runtime_suspend+0x4c/0x188
[ 5.574341] psci_enter_domain_idle_state+0x40/0xa0
[ 5.574362] cpuidle_enter_state+0xc0/0x610
[ 5.646487] cpuidle_enter+0x38/0x50
[ 5.650651] call_cpuidle+0x18/0x40
[ 5.654467] do_idle+0x228/0x278
[ 5.657678] cpu_startup_entry+0x24/0x70
[ 5.661153] rest_init+0x1a4/0x278
[ 5.665061] arch_call_rest_init+0xc/0x14
[ 5.668272] start_kernel+0x508/0x540
Following the path in pm_runtime_put_sync_suspend() from
psci_enter_domain_idle_state(), it seems like we end up using the RCU.
Therefore, let's simply silence the splat by informing the RCU about it
with RCU_NONIDLE.
Note that, this is a temporary solution. Instead we should strive to avoid
using RCU_NONIDLE (and similar), but rather push rcu_idle_enter|exit()
further down, closer to the arch specific code. However, as the CPU PM
notifiers are also using the RCU, additional rework is needed.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.9:
- Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing
crashes.
- Fix a long standing bug in our DMA mask handling that was hidden
until recently, and which caused problems with some drivers.
- Fix a boot failure on systems with large amounts of RAM, and no
hugepage support and using Radix MMU, only seen in the lab.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy,
Hari Bathini, Ira Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav
Jain, and Vaidyanathan Srinivasan"
* tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Limit the readability of 'perf_stats' sysfs attribute
cpuidle: pseries: Fix CEDE latency conversion from tb to us
powerpc/dma: Fix dma_map_ops::get_required_mask
Revert "powerpc/build: vdso linker warning for orphan sections"
powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc
selftests/powerpc: Skip PROT_SAO test in guests/LPARS
powerpc/book3s64/radix: Fix boot failure with large amount of guest memory
|
|
Some drivers have to do significant work, some of which relies on RCU
still being active. Instead of using RCU_NONIDLE in the drivers and
flipping RCU back on, allow drivers to take over RCU-idle duty.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit d947fb4c965c ("cpuidle: pseries: Fixup exit latency for
CEDE(0)") sets the exit latency of CEDE(0) based on the latency values
of the Extended CEDE states advertised by the platform. The values
advertised by the platform are in timebase ticks. However the cpuidle
framework requires the latency values in microseconds.
If the tb-ticks value advertised by the platform correspond to a value
smaller than 1us, during the conversion from tb-ticks to microseconds,
in the current code, the result becomes zero. This is incorrect as it
puts a CEDE state on par with the snooze state.
This patch fixes this by rounding up the result obtained while
converting the latency value from tb-ticks to microseconds. It also
prints a warning in case we discover an extended-cede state with
wakeup latency to be 0. In such a case, ensure that CEDE(0) has a
non-zero wakeup latency.
Fixes: d947fb4c965c ("cpuidle: pseries: Fixup exit latency for CEDE(0)")
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1599125247-28488-1-git-send-email-ego@linux.vnet.ibm.com
|
|
This allows moving the leave_mm() call into generic code before
rcu_idle_enter(). Gets rid of more trace_*_rcuidle() users.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.369441600@infradead.org
|
|
Lots of things take locks, due to a wee bug, rcu_lockdep didn't notice
that the locking tracepoints were using RCU.
Push rcu_idle_{enter,exit}() as deep as possible into the idle paths,
this also resolves a lot of _rcuidle()/RCU_NONIDLE() usage.
Specifically, sched_clock_idle_wakeup_event() will use ktime which
will use seqlocks which will tickle lockdep, and
stop_critical_timings() uses lock.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.310943801@infradead.org
|
|
Match the pattern elsewhere in this file.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.251340558@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on
Power9 or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be
unsupported on Power10 and future processors, leaving us with no way
to implement the functionality it requests. This risks breaking
userspace, though we believe it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion
checking. We now allow stack expansion up to the rlimit, like other
architectures.
- Remove the remnants of our (previously disabled) topology update
code, which tried to react to NUMA layout changes on virtualised
systems, but was prone to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link
stack (branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as
usual.
Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.
* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
selftests/powerpc: Fix pkey syscall redefinitions
powerpc: Fix circular dependency between percpu.h and mmu.h
powerpc/powernv/sriov: Fix use of uninitialised variable
selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
powerpc/40x: Fix assembler warning about r0
powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
cpuidle: pseries: Fixup exit latency for CEDE(0)
cpuidle: pseries: Add function to parse extended CEDE records
cpuidle: pseries: Set the latency-hint before entering CEDE
selftests/powerpc: Fix online CPU selection
powerpc/perf: Consolidate perf_callchain_user_[64|32]()
powerpc/pseries/hotplug-cpu: Remove double free in error path
powerpc/pseries/mobility: Add pr_debug() for device tree changes
powerpc/pseries/mobility: Set pr_fmt()
powerpc/cacheinfo: Warn if cache object chain becomes unordered
powerpc/cacheinfo: Improve diagnostics about malformed cache lists
powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
powerpc/cacheinfo: Set pr_fmt()
powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
...
|
|
We are currently assuming that CEDE(0) has exit latency 10us, since
there is no way for us to query from the platform. However, if the
wakeup latency of an Extended CEDE state is smaller than 10us, then we
can be sure that the exit latency of CEDE(0) cannot be more than that.
In this patch, we fix the exit latency of CEDE(0) if we discover an
Extended CEDE state with wakeup latency smaller than 10us.
Benchmark results:
On POWER8, this patch does not have any impact since the advertized
latency of Extended CEDE (1) is 30us which is higher than the default
latency of CEDE (0) which is 10us.
On POWER9 we see improvement the single-threaded performance of
ebizzy, and no regression in the wakeup latency or the number of
context-switches.
ebizzy:
2 ebizzy threads bound to the same big-core. 25% improvement in the
avg records/s with patch.
x without_patch
* with_patch
N Min Max Median Avg Stddev
x 10 2491089 5834307 5398375 4244335 1596244.9
* 10 2893813 5834474 5832448 5327281.3 1055941.4
context_switch2:
There is no major regression observed with this patch as seen from the
context_switch2 benchmark.
context_switch2 across CPU0 CPU1 (Both belong to same big-core, but
different small cores). We observe a minor 0.14% regression in the
number of context-switches (higher is better).
x without_patch
* with_patch
N Min Max Median Avg Stddev
x 500 348872 362236 354712 354745.69 2711.827
* 500 349422 361452 353942 354215.4 2576.9258
Difference at 99.0% confidence
-530.288 +/- 430.963
-0.149484% +/- 0.121485%
(Student's t, pooled s = 2645.24)
context_switch2 across CPU0 CPU8 (Different big-cores). We observe a
0.37% improvement in the number of context-switches (higher is
better).
x without_patch
* with_patch
N Min Max Median Avg Stddev
x 500 287956 294940 288896 288977.23 646.59295
* 500 288300 294646 289582 290064.76 1161.9992
Difference at 99.0% confidence
1087.53 +/- 153.194
0.376337% +/- 0.0530125%
(Student's t, pooled s = 940.299)
schbench:
No major difference could be seen until the 99.9th percentile.
Without-patch:
Latency percentiles (usec)
50.0th: 29
75.0th: 39
90.0th: 49
95.0th: 59
*99.0th: 13104
99.5th: 14672
99.9th: 15824
min=0, max=17993
With-patch:
Latency percentiles (usec)
50.0th: 29
75.0th: 40
90.0th: 50
95.0th: 61
*99.0th: 13648
99.5th: 14768
99.9th: 15664
min=0, max=29812
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
[mpe: Minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596087177-30329-4-git-send-email-ego@linux.vnet.ibm.com
|
|
Currently we use CEDE with latency-hint 0 as the only other idle state
on a dedicated LPAR apart from the polling "snooze" state.
The platform might support additional extended CEDE idle states, which
can be discovered through the "ibm,get-system-parameter" rtas-call
made with CEDE_LATENCY_TOKEN.
This patch adds a function to obtain information about the extended
CEDE idle states from the platform and parse the contents to populate
an array of extended CEDE states. These idle states thus discovered
will be added to the cpuidle framework in the next patch.
dmesg on a POWER8 and POWER9 LPAR, demonstrating the output of parsing
the extended CEDE latency parameters are as follows
POWER8
[ 10.093279] xcede : xcede_record_size = 10
[ 10.093285] xcede : Record 0 : hint = 1, latency = 0x3c00 tb ticks, Wake-on-irq = 1
[ 10.093291] xcede : Record 1 : hint = 2, latency = 0x4e2000 tb ticks, Wake-on-irq = 0
[ 10.093297] cpuidle : Skipping the 2 Extended CEDE idle states
POWER9
[ 5.913180] xcede : xcede_record_size = 10
[ 5.913183] xcede : Record 0 : hint = 1, latency = 0x400 tb ticks, Wake-on-irq = 1
[ 5.913188] xcede : Record 1 : hint = 2, latency = 0x3e8000 tb ticks, Wake-on-irq = 0
[ 5.913193] cpuidle : Skipping the 2 Extended CEDE idle states
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
[mpe: Make space for 16 records, drop memset, minor cleanup & formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596087177-30329-3-git-send-email-ego@linux.vnet.ibm.com
|
|
As per the PAPR, each H_CEDE call is associated with a latency-hint to
be passed in the VPA field "cede_latency_hint". The CEDE states that
we were implicitly entering so far is CEDE with latency-hint = 0.
This patch explicitly sets the latency hint corresponding to the CEDE
state that we are currently entering. While at it, we save the
previous hint, to be restored once we wakeup from CEDE. This will be
required in the future when we expose extended-cede states through the
cpuidle framework, where each of them will have a different
cede-latency hint.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
[mpe: Make cede_latency_hint static]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596087177-30329-2-git-send-email-ego@linux.vnet.ibm.com
|
|
Control Flow Integrity(CFI) is a security mechanism that disallows
changes to the original control flow graph of a compiled binary,
making it significantly harder to perform such attacks.
init_state_node() assign same function callback to different
function pointer declarations.
static int init_state_node(struct cpuidle_state *idle_state,
const struct of_device_id *matches,
struct device_node *state_node) { ...
idle_state->enter = match_id->data; ...
idle_state->enter_s2idle = match_id->data; }
Function declarations:
struct cpuidle_state { ...
int (*enter) (struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index);
void (*enter_s2idle) (struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index); };
In this case, either enter() or enter_s2idle() would cause CFI check
failed since they use same callee.
Align function prototype of enter() since it needs return value for
some use cases. The return value of enter_s2idle() is no
need currently.
Signed-off-by: Neal Liu <neal.liu@mediatek.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Depending on the SoC/platform, additional devices may be part of the PSCI
PM domain topology. This is the case with 'qcom,rpmh-rsc' device, for
example, even if this is not yet visible in the corresponding DTS-files.
Without going into too much details, a device like the 'qcom,rpmh-rsc' may
have HW constraints that needs to be obeyed to, before a domain idlestate
can be picked.
Therefore, let's implement the ->sync_state() callback to receive a
notification when all consumers of the PSCI PM domain providers have been
attached/probed to it. In this way, we can make sure all constraints from
all relevant devices, are taken into account before allowing a domain
idlestate to be picked.
Acked-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To enable support for deferred probing and to allow implementation of the
->sync_state() callback from subsequent changes, let's convert into a
platform driver.
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The current error paths for the cpuidle-psci driver, may leak memory or
possibly leave CPU devices attached to their PM domains. These are quite
harmless issues, but still deserves to be taken care of.
Although, rather than fixing them by keeping track of allocations that
needs to be freed, which tends to become a bit messy, let's convert into a
platform driver. In this way, it gets easier to fix the memory leaks as we
can rely on the devm_* functions.
Moreover, converting to a platform driver also enables support for deferred
probe, which subsequent changes takes benefit from.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently we allow the cpuidle driver registration to succeed, even if we
failed to enable the OSI mode when the hierarchical DT layout is used. This
means running in a degraded mode, by using the available idle states per
CPU, while also preventing the domain idle states.
Moving forward, this behaviour looks quite questionable to maintain, as
complexity seems to grow around it, especially when trying to add support
for deferred probe, for example.
Therefore, let's make the cpuidle driver registration to fail in this
situation, thus relying on the default architectural cpuidle backend for
WFI to be used.
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The combined build object for the PSCI cpuidle driver and the PSCI PM
domain, is a bit messy. Therefore let's split it up by adding a new Kconfig
ARM_PSCI_CPUIDLE_DOMAIN and convert into two separate objects.
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The sparse tool complains as follows:
drivers/cpuidle/cpuidle-pseries.c:25:23: warning:
symbol 'pseries_idle_driver' was not declared. Should it be static?
'pseries_idle_driver' is not used outside of this file, so marks
it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200714142424.66648-1-weiyongjun1@huawei.com
|
|
Commit 1961acad2f88559c2cdd2ef67c58c3627f1f6e54 removes usage of
function "validate_dt_prop_sizes". This patch removes this unused
function.
Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200706053258.121475-1-huntbag@linux.vnet.ibm.com
|
|
Implement call_cpuidle_s2idle() in analogy with call_cpuidle()
for the s2idle-specific idle state entry and invoke it from
cpuidle_idle_call() to make the s2idle-specific idle entry code
path look more similar to the "regular" idle entry one.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Chen Yu <yu.c.chen@intel.com>
|
|
Suspend to idle was found to not work on Goldmont CPU recently.
The issue happens due to:
1. On Goldmont the CPU in idle can only be woken up via IPIs,
not POLLING mode, due to commit 08e237fa56a1 ("x86/cpu: Add
workaround for MONITOR instruction erratum on Goldmont based
CPUs")
2. When the CPU is entering suspend to idle process, the
_TIF_POLLING_NRFLAG remains on, because cpuidle_enter_s2idle()
doesn't match call_cpuidle() exactly.
3. Commit b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
makes use of _TIF_POLLING_NRFLAG to avoid sending IPIs to idle
CPUs.
4. As a result, some IPIs related functions might not work
well during suspend to idle on Goldmont. For example, one
suspected victim:
tick_unfreeze() -> timekeeping_resume() -> hrtimers_resume()
-> clock_was_set() -> on_each_cpu() might wait forever,
because the IPIs will not be sent to the CPUs which are
sleeping with _TIF_POLLING_NRFLAG set, and Goldmont CPU
could not be woken up by only setting _TIF_NEED_RESCHED
on the monitor address.
To avoid that, clear the _TIF_POLLING_NRFLAG flag before invoking
enter_s2idle_proper() in cpuidle_enter_s2idle() in analogy with the
call_cpuidle() code flow.
Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject / changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add the hwmon support on the i.MX SC (Anson Huang)
- Thermal framework cleanups (self-encapsulation, pointless stubs,
private structures) (Daniel Lezcano)
- Use the PM QoS frequency changes for the devfreq cooling device
(Matthias Kaehlcke)
- Remove duplicate error messages from platform_get_irq() error
handling (Markus Elfring)
- Add support for the bandgap sensors (Keerthy)
- Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)
- Add Renesas R-Car maintainer entry (Niklas Söderlund)
- Fix error checking after calling ti_bandgap_get_sensor_data() for the
TI SoC thermal (Sudip Mukherjee)
- Add latency constraint for the idle injection, the DT binding and the
change the registering function (Daniel Lezcano)
- Convert the thermal framework binding to the Yaml schema (Amit
Kucheria)
- Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A.
R. Silva)
- Thermal framework cleanups (alphabetic order for heads, replace
module.h by export.h, make file naming consistent) (Amit Kucheria)
- Merge tsens-common into the tsens driver (Amit Kucheria)
- Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)
- Clean up the rcar_thermal_update_temp() function in the rcar thermal
driver (Niklas Söderlund)
- Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian
Tang)
- Export GDDV, OEM vendor variables, and don't require IDSP for the
int340x thermal driver - trivial conflicts fixed (Matthew Garrett)
* tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits)
thermal/int340x_thermal: Don't require IDSP to exist
thermal/int340x_thermal: Export OEM vendor variables
thermal/int340x_thermal: Export GDDV
thermal: qoriq: Update the settings for TMUv2
thermal: rcar_thermal: Clean up rcar_thermal_update_temp()
thermal: qoriq: Add platform dependencies
drivers: thermal: tsens: Merge tsens-common.c into tsens.c
thermal/of: Rename of-thermal.c
thermal/governors: Prefix all source files with gov_
thermal/drivers/user_space: Sort headers alphabetically
thermal/drivers/of-thermal: Sort headers alphabetically
thermal/drivers/cpufreq_cooling: Replace module.h with export.h
thermal/drivers/cpufreq_cooling: Sort headers alphabetically
thermal/drivers/clock_cooling: Include export.h
thermal/drivers/clock_cooling: Sort headers alphabetically
thermal/drivers/thermal_hwmon: Include export.h
thermal/drivers/thermal_hwmon: Sort headers alphabetically
thermal/drivers/thermal_helpers: Include export.h
thermal/drivers/thermal_helpers: Sort headers alphabetically
thermal/core: Replace module.h with export.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
|
|
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Previous commit "b8eb718348b8" fixed a similar problem.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Qualcomm SPM cpuidle driver seems to be the last driver still
using the generic ARM CPUidle infrastructure.
Converting it actually allows us to simplify the driver,
and we end up being able to remove more lines than adding new ones:
- We can parse the CPUidle states in the device tree directly
with dt_idle_states (and don't need to duplicate that
functionality into the spm driver).
- Each "saw" device managed by the SPM driver now directly
registers its own cpuidle driver, removing the need for
any global (per cpu) state.
The device tree binding is the same, so the driver stays
compatible with all old device trees.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since the cpuidle governor can be switched via sysfs in default,
remove sysfs_switch and cpuidle_switch_attrs.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For now cpuidle governor can be switched via sysfs only when the
boot option "cpuidle_sysfs_switch" is passed, but it's important
to switch the governor to adapt to different workloads, especially
after TEO and haltpoll governor were introduced.
Add available_governors and current_governor into the default
attributes, but reserve the current_governor_ro for compatiblity.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
CPUIDLE_NAME_LEN is 16, so it's possible to accept governor name
with 15 characters, but now store_current_governor() rejects
governor name with 15 characters as it returns -EINVAL if count
equals CPUIDLE_NAME_LEN.
Refactor the code to accept such case and simplify the code.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When showing the available governors, it's "%s " in scnprintf(),
not "%s", so if the governor name has 15 characters, it will
overlap with the later one, fix it by adding one more for the
size.
While we are at it, fix the minor coding style issue and remove
the "/sizeof(char)" since sizeof(char) always equals 1.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The cpuidle driver can be used as a cooling device by injecting idle
cycles.
When the property is set, register the cpuidle driver with the idle
state node pointer as a cooling device. The thermal framework will do
the association automatically with the thermal zone via the
cooling-device defined in the device tree cooling-maps section.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200429103644.5492-4-daniel.lezcano@linaro.org
|
|
Moving forward, platforms are going to need to execute specific "last-man"
operations before a domain idle state can be entered. In one way or the
other, these operations needs to be triggered while walking the
hierarchical topology via runtime PM and genpd, as it's at that point the
last-man becomes known.
Moreover, executing last-man operations needs to be done after the CPU PM
notifications are sent through cpu_pm_enter(), as otherwise it's likely
that some notifications would fail. Therefore, let's re-order the sequence
in psci_enter_domain_idle_state(), so cpu_pm_enter() gets called prior
pm_runtime_put_sync().
Fixes: ce85aef570df ("cpuidle: psci: Manage runtime PM in the idle path")
Reported-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The new Tegra CPU Idle driver now has a unified code path for the coupled
CC6 (LP2) state, this allows to enable the deepest idling state on Tegra30
SoC where the whole CPU cluster is power-gated.
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Currently when CPU goes idle, we take a snapshot of PURR via
pseries_idle_prolog() which is used at the CPU idle exit to compute
the idle PURR cycles via the function pseries_idle_epilog(). Thus,
the value of idle PURR cycle thus read before pseries_idle_prolog() and
after pseries_idle_epilog() is always correct.
However, if we were to read the idle PURR cycles from an interrupt
context between pseries_idle_prolog() and pseries_idle_epilog() (this
will be done in a future patch), then, the value of the idle PURR thus
read will not include the cycles spent in the most recent idle period.
Thus, in that interrupt context, we will need access to the snapshot
of the PURR before going idle, in order to compute the idle PURR
cycles for the latest idle duration.
In this patch, we save the snapshot of PURR in pseries_idle_prolog()
in a per-cpu variable, instead of on the stack, so that it can be
accessed from an interrupt context.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1586249263-14048-3-git-send-email-ego@linux.vnet.ibm.com
|
|
Currently prior to entering an idle state on a Linux Guest, the
pseries cpuidle driver implement an idle_loop_prolog() and
idle_loop_epilog() functions which ensure that idle_purr is correctly
computed, and the hypervisor is informed that the CPU cycles have been
donated.
These prolog and epilog functions are also required in the default
idle call, i.e pseries_lpar_idle(). Hence move these accessor
functions to a common header file and call them from
pseries_lpar_idle(). Since the existing header files such as
asm/processor.h have enough clutter, create a new header file
asm/idle.h. Finally rename idle_loop_prolog() and idle_loop_epilog()
to pseries_idle_prolog() and pseries_idle_epilog() as they are only
relavent for on pseries guests.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1586249263-14048-2-git-send-email-ego@linux.vnet.ibm.com
|
|
Fix two minor coding style issues.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The define_one_ro and define_one_rw macros are not used,
remove it.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* pm-cpuidle:
cpuidle-haltpoll: Fix small typo
|
|
Fix a spelling typo in cpuidle-haltpoll.c.
Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull ARM SoC updates from Arnd Bergmann:
"The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including cpuidle,
pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms"
* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
ARM: qcom: Add support for IPQ40xx
ARM: mmp: replace setup_irq() by request_irq()
ARM: cns3xxx: replace setup_irq() by request_irq()
ARM: spear: replace setup_irq() by request_irq()
ARM: ep93xx: Replace setup_irq() by request_irq()
ARM: iop32x: replace setup_irq() by request_irq()
arm: mach-dove: Mark dove_io_desc as __maybe_unused
ARM: orion: replace setup_irq() by request_irq()
ARM: debug: stm32: add UART early console support for STM32MP1
ARM: debug: stm32: add UART early console support for STM32H7
ARM: debug: stm32: add UART early console configuration for STM32F7
ARM: debug: stm32: add UART early console configuration for STM32F4
cpuidle: tegra: Disable CC6 state if LP2 unavailable
cpuidle: tegra: Squash Tegra114 driver into the common driver
cpuidle: tegra: Squash Tegra30 driver into the common driver
cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
ARM: tegra: cpuidle: Remove unnecessary memory barrier
ARM: tegra: cpuidle: Make abort_flag atomic
ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
ARM: tegra: Make outer_disable() open-coded
...
|
|
* pm-core:
PM: runtime: Add pm_runtime_get_if_active()
* pm-sleep:
PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there
PM / hibernate: Remove unnecessary compat ioctl overrides
PM: hibernate: fix docs for ioctls that return loff_t via pointer
PM: sleep: wakeup: Use built-in RCU list checking
PM: sleep: core: Use built-in RCU list checking
* pm-acpi:
ACPI: PM: s2idle: Refine active GPEs check
ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE
ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late()
* pm-domains:
cpuidle: psci: Split psci_dt_cpu_init_idle()
PM / Domains: Allow no domain-idle-states DT property in genpd when parsing
|
|
* pm-cpuidle:
cpuidle: haltpoll: allow force loading on hosts without the REALTIME hint
intel_idle: Update copyright notice, known limitations and version
intel_idle: Define CPUIDLE_FLAG_TLB_FLUSHED as BIT(16)
intel_idle: Clean up kerneldoc comments for multiple functions
intel_idle: Reorder declarations of static variables
intel_idle: Annotate init time data structures
intel_idle: Add __initdata annotations to init time variables
intel_idle: Relocate definitions of cpuidle callbacks
intel_idle: Clean up definitions of cpuidle callbacks
intel_idle: Simplify LAPIC timer reliability checks
|
|
To make the code a bit more readable, let's move the OSI specific
initialization out of the psci_dt_cpu_init_idle() and into a separate
function.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Before commit 1328edca4a14 ("cpuidle-haltpoll: Enable kvm guest polling
when dedicated physical CPUs are available") the cpuidle-haltpoll driver
could also be used in scenarios when the host does not advertise the
KVM_HINTS_REALTIME hint.
While the behavior introduced by the aforementioned commit makes sense as
the default there are cases where the old behavior is desired, for example,
when other kernel changes triggered by presence by this hint are unwanted,
for some workloads where the latency benefit from polling overweights the
loss from idle CPU capacity that otherwise would be available, or just when
running under older Qemu versions that lack this hint.
Let's provide a typical "force" module parameter that allows restoring the
old behavior.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
LP2 suspending could be unavailable, for example if it is disabled in a
device-tree. CC6 cpuidle state won't work in that case.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra20/30/114/124 SoCs have common idling states, thus there is no much
point in having separate drivers for a similar hardware. This patch moves
Tegra114/124 arch/ drivers into the common driver without any functional
changes. The CC6 state is kept disabled on Tegra114/124 because the core
Tegra PM code needs some more work in order to support that state.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra20 and Terga30 SoCs have common C1 and CC6 idling states and thus
share the same code paths, there is no point in having separate drivers
for a similar hardware. This patch merely moves functionality of the old
driver into the new, although the CC6 state is kept disabled for now since
old driver had a rudimentary support for this state (allowing to enter
into CC6 only when secondary CPUs are put offline), while new driver can
provide a full-featured support. The new feature will be enabled by
another patch.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The driver's code is refactored in a way that will make it easy to
support Tegra30/114/124 SoCs by this unified driver later on. The
current functionality is equal to the old Tegra20 driver, only the
code's structure changed a tad. This is also a proper platform driver
now.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Call cpu_latency_qos_limit() instead of pm_qos_request(), because the
latter is going to be dropped.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
