| Age | Commit message (Collapse) | Author |
|---|
|
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
This was previously done in commit b5c75b68b7de ("comedi: add HAS_IOPORT
dependencies"), but that has been reverted because it made it impossible
to select configuration options for several comedi drivers. This is a
do-over that avoids that.
Since the original patch, modifications have been made to various comedi
modules so that they can still be built even if the port I/O functions
have not been declared, so the configuration options for building those
modules no longer need to depend on HAS_IOPORT.
Make the COMEDI_ISA_DRIVERS menu option (which allows configuration
options for ISA and PC/104 drivers to be selected) depend on HAS_IOPORT,
and also depend on ISA || ISA_BUS || PC104.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Co-developed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-14-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The amplc_dio200_common module is used by the amplc_dio200 module (for
ISA cards) and the amplc_dio200_pci module (for PCI and PCI Express
cards). It supports both port I/O and memory-mapped I/O.
Port I/O and memory-mapped I/O is confined to the `dio200___read8()`,
`dio200___read32()`, `dio200___write8()` and `dio200___write32()`
functions. Conditionally compile two versions of those functions. If
the `CONFIG_HAS_IOPORT` macro is defined, call either the port I/O or
memory mapped I/O functions depending on the `mmio` member of the
`struct comedi_device`. If the `CONFIG_HAS_IOPORT` macro is undefined
only call the memory-mapped I/O functions.
Add a run-time check to `amplc_dio200_common_attach()` to return an
error if the device wants to use port I/O when the `CONFIG_HAS_IOPORT`
macro is undefined.
The changes allow the module to be built even if the port I/O functions
have not been declared.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-13-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The `dio200_read8()`, `dio200_write8()`, `dio200_read32()` and
`dio200_write32()` functions apply a right-shift to the register offset
for some devices and then perform the actual register access. Factor
the register access part out to new functions `dio200___read8()`,
`dio200___write8()`, `dio200___read32()`, and `dio200___write32()`.
This will reduce duplicated code in a subsequent patch that will
conditionally compile support for port I/O as part of the `HAS_IOPORT`
changes.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-12-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The amplc_dio200_pci module supports various Amplicon PCI and PCI
Express devices. Some of the supported devices (the PCI ones) use port
I/O, and some of them (the PCIe ones) only use memory-mapped I/O.
Conditionally compile in support for the devices that need port I/O if
and only if the `CONFIG_HAS_IOPORT` macro is defined.
Add a run-time check in `dio200_pci_auto_attach()` to return an error if
the device actually requires port I/O (based on the PCI BAR resource
flags) but the `HAS_IOPORT` configuration option is not enabled.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-11-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The "ni_mio_common.c" file contains calls to both port I/O functions and
memory-mapped I/O functions. The file is `#include`d by "ni_atmio.c",
"ni_mio_cs.c", and "ni_pcimio.c" for the ni_atmio, ni_mio_cs, and
ni_pcimio modules, respectively. Only "ni_pcimio.c" defines the
`PCIDMA` macro before including "ni_mio_common.c" and various bits of
code in "ni_mio_common.c" is conditionally compiled according to whether
that macro is defined or not. Currently, the port I/O function calls
are compiled in regardless of whether the `PCIDMA` macro is defined or
not. However, the fact is that the ni_atmio and ni_mio_cs modules will
never call the memory-mapped I/O functions, and the ni_pcimio module
will never call the port I/O functions.
Calls to the port I/O and memory-mapped I/O functions is confined to the
`ni_writel()`, `ni_writew()`, `ni_writeb()`, `ni_readl()`, `ni_readw()`,
and `ni_readb()` functions which do a run-time test to decide whether to
call the port I/O functions or the memory-mapped I/O functions.
Conditionally compile two variants of the functions so they only call
the port I/O functions if the `PCIDMA` macro is undefined (for the
ni_atmio and ni_mio_cs modules), and only call the memory-mapped I/O
functions if the `PCIDMA` macro is defined (for the ni_pcimio module).
Add a run-time check in the `ni_E_init()` function to return an error if
the comedi device has been set up to use port I/O if `PCIDMA` is
defined, or has been set up to use memory-mapped I/O if `PCIDMA` is not
defined.
The changes make it possible to build the ni_pcimio module even if the
port I/O functions have not been declared. (The ni_atmio and ni_mio_cs
modules do still require the port I/O functions to be declared.)
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-10-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The ni_labpc_common module is used by the ni_labpc module (for ISA
cards), the ni_labpc_cs module (for PCMCIA cards), and the ni_labpc_pci
module (for PCI cards). The ISA and PCMCIA cards use port I/O and the
PCI cards use memory-mapped I/O.
Conditionally compile the parts of the module that use the port I/O
functions so they are compiled if and only if the `CONFIG_HAS_IOPORT`
macro is defined, so that the module can be built if the port I/O
functions have not been declared.
Add a run-time check in the `labpc_common_attach()` to return an error
if the comedi device wants to use port I/O when the `CONFIG_HAS_IOPORT`
macro is undefined.
The changes allow the module to be built even if the port I/O functions
have not been declared.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-9-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The comedi_8255 module supports both port I/O and memory-mapped I/O.
Conditionally compile the parts of the module that use port I/O if and
only if the `CONFIG_HAS_IOPORT` macro is defined so that it can still be
built if the port I/O functions have not been declared. If the
`CONFIG_HAS_IOPORT` macro is undefined, replace the GPL-exported
`subdev_8255_io_init()` function with a dummy static inline version that
just returns `-ENXIO`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-8-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Comedi drivers can initialize an 8255 subdevice in I/O space by calling
`subdev_8255_init()`, or in memory-mapped I/O space by calling
`subdev_8255_mm_init()`, or by supplying a call-back function pointer
and context to either of those functions. Change it so that a new
function `subdev_8255_cb_init()` shall be called instead when supplying
a callback function and context, and remove the call-back function
parameter from `subdev_8255_init()` and `subdev_8255_mm_init()`.
Also rename `subdev_8255_init()` to `subdev_8255_io_init()`. The
parameters are changing, so might as well rename it at the same time.
Also rename the `regbase` member of `struct subdev_8255_private` to
`context` since this holds the context for the call-back function call.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-7-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The 8255_pci module supports PCI digital I/O devices from various
manufacturers that consist of one or more 8255 Programmable Peripheral
Interface chips (or equivalent hardware) to provide their digital I/O
ports. Some of the devices use port I/O and some only use memory-mapped
I/O.
Conditionally compile in support for the devices that need port I/O if
and only if the `CONFIG_HAS_IOPORT` macro is defined. Change
`pci_8255_auto_attach()` to return an error if the device actually
requires port I/O (based on the PCI BAR resource flags) but the
`HAS_IOPORT` configuration is not enabled.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-6-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The comedi_8254 module supports both port I/O and memory-mapped I/O.
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends) will only be declared if the `HAS_IOPORT` configuration option
is enabled.
Conditionally compile the parts of the module that use port I/O so they
are compiled if and only if the `CONFIG_HAS_IOPORT` macro is defined, so
that it can still be built if the port I/O functions have not been
declared. If `CONFIG_HAS_IOPORT` is undefined, replace the GPL-exported
`comedi_8254_io_alloc()` function with a dummy static inline version
that just returns `ERR_PTR(-ENXIO)`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
`comedi_8254_init()` and `comedi_8254_mm_init()` return `NULL` on
failure, but the failure is not necessarily due to lack of memory.
Change them to return an `ERR_PTR` value on failure and rename the
functions to make it obvious the API has changed. `comedi_8254_init()`
has been replaced with `comedi_8254_io_alloc()`, and
`comedi_8254_mm_init()` has been replaced with `comedi_8254_mm_alloc()`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-4-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rework the comedi_8254 module to use a call-back function for register
access. This will make it easier to isolate the parts that will depend
on the `CONFIG_HAS_IOPORT` macro being defined and also allows the
possibility of supplying an external callback function during
initialization by a variant of the `comedi_8254_init()` and
`comedi_8254_mm_init()` functions, although that has not been
implemented yet.
The `struct comedi_8254` members have been changed to use a pointer to a
callback function and a context of type `unsigned long`. The
`comedi_8254_init()` and `comedi_8254_mm_init()` functions use an
internal callback function and set the context to the base address of
the registers (for `comedi_8254_mm_init()` that involves converting a
`void __iomem *` to `unsigned long`).
A minor change to `dio200_subdev_8254_offset()` in the
amplc_dio200_common module has been made due to the changes in `struct
comedi_8254`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ni_pcidio module does not depend on the comedi_8255 module, so
change the `COMEDI_NI_PCIDIO` configuration option to not select
`COMEDI_8255` and remove the inherited dependency on `HAS_IOPORT`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit b5c75b68b7ded84d4c82118974ce3975a4dcaa74.
The commit makes it impossible to select configuration options that
depend on COMEDI_8254, COMEDI_DAS08, COMEDI_NI_LABPC, or
COMEDI_AMPLC_DIO200 options due to changing 'select' directives to
'depends on' directives and there being no other way to select those
codependent configuration options.
Fixes: b5c75b68b7de ("comedi: add HAS_IOPORT dependencies")
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: <stable@vger.kernel.org> # v6.5+
Acked-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230905090922.3314-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Ivan Orlov <ivan.orlov0322@gmail.com>
Cc: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620144137.581406-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230522105049.1467313-7-schnelle@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the char/misc driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
(Actually, this is fixing the "Read the Current Status" command sent to
the device's outgoing mailbox, but it is only currently used for the PWM
instructions.)
The PCI-1760 is operated mostly by sending commands to a set of Outgoing
Mailbox registers, waiting for the command to complete, and reading the
result from the Incoming Mailbox registers. One of these commands is
the "Read the Current Status" command. The number of this command is
0x07 (see the User's Manual for the PCI-1760 at
<https://advdownload.advantech.com/productfile/Downloadfile2/1-11P6653/PCI-1760.pdf>.
The `PCI1760_CMD_GET_STATUS` macro defined in the driver should expand
to this command number 0x07, but unfortunately it currently expands to
0x03. (Command number 0x03 is not defined in the User's Manual.)
Correct the definition of the `PCI1760_CMD_GET_STATUS` macro to fix it.
This is used by all the PWM subdevice related instructions handled by
`pci1760_pwm_insn_config()` which are probably all broken. The effect
of sending the undefined command number 0x03 is not known.
Fixes: 14b93bb6bbf0 ("staging: comedi: adv_pci_dio: separate out PCI-1760 support")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230103143754.17564-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Comedi INSN_CONFIG instructions have different expected instructtion
data lengths depending on the type of configuration instruction
specified by the first word of data. This is checked by
`check_insn_config_length()`. There are a few configuration
instructions whose data lengths are not currently checked, usually for
rare configuration instructions that are implemented differently by
different drivers. For unknown configuration instructions, the function
logs a warning and accepts the specified data length.
The `INSN_CONFIG_GET_PWM_OUTPUT` configuration instruction length is not
currently checked, but all the places it is currently used expect a data
length of 3. (These places are `ni_get_pwm_config()` in
"ni_mio_common.c", and `pci1760_pwm_insn_config()` in "adv_pci1760.c".)
Make this length official by checking it in
`check_insn_config_length()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230103151127.19287-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Bring the Comedi menu in line with most other device drivers
by using "menuconfig" instead of "config" for the top-level entry.
This also fixes a menu presentation issue with xconfig.
Fixes: ed9eccbe8970 ("Staging: add comedi core")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David Schleef <ds@schleef.org>
Cc: Shawn Bohrer <shawn.bohrer@gmail.com>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230110064844.18533-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Follow the advice of the Documentation/filesystems/sysfs.rst
and show() should only use sysfs_emit() or sysfs_emit_at()
when formatting the value to be returned to user space.
Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Link: https://lore.kernel.org/r/20220901013423.418464-1-zhangxuezhi3@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Consolidate duplicated 'next function' scanning and extend to allow
'isolated functions' on s390, similar to existing hypervisors
(Niklas Schnelle)
Resource management:
- Implement pci_iobar_pfn() for sparc, which allows us to remove the
sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().
This removes the ability to map the entire PCI I/O space using
/proc/bus/pci, but we believe that's already been broken since
v2.6.28 (Arnd Bergmann)
- Move common PCI definitions to asm-generic/pci.h and rework others
to be be more specific and more encapsulated in arches that need
them (Stafford Horne)
Power management:
- Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)
Virtualization:
- Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
the functions but don't advertise an ACS capability (Pavan Chebbi)
Error handling:
- Clear PCI Status register during enumeration in case firmware left
errors logged (Kai-Heng Feng)
- When we have native control of AER, enable error reporting for all
devices that support AER. Previously only a few drivers enabled
this (Stefan Roese)
- Keep AER error reporting enabled for switches. Previously we
enabled this during enumeration but immediately disabled it (Stefan
Roese)
- Iterate over error counters instead of error strings to avoid
printing junk in AER sysfs counters (Mohamed Khalfella)
ASPM:
- Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
via sysfs, are not lost across power state changes (Kai-Heng Feng)
Endpoint framework:
- Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)
Endpoint embedded DMA controller driver:
- Simplify and clean up support for the DesignWare embedded DMA
(eDMA) controller (Frank Li, Serge Semin)
Broadcom STB PCIe controller driver:
- Avoid config space accesses when link is down because we can't
recover from the CPU aborts these cause (Jim Quinlan)
- Look for power regulators described under Root Ports in DT and
enable them before scanning the secondary bus (Jim Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Simplify and clean up clock and PHY management (Richard Zhu)
- Disable/enable regulators in suspend/resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
- Make link being down a non-fatal error so controller probe doesn't
fail if there are no Endpoints connected (Richard Zhu)
Loongson PCIe controller driver:
- Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)
- Avoid config reads to non-existent LS2K/LS7A devices because a
hardware defect causes machine hangs (Huacai Chen)
- Work around LS7A integrated devices that report incorrect Interrupt
Pin values (Jianmin Lv)
Marvell Aardvark PCIe controller driver:
- Add support for AER and Slot capability on emulated bridge (Pali
Rohár)
MediaTek PCIe controller driver:
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of driver for ARCH_AIROHA (Felix Fietkau)
MediaTek PCIe Gen3 controller driver:
- Print decoded LTSSM state when the link doesn't come up (Jianjun
Wang)
NVIDIA Tegra194 PCIe controller driver:
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and
Endpoint mode (Vidya Sagar)
- Fix some Root Port interrupt handling issues (Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix Data Link Feature capability programming (Vidya Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Rework clock, reset, PHY power-on ordering to avoid hangs and
improve consistency (Robert Marko, Christian Marangi)
- Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
- Add support for more than 32 MSI interrupts (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Convert DT binding to json-schema (Herve Codina)
- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
(Herve Codina)
Samsung Exynos PCIe controller driver:
- Fix phy-exynos-pcie driver so it follows the 'phy_init() before
phy_power_on()' PHY programming model (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Simplify and clean up the DWC core extensively (Serge Semin)
- Fix an issue with programming the ATU for regions that cross a 4GB
boundary (Serge Semin)
- Enable the CDM check if 'snps,enable-cdm-check' exists; previously
we skipped it if 'num-lanes' was absent (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit
address (Will McVicker)
- Add DWC core support for more than 32 MSI interrupts (Dmitry
Baryshkov)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port
(Bharat Kumar Gogada)"
* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
...
|
|
The isa_dma_bridge_buggy symbol is only used for x86_32, and only x86_32
platforms or quirks ever set it.
Add a new linux/isa-dma.h header that #defines isa_dma_bridge_buggy to 0
except on x86_32, where we keep it as a variable, and remove all the arch-
specific definitions.
[bhelgaas: commit log]
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/r/20220722214944.831438-3-shorne@gmail.com
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The expression for setting the size of the allocated bulk TX buffer
(`devpriv->usb_tx_buf`) is calling `usb_endpoint_maxp(devpriv->ep_rx)`,
which is using the wrong endpoint (should be `devpriv->ep_tx`). Fix it.
Fixes: a23461c47482 ("comedi: vmk80xx: fix transfer-buffer overflow")
Cc: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org # 4.9+
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20220607171819.4121-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following coccicheck warning:
drivers/comedi/drivers.c:857:12-13: WARNING opportunity for min().
min() macro is defined in include/linux/minmax.h. It avoids multiple
evaluations of the arguments when non-constant and performs strict
type-checking.
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220513071608.49047-1-guozhengkui@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The family and device comparisons were using memcmp(), but this could
lead to Out-of-bounds reads when the length was larger than the
buffers being compared. Since these appear to always be NUL-terminated
strings, just use strcmp() instead.
This was found with Clang under LTO:
[ 92.405851][ T1] kernel BUG at lib/string_helpers.c:980!
...
[ 92.409141][ T1] RIP: 0010:fortify_panic (fbdev.c:?)
...
[ 92.410056][ T1] ni_assign_device_routes (fbdev.c:?)
[ 92.410056][ T1] ? unittest_enter (fbdev.c:?)
[ 92.410056][ T1] ni_routes_unittest (ni_routes_test.c:?)
[ 92.410056][ T1] ? unittest_enter (fbdev.c:?)
[ 92.410056][ T1] __initstub__kmod_ni_routes_test__505_604_ni_routes_unittest6 (fbdev.c:?)
[ 92.410056][ T1] do_one_initcall (fbdev.c:?)
Link: https://lore.kernel.org/lkml/20220210072821.GD4074@xsang-OptiPlex-9020
Fixes: 4bb90c87abbe ("staging: comedi: add interface to ni routing table information")
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Spencer E. Olson <olsonse@umich.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220215171017.1247291-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Variable buffer_config is being assigned a value that is never read, it
is being re-assigned later on. The assignment is redundant and can be
removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220130232910.9313-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Also, address the following sparse warnings:
drivers/comedi/drivers/das16.c:964:45: warning: using sizeof on a flexible structure
drivers/comedi/drivers/das16.c:998:45: warning: using sizeof on a flexible structure
Link: https://github.com/KSPP/linux/issues/174
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20220125232525.GA80228@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some of the header files in "drivers/comedi/drivers/" are common enough
to be useful to out-of-tree comedi driver modules. Using them for
out-of-tree module builds is hampered by the headers being outside the
"include/" directory so it is desirable to move them.
There are about a half a dozen or so Comedi device drivers that use the
"comedi_isadma" module to add ISA DMA support. The macros and
declarations to use that module are in the "comedi_isadma.h" header file
in the comedi "drivers" directory. Move it into
"include/linux/comedi/".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211117120604.117740-6-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some of the header files in "drivers/comedi/drivers/" are common enough
to be useful to out-of-tree comedi driver modules. Using them for
out-of-tree module builds is hampered by the headers being outside the
"include/" directory so it is desirable to move them.
There are about a couple of dozen or so Comedi device drivers that use
the "comedi_8254" module to add timers based on the venerable 8254
Programmable Interval Timer chip. The macros and declarations to use
that module are in the "comedi_8254.h" header file in the comedi
"drivers" directory. Move it into "include/linux/comedi/".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211117120604.117740-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some of the header files in "drivers/comedi/drivers/" are common enough
to be useful to out-of-tree comedi driver modules. Using them for
out-of-tree module builds is hampered by the headers being outside the
"include/" directory so it is desirable to move them.
There are about a couple of dozen Comedi device drivers that use the
"comedi_8255" module to add digital I/O subdevices based on the
venerable 8255 Programmable Peripheral Interface chip. The macros and
declarations to use that module are in the "8255.h" header file in the
comedi "drivers" directory. Move it into "include/linux/comedi/" and
rename it to "comedi_8255.h" for naming consistency reasons.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211117120604.117740-4-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Building of the tools for converting the NI routing information between
CSV files (for maintenance) and C files (for building) was broken by the
move of the main COMEDI header files to "include/uapi/linux/" and
"include/linux/". (These tools are not built as part of the normal
kernel build process.) Fix it in the Makefile.
A slight niggle is that `#include <linux/comedi.h>` needs to work when
compiling the `convert_c_to_py` program, but it cannot use a `-I` option
referring to the "uapi" include directory because that interferes with
inclusion of other system headers. So it uses `-I.` and makes a local
copy (actually a symbolic link) as "./linux/comedi.h".
Also remove some unneeded cruft such as the `-D"BIT(x)=(1<<(x))"`
preprocessor flag.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211117120604.117740-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the main COMEDI driver headers out of "drivers/comedi/" into new
directory "include/linux/comedi/". These are "comedidev.h",
"comedilib.h", "comedi_pci.h", "comedi_pcmcia.h", and "comedi_usb.h".
Additionally, move the user-space API header "comedi.h" into
"include/uapi/linux/" and add "WITH Linux-syscall-note" to its
SPDX-License-Identifier.
Update the "COMEDI DRIVERS" section of the MAINTAINERS file to account
for these changes.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211117120604.117740-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
USB transfer buffers are typically mapped for DMA and must not be
allocated on the stack or transfers will fail.
Allocate proper transfer buffers in the various command helpers and
return an error on short transfers instead of acting on random stack
data.
Note that this also fixes a stack info leak on systems where DMA is not
used as 32 bytes are always sent to the device regardless of how short
the command is.
Fixes: 63274cd7d38a ("Staging: comedi: add usb dt9812 driver")
Cc: stable@vger.kernel.org # 2.6.29
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211027093529.30896-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver uses endpoint-sized USB transfer buffers but had no sanity
checks on the sizes. This can lead to zero-size-pointer dereferences or
overflowed transfer buffers in ni6501_port_command() and
ni6501_counter_command() if a (malicious) device has smaller max-packet
sizes than expected (or when doing descriptor fuzz testing).
Add the missing sanity checks to probe().
Fixes: a03bb00e50ab ("staging: comedi: add NI USB-6501 support")
Cc: stable@vger.kernel.org # 3.18
Cc: Luca Ellero <luca.ellero@brickedbrain.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211027093529.30896-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
USB bulk and interrupt message timeouts are specified in milliseconds
and should specifically not vary with CONFIG_HZ.
Note that the bulk-out transfer timeout was set to the endpoint
bInterval value, which should be ignored for bulk endpoints and is
typically set to zero. This meant that a failing bulk-out transfer
would never time out.
Assume that the 10 second timeout used for all other transfers is more
than enough also for the bulk-out endpoint.
Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Fixes: 951348b37738 ("staging: comedi: vmk80xx: wait for URBs to complete")
Cc: stable@vger.kernel.org # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211025114532.4599-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver is using endpoint-sized buffers but must not assume that the
tx and rx buffers are of equal size or a malicious device could overflow
the slab-allocated receive buffer when doing bulk transfers.
Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Cc: stable@vger.kernel.org # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211025114532.4599-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver uses endpoint-sized USB transfer buffers but up until
recently had no sanity checks on the sizes.
Commit e1f13c879a7c ("staging: comedi: check validity of wMaxPacketSize
of usb endpoints found") inadvertently fixed NULL-pointer dereferences
when accessing the transfer buffers in case a malicious device has a
zero wMaxPacketSize.
Make sure to allocate buffers large enough to handle also the other
accesses that are done without a size check (e.g. byte 18 in
vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond
the buffers, for example, when doing descriptor fuzzing.
The original driver was for a low-speed device with 8-byte buffers.
Support was later added for a device that uses bulk transfers and is
presumably a full-speed device with a maximum 64-byte wMaxPacketSize.
Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Cc: stable@vger.kernel.org # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211025114532.4599-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
`compat_insnlist()` handles the 32-bit version of the `COMEDI_INSNLIST`
ioctl (whenwhen `CONFIG_COMPAT` is enabled). It allocates memory to
temporarily hold an array of `struct comedi_insn` converted from the
32-bit version in user space. This memory is only being freed if there
is a fault while filling the array, otherwise it is leaked.
Add a call to `kfree()` to fix the leak.
Fixes: b8d47d881305 ("comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSNLIST compat")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Cc: <stable@vger.kernel.org> # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210916145023.157479-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver updates from Greg KH:
"Here is the big set of IIO and staging driver patches for 5.14-rc1.
Loads of IIO driver updates and additions in here, the shortlog has
the full details.
For the staging side, we moved a few drivers out of staging, and
deleted the kpc2000 drivers as the original developer asked us to
because no one was working on them anymore.
Also in here are loads of coding style cleanups due to different
intern projects focusing on the staging tree to try to get experience
doing kernel development.
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (744 commits)
staging: hi6421-spmi-pmic: cleanup some macros
staging: hi6421-spmi-pmic: change identation of a table
staging: hi6421-spmi-pmic: change a return code
staging: hi6421-spmi-pmic: better name IRQs
staging: hi6421-spmi-pmic: use devm_request_threaded_irq()
staging: hisilicon,hi6421-spmi-pmic.yaml: cleanup descriptions
spmi: hisi-spmi-controller: move driver from staging
phy: phy-hi3670-usb3: move driver from staging into phy
staging: rtl8188eu: remove include/rtw_debug.h header
staging: rtl8188eu: remove GlobalDebugLevel variable
staging: rtl8188eu: remove DRIVER_PREFIX preprocessor definition
staging: rtl8188eu: remove RT_TRACE macro
staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_recv.c
staging: rtl8188eu: remove all RT_TRACE calls from hal/hal_intf.c
staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_xmit.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_xmit.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_pwrctrl.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_recv.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ioctl_set.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ieee80211.c
...
|
|
Fixes the following W=1 kernel build warning(s):
drivers/staging/comedi/drivers/comedi_isadma.c:157: warning: Function parameter or member 'dma_chan1' not described in 'comedi_isadma_alloc'
drivers/staging/comedi/drivers/comedi_isadma.c:157: warning: Excess function parameter 'dma_chan' description in 'comedi_isadma_alloc'
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520122538.3470259-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/staging/comedi/drivers/ni_routes.c:249: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/staging/comedi/drivers/ni_routes.c:398: warning: Function parameter or member 'routes' not described in 'ni_route_set_has_source'
drivers/staging/comedi/drivers/ni_routes.c:398: warning: Function parameter or member 'source' not described in 'ni_route_set_has_source'
drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'src_sel_reg_value' not described in 'ni_find_route_source'
drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'dest' not described in 'ni_find_route_source'
drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'tables' not described in 'ni_find_route_source'
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Cc: "Spencer E. Olson" <olsonse@umich.edu>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520122538.3470259-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/staging/comedi/drivers/ni_tio.c:1515: warning: Function parameter or member 'counter_dev' not described in 'ni_tio_get_routing'
drivers/staging/comedi/drivers/ni_tio.c:1515: warning: Function parameter or member 'dest' not described in 'ni_tio_get_routing'
drivers/staging/comedi/drivers/ni_tio.c:1515: warning: expecting prototype for Retrieves the register value of the current source of the output selector for(). Prototype was for ni_tio_get_routing() instead
drivers/staging/comedi/drivers/ni_tio.c:1544: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/staging/comedi/drivers/ni_tio.c:1584: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Cc: "J.P. Mellor" <jpmellor@rose-hulman.edu>
Cc: Herman.Bruyninckx@mech.kuleuven.ac.be
Cc: Wim.Meeussen@mech.kuleuven.ac.be
Cc: Klaas.Gadeyne@mech.kuleuven.ac.be
Cc: Comedi <comedi@comedi.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520122538.3470259-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/staging/comedi/drivers/comedi_8254.c:561: warning: Function parameter or member 'i8254' not described in 'comedi_8254_subdevice_init'
drivers/staging/comedi/drivers/comedi_8254.c:620: warning: Function parameter or member 'iobase' not described in 'comedi_8254_init'
drivers/staging/comedi/drivers/comedi_8254.c:620: warning: Excess function parameter 'mmio' description in 'comedi_8254_init'
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "David A. Schleef" <ds@schleef.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520122538.3470259-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'get_min_full_scales'
The variable ‘min_full_scale’ and function 'get_min_full_scales' are
not used, So delete them.
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Link: https://lore.kernel.org/r/20210514085214.53941-1-cuibixuan@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit fa60ce2cb450 ("treewide: remove editor modelines and cruft")
is different from what I submitted.
My original patch [1] did treewide cleanups including the comedi driver.
Unfortunately, commit 8ffdff6a8cfb ("staging: comedi: move out of staging
directory") moved drivers/staging/comedi/ to drivers/comedi/ before my
patch landed on Linus' tree from akpm tree.
If Andrew Morton had used Git, 'git merge' would have resolved such file
moves properly without any manual intervention.
Patches in akpm tree often get broken in his quilt workflows, and then
people end up with sending fixup patches.
[1] https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210510063450.412055-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The comedi code came into the kernel back in 2008, but traces its
lifetime to much much earlier. It's been polished and buffed and
there's really nothing preventing it from being part of the "real"
portion of the kernel.
So move it to drivers/comedi/ as it belongs there.
Many thanks to the hundreds of developers who did the work to make this
happen.
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Link: https://lore.kernel.org/r/YHauop4u3sP6lz8j@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
