summaryrefslogtreecommitdiff
path: root/drivers/bcma
AgeCommit message (Collapse)Author
2023-04-14bcma: Add explicit of_device.h includeRob Herring
bcma/main.c uses of_dma_configure() which is declared in of_device.h. of_device.h gets implicitly included by of_platform.h, but that is going to be removed soon. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230410232701.1561613-1-robh@kernel.org
2023-03-31bcma: remove unused mips_read32 functionTom Rix
clang with W=1 reports drivers/bcma/driver_mips.c:49:19: error: unused function 'mips_read32' [-Werror,-Wunused-function] static inline u32 mips_read32(struct bcma_drv_mips *mcore, ^ This function is not used so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230324190647.2654293-1-trix@redhat.com
2023-03-31bcma: Use of_address_to_resource()Rob Herring
Replace of_get_address() and of_translate_address() calls with single call to of_address_to_resource(). Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230319163159.225773-1-robh@kernel.org
2023-01-27driver core: make struct bus_type.uevent() take a const *Greg Kroah-Hartman
The uevent() callback in struct bus_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-04bcma: Fail probe if GPIO subdriver failsLinus Walleij
We currently register the BCMA core even if the GPIO portions fail. There is no reason for this: the GPIO should register just fine, if it fails the BCMA driver should fail. We already gracefully handle the case where the GPIO driver is not compiled in. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221028093000.239020-1-linus.walleij@linaro.org
2022-10-28Kalle Valo says:Jakub Kicinski
==================== pull-request: wireless-next-2022-10-28 First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7. All mac80211 driver are now converted to use internal TX queues, this might cause some regressions so we wanted to do this early in the cycle. Note: wireless tree was merged[1] to wireless-next to avoid some conflicts with mac80211 patches between the trees. Unfortunately there are still two smaller conflicts in net/mac80211/util.c which Stephen also reported[2]. In the first conflict initialise scratch_len to "params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and in the second conflict take the version which uses elems->scratch_pos. [1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91 [2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/ mac80211 - preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues - add API to show the link STAs in debugfs - all mac80211 drivers are now using mac80211 internal TX queues (iTXQs) rtw89 - support 8852BE rtl8xxxu - support RTL8188FU brmfmac - support two station interfaces concurrently bcma - support SPROM rev 11 ==================== Link: https://lore.kernel.org/r/20221028132943.304ECC433B5@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-19bcma: gpio: Convert to immutable gpio irqchipLinus Walleij
This switches the BCMA gpio irqchip to be immutable. The GPIO subsystem plays tricks on the irqchip structures, and we're fixing it one driver at a time. See merge commit 4bde53ab3370 ("Merge branch irq/gpio-immutable into irq/irqchip-next") for all the details. Tested on the D-Link DWL-6810AP. Cc: Marc Zyngier <maz@kernel.org> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221012192348.2234478-1-linus.walleij@linaro.org
2022-10-19bcma: support SPROM rev 11Linus Walleij
Rev 11 works fine for me to set the MAC address of gmac0 and gmac1 in the D-Link DWL-8610AP. Cc: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221011122941.2053705-1-linus.walleij@linaro.org
2022-10-12Merge tag 'irq-core-2022-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt updates from Thomas Gleixner: "Core code: - Provide a generic wrapper which can be utilized in drivers to handle the problem of force threaded demultiplex interrupts on RT enabled kernels. This avoids conditionals and horrible quirks in drivers all over the place - Fix up affected pinctrl and GPIO drivers to make them cleanly RT safe Interrupt drivers: - A new driver for the FSL MU platform specific MSI implementation - Make irqchip_init() available for pure ACPI based systems - Provide a functional DT binding for the Realtek RTL interrupt chip - The usual DT updates and small code improvements all over the place" * tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) irqchip: IMX_MU_MSI should depend on ARCH_MXC irqchip/imx-mu-msi: Fix wrong register offset for 8ulp irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap dt-bindings: irqchip: Describe the IMX MU block as a MSI controller irqchip: Add IMX MU MSI controller driver dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support irqchip/gic-v3: Fix typo in comment dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END platform-msi: Export symbol platform_msi_create_irq_domain() irqchip/realtek-rtl: use parent interrupts dt-bindings: interrupt-controller: realtek,rtl-intc: require parents irqchip/realtek-rtl: use irq_domain_add_linear() irqchip: Make irqchip_init() usable on pure ACPI systems bcma: gpio: Use generic_handle_irq_safe() gpio: mlxbf2: Use generic_handle_irq_safe() platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe() ssb: gpio: Use generic_handle_irq_safe() pinctrl: amd: Use generic_handle_irq_safe() ...
2022-09-19bcma: gpio: Use generic_handle_irq_safe()Sebastian Andrzej Siewior
On PREEMPT_RT enabled kernels the demultiplex interrupt handler is force threaded and runs with interrupts enabled. The invocation of generic_handle_irq() with interrupts enabled triggers a lockdep warning due to a non-irq safe lock acquisition. Instead of disabling interrupts on the driver level, use generic_handle_domain_irq_safe(). [ tglx: Split out from combo patch ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/YnkfWFzvusFFktSt@linutronix.de
2022-09-07bcma: Fix typo in commentsShaomin Deng
Remove the repeated word "registers" in comments. Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220811152043.11446-1-dengshaomin@cdjrlc.com
2022-05-09bcma: gpio: Switch to use fwnode instead of of_nodeAndy Shevchenko
GPIO library now accepts fwnode as a firmware node, so switch the driver to use it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504092525.71668-1-andriy.shevchenko@linux.intel.com
2022-03-25Merge tag 'mtd/changes-for-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "There has been a lot of activity in the MTD subsystem recently, with a number of SPI-NOR cleanups as well as the introduction of ECC engines that can be used by SPI controllers (hence a few SPI patches in here). Core MTD changes: - Replace the expert mode symbols with a single helper - Fix misuses of of_match_ptr() - Remove partid and partname debugfs files - tests: Fix eraseblock read speed miscalculation for lower partition sizes - TRX parser: Allow to use on MediaTek MIPS SoCs MTD driver changes: - spear_smi: use GFP_KERNEL - mchp48l640: Add SPI ID table - mchp23k256: Add SPI ID table - blkdevs: Avoid soft lockups with some mtd/spi devices - aspeed-smc: Improve probe resilience Hyperbus changes: - HBMC_AM654 should depend on ARCH_K3 NAND core changes: - ECC: - Add infrastructure to support hardware engines - Add a new helper to retrieve the ECC context - Provide a helper to retrieve a pilelined engine device NAND-ECC changes: - Macronix ECC engine: - Add Macronix external ECC engine support - Support SPI pipelined mode - Make two read-only arrays static const - Fix compile test issue Raw NAND core changes: - Fix misuses of of_match_node() - Rework of_get_nand_bus_width() - Remove of_get_nand_on_flash_bbt() wrapper - Protect access to rawnand devices while in suspend - bindings: Document the wp-gpios property Rax NAND controller driver changes: - atmel: Fix refcount issue in atmel_nand_controller_init - nandsim: - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern - Merge repeat codes in ns_switch_state - Replace overflow check with kzalloc to single kcalloc - rockchip: Fix platform_get_irq.cocci warning - stm32_fmc2: Add NAND Write Protect support - pl353: Set the nand chip node as the flash node - brcmnand: Fix sparse warnings in bcma_nand - omap_elm: Remove redundant variable 'errors' - gpmi: - Support fast edo timings for mx28 - Validate controller clock rate - Fix controller timings setting - brcmnand: - Add BCMA shim - BCMA controller uses command shift of 0 - Allow platform data instantation - Add platform data structure for BCMA - Allow working without interrupts - Move OF operations out of brcmnand_init_cs() - Avoid pdev in brcmnand_init_cs() - Allow SoC to provide I/O operations - Assign soc as early as possible Onenand changes: - Check for error irq SPI-NAND core changes: - Delay a little bit the dirmap creation - Create direct mapping descriptors for ECC operations SPI-NAND driver changes: - macronix: Use random program load SPI NOR core changes: - Move vendor specific code out of the core into vendor drivers. - Unify all function and object names in the vendor modules. - Make setup() callback optional to improve readability. - Skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash declaration. SPI changes: - Macronix SPI controller: - Fix the transmit path - Create a helper to configure the controller before an operation - Create a helper to ease the start of an operation - Add support for direct mapping - Add support for pipelined ECC operations - spi-mem: - Introduce a capability structure - Check the controller extra capabilities - cadence-quadspi/mxic: Provide capability structures - Kill the spi_mem_dtr_supports_op() helper - Add an ecc parameter to the spi_mem_op structure Binding changes: - Dropped mtd/cortina,gemini-flash.txt - Convert BCM47xx partitions to json-schema - Vendor prefixes: Clarify Macronix prefix - SPI NAND: Convert spi-nand description file to yaml - Raw NAND chip: Create a NAND chip description - Raw NAND controller: - Harmonize the property types - Fix a comment in the examples - Fix the reg property description - Describe Macronix NAND ECC engine - Macronix SPI controller: - Document the nand-ecc-engine property - Convert to yaml - The interrupt property is not mandatory" * tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (104 commits) mtd: nand: ecc: mxic: Fix compile test issue mtd: nand: mxic-ecc: make two read-only arrays static const mtd: hyperbus: HBMC_AM654 should depend on ARCH_K3 mtd: core: Remove partid and partname debugfs files dt-bindings: mtd: partitions: convert BCM47xx to the json-schema mtd: tests: Fix eraseblock read speed miscalculation for lower partition sizes mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init mtd: rawnand: rockchip: fix platform_get_irq.cocci warning mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set mtd: spi-nor: renumber flags mtd: spi-nor: slightly change code style in spi_nor_sr_ready() mtd: spi-nor: spansion: rename vendor specific functions and defines mtd: spi-nor: spansion: convert USE_CLSR to a manufacturer flag mtd: spi-nor: move all spansion specifics into spansion.c mtd: spi-nor: spansion: slightly rework control flow in late_init() mtd: spi-nor: micron-st: rename vendor specific functions and defines mtd: spi-nor: micron-st: convert USE_FSR to a manufacturer flag mtd: spi-nor: move all micron-st specifics into micron-st.c mtd: spi-nor: xilinx: correct the debug message mtd: spi-nor: xilinx: rename vendor specific functions and defines ...
2022-03-10bcma: gpio: remove redundant re-assignment of chip->ownerColin Ian King
There are two identical assignments of chip->owner to the same value, the second assignment is redundant and can be removed. Cleans up cppcheck warning: drivers/bcma/driver_gpio.c:184:15: style: Variable 'chip->owner' is reassigned a value before the old one has been used. [redundantAssignment] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220303085841.1124766-1-colin.i.king@gmail.com
2022-02-21bcma: cleanup commentsTom Rix
Remove the second 'info'. Replacements 'adventages' with 'advantages' 'strenth' with 'strength' 'atleast' with 'at least' 'thr'u'' with 'through' 'capabilty' with 'capability' 'controll' with 'control' 'ourself' with 'ourselves' 'noone' with 'no one' 'cores' to 'core's' and 'core' Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220213213121.2806376-1-trix@redhat.com
2022-01-23mtd: rawnand: brcmnand: Add platform data structure for BCMAFlorian Fainelli
Update the BCMA's chipcommon nand flash driver to detect which chip-select is used and pass that information via platform data to the brcmnand driver. Make sure that the brcmnand platform data structure is always at the beginning of the platform data of the "nflash" device created by BCMA to allow brcmnand to safely de-reference it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-7-f.fainelli@gmail.com
2021-11-06Merge tag 'pci-v5.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Conserve IRQs by setting up portdrv IRQs only when there are users (Jan Kiszka) - Rework and simplify _OSC negotiation for control of PCIe features (Joerg Roedel) - Remove struct pci_dev.driver pointer since it's redundant with the struct device.driver pointer (Uwe Kleine-König) Resource management: - Coalesce contiguous host bridge apertures from _CRS to accommodate BARs that cover more than one aperture (Kai-Heng Feng) Sysfs: - Check CAP_SYS_ADMIN before parsing user input (Krzysztof Wilczyński) - Return -EINVAL consistently from "store" functions (Krzysztof Wilczyński) - Use sysfs_emit() in endpoint "show" functions to avoid buffer overruns (Kunihiko Hayashi) PCIe native device hotplug: - Ignore Link Down/Up caused by resets during error recovery so endpoint drivers can remain bound to the device (Lukas Wunner) Virtualization: - Avoid bus resets on Atheros QCA6174, where they hang the device (Ingmar Klein) - Work around Pericom PI7C9X2G switch packet drop erratum by using store and forward mode instead of cut-through (Nathan Rossi) - Avoid trying to enable AtomicOps on VFs; the PF setting applies to all VFs (Selvin Xavier) MSI: - Document that /sys/bus/pci/devices/.../irq contains the legacy INTx interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry Song) VPD: - Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere in the possible VPD space; use these to simplify the cxgb3 driver (Heiner Kallweit) Peer-to-peer DMA: - Add (not subtract) the bus offset when calculating DMA address (Wang Lu) ASPM: - Re-enable LTR at Downstream Ports so they don't report Unsupported Requests when reset or hot-added devices send LTR messages (Mingchuang Qiao) Apple PCIe controller driver: - Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc Zyngier) Cadence PCIe controller driver: - Return success when probe succeeds instead of falling into error path (Li Chen) HiSilicon Kirin PCIe controller driver: - Reorganize PHY logic and add support for external PHY drivers (Mauro Carvalho Chehab) - Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro Carvalho Chehab) - Add Kirin 970 support (Mauro Carvalho Chehab) - Make driver removable (Mauro Carvalho Chehab) Intel VMD host bridge driver: - If IOMMU supports interrupt remapping, leave VMD MSI-X remapping enabled (Adrian Huang) - Number each controller so we can tell them apart in /proc/interrupts (Chunguang Xu) - Avoid building on UML because VMD depends on x86 bare metal APIs (Johannes Berg) Marvell Aardvark PCIe controller driver: - Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár) - Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár) - Downgrade PIO Response Status messages to debug level (Marek Behún) - Preserve CRS SV (Config Request Retry Software Visibility) bit in emulated Root Control register (Pali Rohár) - Fix issue in configuring reference clock (Pali Rohár) - Don't clear status bits for masked interrupts (Pali Rohár) - Don't mask unused interrupts (Pali Rohár) - Avoid code repetition in advk_pcie_rd_conf() (Marek Behún) - Retry config accesses on CRS response (Pali Rohár) - Simplify emulated Root Capabilities initialization (Pali Rohár) - Fix several link training issues (Pali Rohár) - Fix link-up checking via LTSSM (Pali Rohár) - Fix reporting of Data Link Layer Link Active (Pali Rohár) - Fix emulation of W1C bits (Marek Behún) - Fix MSI domain .alloc() method to return zero on success (Marek Behún) - Read entire 16-bit MSI vector in MSI handler, not just low 8 bits (Marek Behún) - Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits at startup; PCI core will set those as necessary (Pali Rohár) - When operating as a Root Port, set class code to "PCI Bridge" instead of the default "Mass Storage Controller" (Pali Rohár) - Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't implement this per spec (Pali Rohár) - Add emulation of option ROM BAR since aardvark doesn't implement this per spec (Pali Rohár) MediaTek MT7621 PCIe controller driver: - Add MediaTek MT7621 PCIe host controller driver and DT binding (Sergio Paracuellos) Qualcomm PCIe controller driver: - Add SC8180x compatible string (Bjorn Andersson) - Add endpoint controller driver and DT binding (Manivannan Sadhasivam) - Restructure to use of_device_get_match_data() (Prasad Malisetty) - Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty) Renesas R-Car PCIe controller driver: - Remove unnecessary includes (Geert Uytterhoeven) Rockchip DesignWare PCIe controller driver: - Add DT binding (Simon Xue) Socionext UniPhier Pro5 controller driver: - Serialize INTx masking/unmasking (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Run dwc .host_init() method before registering MSI interrupt handler so we can deal with pending interrupts left by bootloader (Bjorn Andersson) - Clean up Kconfig dependencies (Andy Shevchenko) - Export symbols to allow more modular drivers (Luca Ceresoli) TI DRA7xx PCIe controller driver: - Allow host and endpoint drivers to be modules (Luca Ceresoli) - Enable external clock if present (Luca Ceresoli) TI J721E PCIe driver: - Disable PHY when probe fails after initializing it (Christophe JAILLET) MicroSemi Switchtec management driver: - Return error to application when command execution fails because an out-of-band reset has cleared the device BARs, Memory Space Enable, etc (Kelvin Cao) - Fix MRPC error status handling issue (Kelvin Cao) - Mask out other bits when reading of management VEP instance ID (Kelvin Cao) - Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions (Kelvin Cao) - Add check of event support (Logan Gunthorpe) Miscellaneous: - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Use 'unsigned int' instead of bare 'unsigned' (Krzysztof Wilczyński) - Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof Wilczyński) - Fix some sscanf(), sprintf() format mismatches (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Correct some misspellings (Krzysztof Wilczyński)" * tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits) PCI: Add ACS quirk for Pericom PI7C9X2G switches PCI: apple: Configure RID to SID mapper on device addition iommu/dart: Exclude MSI doorbell from PCIe device IOVA range PCI: apple: Implement MSI support PCI: apple: Add INTx and per-port interrupt support PCI: kirin: Allow removing the driver PCI: kirin: De-init the dwc driver PCI: kirin: Disable clkreq during poweroff sequence PCI: kirin: Move the power-off code to a common routine PCI: kirin: Add power_off support for Kirin 960 PHY PCI: kirin: Allow building it as a module PCI: kirin: Add MODULE_* macros PCI: kirin: Add Kirin 970 compatible PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge PCI: apple: Set up reference clocks when probing PCI: apple: Add initial hardware bring-up PCI: of: Allow matching of an interrupt-map local to a PCI device of/irq: Allow matching of an interrupt-map local to an interrupt controller irqdomain: Make of_phandle_args_to_fwspec() generally available PCI: Do not enable AtomicOps on VFs ...
2021-10-12bcma: simplify reference to driver nameUwe Kleine-König
When bcma_host_pci_probe() is called, the PCI driver core has already assigned the device's driver in local_pci_probe(). So dev->driver is always true, and here it points to bcma_pci_bridge_driver, which has .name set to "bcma-pci-bridge". Simplify accordingly. Link: https://lore.kernel.org/r/20211004125935.2300113-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-05bcma: drop unneeded initialization valueSohaib Mohamed
Do not initialise statics to 0 ERROR found by checkpatch.pl Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210930194920.15847-1-sohaib.amhmd@gmail.com
2021-09-01Merge tag 'driver-core-5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core patches for 5.15-rc1. These do change a number of different things across different subsystems, and because of that, there were 2 stable tags created that might have already come into your tree from different pulls that did the following - changed the bus remove callback to return void - sysfs iomem_get_mapping rework Other than those two things, there's only a few small things in here: - kernfs performance improvements for huge numbers of sysfs users at once - tiny api cleanups - other minor changes All of these have been in linux-next for a while with no reported problems, other than the before-mentioned merge issue" * tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits) MAINTAINERS: Add dri-devel for component.[hc] driver core: platform: Remove platform_device_add_properties() ARM: tegra: paz00: Handle device properties with software node API bitmap: extend comment to bitmap_print_bitmask/list_to_buf drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI topology: use bin_attribute to break the size limitation of cpumap ABI lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list sysfs: Rename struct bin_attribute member to f_mapping sysfs: Invoke iomem_get_mapping() from the sysfs open callback debugfs: Return error during {full/open}_proxy_open() on rmmod zorro: Drop useless (and hardly used) .driver member in struct zorro_dev zorro: Simplify remove callback sh: superhyway: Simplify check in remove callback nubus: Simplify check in remove callback nubus: Make struct nubus_driver::remove return void kernfs: dont call d_splice_alias() under kernfs node lock kernfs: use i_lock to protect concurrent inode updates kernfs: switch kernfs to use an rwsem kernfs: use VFS negative dentry caching ...
2021-08-29bcma: Drop the unused parameter of bcma_scan_read32()Zenghui Yu
As it had never been used since the initial commit 8369ae33b705 ("bcma: add Broadcom specific AMBA bus driver"). Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210727025232.663-3-yuzenghui@huawei.com
2021-08-29bcma: Fix memory leak for internally-handled coresZenghui Yu
kmemleak reported that dev_name() of internally-handled cores were leaked on driver unbinding. Let's use device_initialize() to take refcounts for them and put_device() to properly free the related stuff. While looking at it, there's another potential issue for those which should be *registered* into driver core. If device_register() failed, we put device once and freed bcma_device structures. In bcma_unregister_cores(), they're treated as unregistered and we hit both UAF and double-free. That smells not good and has also been fixed now. Fixes: ab54bc8460b5 ("bcma: fill core details for every device") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210727025232.663-2-yuzenghui@huawei.com
2021-07-21bus: Make remove callback return voidUwe Kleine-König
The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-18bcma: remove unused functionJiapeng Chong
Fix the following clang warning: drivers/bcma/driver_mips.c:55:20: warning: unused function 'mips_write32' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1618382354-866-1-git-send-email-jiapeng.chong@linux.alibaba.com
2020-10-01bcma: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601233948-11629-6-git-send-email-Julia.Lawall@inria.fr
2020-08-02bcma: gpio: Use irqchip templateLinus Walleij
This makes the driver use the irqchip template to assign properties to the gpio_irq_chip instead of using the explicit call to gpiochip_irqchip_add(). The irqchip is instead added while adding the gpiochip. Cc: Rafał Miłecki <rafal@milecki.pl> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200722111725.210923-1-linus.walleij@linaro.org
2020-08-02drivers: bcma: remove set but not used variable `addrh` and `sizeh`Zheng Yongjun
Fixes gcc '-Wunused-but-set-variable' warning: drivers/bcma/scan.c: In function 'bcma_erom_get_addr_desc': drivers/bcma/scan.c:219 warning: variable `addrh` and `sizeh` set but not used [-Wunused-but-set-variable] Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200721083935.13306-1-zhengyongjun3@huawei.com
2020-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-18bcma: remove set but not used variable 'sizel'yu kuai
Fixes gcc '-Wunused-but-set-variable' warning: drivers/bcma/scan.c: In function ‘bcma_erom_get_addr_desc’: drivers/bcma/scan.c:222:20: warning: variable ‘sizel’ set but not used [-Wunused-but-set-variable] It is never used, and so can be removed. Fixes: 8369ae33b705 ("bcma: add Broadcom specific AMBA bus driver") Signed-off-by: yu kuai <yukuai3@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24bcma: fix block comment styleYadav Lamichhane
Fix a coding style issue. Signed-off-by: Yadav Lamichhane <tuxomega1@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13bcma: make arrays pwr_info_offset and sprom_sizes static const, shrinks ↵Colin Ian King
object size Arrays pwr_info_offset and sprom_sizes can be make static const rather than populating them on the stack. Shrinks object size by 236 bytes. Before: text data bss dec hex filename 11300 1320 64 12684 318c drivers/bcma/sprom.o After: text data bss dec hex filename 10904 1480 64 12448 30a0 drivers/bcma/sprom.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03bcma: fix incorrect update of BCMA_CORE_PCI_MDIO_DATAColin Ian King
An earlier commit re-worked the setting of the bitmask and is now assigning v with some bit flags rather than bitwise or-ing them into v, consequently the earlier bit-settings of v are being lost. Fix this by replacing an assignment with the bitwise or instead. Addresses-Coverity: ("Unused value") Fixes: 2be25cac8402 ("bcma: add constants for PCI and use them") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03bcma: remove two unused variablesYueHaibing
drivers/bcma/driver_mips.c:70:18: warning: ipsflag_irq_shift defined but not used [-Wunused-const-variable=] drivers/bcma/driver_mips.c:62:18: warning: ipsflag_irq_mask defined but not used [-Wunused-const-variable=] They are never used, so can be removed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-06bcma: Use dev_get_drvdataChuhong Yuan
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-01-10bcma: use dev_* printing functionsRafał Miłecki
It provides more meaningful messages. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-01-10bcma: keep a direct pointer to the struct deviceRafał Miłecki
Accessing struct device is pretty useful/common so having a direct pointer: 1) Simplifies some code 2) Makes bcma_bus_get_host_dev() unneeded 3) Allows further improvements like using dev_* printing helpers Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-18bcma: Allow selection of this driver when COMPILE_TEST=yBoris Brezillon
This allows us to increase compile-test coverage without having to build a kernel for MIPS. That's particularly interesting for subsystem maintainers that want to test as many drivers as possible in a single build. We also add a dependency on HAS_IOMEM in BCMA_HOST_SOC to make sure the driver is not selected when the arch does not implement IO accessors. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-06-04Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - replace the force_dma flag with a dma_configure bus method. (Nipun Gupta, although one patch is іncorrectly attributed to me due to a git rebase bug) - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai) - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the right thing for bounce buffering. - move dma-debug initialization to common code, and apply a few cleanups to the dma-debug code. - cleanup the Kconfig mess around swiotlb selection - swiotlb comment fixup (Yisheng Xie) - a trivial swiotlb fix. (Dan Carpenter) - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt) - add a new generic dma-noncoherent dma_map_ops implementation and use it for arc, c6x and nds32. - improve scatterlist validity checking in dma-debug. (Robin Murphy) - add a struct device quirk to limit the dma-mask to 32-bit due to bridge/system issues, and switch x86 to use it instead of a local hack for VIA bridges. - handle devices without a dma_mask more gracefully in the dma-direct code. * tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits) dma-direct: don't crash on device without dma_mask nds32: use generic dma_noncoherent_ops nds32: implement the unmap_sg DMA operation nds32: consolidate DMA cache maintainance routines x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag x86/pci-dma: remove the explicit nodac and allowdac option x86/pci-dma: remove the experimental forcesac boot option Documentation/x86: remove a stray reference to pci-nommu.c core, dma-direct: add a flag 32-bit dma limits dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs dma-debug: check scatterlist segments c6x: use generic dma_noncoherent_ops arc: use generic dma_noncoherent_ops arc: fix arc_dma_{map,unmap}_page arc: fix arc_dma_sync_sg_for_{cpu,device} arc: simplify arc_dma_sync_single_for_{cpu,device} dma-mapping: provide a generic dma-noncoherent implementation dma-mapping: simplify Kconfig dependencies riscv: add swiotlb support riscv: only enable ZONE_DMA32 for 64-bit ...
2018-05-12bcma: fix buffer size caused crash in bcma_core_mips_print_irq()Rafał Miłecki
Used buffer wasn't big enough to hold whole strings. Example output of this function is: [ 0.180892] bcma: bus0: core 0x0800, irq: 2(S)* 3 4 5 6 D I [ 0.180948] bcma: bus0: core 0x0812, irq: 2(S) 3* 4 5 6 D I [ 0.180998] bcma: bus0: core 0x082d, irq: 2(S) 3 4* 5 6 D I [ 0.181046] bcma: bus0: core 0x082c, irq: 2(S) 3 4 5 6 D I* which means we need to store up to 24 chars. Fixes: 758f7e06063a8 ("bcma: Use bcma_debug and not pr_cont in MIPS driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-03drivers: remove force dma flag from busesChristoph Hellwig
With each bus implementing its own DMA configuration callback, there is no need for bus to explicitly set the force_dma flag. Modify the of_dma_configure function to accept an input parameter which specifies if implicit DMA configuration is required when it is not described by the firmware. Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts Reviewed-by: Rob Herring <robh@kernel.org> [hch: tweaked the changelog a bit] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-03-13bcma: Prevent build of PCI host features in moduleMatt Redfearn
Attempting to build bcma.ko with BCMA_DRIVER_PCI_HOSTMODE=y results in a build error due to use of symbols not exported from vmlinux: ERROR: "pcibios_enable_device" [drivers/bcma/bcma.ko] undefined! ERROR: "register_pci_controller" [drivers/bcma/bcma.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 To prevent this, don't allow the host mode feature to be built if CONFIG_BCMA=m Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-28bcma: add HP Stream NotebookDenis 'GNUtoo' Carikli
In this laptop we have the following PCI device: 02:00.0 Network controller [0280]: Broadcom Limited BCM43142 802.11b/g/n [14e4:4365] (rev 01) Subsystem: Hewlett-Packard Company BCM43142 802.11b/g/n [103c:804a] [...] Region 0: Memory at 91000000 (64-bit, non-prefetchable) [size=32K] [...] With this patch, we can now see its WiFi chip: bcma: bus0: Found chip with id 43142, rev 0x01 and package 0x08 bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x28, class 0x0) bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x21, class 0x0) bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x16, class 0x0) bcma: bus0: Core 3 found: UNKNOWN (manuf 0x43B, id 0x368, rev 0x00, class 0x0) bcma: bus0: Found rev 15 PMU (capabilities 0x518C5E0F) bcma: bus0: SPROM offset 0x840 bcma: bus0: Found SPROM revision 10 bcma: bus0: Workarounds unknown or not needed for device 0xA886 bcma: bus0: Bus registered But it not yet supported by brcmsmac so it won't work for now: brcmsmac bcma0:1: brcms_b_attach wl0: vendor 0x14e4 device 0x4365 brcmsmac: unknown device id 4365 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27bcma: Replace mdelay with usleep_range in bcma_pmu_resources_initJia-Ju Bai
After checking all possible call chains to bcma_pmu_resources_init() here, my tool finds that this function is never called in atomic context, namely never in an interrupt handler or holding a spinlock. Thus mdelay can be replaced with usleep_range to avoid busy wait. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The BPF verifier conflict was some minor contextual issue. The TUN conflict was less trivial. Cong Wang fixed a memory leak of tfile->tx_array in 'net'. This is an skb_array. But meanwhile in net-next tun changed tfile->tx_arry into tfile->tx_ring which is a ptr_ring. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16bcma: Fix 'allmodconfig' and BCMA builds on MIPS targetsGuenter Roeck
Mips builds with BCMA host mode enabled fail in mainline and -next with: In file included from include/linux/bcma/bcma.h:10:0, from drivers/bcma/bcma_private.h:9, from drivers/bcma/main.c:8: include/linux/bcma/bcma_driver_pci.h:218:24: error: field 'pci_controller' has incomplete type Bisect points to commit d41e6858ba58c ("MIPS: Kconfig: Set default MIPS system type as generic") as the culprit. Analysis shows that the commmit changes PCI configuration and enables PCI_DRIVERS_GENERIC. This in turn disables PCI_DRIVERS_LEGACY. 'struct pci_controller' is, however, only defined if PCI_DRIVERS_LEGACY is enabled. Ultimately that means that BCMA_DRIVER_PCI_HOSTMODE depends on PCI_DRIVERS_LEGACY. Add the missing dependency. Fixes: d41e6858ba58c ("MIPS: Kconfig: Set default MIPS system type as ...") Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: James Hogan <jhogan@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: James Hogan <jhogan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07bcma: Adjust block commentAshish Kalra
use * for block comments in multiple lines according to kernel coding style Reported by: checkpatch.pl Signed-off-by: Ashish Kalra <eashishkalra@gmail.com> Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-14Merge tag 'gpio-v4.15-1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.15 kernel cycle: Core: - Fix the semantics of raw GPIO to actually be raw. No inversion semantics as before, but also no open draining, and allow the raw operations to affect lines used for interrupts as the caller supposedly knows what they are doing if they are getting the big hammer. - Rewrote the __inner_function() notation calls to names that make more sense. I just find this kind of code disturbing. - Drop the .irq_base() field from the gpiochip since now all IRQs are mapped dynamically. This is nice. - Support for .get_multiple() in the core driver API. This allows us to read several GPIO lines with a single register read. This has high value for some usecases: it can be used to create oscilloscopes and signal analyzers and other things that rely on reading several lines at exactly the same instant. Also a generally nice optimization. This uses the new assign_bit() macro from the bitops lib that was ACKed by Andrew Morton and is implemented for two drivers, one of them being the generic MMIO driver so everyone using that will be able to benefit from this. - Do not allow requests of Open Drain and Open Source setting of a GPIO line simultaneously. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. - A new interrupt chip core helper. This will be helpful to deal with "banked" GPIOs, which means GPIO controllers with several logical blocks of GPIO inside them. This is several gpiochips per device in the device model, in contrast to the case when there is a 1-to-1 relationship between a device and a gpiochip. New drivers: - Maxim MAX3191x industrial serializer, a very interesting piece of professional I/O hardware. - Uniphier GPIO driver. This is the GPIO block from the recent Socionext (ex Fujitsu and Panasonic) platform. - Tegra 186 driver. This is based on the new banked GPIO infrastructure. Other improvements: - Some documentation improvements. - Wakeup support for the DesignWare DWAPB GPIO controller. - Reset line support on the DesignWare DWAPB GPIO controller. - Several non-critical bug fixes and improvements for the Broadcom BRCMSTB driver. - Misc non-critical bug fixes like exotic errorpaths, removal of dead code etc. - Explicit comments on fall-through switch() statements" * tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits) gpio: tegra186: Remove tegra186_gpio_lock_class gpio: rcar: Add r8a77995 (R-Car D3) support pinctrl: bcm2835: Fix some merge fallout gpio: Fix undefined lock_dep_class gpio: Automatically add lockdep keys gpio: Introduce struct gpio_irq_chip.first gpio: Disambiguate struct gpio_irq_chip.nested gpio: Add Tegra186 support gpio: Export gpiochip_irq_{map,unmap}() gpio: Implement tighter IRQ chip integration gpio: Move lock_key into struct gpio_irq_chip gpio: Move irq_valid_mask into struct gpio_irq_chip gpio: Move irq_nested into struct gpio_irq_chip gpio: Move irq_chained_parent to struct gpio_irq_chip gpio: Move irq_default_type to struct gpio_irq_chip gpio: Move irq_handler to struct gpio_irq_chip gpio: Move irqdomain into struct gpio_irq_chip gpio: Move irqchip into struct gpio_irq_chip gpio: Introduce struct gpio_irq_chip pinctrl: armada-37xx: remove unused variable ...
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-19 09:46:38 +0000