summaryrefslogtreecommitdiff
path: root/crypto/testmgr.h
AgeCommit message (Collapse)Author
2024-03-22Revert "crypto: pkcs7 - remove sha1 support"Eric Biggers
This reverts commit 16ab7cb5825fc3425c16ad2c6e53d827f382d7c6 because it broke iwd. iwd uses the KEYCTL_PKEY_* UAPIs via its dependency libell, and apparently it is relying on SHA-1 signature support. These UAPIs are fairly obscure, and their documentation does not mention which algorithms they support. iwd really should be using a properly supported userspace crypto library instead. Regardless, since something broke we have to revert the change. It may be possible that some parts of this commit can be reinstated without breaking iwd (e.g. probably the removal of MODULE_SIG_SHA1), but for now this just does a full revert to get things working again. Reported-by: Karel Balej <balejk@matfyz.cz> Closes: https://lore.kernel.org/r/CZSHRUIJ4RKL.34T4EASV5DNJM@matfyz.cz Cc: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Tested-by: Karel Balej <balejk@matfyz.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-12-08crypto: testmgr - Remove cfb and ofbHerbert Xu
Remove test vectors for CFB/OFB. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-20crypto: pkcs7 - remove sha1 supportDimitri John Ledkov
Removes support for sha1 signed kernel modules, importing sha1 signed x.509 certificates. rsa-pkcs1pad keeps sha1 padding support, which seems to be used by virtio driver. sha1 remains available as there are many drivers and subsystems using it. Note only hmac(sha1) with secret keys remains cryptographically secure. In the kernel there are filesystems, IMA, tpm/pcr that appear to be using sha1. Maybe they can all start to be slowly upgraded to something else i.e. blake3, ParallelHash, SHAKE256 as needed. Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-12crypto: testmgr - Remove zlib-deflateHerbert Xu
Remove zlib-deflate test vectors as it no longer exists in the kernel. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2023-04-20crypto: testmgr - Add some test vectors for cmac(camellia)David Howells
Add some test vectors for 128-bit cmac(camellia) as found in draft-kato-ipsec-camellia-cmac96and128-01 section 6.2. The document also shows vectors for camellia-cmac-96, and for VK with a length greater than 16, but I'm not sure how to express those in testmgr. This also leaves cts(cbc(camellia)) untested, but I can't seem to find any tests for that that I could put into testmgr. Signed-off-by: David Howells <dhowells@redhat.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: Chuck Lever <chuck.lever@oracle.com> cc: Scott Mayhew <smayhew@redhat.com> cc: linux-nfs@vger.kernel.org cc: linux-crypto@vger.kernel.org Link: https://datatracker.ietf.org/doc/pdf/draft-kato-ipsec-camellia-cmac96and128-01 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-04crypto: testmgr - add SM4 cts-cbc/xts/xcbc test vectorsTianjia Zhang
This patch newly adds the test vectors of CTS-CBC/XTS/XCBC modes of the SM4 algorithm, and also added some test vectors for SM4 GCM/CCM. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-22crypto: testmgr - some more fixes to RSA test vectorsIgnat Korchagin
Two more fixes: * some test vectors in commit 79e6e2f3f3ff ("crypto: testmgr - populate RSA CRT parameters in RSA test vectors") had misplaced commas, which break the test and trigger KASAN warnings at least on x86-64 * pkcs1pad test vector did not have its CRT parameters Fixes: 79e6e2f3f3ff ("crypto: testmgr - populate RSA CRT parameters in RSA test vectors") Reported-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15crypto: testmgr - add ARIA testmgr testsTaehee Yoo
It contains ARIA ecb(aria), cbc(aria), cfb(aria), ctr(aria), and gcm(aria). ecb testvector is from RFC standard. cbc, cfb, and ctr testvectors are from KISA[1], who developed ARIA algorithm. gcm(aria) is from openssl test vector. [1] https://seed.kisa.or.kr/kisa/kcmvp/EgovVerification.do (Korean) Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-08crypto: testmgr - populate RSA CRT parameters in RSA test vectorsIgnat Korchagin
Changes from v1: * replace some accidental spaces with tabs In commit f145d411a67e ("crypto: rsa - implement Chinese Remainder Theorem for faster private key operations") we have started to use the additional primes and coefficients for RSA private key operations. However, these additional parameters are not present (defined as 0 integers) in the RSA test vectors. Some parameters were borrowed from OpenSSL, so I was able to find the source. I could not find the public source for 1 vector though, so had to recover the parameters by implementing Appendix C from [1]. [1]: https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-56Br1.pdf Fixes: f145d411a67e ("crypto: rsa - implement Chinese Remainder Theorem for faster private key operations") Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-30crypto: testmgr - fix version number of RSA testslei he
According to PKCS#1 standard, the 'otherPrimeInfos' field contains the information for the additional primes r_3, ..., r_u, in order. It shall be omitted if the version is 0 and shall contain at least one instance of OtherPrimeInfo if the version is 1, see: https://www.rfc-editor.org/rfc/rfc3447#page-44 Replace the version number '1' with 0, otherwise, some drivers may not pass the run-time tests. Signed-off-by: lei he <helei.sig11@bytedance.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-10crypto: blake2s - remove shash moduleJason A. Donenfeld
BLAKE2s has no currently known use as an shash. Just remove all of this unnecessary plumbing. Removing this shash was something we talked about back when we were making BLAKE2s a built-in, but I simply never got around to doing it. So this completes that project. Importantly, this fixs a bug in which the lib code depends on crypto_simd_disabled_for_test, causing linker errors. Also add more alignment tests to the selftests and compare SIMD and non-SIMD compression functions, to make up for what we lose from testmgr.c. Reported-by: gaochao <gaochao49@huawei.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: stable@vger.kernel.org Fixes: 6048fdcc5f26 ("lib/crypto: blake2s: include as built-in") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-10crypto: hctr2 - Add HCTR2 supportNathan Huckleberry
Add support for HCTR2 as a template. HCTR2 is a length-preserving encryption mode that is efficient on processors with instructions to accelerate AES and carryless multiplication, e.g. x86 processors with AES-NI and CLMUL, and ARM processors with the ARMv8 Crypto Extensions. As a length-preserving encryption mode, HCTR2 is suitable for applications such as storage encryption where ciphertext expansion is not possible, and thus authenticated encryption cannot be used. Currently, such applications usually use XTS, or in some cases Adiantum. XTS has the disadvantage that it is a narrow-block mode: a bitflip will only change 16 bytes in the resulting ciphertext or plaintext. This reveals more information to an attacker than necessary. HCTR2 is a wide-block mode, so it provides a stronger security property: a bitflip will change the entire message. HCTR2 is somewhat similar to Adiantum, which is also a wide-block mode. However, HCTR2 is designed to take advantage of existing crypto instructions, while Adiantum targets devices without such hardware support. Adiantum is also designed with longer messages in mind, while HCTR2 is designed to be efficient even on short messages. HCTR2 requires POLYVAL and XCTR as components. More information on HCTR2 can be found here: "Length-preserving encryption with HCTR2": https://eprint.iacr.org/2021/1441.pdf Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-10crypto: polyval - Add POLYVAL supportNathan Huckleberry
Add support for POLYVAL, an ε-Δ-universal hash function similar to GHASH. This patch only uses POLYVAL as a component to implement HCTR2 mode. It should be noted that POLYVAL was originally specified for use in AES-GCM-SIV (RFC 8452), but the kernel does not currently support this mode. POLYVAL is implemented as an shash algorithm. The implementation is modified from ghash-generic.c. For more information on POLYVAL see: Length-preserving encryption with HCTR2: https://eprint.iacr.org/2021/1441.pdf AES-GCM-SIV: Nonce Misuse-Resistant Authenticated Encryption: https://datatracker.ietf.org/doc/html/rfc8452 Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-10crypto: xctr - Add XCTR supportNathan Huckleberry
Add a generic implementation of XCTR mode as a template. XCTR is a blockcipher mode similar to CTR mode. XCTR uses XORs and little-endian addition rather than big-endian arithmetic which has two advantages: It is slightly faster on little-endian CPUs and it is less likely to be implemented incorrect since integer overflows are not possible on practical input sizes. XCTR is used as a component to implement HCTR2. More information on XCTR mode can be found in the HCTR2 paper: https://eprint.iacr.org/2021/1441.pdf Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-26Merge tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer 64-bit data integrity support from Jens Axboe: "This adds support for 64-bit data integrity in the block layer and in NVMe" * tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block: crypto: fix crc64 testmgr digest byte order nvme: add support for enhanced metadata block: add pi for extended integrity crypto: add rocksoft 64b crc guard tag framework lib: add rocksoft model crc64 linux/kernel: introduce lower_48_bits function asm-generic: introduce be48 unaligned accessors nvme: allow integrity on extended metadata formats block: support pi with extended metadata
2022-03-22crypto: fix crc64 testmgr digest byte orderKeith Busch
The result is set in little endian, so the expected digest needs to be consistent for big endian machines. Fixes: f3813f4b287e ("crypto: add rocksoft 64b crc guard tag framework") Reported-by: Vasily Gorbik <gor@linux.ibm.com> Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20220322142107.4581-1-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-07crypto: add rocksoft 64b crc guard tag frameworkKeith Busch
Hardware specific features may be able to calculate a crc64, so provide a framework for drivers to register their implementation. If nothing is registered, fallback to the generic table lookup implementation. The implementation is modeled after the crct10dif equivalent. Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20220303201312.3255347-7-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-03crypto: testmgr - add keygen tests for ffdheXYZ(dh) templatesNicolai Stange
Now that the ffdheXYZ(dh) templates support ephemeral key generation, add ->keygen = 1 TVs for each of them to the testmgr.c. In order to facilitate string merging by the compiler, set party B's secret and public keys to the ones specified for party A in the respective existing known answer test. With GCC 7.5 on x86_64, this leads to an increase of testmgr.o size by less than half a kB. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: testmgr - add known answer tests for ffdheXYZ(dh) templatesNicolai Stange
Add known answer tests for the ffdhe2048(dh), ffdhe3072(dh), ffdhe4096(dh), ffdhe6144(dh) and ffdhe8192(dh) templates introduced with the previous patch to the testmgr. All TVs have been generated with OpenSSL. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: dh - remove struct dh's ->q memberNicolai Stange
The only current user of the DH KPP algorithm, the keyctl(KEYCTL_DH_COMPUTE) syscall, doesn't set the domain parameter ->q in struct dh. Remove it and any associated (de)serialization code in crypto_dh_encode_key() and crypto_dh_decode_key. Adjust the encoded ->secret values in testmgr's DH test vectors accordingly. Note that the dh-generic implementation would have initialized its struct dh_ctx's ->q from the decoded struct dh's ->q, if present. If this struct dh_ctx's ->q would ever have been non-NULL, it would have enabled a full key validation as specified in NIST SP800-56A in dh_is_pubkey_valid(). However, as outlined above, ->q is always NULL in practice and the full key validation code is effectively dead. A later patch will make dh_is_pubkey_valid() to calculate Q from P on the fly, if possible, so don't remove struct dh_ctx's ->q now, but leave it there until that has happened. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-11crypto: hmac - disallow keys < 112 bits in FIPS modeStephan Müller
FIPS 140 requires a minimum security strength of 112 bits. This implies that the HMAC key must not be smaller than 112 in FIPS mode. This restriction implies that the test vectors for HMAC that have a key that is smaller than 112 bits must be disabled when FIPS support is compiled. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-11crypto: hmac - add fips_skip supportStephan Müller
By adding the support for the flag fips_skip, hash / HMAC test vectors may be marked to be not applicable in FIPS mode. Such vectors are silently skipped in FIPS mode. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-11-20crypto: testmgr - Fix wrong test case of RSALei He
According to the BER encoding rules, integer value should be encoded as two's complement, and if the highest bit of a positive integer is 1, should add a leading zero-octet. The kernel's built-in RSA algorithm cannot recognize negative numbers when parsing keys, so it can pass this test case. Export the key to file and run the following command to verify the fix result: openssl asn1parse -inform DER -in /path/to/key/file Signed-off-by: Lei He <helei.sig11@bytedance.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-10-29crypto: testmgr - fix wrong key length for pkcs1padLei He
Fix wrong test data at testmgr.h, it seems to be caused by ignoring the last '\0' when calling sizeof. Signed-off-by: Lei He <helei.sig11@bytedance.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: testmgr - Add GCM/CCM mode test of SM4 algorithmTianjia Zhang
The GCM/CCM mode of the SM4 algorithm is defined in the rfc 8998 specification, and the test case data also comes from rfc 8998. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-28crypto: drbg - self test for HMAC(SHA-512)Stephan Müller
Considering that the HMAC(SHA-512) DRBG is the default DRBG now, a self test is to be provided. The test vector is obtained from a successful NIST ACVP test run. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28crypto: ecdh - add test suite for NIST P384Hui Tang
Add test vector params for NIST P384, add test vector for NIST P384 on vector of tests. Vector param from: https://datatracker.ietf.org/doc/html/rfc5903#section-3.1 Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28crypto: ecdh - fix ecdh-nist-p192's entry in testmgrHui Tang
Add a comment that p192 will fail to register in FIPS mode. Fix ecdh-nist-p192's entry in testmgr by removing the ifdefs and not setting fips_allowed. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-21crypto: testmgr - fix initialization of 'secret_size'Hui Tang
Actual data length of the 'secret' is not equal to the 'secret_size'. Since the 'curve_id' has removed in the 'secret', the 'secret_size' should subtract the length of the 'curve_id'. Fixes: 6763f5ea2d9a ("crypto: ecdh - move curve_id of ECDH from ...") Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26Merge branch 'ecc'Herbert Xu
This pulls in the NIST P384/256/192 x509 changes.
2021-03-26crypto: ecdsa - Register NIST P384 and extend test suiteSaulo Alessandre
Register NIST P384 as an akcipher and extend the testmgr with NIST P384-specific test vectors. Summary of changes: * crypto/ecdsa.c - add ecdsa_nist_p384_init_tfm - register and unregister P384 tfm * crypto/testmgr.c - add test vector for P384 on vector of tests * crypto/testmgr.h - add test vector params for P384(sha1, sha224, sha256, sha384 and sha512) Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26crypto: ecdsa - Add support for ECDSA signature verificationStefan Berger
Add support for parsing the parameters of a NIST P256 or NIST P192 key. Enable signature verification using these keys. The new module is enabled with CONFIG_ECDSA: Elliptic Curve Digital Signature Algorithm (NIST P192, P256 etc.) is A NIST cryptographic standard algorithm. Only signature verification is implemented. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-13crypto: ecdh - move curve_id of ECDH from the key to algorithm nameMeng Yu
1. crypto and crypto/atmel-ecc: Move curve id of ECDH from the key into the algorithm name instead in crypto and atmel-ecc, so ECDH algorithm name change form 'ecdh' to 'ecdh-nist-pxxx', and we cannot use 'curve_id' in 'struct ecdh'; 2. crypto/testmgr and net/bluetooth: Modify 'testmgr.c', 'testmgr.h' and 'net/bluetooth' to adapt the modification. Signed-off-by: Meng Yu <yumeng18@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: serpent - get rid of obsolete tnepres variantArd Biesheuvel
It is not trivial to trace back why exactly the tnepres variant of serpent was added ~17 years ago - Google searches come up mostly empty, but it seems to be related with the 'kerneli' version, which was based on an incorrect interpretation of the serpent spec. In other words, nobody is likely to care anymore today, so let's get rid of it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29crypto: salsa20 - remove Salsa20 stream cipher algorithmArd Biesheuvel
Salsa20 is not used anywhere in the kernel, is not suitable for disk encryption, and widely considered to have been superseded by ChaCha20. So let's remove it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29crypto: tgr192 - remove Tiger 128/160/192 hash algorithmsArd Biesheuvel
Tiger is never referenced anywhere in the kernel, and unlikely to be depended upon by userspace via AF_ALG. So let's remove it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29crypto: rmd320 - remove RIPE-MD 320 hash algorithmArd Biesheuvel
RIPE-MD 320 is never referenced anywhere in the kernel, and unlikely to be depended upon by userspace via AF_ALG. So let's remove it Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29crypto: rmd256 - remove RIPE-MD 256 hash algorithmArd Biesheuvel
RIPE-MD 256 is never referenced anywhere in the kernel, and unlikely to be depended upon by userspace via AF_ALG. So let's remove it Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29crypto: rmd128 - remove RIPE-MD 128 hash algorithmArd Biesheuvel
RIPE-MD 128 is never referenced anywhere in the kernel, and unlikely to be depended upon by userspace via AF_ALG. So let's remove it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: sm2 - add SM2 test vectors to testmgrTianjia Zhang
Add testmgr test vectors for SM2 algorithm. These vectors come from `openssl pkeyutl -sign` and libgcrypt. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-07-23crypto: testmgr - delete duplicated wordsRandy Dunlap
Delete the doubled word "from" in multiple places. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: testmgr - generate inauthentic AEAD test vectorsEric Biggers
The whole point of using an AEAD over length-preserving encryption is that the data is authenticated. However currently the fuzz tests don't test any inauthentic inputs to verify that the data is actually being authenticated. And only two algorithms ("rfc4543(gcm(aes))" and "ccm(aes)") even have any inauthentic test vectors at all. Therefore, update the AEAD fuzz tests to sometimes generate inauthentic test vectors, either by generating a (ciphertext, AAD) pair without using the key, or by mutating an authentic pair that was generated. To avoid flakiness, only assume this works reliably if the auth tag is at least 8 bytes. Also account for the rfc4106, rfc4309, and rfc7539esp algorithms intentionally ignoring the last 8 AAD bytes, and for some algorithms doing extra checks that result in EINVAL rather than EBADMSG. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: curve25519 - add kpp selftestArd Biesheuvel
In preparation of introducing KPP implementations of Curve25519, import the set of test cases proposed by the Zinc patch set, but converted to the KPP format. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: testmgr - add test cases for Blake2sArd Biesheuvel
As suggested by Eric for the Blake2b implementation contributed by David, introduce a set of test vectors for Blake2s covering different digest and key sizes. blake2s-128 blake2s-160 blake2s-224 blake2s-256 --------------------------------------------------- len=0 | klen=0 klen=1 klen=16 klen=32 len=1 | klen=16 klen=32 klen=0 klen=1 len=7 | klen=32 klen=0 klen=1 klen=16 len=15 | klen=1 klen=16 klen=32 klen=0 len=64 | klen=0 klen=1 klen=16 klen=32 len=247 | klen=16 klen=32 klen=0 klen=1 len=256 | klen=32 klen=0 klen=1 klen=16 Cc: David Sterba <dsterba@suse.com> Cc: Eric Biggers <ebiggers@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: testmgr - add test vectors for blake2bDavid Sterba
Test vectors for blake2b with various digest sizes. As the algorithm is the same up to the digest calculation, the key and input data length is distributed in a way that tests all combinanions of the two over the digest sizes. Based on the suggestion from Eric, the following input sizes are tested [0, 1, 7, 15, 64, 247, 256], where blake2b blocksize is 128, so the padded and the non-padded input buffers are tested. blake2b-160 blake2b-256 blake2b-384 blake2b-512 --------------------------------------------------- len=0 | klen=0 klen=1 klen=32 klen=64 len=1 | klen=32 klen=64 klen=0 klen=1 len=7 | klen=64 klen=0 klen=1 klen=32 len=15 | klen=1 klen=32 klen=64 klen=0 len=64 | klen=0 klen=1 klen=32 klen=64 len=247 | klen=32 klen=64 klen=0 klen=1 len=256 | klen=64 klen=0 klen=1 klen=32 Where key: - klen=0: empty key - klen=1: 1 byte value 0x42, 'B' - klen=32: first 32 bytes of the default key, sequence 00..1f - klen=64: default key, sequence 00..3f The unkeyed vectors are ordered before keyed, as this is required by testmgr. CC: Eric Biggers <ebiggers@kernel.org> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-05crypto: testmgr - Added testvectors for the rfc3686(ctr(sm4)) skcipherPascal van Leeuwen
Added testvectors for the rfc3686(ctr(sm4)) skcipher algorithm changes since v1: - nothing Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-05crypto: testmgr - Added testvectors for the ofb(sm4) & cfb(sm4) skciphersPascal van Leeuwen
Added testvectors for the ofb(sm4) and cfb(sm4) skcipher algorithms changes since v1: - nothing Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-05crypto: testmgr - Added testvectors for the hmac(sm3) ahashPascal van Leeuwen
Added testvectors for the hmac(sm3) ahash authentication algorithm changes since v1 & v2: -nothing Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-05crypto: testmgr - add another gcm(aes) testcaseArd Biesheuvel
Add an additional gcm(aes) test case that triggers the code path in the new arm64 driver that deals with tail blocks whose size is not a multiple of the block size, and where the size of the preceding input is a multiple of 64 bytes. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-30crypto: essiv - add tests for essiv in cbc(aes)+sha256 modeArd Biesheuvel
Add a test vector for the ESSIV mode that is the most widely used, i.e., using cbc(aes) and sha256, in both skcipher and AEAD modes (the latter is used by tcrypt to encapsulate the authenc template or h/w instantiations of the same) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>