| Age | Commit message (Collapse) | Author |
|---|
|
Pull more block driver updates from Jens Axboe:
- Last series adding error handling support for add_disk() in drivers.
After this one, and once the SCSI side has been merged, we can
finally annotate add_disk() as must_check. (Luis)
- bcache fixes (Coly)
- zram fixes (Ming)
- ataflop locking fix (Tetsuo)
- nbd fixes (Ye, Yu)
- MD merge via Song
- Cleanup (Yang)
- sysfs fix (Guoqing)
- Misc fixes (Geert, Wu, luo)
* tag 'for-5.16/drivers-2021-11-09' of git://git.kernel.dk/linux-block: (34 commits)
bcache: Revert "bcache: use bvec_virt"
ataflop: Add missing semicolon to return statement
floppy: address add_disk() error handling on probe
ataflop: address add_disk() error handling on probe
block: update __register_blkdev() probe documentation
ataflop: remove ataflop_probe_lock mutex
mtd/ubi/block: add error handling support for add_disk()
block/sunvdc: add error handling support for add_disk()
z2ram: add error handling support for add_disk()
nvdimm/pmem: use add_disk() error handling
nvdimm/pmem: cleanup the disk if pmem_release_disk() is yet assigned
nvdimm/blk: add error handling support for add_disk()
nvdimm/blk: avoid calling del_gendisk() on early failures
nvdimm/btt: add error handling support for add_disk()
nvdimm/btt: use goto error labels on btt_blk_init()
loop: Remove duplicate assignments
drbd: Fix double free problem in drbd_create_device
nvdimm/btt: do not call del_gendisk() if not needed
bcache: fix use-after-free problem in bcache_device_free()
zram: replace fsync_bdev with sync_blockdev
...
|
|
Pull block fixes from Jens Axboe:
- Set of fixes for the batched tag allocation (Ming, me)
- add_disk() error handling fix (Luis)
- Nested queue quiesce fixes (Ming)
- Shared tags init error handling fix (Ye)
- Misc cleanups (Jean, Ming, me)
* tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block:
nvme: wait until quiesce is done
scsi: make sure that request queue queiesce and unquiesce balanced
scsi: avoid to quiesce sdev->request_queue two times
blk-mq: add one API for waiting until quiesce is done
blk-mq: don't free tags if the tag_set is used by other device in queue initialztion
block: fix device_add_disk() kobject_create_and_add() error handling
block: ensure cached plug request matches the current queue
block: move queue enter logic into blk_mq_submit_bio()
block: make bio_queue_enter() fast-path available inline
block: split request allocation components into helpers
block: have plug stored requests hold references to the queue
blk-mq: update hctx->nr_active in blk_mq_end_request_batch()
blk-mq: add RQF_ELV debug entry
blk-mq: only try to run plug merge if request has same queue with incoming bio
block: move RQF_ELV setting into allocators
dm: don't stop request queue after the dm device is suspended
block: replace always false argument with 'false'
block: assign correct tag before doing prefetch of request
blk-mq: fix redundant check of !e expression
|
|
Pull more bdev size updates from Jens Axboe:
"Two followup changes for the bdev-size series from this merge window:
- Add loff_t cast to bdev_nr_bytes() (Christoph)
- Use bdev_nr_bytes() consistently for the block parts at least (me)"
* tag 'for-5.16/bdev-size-2021-11-09' of git://git.kernel.dk/linux-block:
block: use new bdev_nr_bytes() helper for blkdev_{read,write}_iter()
block: add a loff_t cast to bdev_nr_bytes
|
|
Some drivers(NVMe, SCSI) need to call quiesce and unquiesce in pair, but it
is hard to switch to this style, so these drivers need one atomic flag for
helping to balance quiesce and unquiesce.
When quiesce is in-progress, the driver still needs to wait until
the quiesce is done, so add API of blk_mq_wait_quiesce_done() for
these drivers.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211109071144.181581-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
initialztion
We got UAF report on v5.10 as follows:
[ 1446.674930] ==================================================================
[ 1446.675970] BUG: KASAN: use-after-free in blk_mq_get_driver_tag+0x9a4/0xa90
[ 1446.676902] Read of size 8 at addr ffff8880185afd10 by task kworker/1:2/12348
[ 1446.677851]
[ 1446.678073] CPU: 1 PID: 12348 Comm: kworker/1:2 Not tainted 5.10.0-10177-gc9c81b1e346a #2
[ 1446.679168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 1446.680692] Workqueue: kthrotld blk_throtl_dispatch_work_fn
[ 1446.681448] Call Trace:
[ 1446.681800] dump_stack+0x9b/0xce
[ 1446.682916] print_address_description.constprop.6+0x3e/0x60
[ 1446.685999] kasan_report.cold.9+0x22/0x3a
[ 1446.687186] blk_mq_get_driver_tag+0x9a4/0xa90
[ 1446.687785] blk_mq_dispatch_rq_list+0x21a/0x1d40
[ 1446.692576] __blk_mq_do_dispatch_sched+0x394/0x830
[ 1446.695758] __blk_mq_sched_dispatch_requests+0x398/0x4f0
[ 1446.698279] blk_mq_sched_dispatch_requests+0xdf/0x140
[ 1446.698967] __blk_mq_run_hw_queue+0xc0/0x270
[ 1446.699561] __blk_mq_delay_run_hw_queue+0x4cc/0x550
[ 1446.701407] blk_mq_run_hw_queue+0x13b/0x2b0
[ 1446.702593] blk_mq_sched_insert_requests+0x1de/0x390
[ 1446.703309] blk_mq_flush_plug_list+0x4b4/0x760
[ 1446.705408] blk_flush_plug_list+0x2c5/0x480
[ 1446.708471] blk_finish_plug+0x55/0xa0
[ 1446.708980] blk_throtl_dispatch_work_fn+0x23b/0x2e0
[ 1446.711236] process_one_work+0x6d4/0xfe0
[ 1446.711778] worker_thread+0x91/0xc80
[ 1446.713400] kthread+0x32d/0x3f0
[ 1446.714362] ret_from_fork+0x1f/0x30
[ 1446.714846]
[ 1446.715062] Allocated by task 1:
[ 1446.715509] kasan_save_stack+0x19/0x40
[ 1446.716026] __kasan_kmalloc.constprop.1+0xc1/0xd0
[ 1446.716673] blk_mq_init_tags+0x6d/0x330
[ 1446.717207] blk_mq_alloc_rq_map+0x50/0x1c0
[ 1446.717769] __blk_mq_alloc_map_and_request+0xe5/0x320
[ 1446.718459] blk_mq_alloc_tag_set+0x679/0xdc0
[ 1446.719050] scsi_add_host_with_dma.cold.3+0xa0/0x5db
[ 1446.719736] virtscsi_probe+0x7bf/0xbd0
[ 1446.720265] virtio_dev_probe+0x402/0x6c0
[ 1446.720808] really_probe+0x276/0xde0
[ 1446.721320] driver_probe_device+0x267/0x3d0
[ 1446.721892] device_driver_attach+0xfe/0x140
[ 1446.722491] __driver_attach+0x13a/0x2c0
[ 1446.723037] bus_for_each_dev+0x146/0x1c0
[ 1446.723603] bus_add_driver+0x3fc/0x680
[ 1446.724145] driver_register+0x1c0/0x400
[ 1446.724693] init+0xa2/0xe8
[ 1446.725091] do_one_initcall+0x9e/0x310
[ 1446.725626] kernel_init_freeable+0xc56/0xcb9
[ 1446.726231] kernel_init+0x11/0x198
[ 1446.726714] ret_from_fork+0x1f/0x30
[ 1446.727212]
[ 1446.727433] Freed by task 26992:
[ 1446.727882] kasan_save_stack+0x19/0x40
[ 1446.728420] kasan_set_track+0x1c/0x30
[ 1446.728943] kasan_set_free_info+0x1b/0x30
[ 1446.729517] __kasan_slab_free+0x111/0x160
[ 1446.730084] kfree+0xb8/0x520
[ 1446.730507] blk_mq_free_map_and_requests+0x10b/0x1b0
[ 1446.731206] blk_mq_realloc_hw_ctxs+0x8cb/0x15b0
[ 1446.731844] blk_mq_init_allocated_queue+0x374/0x1380
[ 1446.732540] blk_mq_init_queue_data+0x7f/0xd0
[ 1446.733155] scsi_mq_alloc_queue+0x45/0x170
[ 1446.733730] scsi_alloc_sdev+0x73c/0xb20
[ 1446.734281] scsi_probe_and_add_lun+0x9a6/0x2d90
[ 1446.734916] __scsi_scan_target+0x208/0xc50
[ 1446.735500] scsi_scan_channel.part.3+0x113/0x170
[ 1446.736149] scsi_scan_host_selected+0x25a/0x360
[ 1446.736783] store_scan+0x290/0x2d0
[ 1446.737275] dev_attr_store+0x55/0x80
[ 1446.737782] sysfs_kf_write+0x132/0x190
[ 1446.738313] kernfs_fop_write_iter+0x319/0x4b0
[ 1446.738921] new_sync_write+0x40e/0x5c0
[ 1446.739429] vfs_write+0x519/0x720
[ 1446.739877] ksys_write+0xf8/0x1f0
[ 1446.740332] do_syscall_64+0x2d/0x40
[ 1446.740802] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1446.741462]
[ 1446.741670] The buggy address belongs to the object at ffff8880185afd00
[ 1446.741670] which belongs to the cache kmalloc-256 of size 256
[ 1446.743276] The buggy address is located 16 bytes inside of
[ 1446.743276] 256-byte region [ffff8880185afd00, ffff8880185afe00)
[ 1446.744765] The buggy address belongs to the page:
[ 1446.745416] page:ffffea0000616b00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x185ac
[ 1446.746694] head:ffffea0000616b00 order:2 compound_mapcount:0 compound_pincount:0
[ 1446.747719] flags: 0x1fffff80010200(slab|head)
[ 1446.748337] raw: 001fffff80010200 ffffea00006a3208 ffffea000061bf08 ffff88801004f240
[ 1446.749404] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
[ 1446.750455] page dumped because: kasan: bad access detected
[ 1446.751227]
[ 1446.751445] Memory state around the buggy address:
[ 1446.752102] ffff8880185afc00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1446.753090] ffff8880185afc80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1446.754079] >ffff8880185afd00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1446.755065] ^
[ 1446.755589] ffff8880185afd80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1446.756574] ffff8880185afe00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1446.757566] ==================================================================
Flag 'BLK_MQ_F_TAG_QUEUE_SHARED' will be set if the second device on the
same host initializes it's queue successfully. However, if the second
device failed to allocate memory in blk_mq_alloc_and_init_hctx() from
blk_mq_realloc_hw_ctxs() from blk_mq_init_allocated_queue(),
__blk_mq_free_map_and_rqs() will be called on error path, and if
'BLK_MQ_TAG_HCTX_SHARED' is not set, 'tag_set->tags' will be freed
while it's still used by the first device.
To fix this issue we move release newly allocated hardware context from
blk_mq_realloc_hw_ctxs to __blk_mq_update_nr_hw_queues. As there is needn't to
release hardware context in blk_mq_init_allocated_queue.
Fixes: 868f2f0b7206 ("blk-mq: dynamic h/w context count")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211108074019.1058843-1-yebin10@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have new helpers for this, use them rather than the slower inode
size reads. This makes the read/write path consistent with most of
the rest of block as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/a72767cd-3c6d-47f7-80f4-aa025a17b2cb@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 83cbce957446 ("block: add error handling for device_add_disk /
add_disk") added error handling to device_add_disk(), however the goto
label for the kobject_create_and_add() failure did not set the return
value correctly, and so we can end up in a situation where
kobject_create_and_add() fails but we report success.
Fixes: 83cbce957446 ("block: add error handling for device_add_disk / add_disk")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211103164023.1384821-1-mcgrof@kernel.org
[axboe: fold in followup fix from Wu Bo <wubo40@huawei.com>]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we're driving multiple devices, we could have pre-populated the cache
for a different device. Ensure that the empty request matches the current
queue.
Fixes: 47c122e35d7e ("block: pre-allocate requests if plug is started and is a batch")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Retain the old logic for the fops based submit, but for our internal
blk_mq_submit_bio(), move the queue entering logic into the core
function itself.
We need to be a bit careful if going into the scheduler, as a scheduler
or queue mappings can arbitrarily change before we have entered the queue.
Have the bio scheduler mapping do that separately, it's a very cheap
operation compared to actually doing merging locking and lookups.
Reviewed-by: Christoph Hellwig <hch@lst.de>
[axboe: update to check merge post submit_bio_checks() doing remap...]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just a prep patch for shifting the queue enter logic. This moves the
expected fast path inline, and leaves __bio_queue_enter() as an
out-of-line function call. We don't want to inline the latter, as it's
mostly slow path code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is in preparation for a fix, but serves as a cleanup as well moving
the cached vs regular alloc logic out of blk_mq_submit_bio().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Requests that were stored in the cache deliberately didn't hold an enter
reference to the queue, instead we grabbed one every time we pulled a
request out of there. That made for awkward logic on freeing the remainder
of the cached list, if needed, where we had to artificially raise the
queue usage count before each free.
Grab references up front for cached plug requests. That's safer, and also
more efficient.
Fixes: 47c122e35d7e ("block: pre-allocate requests if plug is started and is a batch")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__register_blkdev() is used to register a probe callback, and
that callback is typically used to call add_disk(). Now that
we are able to capture errors for add_disk(), we need to fix
those probe calls where add_disk() fails and clean up resources.
We don't extend the probe call to return the error given:
1) we'd have to always special-case the case where the disk
was already present, as otherwise concurrent requests to
open an existing block device would fail, and this would be
a userspace visible change
2) the error from ilookup() on blkdev_get_no_open() is sufficient
3) The only thing the probe call is used for is to support
pre-devtmpfs, pre-udev semantics that want to create disks when
their pre-created device node is accessed, and so we don't care
for failures on probe there.
Expand documentation for the probe callback to ensure users cleanup
resources if add_disk() is used and to clarify this interface may be
removed in the future.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211103230437.1639990-12-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In case of shared tags and none io sched, batched completion still may
be run into, and hctx->nr_active is accounted when getting driver tag,
so it has to be updated in blk_mq_end_request_batch().
Otherwise, hctx->nr_active may become same with queue depth, then
hctx_may_queue() always return false, then io hang is caused.
Fixes the issue by updating the counter in batched way.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: f794f3351f26 ("block: add support for blk_mq_end_request_batch()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211102153619.3627505-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Looks it is missed so add it.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211102133502.3619184-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It is obvious that io merge can't be done between two different queues, so
just try to run io merge in case of same queue.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211102133502.3619184-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's not safe to do this before blk_queue_enter(), as the scheduler state
could have changed in between. Hence move the RQF_ELV setting into the
allocators, where we know the queue is already entered.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A previous commit fixed up the condition for doing direct issue, but that
left the 'from_schedule' argument dead inside the branch. Replace it with
'false'.
Fixes: ff1552232b36 ("blk-mq: don't issue request directly in case that current is to be blocked")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ensure that current tag is correctly assigned before attempting
to prefetch the first cacheline of the request.
Fixes: 92aff191cc5b ("block: prefetch request to be initialized")
Reported-and-tested-by: syzbot+cd20829ac44b92bf6ed0@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block inode sync updates from Jens Axboe:
"This contains improvements to how bdev inode syncing is handled,
unifying the API"
* tag 'for-5.16/inode-sync-2021-10-29' of git://git.kernel.dk/linux-block:
block: simplify the block device syncing code
ntfs3: use sync_blockdev_nowait
fat: use sync_blockdev_nowait
btrfs: use sync_blockdev
xen-blkback: use sync_blockdev
block: remove __sync_blockdev
fs: remove __sync_filesystem
|
|
Pull kiocb->ki_complete() cleanup from Jens Axboe:
"This removes the res2 argument from kiocb->ki_complete().
Only the USB gadget code used it, everybody else passes 0. The USB
guys checked the user gadget code they could find, and everybody just
uses res as expected for the async interface"
* tag 'for-5.16/ki_complete-2021-10-29' of git://git.kernel.dk/linux-block:
fs: get rid of the res2 iocb->ki_complete argument
usb: remove res2 argument from gadget code completions
|
|
git://git.kernel.dk/linux-block
Pull QUEUE_FLAG_SCSI_PASSTHROUGH removal from Jens Axboe:
"This contains a series leading to the removal of the
QUEUE_FLAG_SCSI_PASSTHROUGH queue flag"
* tag 'for-5.16/passthrough-flag-2021-10-29' of git://git.kernel.dk/linux-block:
block: remove blk_{get,put}_request
block: remove QUEUE_FLAG_SCSI_PASSTHROUGH
block: remove the initialize_rq_fn blk_mq_ops method
scsi: add a scsi_alloc_request helper
bsg-lib: initialize the bsg_job in bsg_transport_sg_io_fn
nfsd/blocklayout: use ->get_unique_id instead of sending SCSI commands
sd: implement ->get_unique_id
block: add a ->get_unique_id method
|
|
Pull bdev size cleanups from Jens Axboe:
"Clean up the bdev size handling with new bdev_nr_bytes() helper"
* tag 'for-5.16/bdev-size-2021-10-29' of git://git.kernel.dk/linux-block: (34 commits)
partitions/ibm: use bdev_nr_sectors instead of open coding it
partitions/efi: use bdev_nr_bytes instead of open coding it
block/ioctl: use bdev_nr_sectors and bdev_nr_bytes
block: cache inode size in bdev
udf: use sb_bdev_nr_blocks
reiserfs: use sb_bdev_nr_blocks
ntfs: use sb_bdev_nr_blocks
jfs: use sb_bdev_nr_blocks
ext4: use sb_bdev_nr_blocks
block: add a sb_bdev_nr_blocks helper
block: use bdev_nr_bytes instead of open coding it in blkdev_fallocate
squashfs: use bdev_nr_bytes instead of open coding it
reiserfs: use bdev_nr_bytes instead of open coding it
pstore/blk: use bdev_nr_bytes instead of open coding it
ntfs3: use bdev_nr_bytes instead of open coding it
nilfs2: use bdev_nr_bytes instead of open coding it
nfs/blocklayout: use bdev_nr_bytes instead of open coding it
jfs: use bdev_nr_bytes instead of open coding it
hfsplus: use bdev_nr_sectors instead of open coding it
hfs: use bdev_nr_sectors instead of open coding it
...
|
|
Pull block updates from Jens Axboe:
- mq-deadline accounting improvements (Bart)
- blk-wbt timer fix (Andrea)
- Untangle the block layer includes (Christoph)
- Rework the poll support to be bio based, which will enable adding
support for polling for bio based drivers (Christoph)
- Block layer core support for multi-actuator drives (Damien)
- blk-crypto improvements (Eric)
- Batched tag allocation support (me)
- Request completion batching support (me)
- Plugging improvements (me)
- Shared tag set improvements (John)
- Concurrent queue quiesce support (Ming)
- Cache bdev in ->private_data for block devices (Pavel)
- bdev dio improvements (Pavel)
- Block device invalidation and block size improvements (Xie)
- Various cleanups, fixes, and improvements (Christoph, Jackie,
Masahira, Tejun, Yu, Pavel, Zheng, me)
* tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits)
blk-mq-debugfs: Show active requests per queue for shared tags
block: improve readability of blk_mq_end_request_batch()
virtio-blk: Use blk_validate_block_size() to validate block size
loop: Use blk_validate_block_size() to validate block size
nbd: Use blk_validate_block_size() to validate block size
block: Add a helper to validate the block size
block: re-flow blk_mq_rq_ctx_init()
block: prefetch request to be initialized
block: pass in blk_mq_tags to blk_mq_rq_ctx_init()
block: add rq_flags to struct blk_mq_alloc_data
block: add async version of bio_set_polled
block: kill DIO_MULTI_BIO
block: kill unused polling bits in __blkdev_direct_IO()
block: avoid extra iter advance with async iocb
block: Add independent access ranges support
blk-mq: don't issue request directly in case that current is to be blocked
sbitmap: silence data race warning
blk-cgroup: synchronize blkg creation against policy deactivation
block: refactor bio_iov_bvec_set()
block: add single bio async direct IO helper
...
|
|
In the if branch, e is checked. In the else branch, ->dispatch_busy is
merely a number and has no effect on !e. We should remove the check of
!e since it is always true.
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Link: https://lore.kernel.org/r/20211029202945.3052-1-sakiwit@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request:
- fix nvmet-tcp header digest verification (Amit Engel)
- fix a memory leak in nvmet-tcp when releasing a queue (Maurizio
Lombardi)
- fix nvme-tcp H2CData PDU send accounting again (Sagi Grimberg)
- fix digest pointer calculation in nvme-tcp and nvmet-tcp (Varun
Prakash)
- fix possible nvme-tcp req->offset corruption (Varun Prakash)
- Queue drain ordering fix (Ming)
- Partition check regression for zoned devices (Shin'ichiro)
- Zone queue restart fix (Naohiro)
* tag 'block-5.15-2021-10-29' of git://git.kernel.dk/linux-block:
block: Fix partition check for host-aware zoned block devices
nvmet-tcp: fix header digest verification
nvmet-tcp: fix data digest pointer calculation
nvme-tcp: fix data digest pointer calculation
nvme-tcp: fix possible req->offset corruption
block: schedule queue restart after BLK_STS_ZONE_RESOURCE
block: drain queue after disk is removed from sysfs
nvme-tcp: fix H2CData PDU send accounting (again)
nvmet-tcp: fix a memory leak when releasing a queue
|
|
Currently we show the hctx.active value for the per-hctx "active" file.
However this is not maintained for shared tags, and we instead keep a
record of the number active requests per request queue - see commit
f1b49fdc1c64 ("blk-mq: Record active_queues_shared_sbitmap per tag_set for
when using shared sbitmap).
Change for the case of shared tags to show the active requests per request
queue by using __blk_mq_active_requests() helper.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1635496823-33515-1-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
These are now pointless wrappers around blk_mq_{alloc,free}_request,
so remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211025070517.1548584-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's faster and easier to read if we tolerate cur_hctx being NULL in
the "when to flush" condition. Rename last_hctx to cur_hctx while at it,
as it better describes the role of that variable.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that we have flags passed in, we can do a final re-arrange of the
flow of blk_mq_rq_ctx_init() so we're always writing request in the
order in which it is laid out.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20211019153300.623322-5-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now we have the tags available in __blk_mq_alloc_requests_batch(), we
can start fetching the first request cacheline before calling into the
request initialization.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20211019153300.623322-4-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of getting this from data for every invocation of request
initialization, pass it in as an argument instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20211019153300.623322-3-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There's a hole here we can use, and it's faster to set this earlier
rather than need to check q->elevator multiple times.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20211019153300.623322-2-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit a33df75c6328 ("block: use an xarray for disk->part_tbl") modified
the method to check partition existence in host-aware zoned block
devices from disk_has_partitions() helper function call to empty check
of xarray disk->part_tbl. However, disk->part_tbl always has single
entry for disk->part0 and never becomes empty. This resulted in the
host-aware zoned devices always judged to have partitions, and it made
the sysfs queue/zoned attribute to be "none" instead of "host-aware"
regardless of partition existence in the devices.
This also caused DEBUG_LOCKS_WARN_ON(lock->magic != lock) for
sdkp->rev_mutex in scsi layer when the kernel detects host-aware zoned
device. Since block layer handled the host-aware zoned devices as non-
zoned devices, scsi layer did not have chance to initialize the mutex
for zone revalidation. Therefore, the warning was triggered.
To fix the issues, call the helper function disk_has_partitions() in
place of disk->part_tbl empty check. Since the function was removed with
the commit a33df75c6328, reimplement it to walk through entries in the
xarray disk->part_tbl.
Fixes: a33df75c6328 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: stable@vger.kernel.org # v5.14+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211026060115.753746-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we know that a iocb is async we can optimise bio_set_polled() a bit,
add a new helper bio_set_polled_async().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8fa137885164a5d05fadcff4c3521da8d5a83d00.1635337135.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now __blkdev_direct_IO() serves only multi-bio I/O, thus remove
not used anymore single bio refcounting optimisations.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/88eb488aae9ed4852a30f3a7132f296f56e43b80.1635337135.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With addition of __blkdev_direct_IO_async(), __blkdev_direct_IO() now
serves only multio-bio I/O, which we don't poll. Now we can remove
anything related to I/O polling from it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b8c597a6b7ee612df394853bfd24726aee5b898e.1635337135.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Nobody cares about iov iterators state if we return -EIOCBQUEUED, so as
the we now have __blkdev_direct_IO_async(), which gets pages only once,
we can skip expensive iov_iter_advance(). It's around 1-2% of all CPU
spent.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a6158edfbfa2ae3bc24aed29a72f035df18fad2f.1635337135.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The Concurrent Positioning Ranges VPD page (for SCSI) and data log page
(for ATA) contain parameters describing the set of contiguous LBAs that
can be served independently by a single LUN multi-actuator hard-disk.
Similarly, a logically defined block device composed of multiple disks
can in some cases execute requests directed at different sector ranges
in parallel. A dm-linear device aggregating 2 block devices together is
an example.
This patch implements support for exposing a block device independent
access ranges to the user through sysfs to allow optimizing device
accesses to increase performance.
To describe the set of independent sector ranges of a device (actuators
of a multi-actuator HDDs or table entries of a dm-linear device),
The type struct blk_independent_access_ranges is introduced. This
structure describes the sector ranges using an array of
struct blk_independent_access_range structures. This range structure
defines the start sector and number of sectors of the access range.
The ranges in the array cannot overlap and must contain all sectors
within the device capacity.
The function disk_set_independent_access_ranges() allows a device
driver to signal to the block layer that a device has multiple
independent access ranges. In this case, a struct
blk_independent_access_ranges is attached to the device request queue
by the function disk_set_independent_access_ranges(). The function
disk_alloc_independent_access_ranges() is provided for drivers to
allocate this structure.
struct blk_independent_access_ranges contains kobjects (struct kobject)
to expose to the user through sysfs the set of independent access ranges
supported by a device. When the device is initialized, sysfs
registration of the ranges information is done from blk_register_queue()
using the block layer internal function
disk_register_independent_access_ranges(). If a driver calls
disk_set_independent_access_ranges() for a registered queue, e.g. when a
device is revalidated, disk_set_independent_access_ranges() will execute
disk_register_independent_access_ranges() to update the sysfs attribute
files. The sysfs file structure created starts from the
independent_access_ranges sub-directory and contains the start sector
and number of sectors of each range, with the information for each range
grouped in numbered sub-directories.
E.g. for a dual actuator HDD, the user sees:
$ tree /sys/block/sdk/queue/independent_access_ranges/
/sys/block/sdk/queue/independent_access_ranges/
|-- 0
| |-- nr_sectors
| `-- sector
`-- 1
|-- nr_sectors
`-- sector
For a regular device with a single access range, the
independent_access_ranges sysfs directory does not exist.
Device revalidation may lead to changes to this structure and to the
attribute values. When manipulated, the queue sysfs_lock and
sysfs_dir_lock mutexes are held for atomicity, similarly to how the
blk-mq and elevator sysfs queue sub-directories are protected.
The code related to the management of independent access ranges is
added in the new file block/blk-ia-ranges.c.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When dispatching a zone append write request to a SCSI zoned block device,
if the target zone of the request is already locked, the device driver will
return BLK_STS_ZONE_RESOURCE and the request will be pushed back to the
hctx dipatch queue. The queue will be marked as RESTART in
dd_finish_request() and restarted in __blk_mq_free_request(). However, this
restart applies to the hctx of the completed request. If the requeued
request is on a different hctx, dispatch will no be retried until another
request is submitted or the next periodic queue run triggers, leading to up
to 30 seconds latency for the requeued request.
Fix this problem by scheduling a queue restart similarly to the
BLK_STS_RESOURCE case or when we cannot get the budget.
Also, consolidate the checks into the "need_resource" variable to simplify
the condition.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Niklas Cassel <Niklas.Cassel@wdc.com>
Link: https://lore.kernel.org/r/20211026165127.4151055-1-naohiro.aota@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Before removing disk from sysfs, userspace still may change queue via
sysfs, such as switching elevator or setting wbt latency, both may
reinitialize wbt, then the warning in blk_free_queue_stats() will be
triggered since rq_qos_exit() is moved to del_gendisk().
Fixes the issue by moving draining queue & tearing down after disk is
removed from sysfs, at that time no one can come into queue's
store()/show().
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211026101204.2897166-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When flushing plug list in case that current will be blocked, we can't
issue request directly because ->queue_rq() may sleep, otherwise scheduler
may complain.
Fixes: dc5fc361d891 ("block: attempt direct issue of plug list")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211026082257.2889890-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The second argument was only used by the USB gadget code, yet everyone
pays the overhead of passing a zero to be passed into aio, where it
ends up being part of the aio res2 value.
Now that everybody is passing in zero, kill off the extra argument.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Our test reports a null pointer dereference:
[ 168.534653] ==================================================================
[ 168.535614] Disabling lock debugging due to kernel taint
[ 168.536346] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 168.537274] #PF: supervisor read access in kernel mode
[ 168.537964] #PF: error_code(0x0000) - not-present page
[ 168.538667] PGD 0 P4D 0
[ 168.539025] Oops: 0000 [#1] PREEMPT SMP KASAN
[ 168.539656] CPU: 13 PID: 759 Comm: bash Tainted: G B 5.15.0-rc2-next-202100
[ 168.540954] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_0738364
[ 168.542736] RIP: 0010:bfq_pd_init+0x88/0x1e0
[ 168.543318] Code: 98 00 00 00 e8 c9 e4 5b ff 4c 8b 65 00 49 8d 7c 24 08 e8 bb e4 5b ff 4d0
[ 168.545803] RSP: 0018:ffff88817095f9c0 EFLAGS: 00010002
[ 168.546497] RAX: 0000000000000001 RBX: ffff888101a1c000 RCX: 0000000000000000
[ 168.547438] RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff888106553428
[ 168.548402] RBP: ffff888106553400 R08: ffffffff961bcaf4 R09: 0000000000000001
[ 168.549365] R10: ffffffffa2e16c27 R11: fffffbfff45c2d84 R12: 0000000000000000
[ 168.550291] R13: ffff888101a1c098 R14: ffff88810c7a08c8 R15: ffffffffa55541a0
[ 168.551221] FS: 00007fac75227700(0000) GS:ffff88839ba80000(0000) knlGS:0000000000000000
[ 168.552278] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 168.553040] CR2: 0000000000000008 CR3: 0000000165ce7000 CR4: 00000000000006e0
[ 168.554000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 168.554929] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 168.555888] Call Trace:
[ 168.556221] <TASK>
[ 168.556510] blkg_create+0x1c0/0x8c0
[ 168.556989] blkg_conf_prep+0x574/0x650
[ 168.557502] ? stack_trace_save+0x99/0xd0
[ 168.558033] ? blkcg_conf_open_bdev+0x1b0/0x1b0
[ 168.558629] tg_set_conf.constprop.0+0xb9/0x280
[ 168.559231] ? kasan_set_track+0x29/0x40
[ 168.559758] ? kasan_set_free_info+0x30/0x60
[ 168.560344] ? tg_set_limit+0xae0/0xae0
[ 168.560853] ? do_sys_openat2+0x33b/0x640
[ 168.561383] ? do_sys_open+0xa2/0x100
[ 168.561877] ? __x64_sys_open+0x4e/0x60
[ 168.562383] ? __kasan_check_write+0x20/0x30
[ 168.562951] ? copyin+0x48/0x70
[ 168.563390] ? _copy_from_iter+0x234/0x9e0
[ 168.563948] tg_set_conf_u64+0x17/0x20
[ 168.564467] cgroup_file_write+0x1ad/0x380
[ 168.565014] ? cgroup_file_poll+0x80/0x80
[ 168.565568] ? __mutex_lock_slowpath+0x30/0x30
[ 168.566165] ? pgd_free+0x100/0x160
[ 168.566649] kernfs_fop_write_iter+0x21d/0x340
[ 168.567246] ? cgroup_file_poll+0x80/0x80
[ 168.567796] new_sync_write+0x29f/0x3c0
[ 168.568314] ? new_sync_read+0x410/0x410
[ 168.568840] ? __handle_mm_fault+0x1c97/0x2d80
[ 168.569425] ? copy_page_range+0x2b10/0x2b10
[ 168.570007] ? _raw_read_lock_bh+0xa0/0xa0
[ 168.570622] vfs_write+0x46e/0x630
[ 168.571091] ksys_write+0xcd/0x1e0
[ 168.571563] ? __x64_sys_read+0x60/0x60
[ 168.572081] ? __kasan_check_write+0x20/0x30
[ 168.572659] ? do_user_addr_fault+0x446/0xff0
[ 168.573264] __x64_sys_write+0x46/0x60
[ 168.573774] do_syscall_64+0x35/0x80
[ 168.574264] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 168.574960] RIP: 0033:0x7fac74915130
[ 168.575456] Code: 73 01 c3 48 8b 0d 58 ed 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 444
[ 168.577969] RSP: 002b:00007ffc3080e288 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 168.578986] RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007fac74915130
[ 168.579937] RDX: 0000000000000009 RSI: 000056007669f080 RDI: 0000000000000001
[ 168.580884] RBP: 000056007669f080 R08: 000000000000000a R09: 00007fac75227700
[ 168.581841] R10: 000056007655c8f0 R11: 0000000000000246 R12: 0000000000000009
[ 168.582796] R13: 0000000000000001 R14: 00007fac74be55e0 R15: 00007fac74be08c0
[ 168.583757] </TASK>
[ 168.584063] Modules linked in:
[ 168.584494] CR2: 0000000000000008
[ 168.584964] ---[ end trace 2475611ad0f77a1a ]---
This is because blkg_alloc() is called from blkg_conf_prep() without
holding 'q->queue_lock', and elevator is exited before blkg_create():
thread 1 thread 2
blkg_conf_prep
spin_lock_irq(&q->queue_lock);
blkg_lookup_check -> return NULL
spin_unlock_irq(&q->queue_lock);
blkg_alloc
blkcg_policy_enabled -> true
pd = ->pd_alloc_fn
blkg->pd[i] = pd
blk_mq_exit_sched
bfq_exit_queue
blkcg_deactivate_policy
spin_lock_irq(&q->queue_lock);
__clear_bit(pol->plid, q->blkcg_pols);
spin_unlock_irq(&q->queue_lock);
q->elevator = NULL;
spin_lock_irq(&q->queue_lock);
blkg_create
if (blkg->pd[i])
->pd_init_fn -> q->elevator is NULL
spin_unlock_irq(&q->queue_lock);
Because blkcg_deactivate_policy() requires queue to be frozen, we can
grab q_usage_counter to synchoronize blkg_conf_prep() against
blkcg_deactivate_policy().
Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20211020014036.2141723-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Combine bio_iov_bvec_set() and bio_iov_bvec_set_append() and let the
caller to do iov_iter_advance(). Also get rid of __bio_iov_bvec_set(),
which was duplicated in the final binary, and replace a weird
iov_iter_truncate() of a temporal iter copy with min() better reflecting
the intention.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/bcf1ac36fce769a514e19475f3623cd86a1d8b72.1635006010.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As with __blkdev_direct_IO_simple(), we can implement direct IO more
efficiently if there is only one bio. Add __blkdev_direct_IO_async() and
blkdev_bio_end_io_async(). This patch brings me from 4.45-4.5 MIOPS with
nullblk to 4.7+.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f0ae4109b7a6934adede490f84d188d53b97051b.1635006010.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
"Fix for the cgroup code not ussing irq safe stats updates, and one fix
for an error handling condition in add_partition()"
* tag 'block-5.15-2021-10-22' of git://git.kernel.dk/linux-block:
block: fix incorrect references to disk objects
blk-cgroup: blk_cgroup_bio_start() should use irq-safe operations on blkg->iostat_cpu
|
|
We should not reference the queue tagset in blk_mq_sched_tags_teardown()
(see function comment) for the blk-mq flags, so use the passed flags
instead.
This solves a use-after-free, similarly fixed earlier (and since broken
again) in commit f0c1c4d2864e ("blk-mq: fix use-after-free in
blk_mq_exit_sched").
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Fixes: e155b0c238b2 ("blk-mq: Use shared tags for shared sbitmap support")
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1634890340-15432-1-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Shinichiro Kawasaki reports that there is a bug in a recent
req_bio_endio() patch causing problems with zonefs. As Shinichiro
suggested, inverse the condition in zone append path to resemble how it
was before: fail when it's not fully completed.
Fixes: 478eb72b815f3 ("block: optimise req_bio_endio()")
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/344ea4e334aace9148b41af5f2426da38c8aa65a.1634914228.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Get rid of the indirections and just provide a sync_bdevs
helper for the generic sync code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211019062530.2174626-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
