| Age | Commit message (Collapse) | Author |
|---|
|
My UEK-derived config has 1030 files depending on pagemap.h before this
change. Afterwards, just 326 files need to be rebuilt when I touch
pagemap.h. I think blkdev.h is probably included too widely, but
untangling that dependency is harder and this solves my problem. x86
allmodconfig builds, but there may be implicit include problems on other
architectures.
Link: https://lkml.kernel.org/r/20210309195747.283796-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Dan Williams <dan.j.williams@intel.com> [nvdimm]
Acked-by: Jens Axboe <axboe@kernel.dk> [block]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Martin K. Petersen <martin.petersen@oracle.com> [scsi]
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Current users of the rstat code can source root-level statistics from
the native counters of their respective subsystem, allowing them to
forego aggregation at the root level. This optimization is currently
implemented inside the generic rstat code, which doesn't track the root
cgroup and doesn't invoke the subsystem flush callbacks on it.
However, the memory controller cannot do this optimization, because
cgroup1 breaks out memory specifically for the local level, including at
the root level. In preparation for the memory controller switching to
rstat, move the optimization from rstat core to the controllers.
Afterwards, rstat will always track the root cgroup for changes and
invoke the subsystem callbacks on it; and it's up to the subsystem to
special-case and skip aggregation of the root cgroup if it can source
this information through other, cheaper means.
This is the case for the io controller and the cgroup base stats. In
their respective flush callbacks, check whether the parent is the root
cgroup, and if so, skip the unnecessary upward propagation.
The extra cost of tracking the root cgroup is negligible: on stat
changes, we actually remove a branch that checks for the root. The
queueing for a flush touches only per-cpu data, and only the first stat
change since a flush requires a (per-cpu) lock.
Link: https://lkml.kernel.org/r/20210209163304.77088-6-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, target, tcmu,
smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).
The major core change is using a sbitmap instead of an atomic for
queue tracking"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits)
scsi: target: tcm_fc: Fix a kernel-doc header
scsi: target: Shorten ALUA error messages
scsi: target: Fix two format specifiers
scsi: target: Compare explicitly with SAM_STAT_GOOD
scsi: sd: Introduce a new local variable in sd_check_events()
scsi: dc395x: Open-code status_byte(u8) calls
scsi: 53c700: Open-code status_byte(u8) calls
scsi: smartpqi: Remove unused functions
scsi: qla4xxx: Remove an unused function
scsi: myrs: Remove unused functions
scsi: myrb: Remove unused functions
scsi: mpt3sas: Fix two kernel-doc headers
scsi: fcoe: Suppress a compiler warning
scsi: libfc: Fix a format specifier
scsi: aacraid: Remove an unused function
scsi: core: Introduce enum scsi_disposition
scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case
scsi: core: Rename scsi_softirq_done() into scsi_complete()
scsi: core: Remove an incorrect comment
scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
...
|
|
Pull block updates from Jens Axboe:
"Pretty quiet round this time, which is nice. In detail:
- Series revamping bounce buffer support (Christoph)
- Dead code removal (Christoph, Bart)
- Partition iteration revamp, now using xarray (Christoph)
- Passthrough request scheduler improvements (Lin)
- Series of BFQ improvements (Paolo)
- Fix ioprio task iteration (Peter)
- Various little tweaks and fixes (Tejun, Saravanan, Bhaskar, Max,
Nikolay)"
* tag 'for-5.13/block-2021-04-27' of git://git.kernel.dk/linux-block: (41 commits)
blk-iocost: don't ignore vrate_min on QD contention
blk-mq: Fix spurious debugfs directory creation during initialization
bfq/mq-deadline: remove redundant check for passthrough request
blk-mq: bypass IO scheduler's limit_depth for passthrough request
block: Remove an obsolete comment from sg_io()
block: move bio_list_copy_data to pktcdvd
block: remove zero_fill_bio_iter
block: add queue_to_disk() to get gendisk from request_queue
block: remove an incorrect check from blk_rq_append_bio
block: initialize ret in bdev_disk_changed
block: Fix sys_ioprio_set(.which=IOPRIO_WHO_PGRP) task iteration
block: remove disk_part_iter
block: simplify diskstats_show
block: simplify show_partition
block: simplify printk_all_partitions
block: simplify partition_overlaps
block: simplify partition removal
block: take bd_mutex around delete_partitions in del_gendisk
block: refactor blk_drop_partitions
block: move more syncing and invalidation to delete_partition
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
|
|
ioc_adjust_base_vrate() ignored vrate_min when rq_wait_pct indicates that
there is QD contention. The reasoning was that QD depletion always reliably
indicates device saturation and thus it's safe to override user specified
vrate_min. However, this sometimes leads to unnecessary throttling,
especially on really fast devices, because vrate adjustments have delays and
inertia. It also confuses users because the behavior violates the explicitly
specified configuration.
This patch drops the special case handling so that vrate_min is always
applied.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/YIIo1HuyNmhDeiNx@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The switch to go through blkdev_get_by_dev means we now ignore the
return value from bdev_disk_changed in __blkdev_get. Add a manual
check to restore the old semantics.
Fixes: 4601b4b130de ("block: reopen the device in blkdev_reread_part")
Reported-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210421160502.447418-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_debugfs_register_sched_hctx() called from
device_add_disk()->elevator_init_mq()->blk_mq_init_sched()
initialization sequence does not have relevant parent directory
setup and thus spuriously attempts "sched" directory creation
from root mount of debugfs for every hw queue detected on the
block device
dmesg
...
debugfs: Directory 'sched' with parent '/' already present!
debugfs: Directory 'sched' with parent '/' already present!
.
.
debugfs: Directory 'sched' with parent '/' already present!
...
The parent debugfs directory for hw queues get properly setup
device_add_disk()->blk_register_queue()->blk_mq_debugfs_register()
->blk_mq_debugfs_register_hctx() later in the block device
initialization sequence.
A simple check for debugfs_dir has been added to thwart premature
debugfs directory/file creation attempts.
Signed-off-by: Saravanan D <saravanand@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit 01e99aeca39796003 'blk-mq: insert passthrough request into
hctx->dispatch directly', passthrough request should not appear in
IO-scheduler any more, so blk_rq_is_passthrough checking in addon IO
schedulers is redundant.
(Notes: this patch passes generic IO load test with hdds under SAS
controller and hdds under AHCI controller but obviously not covers all.
Not sure if passthrough request can still escape into IO scheduler from
blk_mq_sched_insert_requests, which is used by blk_mq_flush_plug_list and
has lots of indirect callers.)
Signed-off-by: Lin Feng <linf@wangsu.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 01e99aeca39796003 ("blk-mq: insert passthrough request into
hctx->dispatch directly") gives high priority to passthrough requests and
bypass underlying IO scheduler. But as we allocate tag for such request it
still runs io-scheduler's callback limit_depth, while we really want is to
give full sbitmap-depth capabity to such request for acquiring available
tag.
blktrace shows PC requests(dmraid -s -c -i) hit bfq's limit_depth:
8,0 2 0 0.000000000 39952 1,0 m N bfq [bfq_limit_depth] wr_busy 0 sync 0 depth 8
8,0 2 1 0.000008134 39952 D R 4 [dmraid]
8,0 2 2 0.000021538 24 C R [0]
8,0 2 0 0.000035442 39952 1,0 m N bfq [bfq_limit_depth] wr_busy 0 sync 0 depth 8
8,0 2 3 0.000038813 39952 D R 24 [dmraid]
8,0 2 4 0.000044356 24 C R [0]
This patch introduce a new wrapper to make code not that ugly.
Signed-off-by: Lin Feng <linf@wangsu.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210415033920.213963-1-linf@wangsu.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit b7819b925918 ("block: remove the blk_execute_rq return value")
changed the return type of blk_execute_rq() from int into void. That
change made a comment in sg_io() obsolete. Hence remove that comment.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20210413034142.23460-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_list_copy_data is only used by pktcdvd, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210412134658.2623190-2-hch@lst.de
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
zero_fill_bio_iter is only used to implement zero_fill_bio, so
remove the indirection.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210412134658.2623190-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_rq_append_bio is also used for the copy case, not just the map case,
so tis debug check is not correct.
Fixes: 393bb12e0058 ("block: stop calling blk_queue_bounce for passthrough requests")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210409150447.1977410-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
|
|
do_each_pid_thread() { } while_each_pid_thread() is a double loop and
thus break doesn't work as expected. Also, it should be used under
tasklist_lock because otherwise we can race against change_pid() for
PGID/SID.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/YG7Q5C4Rb5dx5GFx@hirez.programming.kicks-ass.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just open code the xa_for_each in the remaining user.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just use xa_for_each to iterate over the partitions as there is no need
to grab a reference to each partition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just use xa_for_each to iterate over the partitions as there is no need
to grab a reference to each partition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just use xa_for_each to iterate over the partitions as there is no need
to grab a reference to each partition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just use xa_for_each to iterate over the partitions as there is no need
to grab a reference to each partition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Always look up the first available entry instead of the complicated
stateful traversal.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is nothing preventing an ioctl from trying do delete partition
concurrenly with del_gendisk, so take open_mutex to serialize against
that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the busy check and disk-wide sync into the only caller, so that
the remainder can be shared with del_gendisk. Also pass the gendisk
instead of the bdev as that is all that is needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the calls to fsync_bdev and __invalidate_device from del_gendisk to
delete_partition. For the other two callers that check that there are
no openers for the delete partitions(s) the callouts are a no-op as no
file system can be mounted, but this keeps all the cleanup in one
place.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
invalidate_partition has two callers, one of which already performs
the remove_inode_hash just after the call. Just open code the
function in the two callsites.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the more general interface - the behavior is the same except
that now a change uevent is sent, which is the right thing to do
when the device becomes unusable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20210406062303.811835-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit e76239a3748c ("block: add a report_zones method") removed the last
blk_zone_start() call. Hence also remove the definition of this function.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406200820.15180-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Yanhui found that write performance is degraded a lot after applying
hctx shared tagset on one test machine with megaraid_sas. And turns out
it is caused by none scheduler which becomes default elevator caused by
hctx shared tagset patchset.
Given more scsi HBAs will apply hctx shared tagset, and the similar
performance exists for them too.
So keep previous behavior by still using default mq-deadline for queues
which apply hctx shared tagset, just like before.
Fixes: 32bc15afed04 ("blk-mq: Facilitate a shared sbitmap per tagset")
Reported-by: Yanhui Ma <yama@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20210406031933.767228-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of overloading the passthrough fast path with the deprecated
block layer bounce buffering let the users that combine an old
undermaintained driver with a highmem system pay the price by always
falling back to copies in that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210331073001.46776-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Get rid of all the PFN arithmetics and just use an enum for the two
remaining options, and use PageHighMem for the actual bounce decision.
Add a fast path to entirely avoid the call for the common case of a queue
not using the legacy bouncing code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210331073001.46776-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove the BLK_BOUNCE_ISA support now that all users are gone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210331073001.46776-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20210311081713.2763171-1-nborisov@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This entry will expose the bio vector alignment mask for a specific
block device.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210405132012.12504-1-mgurtovoy@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For multiple split bios, if one of the bio is fail, the whole
should return error to application. But we found there is a race
between bio_integrity_verify_fn and bio complete, which return
io success to application after one of the bio fail. The race as
following:
split bio(READ) kworker
nvme_complete_rq
blk_update_request //split error=0
bio_endio
bio_integrity_endio
queue_work(kintegrityd_wq, &bip->bip_work);
bio_integrity_verify_fn
bio_endio //split bio
__bio_chain_endio
if (!parent->bi_status)
<interrupt entry>
nvme_irq
blk_update_request //parent error=7
req_bio_endio
bio->bi_status = 7 //parent bio
<interrupt exit>
parent->bi_status = 0
parent->bi_end_io() // return bi_status=0
The bio has been split as two: split and parent. When split
bio completed, it depends on kworker to do endio, while
bio_integrity_verify_fn have been interrupted by parent bio
complete irq handler. Then, parent bio->bi_status which have
been set in irq handler will overwrite by kworker.
In fact, even without the above race, we also need to conside
the concurrency beteen mulitple split bio complete and update
the same parent bi_status. Normally, multiple split bios will
be issued to the same hctx and complete from the same irq
vector. But if we have updated queue map between multiple split
bios, these bios may complete on different hw queue and different
irq vector. Then the concurrency update parent bi_status may
cause the final status error.
Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210331115359.1125679-1-yuyufen@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit a33df75c6328 ("block: use an xarray for disk->part_tbl") drops the
check on max supported number of partitionsr, and allows partition with
bigger partition numbers to be added. However, ->bd_partno is defined as
u8, so partition index of xarray table may not match with ->bd_partno.
Then delete_partition() may delete one unmatched partition, and caused
use-after-free.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: syzbot+8fede7e30c7cee0de139@syzkaller.appspotmail.com
Fixes: a33df75c6328 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Many throughput-sensitive workloads are made of several parallel I/O
flows, with all flows generated by the same application, or more
generically by the same task (e.g., system boot). The most
counterproductive action with these workloads is plugging I/O dispatch
when one of the bfq_queues associated with these flows remains
temporarily empty.
To avoid this plugging, BFQ has been using a burst-handling mechanism
for years now. This mechanism has proven effective for throughput, and
not detrimental for service guarantees. This commit pushes this
mechanism a little bit further, basing on the following two facts.
First, all the I/O flows of a the same application or task contribute
to the execution/completion of that common application or task. So the
performance figures that matter are total throughput of the flows and
task-wide I/O latency. In particular, these flows do not need to be
protected from each other, in terms of individual bandwidth or
latency.
Second, the above fact holds regardless of the number of flows.
Putting these two facts together, this commits merges stably the
bfq_queues associated with these I/O flows, i.e., with the processes
that generate these IO/ flows, regardless of how many the involved
processes are.
To decide whether a set of bfq_queues is actually associated with the
I/O flows of a common application or task, and to merge these queues
stably, this commit operates as follows: given a bfq_queue, say Q2,
currently being created, and the last bfq_queue, say Q1, created
before Q2, Q2 is merged stably with Q1 if
- very little time has elapsed since when Q1 was created
- Q2 has the same ioprio as Q1
- Q2 belongs to the same group as Q1
Merging bfq_queues also reduces scheduling overhead. A fio test with
ten random readers on /dev/nullb shows a throughput boost of 40%, with
a quadcore. Since BFQ's execution time amounts to ~50% of the total
per-request processing time, the above throughput boost implies that
BFQ's overhead is reduced by more than 50%.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Link: https://lore.kernel.org/r/20210304174627.161-7-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Shared queues are likely to receive I/O at a high rate. This may
deceptively let them be considered as wakers of other queues. But a
false waker will unjustly steal bandwidth to its supposedly woken
queue. So considering also shared queues in the waking mechanism may
cause more control troubles than throughput benefits. This commit
keeps shared queues out of the waker-detection mechanism.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Link: https://lore.kernel.org/r/20210304174627.161-6-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the io_latency heuristic is off, bfq_queues must not start to be
weight-raised. Unfortunately, by mistake, this may happen when the
state of a previously weight-raised bfq_queue is resumed after a queue
split. This commit fixes this error.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Link: https://lore.kernel.org/r/20210304174627.161-5-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Consider a bfq_queue bfqq that is about to be merged with another
bfq_queue new_bfqq. The processes associated with bfqq are cooperators
of the processes associated with new_bfqq. So, if bfqq has a waker,
then it is reasonable (and beneficial for throughput) to assume that
all these processes will be happy to let bfqq's waker freely inject
I/O when they have no I/O. So this commit makes new_bfqq inherit
bfqq's waker.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Link: https://lore.kernel.org/r/20210304174627.161-4-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Consider a new I/O request that arrives for a bfq_queue bfqq. If, when
this happens, the only active bfq_queues are bfqq and either its waker
bfq_queue or one of its woken bfq_queues, then there is no point in
queueing this new I/O request in bfqq for service. In fact, the
in-service queue and bfqq agree on serving this new I/O request as
soon as possible. So this commit puts this new I/O request directly
into the dispatch list.
Tested-by: Jan Kara <jack@suse.cz>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Link: https://lore.kernel.org/r/20210304174627.161-3-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Suppose that I/O dispatch is plugged, to wait for new I/O for the
in-service bfq-queue, say bfqq. Suppose then that there is a further
bfq_queue woken by bfqq, and that this woken queue has pending I/O. A
woken queue does not steal bandwidth from bfqq, because it remains
soon without I/O if bfqq is not served. So there is virtually no risk
of loss of bandwidth for bfqq if this woken queue has I/O dispatched
while bfqq is waiting for new I/O. In contrast, this extra I/O
injection boosts throughput. This commit performs this extra
injection.
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Link: https://lore.kernel.org/r/20210304174627.161-2-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Sentence reconstruction for better readability.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Christoph reported that we'll likely trigger the WARN_ON_ONCE() checking
that we're not submitting a bvec with REQ_OP_ZONE_APPEND in
bio_iov_iter_get_pages() some time ago using zoned btrfs, but I couldn't
reproduce it back then.
Now Naohiro was able to trigger the bug as well with xfstests generic/095
on a zoned btrfs.
There is nothing that prevents bvec submissions via REQ_OP_ZONE_APPEND if
the hardware's zone append limit is met.
Reported-by: Naohiro Aota <naohiro.aota@wdc.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/10bd414d9326c90cd69029077db63b363854eee5.1616600835.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When a stacked block device inserts a request into another block device
using blk_insert_cloned_request, the request's nr_phys_segments field gets
recalculated by a call to blk_recalc_rq_segments in
blk_cloned_rq_check_limits. But blk_recalc_rq_segments does not know how to
handle multi-segment discards. For disk types which can handle
multi-segment discards like nvme, this results in discard requests which
claim a single segment when it should report several, triggering a warning
in nvme and causing nvme to fail the discard from the invalid state.
WARNING: CPU: 5 PID: 191 at drivers/nvme/host/core.c:700 nvme_setup_discard+0x170/0x1e0 [nvme_core]
...
nvme_setup_cmd+0x217/0x270 [nvme_core]
nvme_loop_queue_rq+0x51/0x1b0 [nvme_loop]
__blk_mq_try_issue_directly+0xe7/0x1b0
blk_mq_request_issue_directly+0x41/0x70
? blk_account_io_start+0x40/0x50
dm_mq_queue_rq+0x200/0x3e0
blk_mq_dispatch_rq_list+0x10a/0x7d0
? __sbitmap_queue_get+0x25/0x90
? elv_rb_del+0x1f/0x30
? deadline_remove_request+0x55/0xb0
? dd_dispatch_request+0x181/0x210
__blk_mq_do_dispatch_sched+0x144/0x290
? bio_attempt_discard_merge+0x134/0x1f0
__blk_mq_sched_dispatch_requests+0x129/0x180
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x47/0xe0
__blk_mq_delay_run_hw_queue+0x15b/0x170
blk_mq_sched_insert_requests+0x68/0xe0
blk_mq_flush_plug_list+0xf0/0x170
blk_finish_plug+0x36/0x50
xlog_cil_committed+0x19f/0x290 [xfs]
xlog_cil_process_committed+0x57/0x80 [xfs]
xlog_state_do_callback+0x1e0/0x2a0 [xfs]
xlog_ioend_work+0x2f/0x80 [xfs]
process_one_work+0x1b6/0x350
worker_thread+0x53/0x3e0
? process_one_work+0x350/0x350
kthread+0x11b/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
This patch fixes blk_recalc_rq_segments to be aware of devices which can
have multi-segment discards. It calculates the correct discard segment
count by counting the number of bio as each discard bio is considered its
own segment.
Fixes: 1e739730c5b9 ("block: optionally merge discontiguous discard bios into a single request")
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Link: https://lore.kernel.org/r/20210211143807.GA115624@redhat
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When zone reset ioctl and data read race for a same zone on zoned block
devices, the data read leaves stale page cache even though the zone
reset ioctl zero clears all the zone data on the device. To avoid
non-zero data read from the stale page cache after zone reset, discard
page cache of reset target zones in blkdev_zone_mgmt_ioctl(). Introduce
the helper function blkdev_truncate_zone_range() to discard the page
cache. Ensure the page cache discarded by calling the helper function
before and after zone reset in same manner as fallocate does.
This patch can be applied back to the stable kernel version v5.10.y.
Rework is needed for older stable kernels.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Cc: <stable@vger.kernel.org> # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210311072546.678999-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
register_disk() suppress uevents for devices with the GENHD_FL_HIDDEN
but enables uevents at the end again in order to announce disk after
possible partitions are created.
When the device is removed the uevents are still on and user land sees
'remove' messages for devices which were never 'add'ed to the system.
KERNEL[95481.571887] remove /devices/virtual/nvme-fabrics/ctl/nvme5/nvme0c5n1 (block)
Let's suppress the uevents for GENHD_FL_HIDDEN by not enabling the
uevents at all.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Link: https://lore.kernel.org/r/20210311151917.136091-1-dwagner@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ever since the addition of multipage bio_vecs BIO_MAX_PAGES has been
horribly confusingly misnamed. Rename it to BIO_MAX_VECS to stop
confusing users of the bio API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210311110137.1132391-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Similarly to a single zone reset operation (REQ_OP_ZONE_RESET), execute
REQ_OP_ZONE_RESET_ALL operations with REQ_SYNC set.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
