| Age | Commit message (Collapse) | Author |
|---|
|
The ftrace samples need per-architecture trampoline implementations to
save and restore argument registers around the calls to my_direct_func*
and to restore polluted registers (e.g: ra).
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Select the HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS to provide the
register_ftrace_direct[_multi] interfaces allowing users to register
the customed trampoline (direct_caller) as the mcount for one or more
target functions. And modify_ftrace_direct[_multi] are also provided
for modifying direct_caller.
There are a few cases to distinguish:
- If a direct call ops is the only one tracing a function AND the direct
called trampoline is within the reach of a 'bl' instruction
-> the ftrace patchsite jumps to the trampoline
- Else
-> the ftrace patchsite jumps to the ftrace_regs_caller trampoline points
to ftrace_list_ops so it iterates over all registered ftrace ops,
including the direct call ops and calls its call_direct_funcs handler
which stores the direct called trampoline's address in the ftrace_regs
and the ftrace_regs_caller trampoline will return to that address
instead of returning to the traced function
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In the module processing functions, the same logic can be reused by
implementing ftrace_find_callable_addr().
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
We can see the following build error if CONFIG_DYNAMIC_FTRACE_WITH_REGS
is not set on LoongArch:
arch/loongarch/kernel/ftrace_dyn.c: In function ‘ftrace_make_call’:
arch/loongarch/kernel/ftrace_dyn.c:167:23: error: implicit declaration of function ‘__get_mod’
167 | ret = __get_mod(&mod, pc);
| ^~~~~~~~~
arch/loongarch/kernel/ftrace_dyn.c:171:24: error: implicit declaration of function ‘get_plt_addr’
171 | addr = get_plt_addr(mod, addr);
| ^~~~~~~~~~~~
The reason is that the __get_mod() and get_plt_addr() may be called in
ftrace_make_{call,nop}.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add new ftrace_regs_{get,set}_*() helpers which can be used to manipulate
ftrace_regs. When CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y, these can always
be used on any ftrace_regs, and when CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
=n these can be used when regs are available.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Inspired by the commit 42d038c4fb00f ("arm64: Add support for function
error injection") and the commit ee55ff803b383 ("riscv: Add support for
function error injection"), this patch supports function error injection
for LoongArch.
Mainly implement two functions:
(1) regs_set_return_value() which is used to overwrite the return value,
(2) override_function_with_return() which is used to override the probed
function returning and jump to its caller.
Here is a simple test under CONFIG_FUNCTION_ERROR_INJECTION and
CONFIG_FAIL_FUNCTION:
# echo sys_clone > /sys/kernel/debug/fail_function/inject
# echo 100 > /sys/kernel/debug/fail_function/probability
# dmesg
bash: fork: Invalid argument
# dmesg
...
FAULT_INJECTION: forcing a failure.
name fail_function, interval 1, probability 100, space 0, times 1
...
Call Trace:
[<90000000002238f4>] show_stack+0x5c/0x180
[<90000000012e384c>] dump_stack_lvl+0x60/0x88
[<9000000000b1879c>] should_fail_ex+0x1b0/0x1f4
[<900000000032ead4>] fei_kprobe_handler+0x28/0x6c
[<9000000000230970>] kprobe_breakpoint_handler+0xf0/0x118
[<90000000012e3e60>] do_bp+0x2c4/0x358
[<9000000002241924>] exception_handlers+0x1924/0x10000
[<900000000023b7d0>] sys_clone+0x0/0x4
[<90000000012e4744>] do_syscall+0x7c/0x94
[<9000000000221e44>] handle_syscall+0xc4/0x160
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
FORTIFY_SOURCE could detect various overflows at compile and run time.
ARCH_HAS_FORTIFY_SOURCE means that the architecture can be built and run
with CONFIG_FORTIFY_SOURCE. So select it in LoongArch.
See more about this feature from commit 6974f0c4555e285 ("include/linux/
string.h: add the option of fortified string.h functions").
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
With a blatant copy of some MIPS bits we introduce the crc32 and crc32c
hw accelerated module to LoongArch.
LoongArch has provided these instructions to calculate crc32 and crc32c:
* crc.w.b.w crcc.w.b.w
* crc.w.h.w crcc.w.h.w
* crc.w.w.w crcc.w.w.w
* crc.w.d.w crcc.w.d.w
So we can make use of these instructions to improve the performance of
calculation for crc32(c) checksums.
As can be seen from the following test results, crc32(c) instructions
can improve the performance by 58%.
Software implemention Hardware acceleration
Buffer size time cost (seconds) time cost (seconds) Accel.
100 KB 0.000845 0.000534 59.1%
1 MB 0.007758 0.004836 59.4%
10 MB 0.076593 0.047682 59.4%
100 MB 0.756734 0.479126 58.5%
1000 MB 7.563841 4.778266 58.5%
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch platform is 64-bit system, which supports 8-bytes memory
accessing, but generic checksum functions use 4-byte memory access.
So add 8-bytes memory access optimization for checksum functions on
LoongArch. And the code comes from arm64 system.
When network hw checksum is disabled, iperf performance improves about
10% with this patch.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
To optimize memset()/memcpy()/memmove() and so on, we use a jump table
to dispatch cases for short data lengths; and for long data lengths, we
split the destination into head part (first 8 bytes), tail part (last 8
bytes) and middle part. The head part and tail part may be at unaligned
addresses, while the middle part is always aligned (the middle part is
allowed to overlap the head/tail part). In this way, the first and last
8 bytes may be unaligned accesses, but we can make sure the data in the
middle is processed at an aligned destination address.
We have tested micro-bench[1] on a Loongson-3C5000 16-core machine (2.2GHz):
1. memset
| length | src offset | dst offset | speed before | speed after | % |
|--------|------------|------------|--------------|-------------|---------|
| 8 | 0 | 0 | 696.191 | 1518.785 | 118.16% |
| 8 | 0 | 1 | 696.325 | 1518.937 | 118.14% |
| 50 | 0 | 0 | 969.976 | 8053.902 | 730.32% |
| 50 | 0 | 1 | 970.034 | 8058.475 | 730.74% |
| 300 | 0 | 0 | 5876.612 | 16544.703 | 181.53% |
| 300 | 0 | 1 | 5030.849 | 16549.011 | 228.95% |
| 1200 | 0 | 0 | 11797.077 | 16752.137 | 42.00% |
| 1200 | 0 | 1 | 5687.141 | 16645.233 | 192.68% |
| 4000 | 0 | 0 | 15723.27 | 16761.557 | 6.60% |
| 4000 | 0 | 1 | 5906.114 | 16732.316 | 183.30% |
| 8000 | 0 | 0 | 16751.403 | 16770.002 | 0.11% |
| 8000 | 0 | 1 | 5995.449 | 16754.07 | 179.45% |
2. memcpy
| length | src offset | dst offset | speed before | speed after | % |
|--------|------------|------------|--------------|-------------|---------|
| 8 | 0 | 0 | 696.2 | 1670.605 | 139.96% |
| 8 | 0 | 1 | 696.325 | 1671.138 | 139.99% |
| 50 | 0 | 0 | 969.974 | 8724.999 | 799.51% |
| 50 | 0 | 1 | 970.032 | 8730.138 | 799.98% |
| 300 | 0 | 0 | 5564.662 | 16272.652 | 192.43% |
| 300 | 0 | 1 | 4670.436 | 14972.842 | 220.59% |
| 1200 | 0 | 0 | 10740.23 | 16751.728 | 55.97% |
| 1200 | 0 | 1 | 5027.741 | 14874.564 | 195.85% |
| 4000 | 0 | 0 | 15122.367 | 16737.642 | 10.68% |
| 4000 | 0 | 1 | 5536.918 | 14890.397 | 168.93% |
| 8000 | 0 | 0 | 16505.453 | 16553.543 | 0.29% |
| 8000 | 0 | 1 | 5821.619 | 14841.804 | 154.94% |
3. memmove
| length | src offset | dst offset | speed before | speed after | % |
|--------|------------|------------|--------------|-------------|---------|
| 8 | 0 | 0 | 982.693 | 1670.568 | 70.00% |
| 8 | 0 | 1 | 983.023 | 1671.174 | 70.00% |
| 50 | 0 | 0 | 1230.87 | 8727.625 | 609.06% |
| 50 | 0 | 1 | 1232.515 | 8730.138 | 608.32% |
| 300 | 0 | 0 | 6490.375 | 16296.993 | 151.09% |
| 300 | 0 | 1 | 4282.687 | 14972.842 | 249.61% |
| 1200 | 0 | 0 | 11742.755 | 16752.546 | 42.66% |
| 1200 | 0 | 1 | 5039.338 | 14872.951 | 195.14% |
| 4000 | 0 | 0 | 15467.786 | 16737.09 | 8.21% |
| 4000 | 0 | 1 | 5009.905 | 14890.542 | 197.22% |
| 8000 | 0 | 0 | 16489.664 | 16553.273 | 0.39% |
| 8000 | 0 | 1 | 5823.786 | 14858.646 | 155.14% |
* speed: MB/s
* length: byte
[1] https://github.com/heiher/mem-bench
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Provide kernel_fpu_begin()/kernel_fpu_end() to allow the kernel itself
to use fpu. They can be used by some other kernel components, e.g., the
AMDGPU graphic driver for DCN.
Reported-by: WANG Xuerui <kernel@xen0n.name>
Tested-by: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
SEGV_BNDERR was introduced initially for supporting the Intel MPX, but
fell into disuse after the MPX support was removed. The LoongArch
bounds-checking instructions behave very differently than MPX, but
overall the interface is still kind of suitable for conveying the
information to userland when bounds-checking assertions trigger, so we
wouldn't have to invent more UAPI. Specifically, when the BCE triggers,
a SEGV_BNDERR is sent to userland, with si_addr set to the out-of-bounds
address or value (in asrt{gt,le}'s case), and one of si_lower or
si_upper set to the configured bound depending on the faulting
instruction. The other bound is set to either 0 or ULONG_MAX to resemble
a range with both lower and upper bounds.
Note that it is possible to have si_addr == si_lower in case of a
failing asrtgt or {ld,st}gt, because those instructions test for strict
greater-than relationship. This should not pose a problem for userland,
though, because the faulting PC is available for the application to
associate back to the exact instruction for figuring out the
expectation.
Example exception context generated by a faulting `asrtgt.d t0, t1`
(assert t0 > t1 or BCE) with t0=100 and t1=200:
> pc 00005555558206a4 ra 00007ffff2d854fc tp 00007ffff2f2f180 sp 00007ffffbf9fb80
> a0 0000000000000002 a1 00007ffffbf9fce8 a2 00007ffffbf9fd00 a3 00007ffff2ed4558
> a4 0000000000000000 a5 00007ffff2f044c8 a6 00007ffffbf9fce0 a7 fffffffffffff000
> t0 0000000000000064 t1 00000000000000c8 t2 00007ffffbfa2d5e t3 00007ffff2f12aa0
> t4 00007ffff2ed6158 t5 00007ffff2ed6158 t6 000000000000002e t7 0000000003d8f538
> t8 0000000000000005 u0 0000000000000000 s9 0000000000000000 s0 00007ffffbf9fce8
> s1 0000000000000002 s2 0000000000000000 s3 00007ffff2f2c038 s4 0000555555820610
> s5 00007ffff2ed5000 s6 0000555555827e38 s7 00007ffffbf9fd00 s8 0000555555827e38
> ra: 00007ffff2d854fc
> ERA: 00005555558206a4
> CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
> PRMD: 00000007 (PPLV3 +PIE -PWE)
> EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
> ECFG: 0007181c (LIE=2-4,11-12 VS=7)
> ESTAT: 000a0000 [BCE] (IS= ECode=10 EsubCode=0)
> PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Use ISA manual names for BADV and CPUCFG.PRID lines in show_regs(), for
stylistic consistency with the other lines already touched.
While at it, also include current CPU's full name in show_regs() output.
It may be more helpful for developers looking at the resulting dumps,
because multiple distinct CPU models may share the same PRID. Not having
this info available may hide problems only found on some but not all of
the models sharing one specific PRID.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Example output looks like:
[ xx.xxxxxx] ESTAT: 00001000 [INT] (IS=12 ECode=0 EsubCode=0)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Example output looks like:
[ xx.xxxxxx] ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Example output looks like:
[ xx.xxxxxx] EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Example output looks like:
[ xx.xxxxxx] PRMD: 00000004 (PPLV0 +PIE -PWE)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Example output looks like:
[ xx.xxxxxx] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
Some initial machinery for this pretty-printing format has been included
in this patch as well.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Use uppercase CSR names throughout for consistency with the manual
wording, and right-align the keys. The "CSR" part is inferrable from
context, hence dropped for more horizontal space.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Otherwise the addresses wouldn't make sense at all.
While at it, align the "map keys" to maintain right-alignment with the
"estat:" line too; also swap the ERA and ra lines so all CSRs are shown
together.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Show PC (CSR.ERA) in place of $zero, and also show the syscall restart
flag (conveniently stuffed in regs[0]) if non-zero.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Define them according to the ISA manual, in order to enable matching the
sub-exceptions for humanization purposes later.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
While interrupts are assigned ECodes `64 + interrupt number`, all
existing use sites of interrupt numbers want the 64 subtracted.
Re-arrange the definitions so that the actual interrupt number is used
everywhere, and make EXCCODE_INT_END inclusive as it is more intuitive
that way.
While at it, according to the asm/loongarch.h definitions, the total
number of architectural interrupts should be 14, but various other
places indicate otherwise (13 or 15). Those places have been adjusted
to 14 as well for consistency.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for stackleak feature. Also allow specifying
architecture-specific stackleak poison function to enable faster
implementation. On s390, the mvc-based implementation helps decrease
typical overhead from a factor of 3 to just 25%
- Convert all assembler files to use SYM* style macros, deprecating the
ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS
- Improve KASLR to also randomize module and special amode31 code base
load addresses
- Rework decompressor memory tracking to support memory holes and
improve error handling
- Add support for protected virtualization AP binding
- Add support for set_direct_map() calls
- Implement set_memory_rox() and noexec module_alloc()
- Remove obsolete overriding of mem*() functions for KASAN
- Rework kexec/kdump to avoid using nodat_stack to call purgatory
- Convert the rest of the s390 code to use flexible-array member
instead of a zero-length array
- Clean up uaccess inline asm
- Enable ARCH_HAS_MEMBARRIER_SYNC_CORE
- Convert to using CONFIG_FUNCTION_ALIGNMENT and enable
DEBUG_FORCE_FUNCTION_ALIGN_64B
- Resolve last_break in userspace fault reports
- Simplify one-level sysctl registration
- Clean up branch prediction handling
- Rework CPU counter facility to retrieve available counter sets just
once
- Other various small fixes and improvements all over the code
* tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits)
s390/stackleak: provide fast __stackleak_poison() implementation
stackleak: allow to specify arch specific stackleak poison function
s390: select ARCH_USE_SYM_ANNOTATIONS
s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc()
s390: wire up memfd_secret system call
s390/mm: enable ARCH_HAS_SET_DIRECT_MAP
s390/mm: use BIT macro to generate SET_MEMORY bit masks
s390/relocate_kernel: adjust indentation
s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc.
s390/entry: use SYM* macros instead of ENTRY(), etc.
s390/purgatory: use SYM* macros instead of ENTRY(), etc.
s390/kprobes: use SYM* macros instead of ENTRY(), etc.
s390/reipl: use SYM* macros instead of ENTRY(), etc.
s390/head64: use SYM* macros instead of ENTRY(), etc.
s390/earlypgm: use SYM* macros instead of ENTRY(), etc.
s390/mcount: use SYM* macros instead of ENTRY(), etc.
s390/crc32le: use SYM* macros instead of ENTRY(), etc.
s390/crc32be: use SYM* macros instead of ENTRY(), etc.
s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc.
s390/amode31: use SYM* macros instead of ENTRY(), etc.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Refactor scripts/kallsyms to make it faster and easier to maintain
- Clean up menuconfig
- Provide Clang with hard-coded target triple instead of CROSS_COMPILE
- Use -z pack-relative-relocs flags instead of --use-android-relr-tags
for arm64 CONFIG_RELR
- Add srcdeb-pkg target to build only a Debian source package
- Add KDEB_SOURCE_COMPRESS option to specify the compression for a
Debian source package
- Misc cleanups and fixes
* tag 'kbuild-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: specify targets in debian/rules as .PHONY
sparc: unify sparc32/sparc64 archhelp
kbuild: rpm-pkg: remove kernel-drm PROVIDES
kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression
kbuild: add srcdeb-pkg target
Makefile: use -z pack-relative-relocs
kbuild: clang: do not use CROSS_COMPILE for target triple
kconfig: menuconfig: reorder functions to remove forward declarations
kconfig: menuconfig: remove unused M_EVENT macro
kconfig: menuconfig: remove OLD_NCURSES macro
kbuild: builddeb: Eliminate debian/arch use
scripts/kallsyms: update the usage in the comment block
scripts/kallsyms: decrease expand_symbol() / cleanup_symbol_name() calls
scripts/kallsyms: change the output order
scripts/kallsyms: move compiler-generated symbol patterns to mksysmap
scripts/kallsyms: exclude symbols generated by itself dynamically
scripts/mksysmap: use sed with in-line comments
scripts/mksysmap: remove comments described in nm(1)
scripts/kallsyms: remove redundant code for omitting U and N
kallsyms: expand symbol name into comment for debugging
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- relocate the LoongArch kernel if the preferred address is already
occupied
- implement BTI annotations for arm64 EFI stub and zboot images
- clean up arm64 zboot Kbuild rules for injecting the kernel code size
* tag 'efi-next-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/zboot: arm64: Grab code size from ELF symbol in payload
efi/zboot: arm64: Inject kernel code size symbol into the zboot payload
efi/zboot: Set forward edge CFI compat header flag if supported
efi/zboot: Add BSS padding before compression
arm64: efi: Enable BTI codegen and add PE/COFF annotation
efi/pe: Import new BTI/IBT header flags from the spec
efi/loongarch: Reintroduce efi_relocate_kernel() to relocate kernel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Nothing looks out of the ordinary in this batch of clk driver updates.
There are a couple patches to the core clk framework, but they're all
basically cleanups or debugging aids. The driver updates and new
additions are dominated in the diffstat by Qualcomm and MediaTek
drivers. Qualcomm gained a handful of new drivers for various SoCs,
and MediaTek gained a bunch of drivers for MT8188. The MediaTek
drivers are being modernized as well, so there are updates all over
that vendor's clk drivers. There's also a couple other new clk drivers
in here, for example the Starfive JH7110 SoC support is added.
Outside of the two major SoC vendors though, we have the usual
collection of non-critical fixes and cleanups to various clk drivers.
It's good to see that we're getting more cleanups and modernization
patches. Maybe one day we'll be able to properly split clk providers
from clk consumers.
Core:
- Print an informational message before disabling unused clks
New Drivers:
- BCM63268 timer clock and reset controller
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Clk driver support for Loongson-2 SoCs
- Clock driver for Skyworks Si521xx I2C PCIe clock generators
- Initial Starfive JH7110 clk/reset support
- Global clock controller drivers for Qualcomm SM7150, IPQ9574,
MSM8917 and IPQ5332 SoCs
- GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
SoCs
Updates:
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
- Convert platform clk drivers to remove_new()
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Reimplement Loongson-1 clk driver with DT support
- Migrate socfpga clk driver to of_clk_add_hw_provider()
- Support for i3c clks on Aspeed ast2600 SoCs
- Add clock generic devm_clk_hw_register_gate_parent_data
- Add audiomix block control for i.MX8MP
- Add support for determine_rate to i.MX composite-8m
- Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
- Provide clock name in error message for clk-gpr-mux on get parent
failure
- Drop duplicate imx_clk_mux_flags macro
- Register the i.MX8MP Media Disp2 Pix clock as bus clock
- Add Media LDB root clock to i.MX8MP
- Make i.MX8MP nand_usdhc_bus clock as non-critical
- Fix the rate table for i.MX fracn-gppll
- Disable HW control for the fracn-gppll in order to be controlled by
register write
- Add support for interger PLL in fracn-gppll
- Add mcore_booted module parameter to i.MX93 provider
- Add NIC, A55 and ARM PLL clocks to i.MX93
- Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
- Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
to get more accurate clock rates
- Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
- Update some of the i.MX critical clocks flags to allow glitchless
on-the-fly rate change.
- Add I2C5 clock on Renesas R-Car V3H
- Exynos850: Add CMU_G3D clock controller for the Mali GPU
- Extract Exynos5433 (ARM64) clock controller power management code
to common driver parts
- Exynos850: make PMU_ALIVE_PCLK clock critical
- Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
V4H
- Add video capture (VIN) clocks on Renesas R-Car V3H
- Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
- Support for Stromer Plus PLL on Qualcomm IPQ5332
- Add a missing reset to Qualcomm QCM2290
- Migrate Qualcomm IPQ4019 to clk_parent_data
- Make USB GDSCs enter retention state when disabled on Qualcomm
SM6375, MSM8996 and MSM8998 SoCs
- Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
- Add two EMAC GDSCs on Qualcomm SC8280XP
- Use shared rcg clk ops in Qualcomm SM6115 GCC
- Park Qualcomm SM8350 PCIe PIPE clks when disabled
- Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
- Add missing XO clocks to Qualcomm MSM8226 and MSM8974
- Convert some Qualcomm clk DT bindings to YAML
- Reparenting fix for the clock supplying camera modules on Rockchip
rk3399
- Mark more critical (bus-)clocks on Rockchip rk3588"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
clk: rockchip: rk3588: make gate linked clocks critical
clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
clk: qcom: add the GPUCC driver for sa8775p
dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
clk: starfive: Avoid casting iomem pointers
clk: microchip: fix potential UAF in auxdev release callback
clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
clk: mediatek: fhctl: Mark local variables static
clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
clk: uniphier: Use managed `of_clk_add_hw_provider()`
clk: si5351: Use managed `of_clk_add_hw_provider()`
clk: si570: Use managed `of_clk_add_hw_provider()`
clk: si514: Use managed `of_clk_add_hw_provider()`
clk: lmk04832: Use managed `of_clk_add_hw_provider()`
...
|
|
Lukas warned that ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP had been
renamed in the mm tree & that RISC-V would need a fixup as part of the
merge. The warning was missed however, and RISC-V is selecting the
orphaned Kconfig option.
Fixes: 89d77f71f493 ("Merge tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux")
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>.
Link: https://lore.kernel.org/linux-riscv/CAKXUXMyVeg2kQK_edKHtMD3eADrDK_PKhCSVkMrLDdYgTQQ5rg@mail.gmail.com/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230429-trilogy-jolly-12bf5c53d62d@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When CONFIG_MODULES is set, __init_or_module becomes <empty>, but when
CONFIG_MODULES is not set, __init_or_module becomes __init.
In the latter case, it causes section mismatch warnings:
WARNING: modpost: vmlinux.o: section mismatch in reference: riscv_fill_cpu_mfr_info (section: .text) -> sifive_errata_patch_func (section: .init.text)
WARNING: modpost: vmlinux.o: section mismatch in reference: riscv_fill_cpu_mfr_info (section: .text) -> thead_errata_patch_func (section: .init.text)
Fixes: bb3f89487fd9 ("RISC-V: hwprobe: Remove __init on probe_vendor_features()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230429155247.12131-1-rdunlap@infradead.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
sbi_probe_extension() is specified with "Returns 0 if the given SBI
extension ID (EID) is not available, or 1 if it is available unless
defined as any other non-zero value by the implementation."
Additionally, sbiret.value is a long. Fix the implementation to
ensure any nonzero long value is considered a success, rather
than only positive int values.
Fixes: b9dcd9e41587 ("RISC-V: Add basic support for SBI v0.2")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230427163626.101042-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
create_fdt_early_page_table() explicitly uses early_pg_dir for
32-bit fdt mapping and the pgdir parameter is redundant here.
So remove it and its caller.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: ef69d2559fe9 ("riscv: Move early dtb mapping into the fixmap region")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230426100009.685435-1-suagrfillet@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Sia Jee Heng <jeeheng.sia@starfivetech.com> says:
This series adds RISC-V Hibernation/suspend to disk support.
Low level Arch functions were created to support hibernation.
swsusp_arch_suspend() relies code from __cpu_suspend_enter() to write
cpu state onto the stack, then calling swsusp_save() to save the memory
image.
Arch specific hibernation header is implemented and is utilized by the
arch_hibernation_header_restore() and arch_hibernation_header_save()
functions. The arch specific hibernation header consists of satp, hartid,
and the cpu_resume address. The kernel built version is also need to be
saved into the hibernation image header to making sure only the same
kernel is restore when resume.
swsusp_arch_resume() creates a temporary page table that covering only
the linear map. It copies the restore code to a 'safe' page, then start to
restore the memory image. Once completed, it restores the original
kernel's page table. It then calls into __hibernate_cpu_resume()
to restore the CPU context. Finally, it follows the normal hibernation
path back to the hibernation core.
To enable hibernation/suspend to disk into RISCV, the below config
need to be enabled:
- CONFIG_HIBERNATION
- CONFIG_ARCH_HIBERNATION_HEADER
- CONFIG_ARCH_HIBERNATION_POSSIBLE
At high-level, this series includes the following changes:
1) Change suspend_save_csrs() and suspend_restore_csrs()
to public function as these functions are common to
suspend/hibernation. (patch 1)
2) Refactor the common code in the __cpu_resume_enter() function and
__hibernate_cpu_resume() function. The common code are used by
hibernation and suspend. (patch 2)
3) Enhance kernel_page_present() function to support huge page. (patch 3)
4) Add arch/riscv low level functions to support
hibernation/suspend to disk. (patch 4)
* b4-shazam-merge:
RISC-V: Add arch functions to support hibernation/suspend-to-disk
RISC-V: mm: Enable huge page support to kernel_page_present() function
RISC-V: Factor out common code of __cpu_resume_enter()
RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function
Link: https://lore.kernel.org/r/20230330064321.1008373-1-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When building allmodconfig with clang and its integrated assembler and
linking with a version of GNU ld prior to 2.36, the following link error
occurs:
riscv64-linux-gnu-ld: .init.data has both ordered [`__patchable_function_entries' in init/main.o] and unordered [`.init_array.0' in kernel/trace/trace_benchmark.o] sections
riscv64-linux-gnu-ld: final link failed: bad value
This is the same error addressed by commit 45bd8951806e ("arm64: Improve
HAVE_DYNAMIC_FTRACE_WITH_REGS selection for clang") for arm64. See that
changelog for a full description of why this error occurs with this
combination of tools.
In a similar manner as that change, restrict the
CONFIG_HAVE_DYNAMIC_FTRACE selection to combinations of tools known to
work so that there are no errors.
Link: https://github.com/ClangBuiltLinux/linux/issues/1817
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230404-riscv-dynamic-ftrace-checks-clang-v1-1-0ce296b7d423@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Low level Arch functions were created to support hibernation.
swsusp_arch_suspend() relies code from __cpu_suspend_enter() to write
cpu state onto the stack, then calling swsusp_save() to save the memory
image.
Arch specific hibernation header is implemented and is utilized by the
arch_hibernation_header_restore() and arch_hibernation_header_save()
functions. The arch specific hibernation header consists of satp, hartid,
and the cpu_resume address. The kernel built version is also need to be
saved into the hibernation image header to making sure only the same
kernel is restore when resume.
swsusp_arch_resume() creates a temporary page table that covering only
the linear map. It copies the restore code to a 'safe' page, then start
to restore the memory image. Once completed, it restores the original
kernel's page table. It then calls into __hibernate_cpu_resume()
to restore the CPU context. Finally, it follows the normal hibernation
path back to the hibernation core.
To enable hibernation/suspend to disk into RISCV, the below config
need to be enabled:
- CONFIG_HIBERNATION
- CONFIG_ARCH_HIBERNATION_HEADER
- CONFIG_ARCH_HIBERNATION_POSSIBLE
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-5-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently kernel_page_present() function doesn't support huge page
detection causes the function to mistakenly return false to the
hibernation core.
Add huge page detection to the function to solve the problem.
Fixes: 9e953cda5cdf ("riscv: Introduce huge page support for 32/64bit kernel")
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-4-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The cpu_resume() function is very similar for the suspend to disk and
suspend to ram cases. Factor out the common code into suspend_restore_csrs
macro and suspend_restore_regs macro.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-3-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently suspend_save_csrs() and suspend_restore_csrs() functions are
statically defined in the suspend.c. Change the function's attribute
to public so that the functions can be used by hibernation as well.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-2-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix a PageHighMem check in dma-coherent initialization (Doug Berger)
- clean up the coherency defaul initialiation (Jiaxun Yang)
- add cacheline to user/kernel dma-debug space dump messages (Desnes
Nunes, Geert Uytterhoeve)
- swiotlb statistics improvements (Michael Kelley)
- misc cleanups (Petr Tesarik)
* tag 'dma-mapping-6.4-2023-04-28' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Omit total_used and used_hiwater if !CONFIG_DEBUG_FS
swiotlb: track and report io_tlb_used high water marks in debugfs
swiotlb: fix debugfs reporting of reserved memory pools
swiotlb: relocate PageHighMem test away from rmem_swiotlb_setup
of: address: always use dma_default_coherent for default coherency
dma-mapping: provide CONFIG_ARCH_DMA_DEFAULT_COHERENT
dma-mapping: provide a fallback dma_default_coherent
dma-debug: Use %pa to format phys_addr_t
dma-debug: add cacheline to user/kernel space dump messages
dma-debug: small dma_debug_entry's comment and variable name updates
dma-direct: cleanup parameters to dma_direct_optimal_gfp_mask
|
|
Define target specific arch_try_cmpxchg_local(). This
definition overrides the generic arch_try_cmpxchg_local()
fallback definition and enables target-specific
implementation of try_cmpxchg_local().
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230405141710.3551-5-ubizjak@gmail.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Implement target specific support for local_try_cmpxchg()
and local_cmpxchg() using typed C wrappers that call their
_local counterpart and provide additional checking of
their input arguments.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230405141710.3551-4-ubizjak@gmail.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Decrease the probability of this internal facility to be used by
driver code.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> [riscv]
Link: https://lore.kernel.org/r/20230118154450.73842-1-andrzej.hajda@intel.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for runtime detection of the Svnapot extension
- Support for Zicboz when clearing pages
- We've moved to GENERIC_ENTRY
- Support for !MMU on rv32 systems
- The linear region is now mapped via huge pages
- Support for building relocatable kernels
- Support for the hwprobe interface
- Various fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (57 commits)
RISC-V: hwprobe: Explicity check for -1 in vdso init
RISC-V: hwprobe: There can only be one first
riscv: Allow to downgrade paging mode from the command line
dt-bindings: riscv: add sv57 mmu-type
RISC-V: hwprobe: Remove __init on probe_vendor_features()
riscv: Use --emit-relocs in order to move .rela.dyn in init
riscv: Check relocations at compile time
powerpc: Move script to check relocations at compile time in scripts/
riscv: Introduce CONFIG_RELOCATABLE
riscv: Move .rela.dyn outside of init to avoid empty relocations
riscv: Prepare EFI header for relocatable kernels
riscv: Unconditionnally select KASAN_VMALLOC if KASAN
riscv: Fix ptdump when KASAN is enabled
riscv: Fix EFI stub usage of KASAN instrumented strcmp function
riscv: Move DTB_EARLY_BASE_VA to the kernel address space
riscv: Rework kasan population functions
riscv: Split early and final KASAN population functions
riscv: Use PUD/P4D/PGD pages for the linear mapping
riscv: Move the linear mapping creation in its own function
riscv: Get rid of riscv_pfn_base variable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"A couple of minor changes.
One to remove the long dead uclinux.org web address and email list
from the MAINTAINERS entry for UCLINUX.
The other to remove dead config options in the m68knommu Kconfig"
* tag 'm68knommu-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: Kconfig.machine: remove obsolete configs ROMBASE and ROMSIZE
MAINTAINERS: drop uclinux.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for building the kernel using PC-relative addressing on
Power10.
- Allow HV KVM guests on Power10 to use prefixed instructions.
- Unify support for the P2020 CPU (85xx) into a single machine
description.
- Always build the 64-bit kernel with 128-bit long double.
- Drop support for several obsolete 2000's era development boards as
identified by Paul Gortmaker.
- A series fixing VFIO on Power since some generic changes.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu,
Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel
Stanley, Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro
Yamada, Michael Neuling, Nathan Chancellor, Nathan Lynch, Nicholas
Miehlbradt, Nicholas Piggin, Nick Desaulniers, Nysal Jan K.A, Pali
Rohár, Paul Gortmaker, Paul Mackerras, Petr Vaněk, Randy Dunlap, Rob
Herring, Sachin Sant, Sean Christopherson, Segher Boessenkool, and
Timothy Pearson.
* tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits)
powerpc/64s: Disable pcrel code model on Clang
powerpc: Fix merge conflict between pcrel and copy_thread changes
powerpc/configs/powernv: Add IGB=y
powerpc/configs/64s: Drop JFS Filesystem
powerpc/configs/64s: Use EXT4 to mount EXT2 filesystems
powerpc/configs: Make pseries_defconfig an alias for ppc64le_guest
powerpc/configs: Make pseries_le an alias for ppc64le_guest
powerpc/configs: Incorporate generic kvm_guest.config into guest configs
powerpc/configs: Add IBMVETH=y and IBMVNIC=y to guest configs
powerpc/configs/64s: Enable Device Mapper options
powerpc/configs/64s: Enable PSTORE
powerpc/configs/64s: Enable VLAN support
powerpc/configs/64s: Enable BLK_DEV_NVME
powerpc/configs/64s: Drop REISERFS
powerpc/configs/64s: Use SHA512 for module signatures
powerpc/configs/64s: Enable IO_STRICT_DEVMEM
powerpc/configs/64s: Enable SCHEDSTATS
powerpc/configs/64s: Enable DEBUG_VM & other options
powerpc/configs/64s: Enable EMULATED_STATS
powerpc/configs/64s: Enable KUNIT and most tests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP cross-CPU function-call updates from Ingo Molnar:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some major
architectures it's not even consistently available.
* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
trace,smp: Trace all smp_function_call*() invocations
trace: Add trace_ipi_send_cpu()
sched, smp: Trace smp callback causing an IPI
smp: reword smp call IPI comment
treewide: Trace IPIs sent via smp_send_reschedule()
irq_work: Trace self-IPIs sent via arch_irq_work_raise()
smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
sched, smp: Trace IPIs sent via send_call_function_single_ipi()
trace: Add trace_ipi_send_cpumask()
kernel/smp: Make csdlock_debug= resettable
locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
locking/csd_lock: Remove added data from CSD lock debugging
locking/csd_lock: Add Kconfig option for csd_debug default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
- Add Intel Granite Rapids support
- Add uncore events for Intel SPR IMC PMU
- Fix perf IRQ throttling bug
* tag 'perf-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add events for Intel SPR IMC PMU
perf/core: Fix hardlockup failure caused by perf throttle
perf/x86/cstate: Add Granite Rapids support
perf/x86/msr: Add Granite Rapids
perf/x86/intel: Add Granite Rapids
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 LAM (Linear Address Masking) support from Dave Hansen:
"Add support for the new Linear Address Masking CPU feature.
This is similar to ARM's Top Byte Ignore and allows userspace to store
metadata in some bits of pointers without masking it out before use"
* tag 'x86_mm_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/iommu/sva: Do not allow to set FORCE_TAGGED_SVA bit from outside
x86/mm/iommu/sva: Fix error code for LAM enabling failure due to SVA
selftests/x86/lam: Add test cases for LAM vs thread creation
selftests/x86/lam: Add ARCH_FORCE_TAGGED_SVA test cases for linear-address masking
selftests/x86/lam: Add inherit test cases for linear-address masking
selftests/x86/lam: Add io_uring test cases for linear-address masking
selftests/x86/lam: Add mmap and SYSCALL test cases for linear-address masking
selftests/x86/lam: Add malloc and tag-bits test cases for linear-address masking
x86/mm/iommu/sva: Make LAM and SVA mutually exclusive
iommu/sva: Replace pasid_valid() helper with mm_valid_pasid()
mm: Expose untagging mask in /proc/$PID/status
x86/mm: Provide arch_prctl() interface for LAM
x86/mm: Reduce untagged_addr() overhead for systems without LAM
x86/uaccess: Provide untagged_addr() and remove tags before address check
mm: Introduce untagged_addr_remote()
x86/mm: Handle LAM on context switch
x86: CPUID and CR3/CR4 flags for Linear Address Masking
x86: Allow atomic MM_CONTEXT flags setting
x86/mm: Rework address range check in get_user() and put_user()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 tdx update from Dave Hansen:
"The original tdx hypercall assembly code took two flags in %RSI to
tweak its behavior at runtime. PeterZ recently axed one flag in commit
e80a48bade61 ("x86/tdx: Remove TDX_HCALL_ISSUE_STI").
Kill the other flag too and tweak the 'output' mode with an assembly
macro instead. This results in elimination of one push/pop pair and
overall easier to read assembly.
- Do conditional __tdx_hypercall() 'output' processing via an
assembly macro argument rather than a runtime register"
* tag 'x86_tdx_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Drop flags from __tdx_hypercall()
|
