summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25Merge tag 'riscv-for-linus-5.8-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into master Pull RISC-V fixes from Palmer Dabbelt: "A few more fixes this week: - A fix to avoid using SBI calls during kasan initialization, as the SBI calls themselves have not been probed yet. - Three fixes related to systems with multiple memory regions" * tag 'riscv-for-linus-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Parse all memory blocks to remove unusable memory RISC-V: Do not rely on initrd_start/end computed during early dt parsing RISC-V: Set maximum number of mapped pages correctly riscv: kasan: use local_tlb_flush_all() to avoid uninitialized __sbi_rfence
2020-07-25Merge tag 'x86-urgent-2020-07-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull x86 fixes from Ingo Molnar: "Misc fixes: - Fix a section end page alignment assumption that was causing crashes - Fix ORC unwinding on freshly forked tasks which haven't executed yet and which have empty user task stacks - Fix the debug.exception-trace=1 sysctl dumping of user stacks, which was broken by recent maccess changes" * tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/dumpstack: Dump user space code correctly again x86/stacktrace: Fix reliable check for empty user task stacks x86/unwind/orc: Fix ORC for newly forked tasks x86, vmlinux.lds: Page-align end of ..page_aligned sections
2020-07-25Merge tag 'efi-urgent-2020-07-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull EFI fixes from Ingo Molnar: "Various EFI fixes: - Fix the layering violation in the use of the EFI runtime services availability mask in users of the 'efivars' abstraction - Revert build fix for GCC v4.8 which is no longer supported - Clean up some x86 EFI stub details, some of which are borderline bugs that copy around garbage into padding fields - let's fix these out of caution. - Fix build issues while working on RISC-V support - Avoid --whole-archive when linking the stub on arm64" * tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Revert "efi/x86: Fix build with gcc 4" efi/efivars: Expose RT service availability via efivars abstraction efi/libstub: Move the function prototypes to header file efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds efi/libstub/arm64: link stub lib.a conditionally efi/x86: Only copy upto the end of setup_header efi/x86: Remove unused variables
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net into masterLinus Torvalds
Pull networking fixes from David Miller: 1) Fix RCU locaking in iwlwifi, from Johannes Berg. 2) mt76 can access uninitialized NAPI struct, from Felix Fietkau. 3) Fix race in updating pause settings in bnxt_en, from Vasundhara Volam. 4) Propagate error return properly during unbind failures in ax88172a, from George Kennedy. 5) Fix memleak in adf7242_probe, from Liu Jian. 6) smc_drv_probe() can leak, from Wang Hai. 7) Don't muck with the carrier state if register_netdevice() fails in the bonding driver, from Taehee Yoo. 8) Fix memleak in dpaa_eth_probe, from Liu Jian. 9) Need to check skb_put_padto() return value in hsr_fill_tag(), from Murali Karicheri. 10) Don't lose ionic RSS hash settings across FW update, from Shannon Nelson. 11) Fix clobbered SKB control block in act_ct, from Wen Xu. 12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang. 13) IS_UDPLITE cleanup a long time ago, incorrectly handled transformations involving UDPLITE_RECV_CC. From Miaohe Lin. 14) Unbalanced locking in netdevsim, from Taehee Yoo. 15) Suppress false-positive error messages in qed driver, from Alexander Lobakin. 16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye. 17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost. 18) Uninitialized value in geneve_changelink(), from Cong Wang. 19) Fix deadlock in xen-netfront, from Andera Righi. 19) flush_backlog() frees skbs with IRQs disabled, so should use dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov Kasiviswanathan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) drivers/net/wan: lapb: Corrected the usage of skb_cow dev: Defer free of skbs in flush_backlog qrtr: orphan socket in qrtr_release() xen-netfront: fix potential deadlock in xennet_remove() flow_offload: Move rhashtable inclusion to the source file geneve: fix an uninitialized value in geneve_changelink() bonding: check return value of register_netdevice() in bond_newlink() tcp: allow at most one TLP probe per flight AX.25: Prevent integer overflows in connect and sendmsg cxgb4: add missing release on skb in uld_send() net: atlantic: fix PTP on AQC10X AX.25: Prevent out-of-bounds read in ax25_sendmsg() sctp: shrink stream outq when fails to do addstream reconf sctp: shrink stream outq only when new outcnt < old outcnt AX.25: Fix out-of-bounds read in ax25_connect() enetc: Remove the mdio bus on PF probe bailout net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload net: ethernet: ave: Fix error returns in ave_init drivers/net/wan/x25_asy: Fix to make it work ipvs: fix the connection sync failed in some cases ...
2020-07-24riscv: Parse all memory blocks to remove unusable memoryAtish Patra
Currently, maximum physical memory allowed is equal to -PAGE_OFFSET. That's why we remove any memory blocks spanning beyond that size. However, it is done only for memblock containing linux kernel which will not work if there are multiple memblocks. Process all memory blocks to figure out how much memory needs to be removed and remove at the end instead of updating the memblock list in place. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-07-24RISC-V: Do not rely on initrd_start/end computed during early dt parsingAtish Patra
Currently, initrd_start/end are computed during early_init_dt_scan but used during arch_setup. We will get the following panic if initrd is used and CONFIG_DEBUG_VIRTUAL is turned on. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] kernel BUG at arch/riscv/mm/physaddr.c:33! [ 0.000000] Kernel BUG [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-rc4-00015-ged0b226fed02 #886 [ 0.000000] epc: ffffffe0002058d2 ra : ffffffe0000053f0 sp : ffffffe001001f40 [ 0.000000] gp : ffffffe00106e250 tp : ffffffe001009d40 t0 : ffffffe00107ee28 [ 0.000000] t1 : 0000000000000000 t2 : ffffffe000a2e880 s0 : ffffffe001001f50 [ 0.000000] s1 : ffffffe0001383e8 a0 : ffffffe00c087e00 a1 : 0000000080200000 [ 0.000000] a2 : 00000000010bf000 a3 : ffffffe00106f3c8 a4 : ffffffe0010bf000 [ 0.000000] a5 : ffffffe000000000 a6 : 0000000000000006 a7 : 0000000000000001 [ 0.000000] s2 : ffffffe00106f068 s3 : ffffffe00106f070 s4 : 0000000080200000 [ 0.000000] s5 : 0000000082200000 s6 : 0000000000000000 s7 : 0000000000000000 [ 0.000000] s8 : 0000000080011010 s9 : 0000000080012700 s10: 0000000000000000 [ 0.000000] s11: 0000000000000000 t3 : 000000000001fe30 t4 : 000000000001fe30 [ 0.000000] t5 : 0000000000000000 t6 : ffffffe00107c471 [ 0.000000] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x22/0x46 with crng_init=0 To avoid the error, initrd_start/end can be computed from phys_initrd_start/size in setup itself. It also improves the initrd placement by aligning the start and size with the page size. Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code") Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-07-24RISC-V: Set maximum number of mapped pages correctlyAtish Patra
Currently, maximum number of mapper pages are set to the pfn calculated from the memblock size of the memblock containing kernel. This will work until that memblock spans the entire memory. However, it will be set to a wrong value if there are multiple memblocks defined in kernel (e.g. with efi runtime services). Set the the maximum value to the pfn calculated from dram size. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-07-24Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into master Pull xtensa csum regression fix from Al Viro: "Max Filippov caught a breakage introduced in xtensa this cycle by the csum_and_copy_..._user() series. Cut'n'paste from the wrong source - the check that belongs in csum_and_copy_to_user() ended up both there and in csum_and_copy_from_user()" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: xtensa: fix access check in csum_and_copy_from_user
2020-07-24Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux into master Pull arm64 fix from Will Deacon: "Fix compat vDSO build flags for recent versions of clang to tell it where to find the assembler" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: vdso32: Fix '--prefix=' value for newer versions of clang
2020-07-23Merge tag 's390-5.8-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux into master Pull s390 fixes from Heiko Carstens: - Change cpum_cf/perf counter name from DFLT_CCERROR to DFLT_CCFINISH to reflect reality and avoid further confusion. This is a user space visible change therefore the commit has also a stable tag for 5.7, where this counter was introduced. - Add Matthew Rosato as s390 IOMMU maintainer. * tag 's390-5.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: MAINTAINERS: add Matthew for s390 IOMMU s390/cpum_cf,perf: change DFLT_CCERROR counter name
2020-07-23arm64: vdso32: Fix '--prefix=' value for newer versions of clangNathan Chancellor
Newer versions of clang only look for $(COMPAT_GCC_TOOLCHAIN_DIR)as [1], rather than $(COMPAT_GCC_TOOLCHAIN_DIR)$(CROSS_COMPILE_COMPAT)as, resulting in the following build error: $ make -skj"$(nproc)" ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- \ CROSS_COMPILE_COMPAT=arm-linux-gnueabi- LLVM=1 O=out/aarch64 distclean \ defconfig arch/arm64/kernel/vdso32/ ... /home/nathan/cbl/toolchains/llvm-binutils/bin/as: unrecognized option '-EL' clang-12: error: assembler command failed with exit code 1 (use -v to see invocation) make[3]: *** [arch/arm64/kernel/vdso32/Makefile:181: arch/arm64/kernel/vdso32/note.o] Error 1 ... Adding the value of CROSS_COMPILE_COMPAT (adding notdir to account for a full path for CROSS_COMPILE_COMPAT) fixes this issue, which matches the solution done for the main Makefile [2]. [1]: https://github.com/llvm/llvm-project/commit/3452a0d8c17f7166f479706b293caf6ac76ffd90 [2]: https://lore.kernel.org/lkml/20200721173125.1273884-1-maskray@google.com/ Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Cc: stable@vger.kernel.org Link: https://github.com/ClangBuiltLinux/linux/issues/1099 Link: https://lore.kernel.org/r/20200723041509.400450-1-natechancellor@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-22x86/dumpstack: Dump user space code correctly againThomas Gleixner
H.J. reported that post 5.7 a segfault of a user space task does not longer dump the Code bytes when /proc/sys/debug/exception-trace is enabled. It prints 'Code: Bad RIP value.' instead. This was broken by a recent change which made probe_kernel_read() reject non-kernel addresses. Update show_opcodes() so it retrieves user space opcodes via copy_from_user_nmi(). Fixes: 98a23609b103 ("maccess: always use strict semantics for probe_kernel_read") Reported-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/87h7tz306w.fsf@nanos.tec.linutronix.de
2020-07-22x86/stacktrace: Fix reliable check for empty user task stacksJosh Poimboeuf
If a user task's stack is empty, or if it only has user regs, ORC reports it as a reliable empty stack. But arch_stack_walk_reliable() incorrectly treats it as unreliable. That happens because the only success path for user tasks is inside the loop, which only iterates on non-empty stacks. Generally, a user task must end in a user regs frame, but an empty stack is an exception to that rule. Thanks to commit 71c95825289f ("x86/unwind/orc: Fix error handling in __unwind_start()"), unwind_start() now sets state->error appropriately. So now for both ORC and FP unwinders, unwind_done() and !unwind_error() always means the end of the stack was successfully reached. So the success path for kthreads is no longer needed -- it can also be used for empty user tasks. Reported-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lkml.kernel.org/r/f136a4e5f019219cbc4f4da33b30c2f44fa65b84.1594994374.git.jpoimboe@redhat.com
2020-07-22x86/unwind/orc: Fix ORC for newly forked tasksJosh Poimboeuf
The ORC unwinder fails to unwind newly forked tasks which haven't yet run on the CPU. It correctly reads the 'ret_from_fork' instruction pointer from the stack, but it incorrectly interprets that value as a call stack address rather than a "signal" one, so the address gets incorrectly decremented in the call to orc_find(), resulting in bad ORC data. Fix it by forcing 'ret_from_fork' frames to be signal frames. Reported-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lkml.kernel.org/r/f91a8778dde8aae7f71884b5df2b16d552040441.1594994374.git.jpoimboe@redhat.com
2020-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-07-21 The following pull-request contains BPF updates for your *net-next* tree. We've added 46 non-merge commits during the last 6 day(s) which contain a total of 68 files changed, 4929 insertions(+), 526 deletions(-). The main changes are: 1) Run BPF program on socket lookup, from Jakub. 2) Introduce cpumap, from Lorenzo. 3) s390 JIT fixes, from Ilya. 4) teach riscv JIT to emit compressed insns, from Luke. 5) use build time computed BTF ids in bpf iter, from Yonghong. ==================== Purely independent overlapping changes in both filter.h and xdp.h Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22Merge tag 'media/v5.8-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into master Pull media fixes from Mauro Carvalho Chehab: "A series of fixes for the upcoming atomisp driver. They solve issues when probing atomisp on devices with multiple cameras and get rid of warnings when built with W=1. The diffstat is a bit long, as this driver has several abstractions. The patches that solved the issues with W=1 had to get rid of some duplicated code (there used to have 2 versions of the same code, one for ISP2401 and another one for ISP2400). As this driver is not in 5.7, such changes won't cause regressions" * tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (38 commits) Revert "media: atomisp: keep the ISP powered on when setting it" media: atomisp: fix mask and shift operation on ISPSSPM0 media: atomisp: move system_local consts into a C file media: atomisp: get rid of version-specific system_local.h media: atomisp: move global stuff into a common header media: atomisp: remove non-used 32-bits consts at system_local media: atomisp: get rid of some unused static vars media: atomisp: Fix error code in ov5693_probe() media: atomisp: Replace trace_printk by pr_info media: atomisp: Fix __func__ style warnings media: atomisp: fix help message for ISP2401 selection media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue. media: atomisp: make const arrays static, makes object smaller media: atomisp: Clean up non-existing folders from Makefile media: atomisp: Get rid of ACPI specifics in gmin_subdev_add() media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add() media: atomisp: Use temporary variable for device in gmin_subdev_add() media: atomisp: Refactor PMIC detection to a separate function media: atomisp: Deduplicate return ret in gmin_i2c_write() media: atomisp: Make pointer to PMIC client global ...
2020-07-22x86, vmlinux.lds: Page-align end of ..page_aligned sectionsJoerg Roedel
On x86-32 the idt_table with 256 entries needs only 2048 bytes. It is page-aligned, but the end of the .bss..page_aligned section is not guaranteed to be page-aligned. As a result, objects from other .bss sections may end up on the same 4k page as the idt_table, and will accidentially get mapped read-only during boot, causing unexpected page-faults when the kernel writes to them. This could be worked around by making the objects in the page aligned sections page sized, but that's wrong. Explicit sections which store only page aligned objects have an implicit guarantee that the object is alone in the page in which it is placed. That works for all objects except the last one. That's inconsistent. Enforcing page sized objects for these sections would wreckage memory sanitizers, because the object becomes artificially larger than it should be and out of bound access becomes legit. Align the end of the .bss..page_aligned and .data..page_aligned section on page-size so all objects places in these sections are guaranteed to have their own page. [ tglx: Amended changelog ] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200721093448.10417-1-joro@8bytes.org
2020-07-21xtensa: fix access check in csum_and_copy_from_userMax Filippov
Commit d341659f470b ("xtensa: switch to providing csum_and_copy_from_user()") introduced access check, but incorrectly tested dst instead of src. Fix access_ok argument in csum_and_copy_from_user. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: d341659f470b ("xtensa: switch to providing csum_and_copy_from_user()") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-07-21bpf, riscv: Use compressed instructions in the rv64 JITLuke Nelson
This patch uses the RVC support and encodings from bpf_jit.h to optimize the rv64 jit. The optimizations work by replacing emit(rv_X(...)) with a call to a helper function emit_X, which will emit a compressed version of the instruction when possible, and when RVC is enabled. The JIT continues to pass all tests in lib/test_bpf.c, and introduces no new failures to test_verifier; both with and without RVC being enabled. Most changes are straightforward replacements of emit(rv_X(...), ctx) with emit_X(..., ctx), with the following exceptions bearing mention; * Change emit_imm to sign-extend the value in "lower", since the checks for RVC (and the instructions themselves) treat the value as signed. Otherwise, small negative immediates will not be recognized as encodable using an RVC instruction. For example, without this change, emit_imm(rd, -1, ctx) would cause lower to become 4095, which is not a 6b int even though a "c.li rd, -1" instruction suffices. * For {BPF_MOV,BPF_ADD} BPF_X, drop using addiw,addw in the 32-bit cases since the values are zero-extended into the upper 32 bits in the following instructions anyways, and the addition commutes with zero-extension. (BPF_SUB BPF_X must still use subw since subtraction does not commute with zero-extension.) This patch avoids optimizing branches and jumps to use RVC instructions since surrounding code often makes assumptions about the sizes of emitted instructions. Optimizing these will require changing these functions (e.g., emit_branch) to dynamically compute jump offsets. The following are examples of the JITed code for the verifier selftest "direct packet read test#3 for CGROUP_SKB OK", without and with RVC enabled, respectively. The former uses 178 bytes, and the latter uses 112, for a ~37% reduction in code size for this example. Without RVC: 0: 02000813 addi a6,zero,32 4: fd010113 addi sp,sp,-48 8: 02813423 sd s0,40(sp) c: 02913023 sd s1,32(sp) 10: 01213c23 sd s2,24(sp) 14: 01313823 sd s3,16(sp) 18: 01413423 sd s4,8(sp) 1c: 03010413 addi s0,sp,48 20: 03056683 lwu a3,48(a0) 24: 02069693 slli a3,a3,0x20 28: 0206d693 srli a3,a3,0x20 2c: 03456703 lwu a4,52(a0) 30: 02071713 slli a4,a4,0x20 34: 02075713 srli a4,a4,0x20 38: 03856483 lwu s1,56(a0) 3c: 02049493 slli s1,s1,0x20 40: 0204d493 srli s1,s1,0x20 44: 03c56903 lwu s2,60(a0) 48: 02091913 slli s2,s2,0x20 4c: 02095913 srli s2,s2,0x20 50: 04056983 lwu s3,64(a0) 54: 02099993 slli s3,s3,0x20 58: 0209d993 srli s3,s3,0x20 5c: 09056a03 lwu s4,144(a0) 60: 020a1a13 slli s4,s4,0x20 64: 020a5a13 srli s4,s4,0x20 68: 00900313 addi t1,zero,9 6c: 006a7463 bgeu s4,t1,0x74 70: 00000a13 addi s4,zero,0 74: 02d52823 sw a3,48(a0) 78: 02e52a23 sw a4,52(a0) 7c: 02952c23 sw s1,56(a0) 80: 03252e23 sw s2,60(a0) 84: 05352023 sw s3,64(a0) 88: 00000793 addi a5,zero,0 8c: 02813403 ld s0,40(sp) 90: 02013483 ld s1,32(sp) 94: 01813903 ld s2,24(sp) 98: 01013983 ld s3,16(sp) 9c: 00813a03 ld s4,8(sp) a0: 03010113 addi sp,sp,48 a4: 00078513 addi a0,a5,0 a8: 00008067 jalr zero,0(ra) With RVC: 0: 02000813 addi a6,zero,32 4: 7179 c.addi16sp sp,-48 6: f422 c.sdsp s0,40(sp) 8: f026 c.sdsp s1,32(sp) a: ec4a c.sdsp s2,24(sp) c: e84e c.sdsp s3,16(sp) e: e452 c.sdsp s4,8(sp) 10: 1800 c.addi4spn s0,sp,48 12: 03056683 lwu a3,48(a0) 16: 1682 c.slli a3,0x20 18: 9281 c.srli a3,0x20 1a: 03456703 lwu a4,52(a0) 1e: 1702 c.slli a4,0x20 20: 9301 c.srli a4,0x20 22: 03856483 lwu s1,56(a0) 26: 1482 c.slli s1,0x20 28: 9081 c.srli s1,0x20 2a: 03c56903 lwu s2,60(a0) 2e: 1902 c.slli s2,0x20 30: 02095913 srli s2,s2,0x20 34: 04056983 lwu s3,64(a0) 38: 1982 c.slli s3,0x20 3a: 0209d993 srli s3,s3,0x20 3e: 09056a03 lwu s4,144(a0) 42: 1a02 c.slli s4,0x20 44: 020a5a13 srli s4,s4,0x20 48: 4325 c.li t1,9 4a: 006a7363 bgeu s4,t1,0x50 4e: 4a01 c.li s4,0 50: d914 c.sw a3,48(a0) 52: d958 c.sw a4,52(a0) 54: dd04 c.sw s1,56(a0) 56: 03252e23 sw s2,60(a0) 5a: 05352023 sw s3,64(a0) 5e: 4781 c.li a5,0 60: 7422 c.ldsp s0,40(sp) 62: 7482 c.ldsp s1,32(sp) 64: 6962 c.ldsp s2,24(sp) 66: 69c2 c.ldsp s3,16(sp) 68: 6a22 c.ldsp s4,8(sp) 6a: 6145 c.addi16sp sp,48 6c: 853e c.mv a0,a5 6e: 8082 c.jr ra Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Björn Töpel <bjorn.topel@gmail.com> Link: https://lore.kernel.org/bpf/20200721025241.8077-4-luke.r.nels@gmail.com
2020-07-21bpf, riscv: Add encodings for compressed instructionsLuke Nelson
This patch adds functions for encoding and emitting compressed riscv (RVC) instructions to the BPF JIT. Some regular riscv instructions can be compressed into an RVC instruction if the instruction fields meet some requirements. For example, "add rd, rs1, rs2" can be compressed into "c.add rd, rs2" when rd == rs1. To make using RVC encodings simpler, this patch also adds helper functions that selectively emit either a regular instruction or a compressed instruction if possible. For example, emit_add will produce a "c.add" if possible and regular "add" otherwise. Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200721025241.8077-3-luke.r.nels@gmail.com
2020-07-21bpf, riscv: Modify JIT ctx to support compressed instructionsLuke Nelson
This patch makes the necessary changes to struct rv_jit_context and to bpf_int_jit_compile to support compressed riscv (RVC) instructions in the BPF JIT. It changes the JIT image to be u16 instead of u32, since RVC instructions are 2 bytes as opposed to 4. It also changes ctx->offset and ctx->ninsns to refer to 2-byte instructions rather than 4-byte ones. The riscv PC is required to be 16-bit aligned with or without RVC, so this is sufficient to refer to any valid riscv offset. The code for computing jump offsets in bytes is updated accordingly, and factored into a new "ninsns_rvoff" function to simplify the code. Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200721025241.8077-2-luke.r.nels@gmail.com
2020-07-21s390/bpf: Use bpf_skip() in bpf_jit_prologue()Ilya Leoshkevich
Now that we have bpf_skip() for emitting nops, use it in bpf_jit_prologue() in order to reduce code duplication. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200717165326.6786-6-iii@linux.ibm.com
2020-07-21s390/bpf: Tolerate not converging code shrinkingIlya Leoshkevich
"BPF_MAXINSNS: Maximum possible literals" unnecessarily falls back to the interpreter because of failing sanity check in bpf_set_addr. The problem is that there are a lot of branches that can be shrunk, and doing so opens up the possibility to shrink even more. This process does not converge after 3 passes, causing code offsets to change during the codegen pass, which must never happen. Fix by inserting nops during codegen pass in order to preserve code offets. Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200717165326.6786-5-iii@linux.ibm.com
2020-07-21s390/bpf: Use brcl for jumping to exit_ip if necessaryIlya Leoshkevich
"BPF_MAXINSNS: Maximum possible literals" test causes panic with bpf_jit_harden = 2. The reason is that BPF_JMP | BPF_EXIT is always emitted as brc, however, after removal of JITed image size limitations, brcl might be required. Fix by using brcl when necessary. Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200717165326.6786-4-iii@linux.ibm.com
2020-07-21s390/bpf: Fix sign extension in branch_kuIlya Leoshkevich
Both signed and unsigned variants of BPF_JMP | BPF_K require sign-extending the immediate. JIT emits cgfi for the signed case, which is correct, and clgfi for the unsigned case, which is not correct: clgfi zero-extends the immediate. s390 does not provide an instruction that does sign-extension and unsigned comparison at the same time. Therefore, fix by first loading the sign-extended immediate into work register REG_1 and proceeding as if it's BPF_X. Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches") Reported-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Seth Forshee <seth.forshee@canonical.com> Link: https://lore.kernel.org/bpf/20200717165326.6786-3-iii@linux.ibm.com
2020-07-21s390/cpum_cf,perf: change DFLT_CCERROR counter nameThomas Richter
Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15. This counter counts completed DEFLATE instructions with exit code 0, 1 or 2. Since exit code 0 means success and exit code 1 or 2 indicate errors, change the counter name to avoid confusion. This counter is incremented each time the DEFLATE instruction completed regardless if an error was detected or not. Fixes: d68d5d51dc89 ("s390/cpum_cf: Add new extended counters for IBM z15") Fixes: e7950166e402 ("perf vendor events s390: Add new deflate counters for IBM z15") Cc: stable@vger.kernel.org # v5.7 Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20riscv: kasan: use local_tlb_flush_all() to avoid uninitialized __sbi_rfenceVincent Chen
It fails to boot the v5.8-rc4 kernel with CONFIG_KASAN because kasan_init and kasan_early_init use uninitialized __sbi_rfence as executing the tlb_flush_all(). Actually, at this moment, only the CPU which is responsible for the system initialization enables the MMU. Other CPUs are parking at the .Lsecondary_start. Hence the tlb_flush_all() is able to be replaced by local_tlb_flush_all() to avoid using uninitialized __sbi_rfence. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-07-20arch, net: remove the last csum_partial_copy() leftoversChristoph Hellwig
Most of the tree only uses and implements csum_partial_copy_nocheck, but the c6x and lib/checksum.c implement a csum_partial_copy that isn't used anywere except to define csum_partial_copy. Get rid of this pointless alias. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: remove compat_sys_{get,set}sockoptChristoph Hellwig
Now that the ->compat_{get,set}sockopt proto_ops methods are gone there is no good reason left to keep the compat syscalls separate. This fixes the odd use of unsigned int for the compat_setsockopt optlen and the missing sock_use_custom_sol_socket. It would also easily allow running the eBPF hooks for the compat syscalls, but such a large change in behavior does not belong into a consolidation patch like this one. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19arm64: dts: clearfog-gt-8k: fix switch link configurationRussell King
The commit below caused a regression for clearfog-gt-8k, where the link between the switch and the host does not come up. Investigation revealed two issues: - MV88E6xxx DSA no longer allows an in-band link to come up as the link is programmed to be forced down. Commit "net: dsa: mv88e6xxx: fix in-band AN link establishment" addresses this. - The dts configured dissimilar link modes at each end of the host to switch link; the host was configured using a fixed link (so has no in-band status) and the switch was configured to expect in-band status. With both issues fixed, the regression is resolved. Fixes: 34b5e6a33c1a ("net: dsa: mv88e6xxx: Configure MAC when using fixed link") Reported-by: Martin Rowe <martin.p.rowe@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19copy_xstate_to_kernel: Fix typo which caused GDB regressionKevin Buettner
This fixes a regression encountered while running the gdb.base/corefile.exp test in GDB's test suite. In my testing, the typo prevented the sw_reserved field of struct fxregs_state from being output to the kernel XSAVES area. Thus the correct mask corresponding to XCR0 was not present in the core file for GDB to interrogate, resulting in the following behavior: [kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/corefile/corefile testsuite/outputs/gdb.base/corefile/corefile.core Reading symbols from testsuite/outputs/gdb.base/corefile/corefile... [New LWP 232880] warning: Unexpected size of section `.reg-xstate/232880' in core file. With the typo fixed, the test works again as expected. Signed-off-by: Kevin Buettner <kevinb@redhat.com> Fixes: 9e4636545933 ("copy_xstate_to_kernel(): don't leave parts of destination uninitialized") Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-19Merge tag 'x86-urgent-2020-07-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull x86 fixes from Thomas Gleixner: "A pile of fixes for x86: - Fix the I/O bitmap invalidation on XEN PV, which was overlooked in the recent ioperm/iopl rework. This caused the TSS and XEN's I/O bitmap to get out of sync. - Use the proper vectors for HYPERV. - Make disabling of stack protector for the entry code work with GCC builds which enable stack protector by default. Removing the option is not sufficient, it needs an explicit -fno-stack-protector to shut it off. - Mark check_user_regs() noinstr as it is called from noinstr code. The missing annotation causes it to be placed in the text section which makes it instrumentable. - Add the missing interrupt disable in exc_alignment_check() - Fixup a XEN_PV build dependency in the 32bit entry code - A few fixes to make the Clang integrated assembler happy - Move EFI stub build to the right place for out of tree builds - Make prepare_exit_to_usermode() static. It's not longer called from ASM code" * tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Don't add the EFI stub to targets x86/entry: Actually disable stack protector x86/ioperm: Fix io bitmap invalidation on Xen PV x86: math-emu: Fix up 'cmp' insn for clang ias x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV x86/entry: Add compatibility with IAS x86/entry/common: Make prepare_exit_to_usermode() static x86/entry: Mark check_user_regs() noinstr x86/traps: Disable interrupts in exc_aligment_check() x86/entry/32: Fix XEN_PV build dependency
2020-07-19Merge tag 'irq-urgent-2020-07-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull irq fixes from Thomas Gleixner: "Two fixes for the interrupt subsystem: - Make the handling of the firmware node consistent and do not free the node after the domain has been created successfully. The core code stores a pointer to it which can lead to a use after free or double free. This used to "work" because the pointer was not stored when the initial code was written, but at some point later it was required to store it. Of course nobody noticed that the existing users break that way. - Handle affinity setting on inactive interrupts correctly when hierarchical irq domains are enabled. When interrupts are inactive with the modern hierarchical irqdomain design, the interrupt chips are not necessarily in a state where affinity changes can be handled. The legacy irq chip design allowed this because interrupts are immediately fully initialized at allocation time. X86 has a hacky workaround for this, but other implementations do not. This cased malfunction on GIC-V3. Instead of playing whack a mole to find all affected drivers, change the core code to store the requested affinity setting and then establish it when the interrupt is allocated, which makes the X86 hack go away" * tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/affinity: Handle affinity setting on inactive interrupts correctly irqdomain/treewide: Keep firmware node unconditionally allocated
2020-07-19x86/boot: Don't add the EFI stub to targetsArvind Sankar
vmlinux-objs-y is added to targets, which currently means that the EFI stub gets added to the targets as well. It shouldn't be added since it is built elsewhere. This confuses Makefile.build which interprets the EFI stub as a target $(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a and will create drivers/firmware/efi/libstub/ underneath arch/x86/boot/compressed, to hold this supposed target, if building out-of-tree. [0] Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y. [0] See scripts/Makefile.build near the end: # Create directories for object files if they do not exist Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lkml.kernel.org/r/20200715032631.1562882-1-nivedita@alum.mit.edu
2020-07-19x86/entry: Actually disable stack protectorKees Cook
Some builds of GCC enable stack protector by default. Simply removing the arguments is not sufficient to disable stack protector, as the stack protector for those GCC builds must be explicitly disabled. Remove the argument removals and add -fno-stack-protector. Additionally include missed x32 argument updates, and adjust whitespace for readability. Fixes: 20355e5f73a7 ("x86/entry: Exclude low level entry code from sanitizing") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/202006261333.585319CA6B@keescook
2020-07-18Merge tag 'riscv-for-linus-5.8-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into master Pull RISC-V fixes from Palmer Dabbelt: "Two fixes: - 16KiB kernel stacks on rv64, which fixes a lot of crashes. - Rolling an mmiowb() into the scheduler, which when combined with Will's fix to the mmiowb()-on-spinlock should fix the PREEMPT issues we've been seeing" * tag 'riscv-for-linus-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Upgrade smp_mb__after_spinlock() to iorw,iorw riscv: use 16KB kernel stack on 64-bit
2020-07-18Merge tag 'powerpc-5.8-7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into master Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.8: - A fix to the VAS code we merged this cycle, to report the proper error code to userspace for address translation failures. And a selftest update to match. - Another fix for our pkey handling of PROT_EXEC mappings. - A fix for a crash when booting a "secure VM" under an ultravisor with certain numbers of CPUs. Thanks to: Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan Das, Satheesh Rajendran, Thiago Jung Bauermann" * tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Use proper error code to check fault address powerpc/vas: Report proper error code for address translation failure powerpc/pseries/svm: Fix incorrect check for shared_lppaca_size powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkey
2020-07-18x86/ioperm: Fix io bitmap invalidation on Xen PVAndy Lutomirski
tss_invalidate_io_bitmap() wasn't wired up properly through the pvop machinery, so the TSS and Xen's io bitmap would get out of sync whenever disabling a valid io bitmap. Add a new pvop for tss_invalidate_io_bitmap() to fix it. This is XSA-329. Fixes: 22fe5b0439dd ("x86/ioperm: Move TSS bitmap update to exit to user work") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/d53075590e1f91c19f8af705059d3ff99424c020.1595030016.git.luto@kernel.org
2020-07-18media: atomisp: move CCK endpoint address to generic headerAndy Shevchenko
IOSF MBI header contains a lot of definitions, such as end point addresses of IPs. Move CCK address from AtomISP driver to generic header. While here, drop unused one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-17Merge tag 'arm-fixes-5.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master Pull ARM SoC fixes from Arnd Bergmann: "This time there are a number of actual code fixes, plus a small set of device tree issues getting addressed: Renesas: - one defconfig cleanup to allow a later Kconfig change Intel socfpga: - enable QSPI devices on some machines - fix DTC validation warnings TI OMAP: - Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module driver - A regression fix for ti-sysc no-idle handling that caused issues compared to earlier platform data based booting - A fix for memory leak for omap_hwmod_allocate_module - Fix d_can driver probe for am437x NXP i.MX: - A couple of fixes on i.MX platform device registration code to stop the use of invalid IRQ 0. - Fix a regression seen on ls1021a platform, caused by commit 52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx"). - Fix a misconfiguration of audio SSI on imx6qdl-gw551x board. Amlogic Meson: - misc DT fixes - SoC ID fixes to detect all chips correctly" * tag 'arm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema arm64: dts: stratix10: increase QSPI reg address in nand dts file arm64: dts: stratix10: add status to qspi dts node arm64: dts: agilex: add status to qspi dts node ARM: dts: Fix dcan driver probe failed on am437x platform ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST soc: imx: check ls1021a ARM: imx: Remove imx_add_imx_dma() unused irq_err argument ARM: imx: Provide correct number of resources when registering gpio devices ARM: dts: imx6qdl-gw551x: fix audio SSI bus: ti-sysc: Do not disable on suspend for no-idle bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk bus: ti-sysc: Fix wakeirq sleeping function called from invalid context ARM: dts: meson: Align L2 cache-controller nodename with dtschema arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency arm64: dts: meson: add missing gxl rng clock soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's
2020-07-17Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux into master Pull arm64 fixes from Will Deacon: "A batch of arm64 fixes. Although the diffstat is a bit larger than we'd usually have at this stage, a decent amount of it is the addition of comments describing our syscall tracing behaviour, and also a sweep across all the modular arm64 PMU drivers to make them rebust against unloading and unbinding. There are a couple of minor things kicking around at the moment (CPU errata and module PLTs for very large modules), but I'm not expecting any significant changes now for us in 5.8. - Fix kernel text addresses for relocatable images booting using EFI and with KASLR disabled so that they match the vmlinux ELF binary. - Fix unloading and unbinding of PMU driver modules. - Fix generic mmiowb() when writeX() is called from preemptible context (reported by the riscv folks). - Fix ptrace hardware single-step interactions with signal handlers, system calls and reverse debugging. - Fix reporting of 64-bit x0 register for 32-bit tasks via 'perf_regs'. - Add comments describing syscall entry/exit tracing ABI" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: drivers/perf: Prevent forced unbinding of PMU drivers asm-generic/mmiowb: Allow mmiowb_set_pending() when preemptible() arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP arm64: ptrace: Use NO_SYSCALL instead of -1 in syscall_trace_enter() arm64: syscall: Expand the comment about ptrace and syscall(-1) arm64: ptrace: Add a comment describing our syscall entry/exit trap ABI arm64: compat: Ensure upper 32 bits of x0 are zero on syscall return arm64: ptrace: Override SPSR.SS when single-stepping is enabled arm64: ptrace: Consistently use pseudo-singlestep exceptions drivers/perf: Fix kernel panic when rmmod PMU modules during perf sampling efi/libstub/arm64: Retain 2MB kernel Image alignment if !KASLR
2020-07-17genirq/affinity: Handle affinity setting on inactive interrupts correctlyThomas Gleixner
Setting interrupt affinity on inactive interrupts is inconsistent when hierarchical irq domains are enabled. The core code should just store the affinity and not call into the irq chip driver for inactive interrupts because the chip drivers may not be in a state to handle such requests. X86 has a hacky workaround for that but all other irq chips have not which causes problems e.g. on GIC V3 ITS. Instead of adding more ugly hacks all over the place, solve the problem in the core code. If the affinity is set on an inactive interrupt then: - Store it in the irq descriptors affinity mask - Update the effective affinity to reflect that so user space has a consistent view - Don't call into the irq chip driver This is the core equivalent of the X86 workaround and works correctly because the affinity setting is established in the irq chip when the interrupt is activated later on. Note, that this is only effective when hierarchical irq domains are enabled by the architecture. Doing it unconditionally would break legacy irq chip implementations. For hierarchial irq domains this works correctly as none of the drivers can have a dependency on affinity setting in inactive state by design. Remove the X86 workaround as it is not longer required. Fixes: 02edee152d6e ("x86/apic/vector: Ignore set_affinity call for inactive interrupts") Reported-by: Ali Saidi <alisaidi@amazon.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ali Saidi <alisaidi@amazon.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de
2020-07-17RISC-V: Upgrade smp_mb__after_spinlock() to iorw,iorwPalmer Dabbelt
While digging through the recent mmiowb preemption issue it came up that we aren't actually preventing IO from crossing a scheduling boundary. While it's a bit ugly to overload smp_mb__after_spinlock() with this behavior, it's what PowerPC is doing so there's some precedent. Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-07-17Merge tag 'socfpga_fixes_for_v5.8_v2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes arm/arm64: dts: socfpga: fixes for v5.8 - Add status = "okay" in QSPI - Increase QSPI size in reg property - Fix dtschema for SoCFPGA platforms * tag 'socfpga_fixes_for_v5.8_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema arm64: dts: stratix10: increase QSPI reg address in nand dts file arm64: dts: stratix10: add status to qspi dts node arm64: dts: agilex: add status to qspi dts node Link: https://lore.kernel.org/r/20200717155758.18233-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17Merge tag 'renesas-fixes-for-v5.8-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.8 - Replace CONFIG_PCIE_RCAR by CONFIG_PCIE_RCAR_HOST in the defconfig, to unblock a planned Kconfig change. * tag 'renesas-fixes-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST Link: https://lore.kernel.org/r/20200717100523.15418-1-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'omap-for-v5.8/fixes-rc5-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.8-rc cycle Few fixes for issues noticed during testing: - Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module driver - A regression fix for ti-sysc no-idle handling that caused issues compared to earlier platform data based booting - A fix for memory leak for omap_hwmod_allocate_module - Fix d_can driver probe for am437x * tag 'omap-for-v5.8/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix dcan driver probe failed on am437x platform ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module bus: ti-sysc: Do not disable on suspend for no-idle bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk bus: ti-sysc: Fix wakeirq sleeping function called from invalid context Link: https://lore.kernel.org/r/pull-1594840100-132735@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'imx-fixes-5.8-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.8, round 2: - A couple of fixes on i.MX platform device registration code to stop the use of invalid IRQ 0. - Fix a regression seen on ls1021a platform, caused by commit 52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx"). - Fix a misconfiguration of audio SSI on imx6qdl-gw551x board. * tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: check ls1021a ARM: imx: Remove imx_add_imx_dma() unused irq_err argument ARM: imx: Provide correct number of resources when registering gpio devices ARM: dts: imx6qdl-gw551x: fix audio SSI Link: https://lore.kernel.org/r/20200714145649.GP15718@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'amlogic-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes Amlogic fixes for v5.8-rc - misc DT fixes, and SoC ID fixes * tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: Align L2 cache-controller nodename with dtschema arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency arm64: dts: meson: add missing gxl rng clock soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's Link: https://lore.kernel.org/r/7hk0zc1ujc.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16x86: math-emu: Fix up 'cmp' insn for clang iasArnd Bergmann
The clang integrated assembler requires the 'cmp' instruction to have a length prefix here: arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl') cmp $0xffffffff,-24(%ebp) ^ Make this a 32-bit comparison, which it was clearly meant to be. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.de
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-13 19:04:47 +0000