| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
"Fix a case where objtool would mistakenly warn about instructions
being unreachable"
* tag 'objtool_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Merge annotate_reachable() into _BUG_FLAGS() asm
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"Prevent softlockups when tearing down large SGX enclaves"
* tag 'x86_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Silence softlockup detection when releasing large enclaves
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
"Maintainers and reviewers changes:
- Add Alexander Gordeev as maintainer for s390.
- Christian Borntraeger will focus on s390 KVM maintainership and
stays as s390 reviewer.
Fixes:
- Fix clang build of modules loader KUnit test.
- Fix kernel panic in CIO code on FCES path-event when no driver is
attached to a device or the driver does not provide the path_event
function"
* tag 's390-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: verify the driver availability for path_event call
s390/module: fix building test_modules_helpers.o with clang
MAINTAINERS: downgrade myself to Reviewer for s390
MAINTAINERS: add Alexander Gordeev as maintainer for s390
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- Two small cleanups
- Another fix for addressing the EFI framebuffer above 4GB when running
as Xen dom0
- A patch to let Xen guests use reserved bits in MSI- and IO-APIC-
registers for extended APIC-IDs the same way KVM guests are doing it
already
* tag 'for-linus-5.17a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pci: Make use of the helper macro LIST_HEAD()
xen/x2apic: Fix inconsistent indenting
xen/x86: detect support for extended destination ID
xen/x86: obtain full video frame buffer address for Dom0 also under EFI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a fairly large set of bugfixes, most of which had been sent a
while ago but only now made it into the soc tree:
Maintainer file updates:
- Claudiu Beznea now co-maintains the at91 soc family, replacing
Ludovic Desroches.
- Michael Walle maintains the sl28cpld drivers
- Alain Volmat and Raphael Gallais-Pou take over some drivers for ST
platforms
- Alim Akhtar is an additional reviewer for Samsung platforms
Code fixes:
- Op-tee had a problem with object lifetime that needs a slightly
complex fix, as well as another bug with error handling.
- Several minor issues for the OMAP platform, including a regression
with the timer
- A Kconfig change to fix a build-time issue on Intel SoCFPGA
Device tree fixes:
- The Amlogic Meson platform fixes a boot regression on am1-odroid, a
spurious interrupt, and a problem with reserved memory regions
- In the i.MX platform, several bug fixes are needed to make devices
work correctly: SD card detection, alarmtimer, and sound card on
some board. One patch for the GPU got in there by accident and gets
reverted again.
- TI K3 needs a fix for J721S2 serial port numbers
- ux500 needs a fix to mount the SD card as root on the Skomer phone"
* tag 'soc-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (46 commits)
Revert "arm64: dts: imx8mn-venice-gw7902: disable gpu"
arm64: Remove ARCH_VULCAN
MAINTAINERS: add myself as a maintainer for the sl28cpld
MAINTAINERS: add IRC to ARM sub-architectures and Devicetree
MAINTAINERS: arm: samsung: add Git tree and IRC
ARM: dts: Fix boot regression on Skomer
ARM: dts: spear320: Drop unused and undocumented 'irq-over-gpio' property
soc: aspeed: lpc-ctrl: Block error printing on probe defer cases
docs/ABI: testing: aspeed-uart-routing: Escape asterisk
MAINTAINERS: update drm/stm drm/sti and cec/sti maintainers
MAINTAINERS: Update Benjamin Gaignard maintainer status
ARM: socfpga: fix missing RESET_CONTROLLER
arm64: dts: meson-sm1-odroid: fix boot loop after reboot
arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610
arm64: dts: meson-g12: add ATF BL32 reserved-memory region
arm64: dts: meson-gx: add ATF BL32 reserved-memory region
arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2
arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator
arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'
optee: use driver internal tee_context for some rpc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid undefined behavior when stack backtracing, which
manifests in GCC as incorrect stack addresses
- A few fixes for the XIP kernels
- A fix to tracking NUMA state on CPU hotplug
- Support for the recently relesaed binutils-2.38, which changed the
default ISA version to one without CSRs or fence.i in 'I' extension
* tag 'riscv-for-linus-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix build with binutils 2.38
riscv: cpu-hotplug: clear cpu from numa map when teardown
riscv: extable: fix err reg writing in dedicated uaccess handler
riscv/mm: Add XIP_FIXUP for riscv_pfn_base
riscv/mm: Add XIP_FIXUP for phys_ram_base
riscv: Fix XIP_FIXUP_FLASH_OFFSET
riscv: eliminate unreliable __builtin_frame_address(1)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Enable Cortex-A510 erratum 2051678 by default as we do with other
errata.
- arm64 IORT: Check the node revision for PMCG resources to cope with
old firmware based on a broken revision of the spec that had no way
to describe the second register page (when an implementation is using
the recommended RELOC_CTRS feature).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Check node revision for PMCG resources
arm64: Enable Cortex-A510 erratum 2051678 by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert two commits that turned out to be problematic and fix two
issues related to wakeup from suspend-to-idle on x86.
Specifics:
- Revert a recent change that attempted to avoid issues with
conflicting address ranges during PCI initialization, because it
turned out to introduce a regression (Hans de Goede).
- Revert a change that limited EC GPE wakeups from suspend-to-idle to
systems based on Intel hardware, because it turned out that systems
based on hardware from other vendors depended on that functionality
too (Mario Limonciello).
- Fix two issues related to the handling of wakeup interrupts and
wakeup events signaled through the EC GPE during suspend-to-idle on
x86 (Rafael Wysocki)"
* tag 'acpi-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/PCI: revert "Ignore E820 reservations for bridge windows on newer systems"
PM: s2idle: ACPI: Fix wakeup interrupts handling
ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE
ACPI: PM: Revert "Only mark EC GPE for wakeup on Intel systems"
|
|
Merge a revert of a problematic commit for 5.17-rc4.
* acpi-x86:
x86/PCI: revert "Ignore E820 reservations for bridge windows on newer systems"
|
|
Vijay reported that the "unclobbered_vdso_oversubscribed" selftest
triggers the softlockup detector.
Actual SGX systems have 128GB of enclave memory or more. The
"unclobbered_vdso_oversubscribed" selftest creates one enclave which
consumes all of the enclave memory on the system. Tearing down such a
large enclave takes around a minute, most of it in the loop where
the EREMOVE instruction is applied to each individual 4k enclave page.
Spending one minute in a loop triggers the softlockup detector.
Add a cond_resched() to give other tasks a chance to run and placate
the softlockup detector.
Cc: stable@vger.kernel.org
Fixes: 1728ab54b4be ("x86/sgx: Add a page reclaimer")
Reported-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org> (kselftest as sanity check)
Link: https://lkml.kernel.org/r/ced01cac1e75f900251b0a4ae1150aa8ebd295ec.1644345232.git.reinette.chatre@intel.com
|
|
From version 2.38, binutils default to ISA spec version 20191213. This
means that the csr read/write (csrr*/csrw*) instructions and fence.i
instruction has separated from the `I` extension, become two standalone
extensions: Zicsr and Zifencei. As the kernel uses those instruction,
this causes the following build failure:
CC arch/riscv/kernel/vdso/vgettimeofday.o
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h: Assembler messages:
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
The fix is to specify those extensions explicitely in -march. However as
older binutils version do not support this, we first need to detect
that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
There is numa_add_cpu() when cpus online, accordingly, there should be
numa_remove_cpu() when cpus offline.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Fixes: 4f0e8eef772e ("riscv: Add numa support for riscv64 platform")
Cc: stable@vger.kernel.org
[Palmer: Add missing NUMA include]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Device tree fix for Ingenic CI20"
* tag 'mips-fixes-5.17_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: DTS: CI20: fix how ddc power is enabled
|
|
Eliminate the follow smatch warning:
arch/x86/xen/enlighten_hvm.c:189 xen_cpu_dead_hvm() warn: inconsistent
indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220207103506.102008-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Xen allows the usage of some previously reserved bits in the IO-APIC
RTE and the MSI address fields in order to store high bits for the
target APIC ID. Such feature is already implemented by QEMU/KVM and
HyperV, so in order to enable it just add the handler that checks for
it's presence.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220120152527.7524-3-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The initial change would not work when Xen was booted from EFI: There is
an early exit from the case block in that case. Move the necessary code
ahead of that.
Fixes: 335e4dd67b48 ("xen/x86: obtain upper 32 bits of video frame buffer address for Dom0")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/2501ce9d-40e5-b49d-b0e5-435544d17d4a@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This reverts commit 0c566618e27f17b5807086dba8c222ca8ca3dc1e,
this one was meant for v5.18, not as a bugfix, though the
patch itself was correct.
Reported-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Commit 7f7b4236f204 ("x86/PCI: Ignore E820 reservations for bridge windows
on newer systems") fixes the touchpad not working on laptops like
the Lenovo IdeaPad 3 15IIL05 and the Lenovo IdeaPad 5 14IIL05, as well as
fixing thunderbolt hotplug issues on the Lenovo Yoga C940.
Unfortunately it turns out that this is causing issues with suspend/resume
on Lenovo ThinkPad X1 Carbon Gen 2 laptops. So, per the no regressions
policy, rever this. Note I'm looking into another fix for the issues this
fixed.
Fixes: 7f7b4236f204 ("x86/PCI: Ignore E820 reservations for bridge windows on newer systems")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2029207
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull s390 kvm fix from Christian Borntraeger:
"Add missing check for the MEMOP ioctl
The SIDA MEMOPs must only be used for secure guests, otherwise
userspace can do unwanted memory accesses"
* tag 'kvm-s390-kernel-access' from emailed bundle:
KVM: s390: Return error on SIDA memop on normal guest
|
|
Originally we proposed a new hdmi-5v-supply regulator reference
for CI20 device tree but that was superseded by a better idea to use
the already defined "ddc-en-gpios" property of the "hdmi-connector".
Since "MIPS: DTS: CI20: Add DT nodes for HDMI setup" has already
been applied to v5.17-rc1, we add this on top.
Fixes: ae1b8d2c2de9 ("MIPS: DTS: CI20: Add DT nodes for HDMI setup")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Mayuresh reported commit 20802d8d477d ("riscv: extable: add a dedicated
uaccess handler") breaks the writev02 test case in LTP. This is due to
the err reg isn't correctly set with the errno(-EFAULT in writev02
case). First of all, the err and zero regs are reg numbers rather than
reg offsets in struct pt_regs; Secondly, regs_set_gpr() should write
the regs when offset isn't zero(zero means epc)
Fix it by correcting regs_set_gpr() logic and passing the correct reg
offset to it.
Reported-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Fixes: 20802d8d477d ("riscv: extable: add a dedicated uaccess handler")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Commit a314520d82317650 ("arm64: disable Broadcom Vulcan platform")
did not remove the ARCH_VULCAN configuration symbol, as there were still
references to this symbol.
As of commits 240d3d5b2a7a3263 ("gpio: xlp: update GPIO_XLP dependency") and
f85a543e5373eeba ("arm64: defconfig: drop ARCH_VULCAN"), the last users
of ARCH_VULCAN have been removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9e8fef2cf4f2d5648e87076bc96601cff945ce40.1641996361.git.geert+renesas@glider.be'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes
Amlogic fixes for v5.17-rc
- meson6/meson8/meson8b UART compatible fixup to notably fix earlycon
* tag 'amlogic-fixes-v5.17-rc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: meson8b: Fix the UART device-tree schema validation
ARM: dts: meson8: Fix the UART device-tree schema validation
ARM: dts: meson: Fix the UART compatible strings
Link: https://lore.kernel.org/r/746a7f25-1c96-9d27-3a08-e86b2af608ef@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
SoCFPGA fix for v5.17, part 1
- Fix a build error for socfpga_defconfig
* tag 'socfpga_fix_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: fix missing RESET_CONTROLLER
Link: https://lore.kernel.org/r/20220207101002.7566-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The signal routing on the Skomer board was incorrect making
it impossible to mount root from the SD card. Fix this up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Cc: Stefan Hansson <newbyte@disroot.org>
Link: https://lore.kernel.org/r/20220205235312.446730-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/fixes
Device Tree fixes for TI K3 platform for v5.17 merge window
* Update J721S2 platform to switch serial aliases to ttyS2.
* tag 'ti-k3-dt-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: dts: ti: k3-j721s2-common-proc-board: Alias console uart to serial2
arm64: dts: ti: k3-j721s2: Move aliases to board dts
Link: https://lore.kernel.org/r/20220204130716.fjlm4vvcbtzcwlwx@chalice
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The property 'irq-over-gpio' is both unused and undocumented. It also
happens to collide with standard *-gpio properties. As it is not needed,
drop it.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220204004117.1232902-1-robh@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.17:
- Fix sound card model for MBa8Mx board.
- Drop i.MX8MQ LCDIF port node unit-address to fix DTC warning.
- Add missing SD card detect line for imx6qdl-udoo board.
- Remove MX23_PAD_SSP1_DETECT from imx23-evk hog group. It fixes the
broken SD ard support on the board.
- A couple of fixes from Martin Kepplinger to fix the MIPI_CSI port
number on i.MX8MQ.
- Re-enable ftm_alarm0 device on ls1028a-kontron-sl28 board which was
disabled accidentally.
- Fix 'assigned-clocks-parents' typo in i.MX7ULP watchdog device node.
- Disable GPU device on imx8mn-venice-gw7902 board, as it uses
MIMX8MN5CVTI SoC which does not integrate a GPU.
* tag 'imx-fixes-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq: fix lcdif port node
arm64: dts: imx8mq-librem5: fix mipi_csi1 port number to sensor
arm64: dts: imx8mq: fix mipi_csi bidirectional port numbers
ARM: dts: imx7ulp: Fix 'assigned-clocks-parents' typo
arm64: dts: ls1028a: sl28: re-enable ftm_alarm0
arm64: dts: freescale: Fix sound card model for MBa8Mx
ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group
ARM: dts: imx6qdl-udoo: Properly describe the SD card detect
arm64: dts: imx8mn-venice-gw7902: disable gpu
Link: https://lore.kernel.org/r/20220129073150.GZ4686@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes
* 'v5.17/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: meson-sm1-odroid: fix boot loop after reboot
arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610
arm64: dts: meson-g12: add ATF BL32 reserved-memory region
arm64: dts: meson-gx: add ATF BL32 reserved-memory region
arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2
arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator
arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'
Link: https://lore.kernel.org/r/67888f6a-f4ff-9569-131a-0c7baba6ddaf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
A series of fixes for omap variants for minor issues, and a fix for a timer
regression for some omap3 beagleboard versions.
The timer fix needs to patch both the dts and the timer code because
otherwise the timer quirk handling for old dtbs will prevent the dts fix
from working.
The other changes are for issues found by automated analysis, a macasp
typo fix, and two cosmetic fixes for clocks.
* tag 'omap-for-v5.17/fixes-for-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Don't use legacy clock defines for dra7 clkctrl
clk: ti: Move dra7 clock devices out of the legacy section
ARM: dts: Fix timer regression for beagleboard revision c
ARM: dts: am335x-wega: Fix typo in mcasp property rx-num-evt
ARM: OMAP2+: adjust the location of put_device() call in omapdss_init_of
ARM: OMAP2+: hwmod: Add of_node_put() before break
Link: https://lore.kernel.org/r/pull-1641801310-149268@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The SocFPGA machine since commit b3ca9888f35f ("reset: socfpga: add an
early reset driver for SoCFPGA") uses reset controller, so it should
select RESET_CONTROLLER explicitly. Selecting ARCH_HAS_RESET_CONTROLLER
is not enough because it affects only default choice still allowing a
non-buildable configuration:
/usr/bin/arm-linux-gnueabi-ld: arch/arm/mach-socfpga/socfpga.o: in function `socfpga_init_irq':
arch/arm/mach-socfpga/socfpga.c:56: undefined reference to `socfpga_reset_init'
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org>
Fixes: b3ca9888f35f ("reset: socfpga: add an early reset driver for SoCFPGA")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Move test_modules_return_* prototypes into a header file in order to
placate -Wmissing-prototypes.
Fixes: 90c5318795ee ("s390/module: test loading modules with a lot of relocations")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
* tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix crash with stop filters in single-range mode
perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures
selftests/perf_events: Test modification of perf_event_attr::sig_data
perf: Copy perf_event_attr::sig_data on modification
x86/perf: Default set FREEZE_ON_SMI for all
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- documentation fixes related to Xen
- enable x2apic mode when available when running as hardware
virtualized guest under Xen
- cleanup and fix a corner case of vcpu enumeration when running a
paravirtualized Xen guest
* tag 'for-linus-5.17a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/Xen: streamline (and fix) PV CPU enumeration
xen: update missing ioctl magic numers documentation
Improve docs for IOCTL_GNTDEV_MAP_GRANT_REF
xen: xenbus_dev.h: delete incorrect file name
xen/x2apic: enable x2apic mode when supported for HVM
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- A couple of fixes when handling an exception while a SError has
been delivered
- Workaround for Cortex-A510's single-step erratum
RISC-V:
- Make CY, TM, and IR counters accessible in VU mode
- Fix SBI implementation version
x86:
- Report deprecation of x87 features in supported CPUID
- Preparation for fixing an interrupt delivery race on AMD hardware
- Sparse fix
All except POWER and s390:
- Rework guest entry code to correctly mark noinstr areas and fix
vtime' accounting (for x86, this was already mostly correct but not
entirely; for ARM, MIPS and RISC-V it wasn't)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Use ERR_PTR_USR() to return -EFAULT as a __user pointer
KVM: x86: Report deprecated x87 features in supported CPUID
KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata
KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs
KVM: arm64: Avoid consuming a stale esr value when SError occur
RISC-V: KVM: Fix SBI implementation version
RISC-V: KVM: make CY, TM, and IR counters accessible in VU mode
kvm/riscv: rework guest entry logic
kvm/arm64: rework guest entry logic
kvm/x86: rework guest entry logic
kvm/mips: rework guest entry logic
kvm: add guest_state_{enter,exit}_irqoff()
KVM: x86: Move delivery of non-APICv interrupt into vendor code
kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.17, take #2
- A couple of fixes when handling an exception while a SError has been
delivered
- Workaround for Cortex-A510's single-step[ erratum
|
|
This manifests as a crash early in boot on VexRiscv.
Signed-off-by: Myrtle Shah <gatecat@ds0.me>
[Palmer: split commit]
Fixes: 44c922572952 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This manifests as a crash early in boot on VexRiscv.
Signed-off-by: Myrtle Shah <gatecat@ds0.me>
[Palmer: split commit]
Fixes: 6d7f91d914bc ("riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
"For this week, we have:
- A fix to make more frequent use of hwgenerator randomness, from
Dominik.
- More cleanups to the boot initialization sequence, from Dominik.
- A fix for an old shortcoming with the ZAP ioctl, from me.
- A workaround for a still unfixed Clang CFI/FullLTO compiler bug,
from me. On one hand, it's a bummer to commit workarounds for
experimental compiler features that have bugs. But on the other, I
think this actually improves the code somewhat, independent of the
bug. So a win-win"
* tag 'random-5.17-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: only call crng_finalize_init() for primary_crng
random: access primary_pool directly rather than through pointer
random: wake up /dev/random writers after zap
random: continually use hwgenerator randomness
lib/crypto: blake2s: avoid indirect calls to compression function for Clang CFI
|
|
There were several problems with the calculation. Not only was an 'and'
being computed into t1 but thrown away; but the 'and' itself would
cause problems if the granularity of the XIP physical address was less
than XIP_OFFSET - in my case I had the kernel image at 2MB in SPI flash.
Fixes: f9ace4ede49b ("riscv: remove .text section size limitation for XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Myrtle Shah <gatecat@ds0.me>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
blake2s_compress_generic is weakly aliased by blake2s_compress. The
current harness for function selection uses a function pointer, which is
ordinarily inlined and resolved at compile time. But when Clang's CFI is
enabled, CFI still triggers when making an indirect call via a weak
symbol. This seems like a bug in Clang's CFI, as though it's bucketing
weak symbols and strong symbols differently. It also only seems to
trigger when "full LTO" mode is used, rather than "thin LTO".
[ 0.000000][ T0] Kernel panic - not syncing: CFI failure (target: blake2s_compress_generic+0x0/0x1444)
[ 0.000000][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-mainline-06981-g076c855b846e #1
[ 0.000000][ T0] Hardware name: MT6873 (DT)
[ 0.000000][ T0] Call trace:
[ 0.000000][ T0] dump_backtrace+0xfc/0x1dc
[ 0.000000][ T0] dump_stack_lvl+0xa8/0x11c
[ 0.000000][ T0] panic+0x194/0x464
[ 0.000000][ T0] __cfi_check_fail+0x54/0x58
[ 0.000000][ T0] __cfi_slowpath_diag+0x354/0x4b0
[ 0.000000][ T0] blake2s_update+0x14c/0x178
[ 0.000000][ T0] _extract_entropy+0xf4/0x29c
[ 0.000000][ T0] crng_initialize_primary+0x24/0x94
[ 0.000000][ T0] rand_initialize+0x2c/0x6c
[ 0.000000][ T0] start_kernel+0x2f8/0x65c
[ 0.000000][ T0] __primary_switched+0xc4/0x7be4
[ 0.000000][ T0] Rebooting in 5 seconds..
Nonetheless, the function pointer method isn't so terrific anyway, so
this patch replaces it with a simple boolean, which also gets inlined
away. This successfully works around the Clang bug.
In general, I'm not too keen on all of the indirection involved here; it
clearly does more harm than good. Hopefully the whole thing can get
cleaned up down the road when lib/crypto is overhauled more
comprehensively. But for now, we go with a simple bandaid.
Fixes: 6048fdcc5f26 ("lib/crypto: blake2s: include as built-in")
Link: https://github.com/ClangBuiltLinux/linux/issues/1567
Reported-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
I tried different pieces of code which uses __builtin_frame_address(1)
(with both gcc version 7.5.0 and 10.3.0) to verify whether it works as
expected on riscv64. The result is negative.
What the compiler had generated is as below:
31 fp = (unsigned long)__builtin_frame_address(1);
0xffffffff80006024 <+200>: ld s1,0(s0)
It takes '0(s0)' as the address of frame 1 (caller), but the actual address
should be '-16(s0)'.
| ... | <-+
+-----------------+ |
| return address | |
| previous fp | |
| saved registers | |
| local variables | |
$fp --> | ... | |
+-----------------+ |
| return address | |
| previous fp --------+
| saved registers |
$sp --> | local variables |
+-----------------+
This leads the kernel can not dump the full stack trace on riscv.
[ 7.222126][ T1] Call Trace:
[ 7.222804][ T1] [<ffffffff80006058>] dump_backtrace+0x2c/0x3a
This problem is not exposed on most riscv builds just because the '0(s0)'
occasionally is the address frame 2 (caller's caller), if only ra and fp
are stored in frame 1 (caller).
| ... | <-+
+-----------------+ |
| return address | |
$fp --> | previous fp | |
+-----------------+ |
| return address | |
| previous fp --------+
| saved registers |
$sp --> | local variables |
+-----------------+
This could be a *bug* of gcc that should be fixed. But as noted in gcc
manual "Calling this function with a nonzero argument can have
unpredictable effects, including crashing the calling program.", let's
remove the '__builtin_frame_address(1)' in backtrace code.
With this fix now it can show full stack trace:
[ 10.444838][ T1] Call Trace:
[ 10.446199][ T1] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[ 10.447711][ T1] [<ffffffff800060ac>] show_stack+0x32/0x3e
[ 10.448710][ T1] [<ffffffff80a005c0>] dump_stack_lvl+0x58/0x7a
[ 10.449941][ T1] [<ffffffff80a005f6>] dump_stack+0x14/0x1c
[ 10.450929][ T1] [<ffffffff804c04ee>] ubsan_epilogue+0x10/0x5a
[ 10.451869][ T1] [<ffffffff804c092e>] __ubsan_handle_load_invalid_value+0x6c/0x78
[ 10.453049][ T1] [<ffffffff8018f834>] __pagevec_release+0x62/0x64
[ 10.455476][ T1] [<ffffffff80190830>] truncate_inode_pages_range+0x132/0x5be
[ 10.456798][ T1] [<ffffffff80190ce0>] truncate_inode_pages+0x24/0x30
[ 10.457853][ T1] [<ffffffff8045bb04>] kill_bdev+0x32/0x3c
...
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Fixes: eac2f3059e02 ("riscv: stacktrace: fix the riscv stacktrace when CONFIG_FRAME_POINTER enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Use ERR_PTR_USR() when returning -EFAULT from kvm_get_attr_addr(), sparse
complains about implicitly casting the kernel pointer from ERR_PTR() into
a __user pointer.
>> arch/x86/kvm/x86.c:4342:31: sparse: sparse: incorrect type in return expression
(different address spaces) @@ expected void [noderef] __user * @@ got void * @@
arch/x86/kvm/x86.c:4342:31: sparse: expected void [noderef] __user *
arch/x86/kvm/x86.c:4342:31: sparse: got void *
>> arch/x86/kvm/x86.c:4342:31: sparse: sparse: incorrect type in return expression
(different address spaces) @@ expected void [noderef] __user * @@ got void * @@
arch/x86/kvm/x86.c:4342:31: sparse: expected void [noderef] __user *
arch/x86/kvm/x86.c:4342:31: sparse: got void *
No functional change intended.
Fixes: 56f289a8d23a ("KVM: x86: Add a helper to retrieve userspace address from kvm_device_attr")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220202005157.2545816-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since the correct gpio pin is used for enabling tf-io regulator the
system did not boot correctly after calling reboot.
[ 36.862443] reboot: Restarting system
bl31 reboot reason: 0xd
bl31 reboot reason: 0x0
system cmd 1.
SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:0;READ:0;0.0;CHK:0;
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id:
SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:400;USB:8;LOOP:1;...
Setting the gpio to open drain solves the issue.
Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")
Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: reduced serial log & removed invalid character in commit message]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220128193150.GA1304381@odroid-VirtualBox
|
|
The BL32/TEE reserved-memory region is now inherited from the common
family dtsi (meson-g12-common) so we can drop it from board files.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220126044954.19069-4-christianshewitt@gmail.com
|
|
Add an additional reserved memory region for the BL32 trusted firmware
present in many devices that boot from Amlogic vendor u-boot.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220126044954.19069-3-christianshewitt@gmail.com
|
|
Add an additional reserved memory region for the BL32 trusted firmware
present in many devices that boot from Amlogic vendor u-boot.
Suggested-by: Mateusz Krzak <kszaquitto@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220126044954.19069-2-christianshewitt@gmail.com
|
|
GPIOE_2 is in AO domain and "<&gpio GPIOE_2 ...>" changes the state of
TF_PWR_EN of 'FC8731' on BPI-M5
Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220127151656.GA2419733@paju
|
|
The interrupt pin of the external ethernet phy is used, instead of the
enable-gpio pin of the tf-io regulator. The GPIOE_2 pin is located in
the gpio_ao bank.
This causes phy interrupt problems at system startup.
[ 76.645190] irq 36: nobody cared (try booting with the "irqpoll" option)
[ 76.649617] CPU: 0 PID: 1416 Comm: irq/36-0.0:00 Not tainted 5.16.0 #2
[ 76.649629] Hardware name: Hardkernel ODROID-HC4 (DT)
[ 76.649635] Call trace:
[ 76.649638] dump_backtrace+0x0/0x1c8
[ 76.649658] show_stack+0x14/0x60
[ 76.649667] dump_stack_lvl+0x64/0x7c
[ 76.649676] dump_stack+0x14/0x2c
[ 76.649683] __report_bad_irq+0x38/0xe8
[ 76.649695] note_interrupt+0x220/0x3a0
[ 76.649704] handle_irq_event_percpu+0x58/0x88
[ 76.649713] handle_irq_event+0x44/0xd8
[ 76.649721] handle_fasteoi_irq+0xa8/0x130
[ 76.649730] generic_handle_domain_irq+0x38/0x58
[ 76.649738] gic_handle_irq+0x9c/0xb8
[ 76.649747] call_on_irq_stack+0x28/0x38
[ 76.649755] do_interrupt_handler+0x7c/0x80
[ 76.649763] el1_interrupt+0x34/0x80
[ 76.649772] el1h_64_irq_handler+0x14/0x20
[ 76.649781] el1h_64_irq+0x74/0x78
[ 76.649788] irq_finalize_oneshot.part.56+0x68/0xf8
[ 76.649796] irq_thread_fn+0x5c/0x98
[ 76.649804] irq_thread+0x13c/0x260
[ 76.649812] kthread+0x144/0x178
[ 76.649822] ret_from_fork+0x10/0x20
[ 76.649830] handlers:
[ 76.653170] [<0000000025a6cd31>] irq_default_primary_handler threaded [<0000000093580eb7>] phy_interrupt
[ 76.661256] Disabling IRQ #36
Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")
Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: removed spurious invalid & blank lines from commit message]
Link: https://lore.kernel.org/r/20220127130537.GA187347@odroid-VirtualBox
|
|
Typo in audio amplifier node, dioo2133 -> dio2133
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Fixes: ef599f5f3e10 ("arm64: dts: meson: convert ODROID-N2 to dtsi")
Fixes: 67d141c1f8e6 ("arm64: dts: meson: odroid-n2: add jack audio output support")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/YfKQJejh0bfGYvof@anyang
|
