| Age | Commit message (Collapse) | Author |
|---|
|
Pull KVM fixes from Paolo Bonzini:
- Doc fixes
- selftests fixes
- Add runstate information to the new Xen support
- Allow compiling out the Xen interface
- 32-bit PAE without EPT bugfix
- NULL pointer dereference bugfix
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Clear the CR4 register on reset
KVM: x86/xen: Add support for vCPU runstate information
KVM: x86/xen: Fix return code when clearing vcpu_info and vcpu_time_info
selftests: kvm: Mmap the entire vcpu mmap area
KVM: Documentation: Fix index for KVM_CAP_PPC_DAWR1
KVM: x86: allow compiling out the Xen hypercall interface
KVM: xen: flush deferred static key before checking it
KVM: x86/mmu: Set SPTE_AD_WRPROT_ONLY_MASK if and only if PML is enabled
KVM: x86: hyper-v: Fix Hyper-V context null-ptr-deref
KVM: x86: remove misplaced comment on active_mmu_pages
KVM: Documentation: rectify rst markup in kvm_run->flags
Documentation: kvm: fix messy conversion from .txt to .rst
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two security issues (XSA-367 and XSA-369)"
* tag 'for-linus-5.12b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: fix p2m size in dom0 for disabled memory hotplug case
xen-netback: respect gnttab_map_refs()'s return value
Xen/gnttab: handle p2m update errors on a per-slot basis
|
|
Since commit 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated
memory") foreign mappings are using guest physical addresses allocated
via ZONE_DEVICE functionality.
This will result in problems for the case of no balloon memory hotplug
being configured, as the p2m list will only cover the initial memory
size of the domain. Any ZONE_DEVICE allocated address will be outside
the p2m range and thus a mapping can't be established with that memory
address.
Fix that by extending the p2m size for that case. At the same time add
a check for a to be created mapping to be within the p2m limits in
order to detect errors early.
While changing a comment, remove some 32-bit leftovers.
This is XSA-369.
Fixes: 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory")
Cc: <stable@vger.kernel.org> # 5.9
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Bailing immediately from set_foreign_p2m_mapping() upon a p2m updating
error leaves the full batch in an ambiguous state as far as the caller
is concerned. Instead flags respective slots as bad, unmapping what
was mapped there right away.
HYPERVISOR_grant_table_op()'s return value and the individual unmap
slots' status fields get used only for a one-time - there's not much we
can do in case of a failure.
Note that there's no GNTST_enomem or alike, so GNTST_general_error gets
used.
The map ops' handle fields get overwritten just to be on the safe side.
This is part of XSA-367.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/96cccf5d-e756-5f53-b91a-ea269bfb9be0@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Sergei and John both reported that ia64 failed to boot in 5.11, and it
was related to signals. Turns out the ia64 signal handling is a bit odd,
it doesn't check the return value of get_signal() for whether there's a
signal to deliver or not. With the introduction of TIF_NOTIFY_SIGNAL,
then task_work could trigger it.
Fix it by only calling handle_signal() if we actually have a real signal
to deliver. This brings it in line with all other archs, too.
Fixes: b269c229b0e8 ("ia64: add support for TIF_NOTIFY_SIGNAL")
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This problem was reported on a SVM guest while executing kexec.
Kexec fails to load the new kernel when the PCID feature is enabled.
When kexec starts loading the new kernel, it starts the process by
resetting the vCPU's and then bringing each vCPU online one by one.
The vCPU reset is supposed to reset all the register states before the
vCPUs are brought online. However, the CR4 register is not reset during
this process. If this register is already setup during the last boot,
all the flags can remain intact. The X86_CR4_PCIDE bit can only be
enabled in long mode. So, it must be enabled much later in SMP
initialization. Having the X86_CR4_PCIDE bit set during SMP boot can
cause a boot failures.
Fix the issue by resetting the CR4 register in init_vmcb().
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <161471109108.30811.6392805173629704166.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is how Xen guests do steal time accounting. The hypervisor records
the amount of time spent in each of running/runnable/blocked/offline
states.
In the Xen accounting, a vCPU is still in state RUNSTATE_running while
in Xen for a hypercall or I/O trap, etc. Only if Xen explicitly schedules
does the state become RUNSTATE_blocked. In KVM this means that even when
the vCPU exits the kvm_run loop, the state remains RUNSTATE_running.
The VMM can explicitly set the vCPU to RUNSTATE_blocked by using the
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT attribute, and can also use
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST to retrospectively add a given
amount of time to the blocked state and subtract it from the running
state.
The state_entry_time corresponds to get_kvmclock_ns() at the time the
vCPU entered the current state, and the total times of all four states
should always add up to state_entry_time.
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210301125309.874953-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When clearing the per-vCPU shared regions, set the return value to zero
to indicate success. This was causing spurious errors to be returned to
userspace on soft reset.
Also add a paranoid BUILD_BUG_ON() for compat structure compatibility.
Fixes: 0c165b3c01fe ("KVM: x86/xen: Allow reset of Xen attributes")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210301125309.874953-1-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Xen hypercall interface adds to the attack surface of the hypervisor
and will be used quite rarely. Allow compiling it out.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix UNUSED_KSYMS_WHITELIST for Clang LTO
- Make -s builds really silent irrespective of V= option
- Fix build error when SUBLEVEL or PATCHLEVEL is empty
* tag 'kbuild-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix <linux/version.h> for empty SUBLEVEL or PATCHLEVEL again
kbuild: make -s option take precedence over V=1
ia64: remove redundant READELF from arch/ia64/Makefile
kbuild: do not include include/config/auto.conf from adjust_autoksyms.sh
kbuild: fix UNUSED_KSYMS_WHITELIST for Clang LTO
kbuild: lto: add _mcount to list of used symbols
|
|
Pull arch/csky updates from Guo Ren:
"Features:
- add new memory layout 2.5G(user):1.5G(kernel)
- add kmemleak support
- reconstruct VDSO framework: add VDSO with GENERIC_GETTIMEOFDAY,
GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO
- add faulthandler_disabled() check
- support (fix) swapon
- add (fix) _PAGE_ACCESSED for default pgprot
- abort uaccess retries upon fatal signal (from arm)
Fixes and optimizations:
- fix perf probe failure
- fix show_regs doesn't contain regs->usp
- remove custom asm/atomic.h implementation
- fix barrier design
- fix futex SMP implementation
- fix asm/cmpxchg.h with correct ordering barrier
- cleanup asm/spinlock.h
- fix PTE global for 2.5:1.5 virtual memory
- remove prologue of page fault handler in entry.S
- fix TLB maintenance synchronization problem
- add show_tlb for CPU_CK860 debug
- fix FAULT_FLAG_XXX param for handle_mm_fault
- fix update_mmu_cache called with user io mapping
- fix do_page_fault parent irq status
- fix a size determination in gpr_get()
- pgtable.h: Coding convention
- kprobe: Fix code in simulate without 'long'
- fix pfn_valid error with wrong max_mapnr
- use free_initmem_default() in free_initmem()
- fix compile error"
* tag 'csky-for-linus-5.12-rc1' of git://github.com/c-sky/csky-linux: (30 commits)
csky: Fixup compile error
csky: use free_initmem_default() in free_initmem()
csky: Fixup pfn_valid error with wrong max_mapnr
csky: Add VDSO with GENERIC_GETTIMEOFDAY, GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO
csky: kprobe: Fixup code in simulate without 'long'
csky: Fixup swapon
csky: pgtable.h: Coding convention
csky: Fixup _PAGE_ACCESSED for default pgprot
csky: remove unused including <linux/version.h>
csky: Fix a size determination in gpr_get()
csky: Reconstruct VDSO framework
csky: mm: abort uaccess retries upon fatal signal
csky: Sync riscv mm/fault.c for easy maintenance
csky: Fixup do_page_fault parent irq status
csky: Add faulthandler_disabled() check
csky: Fixup update_mmu_cache called with user io mapping
csky: Fixup FAULT_FLAG_XXX param for handle_mm_fault
csky: Add show_tlb for CPU_CK860 debug
csky: Fix TLB maintenance synchronization problem
csky: Add kmemleak support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
"A pair of patches that slipped through the cracks:
- enable CPU hotplug in the defconfigs
- some cleanups to setup_bootmem
There's also a single fix for some randconfig build failures:
- make NUMA depend on SMP"
* tag 'riscv-for-linus-5.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Cleanup setup_bootmem()
RISC-V: Enable CPU Hotplug in defconfigs
RISC-V: Make NUMA depend on SMP
|
|
READELF is defined by the top Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Pull io_uring thread rewrite from Jens Axboe:
"This converts the io-wq workers to be forked off the tasks in question
instead of being kernel threads that assume various bits of the
original task identity.
This kills > 400 lines of code from io_uring/io-wq, and it's the worst
part of the code. We've had several bugs in this area, and the worry
is always that we could be missing some pieces for file types doing
unusual things (recent /dev/tty example comes to mind, userfaultfd
reads installing file descriptors is another fun one... - both of
which need special handling, and I bet it's not the last weird oddity
we'll find).
With these identical workers, we can have full confidence that we're
never missing anything. That, in itself, is a huge win. Outside of
that, it's also more efficient since we're not wasting space and code
on tracking state, or switching between different states.
I'm sure we're going to find little things to patch up after this
series, but testing has been pretty thorough, from the usual
regression suite to production. Any issue that may crop up should be
manageable.
There's also a nice series of further reductions we can do on top of
this, but I wanted to get the meat of it out sooner rather than later.
The general worry here isn't that it's fundamentally broken. Most of
the little issues we've found over the last week have been related to
just changes in how thread startup/exit is done, since that's the main
difference between using kthreads and these kinds of threads. In fact,
if all goes according to plan, I want to get this into the 5.10 and
5.11 stable branches as well.
That said, the changes outside of io_uring/io-wq are:
- arch setup, simple one-liner to each arch copy_thread()
implementation.
- Removal of net and proc restrictions for io_uring, they are no
longer needed or useful"
* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
io-wq: remove now unused IO_WQ_BIT_ERROR
io_uring: fix SQPOLL thread handling over exec
io-wq: improve manager/worker handling over exec
io_uring: ensure SQPOLL startup is triggered before error shutdown
io-wq: make buffered file write hashed work map per-ctx
io-wq: fix race around io_worker grabbing
io-wq: fix races around manager/worker creation and task exit
io_uring: ensure io-wq context is always destroyed for tasks
arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
io_uring: cleanup ->user usage
io-wq: remove nr_process accounting
io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
net: remove cmsg restriction from io_uring based send/recvmsg calls
Revert "proc: don't allow async path resolution of /proc/self components"
Revert "proc: don't allow async path resolution of /proc/thread-self components"
io_uring: move SQPOLL thread io-wq forked worker
io-wq: make io_wq_fork_thread() available to other users
io-wq: only remove worker from free_list, if it was there
io_uring: remove io_identity
io_uring: remove any grabbing of context
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted stuff pile - no common topic here"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
whack-a-mole: don't open-code iminor/imajor
9p: fix misuse of sscanf() in v9fs_stat2inode()
audit_alloc_mark(): don't open-code ERR_CAST()
fs/inode.c: make inode_init_always() initialize i_ino to 0
vfs: don't unnecessarily clone write access for writable fds
|
|
: error: C++ style comments are not allowed in ISO C90
// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
^
error: (this will be reported only once per input file)
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
|
The existing code is essentially
free_initmem_default()->free_reserved_area() without poisoning.
Note that existing code missed to update the managed page count of the
zone.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
|
|
The max_mapnr is the number of PFNs, not absolute PFN offset.
Using set_max_mapnr API instead of setting the value directly.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
|
HAVE_GENERIC_VDSO
It could help to reduce the latency of the time-related functions
in user space.
We have referenced arm's and riscv's implementation for the patch.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Vincent Chen <vincent.chen@sifive.com>
Cc: Arnd Bergmann <arnd@arndb.de>
|
|
The type of 'val' is 'unsigned long' in simulate_blz32, so 'val < 0'
can't be true.
Cast 'val' to 'long' here to determine branch token or not,
Fixup instructions: bnezad32, bhsz32, bhz32, blsz32, blz32
Link: https://lore.kernel.org/linux-csky/CAJF2gTQjKXR9gpo06WAWG1aquiT87mATiMGorXs6ChxOxoe90Q@mail.gmail.com/T/#t
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Menglong Dong <dong.menglong@zte.com.cn>
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
|
|
Current csky's swappon is broken by wrong swap PTE entry format.
Now redesign the new format for abiv1 & abiv2 and make swappon +
zram work properly on csky machines.
C-SKY PTE has VALID, DIRTY to emulate PRESENT, READ, WRITE, EXEC
attributes. GLOBAL bit is shared by two pages in the same tlb
entry. So we need to keep GLOBAL, VALID, PRESENT zero in swp_pte.
To distinguish PAGE_NONE and swp_pte, we need to use an additional
bit (abiv1 is _PAGE_READ, abiv2 is _PAGE_WRITE).
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
|
|
C-SKY page table attributes only have 'Dirty' and 'Valid' to
emulate 'PRESENT, READ, WRITE, EXEC, DIRTY, ACCESSED'.
This patch cleanup unnecessary definition.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
|
|
After the following patches,
commit de043da0b9e7 ("RISC-V: Fix usage of memblock_enforce_memory_limit")
commit 1bd14a66ee52 ("RISC-V: Remove any memblock representing unusable memory area")
commit b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
some logic is useless, kill the mem_start/start/end and unneeded code.
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The CPU hotplug support has been tested on QEMU, Spike, and SiFive
Unleashed so let's enable it by default in RV32 and RV64 defconfigs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
In theory these are orthogonal, but in practice all NUMA systems are
SMP. NUMA && !SMP doesn't build, everyone else is coupling them, and I
don't really see any value in supporting that configuration.
Fixes: 4f0e8eef772e ("riscv: Add numa support for riscv64 platform")
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Atish Patra <atishp@atishpatra.org>
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Pull OpenRISC updates from Stafford Horne:
- Update for Litex SoC controller to support wider width registers as
well as reset.
- Refactor SMP code to use device tree to define possible cpus.
- Update build including generating vmlinux.bin
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: Use devicetree to determine present cpus
drivers/soc/litex: Add restart handler
openrisc: add arch/openrisc/Kbuild
drivers/soc/litex: make 'litex_[set|get]_reg()' methods private
drivers/soc/litex: support 32-bit subregisters, 64-bit CPUs
drivers/soc/litex: s/LITEX_REG_SIZE/LITEX_SUBREG_ALIGN/g
drivers/soc/litex: separate MMIO from subregister offset calculation
drivers/soc/litex: move generic accessors to litex.h
openrisc: restart: Call common handlers before hanging
openrisc: Add vmlinux.bin target
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix physical vs virtual confusion in some basic mm macros and
routines. Caused by __pa == __va on s390 currently.
- Get rid of on-stack cpu masks.
- Add support for complete CPU counter set extraction.
- Add arch_irq_work_raise implementation.
- virtio-ccw revision and opcode fixes.
* tag 's390-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Add support for complete counter set extraction
virtio/s390: implement virtio-ccw revision 2 correctly
s390/smp: implement arch_irq_work_raise()
s390/topology: move cpumasks away from stack
s390/smp: smp_emergency_stop() - move cpumask away from stack
s390/smp: __smp_rescan_cpus() - move cpumask away from stack
s390/smp: consolidate locking for smp_rescan()
s390/mm: fix phys vs virt confusion in vmem_*() functions family
s390/mm: fix phys vs virt confusion in pgtable allocation routines
s390/mm: fix invalid __pa() usage in pfn_pXd() macros
s390/mm: make pXd_deref() macros return a pointer
s390/opcodes: rename selhhhr to selfhr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"A handful of new RISC-V related patches for this merge window:
- A check to ensure drivers are properly using uaccess. This isn't
manifesting with any of the drivers I'm currently using, but may
catch errors in new drivers.
- Some preliminary support for the FU740, along with the HiFive
Unleashed it will appear on.
- NUMA support for RISC-V, which involves making the arm64 code
generic.
- Support for kasan on the vmalloc region.
- A handful of new drivers for the Kendryte K210, along with the DT
plumbing required to boot on a handful of K210-based boards.
- Support for allocating ASIDs.
- Preliminary support for kernels larger than 128MiB.
- Various other improvements to our KASAN support, including the
utilization of huge pages when allocating the KASAN regions.
We may have already found a bug with the KASAN_VMALLOC code, but it's
passing my tests. There's a fix in the works, but that will probably
miss the merge window.
* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
riscv: Improve kasan population by using hugepages when possible
riscv: Improve kasan population function
riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
riscv: Improve kasan definitions
riscv: Get rid of MAX_EARLY_MAPPING_SIZE
soc: canaan: Sort the Makefile alphabetically
riscv: Disable KSAN_SANITIZE for vDSO
riscv: Remove unnecessary declaration
riscv: Add Canaan Kendryte K210 SD card defconfig
riscv: Update Canaan Kendryte K210 defconfig
riscv: Add Kendryte KD233 board device tree
riscv: Add SiPeed MAIXDUINO board device tree
riscv: Add SiPeed MAIX GO board device tree
riscv: Add SiPeed MAIX DOCK board device tree
riscv: Add SiPeed MAIX BiT board device tree
riscv: Update Canaan Kendryte K210 device tree
dt-bindings: add resets property to dw-apb-timer
dt-bindings: fix sifive gpio properties
dt-bindings: update sifive uart compatible string
dt-bindings: update sifive clint compatible string
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The big one is a fix for the VHE enabling path during early boot,
where the code enabling the MMU wasn't necessarily in the identity map
of the new page-tables, resulting in a consistent crash with 64k
pages. In fixing that, we noticed some missing barriers too, so we
added those for the sake of architectural compliance.
Other than that, just the usual merge window trickle. There'll be more
to come, too.
Summary:
- Fix lockdep false alarm on resume-from-cpuidle path
- Fix memory leak in kexec_file
- Fix module linker script to work with GDB
- Fix error code when trying to use uprobes with AArch32 instructions
- Fix late VHE enabling with 64k pages
- Add missing ISBs after TLB invalidation
- Fix seccomp when tracing syscall -1
- Fix stacktrace return code at end of stack
- Fix inconsistent whitespace for pointer return values
- Fix compiler warnings when building with W=1"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: stacktrace: Report when we reach the end of the stack
arm64: ptrace: Fix seccomp of traced syscall -1 (NO_SYSCALL)
arm64: Add missing ISB after invalidating TLB in enter_vhe
arm64: Add missing ISB after invalidating TLB in __primary_switch
arm64: VHE: Enable EL2 MMU from the idmap
KVM: arm64: make the hyp vector table entries local
arm64/mm: Fixed some coding style issues
arm64: uprobe: Return EOPNOTSUPP for AARCH32 instruction probing
kexec: move machine_kexec_post_load() to public interface
arm64 module: set plt* section addresses to 0x0
arm64: kexec_file: fix memory leakage in create_dtb() when fdt_open_into() fails
arm64: spectre: Prevent lockdep splat on v4 mitigation enable path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
"Only a single change. NULL parameter check in the local ColdFire
clocking code"
* tag 'm68knommu-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: let clk_enable() return immediately if clk is NULL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang LTO fixes from Kees Cook:
"This gets parisc building again and moves LTO artifact caching cleanup
from the 'distclean' build target to 'clean'.
Summary:
- Fix parisc build for ftrace vs mcount (Sami Tolvanen)
- Move .thinlto-cache remove to "clean" from "distclean" (Masahiro Yamada)"
* tag 'clang-lto-v5.12-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: Move .thinlto-cache removal to 'make clean'
parisc: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
|
|
Pull more KVM updates from Paolo Bonzini:
"x86:
- take into account HVA before retrying on MMU notifier race
- fixes for nested AMD guests without NPT
- allow INVPCID in guest without PCID
- disable PML in hardware when not in use
- MMU code cleanups:
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
KVM: SVM: Fix nested VM-Exit on #GP interception handling
KVM: vmx/pmu: Fix dummy check if lbr_desc->event is created
KVM: x86/mmu: Consider the hva in mmu_notifier retry
KVM: x86/mmu: Skip mmu_notifier check when handling MMIO page fault
KVM: Documentation: rectify rst markup in KVM_GET_SUPPORTED_HV_CPUID
KVM: nSVM: prepare guest save area while is_guest_mode is true
KVM: x86/mmu: Remove a variety of unnecessary exports
KVM: x86: Fold "write-protect large" use case into generic write-protect
KVM: x86/mmu: Don't set dirty bits when disabling dirty logging w/ PML
KVM: VMX: Dynamically enable/disable PML based on memslot dirty logging
KVM: x86: Further clarify the logic and comments for toggling log dirty
KVM: x86: Move MMU's PML logic to common code
KVM: x86/mmu: Make dirty log size hook (PML) a value, not a function
KVM: x86/mmu: Expand on the comment in kvm_vcpu_ad_need_write_protect()
KVM: nVMX: Disable PML in hardware when running L2
KVM: x86/mmu: Consult max mapping level when zapping collapsible SPTEs
KVM: x86/mmu: Pass the memslot to the rmap callbacks
KVM: x86/mmu: Split out max mapping level calculation to helper
KVM: x86/mmu: Expand collapsible SPTE zap for TDP MMU to ZONE_DEVICE and HugeTLB pages
KVM: nVMX: no need to undo inject_page_fault change on nested vmexit
...
|
|
Merge more updates from Andrew Morton:
"118 patches:
- The rest of MM.
Includes kfence - another runtime memory validator. Not as thorough
as KASAN, but it has unmeasurable overhead and is intended to be
usable in production builds.
- Everything else
Subsystems affected by this patch series: alpha, procfs, sysctl,
misc, core-kernel, MAINTAINERS, lib, bitops, checkpatch, init,
coredump, seq_file, gdb, ubsan, initramfs, and mm (thp, cma,
vmstat, memory-hotplug, mlock, rmap, zswap, zsmalloc, cleanups,
kfence, kasan2, and pagemap2)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
MIPS: make userspace mapping young by default
initramfs: panic with memory information
ubsan: remove overflow checks
kgdb: fix to kill breakpoints on initmem after boot
scripts/gdb: fix list_for_each
x86: fix seq_file iteration for pat/memtype.c
seq_file: document how per-entry resources are managed.
fs/coredump: use kmap_local_page()
init/Kconfig: fix a typo in CC_VERSION_TEXT help text
init: clean up early_param_on_off() macro
init/version.c: remove Version_<LINUX_VERSION_CODE> symbol
checkpatch: do not apply "initialise globals to 0" check to BPF progs
checkpatch: don't warn about colon termination in linker scripts
checkpatch: add kmalloc_array_node to unnecessary OOM message check
checkpatch: add warning for avoiding .L prefix symbols in assembly files
checkpatch: improve TYPECAST_INT_CONSTANT test message
checkpatch: prefer ftrace over function entry/exit printks
checkpatch: trivial style fixes
checkpatch: ignore warning designated initializers using NR_CPUS
checkpatch: improve blank line after declaration test
...
|
|
MIPS page fault path(except huge page) takes 3 exceptions (1 TLB Miss + 2
TLB Invalid), butthe second TLB Invalid exception is just triggered by
__update_tlb from do_page_fault writing tlb without _PAGE_VALID set. With
this patch, user space mapping prot is made young by default (with both
_PAGE_VALID and _PAGE_YOUNG set), and it only take 1 TLB Miss + 1 TLB
Invalid exception
Remove pte_sw_mkyoung without polluting MM code and make page fault delay
of MIPS on par with other architecture
Link: https://lkml.kernel.org/r/20210204013942.8398-1-huangpei@loongson.cn
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: <huangpei@loongson.cn>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <ambrosehua@gmail.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Li Xuefeng <lixuefeng@loongson.cn>
Cc: Yang Tiezhu <yangtiezhu@loongson.cn>
Cc: Gao Juxin <gaojuxin@loongson.cn>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The memtype seq_file iterator allocates a buffer in the ->start and ->next
functions and frees it in the ->show function. The preferred handling for
such resources is to free them in the subsequent ->next or ->stop function
call.
Since Commit 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration
code and interface") there is no guarantee that ->show will be called
after ->next, so this function can now leak memory.
So move the freeing of the buffer to ->next and ->stop.
Link: https://lkml.kernel.org/r/161248539022.21478.13874455485854739066.stgit@noble1
Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface")
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since CONFIG_EXPERIMENTAL was removed in 2013, go ahead and drop it
from any defconfig files.
Link: https://lkml.kernel.org/r/20210115005956.29408-1-rdunlap@infradead.org
Fixes: 3d374d09f16f ("final removal of CONFIG_EXPERIMENTAL")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This change provides a simpler implementation of mte_get_mem_tag(),
mte_get_random_tag(), and mte_set_mem_tag_range().
Simplifications include removing system_supports_mte() checks as these
functions are onlye called from KASAN runtime that had already checked
system_supports_mte(). Besides that, size and address alignment checks
are removed from mte_set_mem_tag_range(), as KASAN now does those.
This change also moves these functions into the asm/mte-kasan.h header and
implements mte_set_mem_tag_range() via inline assembly to avoid
unnecessary functions calls.
[vincenzo.frascino@arm.com: fix warning in mte_get_random_tag()]
Link: https://lkml.kernel.org/r/20210211152208.23811-1-vincenzo.frascino@arm.com
Link: https://lkml.kernel.org/r/a26121b294fdf76e369cb7a74351d1c03a908930.1612546384.git.andreyknvl@google.com
Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add KFENCE test suite, testing various error detection scenarios. Makes
use of KUnit for test organization. Since KFENCE's interface to obtain
error reports is via the console, the test verifies that KFENCE outputs
expected reports to the console.
[elver@google.com: fix typo in test]
Link: https://lkml.kernel.org/r/X9lHQExmHGvETxY4@elver.google.com
[elver@google.com: show access type in report]
Link: https://lkml.kernel.org/r/20210111091544.3287013-2-elver@google.com
Link: https://lkml.kernel.org/r/20201103175841.3495947-9-elver@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Co-developed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joern Engel <joern@purestorage.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Instead of removing the fault handling portion of the stack trace based on
the fault handler's name, just use struct pt_regs directly.
Change kfence_handle_page_fault() to take a struct pt_regs, and plumb it
through to kfence_report_error() for out-of-bounds, use-after-free, or
invalid access errors, where pt_regs is used to generate the stack trace.
If the kernel is a DEBUG_KERNEL, also show registers for more information.
Link: https://lkml.kernel.org/r/20201105092133.2075331-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add architecture specific implementation details for KFENCE and enable
KFENCE for the arm64 architecture. In particular, this implements the
required interface in <asm/kfence.h>.
KFENCE requires that attributes for pages from its memory pool can
individually be set. Therefore, force the entire linear map to be mapped
at page granularity. Doing so may result in extra memory allocated for
page tables in case rodata=full is not set; however, currently
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y is the default, and the common case
is therefore not affected by this change.
[elver@google.com: add missing copyright and description header]
Link: https://lkml.kernel.org/r/20210118092159.145934-3-elver@google.com
Link: https://lkml.kernel.org/r/20201103175841.3495947-4-elver@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Co-developed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joern Engel <joern@purestorage.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add architecture specific implementation details for KFENCE and enable
KFENCE for the x86 architecture. In particular, this implements the
required interface in <asm/kfence.h> for setting up the pool and
providing helper functions for protecting and unprotecting pages.
For x86, we need to ensure that the pool uses 4K pages, which is done
using the set_memory_4k() helper function.
[elver@google.com: add missing copyright and description header]
Link: https://lkml.kernel.org/r/20210118092159.145934-2-elver@google.com
Link: https://lkml.kernel.org/r/20201103175841.3495947-3-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Co-developed-by: Marco Elver <elver@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joern Engel <joern@purestorage.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This overrides arch_get_mappabble_range() on s390 platform which will be
used with recently added generic framework. It modifies the existing
range check in vmem_add_mapping() using arch_get_mappable_range(). It
also adds a VM_BUG_ON() check that would ensure that mhp_range_allowed()
has already been called on the hotplug path.
Link: https://lkml.kernel.org/r/1612149902-7867-4-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This overrides arch_get_mappable_range() on arm64 platform which will be
used with recently added generic framework. It drops
inside_linear_region() and subsequent check in arch_add_memory() which are
no longer required. It also adds a VM_BUG_ON() check that would ensure
that mhp_range_allowed() has already been called.
Link: https://lkml.kernel.org/r/1612149902-7867-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A missing flush would cause the static branch to trigger incorrectly.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Check that PML is actually enabled before setting the mask to force a
SPTE to be write-protected. The bits used for the !AD_ENABLED case are
in the upper half of the SPTE. With 64-bit paging and EPT, these bits
are ignored, but with 32-bit PAE paging they are reserved. Setting them
for L2 SPTEs without checking PML breaks NPT on 32-bit KVM.
Fixes: 1f4e5fc83a42 ("KVM: x86: fix nested guest live migration with PML")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210225204749.1512652-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reported by syzkaller:
KASAN: null-ptr-deref in range [0x0000000000000140-0x0000000000000147]
CPU: 1 PID: 8370 Comm: syz-executor859 Not tainted 5.11.0-syzkaller #0
RIP: 0010:synic_get arch/x86/kvm/hyperv.c:165 [inline]
RIP: 0010:kvm_hv_set_sint_gsi arch/x86/kvm/hyperv.c:475 [inline]
RIP: 0010:kvm_hv_irq_routing_update+0x230/0x460 arch/x86/kvm/hyperv.c:498
Call Trace:
kvm_set_irq_routing+0x69b/0x940 arch/x86/kvm/../../../virt/kvm/irqchip.c:223
kvm_vm_ioctl+0x12d0/0x2800 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3959
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
Hyper-V context is lazily allocated until Hyper-V specific MSRs are accessed
or SynIC is enabled. However, the syzkaller testcase sets irq routing table
directly w/o enabling SynIC. This results in null-ptr-deref when accessing
SynIC Hyper-V context. This patch fixes it.
syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=163342ccd00000
Reported-by: syzbot+6987f3b2dbd9eda95f12@syzkaller.appspotmail.com
Fixes: 8f014550dfb1 ("KVM: x86: hyper-v: Make Hyper-V emulation enablement conditional")
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1614326399-5762-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The 'mmu_page_hash' is used as hash table while 'active_mmu_pages' is a
list. Remove the misplaced comment as it's mostly stating the obvious
anyways.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210226061945.1222-1-dongli.zhang@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
parisc uses -fpatchable-function-entry with dynamic ftrace, which means we
don't need recordmcount. Select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
to tell that to the build system.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 3b15cdc15956 ("tracing: move function tracer options to Kconfig")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210224225706.2726050-1-samitolvanen@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull more MIPS updates from Thomas Bogendoerfer:
- added n64 block driver
- fix for ubsan warnings
- fix for bcm63xx platform
- update of linux-mips mailinglist
* tag 'mips_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
arch: mips: update references to current linux-mips list
mips: bmips: init clocks earlier
vmlinux.lds.h: catch even more instrumentation symbols into .data
n64: store dev instance into disk private data
n64: cleanup n64cart_probe()
n64: cosmetics changes
n64: remove curly brackets
n64: use sector SECTOR_SHIFT instead 512
n64: use enums for reg
n64: move module param at the top
n64: move module info at the end
n64: use pr_fmt to avoid duplicate string
block: Add n64 cart driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
* tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits)
initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD
kbuild: remove deprecated 'always' and 'hostprogs-y/m'
kbuild: parse C= and M= before changing the working directory
kbuild: reuse this-makefile to define abs_srctree
kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig
kconfig: omit --oldaskconfig option for 'make config'
kconfig: fix 'invalid option' for help option
kconfig: remove dead code in conf_askvalue()
kconfig: clean up nested if-conditionals in check_conf()
kconfig: Remove duplicate call to sym_get_string_value()
Makefile: Remove # characters from compiler string
Makefile: reuse CC_VERSION_TEXT
kbuild: check the minimum linker version in Kconfig
kbuild: remove ld-version macro
scripts: add generic syscallhdr.sh
scripts: add generic syscalltbl.sh
arch: syscalls: remove $(srctree)/ prefix from syscall tables
arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work
gen_compile_commands: prune some directories
kbuild: simplify access to the kernel's version
...
|
