| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes coming out of nap on 32-bit Book3s (eg. powerbooks).
- Fix critical and debug interrupts on BookE, seen as crashes when
using ptrace.
- Fix an oops when running an SMP kernel on a UP system.
- Update pseries LPAR security flavor after partition migration.
- Fix an oops when using kprobes on BookE.
- Fix oops on 32-bit pmac by not calling do_IRQ() from
timer_interrupt().
- Fix softlockups on CPU hotplug into a CPU-less node with xive (P9).
Thanks to Cédric Le Goater, Christophe Leroy, Finn Thain, Geetika
Moolchandani, Laurent Dufour, Laurent Vivier, Nicholas Piggin, Pu Lehui,
Radu Rendec, Srikar Dronamraju, and Stan Johnson.
* tag 'powerpc-5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xive: Do not skip CPU-less nodes when creating the IPIs
powerpc/interrupt: Do not call single_step_exception() from other exceptions
powerpc/interrupt: Fix OOPS by not calling do_IRQ() from timer_interrupt()
powerpc/kprobes: Fix kprobe Oops happens in booke
powerpc/pseries: Fix update of LPAR security flavor after LPM
powerpc/smp: Fix OOPS in topology_init()
powerpc/32: Fix critical and debug interrupts on BOOKE
powerpc/32s: Fix napping restore in data storage interrupt (DSI)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for PCI/MSI and x86 interrupt startup:
- Mask all MSI-X entries when enabling MSI-X otherwise stale unmasked
entries stay around e.g. when a crashkernel is booted.
- Enforce masking of a MSI-X table entry when updating it, which
mandatory according to speification
- Ensure that writes to MSI[-X} tables are flushed.
- Prevent invalid bits being set in the MSI mask register
- Properly serialize modifications to the mask cache and the mask
register for multi-MSI.
- Cure the violation of the affinity setting rules on X86 during
interrupt startup which can cause lost and stale interrupts. Move
the initial affinity setting ahead of actualy enabling the
interrupt.
- Ensure that MSI interrupts are completely torn down before freeing
them in the error handling case.
- Prevent an array out of bounds access in the irq timings code"
* tag 'irq-urgent-2021-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
driver core: Add missing kernel doc for device::msi_lock
genirq/msi: Ensure deactivation on teardown
genirq/timings: Prevent potential array overflow in __irq_timings_store()
x86/msi: Force affinity setup before startup
x86/ioapic: Force affinity setup before startup
genirq: Provide IRQCHIP_AFFINITY_PRE_STARTUP
PCI/MSI: Protect msi_desc::masked for multi-MSI
PCI/MSI: Use msi_mask_irq() in pci_msi_shutdown()
PCI/MSI: Correct misleading comments
PCI/MSI: Do not set invalid bits in MSI mask
PCI/MSI: Enforce MSI[X] entry updates to be visible
PCI/MSI: Enforce that MSI-X table entry is masked for update
PCI/MSI: Mask all unused MSI-X entries
PCI/MSI: Enable and mask MSI-X early
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"Two fixes:
- An objdump checker fix to ignore parenthesized strings in the
objdump version
- Fix resctrl default monitoring groups reporting when new subgroups
get created"
* tag 'x86_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix default monitoring groups reporting
x86/tools: Fix objdump version check again
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Plug race between enabling MTE and creating vcpus
- Fix off-by-one bug when checking whether an address range is RAM
x86:
- Fixes for the new MMU, especially a memory leak on hosts with <39
physical address bits
- Remove bogus EFER.NX checks on 32-bit non-PAE hosts
- WAITPKG fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Protect marking SPs unsync when using TDP MMU with spinlock
KVM: x86/mmu: Don't step down in the TDP iterator when zapping all SPTEs
KVM: x86/mmu: Don't leak non-leaf SPTEs when zapping all SPTEs
KVM: nVMX: Use vmx_need_pf_intercept() when deciding if L0 wants a #PF
kvm: vmx: Sync all matching EPTPs when injecting nested EPT fault
KVM: x86: remove dead initialization
KVM: x86: Allow guest to set EFER.NX=1 on non-PAE 32-bit kernels
KVM: VMX: Use current VMCS to query WAITPKG support for MSR emulation
KVM: arm64: Fix race when enabling KVM_ARM_CAP_MTE
KVM: arm64: Fix off-by-one in range_is_memory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- avoid passing -mno-relax to compilers that don't support it
- a comment fix
* tag 'riscv-for-linus-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix comment regarding kernel mapping overlapping with IS_ERR_VALUE
riscv: kexec: do not add '-mno-relax' flag if compiler doesn't support it
|
|
Merge topic branch with fixes for both 5.14-rc6 and 5.15.
|
|
Add yet another spinlock for the TDP MMU and take it when marking indirect
shadow pages unsync. When using the TDP MMU and L1 is running L2(s) with
nested TDP, KVM may encounter shadow pages for the TDP entries managed by
L1 (controlling L2) when handling a TDP MMU page fault. The unsync logic
is not thread safe, e.g. the kvm_mmu_page fields are not atomic, and
misbehaves when a shadow page is marked unsync via a TDP MMU page fault,
which runs with mmu_lock held for read, not write.
Lack of a critical section manifests most visibly as an underflow of
unsync_children in clear_unsync_child_bit() due to unsync_children being
corrupted when multiple CPUs write it without a critical section and
without atomic operations. But underflow is the best case scenario. The
worst case scenario is that unsync_children prematurely hits '0' and
leads to guest memory corruption due to KVM neglecting to properly sync
shadow pages.
Use an entirely new spinlock even though piggybacking tdp_mmu_pages_lock
would functionally be ok. Usurping the lock could degrade performance when
building upper level page tables on different vCPUs, especially since the
unsync flow could hold the lock for a comparatively long time depending on
the number of indirect shadow pages and the depth of the paging tree.
For simplicity, take the lock for all MMUs, even though KVM could fairly
easily know that mmu_lock is held for write. If mmu_lock is held for
write, there cannot be contention for the inner spinlock, and marking
shadow pages unsync across multiple vCPUs will be slow enough that
bouncing the kvm_arch cacheline should be in the noise.
Note, even though L2 could theoretically be given access to its own EPT
entries, a nested MMU must hold mmu_lock for write and thus cannot race
against a TDP MMU page fault. I.e. the additional spinlock only _needs_ to
be taken by the TDP MMU, as opposed to being taken by any MMU for a VM
that is running with the TDP MMU enabled. Holding mmu_lock for read also
prevents the indirect shadow page from being freed. But as above, keep
it simple and always take the lock.
Alternative #1, the TDP MMU could simply pass "false" for can_unsync and
effectively disable unsync behavior for nested TDP. Write protecting leaf
shadow pages is unlikely to noticeably impact traditional L1 VMMs, as such
VMMs typically don't modify TDP entries, but the same may not hold true for
non-standard use cases and/or VMMs that are migrating physical pages (from
L1's perspective).
Alternative #2, the unsync logic could be made thread safe. In theory,
simply converting all relevant kvm_mmu_page fields to atomics and using
atomic bitops for the bitmap would suffice. However, (a) an in-depth audit
would be required, (b) the code churn would be substantial, and (c) legacy
shadow paging would incur additional atomic operations in performance
sensitive paths for no benefit (to legacy shadow paging).
Fixes: a2855afc7ee8 ("KVM: x86/mmu: Allow parallel page faults for the TDP MMU")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210812181815.3378104-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Set the min_level for the TDP iterator at the root level when zapping all
SPTEs to optimize the iterator's try_step_down(). Zapping a non-leaf
SPTE will recursively zap all its children, thus there is no need for the
iterator to attempt to step down. This avoids rereading the top-level
SPTEs after they are zapped by causing try_step_down() to short-circuit.
In most cases, optimizing try_step_down() will be in the noise as the cost
of zapping SPTEs completely dominates the overall time. The optimization
is however helpful if the zap occurs with relatively few SPTEs, e.g. if KVM
is zapping in response to multiple memslot updates when userspace is adding
and removing read-only memslots for option ROMs. In that case, the task
doing the zapping likely isn't a vCPU thread, but it still holds mmu_lock
for read and thus can be a noisy neighbor of sorts.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210812181414.3376143-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pass "all ones" as the end GFN to signal "zap all" for the TDP MMU and
really zap all SPTEs in this case. As is, zap_gfn_range() skips non-leaf
SPTEs whose range exceeds the range to be zapped. If shadow_phys_bits is
not aligned to the range size of top-level SPTEs, e.g. 512gb with 4-level
paging, the "zap all" flows will skip top-level SPTEs whose range extends
beyond shadow_phys_bits and leak their SPs when the VM is destroyed.
Use the current upper bound (based on host.MAXPHYADDR) to detect that the
caller wants to zap all SPTEs, e.g. instead of using the max theoretical
gfn, 1 << (52 - 12). The more precise upper bound allows the TDP iterator
to terminate its walk earlier when running on hosts with MAXPHYADDR < 52.
Add a WARN on kmv->arch.tdp_mmu_pages when the TDP MMU is destroyed to
help future debuggers should KVM decide to leak SPTEs again.
The bug is most easily reproduced by running (and unloading!) KVM in a
VM whose host.MAXPHYADDR < 39, as the SPTE for gfn=0 will be skipped.
=============================================================================
BUG kvm_mmu_page_header (Not tainted): Objects remaining in kvm_mmu_page_header on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Slab 0x000000004d8f7af1 objects=22 used=2 fp=0x00000000624d29ac flags=0x4000000000000200(slab|zone=1)
CPU: 0 PID: 1582 Comm: rmmod Not tainted 5.14.0-rc2+ #420
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack_lvl+0x45/0x59
slab_err+0x95/0xc9
__kmem_cache_shutdown.cold+0x3c/0x158
kmem_cache_destroy+0x3d/0xf0
kvm_mmu_module_exit+0xa/0x30 [kvm]
kvm_arch_exit+0x5d/0x90 [kvm]
kvm_exit+0x78/0x90 [kvm]
vmx_exit+0x1a/0x50 [kvm_intel]
__x64_sys_delete_module+0x13f/0x220
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: faaf05b00aec ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210812181414.3376143-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.14, take #2
- Plug race between enabling MTE and creating vcpus
- Fix off-by-one bug when checking whether an address range is RAM
|
|
Use vmx_need_pf_intercept() when determining if L0 wants to handle a #PF
in L2 or if the VM-Exit should be forwarded to L1. The current logic fails
to account for the case where #PF is intercepted to handle
guest.MAXPHYADDR < host.MAXPHYADDR and ends up reflecting all #PFs into
L1. At best, L1 will complain and inject the #PF back into L2. At
worst, L1 will eat the unexpected fault and cause L2 to hang on infinite
page faults.
Note, while the bug was technically introduced by the commit that added
support for the MAXPHYADDR madness, the shame is all on commit
a0c134347baf ("KVM: VMX: introduce vmx_need_pf_intercept").
Fixes: 1dbf5d68af6f ("KVM: VMX: Add guest physical address check in EPT violation and misconfig")
Cc: stable@vger.kernel.org
Cc: Peter Shier <pshier@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210812045615.3167686-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When a nested EPT violation/misconfig is injected into the guest,
the shadow EPT PTEs associated with that address need to be synced.
This is done by kvm_inject_emulated_page_fault() before it calls
nested_ept_inject_page_fault(). However, that will only sync the
shadow EPT PTE associated with the current L1 EPTP. Since the ASID
is based on EP4TA rather than the full EPTP, so syncing the current
EPTP is not enough. The SPTEs associated with any other L1 EPTPs
in the prev_roots cache with the same EP4TA also need to be synced.
Signed-off-by: Junaid Shahid <junaids@google.com>
Message-Id: <20210806222229.1645356-1-junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Merge common topic branch for 5.14-rc6 and 5.15 merge window.
|
|
hv_vcpu is initialized again a dozen lines below, and at this
point vcpu->arch.hyperv is not valid. Remove the initializer.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove an ancient restriction that disallowed exposing EFER.NX to the
guest if EFER.NX=0 on the host, even if NX is fully supported by the CPU.
The motivation of the check, added by commit 2cc51560aed0 ("KVM: VMX:
Avoid saving and restoring msr_efer on lightweight vmexit"), was to rule
out the case of host.EFER.NX=0 and guest.EFER.NX=1 so that KVM could run
the guest with the host's EFER.NX and thus avoid context switching EFER
if the only divergence was the NX bit.
Fast forward to today, and KVM has long since stopped running the guest
with the host's EFER.NX. Not only does KVM context switch EFER if
host.EFER.NX=1 && guest.EFER.NX=0, KVM also forces host.EFER.NX=0 &&
guest.EFER.NX=1 when using shadow paging (to emulate SMEP). Furthermore,
the entire motivation for the restriction was made obsolete over a decade
ago when Intel added dedicated host and guest EFER fields in the VMCS
(Nehalem timeframe), which reduced the overhead of context switching EFER
from 400+ cycles (2 * WRMSR + 1 * RDMSR) to a mere ~2 cycles.
In practice, the removed restriction only affects non-PAE 32-bit kernels,
as EFER.NX is set during boot if NX is supported and the kernel will use
PAE paging (32-bit or 64-bit), regardless of whether or not the kernel
will actually use NX itself (mark PTEs non-executable).
Alternatively and/or complementarily, startup_32_smp() in head_32.S could
be modified to set EFER.NX=1 regardless of paging mode, thus eliminating
the scenario where NX is supported but not enabled. However, that runs
the risk of breaking non-KVM non-PAE kernels (though the risk is very,
very low as there are no known EFER.NX errata), and also eliminates an
easy-to-use mechanism for stressing KVM's handling of guest vs. host EFER
across nested virtualization transitions.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210805183804.1221554-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Creating a new sub monitoring group in the root /sys/fs/resctrl leads to
getting the "Unavailable" value for mbm_total_bytes and mbm_local_bytes
on the entire filesystem.
Steps to reproduce:
1. mount -t resctrl resctrl /sys/fs/resctrl/
2. cd /sys/fs/resctrl/
3. cat mon_data/mon_L3_00/mbm_total_bytes
23189832
4. Create sub monitor group:
mkdir mon_groups/test1
5. cat mon_data/mon_L3_00/mbm_total_bytes
Unavailable
When a new monitoring group is created, a new RMID is assigned to the
new group. But the RMID is not active yet. When the events are read on
the new RMID, it is expected to report the status as "Unavailable".
When the user reads the events on the default monitoring group with
multiple subgroups, the events on all subgroups are consolidated
together. Currently, if any of the RMID reads report as "Unavailable",
then everything will be reported as "Unavailable".
Fix the issue by discarding the "Unavailable" reads and reporting all
the successful RMID reads. This is not a problem on Intel systems as
Intel reports 0 on Inactive RMIDs.
Fixes: d89b7379015f ("x86/intel_rdt/cqm: Add mon_data")
Reported-by: Paweł Szulik <pawel.szulik@intel.com>
Signed-off-by: Babu Moger <Babu.Moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213311
Link: https://lkml.kernel.org/r/162793309296.9224.15871659871696482080.stgit@bmoger-ubuntu
|
|
Skip (omit) any version string info that is parenthesized.
Warning: objdump version 15) is older than 2.19
Warning: Skipping posttest.
where 'objdump -v' says:
GNU objdump (GNU Binutils; SUSE Linux Enterprise 15) 2.35.1.20201123-7.18
Fixes: 8bee738bb1979 ("x86: Fix objdump version check in chkobjdump.awk for different formats.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210731000146.2720-1-rdunlap@infradead.org
|
|
The current comment states that we check if the 64-bit kernel mapping
overlaps with the last 4K of the address space that is reserved to
error values in create_kernel_page_table, which is not the case since it
is done in setup_vm. But anyway, remove the reference to any function
and simply note that in 64-bit kernel, the check should be done as soon
as the kernel mapping base address is known.
Fixes: db6b84a368b4 ("riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUE")
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The RISC-V special option '-mno-relax' which to disable linker relaxations
is supported by GCC8+. For GCC7 and lower versions do not support this
option.
Fixes: fba8a8674f68 ("RISC-V: Add kexec support")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
On PowerVM, CPU-less nodes can be populated with hot-plugged CPUs at
runtime. Today, the IPI is not created for such nodes, and hot-plugged
CPUs use a bogus IPI, which leads to soft lockups.
We can not directly allocate and request the IPI on demand because
bringup_up() is called under the IRQ sparse lock. The alternative is
to allocate the IPIs for all possible nodes at startup and to request
the mapping on demand when the first CPU of a node is brought up.
Fixes: 7dcc37b3eff9 ("powerpc/xive: Map one IPI interrupt per node")
Cc: stable@vger.kernel.org # v5.13
Reported-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210807072057.184698-1-clg@kaod.org
|
|
single_step_exception() is called by emulate_single_step() which
is called from (at least) alignment exception() handler and
program_check_exception() handler.
Redefine it as a regular __single_step_exception() which is called
by both single_step_exception() handler and emulate_single_step()
function.
Fixes: 3a96570ffceb ("powerpc: convert interrupt handlers to use wrappers")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aed174f5cbc06f2cf95233c071d8aac948e46043.1628611921.git.christophe.leroy@csgroup.eu
|
|
An interrupt handler shall not be called from another interrupt
handler otherwise this leads to problems like the following:
Kernel attempted to write user page (afd4fa84) - exploit attempt? (uid: 1000)
------------[ cut here ]------------
Bug: Write fault blocked by KUAP!
WARNING: CPU: 0 PID: 1617 at arch/powerpc/mm/fault.c:230 do_page_fault+0x484/0x720
Modules linked in:
CPU: 0 PID: 1617 Comm: sshd Tainted: G W 5.13.0-pmac-00010-g8393422eb77 #7
NIP: c001b77c LR: c001b77c CTR: 00000000
REGS: cb9e5bc0 TRAP: 0700 Tainted: G W (5.13.0-pmac-00010-g8393422eb77)
MSR: 00021032 <ME,IR,DR,RI> CR: 24942424 XER: 00000000
GPR00: c001b77c cb9e5c80 c1582c00 00000021 3ffffbff 085b0000 00000027 c8eb644c
GPR08: 00000023 00000000 00000000 00000000 24942424 0063f8c8 00000000 000186a0
GPR16: afd52dd4 afd52dd0 afd52dcc afd52dc8 0065a990 c07640c4 cb9e5e98 cb9e5e90
GPR24: 00000040 afd4fa96 00000040 02000000 c1fda6c0 afd4fa84 00000300 cb9e5cc0
NIP [c001b77c] do_page_fault+0x484/0x720
LR [c001b77c] do_page_fault+0x484/0x720
Call Trace:
[cb9e5c80] [c001b77c] do_page_fault+0x484/0x720 (unreliable)
[cb9e5cb0] [c000424c] DataAccess_virt+0xd4/0xe4
--- interrupt: 300 at __copy_tofrom_user+0x110/0x20c
NIP: c001f9b4 LR: c03250a0 CTR: 00000004
REGS: cb9e5cc0 TRAP: 0300 Tainted: G W (5.13.0-pmac-00010-g8393422eb77)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 48028468 XER: 20000000
DAR: afd4fa84 DSISR: 0a000000
GPR00: 20726f6f cb9e5d80 c1582c00 00000004 cb9e5e3a 00000016 afd4fa80 00000000
GPR08: 3835202d 72777872 2d78722d 00000004 28028464 0063f8c8 00000000 000186a0
GPR16: afd52dd4 afd52dd0 afd52dcc afd52dc8 0065a990 c07640c4 cb9e5e98 cb9e5e90
GPR24: 00000040 afd4fa96 00000040 cb9e5e0c 00000daa a0000000 cb9e5e98 afd4fa56
NIP [c001f9b4] __copy_tofrom_user+0x110/0x20c
LR [c03250a0] _copy_to_iter+0x144/0x990
--- interrupt: 300
[cb9e5d80] [c03e89c0] n_tty_read+0xa4/0x598 (unreliable)
[cb9e5df0] [c03e2a0c] tty_read+0xdc/0x2b4
[cb9e5e80] [c0156bf8] vfs_read+0x274/0x340
[cb9e5f00] [c01571ac] ksys_read+0x70/0x118
[cb9e5f30] [c0016048] ret_from_syscall+0x0/0x28
--- interrupt: c00 at 0xa7855c88
NIP: a7855c88 LR: a7855c5c CTR: 00000000
REGS: cb9e5f40 TRAP: 0c00 Tainted: G W (5.13.0-pmac-00010-g8393422eb77)
MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 2402446c XER: 00000000
GPR00: 00000003 afd4ec70 a72137d0 0000000b afd4ecac 00004000 0065a990 00000800
GPR08: 00000000 a7947930 00000000 00000004 c15831b0 0063f8c8 00000000 000186a0
GPR16: afd52dd4 afd52dd0 afd52dcc afd52dc8 0065a990 0065a9e0 00000001 0065fac0
GPR24: 00000000 00000089 00664050 00000000 00668e30 a720c8dc a7943ff4 0065f9b0
NIP [a7855c88] 0xa7855c88
LR [a7855c5c] 0xa7855c5c
--- interrupt: c00
Instruction dump:
3884aa88 38630178 48076861 807f0080 48042e45 2f830000 419e0148 3c80c079
3c60c076 38841be4 386301c0 4801f705 <0fe00000> 3860000b 4bfffe30 3c80c06b
---[ end trace fd69b91a8046c2e5 ]---
Here the problem is that by re-enterring an exception handler,
kuap_save_and_lock() is called a second time with this time KUAP
access locked, leading to regs->kuap being overwritten hence
KUAP not being unlocked at exception exit as expected.
Do not call do_IRQ() from timer_interrupt() directly. Instead,
redefine do_IRQ() as a standard function named __do_IRQ(), and
call it from both do_IRQ() and time_interrupt() handlers.
Fixes: 3a96570ffceb ("powerpc: convert interrupt handlers to use wrappers")
Cc: stable@vger.kernel.org # v5.12+
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c17d234f4927d39a1d7100864a8e1145323d33a0.1628611927.git.christophe.leroy@csgroup.eu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Fix FPU_STATUS update
- Update my email address
- Other spellos and fixes
* tag 'arc-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
MAINTAINERS: update Vineet's email address
ARC: fp: set FPU_STATUS.FWE to enable FPU_STATUS update on context switch
ARC: Fix CONFIG_STACKDEPOT
arc: Fix spelling mistake and grammar in Kconfig
arc: Prefer unsigned int to bare use of unsigned
|
|
Use the secondary_exec_controls_get() accessor in vmx_has_waitpkg() to
effectively get the controls for the current VMCS, as opposed to using
vmx->secondary_exec_controls, which is the cached value of KVM's desired
controls for vmcs01 and truly not reflective of any particular VMCS.
While the waitpkg control is not dynamic, i.e. vmcs01 will always hold
the same waitpkg configuration as vmx->secondary_exec_controls, the same
does not hold true for vmcs02 if the L1 VMM hides the feature from L2.
If L1 hides the feature _and_ does not intercept MSR_IA32_UMWAIT_CONTROL,
L2 could incorrectly read/write L1's virtual MSR instead of taking a #GP.
Fixes: 6e3ba4abcea5 ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210810171952.2758100-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The X86 MSI mechanism cannot handle interrupt affinity changes safely after
startup other than from an interrupt handler, unless interrupt remapping is
enabled. The startup sequence in the generic interrupt code violates that
assumption.
Mark the irq chips with the new IRQCHIP_AFFINITY_PRE_STARTUP flag so that
the default interrupt setting happens before the interrupt is started up
for the first time.
While the interrupt remapping MSI chip does not require this, there is no
point in treating it differently as this might spare an interrupt to a CPU
which is not in the default affinity mask.
For the non-remapping case go to the direct write path when the interrupt
is not yet started similar to the not yet activated case.
Fixes: 18404756765c ("genirq: Expose default irq affinity mask (take 3)")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.886722080@linutronix.de
|
|
The IO/APIC cannot handle interrupt affinity changes safely after startup
other than from an interrupt handler. The startup sequence in the generic
interrupt code violates that assumption.
Mark the irq chip with the new IRQCHIP_AFFINITY_PRE_STARTUP flag so that
the default interrupt setting happens before the interrupt is started up
for the first time.
Fixes: 18404756765c ("genirq: Expose default irq affinity mask (take 3)")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.832143400@linutronix.de
|
|
When using kprobe on powerpc booke series processor, Oops happens
as show bellow:
/ # echo "p:myprobe do_nanosleep" > /sys/kernel/debug/tracing/kprobe_events
/ # echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable
/ # sleep 1
[ 50.076730] Oops: Exception in kernel mode, sig: 5 [#1]
[ 50.077017] BE PAGE_SIZE=4K SMP NR_CPUS=24 QEMU e500
[ 50.077221] Modules linked in:
[ 50.077462] CPU: 0 PID: 77 Comm: sleep Not tainted 5.14.0-rc4-00022-g251a1524293d #21
[ 50.077887] NIP: c0b9c4e0 LR: c00ebecc CTR: 00000000
[ 50.078067] REGS: c3883de0 TRAP: 0700 Not tainted (5.14.0-rc4-00022-g251a1524293d)
[ 50.078349] MSR: 00029000 <CE,EE,ME> CR: 24000228 XER: 20000000
[ 50.078675]
[ 50.078675] GPR00: c00ebdf0 c3883e90 c313e300 c3883ea0 00000001 00000000 c3883ecc 00000001
[ 50.078675] GPR08: c100598c c00ea250 00000004 00000000 24000222 102490c2 bff4180c 101e60d4
[ 50.078675] GPR16: 00000000 102454ac 00000040 10240000 10241100 102410f8 10240000 00500000
[ 50.078675] GPR24: 00000002 00000000 c3883ea0 00000001 00000000 0000c350 3b9b8d50 00000000
[ 50.080151] NIP [c0b9c4e0] do_nanosleep+0x0/0x190
[ 50.080352] LR [c00ebecc] hrtimer_nanosleep+0x14c/0x1e0
[ 50.080638] Call Trace:
[ 50.080801] [c3883e90] [c00ebdf0] hrtimer_nanosleep+0x70/0x1e0 (unreliable)
[ 50.081110] [c3883f00] [c00ec004] sys_nanosleep_time32+0xa4/0x110
[ 50.081336] [c3883f40] [c001509c] ret_from_syscall+0x0/0x28
[ 50.081541] --- interrupt: c00 at 0x100a4d08
[ 50.081749] NIP: 100a4d08 LR: 101b5234 CTR: 00000003
[ 50.081931] REGS: c3883f50 TRAP: 0c00 Not tainted (5.14.0-rc4-00022-g251a1524293d)
[ 50.082183] MSR: 0002f902 <CE,EE,PR,FP,ME> CR: 24000222 XER: 00000000
[ 50.082457]
[ 50.082457] GPR00: 000000a2 bf980040 1024b4d0 bf980084 bf980084 64000000 00555345 fefefeff
[ 50.082457] GPR08: 7f7f7f7f 101e0000 00000069 00000003 28000422 102490c2 bff4180c 101e60d4
[ 50.082457] GPR16: 00000000 102454ac 00000040 10240000 10241100 102410f8 10240000 00500000
[ 50.082457] GPR24: 00000002 bf9803f4 10240000 00000000 00000000 100039e0 00000000 102444e8
[ 50.083789] NIP [100a4d08] 0x100a4d08
[ 50.083917] LR [101b5234] 0x101b5234
[ 50.084042] --- interrupt: c00
[ 50.084238] Instruction dump:
[ 50.084483] 4bfffc40 60000000 60000000 60000000 9421fff0 39400402 914200c0 38210010
[ 50.084841] 4bfffc20 00000000 00000000 00000000 <7fe00008> 7c0802a6 7c892378 93c10048
[ 50.085487] ---[ end trace f6fffe98e2fa8f3e ]---
[ 50.085678]
Trace/breakpoint trap
There is no real mode for booke arch and the MMU translation is
always on. The corresponding MSR_IS/MSR_DS bit in booke is used
to switch the address space, but not for real mode judgment.
Fixes: 21f8b2fa3ca5 ("powerpc/kprobes: Ignore traps that happened in real mode")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210809023658.218915-1-pulehui@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of perf fixes:
- Correct the permission checks for perf event which send SIGTRAP to
a different process and clean up that code to be more readable.
- Prevent an out of bound MSR access in the x86 perf code which
happened due to an incomplete limiting to the actually available
hardware counters.
- Prevent access to the AMD64_EVENTSEL_HOSTONLY bit when running
inside a guest.
- Handle small core counter re-enabling correctly by issuing an ACK
right before reenabling it to prevent a stale PEBS record being
kept around"
* tag 'perf-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Apply mid ACK for small core
perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest
perf/x86: Fix out of bound MSR access
perf: Refactor permissions check into perf_check_permission()
perf: Fix required permissions if sigtrap is requested
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial driver fixes for 5.14-rc5 to resolve a
number of reported problems.
They include:
- mips serial driver fixes
- 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- other tiny driver fixes
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_pci: Avoid irq sharing for MSI(-X) interrupts.
serial: 8250_mtk: fix uart corruption issue when rx power off
tty: serial: fsl_lpuart: fix the wrong return value in lpuart32_get_mctrl
serial: 8250_pci: Enumerate Elkhart Lake UARTs via dedicated driver
serial: 8250: fix handle_irq locking
serial: tegra: Only print FIFO error message when an error occurs
MIPS: Malta: Do not byte-swap accesses to the CBUS UART
serial: 8250: Mask out floating 16/32-bit bus bits
serial: max310x: Unprepare and disable clock in error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- avoid dereferencing a null task pointer while walking the stack
- fix the memory size in the HiFive Unleashed device tree
- disable stack protectors when randstruct is enabled, which results in
non-deterministic offsets during module builds
- a pair of fixes to avoid relying on a constant physical memory base
for the non-XIP builds
* tag 'riscv-for-linus-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Revert "riscv: Remove CONFIG_PHYS_RAM_BASE_FIXED"
riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion
riscv: Disable STACKPROTECTOR_PER_TASK if GCC_PLUGIN_RANDSTRUCT is enabled
riscv: dts: fix memory size for the SiFive HiFive Unmatched
riscv: stacktrace: Fix NULL pointer dereference
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Correct the Extended Regular Expressions in tools
- Adjust scripts/checkversion.pl for the current Kbuild
- Unset sub_make_done for 'make install' to make DKMS work again
* tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: cancel sub_make_done for the install target to fix DKMS
scripts: checkversion: modernize linux/version.h search strings
mips: Fix non-POSIX regexp
x86/tools/relocs: Fix non-POSIX regexp
|
|
This reverts commit 9b79878ced8f7ab85c57623f8b1f6882e484a316.
The removal of this config exposes CONFIG_PHYS_RAM_BASE for all kernel
types: this value being implementation-specific, this breaks the
genericity of the RISC-V kernel so revert it.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The usage of CONFIG_PHYS_RAM_BASE for all kernel types was a mistake:
this value is implementation-specific and this breaks the genericity of
the RISC-V kernel.
Fix this by introducing a new variable phys_ram_base that holds this
value at runtime and use it in the kernel physical address conversion
macro. Since this value is used only for XIP kernels, evaluate it only if
CONFIG_XIP_KERNEL is set which in addition optimizes this macro for
standard kernels at compile-time.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 44c922572952 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
After LPM, when migrating from a system with security mitigation enabled
to a system with mitigation disabled, the security flavor exposed in
/proc is not correctly set back to 0.
Do not assume the value of the security flavor is set to 0 when entering
init_cpu_char_feature_flags(), so when called after a LPM, the value is
set correctly even if the mitigation are not turned off.
Fixes: 6ce56e1ac380 ("powerpc/pseries: export LPAR security flavor in lparcfg")
Cc: stable@vger.kernel.org # v5.13+
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210805152308.33988-1-ldufour@linux.ibm.com
|
|
Running an SMP kernel on an UP platform not prepared for it,
I encountered the following OOPS:
BUG: Kernel NULL pointer dereference on read at 0x00000034
Faulting instruction address: 0xc0a04110
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K SMP NR_CPUS=2 CMPCPRO
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-pmac-00001-g230fedfaad21 #5234
NIP: c0a04110 LR: c0a040d8 CTR: c0a04084
REGS: e100dda0 TRAP: 0300 Not tainted (5.13.0-pmac-00001-g230fedfaad21)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 84000284 XER: 00000000
DAR: 00000034 DSISR: 20000000
GPR00: c0006bd4 e100de60 c1033320 00000000 00000000 c0942274 00000000 00000000
GPR08: 00000000 00000000 00000001 00000063 00000007 00000000 c0006f30 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000005
GPR24: c0c67d74 c0c67f1c c0c60000 c0c67d70 c0c0c558 1efdf000 c0c00020 00000000
NIP [c0a04110] topology_init+0x8c/0x138
LR [c0a040d8] topology_init+0x54/0x138
Call Trace:
[e100de60] [80808080] 0x80808080 (unreliable)
[e100de90] [c0006bd4] do_one_initcall+0x48/0x1bc
[e100def0] [c0a0150c] kernel_init_freeable+0x1c8/0x278
[e100df20] [c0006f44] kernel_init+0x14/0x10c
[e100df30] [c00190fc] ret_from_kernel_thread+0x14/0x1c
Instruction dump:
7c692e70 7d290194 7c035040 7c7f1b78 5529103a 546706fe 5468103a 39400001
7c641b78 40800054 80c690b4 7fb9402e <81060034> 7fbeea14 2c080000 7fa3eb78
---[ end trace b246ffbc6bbbb6fb ]---
Fix it by checking smp_ops before using it, as already done in
several other places in the arch/powerpc/kernel/smp.c
Fixes: 39f87561454d ("powerpc/smp: Move ppc_md.cpu_die() to smp_ops.cpu_offline_self()")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/75287841cbb8740edd44880fe60be66d489160d9.1628097995.git.christophe.leroy@csgroup.eu
|
|
32 bits BOOKE have special interrupts for debug and other
critical events.
When handling those interrupts, dedicated registers are saved
in the stack frame in addition to the standard registers, leading
to a shift of the pt_regs struct.
Since commit db297c3b07af ("powerpc/32: Don't save thread.regs on
interrupt entry"), the pt_regs struct is expected to be at the
same place all the time.
Instead of handling a special struct in addition to pt_regs, just
add those special registers to struct pt_regs.
Fixes: db297c3b07af ("powerpc/32: Don't save thread.regs on interrupt entry")
Cc: stable@vger.kernel.org
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/028d5483b4851b01ea4334d0751e7f260419092b.1625637264.git.christophe.leroy@csgroup.eu
|
|
When a DSI (Data Storage Interrupt) is taken while in NAP mode,
r11 doesn't survive the call to power_save_ppc32_restore().
So use r1 instead of r11 as they both contain the virtual stack
pointer at that point.
Fixes: 4c0104a83fc3 ("powerpc/32: Dismantle EXC_XFER_STD/LITE/TEMPLATE")
Cc: stable@vger.kernel.org # v5.13+
Reported-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/731694e0885271f6ee9ffc179eb4bcee78313682.1628003562.git.christophe.leroy@csgroup.eu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Lots of small fixes for Arm SoCs this time, nothing too worrying:
- omap/beaglebone boot regression fix in gpt12 timer
- revert for i.mx8 soc driver breaking as a platform_driver
- kexec/kdump fixes for op-tee
- various fixes for incorrect DT settings on imx, mvebu, omap, stm32,
and tegra causing problems.
- device tree fixes for static checks in nomadik, versatile, stm32
- code fixes for issues found in build testing and with static
checking on tegra, ixp4xx, imx, omap"
* tag 'soc-fixes-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
soc: ixp4xx/qmgr: fix invalid __iomem access
soc: ixp4xx: fix printing resources
ARM: ixp4xx: goramo_mlr depends on old PCI driver
ARM: ixp4xx: fix compile-testing soc drivers
soc/tegra: Make regulator couplers depend on CONFIG_REGULATOR
ARM: dts: nomadik: Fix up interrupt controller node names
ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM
ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM
ARM: dts: stm32: Prefer HW RTC on DHCOM SoM
omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
ARM: dts: am437x-l4: fix typo in can@0 node
ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
bus: ti-sysc: AM3: RNG is GP only
ARM: omap2+: hwmod: fix potential NULL pointer access
arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode
arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers
ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins
ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init
ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz
arm64: dts: ls1028: sl28: fix networking for variant 2
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"It's all pretty minor but the main fix is sorting out how we deal with
return values from 32-bit system calls as audit expects error codes to
be sign-extended to 64 bits
Summary:
- Fix extension/truncation of return values from 32-bit system calls
- Fix interaction between unwinding and tracing
- Fix spurious toolchain warning emitted during make
- Fix Kconfig help text for RANDOMIZE_MODULE_REGION_FULL"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: stacktrace: avoid tracing arch_stack_walk()
arm64: stacktrace: fix comment
arm64: fix the doc of RANDOMIZE_MODULE_REGION_FULL
arm64: move warning about toolchains to archprepare
arm64: fix compat syscall return truncation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Fix PMD accounting change"
* tag 'mips-fixes_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: check return value of pgtable_pmd_page_ctor
|
|
A warning as below may be occasionally triggered in an ADL machine when
these conditions occur:
- Two perf record commands run one by one. Both record a PEBS event.
- Both runs on small cores.
- They have different adaptive PEBS configuration (PEBS_DATA_CFG).
[ ] WARNING: CPU: 4 PID: 9874 at arch/x86/events/intel/ds.c:1743 setup_pebs_adaptive_sample_data+0x55e/0x5b0
[ ] RIP: 0010:setup_pebs_adaptive_sample_data+0x55e/0x5b0
[ ] Call Trace:
[ ] <NMI>
[ ] intel_pmu_drain_pebs_icl+0x48b/0x810
[ ] perf_event_nmi_handler+0x41/0x80
[ ] </NMI>
[ ] __perf_event_task_sched_in+0x2c2/0x3a0
Different from the big core, the small core requires the ACK right
before re-enabling counters in the NMI handler, otherwise a stale PEBS
record may be dumped into the later NMI handler, which trigger the
warning.
Add a new mid_ack flag to track the case. Add all PMI handler bits in
the struct x86_hybrid_pmu to track the bits for different types of
PMUs. Apply mid ACK for the small cores on an Alder Lake machine.
The existing hybrid() macro has a compile error when taking address of
a bit-field variable. Add a new macro hybrid_bit() to get the
bit-field value of a given PMU.
Fixes: f83d2f91d259 ("perf/x86/intel: Add Alder Lake Hybrid support")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Link: https://lkml.kernel.org/r/1627997128-57891-1-git-send-email-kan.liang@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- fix zstd build for -march=z900 (undefined reference to __clzdi2)
- add missing .got.plts to vdso linker scripts to fix kpatch build
errors
- update defconfigs
* tag 's390-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/boot: fix zstd build for -march=z900
s390/vdso: add .got.plt in vdso linker script
|
|
Pull kvm fixes from Paolo Bonzini:
"Mostly bugfixes; plus, support for XMM arguments to Hyper-V hypercalls
now obeys KVM_CAP_HYPERV_ENFORCE_CPUID.
Both the XMM arguments feature and KVM_CAP_HYPERV_ENFORCE_CPUID are
new in 5.14, and each did not know of the other"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Fix per-cpu counter corruption on 32-bit builds
KVM: selftests: fix hyperv_clock test
KVM: SVM: improve the code readability for ASID management
KVM: SVM: Fix off-by-one indexing when nullifying last used SEV VMCB
KVM: Do not leak memory for duplicate debugfs directories
KVM: selftests: Test access to XMM fast hypercalls
KVM: x86: hyper-v: Check if guest is allowed to use XMM registers for hypercall input
KVM: x86: Introduce trace_kvm_hv_hypercall_done()
KVM: x86: hyper-v: Check access to hypercall before reading XMM registers
KVM: x86: accept userspace interrupt only if no event is injected
|
|
When cross compiling a MIPS kernel on a BSD based HOSTCC leads
to errors like
SYNC include/config/auto.conf.cmd - due to: .config
egrep: empty (sub)expression
UPD include/config/kernel.release
HOSTCC scripts/dtc/dtc.o - due to target missing
It turns out that egrep uses this egrep pattern:
(|MINOR_|PATCHLEVEL_)
This is not valid syntax or gives undefined results according
to POSIX 9.5.3 ERE Grammar
https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html
It seems to be silently accepted by the Linux egrep implementation
while a BSD host complains.
Such patterns can be replaced by a transformation like
"(|p1|p2)" -> "(p1|p2)?"
Fixes: 48c35b2d245f ("[MIPS] There is no __GNUC_MAJOR__")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Trying to run a cross-compiled x86 relocs tool on a BSD based
HOSTCC leads to errors like
VOFFSET arch/x86/boot/compressed/../voffset.h - due to: vmlinux
CC arch/x86/boot/compressed/misc.o - due to: arch/x86/boot/compressed/../voffset.h
OBJCOPY arch/x86/boot/compressed/vmlinux.bin - due to: vmlinux
RELOCS arch/x86/boot/compressed/vmlinux.relocs - due to: vmlinux
empty (sub)expressionarch/x86/boot/compressed/Makefile:118: recipe for target 'arch/x86/boot/compressed/vmlinux.relocs' failed
make[3]: *** [arch/x86/boot/compressed/vmlinux.relocs] Error 1
It turns out that relocs.c uses patterns like
"something(|_end)"
This is not valid syntax or gives undefined results according
to POSIX 9.5.3 ERE Grammar
https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html
It seems to be silently accepted by the Linux regexp() implementation
while a BSD host complains.
Such patterns can be replaced by a transformation like
"(|p1|p2)" -> "(p1|p2)?"
Fixes: fd952815307f ("x86-32, relocs: Whitelist more symbols for ld bug workaround")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
+. According to Documentation/vm/split_page_table_lock, handle failure
of pgtable_pmd_page_ctor
+. Use GFP_KERNEL_ACCOUNT instead of GFP_KERNEL|__GFP_ACCOUNT
+. Adjust coding style
Fixes: ed914d48b6a1 ("MIPS: add PMD table accounting into MIPS')
Reported-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Reviewed-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Take a signed 'long' instead of an 'unsigned long' for the number of
pages to add/subtract to the total number of pages used by the MMU. This
fixes a zero-extension bug on 32-bit kernels that effectively corrupts
the per-cpu counter used by the shrinker.
Per-cpu counters take a signed 64-bit value on both 32-bit and 64-bit
kernels, whereas kvm_mod_used_mmu_pages() takes an unsigned long and thus
an unsigned 32-bit value on 32-bit kernels. As a result, the value used
to adjust the per-cpu counter is zero-extended (unsigned -> signed), not
sign-extended (signed -> signed), and so KVM's intended -1 gets morphed to
4294967295 and effectively corrupts the counter.
This was found by a staggering amount of sheer dumb luck when running
kvm-unit-tests on a 32-bit KVM build. The shrinker just happened to kick
in while running tests and do_shrink_slab() logged an error about trying
to free a negative number of objects. The truly lucky part is that the
kernel just happened to be a slightly stale build, as the shrinker no
longer yells about negative objects as of commit 18bb473e5031 ("mm:
vmscan: shrink deferred objects proportional to priority").
vmscan: shrink_slab: mmu_shrink_scan+0x0/0x210 [kvm] negative objects to delete nr=-858993460
Fixes: bc8a3d8925a8 ("kvm: mmu: Fix overflow on kvm mmu page limit calculation")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210804214609.1096003-1-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM SEV code uses bitmaps to manage ASID states. ASID 0 was always skipped
because it is never used by VM. Thus, in existing code, ASID value and its
bitmap postion always has an 'offset-by-1' relationship.
Both SEV and SEV-ES shares the ASID space, thus KVM uses a dynamic range
[min_asid, max_asid] to handle SEV and SEV-ES ASIDs separately.
Existing code mixes the usage of ASID value and its bitmap position by
using the same variable called 'min_asid'.
Fix the min_asid usage: ensure that its usage is consistent with its name;
allocate extra size for ASID 0 to ensure that each ASID has the same value
with its bitmap position. Add comments on ASID bitmap allocation to clarify
the size change.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Marc Orr <marcorr@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Alper Gun <alpergun@google.com>
Cc: Dionna Glaze <dionnaglaze@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vipin Sharma <vipinsh@google.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Message-Id: <20210802180903.159381-1-mizhang@google.com>
[Fix up sev_asid_free to also index by ASID, as suggested by Sean
Christopherson, and use nr_asids in sev_cpu_init. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If we use "perf record" in an AMD Milan guest, dmesg reports a #GP
warning from an unchecked MSR access error on MSR_F15H_PERF_CTLx:
[] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000110076) at rIP: 0xffffffff8106ddb4 (native_write_msr+0x4/0x20)
[] Call Trace:
[] amd_pmu_disable_event+0x22/0x90
[] x86_pmu_stop+0x4c/0xa0
[] x86_pmu_del+0x3a/0x140
The AMD64_EVENTSEL_HOSTONLY bit is defined and used on the host,
while the guest perf driver should avoid such use.
Fixes: 1018faa6cf23 ("perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled")
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Link: https://lkml.kernel.org/r/20210802070850.35295-1-likexu@tencent.com
|
|
On Wed, Jul 28, 2021 at 12:49:43PM -0400, Vince Weaver wrote:
> [32694.087403] unchecked MSR access error: WRMSR to 0x318 (tried to write 0x0000000000000000) at rIP: 0xffffffff8106f854 (native_write_msr+0x4/0x20)
> [32694.101374] Call Trace:
> [32694.103974] perf_clear_dirty_counters+0x86/0x100
The problem being that it doesn't filter out all fake counters, in
specific the above (erroneously) tries to use FIXED_BTS. Limit the
fixed counters indexes to the hardware supplied number.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Like Xu <likexu@tencent.com>
Link: https://lkml.kernel.org/r/YQJxka3dxgdIdebG@hirez.programming.kicks-ass.net
|
