| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 6.4-rc7
Need this to pull in the msm work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. 14 are cc:stable and the remainder address issues which
were introduced during this development cycle or which were considered
inappropriate for a backport"
* tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
zswap: do not shrink if cgroup may not zswap
page cache: fix page_cache_next/prev_miss off by one
ocfs2: check new file size on fallocate call
mailmap: add entry for John Keeping
mm/damon/core: fix divide error in damon_nr_accesses_to_accesses_bp()
epoll: ep_autoremove_wake_function should use list_del_init_careful
mm/gup_test: fix ioctl fail for compat task
nilfs2: reject devices with insufficient block count
ocfs2: fix use-after-free when unmounting read-only filesystem
lib/test_vmalloc.c: avoid garbage in page array
nilfs2: fix possible out-of-bounds segment allocation in resize ioctl
riscv/purgatory: remove PGO flags
powerpc/purgatory: remove PGO flags
x86/purgatory: remove PGO flags
kexec: support purgatories with .text.hot sections
mm/uffd: allow vma to merge as much as possible
mm/uffd: fix vma operation where start addr cuts part of vma
radix-tree: move declarations to header
nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key()
|
|
If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections. This is not supported by kexec and crashes the
system.
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-2-b05c520b7296@chromium.org
Fixes: 930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Set up the kernel CS earlier in the boot process in case EFI boots
the kernel after bypassing the decompressor and the CS descriptor
used ends up being the EFI one which is not mapped in the identity
page table, leading to early SEV/SNP guest communication exceptions
resulting in the guest crashing
* tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/head/64: Switch to KERNEL_CS as soon as new GDT is installed
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Address some fallout of the locking rework, this time affecting the
way the vgic is configured
- Fix an issue where the page table walker frees a subtree and then
proceeds with walking what it has just freed...
- Check that a given PA donated to the guest is actually memory (only
affecting pKVM)
- Correctly handle MTE CMOs by Set/Way
- Fix the reported address of a watchpoint forwarded to userspace
- Fix the freeing of the root of stage-2 page tables
- Stop creating spurious PMU events to perform detection of the
default PMU and use the existing PMU list instead
x86:
- Fix a memslot lookup bug in the NX recovery thread that could
theoretically let userspace bypass the NX hugepage mitigation
- Fix a s/BLOCKING/PENDING bug in SVM's vNMI support
- Account exit stats for fastpath VM-Exits that never leave the super
tight run-loop
- Fix an out-of-bounds bug in the optimized APIC map code, and add a
regression test for the race"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Add test for race in kvm_recalculate_apic_map()
KVM: x86: Bail from kvm_recalculate_phys_map() if x2APIC ID is out-of-bounds
KVM: x86: Account fastpath-only VM-Exits in vCPU stats
KVM: SVM: vNMI pending bit is V_NMI_PENDING_MASK not V_NMI_BLOCKING_MASK
KVM: x86/mmu: Grab memslot for correct address space in NX recovery worker
KVM: arm64: Document default vPMU behavior on heterogeneous systems
KVM: arm64: Iterate arm_pmus list to probe for default PMU
KVM: arm64: Drop last page ref in kvm_pgtable_stage2_free_removed()
KVM: arm64: Populate fault info for watchpoint
KVM: arm64: Reload PTE after invoking walker callback on preorder traversal
KVM: arm64: Handle trap of tagged Set/Way CMOs
arm64: Add missing Set/Way CMO encodings
KVM: arm64: Prevent unconditional donation of unmapped regions from the host
KVM: arm64: vgic: Fix a comment
KVM: arm64: vgic: Fix locking comment
KVM: arm64: vgic: Wrap vgic_its_create() with config_lock
KVM: arm64: vgic: Fix a circular locking issue
|
|
Bail from kvm_recalculate_phys_map() and disable the optimized map if the
target vCPU's x2APIC ID is out-of-bounds, i.e. if the vCPU was added
and/or enabled its local APIC after the map was allocated. This fixes an
out-of-bounds access bug in the !x2apic_format path where KVM would write
beyond the end of phys_map.
Check the x2APIC ID regardless of whether or not x2APIC is enabled,
as KVM's hardcodes x2APIC ID to be the vCPU ID, i.e. it can't change, and
the map allocation in kvm_recalculate_apic_map() doesn't check for x2APIC
being enabled, i.e. the check won't get false postivies.
Note, this also affects the x2apic_format path, which previously just
ignored the "x2apic_id > new->max_apic_id" case. That too is arguably a
bug fix, as ignoring the vCPU meant that KVM would not send interrupts to
the vCPU until the next map recalculation. In practice, that "bug" is
likely benign as a newly present vCPU/APIC would immediately trigger a
recalc. But, there's no functional downside to disabling the map, and
a future patch will gracefully handle the -E2BIG case by retrying instead
of simply disabling the optimized map.
Opportunistically add a sanity check on the xAPIC ID size, along with a
comment explaining why the xAPIC ID is guaranteed to be "good".
Reported-by: Michal Luczaj <mhal@rbox.co>
Fixes: 5b84b0291702 ("KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230602233250.1014316-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The call to startup_64_setup_env() will install a new GDT but does not
actually switch to using the KERNEL_CS entry until returning from the
function call.
Commit bcce82908333 ("x86/sev: Detect/setup SEV/SME features earlier in
boot") moved the call to sme_enable() earlier in the boot process and in
between the call to startup_64_setup_env() and the switch to KERNEL_CS.
An SEV-ES or an SEV-SNP guest will trigger #VC exceptions during the call
to sme_enable() and if the CS pushed on the stack as part of the exception
and used by IRETQ is not mapped by the new GDT, then problems occur.
Today, the current CS when entering startup_64 is the kernel CS value
because it was set up by the decompressor code, so no issue is seen.
However, a recent patchset that looked to avoid using the legacy
decompressor during an EFI boot exposed this bug. At entry to startup_64,
the CS value is that of EFI and is not mapped in the new kernel GDT. So
when a #VC exception occurs, the CS value used by IRETQ is not valid and
the guest boot crashes.
Fix this issue by moving the block that switches to the KERNEL_CS value to
be done immediately after returning from startup_64_setup_env().
Fixes: bcce82908333 ("x86/sev: Detect/setup SEV/SME features earlier in boot")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/all/6ff1f28af2829cc9aea357ebee285825f90a431f.1684340801.git.thomas.lendacky%40amd.com
|
|
Increment vcpu->stat.exits when handling a fastpath VM-Exit without
going through any part of the "slow" path. Not bumping the exits stat
can result in wildly misleading exit counts, e.g. if the primary reason
the guest is exiting is to program the TSC deadline timer.
Fixes: 404d5d7bff0d ("KVM: X86: Introduce more exit_fastpath_completion enum values")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230602011920.787844-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
While testing Hyper-V enabled Windows Server 2019 guests on Zen4 hardware
I noticed that with vCPU count large enough (> 16) they sometimes froze at
boot.
With vCPU count of 64 they never booted successfully - suggesting some kind
of a race condition.
Since adding "vnmi=0" module parameter made these guests boot successfully
it was clear that the problem is most likely (v)NMI-related.
Running kvm-unit-tests quickly showed failing NMI-related tests cases, like
"multiple nmi" and "pending nmi" from apic-split, x2apic and xapic tests
and the NMI parts of eventinj test.
The issue was that once one NMI was being serviced no other NMI was allowed
to be set pending (NMI limit = 0), which was traced to
svm_is_vnmi_pending() wrongly testing for the "NMI blocked" flag rather
than for the "NMI pending" flag.
Fix this by testing for the right flag in svm_is_vnmi_pending().
Once this is done, the NMI-related kvm-unit-tests pass successfully and
the Windows guest no longer freezes at boot.
Fixes: fa4c027a7956 ("KVM: x86: Add support for SVM's Virtual NMI")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/be4ca192eb0c1e69a210db3009ca984e6a54ae69.1684495380.git.maciej.szmigiero@oracle.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Factor in the address space (non-SMM vs. SMM) of the target shadow page
when recovering potential NX huge pages, otherwise KVM will retrieve the
wrong memslot when zapping shadow pages that were created for SMM. The
bug most visibly manifests as a WARN on the memslot being non-NULL, but
the worst case scenario is that KVM could unaccount the shadow page
without ensuring KVM won't install a huge page, i.e. if the non-SMM slot
is being dirty logged, but the SMM slot is not.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 3911 at arch/x86/kvm/mmu/mmu.c:7015
kvm_nx_huge_page_recovery_worker+0x38c/0x3d0 [kvm]
CPU: 1 PID: 3911 Comm: kvm-nx-lpage-re
RIP: 0010:kvm_nx_huge_page_recovery_worker+0x38c/0x3d0 [kvm]
RSP: 0018:ffff99b284f0be68 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff99b284edd000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff9271397024e0 R08: 0000000000000000 R09: ffff927139702450
R10: 0000000000000000 R11: 0000000000000001 R12: ffff99b284f0be98
R13: 0000000000000000 R14: ffff9270991fcd80 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff927f9f640000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0aacad3ae0 CR3: 000000088fc2c005 CR4: 00000000003726e0
Call Trace:
<TASK>
__pfx_kvm_nx_huge_page_recovery_worker+0x10/0x10 [kvm]
kvm_vm_worker_thread+0x106/0x1c0 [kvm]
kthread+0xd9/0x100
ret_from_fork+0x2c/0x50
</TASK>
---[ end trace 0000000000000000 ]---
This bug was exposed by commit edbdb43fc96b ("KVM: x86: Preserve TDP MMU
roots until they are explicitly invalidated"), which allowed KVM to retain
SMM TDP MMU roots effectively indefinitely. Before commit edbdb43fc96b,
KVM would zap all SMM TDP MMU roots and thus all SMM TDP MMU shadow pages
once all vCPUs exited SMM, which made the window where this bug (recovering
an SMM NX huge page) could be encountered quite tiny. To hit the bug, the
NX recovery thread would have to run while at least one vCPU was in SMM.
Most VMs typically only use SMM during boot, and so the problematic shadow
pages were gone by the time the NX recovery thread ran.
Now that KVM preserves TDP MMU roots until they are explicitly invalidated
(e.g. by a memslot deletion), the window to trigger the bug is effectively
never closed because most VMMs don't delete memslots after boot (except
for a handful of special scenarios).
Fixes: eb298605705a ("KVM: x86/mmu: Do not recover dirty-tracked NX Huge Pages")
Reported-by: Fabio Coatti <fabio.coatti@gmail.com>
Closes: https://lore.kernel.org/all/CADpTngX9LESCdHVu_2mQkNGena_Ng2CphWNwsRGSMxzDsTjU2A@mail.gmail.com
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230602010137.784664-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When switching from kthreads to vhost_tasks two bugs were added:
1. The vhost worker tasks's now show up as processes so scripts doing
ps or ps a would not incorrectly detect the vhost task as another
process. 2. kthreads disabled freeze by setting PF_NOFREEZE, but
vhost tasks's didn't disable or add support for them.
To fix both bugs, this switches the vhost task to be thread in the
process that does the VHOST_SET_OWNER ioctl, and has vhost_worker call
get_signal to support SIGKILL/SIGSTOP and freeze signals. Note that
SIGKILL/STOP support is required because CLONE_THREAD requires
CLONE_SIGHAND which requires those 2 signals to be supported.
This is a modified version of the patch written by Mike Christie
<michael.christie@oracle.com> which was a modified version of patch
originally written by Linus.
Much of what depended upon PF_IO_WORKER now depends on PF_USER_WORKER.
Including ignoring signals, setting up the register state, and having
get_signal return instead of calling do_group_exit.
Tidied up the vhost_task abstraction so that the definition of
vhost_task only needs to be visible inside of vhost_task.c. Making
it easier to review the code and tell what needs to be done where.
As part of this the main loop has been moved from vhost_worker into
vhost_task_fn. vhost_worker now returns true if work was done.
The main loop has been updated to call get_signal which handles
SIGSTOP, freezing, and collects the message that tells the thread to
exit as part of process exit. This collection clears
__fatal_signal_pending. This collection is not guaranteed to
clear signal_pending() so clear that explicitly so the schedule()
sleeps.
For now the vhost thread continues to exist and run work until the
last file descriptor is closed and the release function is called as
part of freeing struct file. To avoid hangs in the coredump
rendezvous and when killing threads in a multi-threaded exec. The
coredump code and de_thread have been modified to ignore vhost threads.
Remvoing the special case for exec appears to require teaching
vhost_dev_flush how to directly complete transactions in case
the vhost thread is no longer running.
Removing the special case for coredump rendezvous requires either the
above fix needed for exec or moving the coredump rendezvous into
get_signal.
Fixes: 6e890c5d5021 ("vhost: use vhost_tasks for worker threads")
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Co-developed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix an alignment crash in x86/aria"
* tag 'v6.4-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/aria - Use 16 byte alignment for GFNI constant vectors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu fix from Thomas Gleixner:
"A single fix for x86:
- Prevent a bogus setting for the number of HT siblings, which is
caused by the CPUID evaluation trainwreck of X86. That recomputes
the value for each CPU, so the last CPU "wins". That can cause
completely bogus sibling values"
* tag 'x86-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platforms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A small set of perf fixes:
- Make the MSR-readout based CHA discovery work around broken
discovery tables in some SPR firmwares.
- Prevent saving PEBS configuration which has software bits set that
cause a crash when restored into the relevant MSR"
* tag 'perf-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Correct the number of CHAs on SPR
perf/x86/intel: Save/restore cpuc->active_pebs_data_cfg when using guest PEBS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull unwinder fixes from Thomas Gleixner:
"A set of unwinder and tooling fixes:
- Ensure that the stack pointer on x86 is aligned again so that the
unwinder does not read past the end of the stack
- Discard .note.gnu.property section which has a pointlessly
different alignment than the other note sections. That confuses
tooling of all sorts including readelf, libbpf and pahole"
* tag 'objtool-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/show_trace_log_lvl: Ensure stack pointer is aligned, again
vmlinux.lds.h: Discard .note.gnu.property section
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a double free fix in the Xen pvcalls backend driver
- a fix for a regression causing the MSI related sysfs entries to not
being created in Xen PV guests
- a fix in the Xen blkfront driver for handling insane input data
better
* tag 'for-linus-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/pci/xen: populate MSI sysfs entries
xen/pvcalls-back: fix double frees with pvcalls_new_active_socket()
xen/blkfront: Only check REQ_FUA for writes
|
|
I tried to streamline our user memory copy code fairly aggressively in
commit adfcf4231b8c ("x86: don't use REP_GOOD or ERMS for user memory
copies"), in order to then be able to clean up the code and inline the
modern FSRM case in commit 577e6a7fd50d ("x86: inline the 'rep movs' in
user copies for the FSRM case").
We had reports [1] of that causing regressions earlier with blogbench,
but that turned out to be a horrible benchmark for that case, and not a
sufficient reason for re-instating "rep movsb" on older machines.
However, now Eric Dumazet reported [2] a regression in performance that
seems to be a rather more real benchmark, where due to the removal of
"rep movs" a TCP stream over a 100Gbps network no longer reaches line
speed.
And it turns out that with the simplified the calling convention for the
non-FSRM case in commit 427fda2c8a49 ("x86: improve on the non-rep
'copy_user' function"), re-introducing the ERMS case is actually fairly
simple.
Of course, that "fairly simple" is glossing over several missteps due to
having to fight our assembler alternative code. This code really wanted
to rewrite a conditional branch to have two different targets, but that
made objtool sufficiently unhappy that this instead just ended up doing
a choice between "jump to the unrolled loop, or use 'rep movsb'
directly".
Let's see if somebody finds a case where the kernel memory copies also
care (see commit 68674f94ffc9: "x86: don't use REP_GOOD or ERMS for
small memory copies"). But Eric does argue that the user copies are
special because networking tries to copy up to 32KB at a time, if
order-3 pages allocations are possible.
In-kernel memory copies are typically small, unless they are the special
"copy pages at a time" kind that still use "rep movs".
Link: https://lore.kernel.org/lkml/202305041446.71d46724-yujie.liu@intel.com/ [1]
Link: https://lore.kernel.org/lkml/CANn89iKUbyrJ=r2+_kK+sb2ZSSHifFZ7QkPLDpAtkJ8v4WUumA@mail.gmail.com/ [2]
Reported-and-tested-by: Eric Dumazet <edumazet@google.com>
Fixes: adfcf4231b8c ("x86: don't use REP_GOOD or ERMS for user memory copies")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.5:
UAPI Changes:
Cross-subsystem Changes:
* fbdev: Move framebuffer I/O helpers to <asm/fb.h>, fix naming
* firmware: Init sysfb as early as possible
Core Changes:
* DRM scheduler: Rename interfaces
* ttm: Store ttm_device_funcs in .rodata
* Replace strlcpy() with strscpy() in various places
* Cleanups
Driver Changes:
* bridge: analogix: Fix endless probe loop; samsung-dsim: Support
swapping clock/data polarity; tc358767: Use devm_ Cleanups;
* gma500: Fix I/O-memory access
* panel: boe-tv101wum-nl6: Improve initialization; sharp-ls043t1le001:
Mode fixes; simple: Add BOE EV121WXM-N10-1850 plus DT bindings;
AddS6D7AA0 plus DT bindings; Cleanups
* ssd1307x: Style fixes
* sun4i: Release clocks
* msm: Fix I/O-memory access
* nouveau: Cleanups
* shmobile: Support Renesas; Enable framebuffer console; Various fixes
* vkms: Fix RGB565 conversion
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmRuBXEACgkQaA3BHVML
# eiPLkwgAqCa7IuSDQhFMWVOI0EJpPPEHtHM8SCT1Pp8aniXk23Ru+E16c5zck53O
# uf4tB+zoFrwD9npy60LIvX1OZmXS1KI4+ZO8itYFk6GSjxqbTWbjNFREBeWFdIpa
# OG54nEqjFQZzEXY+gJYDpu5zqLy3xLN07ZgQkcMyfW3O/Krj4LLzfQTDl+jP5wkO
# 7/v5Eu5CG5QjupMxIjb4e+ruUflp73pynur5bhZsfS1bPNGFTnxHlwg7NWnBXU7o
# Hg23UYfCuZZWPmuO26EeUDlN33rCoaycmVgtpdZft2eznca5Mg74Loz1Qc3GQfjw
# LLvKsAIlBcZvEIhElkzhtXitBoe7LQ==
# =/9zV
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 May 2023 22:39:13 AEST
# gpg: using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
# Conflicts:
# MAINTAINERS
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524124237.GA25416@linux-uq9g
|
|
Traditionally, all CPUs in a system have identical numbers of SMT
siblings. That changes with hybrid processors where some logical CPUs
have a sibling and others have none.
Today, the CPU boot code sets the global variable smp_num_siblings when
every CPU thread is brought up. The last thread to boot will overwrite
it with the number of siblings of *that* thread. That last thread to
boot will "win". If the thread is a Pcore, smp_num_siblings == 2. If it
is an Ecore, smp_num_siblings == 1.
smp_num_siblings describes if the *system* supports SMT. It should
specify the maximum number of SMT threads among all cores.
Ensure that smp_num_siblings represents the system-wide maximum number
of siblings by always increasing its value. Never allow it to decrease.
On MeteorLake-P platform, this fixes a problem that the Ecore CPUs are
not updated in any cpu sibling map because the system is treated as an
UP system when probing Ecore CPUs.
Below shows part of the CPU topology information before and after the
fix, for both Pcore and Ecore CPU (cpu0 is Pcore, cpu 12 is Ecore).
...
-/sys/devices/system/cpu/cpu0/topology/package_cpus:000fff
-/sys/devices/system/cpu/cpu0/topology/package_cpus_list:0-11
+/sys/devices/system/cpu/cpu0/topology/package_cpus:3fffff
+/sys/devices/system/cpu/cpu0/topology/package_cpus_list:0-21
...
-/sys/devices/system/cpu/cpu12/topology/package_cpus:001000
-/sys/devices/system/cpu/cpu12/topology/package_cpus_list:12
+/sys/devices/system/cpu/cpu12/topology/package_cpus:3fffff
+/sys/devices/system/cpu/cpu12/topology/package_cpus_list:0-21
Notice that the "before" 'package_cpus_list' has only one CPU. This
means that userspace tools like lscpu will see a little laptop like
an 11-socket system:
-Core(s) per socket: 1
-Socket(s): 11
+Core(s) per socket: 16
+Socket(s): 1
This is also expected to make the scheduler do rather wonky things
too.
[ dhansen: remove CPUID detail from changelog, add end user effects ]
CC: stable@kernel.org
Fixes: bbb65d2d365e ("x86: use cpuid vector 0xb when available for detecting cpu topology")
Fixes: 95f3d39ccf7a ("x86/cpu/topology: Provide detect_extended_topology_early()")
Suggested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20230323015640.27906-1-rui.zhang%40intel.com
|
|
The number of CHAs from the discovery table on some SPR variants is
incorrect, because of a firmware issue. An accurate number can be read
from the MSR UNC_CBO_CONFIG.
Fixes: 949b11381f81 ("perf/x86/intel/uncore: Add Sapphire Rapids server CHA support")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230508140206.283708-1-kan.liang@linux.intel.com
|
|
Commit bf5e758f02fc ("genirq/msi: Simplify sysfs handling") reworked the
creation of sysfs entries for MSI IRQs. The creation used to be in
msi_domain_alloc_irqs_descs_locked after calling ops->domain_alloc_irqs.
Then it moved into __msi_domain_alloc_irqs which is an implementation of
domain_alloc_irqs. However, Xen comes with the only other implementation
of domain_alloc_irqs and hence doesn't run the sysfs population code
anymore.
Commit 6c796996ee70 ("x86/pci/xen: Fixup fallout from the PCI/MSI
overhaul") set the flag MSI_FLAG_DEV_SYSFS for the xen msi_domain_info
but that doesn't actually have an effect because Xen uses it's own
domain_alloc_irqs implementation.
Fix this by making use of the fallback functions for sysfs population.
Fixes: bf5e758f02fc ("genirq/msi: Simplify sysfs handling")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230503131656.15928-1-mheyne@amazon.de
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The GFNI routines in the AVX version of the ARIA implementation now use
explicit VMOVDQA instructions to load the constant input vectors, which
means they must be 16 byte aligned. So ensure that this is the case, by
dropping the section split and the incorrect .align 8 directive, and
emitting the constants into the 16-byte aligned section instead.
Note that the AVX2 version of this code deviates from this pattern, and
does not require a similar fix, given that it loads these contants as
8-byte memory operands, for which AVX2 permits any alignment.
Cc: Taehee Yoo <ap420073@gmail.com>
Fixes: 8b84475318641c2b ("crypto: x86/aria-avx - Do not use avx2 instructions")
Reported-by: syzbot+a6abcf08bad8b18fd198@syzkaller.appspotmail.com
Tested-by: syzbot+a6abcf08bad8b18fd198@syzkaller.appspotmail.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
After commit b752ea0c28e3 ("perf/x86/intel/ds: Flush PEBS DS when changing
PEBS_DATA_CFG"), the cpuc->pebs_data_cfg may save some bits that are not
supported by real hardware, such as PEBS_UPDATE_DS_SW. This would cause
the VMX hardware MSR switching mechanism to save/restore invalid values
for PEBS_DATA_CFG MSR, thus crashing the host when PEBS is used for guest.
Fix it by using the active host value from cpuc->active_pebs_data_cfg.
Fixes: b752ea0c28e3 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG")
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230517133808.67885-1-likexu@tencent.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Dave Hansen:
"This works around and issue where the INVLPG instruction may miss
invalidating kernel TLB entries in recent hybrid CPUs.
I do expect an eventual microcode fix for this. When the microcode
version numbers are known, we can circle back around and add them the
model table to disable this workaround"
* tag 'x86_urgent_for_6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Avoid incomplete Global INVLPG flushes
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Plug a race in the stage-2 mapping code where the IPA and the PA
would end up being out of sync
- Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...)
- FP/SVE/SME documentation update, in the hope that this field
becomes clearer...
- Add workaround for Apple SEIS brokenness to a new SoC
- Random comment fixes
x86:
- add MSR_IA32_TSX_CTRL into msrs_to_save
- fixes for XCR0 handling in SGX enclaves
Generic:
- Fix vcpu_array[0] races
- Fix race between starting a VM and 'reboot -f'"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save
KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM)
KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE
KVM: Fix vcpu_array[0] races
KVM: VMX: Fix header file dependency of asm/vmx.h
KVM: Don't enable hardware after a restart/shutdown is initiated
KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown
KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations
KVM: arm64: Clarify host SME state management
KVM: arm64: Restructure check for SVE support in FP trap handler
KVM: arm64: Document check for TIF_FOREIGN_FPSTATE
KVM: arm64: Fix repeated words in comments
KVM: arm64: Constify start/end/phys fields of the pgtable walker data
KVM: arm64: Infer PA offset from VA in hyp map walker
KVM: arm64: Infer the PA offset from IPA in stage-2 map walker
KVM: arm64: Use the bitmap API to allocate bitmaps
KVM: arm64: Slightly optimize flush_context()
|
|
Add MSR_IA32_TSX_CTRL into msrs_to_save[] to explicitly tell userspace to
save/restore the register value during migration. Missing this may cause
userspace that relies on KVM ioctl(KVM_GET_MSR_INDEX_LIST) fail to port the
value to the target VM.
In addition, there is no need to add MSR_IA32_TSX_CTRL when
ARCH_CAP_TSX_CTRL_MSR is not supported in kvm_get_arch_capabilities(). So
add the checking in kvm_probe_msr_to_save().
Fixes: c11f83e0626b ("KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality")
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20230509032348.1153070-1-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop KVM's manipulation of guest's CPUID.0x12.1 ECX and EDX, i.e. the
allowed XFRM of SGX enclaves, now that KVM explicitly checks the guest's
allowed XCR0 when emulating ECREATE.
Note, this could theoretically break a setup where userspace advertises
a "bad" XFRM and relies on KVM to provide a sane CPUID model, but QEMU
is the only known user of KVM SGX, and QEMU explicitly sets the SGX CPUID
XFRM subleaf based on the guest's XCR0.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly check the vCPU's supported XCR0 when determining whether or not
the XFRM for ECREATE is valid. Checking CPUID works because KVM updates
guest CPUID.0x12.1 to restrict the leaf to a subset of the guest's allowed
XCR0, but that is rather subtle and KVM should not modify guest CPUID
except for modeling true runtime behavior (allowed XFRM is most definitely
not "runtime" behavior).
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Include a definition of WARN_ON_ONCE() before using it.
Fixes: bb1fcc70d98f ("KVM: nVMX: Allow L1 to use 5-level page walks for nested EPT")
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jacob Xu <jacobhxu@google.com>
[reworded commit message; changed <asm/bug.h> to <linux/bug.h>]
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225012959.1554168-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.5:
UAPI Changes:
Cross-subsystem Changes:
- arch: Consolidate <asm/fb.h>
Core Changes:
- aperture: Ignore firmware framebuffers with non-primary devices
- fbdev: Use fbdev's I/O helpers
- sysfs: Expose DRM connector ID
- tests: More tests for drm_rect
Driver Changes:
- armada: Implement fbdev emulation as a client
- bridge:
- fsl-ldb: Support i.MX6SX
- lt9211: Remove blanking packets
- lt9611: Remove blanking packets
- tc358768: Implement input bus formats reporting, fix various
timings and clocks settings
- ti-sn65dsi86: Implement wait_hpd_asserted
- nouveau: Improve NULL pointer checks before dereference
- panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- new panels: InnoLux G070ACE-L01
- sun4i: Fix MIPI-DSI dotclock
- vc4: RGB Range toggle property, BT601 and BT2020 support for HDMI
- vkms: Convert to drmm helpers, Add reflection and rotation support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/2pxmxdzsk2ekjy6xvbpj67zrhtwvkkhfspuvdm5pfm5i54hed6@sooct7yq6z4w
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Initialize 'ret' local variables on fprobe_handler() to fix the
smatch warning. With this, fprobe function exit handler is not
working randomly.
- Fix to use preempt_enable/disable_notrace for rethook handler to
prevent recursive call of fprobe exit handler (which is based on
rethook)
- Fix recursive call issue on fprobe_kprobe_handler()
- Fix to detect recursive call on fprobe_exit_handler()
- Fix to make all arch-dependent rethook code notrace (the
arch-independent code is already notrace)"
* tag 'probes-fixes-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rethook, fprobe: do not trace rethook related functions
fprobe: add recursion detection in fprobe_exit_handler
fprobe: make fprobe_kprobe_handler recursion free
rethook: use preempt_{disable, enable}_notrace in rethook_trampoline_handler
tracing: fprobe: Initialize ret valiable to fix smatch error
|
|
Replace include statements for <asm/fb.h> with <linux/fb.h>. Fixes
the coding style: if a header is available in asm/ and linux/, it
is preferable to include the header from linux/. This only affects
a few source files, most of which already include <linux/fb.h>.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512102444.5438-6-tzimmermann@suse.de
|
|
These functions are already marked as NOKPROBE to prevent recursion and
we have the same reason to blacklist them if rethook is used with fprobe,
since they are beyond the recursion-free region ftrace can guard.
Link: https://lore.kernel.org/all/20230517034510.15639-5-zegao@tencent.com/
Fixes: f3a112c0c40d ("x86,rethook,kprobes: Replace kretprobe with rethook on x86")
Signed-off-by: Ze Gao <zegao@tencent.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
The INVLPG instruction is used to invalidate TLB entries for a
specified virtual address. When PCIDs are enabled, INVLPG is supposed
to invalidate TLB entries for the specified address for both the
current PCID *and* Global entries. (Note: Only kernel mappings set
Global=1.)
Unfortunately, some INVLPG implementations can leave Global
translations unflushed when PCIDs are enabled.
As a workaround, never enable PCIDs on affected processors.
I expect there to eventually be microcode mitigations to replace this
software workaround. However, the exact version numbers where that
will happen are not known today. Once the version numbers are set in
stone, the processor list can be tweaked to only disable PCIDs on
affected processors with affected microcode.
Note: if anyone wants a quick fix that doesn't require patching, just
stick 'nopcid' on your kernel command-line.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
|
|
The commit e335bb51cc15 ("x86/unwind: Ensure stack pointer is aligned")
tried to align the stack pointer in show_trace_log_lvl(), otherwise the
"stack < stack_info.end" check can't guarantee that the last read does
not go past the end of the stack.
However, we have the same problem with the initial value of the stack
pointer, it can also be unaligned. So without this patch this trivial
kernel module
#include <linux/module.h>
static int init(void)
{
asm volatile("sub $0x4,%rsp");
dump_stack();
asm volatile("add $0x4,%rsp");
return -EAGAIN;
}
module_init(init);
MODULE_LICENSE("GPL");
crashes the kernel.
Fixes: e335bb51cc15 ("x86/unwind: Ensure stack pointer is aligned")
Signed-off-by: Vernon Lovejoy <vlovejoy@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20230512104232.GA10227@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Make sure the PEBS buffer is flushed before reprogramming the
hardware so that the correct record sizes are used
- Update the sample size for AMD BRS events
- Fix a confusion with using the same on-stack struct with different
events in the event processing path
* tag 'perf_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG
perf/x86: Fix missing sample size update on AMD BRS
perf/core: Fix perf_sample_data not properly initialized for different swevents in perf_tp_event()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Add the required PCI IDs so that the generic SMN accesses provided by
amd_nb.c work for drivers which switch to them. Add a PCI device ID
to k10temp's table so that latter is loaded on such systems too
* tag 'x86_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hwmon: (k10temp) Add PCI ID for family 19, model 78h
x86/amd_nb: Add PCI ID for family 19h model 78h
|
|
SYM_FUNC_START_LOCAL_NOALIGN() adds an endbr leading to this layout
(leaving only the last 2 bytes of the address):
3bff <zen_untrain_ret>:
3bff: f3 0f 1e fa endbr64
3c03: f6 test $0xcc,%bl
3c04 <__x86_return_thunk>:
3c04: c3 ret
3c05: cc int3
3c06: 0f ae e8 lfence
However, "the RET at __x86_return_thunk must be on a 64 byte boundary,
for alignment within the BTB."
Use SYM_START instead.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Start the 6.5 release cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Commit
310e782a99c7 ("platform/x86/amd: pmc: Utilize SMN index 0 for driver probe")
switched to using amd_smn_read() which relies upon the misc PCI ID used
by DF function 3 being included in a table. The ID for model 78h is
missing in that table, so amd_smn_read() doesn't work.
Add the missing ID into amd_nb, restoring s2idle on this system.
[ bp: Simplify commit message. ]
Fixes: 310e782a99c7 ("platform/x86/amd: pmc: Utilize SMN index 0 for driver probe")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230427053338.16653-2-mario.limonciello@amd.com
|
|
Several similar kernel warnings can be triggered,
[56605.607840] CPU0 PEBS record size 0, expected 32, config 0 cpuc->record_size=208
when the below commands are running in parallel for a while on SPR.
while true;
do
perf record --no-buildid -a --intr-regs=AX \
-e cpu/event=0xd0,umask=0x81/pp \
-c 10003 -o /dev/null ./triad;
done &
while true;
do
perf record -o /tmp/out -W -d \
-e '{ld_blocks.store_forward:period=1000000, \
MEM_TRANS_RETIRED.LOAD_LATENCY:u:precise=2:ldlat=4}' \
-c 1037 ./triad;
done
The triad program is just the generation of loads/stores.
The warnings are triggered when an unexpected PEBS record (with a
different config and size) is found.
A system-wide PEBS event with the large PEBS config may be enabled
during a context switch. Some PEBS records for the system-wide PEBS
may be generated while the old task is sched out but the new one
hasn't been sched in yet. When the new task is sched in, the
cpuc->pebs_record_size may be updated for the per-task PEBS events. So
the existing system-wide PEBS records have a different size from the
later PEBS records.
The PEBS buffer should be flushed right before the hardware is
reprogrammed. The new size and threshold should be updated after the
old buffer has been flushed.
Reported-by: Stephane Eranian <eranian@google.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230421184529.3320912-1-kan.liang@linux.intel.com
|
|
It missed to convert a PERF_SAMPLE_BRANCH_STACK user to call the new
perf_sample_save_brstack() helper in order to update the dyn_size.
This affects AMD Zen3 machines with the branch-brs event.
Fixes: eb55b455ef9c ("perf/core: Add perf_sample_save_brstack() helper")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20230427030527.580841-1-namhyung@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
primitive, which will be used in perf events ring-buffer code
- Simplify/modify rwsems on PREEMPT_RT, to address writer starvation
- Misc cleanups/fixes
* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: Correct (cmp)xchg() instrumentation
locking/x86: Define arch_try_cmpxchg_local()
locking/arch: Wire up local_try_cmpxchg()
locking/generic: Wire up local{,64}_try_cmpxchg()
locking/atomic: Add generic try_cmpxchg{,64}_local() support
locking/rwbase: Mitigate indefinite writer starvation
locking/arch: Rename all internal __xchg() names to __arch_xchg()
|
|
Merge my x86 uaccess updates branch.
The LAM ("Linear Address Masking") updates in this release made me
unhappy about how "access_ok()" was done, and it actually turned out to
have a couple of small bugs in it too. This is my cleanup of the code:
- use the sign bit of the __user pointer rather than masking the
address and checking it against the TASK_SIZE range.
We already did this part for the get/put_user() side, but
'access_ok()' did the naïve "mask and range check" thing, which not
only generates nasty code, but also ended up meaning that __access_ok
itself didn't do a good job, and so copy_from_user_nmi() didn't get
the check right.
- move all the code that is 64-bit only into the 64-bit version of the
header file, so that we don't unnecessarily pollute the shared x86
code and make it look like LAM might work in 32-bit too.
- fix a bug in the address masking (that doesn't end up mattering: in
this case the fix was to just remove the buggy code entirely).
- a couple of trivial cleanups and added commentary about the
access_ok() rules.
* x86-uaccess-cleanup:
x86-64: mm: clarify the 'positive addresses' user address rules
x86: mm: remove 'sign' games from LAM untagged_addr*() macros
x86: uaccess: move 32-bit and 64-bit parts into proper <asm/uaccess_N.h> header
x86: mm: remove architecture-specific 'access_ok()' define
x86-64: make access_ok() independent of LAM
|
|
Fix a long-standing flaw in x86's TDP MMU where unloading roots on a vCPU can
result in the root being freed even though the root is completely valid and
can be reused as-is (with a TLB flush).
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull uml updates from Richard Weinberger:
- Make stub data pages configurable
- Make it harder to mix user and kernel code by accident
* tag 'uml-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: make stub data pages size tweakable
um: prevent user code in modules
um: further clean up user_syms
um: don't export printf()
um: hostfs: define our own API boundary
um: add __weak for exported functions
|
|
Dave Hansen found the "(long) addr >= 0" code in the x86-64 access_ok
checks somewhat confusing, and suggested using a helper to clarify what
the code is doing.
So this does exactly that: clarifying what the sign bit check is all
about, by adding a helper macro that makes it clear what it is testing.
This also adds some explicit comments talking about how even with LAM
enabled, any addresses with the sign bit will still GP-fault in the
non-canonical region just above the sign bit.
This is all what allows us to do the user address checks with just the
sign bit, and furthermore be a bit cavalier about accesses that might be
done with an additional offset even past that point.
(And yes, this talks about 'positive' even though zero is also a valid
user address and so technically we should call them 'non-negative'. But
I don't think using 'non-negative' ends up being more understandable).
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The intent of the sign games was to not modify kernel addresses when
untagging them. However, that had two issues:
(a) it didn't actually work as intended, since the mask was calculated
as 'addr >> 63' on an _unsigned_ address. So instead of getting a
mask of all ones for kernel addresses, you just got '1'.
(b) untagging a kernel address isn't actually a valid operation anyway.
Now, (a) had originally been true for both 'untagged_addr()' and the
remote version of it, but had accidentally been fixed for the regular
version of untagged_addr() by commit e0bddc19ba95 ("x86/mm: Reduce
untagged_addr() overhead for systems without LAM"). That one rewrote
the shift to be part of the alternative asm code, and in the process
changed the unsigned shift into a signed 'sar' instruction.
And while it is true that we don't want to turn what looks like a kernel
address into a user address by masking off the high bit, that doesn't
need these sign masking games - all it needs is that the mm context
'untag_mask' value has the high bit set.
Which it always does.
So simplify the code by just removing the superfluous (and in the case
of untagged_addr_remote(), still buggy) sign bit games in the address
masking.
Acked-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The x86 <asm/uaccess.h> file has grown features that are specific to
x86-64 like LAM support and the related access_ok() changes. They
really should be in the <asm/uaccess_64.h> file and not pollute the
generic x86 header.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There's already a generic definition of 'access_ok()' in the
asm-generic/access_ok.h header file, and the only difference bwteen that
and the x86-specific one is the added check for WARN_ON_IN_IRQ().
And it turns out that the reason for that check is long gone: it used to
use a "user_addr_max()" inline function that depended on the current
thread, and caused problems in non-thread contexts.
For details, see commits 7c4788950ba5 ("x86/uaccess, sched/preempt:
Verify access_ok() context") and in particular commit ae31fe51a3cc
("perf/x86: Restore TASK_SIZE check on frame pointer") about how and why
this came to be.
But that "current task" issue was removed in the big set_fs() removal by
Christoph Hellwig in commit 47058bb54b57 ("x86: remove address space
overrides using set_fs()").
So the reason for the test and the architecture-specific access_ok()
define no longer exists, and is actually harmful these days. For
example, it led various 'copy_from_user_nmi()' games (eg using
__range_not_ok() instead, and then later converted to __access_ok() when
that became ok).
And that in turn meant that LAM was broken for the frame following
before this series, because __access_ok() used to not do the address
untagging.
Accessing user state still needs care in many contexts, but access_ok()
is not the place for this test.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds torvalds@linux-foundation.org>
|
