summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/vm86_32.c
AgeCommit message (Collapse)Author
2022-04-14x86/32: Remove lazy GS macrosBrian Gerst
GS is always a user segment now. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220325153953.162643-4-brgerst@gmail.com
2021-11-19signal: Replace force_fatal_sig with force_exit_sig when in doubtEric W. Biederman
Recently to prevent issues with SECCOMP_RET_KILL and similar signals being changed before they are delivered SA_IMMUTABLE was added. Unfortunately this broke debuggers[1][2] which reasonably expect to be able to trap synchronous SIGTRAP and SIGSEGV even when the target process is not configured to handle those signals. Add force_exit_sig and use it instead of force_fatal_sig where historically the code has directly called do_exit. This has the implementation benefits of going through the signal exit path (including generating core dumps) without the danger of allowing userspace to ignore or change these signals. This avoids userspace regressions as older kernels exited with do_exit which debuggers also can not intercept. In the future is should be possible to improve the quality of implementation of the kernel by changing some of these force_exit_sig calls to force_fatal_sig. That can be done where it matters on a case-by-case basis with careful analysis. Reported-by: Kyle Huey <me@kylehuey.com> Reported-by: kernel test robot <oliver.sang@intel.com> [1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com [2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die") Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV") Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler") Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig") Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails") Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit") Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.") Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure") Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <khuey@kylehuey.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-11-12signal/vm86_32: Remove pointless test in BUG_ONEric W. Biederman
kernel test robot <oliver.sang@intel.com> writes[1]: > > Greeting, > > FYI, we noticed the following commit (built with gcc-9): > > commit: 1a4d21a23c4ca7467726be7db9ae8077a62b2c62 ("signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON") > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git master > > in testcase: trinity > version: trinity-static-i386-x86_64-1c734c75-1_2020-01-06 > with following parameters: > > > [ 70.645554][ T3747] kernel BUG at arch/x86/kernel/vm86_32.c:109! > [ 70.646185][ T3747] invalid opcode: 0000 [#1] SMP > [ 70.646682][ T3747] CPU: 0 PID: 3747 Comm: trinity-c6 Not tainted 5.15.0-rc1-00009-g1a4d21a23c4c #1 > [ 70.647598][ T3747] EIP: save_v86_state (arch/x86/kernel/vm86_32.c:109 (discriminator 3)) > [ 70.648113][ T3747] Code: 89 c3 64 8b 35 60 b8 25 c2 83 ec 08 89 55 f0 8b 96 10 19 00 00 89 55 ec e8 c6 2d 0c 00 fb 8b 55 ec 85 d2 74 05 83 3a 00 75 02 <0f> 0b 8b 86 10 19 00 00 8b 4b 38 8b 78 48 31 cf 89 f8 8b 7a 4c 81 > [ 70.650136][ T3747] EAX: 00000001 EBX: f5f49fac ECX: 0000000b EDX: f610b600 > [ 70.650852][ T3747] ESI: f5f79cc0 EDI: f5f79cc0 EBP: f5f49f04 ESP: f5f49ef0 > [ 70.651593][ T3747] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010246 > [ 70.652413][ T3747] CR0: 80050033 CR2: 00004000 CR3: 35fc7000 CR4: 000406d0 > [ 70.653169][ T3747] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 > [ 70.653897][ T3747] DR6: fffe0ff0 DR7: 00000400 > [ 70.654382][ T3747] Call Trace: > [ 70.654719][ T3747] arch_do_signal_or_restart (arch/x86/kernel/signal.c:792 arch/x86/kernel/signal.c:867) > [ 70.655288][ T3747] exit_to_user_mode_prepare (kernel/entry/common.c:174 kernel/entry/common.c:209) > [ 70.655854][ T3747] irqentry_exit_to_user_mode (kernel/entry/common.c:126 kernel/entry/common.c:317) > [ 70.656450][ T3747] irqentry_exit (kernel/entry/common.c:406) > [ 70.656897][ T3747] exc_page_fault (arch/x86/mm/fault.c:1535) > [ 70.657369][ T3747] ? sysvec_kvm_asyncpf_interrupt (arch/x86/mm/fault.c:1488) > [ 70.657989][ T3747] handle_exception (arch/x86/entry/entry_32.S:1085) vm86_32.c:109 is: "BUG_ON(!vm86 || !vm86->user_vm86)" When trying to understand the failure Brian Gerst pointed out[2] that the code does not need protection against vm86->user_vm86 being NULL. The copy_from_user code will already handles that case if the address is going to fault. Looking futher I realized that if we care about not allowing struct vm86plus_struct at address 0 it should be do_sys_vm86 (the system call) that does the filtering. Not way down deep when the emulation has completed in save_v86_state. So let's just remove the silly case of attempting to filter a userspace address with a BUG_ON. Existing userspace can't break and it won't make the kernel any more attackable as the userspace access helpers will handle it, if it isn't a good userspace pointer. I have run the reproducer the fuzzer gave me before I made this change and it reproduced, and after I made this change and I have not seen the reported failure. So it does looks like this fixes the reported issue. [1] https://lkml.kernel.org/r/20211112074030.GB19820@xsang-OptiPlex-9020 [2] https://lkml.kernel.org/r/CAMzpN2jkK5sAv-Kg_kVnCEyVySiqeTdUORcC=AdG1gV6r8nUew@mail.gmail.com Suggested-by: Brian Gerst <brgerst@gmail.com> Reported-by: kernel test robot <oliver.sang@intel.com> Tested-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-10-29signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)Eric W. Biederman
Now that force_fatal_sig exists it is unnecessary and a bit confusing to use force_sigsegv in cases where the simpler force_fatal_sig is wanted. So change every instance we can to make the code clearer. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Link: https://lkml.kernel.org/r/877de7jrev.fsf@disp2133 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-10-25signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.Eric W. Biederman
Update save_v86_state to always complete all of it's work except possibly some of the copies to userspace even if save_v86_state takes a fault. This ensures that the kernel is always in a sane state, even if userspace has done something silly. When save_v86_state takes a fault update it to force userspace to take a SIGSEGV and terminate the userspace application. As Andy pointed out in review of the first version of this change there are races between sigaction and the application terinating. Now that the code has been modified to always perform all save_v86_state's work (except possibly copying to userspace) those races do not matter from a kernel perspective. Forcing the userspace application to terminate (by resetting it's handler to SIGDFL) is there to keep everything as close to the current behavior as possible while removing the unique (and difficult to maintain) use of do_exit. If this new SIGSEGV happens during handle_signal the next time around the exit_to_user_mode_loop, SIGSEGV will be delivered to userspace. All of the callers of handle_vm86_trap and handle_vm86_fault run the exit_to_user_mode_loop before they return to userspace any signal sent to the current task during their execution will be delivered to the current task before that tasks exits to usermode. Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: H Peter Anvin <hpa@zytor.com> v1: https://lkml.kernel.org/r/20211020174406.17889-10-ebiederm@xmission.com Link: https://lkml.kernel.org/r/877de1xcr6.fsf_-_@disp2133 Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2021-10-25signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ONEric W. Biederman
The function save_v86_state is only called when userspace was operating in vm86 mode before entering the kernel. Not having vm86 state in the task_struct should never happen. So transform the hand rolled BUG_ON into an actual BUG_ON to make it clear what is happening. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: H Peter Anvin <hpa@zytor.com> Link: https://lkml.kernel.org/r/20211020174406.17889-9-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2021-01-21x86/vm86/32: Remove VM86_SCREEN_BITMAP supportAndy Lutomirski
The implementation was rather buggy. It unconditionally marked PTEs read-only, even for VM_SHARED mappings. I'm not sure whether this is actually a problem, but it certainly seems unwise. More importantly, it released the mmap lock before flushing the TLB, which could allow a racing CoW operation to falsely believe that the underlying memory was not writable. I can't find any users at all of this mechanism, so just remove it. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Stas Sergeev <stsp2@yandex.ru> Link: https://lkml.kernel.org/r/f3086de0babcab36f69949b5780bde851f719bc8.1611078018.git.luto@kernel.org
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-18x86: switch save_v86_state() to unsafe_put_user()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-03-18vm86: get rid of get_user_ex() useAl Viro
Just do a copyin of what we want into a local variable and be done with that. We are guaranteed to be on shallow stack here... Note that conditional expression for range passed to access_ok() in mainline had been pointless all along - the only difference between vm86plus_struct and vm86_struct is that the former has one extra field in the end and when we get to copyin of that field (conditional upon 'plus' argument), we use copy_from_user(). Moreover, all fields starting with ->int_revectored are copied that way, so we only need that check (be it done by access_ok() or by user_access_begin()) only on the beginning of the structure - the fields that used to be covered by that get_user_try() block. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-01-08x86: Remove force_iret()Brian Gerst
force_iret() was originally intended to prevent the return to user mode with the SYSRET or SYSEXIT instructions, in cases where the register state could have been changed to be incompatible with those instructions. The entry code has been significantly reworked since then, and register state is validated before SYSRET or SYSEXIT are used. force_iret() no longer serves its original purpose and can be eliminated. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Oleg Nesterov <oleg@redhat.com> Link: https://lkml.kernel.org/r/20191219115812.102620-1-brgerst@gmail.com
2019-05-27signal: Remove task parameter from force_sigEric W. Biederman
All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-04-08x86: Convert some slow-path static_cpu_has() callers to boot_cpu_has()Borislav Petkov
Using static_cpu_has() is pointless on those paths, convert them to the boot_cpu_has() variant. No functional changes. Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Rik van Riel <riel@surriel.com> Reviewed-by: Juergen Gross <jgross@suse.com> # for paravirt Cc: Aubrey Li <aubrey.li@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Thomas Lendacky <Thomas.Lendacky@amd.com> Cc: linux-edac@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: virtualization@lists.linux-foundation.org Cc: x86@kernel.org Link: https://lkml.kernel.org/r/20190330112022.28888-3-bp@alien8.de
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-09x86/mm/tlb: Add freed_tables argument to flush_tlb_mm_rangeRik van Riel
Add an argument to flush_tlb_mm_range to indicate whether page tables are about to be freed after this TLB flush. This allows for an optimization of flush_tlb_mm_range to skip CPUs in lazy TLB mode. No functional changes. Cc: npiggin@gmail.com Cc: mingo@kernel.org Cc: will.deacon@arm.com Cc: songliubraving@fb.com Cc: kernel-team@fb.com Cc: luto@kernel.org Cc: hpa@zytor.com Signed-off-by: Rik van Riel <riel@surriel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180926035844.1420-6-riel@surriel.com
2018-10-09x86/mm: Page size aware flush_tlb_mm_range()Peter Zijlstra
Use the new tlb_get_unmap_shift() to determine the stride of the INVLPG loop. Cc: Nick Piggin <npiggin@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2018-07-20x86/entry: Rename update_sp0 to update_task_stackJoerg Roedel
The function does not update sp0 anymore but updates makes the task-stack visible for entry code. This is by either writing it to sp1 or by doing a hypercall. Rename the function to get rid of the misleading name. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Pavel Machek <pavel@ucw.cz> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Waiman Long <llong@redhat.com> Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca> Cc: joro@8bytes.org Link: https://lkml.kernel.org/r/1531906876-13451-15-git-send-email-joro@8bytes.org
2018-03-14x86/vm86/32: Fix POPF emulationAndy Lutomirski
POPF would trap if VIP was set regardless of whether IF was set. Fix it. Suggested-by: Stas Sergeev <stsp@list.ru> Reported-by: Bart Oldeman <bartoldeman@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 5ed92a8ab71f ("x86/vm86: Use the normal pt_regs area for vm86") Link: http://lkml.kernel.org/r/ce95f40556e7b2178b6bc06ee9557827ff94bd28.1521003603.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07Merge branch 'linus' into x86/asm, to pick up fixes and resolve conflictsIngo Molnar
Conflicts: arch/x86/kernel/cpu/Makefile Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02x86/entry/64: Remove all remaining direct thread_struct::sp0 readsAndy Lutomirski
The only remaining readers in context switch code or vm86(), and they all just want to update TSS.sp0 to match the current task. Replace them all with a new helper update_sp0(). Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/2d231687f4ff288c9d9e98d7861b7df374246ac3.1509609304.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02x86/entry/64: Pass SP0 directly to load_sp0()Andy Lutomirski
load_sp0() had an odd signature: void load_sp0(struct tss_struct *tss, struct thread_struct *thread); Simplify it to: void load_sp0(unsigned long sp0); Also simplify a few get_cpu()/put_cpu() sequences to preempt_disable()/preempt_enable(). Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/2655d8b42ed940aa384fe18ee1129bbbcf730a08.1509609304.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02x86/entry/32: Pull the MSR_IA32_SYSENTER_CS update code out of native_load_sp0()Andy Lutomirski
This causes the MSR_IA32_SYSENTER_CS write to move out of the paravirt callback. This shouldn't affect Xen PV: Xen already ignores MSR_IA32_SYSENTER_ESP writes. In any event, Xen doesn't support vm86() in a useful way. Note to any potential backporters: This patch won't break lguest, as lguest didn't have any SYSENTER support at all. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/75cf09fe03ae778532d0ca6c65aa58e66bc2f90c.1509609304.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-26x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()Andy Lutomirski
mark_screen_rdonly() is the last remaining caller of flush_tlb(). flush_tlb_mm_range() is potentially faster and isn't obsolete. Compile-tested only because I don't know whether software that uses this mechanism even exists. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/791a644076fc3577ba7f7b7cafd643cc089baa7d.1492844372.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-14x86/mm: Convert trivial cases of page table walk to 5-level pagingKirill A. Shutemov
This patch only covers simple cases. Less trivial cases will be converted with separate patches. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170313143309.16020-3-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-13x86/vm86: Fix unused variable warning if THP is disabledKirill A. Shutemov
GCC complains about unused variable 'vma' in mark_screen_rdonly() if THP is disabled: arch/x86/kernel/vm86_32.c: In function ‘mark_screen_rdonly’: arch/x86/kernel/vm86_32.c:180:26: warning: unused variable ‘vma’ [-Wunused-variable] struct vm_area_struct *vma = find_vma(mm, 0xA0000); That's silly. pmd_trans_huge() resolves to 0 when THP is disabled, so the whole block should be eliminated. Moving the variable declaration outside the if() block shuts GCC up. Reported-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Borislav Petkov <bp@suse.de> Cc: Carlos O'Donell <carlos@redhat.com> Link: http://lkml.kernel.org/r/20170213125228.63645-1-kirill.shutemov@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-08x86, bitops: remove use of "sbb" to return CFH. Peter Anvin
Use SETC instead of SBB to return the value of CF from assembly. Using SETcc enables uniformity with other flags-returning pieces of assembly code. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1465414726-197858-2-git-send-email-hpa@linux.intel.com Reviewed-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2016-01-30x86/cpufeature: Replace the old static_cpu_has() with safe variantBorislav Petkov
So the old one didn't work properly before alternatives had run. And it was supposed to provide an optimized JMP because the assumption was that the offset it is jumping to is within a signed byte and thus a two-byte JMP. So I did an x86_64 allyesconfig build and dumped all possible sites where static_cpu_has() was used. The optimization amounted to all in all 12(!) places where static_cpu_has() had generated a 2-byte JMP. Which has saved us a whopping 36 bytes! This clearly is not worth the trouble so we can remove it. The only place where the optimization might count - in __switch_to() - we will handle differently. But that's not subject of this patch. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1453842730-28463-6-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-15thp: rename split_huge_page_pmd() to split_huge_pmd()Kirill A. Shutemov
We are going to decouple splitting THP PMD from splitting underlying compound page. This patch renames split_huge_page_pmd*() functions to split_huge_pmd*() to reflect the fact that it doesn't imply page splitting, only PMD. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-19x86/cpufeature: Remove unused and seldomly used cpu_has_xx macrosBorislav Petkov
Those are stupid and code should use static_cpu_has_safe() or boot_cpu_has() instead. Kill the least used and unused ones. The remaining ones need more careful inspection before a conversion can happen. On the TODO. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1449481182-27541-4-git-send-email-bp@alien8.de Cc: David Sterba <dsterba@suse.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Matt Mackall <mpm@selenic.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-05x86/vm86: Block non-root vm86(old) if mmap_min_addr != 0Andy Lutomirski
vm86 exposes an interesting attack surface against the entry code. Since vm86 is mostly useless anyway if mmap_min_addr != 0, just turn it off in that case. There are some reports that vbetool can work despite setting mmap_min_addr to zero. This shouldn't break that use case, as CAP_SYS_RAWIO already overrides mmap_min_addr. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-31x86/vm86: Rename vm86->v86flags and v86maskBrian Gerst
Rename v86flags to veflags, and v86mask to veflags_mask. Signed-off-by: Brian Gerst <brgerst@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1438148483-11932-9-git-send-email-brgerst@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-31x86/vm86: Rename vm86->vm86_info to user_vm86Brian Gerst
Make it clearer that this is the pointer to the userspace vm86 state area. Signed-off-by: Brian Gerst <brgerst@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1438148483-11932-8-git-send-email-brgerst@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-31x86/vm86: Clean up vm86.h includesBrian Gerst
vm86.h was being implicitly included in alot of places via processor.h, which in turn got it from math_emu.h. Break that chain and explicitly include vm86.h in all files that need it. Also remove unused vm86 field from math_emu_info. Signed-off-by: Brian Gerst <brgerst@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1438148483-11932-7-git-send-email-brgerst@gmail.com [ Fixed build failure. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-31x86/vm86: Use the normal pt_regs area for vm86Brian Gerst
Change to use the normal pt_regs area to enter and exit vm86 mode. This is done by increasing the padding at the top of the stack to make room for the extra vm86 segment slots in the IRET frame. It then saves the 32-bit regs in the off-stack vm86 data, and copies in the vm86 regs. Exiting back to 32-bit mode does the reverse. This allows removing the hacks to jump directly into the exit asm code due to having to change the stack pointer. Returning normally from the vm86 syscall and the exception handlers allows things like ptrace and auditing to work properly. Signed-off-by: Brian Gerst <brgerst@gmail.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1438148483-11932-5-git-send-email-brgerst@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-31x86/vm86: Eliminate 'struct kernel_vm86_struct'Brian Gerst
Now there is no vm86-specific data left on the kernel stack while in userspace, except for the 32-bit regs. Signed-off-by: Brian Gerst <brgerst@gmail.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1438148483-11932-4-git-send-email-brgerst@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-31x86/vm86: Move fields from 'struct kernel_vm86_struct' to 'struct vm86'Brian Gerst
Move the non-regs fields to the off-stack data. Signed-off-by: Brian Gerst <brgerst@gmail.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1438148483-11932-3-git-send-email-brgerst@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-31x86/vm86: Move vm86 fields out of 'thread_struct'Brian Gerst
Allocate a separate structure for the vm86 fields. Signed-off-by: Brian Gerst <brgerst@gmail.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1438148483-11932-2-git-send-email-brgerst@gmail.com [ Build fixes. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21x86/entry/vm86: Move userspace accesses to do_sys_vm86()Brian Gerst
Move the userspace accesses down into the common function in preparation for the next set of patches. Also change to copying the fields explicitly instead of assuming a fixed order in pt_regs and the kernel data structures. Signed-off-by: Brian Gerst <brgerst@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1437354550-25858-4-git-send-email-brgerst@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21x86/entry/vm86: Preserve 'orig_ax'Brian Gerst
There is no legitimate reason for usermode to modify the 'orig_ax' field on entry to vm86 mode, so copy it from the 32-bit regs. Signed-off-by: Brian Gerst <brgerst@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1437354550-25858-3-git-send-email-brgerst@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21x86/entry/vm86: Clean up saved_fs/gsBrian Gerst
There is no need to save FS and non-lazy GS outside the 32-bit regs. Lazy GS still needs to be saved because it wasn't saved on syscall entry. Save it in the gs slot of regs32, which is present but unused. Signed-off-by: Brian Gerst <brgerst@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1437354550-25858-2-git-send-email-brgerst@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-06x86/asm/entry: Rename 'init_tss' to 'cpu_tss'Andy Lutomirski
It has nothing to do with init -- there's only one TSS per cpu. Other names considered include: - current_tss: Confusing because we never switch the tss. - singleton_tss: Too long. This patch was generated with 's/init_tss/cpu_tss/g'. Followup patches will fix INIT_TSS and INIT_TSS_IST by hand. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/da29fb2a793e4f649d93ce2d1ed320ebe8516262.1425611534.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-02x86, vm86: fix VM86 syscalls: use SYSCALL_DEFINEx(...)Alexander van Heukelum
Commit 49cb25e9290 x86: 'get rid of pt_regs argument in vm86/vm86old' got rid of the pt_regs stub for sys_vm86old and sys_vm86. The functions were, however, not changed to use the calling convention for syscalls. [AV: killed asmlinkage_protect() - it's done automatically now] Reported-and-tested-by: Hans de Bruin <jmdebruin@xmsnet.nl> Cc: stable@vger.kernel.org Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03x86: get rid of pt_regs argument in vm86/vm86oldAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-12thp: change split_huge_page_pmd() interfaceKirill A. Shutemov
Pass vma instead of mm and add address parameter. In most cases we already have vma on the stack. We provides split_huge_page_pmd_mm() for few cases when we have mm, but not vma. This change is preparation to huge zero pmd splitting implementation. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: "H. Peter Anvin" <hpa@linux.intel.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-20x86: get rid of TIF_IRET hackeryAl Viro
TIF_NOTIFY_RESUME will work in precisely the same way; all that is achieved by TIF_IRET is appearing that there's some work to be done, so we end up on the iret exit path. Just use NOTIFY_RESUME. And for execve() do that in 32bit start_thread(), not sys_execve() itself. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-06x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level>Joe Perches
Use a more current logging style: - Bare printks should have a KERN_<LEVEL> for consistency's sake - Add pr_fmt where appropriate - Neaten some macro definitions - Convert some Ok output to OK - Use "%s: ", __func__ in pr_fmt for summit - Convert some printks to pr_<level> Message output is not identical in all cases. Signed-off-by: Joe Perches <joe@perches.com> Cc: levinsasha928@gmail.com Link: http://lkml.kernel.org/r/1337655007.24226.10.camel@joe2Laptop [ merged two similar patches, tidied up the changelog ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-29Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Peter Anvin: "The biggest textual change is the cleanup to use symbolic constants for x86 trap values. The only *functional* change and the reason for the x86/x32 dependency is the move of is_ia32_task() into <asm/thread_info.h> so that it can be used in other code that needs to understand if a system call comes from the compat entry point (and therefore uses i386 system call numbers) or not. One intended user for that is the BPF system call filter. Moving it out of <asm/compat.h> means we can define it unconditionally, returning always true on i386." * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Move is_ia32_task to asm/thread_info.h from asm/compat.h x86: Rename trap_no to trap_nr in thread_struct x86: Use enum instead of literals for trap values
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-17 02:45:59 +0000