summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/apic_64.c
AgeCommit message (Collapse)Author
2008-10-13Merge branch 'linus' into oprofile-v2Ingo Molnar
Conflicts: arch/x86/kernel/apic_32.c arch/x86/oprofile/nmi_int.c include/linux/pci_ids.h
2008-10-11Merge branch 'x86/apic' into x86-v28-for-linus-phase4-BIngo Molnar
Conflicts: arch/x86/kernel/apic_32.c arch/x86/kernel/apic_64.c arch/x86/kernel/setup.c drivers/pci/intel-iommu.c include/asm-x86/cpufeature.h include/asm-x86/dma-mapping.h
2008-08-19x86: apic - compilation warnings fixCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19x86: apic - unify disableapic and nolapic setup handlersCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19x86: apic - unify apic_set_verbosityCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19x86: apic - unify local_apic_timer_interruptCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19x86: apic - unify end_local_APIC_setupCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19x86: apic - generic_processor_infoCyrill Gorcunov
- use physid_set instead of phys_cpu and physids_or - set phys_cpu_present_map bit AFTER check for allowed number of processors - add checking for APIC valid version in 64bit mode (mostly not needed but added for merging purpose) - add apic_version definition for 64bit mode which is used now Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19x86: apic - unify disconnect_bsp_APICCyrill Gorcunov
- just #ifdef added Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19x86: apic - unify __setup_APIC_LVTTCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19x86: apic - unify lapic_setup_esrCyrill Gorcunov
We use 32bit code former for 64bit mode since it's much better implementation and easier to merge. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19x86: apic - unify connect_bsp_APICCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19x86: apic - unify lapic_shutdownCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19x86: apic - unify disable_local_APICCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19x86: apic - rearrange maxcpu definitionCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86: apic - unify lapic_resume - fixYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-17x86: apic - unify xapic_icr_readCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-17x86: apic - unify lapic_is_integratedCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-17x86: apic - rearrange functions and commentsCyrill Gorcunov
Rearrange functions and comments to find differences easier. Also use apic_printk in setup_boot_APIC_clock for 64bit mode. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-17x86: apic - unify lapic_suspendCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-17x86: apic - unify lapic_resumeCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-17x86: apic - unify clear_local_APICCyrill Gorcunov
- Remove redundant masking of APIC_LVTTHMR register in apic_32.c - Add masking of APIC_LVTTHMR register to apic_64.c. We use a bit complicated #ifdef here: CONFIG_X86_MCE_P4THERMAL is 32bit specific and X86_MCE_INTEL is 64bit specific so the appropriate config variable will be set by Kconfig. - the APIC_ESR register clearing in apic_64.c now uses not straightforward way but this is allowed tradeoff. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-16x86: apic - unify init_bsp_APICCyrill Gorcunov
- remove redundant read of APIC_LVR register in 64bit mode - APIC is always integrated for 64bit mode so gcc will eliminate lapic_is_integrated call Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-16x86: apic - sync_Arb_IDs style fixupCyrill Gorcunov
No changes on binary level Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86: apic - unify sync_Arb_IDsCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86: apic - unify __setup_APIC_LVTTCyrill Gorcunov
To be able to unify this function we RE-introduce APIC_DIVISOR for 64bit mode. This snipped was eliminated in some time ago in a sake of clenup but now we need it again since it allow up to get rid of #ifdef(s). And lapic_is_integrated call is added in apic_64.c but since we always have APIC integrated on 64bit cpu compiler will ignore this call. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86: apic - unify disable_apic_timerCyrill Gorcunov
Get rid of local_apic_timer_disabled and use disable_apic_timer instead. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86: apic - use SET_APIC_DEST_FIELD instead of hardcoded shiftCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-14Merge branch 'x86/apic' into x86/coreIngo Molnar
2008-08-14x86: resurrect proper handling of maxcpus= kernel option (v2)Max Krasnyansky
For some reason we had two parsers registered for maxcpus=. One in init/main.c and another in arch/x86/smpboot.c. So I nuked the one in arch/x86. Also 64-bit kernels used to handle maxcpus= as documented in Documentation/cpu-hotplug.txt. CPUs with 'id > maxcpus' are initialized but not booted. 32-bit version for some reason ignored them even though all the infrastructure for booting them later is there. In the current mainline both 64 and 32 bit versions are broken. This patch restores the correct behaviour. I've tested x86_64 version on 4- and 8- way Core2 and 2-way Opteron based machines. Various config combinations SMP, !SMP, CPU_HOTPLUG, !CPU_HOTPLUG. Booted with maxcpus=1 and maxcpus=4, etc. Everything is working as expected. So far we've received two reports from different people confirming that 32-bit version also works fine, both on dual core laptops and 16way server machines. [v2: This version fixes visws breakage pointed out by Ingo.] Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Cc: lizf@cn.fujitsu.com Cc: jeff.chua.linux@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26x86: apic: changing export symbols to *_GPLRobert Richter
This fits better here. Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Barry Kasindorf <barry.kasindorf@amd.com> Cc: oprofile-list <oprofile-list@lists.sourceforge.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26x86: apic: export symbols for extended interrupt LVT functionsRobert Richter
This patch adds EXPORT_SYMBOLs to allow OProfile to be built as module. Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: oprofile-list <oprofile-list@lists.sourceforge.net> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Barry Kasindorf <barry.kasindorf@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26x86: apic_*.c: add description to AMD's extended LVT functionsRobert Richter
Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: oprofile-list <oprofile-list@lists.sourceforge.net> Cc: Barry Kasindorf <barry.kasindorf@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-24x86: apic unification - merge down enable_NMI_through_LVT0Cyrill Gorcunov
No code change on binary level. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: macro@linux-mips.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-24x86: apic unification - merge down lapic_get_maxlvtCyrill Gorcunov
No code change on binary level. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: macro@linux-mips.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-22Merge branch 'linus' into x86/x2apicIngo Molnar
2008-07-21Merge branches 'x86/urgent', 'x86/amd-iommu', 'x86/apic', 'x86/cleanups', ↵Ingo Molnar
'x86/core', 'x86/cpu', 'x86/fixmap', 'x86/gart', 'x86/kprobes', 'x86/memtest', 'x86/modules', 'x86/nmi', 'x86/pat', 'x86/reboot', 'x86/setup', 'x86/step', 'x86/unify-pci', 'x86/uv', 'x86/xen' and 'xen-64bit' into x86/for-linus
2008-07-21x86: use setup_clear_cpu_cap() when disabling the lapicYinghai Lu
... so don't need to call clear_cpu_cap again in early_identify_cpu, and could use cleared_cpu_caps like other places. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-19x86: APIC: Remove apic_write_around(); use alternatives, merge fixSuresh Siddha
On Fri, Jul 18, 2008 at 02:03:48PM -0700, Ingo Molnar wrote: > > * Yinghai Lu <yhlu.kernel@gmail.com> wrote: > > > > git merge tip/x86/x2apic > > CONFLICT (content): Merge conflict in arch/x86/kernel/Makefile > > CONFLICT (content): Merge conflict in arch/x86/kernel/paravirt.c > > CONFLICT (content): Merge conflict in arch/x86/kernel/smpboot.c > > CONFLICT (content): Merge conflict in arch/x86/kernel/vmi_32.c > > CONFLICT (content): Merge conflict in arch/x86/xen/enlighten.c > > CONFLICT (content): Merge conflict in include/asm-x86/apic.h > > CONFLICT (content): Merge conflict in include/asm-x86/paravirt.h > > that's due to the changes in tip/x86/apic and in tip/x86/uv. > > ok, i've just merged x86/apic into x86/x2apic and x86/uv as well, and > pushed out the result. > > Note: it's a first raw merge and completely untested. It will now merge > cleanly into tip/master. There are probably a few details missing. Ingo, thanks for doing this. While I was testing my merge changes, you posted yours... anyhow we need this piece, which is missing from your merge. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18Merge branch 'x86/apic' into x86/x2apicIngo Molnar
Conflicts: arch/x86/kernel/paravirt.c arch/x86/kernel/smpboot.c arch/x86/kernel/vmi_32.c arch/x86/lguest/boot.c arch/x86/xen/enlighten.c include/asm-x86/apic.h include/asm-x86/paravirt.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18x86: APIC: Make apic_verbosity unsignedMaciej W. Rozycki
As a microoptimisation, make apic_verbosity unsigned. This will make apic_printk(APIC_QUIET, ...) expand into just printk(...) with the surrounding condition and a reference to apic_verbosity removed. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18x86: apic_64 - make calibrate_APIC_clock to return error codeCyrill Gorcunov
Make calibration_result to return error and check calibration_result to be sufficient inside calibrate_APIC_clock. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: macro@linux-mips.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x86: make read_apic_id return final apicidYinghai Lu
also remove GET_APIC_ID when read_apic_id is used. need to apply after [PATCH] x86: mach_apicdef.h need to include before smp.h Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x64, x2apic/intr-remap: add x2apic support, including enabling ↵Suresh Siddha
interrupt-remapping x2apic support. Interrupt-remapping must be enabled before enabling x2apic, this is needed to ensure that IO interrupts continue to work properly after the cpu mode is changed to x2apic(which uses 32bit extended physical/cluster apic id). On systems where apicid's are > 255, BIOS can handover the control to OS in x2apic mode. Or if the OS handover was in legacy xapic mode, check if it is capable of x2apic mode. And if we succeed in enabling Interrupt-remapping, then we can enable x2apic mode in the CPU. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x64, x2apic/intr-remap: IO-APIC support for interrupt-remappingSuresh Siddha
IO-APIC support in the presence of interrupt-remapping infrastructure. IO-APIC RTE will be programmed with interrupt-remapping table entry(IRTE) index and the IRTE will contain information about the vector, cpu destination, trigger mode etc, which traditionally was present in the IO-APIC RTE. Introduce a new irq_chip for cleaner irq migration (in the process context as opposed to the current irq migration in the context of an interrupt. interrupt-remapping infrastructure will help us achieve this cleanly). For edge triggered, irq migration is a simple atomic update(of vector and cpu destination) of IRTE and flush the hardware cache. For level triggered, we need to modify the io-apic RTE aswell with the update vector information, along with modifying IRTE with vector and cpu destination. So irq migration for level triggered is little bit more complex compared to edge triggered migration. But the good news is, we use the same algorithm for level triggered migration as we have today, only difference being, we now initiate the irq migration from process context instead of the interrupt context. In future, when we do a directed EOI (combined with cpu EOI broadcast suppression) to the IO-APIC, level triggered irq migration will also be as simple as edge triggered migration and we can do the irq migration with a simple atomic update to IO-APIC RTE. TBD: some tests/changes needed in the presence of fixup_irqs() for level triggered irq migration. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x64, x2apic/intr-remap: x2apic ops for x2apic mode supportSuresh Siddha
x2apic ops for x2apic mode support. This uses MSR interface and differs slightly from the xapic register layout. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x64, x2apic/intr-remap: basic apic ops supportSuresh Siddha
Introduce basic apic operations which handle the apic programming. This will be used later to introduce another specific operations for x2apic. For the perfomance critial accesses like IPI's, EOI etc, we use the native operations as they are already referenced by different indirections like genapic, irq_chip etc. 64bit Paravirt ops can also define their apic operations accordingly. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x64, x2apic/intr-remap: Interrupt-remapping and x2apic support, fixSuresh Siddha
Yinghai Lu wrote: > Setting APIC routing to physical flat > Kernel panic - not syncing: Boot APIC ID in local APIC unexpected (0 vs 4) > Pid: 1, comm: swapper Not tainted 2.6.26-rc9-tip-01763-g74f94b1-dirty #320 > > Call Trace: > [<ffffffff80a21505>] ? set_cpu_sibling_map+0x38c/0x3bd > [<ffffffff80245215>] ? read_xapic_id+0x25/0x3e > [<ffffffff80e5a2c3>] ? verify_local_APIC+0x139/0x1b9 > [<ffffffff80245215>] ? read_xapic_id+0x25/0x3e > [<ffffffff80e589af>] ? native_smp_prepare_cpus+0x224/0x2e9 > [<ffffffff80e4881a>] ? kernel_init+0x64/0x341 > [<ffffffff8022a439>] ? child_rip+0xa/0x11 > [<ffffffff80e487b6>] ? kernel_init+0x0/0x341 > [<ffffffff8022a42f>] ? child_rip+0x0/0x11 > > > guess read_apic_id changing cuase some problem... genapic's read_apic_id() returns the actual apic id extracted from the APIC_ID register. And in some cases like UV, read_apic_id() returns completely different values from APIC ID register. Use the native apic register read, rather than genapic read_apic_id() in verify_local_APIC() And also, lapic_suspend() should also use native apic register read. Reported-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "akpm@linux-foundation.org" <akpm@linux-foundation.org> Cc: "arjan@linux.intel.com" <arjan@linux.intel.com> Cc: "andi@firstfloor.org" <andi@firstfloor.org> Cc: "ebiederm@xmission.com" <ebiederm@xmission.com> Cc: "jbarnes@virtuousgeek.org" <jbarnes@virtuousgeek.org> Cc: "steiner@sgi.com" <steiner@sgi.com> Cc: "jeremy@goop.org" <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x64, x2apic/intr-remap: introduce read_apic_id() to genapic routinesSuresh Siddha
Move the read_apic_id() to genapic routines. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: nmi_watchdog - use NMI_NONE by defaultCyrill Gorcunov
There is no need to keep NMI_DISABLED definition and use it for nmi_watchdog by default. Here is the point why: - IO-APIC and APIC chips are programmed for nmi_watchdog support at very early stage of kernel booting and not having nmi_watchdog specified as boot option lead only to nmi_watchdog becomes to NMI_NONE anyway - enable nmi_watchdog thru /proc/sys/kernel/nmi if it was not specified at boot is not possible too (even having this sysfs entry) Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: macro@linux-mips.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-28 18:39:24 +0000