summaryrefslogtreecommitdiff
path: root/arch/x86/include/asm/pgtable-3level.h
AgeCommit message (Collapse)Author
2023-02-02x86/mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE also on 32bitDavid Hildenbrand
Let's support __HAVE_ARCH_PTE_SWP_EXCLUSIVE just like we already do on x86-64. After deciphering the PTE layout it becomes clear that there are still unused bits for 2-level and 3-level page tables that we should be able to use. Reusing a bit avoids stealing one bit from the swap offset. While at it, mask the type in __swp_entry(); use some helper definitions to make the macros easier to grasp. Link: https://lkml.kernel.org/r/20230113171026.582290-25-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-15x86/mm/pae: Get rid of set_64bit()Peter Zijlstra
Recognise that set_64bit() is a special case of our previously introduced pxx_xchg64(), so use that and get rid of set_64bit(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221022114425.233481884%40infradead.org
2022-12-15x86/mm/pae: Be consistent with pXXp_get_and_clear()Peter Zijlstra
Given that ptep_get_and_clear() uses cmpxchg8b, and that should be by far the most common case, there's no point in having an optimized variant for pmd/pud. Introduce the pxx_xchg64() helper to implement the common logic once. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221022114425.103392961%40infradead.org
2022-12-15x86/mm/pae: Use WRITE_ONCE()Peter Zijlstra
Disallow write-tearing, that would be really unfortunate. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221022114425.038102604%40infradead.org
2022-12-15x86/mm/pae: Don't (ab)use atomic64Peter Zijlstra
PAE implies CX8, write readable code. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221022114424.971450128%40infradead.org
2022-12-15mm: Fix pmd_read_atomic()Peter Zijlstra
AFAICT there's no reason to do anything different than what we do for PTEs. Make it so (also affects SH). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221022114424.711181252%40infradead.org
2022-12-15x86/mm/pae: Make pmd_t similar to pte_tPeter Zijlstra
Instead of mucking about with at least 2 different ways of fudging it, do the same thing we do for pte_t. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221022114424.580310787%40infradead.org
2022-09-26mm/x86: use SWP_TYPE_BITS in 3-level swap macrosPeter Xu
Patch series "mm: Remember a/d bits for migration entries", v4. Problem ======= When migrating a page, right now we always mark the migrated page as old & clean. However that could lead to at least two problems: (1) We lost the real hot/cold information while we could have persisted. That information shouldn't change even if the backing page is changed after the migration, (2) There can be always extra overhead on the immediate next access to any migrated page, because hardware MMU needs cycles to set the young bit again for reads, and dirty bits for write, as long as the hardware MMU supports these bits. Many of the recent upstream works showed that (2) is not something trivial and actually very measurable. In my test case, reading 1G chunk of memory - jumping in page size intervals - could take 99ms just because of the extra setting on the young bit on a generic x86_64 system, comparing to 4ms if young set. This issue is originally reported by Andrea Arcangeli. Solution ======== To solve this problem, this patchset tries to remember the young/dirty bits in the migration entries and carry them over when recovering the ptes. We have the chance to do so because in many systems the swap offset is not really fully used. Migration entries use swp offset to store PFN only, while the PFN is normally not as large as swp offset and normally smaller. It means we do have some free bits in swp offset that we can use to store things like A/D bits, and that's how this series tried to approach this problem. max_swapfile_size() is used here to detect per-arch offset length in swp entries. We'll automatically remember the A/D bits when we find that we have enough swp offset field to keep both the PFN and the extra bits. Since max_swapfile_size() can be slow, the last two patches cache the results for it and also swap_migration_ad_supported as a whole. Known Issues / TODOs ==================== We still haven't taught madvise() to recognize the new A/D bits in migration entries, namely MADV_COLD/MADV_FREE. E.g. when MADV_COLD upon a migration entry. It's not clear yet on whether we should clear the A bit, or we should just drop the entry directly. We didn't teach idle page tracking on the new migration entries, because it'll need larger rework on the tree on rmap pgtable walk. However it should make it already better because before this patchset page will be old page after migration, so the series will fix potential false negative of idle page tracking when pages were migrated before observing. The other thing is migration A/D bits will not start to working for private device swap entries. The code is there for completeness but since private device swap entries do not yet have fields to store A/D bits, even if we'll persistent A/D across present pte switching to migration entry, we'll lose it again when the migration entry converted to private device swap entry. Tests ===== After the patchset applied, the immediate read access test [1] of above 1G chunk after migration can shrink from 99ms to 4ms. The test is done by moving 1G pages from node 0->1->0 then read it in page size jumps. The test is with Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz. Similar effect can also be measured when writting the memory the 1st time after migration. After applying the patchset, both initial immediate read/write after page migrated will perform similarly like before migration happened. Patch Layout ============ Patch 1-2: Cleanups from either previous versions or on swapops.h macros. Patch 3-4: Prepare for the introduction of migration A/D bits Patch 5: The core patch to remember young/dirty bit in swap offsets. Patch 6-7: Cache relevant fields to make migration_entry_supports_ad() fast. [1] https://github.com/xzpeter/clibs/blob/master/misc/swap-young.c This patch (of 7): Replace all the magic "5" with the macro. Link: https://lkml.kernel.org/r/20220811161331.37055-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220811161331.37055-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2020-06-09mmap locking API: convert mmap_sem commentsMichel Lespinasse
Convert comments that reference mmap_sem to reference mmap_lock instead. [akpm@linux-foundation.org: fix up linux-next leftovers] [akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil] [akpm@linux-foundation.org: more linux-next fixups, per Michel] Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25x86/mm: Clean up the pmd_read_atomic() commentsIngo Molnar
Fix spelling, consistent parenthesis and grammar - and also clarify the language where needed. Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-25x86/mm: Fix function name typo in pmd_read_atomic() commentWei Yang
The function involved should be pte_offset_map_lock() and we never have function pmd_offset_map_lock defined. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190925014453.20236-1-richardw.yang@linux.intel.com [ Minor edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-12mm: lift the x86_32 PAE version of gup_get_pte to common codeChristoph Hellwig
The split low/high access is the only non-READ_ONCE version of gup_get_pte that did show up in the various arch implemenations. Lift it to common code and drop the ifdef based arch override. Link: http://lkml.kernel.org/r/20190625143715.1689-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-27x86/pae: use 64 bit atomic xchg function in native_ptep_get_and_clearJuergen Gross
Using only 32-bit writes for the pte will result in an intermediate L1TF vulnerable PTE. When running as a Xen PV guest this will at once switch the guest to shadow mode resulting in a loss of performance. Use arch_atomic64_xchg() instead which will perform the requested operation atomically with all 64 bits. Some performance considerations according to: https://software.intel.com/sites/default/files/managed/ad/dc/Intel-Xeon-Scalable-Processor-throughput-latency.pdf The main number should be the latency, as there is no tight loop around native_ptep_get_and_clear(). "lock cmpxchg8b" has a latency of 20 cycles, while "lock xchg" (with a memory operand) isn't mentioned in that document. "lock xadd" (with xadd having 3 cycles less latency than xchg) has a latency of 11, so we can assume a latency of 14 for "lock xchg". Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jan Beulich <jbeulich@suse.com> Tested-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-14Merge branch 'l1tf-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Merge L1 Terminal Fault fixes from Thomas Gleixner: "L1TF, aka L1 Terminal Fault, is yet another speculative hardware engineering trainwreck. It's a hardware vulnerability which allows unprivileged speculative access to data which is available in the Level 1 Data Cache when the page table entry controlling the virtual address, which is used for the access, has the Present bit cleared or other reserved bits set. If an instruction accesses a virtual address for which the relevant page table entry (PTE) has the Present bit cleared or other reserved bits set, then speculative execution ignores the invalid PTE and loads the referenced data if it is present in the Level 1 Data Cache, as if the page referenced by the address bits in the PTE was still present and accessible. While this is a purely speculative mechanism and the instruction will raise a page fault when it is retired eventually, the pure act of loading the data and making it available to other speculative instructions opens up the opportunity for side channel attacks to unprivileged malicious code, similar to the Meltdown attack. While Meltdown breaks the user space to kernel space protection, L1TF allows to attack any physical memory address in the system and the attack works across all protection domains. It allows an attack of SGX and also works from inside virtual machines because the speculation bypasses the extended page table (EPT) protection mechanism. The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646 The mitigations provided by this pull request include: - Host side protection by inverting the upper address bits of a non present page table entry so the entry points to uncacheable memory. - Hypervisor protection by flushing L1 Data Cache on VMENTER. - SMT (HyperThreading) control knobs, which allow to 'turn off' SMT by offlining the sibling CPU threads. The knobs are available on the kernel command line and at runtime via sysfs - Control knobs for the hypervisor mitigation, related to L1D flush and SMT control. The knobs are available on the kernel command line and at runtime via sysfs - Extensive documentation about L1TF including various degrees of mitigations. Thanks to all people who have contributed to this in various ways - patches, review, testing, backporting - and the fruitful, sometimes heated, but at the end constructive discussions. There is work in progress to provide other forms of mitigations, which might be less horrible performance wise for a particular kind of workloads, but this is not yet ready for consumption due to their complexity and limitations" * 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) x86/microcode: Allow late microcode loading with SMT disabled tools headers: Synchronise x86 cpufeatures.h for L1TF additions x86/mm/kmmio: Make the tracer robust against L1TF x86/mm/pat: Make set_memory_np() L1TF safe x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert x86/speculation/l1tf: Invert all not present mappings cpu/hotplug: Fix SMT supported evaluation KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry x86/speculation: Simplify sysfs report of VMX L1TF vulnerability Documentation/l1tf: Remove Yonah processors from not vulnerable list x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr() x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d x86: Don't include linux/irq.h from asm/hardirq.h x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d x86/irq: Demote irq_cpustat_t::__softirq_pending to u16 x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush() x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond' x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush() cpu/hotplug: detect SMT disabled by BIOS ...
2018-07-20x86/mm/pae: Populate the user page-table with user pgd'sJoerg Roedel
When a PGD entry is populated, make sure to populate it in the user page-table too. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Pavel Machek <pavel@ucw.cz> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Waiman Long <llong@redhat.com> Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca> Cc: joro@8bytes.org Link: https://lkml.kernel.org/r/1531906876-13451-23-git-send-email-joro@8bytes.org
2018-06-27x86/speculation/l1tf: Protect PAE swap entries against L1TFVlastimil Babka
The PAE 3-level paging code currently doesn't mitigate L1TF by flipping the offset bits, and uses the high PTE word, thus bits 32-36 for type, 37-63 for offset. The lower word is zeroed, thus systems with less than 4GB memory are safe. With 4GB to 128GB the swap type selects the memory locations vulnerable to L1TF; with even more memory, also the swap offfset influences the address. This might be a problem with 32bit PAE guests running on large 64bit hosts. By continuing to keep the whole swap entry in either high or low 32bit word of PTE we would limit the swap size too much. Thus this patch uses the whole PAE PTE with the same layout as the 64bit version does. The macros just become a bit tricky since they assume the arch-dependent swp_entry_t to be 32bit. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michal Hocko <mhocko@suse.com>
2018-06-20x86/speculation/l1tf: Protect PROT_NONE PTEs against speculationAndi Kleen
When PTEs are set to PROT_NONE the kernel just clears the Present bit and preserves the PFN, which creates attack surface for L1TF speculation speculation attacks. This is important inside guests, because L1TF speculation bypasses physical page remapping. While the host has its own migitations preventing leaking data from other VMs into the guest, this would still risk leaking the wrong page inside the current guest. This uses the same technique as Linus' swap entry patch: while an entry is is in PROTNONE state invert the complete PFN part part of it. This ensures that the the highest bit will point to non existing memory. The invert is done by pte/pmd_modify and pfn/pmd/pud_pte for PROTNONE and pte/pmd/pud_pfn undo it. This assume that no code path touches the PFN part of a PTE directly without using these primitives. This doesn't handle the case that MMIO is on the top of the CPU physical memory. If such an MMIO region was exposed by an unpriviledged driver for mmap it would be possible to attack some real memory. However this situation is all rather unlikely. For 32bit non PAE the inversion is not done because there are really not enough bits to protect anything. Q: Why does the guest need to be protected when the HyperVisor already has L1TF mitigations? A: Here's an example: Physical pages 1 2 get mapped into a guest as GPA 1 -> PA 2 GPA 2 -> PA 1 through EPT. The L1TF speculation ignores the EPT remapping. Now the guest kernel maps GPA 1 to process A and GPA 2 to process B, and they belong to different users and should be isolated. A sets the GPA 1 PA 2 PTE to PROT_NONE to bypass the EPT remapping and gets read access to the underlying physical page. Which in this case points to PA 2, so it can read process B's data, if it happened to be in L1, so isolation inside the guest is broken. There's nothing the hypervisor can do about this. This mitigation has to be done in the guest itself. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-01-31x86/mm: provide pmdp_establish() helperKirill A. Shutemov
We need an atomic way to setup pmd page table entry, avoiding races with CPU setting dirty/accessed bits. This is required to implement pmdp_invalidate() that doesn't lose these bits. On PAE we can avoid expensive cmpxchg8b for cases when new page table entry is not present. If it's present, fallback to cpmxchg loop. [akpm@linux-foundation.org: add missing `do' to do-while loop] Link: http://lkml.kernel.org/r/20171213105756.69879-10-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementationKirill A. Shutemov
This patch provides all required callbacks required by the generic get_user_pages_fast() code and switches x86 over - and removes the platform specific implementation. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170606113133.22974-2-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-16mm, x86: fix native_pud_clear build errorArnd Bergmann
We still get a build error in random configurations, after this has been modified a few times: In file included from include/linux/mm.h:68:0, from include/linux/suspend.h:8, from arch/x86/kernel/asm-offsets.c:12: arch/x86/include/asm/pgtable.h:66:26: error: redefinition of 'native_pud_clear' #define pud_clear(pud) native_pud_clear(pud) My interpretation is that the build error comes from a typo in __PAGETABLE_PUD_FOLDED, so fix that typo now, and remove the incorrect #ifdef around the native_pud_clear definition. Fixes: 3e761a42e19c ("mm, x86: fix HIGHMEM64 && PARAVIRT build config for native_pud_clear()") Fixes: a00cc7d9dd93 ("mm, x86: add support for PUD-sized transparent hugepages") Link: http://lkml.kernel.org/r/20170314121330.182155-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Ackedy-by: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Garnier <thgarnie@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27mm, x86: fix HIGHMEM64 && PARAVIRT build config for native_pud_clear()Dave Jiang
Looks like I also missed the build config that includes CONFIG_HIGHMEM64G && CONFIG_PARAVIRT to export the native_pud_clear() dummy function. Fixes: a00cc7d9dd93d ("mm, x86: add support for PUD-sized transparent hugepages") Link: http://lkml.kernel.org/r/148823188084.56076.17451228917824355200.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reported-by: Laura Abbott <labbott@redhat.com> Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, x86: add support for PUD-sized transparent hugepagesMatthew Wilcox
The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10x86: drop _PAGE_FILE and pte_file()-related helpersKirill A. Shutemov
We've replaced remap_file_pages(2) implementation with emulation. Nobody creates non-linear mapping anymore. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13mm: save soft-dirty bits on file pagesCyrill Gorcunov
Andy reported that if file page get reclaimed we lose the soft-dirty bit if it was there, so save _PAGE_BIT_SOFT_DIRTY bit when page address get encoded into pte entry. Thus when #pf happens on such non-present pte we can restore it back. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-22Merge branch 'x86-debug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debug-for-linus git tree from Ingo Molnar. Fix up trivial conflict in arch/x86/kernel/cpu/perf_event_intel.c due to a printk() having changed to a pr_info() differently in the two branches. * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Move call to print_modules() out of show_regs() x86/mm: Mark free_initrd_mem() as __init x86/microcode: Mark microcode_id[] as __initconst x86/nmi: Clean up register_nmi_handler() usage x86: Save cr2 in NMI in case NMIs take a page fault (for i386) x86: Remove cmpxchg from i386 NMI nesting code x86: Save cr2 in NMI in case NMIs take a page fault x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level>
2012-06-20thp: avoid atomic64_read in pmd_read_atomic for 32bit PAEAndrea Arcangeli
In the x86 32bit PAE CONFIG_TRANSPARENT_HUGEPAGE=y case while holding the mmap_sem for reading, cmpxchg8b cannot be used to read pmd contents under Xen. So instead of dealing only with "consistent" pmdvals in pmd_none_or_trans_huge_or_clear_bad() (which would be conceptually simpler) we let pmd_none_or_trans_huge_or_clear_bad() deal with pmdvals where the low 32bit and high 32bit could be inconsistent (to avoid having to use cmpxchg8b). The only guarantee we get from pmd_read_atomic is that if the low part of the pmd was found null, the high part will be null too (so the pmd will be considered unstable). And if the low part of the pmd is found "stable" later, then it means the whole pmd was read atomically (because after a pmd is stable, neither MADV_DONTNEED nor page faults can alter it anymore, and we read the high part after the low part). In the 32bit PAE x86 case, it is enough to read the low part of the pmdval atomically to declare the pmd as "stable" and that's true for THP and no THP, furthermore in the THP case we also have a barrier() that will prevent any inconsistent pmdvals to be cached by a later re-read of the *pmd. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Tested-by: Andrew Jones <drjones@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-06x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level>Joe Perches
Use a more current logging style: - Bare printks should have a KERN_<LEVEL> for consistency's sake - Add pr_fmt where appropriate - Neaten some macro definitions - Convert some Ok output to OK - Use "%s: ", __func__ in pr_fmt for summit - Convert some printks to pr_<level> Message output is not identical in all cases. Signed-off-by: Joe Perches <joe@perches.com> Cc: levinsasha928@gmail.com Link: http://lkml.kernel.org/r/1337655007.24226.10.camel@joe2Laptop [ merged two similar patches, tidied up the changelog ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-29mm: pmd_read_atomic: fix 32bit PAE pmd walk vs pmd_populate SMP race conditionAndrea Arcangeli
When holding the mmap_sem for reading, pmd_offset_map_lock should only run on a pmd_t that has been read atomically from the pmdp pointer, otherwise we may read only half of it leading to this crash. PID: 11679 TASK: f06e8000 CPU: 3 COMMAND: "do_race_2_panic" #0 [f06a9dd8] crash_kexec at c049b5ec #1 [f06a9e2c] oops_end at c083d1c2 #2 [f06a9e40] no_context at c0433ded #3 [f06a9e64] bad_area_nosemaphore at c043401a #4 [f06a9e6c] __do_page_fault at c0434493 #5 [f06a9eec] do_page_fault at c083eb45 #6 [f06a9f04] error_code (via page_fault) at c083c5d5 EAX: 01fb470c EBX: fff35000 ECX: 00000003 EDX: 00000100 EBP: 00000000 DS: 007b ESI: 9e201000 ES: 007b EDI: 01fb4700 GS: 00e0 CS: 0060 EIP: c083bc14 ERR: ffffffff EFLAGS: 00010246 #7 [f06a9f38] _spin_lock at c083bc14 #8 [f06a9f44] sys_mincore at c0507b7d #9 [f06a9fb0] system_call at c083becd start len EAX: ffffffda EBX: 9e200000 ECX: 00001000 EDX: 6228537f DS: 007b ESI: 00000000 ES: 007b EDI: 003d0f00 SS: 007b ESP: 62285354 EBP: 62285388 GS: 0033 CS: 0073 EIP: 00291416 ERR: 000000da EFLAGS: 00000286 This should be a longstanding bug affecting x86 32bit PAE without THP. Only archs with 64bit large pmd_t and 32bit unsigned long should be affected. With THP enabled the barrier() in pmd_none_or_trans_huge_or_clear_bad() would partly hide the bug when the pmd transition from none to stable, by forcing a re-read of the *pmd in pmd_offset_map_lock, but when THP is enabled a new set of problem arises by the fact could then transition freely in any of the none, pmd_trans_huge or pmd_trans_stable states. So making the barrier in pmd_none_or_trans_huge_or_clear_bad() unconditional isn't good idea and it would be a flakey solution. This should be fully fixed by introducing a pmd_read_atomic that reads the pmd in order with THP disabled, or by reading the pmd atomically with cmpxchg8b with THP enabled. Luckily this new race condition only triggers in the places that must already be covered by pmd_none_or_trans_huge_or_clear_bad() so the fix is localized there but this bug is not related to THP. NOTE: this can trigger on x86 32bit systems with PAE enabled with more than 4G of ram, otherwise the high part of the pmd will never risk to be truncated because it would be zero at all times, in turn so hiding the SMP race. This bug was discovered and fully debugged by Ulrich, quote: ---- [..] pmd_none_or_trans_huge_or_clear_bad() loads the content of edx and eax. 496 static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t *pmd) 497 { 498 /* depend on compiler for an atomic pmd read */ 499 pmd_t pmdval = *pmd; // edi = pmd pointer 0xc0507a74 <sys_mincore+548>: mov 0x8(%esp),%edi ... // edx = PTE page table high address 0xc0507a84 <sys_mincore+564>: mov 0x4(%edi),%edx ... // eax = PTE page table low address 0xc0507a8e <sys_mincore+574>: mov (%edi),%eax [..] Please note that the PMD is not read atomically. These are two "mov" instructions where the high order bits of the PMD entry are fetched first. Hence, the above machine code is prone to the following race. - The PMD entry {high|low} is 0x0000000000000000. The "mov" at 0xc0507a84 loads 0x00000000 into edx. - A page fault (on another CPU) sneaks in between the two "mov" instructions and instantiates the PMD. - The PMD entry {high|low} is now 0x00000003fda38067. The "mov" at 0xc0507a8e loads 0xfda38067 into eax. ---- Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-18x86: Flush TLB if PGD entry is changed in i386 PAE modeShaohua Li
According to intel CPU manual, every time PGD entry is changed in i386 PAE mode, we need do a full TLB flush. Current code follows this and there is comment for this too in the code. But current code misses the multi-threaded case. A changed page table might be used by several CPUs, every such CPU should flush TLB. Usually this isn't a problem, because we prepopulate all PGD entries at process fork. But when the process does munmap and follows new mmap, this issue will be triggered. When it happens, some CPUs keep doing page faults: http://marc.info/?l=linux-kernel&m=129915020508238&w=2 Reported-by: Yasunori Goto<y-goto@jp.fujitsu.com> Tested-by: Yasunori Goto<y-goto@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Mallick Asit K <asit.k.mallick@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm <linux-mm@kvack.org> Cc: stable <stable@kernel.org> LKML-Reference: <1300246649.2337.95.camel@sli10-conroe> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-13thp: add x86 32bit supportJohannes Weiner
Add support for transparent hugepages to x86 32bit. Share the same VM_ bitflag for VM_MAPPED_COPY. mm/nommu.c will never support transparent hugepages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-19x86: with the last user gone, remove set_pte_presentJeremy Fitzhardinge
Impact: cleanup set_pte_present() is no longer used, directly or indirectly, so remove it. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Avi Kivity <avi@redhat.com> LKML-Reference: <1237406613-2929-2-git-send-email-jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-06x86: unify pud_noneJeremy Fitzhardinge
Impact: cleanup Unify and demacro pud_none. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-06x86: unify pgd_badJeremy Fitzhardinge
Impact: cleanup Unify and demacro pgd_bad. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-06x86: unify pmd_offsetJeremy Fitzhardinge
Impact: cleanup Unify and demacro pmd_offset. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-06x86: unify pud_pageJeremy Fitzhardinge
Impact: cleanup Unify and demacro pud_page. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-06x86: unify pud_page_vaddrJeremy Fitzhardinge
Impact: cleanup Unify and demacro pud_page_vaddr. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-06x86: unify pud_presentJeremy Fitzhardinge
Impact: cleanup Unify and demacro pud_present. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-06x86: unify pte_sameJeremy Fitzhardinge
Impact: cleanup Unify and demacro pte_same. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-06x86: unify pte_noneJeremy Fitzhardinge
Impact: cleanup Unify and demacro pte_none. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2008-12-16x86: consolidate __swp_XXX() macrosJan Beulich
Impact: cleanup, code robustization The __swp_...() macros silently relied upon which bits are used for _PAGE_FILE and _PAGE_PROTNONE. After having changed _PAGE_PROTNONE in our Xen kernel to no longer overlap _PAGE_PAT, live locks and crashes were reported that could have been avoided if these macros properly used the symbolic constants. Since, as pointed out earlier, for Xen Dom0 support mainline likewise will need to eliminate the conflict between _PAGE_PAT and _PAGE_PROTNONE, this patch does all the necessary adjustments, plus it introduces a mechanism to check consistency between MAX_SWAPFILES_SHIFT and the actual encoding macros. This also fixes a latent bug in that x86-64 used a 6-bit mask in __swp_type(), and if MAX_SWAPFILES_SHIFT was increased beyond 5 in (the seemingly unrelated) linux/swap.h, this would have resulted in a collision with _PAGE_FILE. Non-PAE 32-bit code gets similarly adjusted for its pte_to_pgoff() and pgoff_to_pte() calculations. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30i386/PAE: fix pud_page()Jan Beulich
Impact: cleanup To the unsuspecting user it is quite annoying that this broken and inconsistent with x86-64 definition still exists. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-22x86: Fix ASM_X86__ header guardsH. Peter Anvin
Change header guards named "ASM_X86__*" to "_ASM_X86_*" since: a. the double underscore is ugly and pointless. b. no leading underscore violates namespace constraints. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-22x86, um: ... and asm-x86 moveAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com>