| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
primitive, which will be used in perf events ring-buffer code
- Simplify/modify rwsems on PREEMPT_RT, to address writer starvation
- Misc cleanups/fixes
* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: Correct (cmp)xchg() instrumentation
locking/x86: Define arch_try_cmpxchg_local()
locking/arch: Wire up local_try_cmpxchg()
locking/generic: Wire up local{,64}_try_cmpxchg()
locking/atomic: Add generic try_cmpxchg{,64}_local() support
locking/rwbase: Mitigate indefinite writer starvation
locking/arch: Rename all internal __xchg() names to __arch_xchg()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for hibernation
- The .rela.dyn section has been moved to the init area
- A fix for the SBI probing to allow for implementation-defined
behavior
- Various other fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: include cpufeature.h in cpufeature.c
riscv: Move .rela.dyn to the init sections
dt-bindings: riscv: explicitly mention assumption of Zicsr & Zifencei support
riscv: compat_syscall_table: Fixup compile warning
RISC-V: fixup in-flight collision with ARCH_WANT_OPTIMIZE_VMEMMAP rename
RISC-V: fix sifive and thead section mismatches in errata
RISC-V: Align SBI probe implementation with spec
riscv: mm: remove redundant parameter of create_fdt_early_page_table
riscv: Adjust dependencies of HAVE_DYNAMIC_FTRACE selection
RISC-V: Add arch functions to support hibernation/suspend-to-disk
RISC-V: mm: Enable huge page support to kernel_page_present() function
RISC-V: Factor out common code of __cpu_resume_enter()
RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function
|
|
KVM/riscv changes for 6.4
- ONE_REG interface to enable/disable SBI extensions
- Zbb extension for Guest/VM
- AIA CSR virtualization
|
|
Automation complains:
warning: symbol '__pcpu_scope_misaligned_access_speed' was not declared. Should it be static?
cpufeature.c doesn't actually include the header of the same name, as it
had not previously used anything from it.
The per-cpu variable is declared there, so include it to silence the
complaints.
Fixes: 62a31d6e38bd ("RISC-V: hwprobe: Support probing of misaligned access performance")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20230420-wound-gizzard-2b2b589d9bea@spud
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The recent introduction of relocatable kernels prepared the move of
.rela.dyn to the init section, but actually forgot to do so, so do it
here.
Before this patch: "Freeing unused kernel image (initmem) memory: 2592K"
After this patch: "Freeing unused kernel image (initmem) memory: 6288K"
The difference corresponds to the size of the .rela.dyn section:
"[42] .rela.dyn RELA ffffffff8197e798 0127f798
000000000039c660 0000000000000018 A 47 0 8"
Fixes: 559d1e45a16d ("riscv: Use --emit-relocs in order to move .rela.dyn in init")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230428120932.22735-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
../arch/riscv/kernel/compat_syscall_table.c:12:41: warning: initialized
field overwritten [-Woverride-init]
12 | #define __SYSCALL(nr, call) [nr] = (call),
| ^
../include/uapi/asm-generic/unistd.h:567:1: note: in expansion of macro
'__SYSCALL'
567 | __SYSCALL(__NR_semget, sys_semget)
Fixes: 59c10c52f573 ("riscv: compat: syscall: Add compat_sys_call_table implementation")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20230501223353.2833899-1-dfustini@baylibre.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
|
|
Lukas warned that ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP had been
renamed in the mm tree & that RISC-V would need a fixup as part of the
merge. The warning was missed however, and RISC-V is selecting the
orphaned Kconfig option.
Fixes: 89d77f71f493 ("Merge tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux")
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>.
Link: https://lore.kernel.org/linux-riscv/CAKXUXMyVeg2kQK_edKHtMD3eADrDK_PKhCSVkMrLDdYgTQQ5rg@mail.gmail.com/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230429-trilogy-jolly-12bf5c53d62d@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When CONFIG_MODULES is set, __init_or_module becomes <empty>, but when
CONFIG_MODULES is not set, __init_or_module becomes __init.
In the latter case, it causes section mismatch warnings:
WARNING: modpost: vmlinux.o: section mismatch in reference: riscv_fill_cpu_mfr_info (section: .text) -> sifive_errata_patch_func (section: .init.text)
WARNING: modpost: vmlinux.o: section mismatch in reference: riscv_fill_cpu_mfr_info (section: .text) -> thead_errata_patch_func (section: .init.text)
Fixes: bb3f89487fd9 ("RISC-V: hwprobe: Remove __init on probe_vendor_features()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230429155247.12131-1-rdunlap@infradead.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
sbi_probe_extension() is specified with "Returns 0 if the given SBI
extension ID (EID) is not available, or 1 if it is available unless
defined as any other non-zero value by the implementation."
Additionally, sbiret.value is a long. Fix the implementation to
ensure any nonzero long value is considered a success, rather
than only positive int values.
Fixes: b9dcd9e41587 ("RISC-V: Add basic support for SBI v0.2")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230427163626.101042-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
create_fdt_early_page_table() explicitly uses early_pg_dir for
32-bit fdt mapping and the pgdir parameter is redundant here.
So remove it and its caller.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: ef69d2559fe9 ("riscv: Move early dtb mapping into the fixmap region")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230426100009.685435-1-suagrfillet@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Sia Jee Heng <jeeheng.sia@starfivetech.com> says:
This series adds RISC-V Hibernation/suspend to disk support.
Low level Arch functions were created to support hibernation.
swsusp_arch_suspend() relies code from __cpu_suspend_enter() to write
cpu state onto the stack, then calling swsusp_save() to save the memory
image.
Arch specific hibernation header is implemented and is utilized by the
arch_hibernation_header_restore() and arch_hibernation_header_save()
functions. The arch specific hibernation header consists of satp, hartid,
and the cpu_resume address. The kernel built version is also need to be
saved into the hibernation image header to making sure only the same
kernel is restore when resume.
swsusp_arch_resume() creates a temporary page table that covering only
the linear map. It copies the restore code to a 'safe' page, then start to
restore the memory image. Once completed, it restores the original
kernel's page table. It then calls into __hibernate_cpu_resume()
to restore the CPU context. Finally, it follows the normal hibernation
path back to the hibernation core.
To enable hibernation/suspend to disk into RISCV, the below config
need to be enabled:
- CONFIG_HIBERNATION
- CONFIG_ARCH_HIBERNATION_HEADER
- CONFIG_ARCH_HIBERNATION_POSSIBLE
At high-level, this series includes the following changes:
1) Change suspend_save_csrs() and suspend_restore_csrs()
to public function as these functions are common to
suspend/hibernation. (patch 1)
2) Refactor the common code in the __cpu_resume_enter() function and
__hibernate_cpu_resume() function. The common code are used by
hibernation and suspend. (patch 2)
3) Enhance kernel_page_present() function to support huge page. (patch 3)
4) Add arch/riscv low level functions to support
hibernation/suspend to disk. (patch 4)
* b4-shazam-merge:
RISC-V: Add arch functions to support hibernation/suspend-to-disk
RISC-V: mm: Enable huge page support to kernel_page_present() function
RISC-V: Factor out common code of __cpu_resume_enter()
RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function
Link: https://lore.kernel.org/r/20230330064321.1008373-1-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When building allmodconfig with clang and its integrated assembler and
linking with a version of GNU ld prior to 2.36, the following link error
occurs:
riscv64-linux-gnu-ld: .init.data has both ordered [`__patchable_function_entries' in init/main.o] and unordered [`.init_array.0' in kernel/trace/trace_benchmark.o] sections
riscv64-linux-gnu-ld: final link failed: bad value
This is the same error addressed by commit 45bd8951806e ("arm64: Improve
HAVE_DYNAMIC_FTRACE_WITH_REGS selection for clang") for arm64. See that
changelog for a full description of why this error occurs with this
combination of tools.
In a similar manner as that change, restrict the
CONFIG_HAVE_DYNAMIC_FTRACE selection to combinations of tools known to
work so that there are no errors.
Link: https://github.com/ClangBuiltLinux/linux/issues/1817
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230404-riscv-dynamic-ftrace-checks-clang-v1-1-0ce296b7d423@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Low level Arch functions were created to support hibernation.
swsusp_arch_suspend() relies code from __cpu_suspend_enter() to write
cpu state onto the stack, then calling swsusp_save() to save the memory
image.
Arch specific hibernation header is implemented and is utilized by the
arch_hibernation_header_restore() and arch_hibernation_header_save()
functions. The arch specific hibernation header consists of satp, hartid,
and the cpu_resume address. The kernel built version is also need to be
saved into the hibernation image header to making sure only the same
kernel is restore when resume.
swsusp_arch_resume() creates a temporary page table that covering only
the linear map. It copies the restore code to a 'safe' page, then start
to restore the memory image. Once completed, it restores the original
kernel's page table. It then calls into __hibernate_cpu_resume()
to restore the CPU context. Finally, it follows the normal hibernation
path back to the hibernation core.
To enable hibernation/suspend to disk into RISCV, the below config
need to be enabled:
- CONFIG_HIBERNATION
- CONFIG_ARCH_HIBERNATION_HEADER
- CONFIG_ARCH_HIBERNATION_POSSIBLE
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-5-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently kernel_page_present() function doesn't support huge page
detection causes the function to mistakenly return false to the
hibernation core.
Add huge page detection to the function to solve the problem.
Fixes: 9e953cda5cdf ("riscv: Introduce huge page support for 32/64bit kernel")
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-4-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The cpu_resume() function is very similar for the suspend to disk and
suspend to ram cases. Factor out the common code into suspend_restore_csrs
macro and suspend_restore_regs macro.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-3-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently suspend_save_csrs() and suspend_restore_csrs() functions are
statically defined in the suspend.c. Change the function's attribute
to public so that the functions can be used by hibernation as well.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-2-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix a PageHighMem check in dma-coherent initialization (Doug Berger)
- clean up the coherency defaul initialiation (Jiaxun Yang)
- add cacheline to user/kernel dma-debug space dump messages (Desnes
Nunes, Geert Uytterhoeve)
- swiotlb statistics improvements (Michael Kelley)
- misc cleanups (Petr Tesarik)
* tag 'dma-mapping-6.4-2023-04-28' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Omit total_used and used_hiwater if !CONFIG_DEBUG_FS
swiotlb: track and report io_tlb_used high water marks in debugfs
swiotlb: fix debugfs reporting of reserved memory pools
swiotlb: relocate PageHighMem test away from rmem_swiotlb_setup
of: address: always use dma_default_coherent for default coherency
dma-mapping: provide CONFIG_ARCH_DMA_DEFAULT_COHERENT
dma-mapping: provide a fallback dma_default_coherent
dma-debug: Use %pa to format phys_addr_t
dma-debug: add cacheline to user/kernel space dump messages
dma-debug: small dma_debug_entry's comment and variable name updates
dma-direct: cleanup parameters to dma_direct_optimal_gfp_mask
|
|
Decrease the probability of this internal facility to be used by
driver code.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> [riscv]
Link: https://lore.kernel.org/r/20230118154450.73842-1-andrzej.hajda@intel.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for runtime detection of the Svnapot extension
- Support for Zicboz when clearing pages
- We've moved to GENERIC_ENTRY
- Support for !MMU on rv32 systems
- The linear region is now mapped via huge pages
- Support for building relocatable kernels
- Support for the hwprobe interface
- Various fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (57 commits)
RISC-V: hwprobe: Explicity check for -1 in vdso init
RISC-V: hwprobe: There can only be one first
riscv: Allow to downgrade paging mode from the command line
dt-bindings: riscv: add sv57 mmu-type
RISC-V: hwprobe: Remove __init on probe_vendor_features()
riscv: Use --emit-relocs in order to move .rela.dyn in init
riscv: Check relocations at compile time
powerpc: Move script to check relocations at compile time in scripts/
riscv: Introduce CONFIG_RELOCATABLE
riscv: Move .rela.dyn outside of init to avoid empty relocations
riscv: Prepare EFI header for relocatable kernels
riscv: Unconditionnally select KASAN_VMALLOC if KASAN
riscv: Fix ptdump when KASAN is enabled
riscv: Fix EFI stub usage of KASAN instrumented strcmp function
riscv: Move DTB_EARLY_BASE_VA to the kernel address space
riscv: Rework kasan population functions
riscv: Split early and final KASAN population functions
riscv: Use PUD/P4D/PGD pages for the linear mapping
riscv: Move the linear mapping creation in its own function
riscv: Get rid of riscv_pfn_base variable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP cross-CPU function-call updates from Ingo Molnar:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some major
architectures it's not even consistently available.
* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
trace,smp: Trace all smp_function_call*() invocations
trace: Add trace_ipi_send_cpu()
sched, smp: Trace smp callback causing an IPI
smp: reword smp call IPI comment
treewide: Trace IPIs sent via smp_send_reschedule()
irq_work: Trace self-IPIs sent via arch_irq_work_raise()
smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
sched, smp: Trace IPIs sent via send_call_function_single_ipi()
trace: Add trace_ipi_send_cpumask()
kernel/smp: Make csdlock_debug= resettable
locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
locking/csd_lock: Remove added data from CSD lock debugging
locking/csd_lock: Add Kconfig option for csd_debug default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.4
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
|
|
id_bitsmash is unsigned. We need to explicitly check for -1, rather
than use > 0.
Fixes: aa5af0aa90ba ("RISC-V: Add hwprobe vDSO function and data")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20230426141333.10063-3-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Only capture the first cpu_id in order for the comparison
below to be of any use.
Fixes: ea3de9ce8aa2 ("RISC-V: Add a syscall for HW probing")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20230426141333.10063-2-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add 2 early command line parameters that allow to downgrade satp mode
(using the same naming as x86):
- "no5lvl": use a 4-level page table (down from sv57 to sv48)
- "no4lvl": use a 3-level page table (down from sv57/sv48 to sv39)
Note that going through the device tree to get the kernel command line
works with ACPI too since the efi stub creates a device tree anyway with
the command line.
In KASAN kernels, we can't use the libfdt that early in the boot process
since we are not ready to execute instrumented functions. So instead of
using the "generic" libfdt, we compile our own versions of those functions
that are not instrumented and that are prefixed so that they do not
conflict with the generic ones. We also need the non-instrumented versions
of the string functions and the prefixed versions of memcpy/memmove.
This is largely inspired by commit aacd149b6238 ("arm64: head: avoid
relocating the kernel twice for KASLR") from which I removed compilation
flags that were not relevant to RISC-V at the moment (LTO, SCS). Also
note that we have to link with -z norelro to avoid ld.lld to throw a
warning with the new .got sections, like in commit 311bea3cb9ee ("arm64:
link with -z norelro for LLD or aarch64-elf").
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230424092313.178699-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
probe_vendor_features() is now called from smp_callin(), which is not
__init code and runs during cpu hotplug events. Remove the
__init_or_module decoration from it and the functions it calls to avoid
walking into outer space.
Fixes: 62a31d6e38bd ("RISC-V: hwprobe: Support probing of misaligned access performance")
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230420194934.1871356-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Code cleanup and dead code removal
* tag 'printk-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove obsoleted check for non-existent "user" object
lib/vsprintf: Use isodigit() for the octal number check
Remove orphaned CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are various cleanups, fixing a number of uapi header files to no
longer reference CONFIG_* symbols, and one patch that introduces the
new CONFIG_HAS_IOPORT symbol for architectures that provide working
inb()/outb() macros, as a preparation for adding driver dependencies
on those in the following release"
* tag 'asm-generic-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
Kconfig: introduce HAS_IOPORT option and select it as necessary
scripts: Update the CONFIG_* ignore list in headers_install.sh
pktcdvd: Remove CONFIG_CDROM_PKTCDVD_WCACHE from uapi header
Move bp_type_idx to include/linux/hw_breakpoint.h
Move ep_take_care_of_epollwakeup() to fs/eventpoll.c
Move COMPAT_ATM_ADDPARTY to net/atm/svc.c
|
|
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek,
NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These
all add new features for existing machines, as well as new machines
and SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1
chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its
JH7100 predecessor, but with additional CPU cores and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini gets
added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on
the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the Snapdragon
family.
Including the initial board support for the added SoC platforms, there
are 52 new machines. The largest group are 19 boards industrial
embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit)
families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X)
SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs, including
the rk3588s-khadas-edge2 and a few NanoPi models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete 'oxnas'
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the
Qualcomm Sc7180 'trogdor' design that were never part of products"
* tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits)
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
ARM: dts: nomadik: Replace deprecated spi-gpio properties
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: rockchip: add panel to Anbernic RG353 series
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relocations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they
fail to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up in
the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context of
different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource
is installed, i.e. timekeeping is still tick based and the tick
period advances from there.
The early enablement of sched_clock() broke this alignement as the
time accumulated by sched_clock() is taken into account when
timekeeping is initialized. So the base value now(CLOCK_MONOTONIC) is
not longer a multiple of tick periods, which breaks applications
which relied on that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements:
* Cure the concurrent writer race for idle and IO sleeptime
statistics
The statitic values which are exposed via /proc/stat are updated
from the CPU local idle exit and remotely by cpufreq, but that
happens without any form of serialization. As a consequence
sleeptimes can be accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
* Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race
with idle exit updates. As a consequence the readout may result
in random and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing
the remote runqueues nr_iowait counter. The latter is impossible
to fix, so the only way to deal with that is to document it
properly and to remove the assertion in the selftest which
triggers occasionally due to that.
* Restructure struct tick_sched for better cache layout
* Some small cleanups and a better cache layout for struct
tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU
timers
For unknown reason the introduction of the timer_wait_running()
callback missed to fixup posix CPU timers, which went unnoticed for
almost four years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels,
it turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled
systems there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU
timers out from hard interrupt context to task work, which is handled
before returning to user space or to a VM. The expiry mechanism moves
the expired timers to a stack local list head with sighand lock held.
Once sighand is dropped the task can be preempted and a task which
wants to delete a timer will spin-wait until the expiry task is
scheduled back in. In the worst case this will end up in a livelock
when the preempting task and the expiry task are pinned on the same
CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which
uses a per CPU timer-base expiry lock which is held by the expiry
code and the task waiting for the timer function to complete blocks
on that lock.
This does not work in the same way for posix CPU timers as there is
no timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry
lock can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry
task hold it accross the expiry function and let the deleting task
which waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra
mutex_lock()/unlock() pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents
the livelock and cures the problem for RT and !RT systems
* tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Implement the missing timer_wait_running callback
selftests/proc: Assert clock_gettime(CLOCK_BOOTTIME) VS /proc/uptime monotonicity
selftests/proc: Remove idle time monotonicity assertions
MAINTAINERS: Remove stale email address
timers/nohz: Remove middle-function __tick_nohz_idle_stop_tick()
timers/nohz: Add a comment about broken iowait counter update race
timers/nohz: Protect idle/iowait sleep time under seqcount
timers/nohz: Only ever update sleeptime from idle exit
timers/nohz: Restructure and reshuffle struct tick_sched
tick/common: Align tick period with the HZ tick.
selftests/timers/posix_timers: Test delivery of signals across threads
posix-timers: Prefer delivery of signals to the current thread
vdso: Improve cmd_vdso_check to check all dynamic relocations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt updates from Thomas Gleixner:
"Core:
- Add tracepoints for tasklet callbacks which makes it possible to
analyze individual tasklet functions instead of guess working from
the overall duration of tasklet processing
- Ensure that secondary interrupt threads have their affinity
adjusted correctly
Drivers:
- A large rework of the RISC-V IPI management to prepare for a new
RISC-V interrupt architecture
- Small fixes and enhancements all over the place
- Removal of support for various obsolete hardware platforms and the
related code"
* tag 'irq-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip/st: Remove stih415/stih416 and stid127 platforms support
irqchip/gic-v3: Add Rockchip 3588001 erratum workaround
genirq: Update affinity of secondary threads
softirq: Add trace points for tasklet entry/exit
irqchip/loongson-pch-pic: Fix pch_pic_acpi_init calling
irqchip/loongson-pch-pic: Fix registration of syscore_ops
irqchip/loongson-eiointc: Fix registration of syscore_ops
irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent
irqchip/loongson-eiointc: Fix returned value on parsing MADT
irqchip/riscv-intc: Add empty irq_eoi() for chained irq handlers
RISC-V: Use IPIs for remote icache flush when possible
RISC-V: Use IPIs for remote TLB flush when possible
RISC-V: Allow marking IPIs as suitable for remote FENCEs
RISC-V: Treat IPIs as normal Linux IRQs
irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
RISC-V: Clear SIP bit only when using SBI IPI operations
irqchip/irq-sifive-plic: Add syscore callbacks for hibernation
irqchip: Use of_property_read_bool() for boolean properties
irqchip/bcm-6345-l1: Request memory region
irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux
Pull RCU updates from Joel Fernandes:
- Updates and additions to MAINTAINERS files, with Boqun being added to
the RCU entry and Zqiang being added as an RCU reviewer.
I have also transitioned from reviewer to maintainer; however, Paul
will be taking over sending RCU pull-requests for the next merge
window.
- Resolution of hotplug warning in nohz code, achieved by fixing
cpu_is_hotpluggable() through interaction with the nohz subsystem.
Tick dependency modifications by Zqiang, focusing on fixing usage of
the TICK_DEP_BIT_RCU_EXP bitmask.
- Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
kernels, fixed by Zqiang.
- Improvements to rcu-tasks stall reporting by Neeraj.
- Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
increased robustness, affecting several components like mac802154,
drbd, vmw_vmci, tracing, and more.
A report by Eric Dumazet showed that the API could be unknowingly
used in an atomic context, so we'd rather make sure they know what
they're asking for by being explicit:
https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/
- Documentation updates, including corrections to spelling,
clarifications in comments, and improvements to the srcu_size_state
comments.
- Better srcu_struct cache locality for readers, by adjusting the size
of srcu_struct in support of SRCU usage by Christoph Hellwig.
- Teach lockdep to detect deadlocks between srcu_read_lock() vs
synchronize_srcu() contributed by Boqun.
Previously lockdep could not detect such deadlocks, now it can.
- Integration of rcutorture and rcu-related tools, targeted for v6.4
from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
module parameter, and more
- Miscellaneous changes, various code cleanups and comment improvements
* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
checkpatch: Error out if deprecated RCU API used
mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
rcu/trace: use strscpy() to instead of strncpy()
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip changes from Marc Zyngier:
- Large RISC-V IPI rework to make way for a new interrupt
architecture
- More Loongarch fixes from Lianmin Lv, fixing issues in the so
called "dual-bridge" systems.
- Workaround for the nvidia T241 chip that gets confused in
3 and 4 socket configurations, leading to the GIC
malfunctionning in some contexts
- Drop support for non-firmware driven GIC configurarations
now that the old ARM11MP Cavium board is gone
- Workaround for the Rockchip 3588 chip that doesn't
correctly deal with the shareability attributes.
- Replace uses of of_find_property() with the more appropriate
of_property_read_bool()
- Make bcm-6345-l1 request its MMIO region
- Add suspend support to the SiFive PLIC
- Drop support for stih415, stih416 and stid127 platforms
Link: https://lore.kernel.org/lkml/20230421132104.3021536-1-maz@kernel.org
|
|
The AIA specification introduce per-HART AIA CSRs which primarily
support:
* 64 local interrupts on both RV64 and RV32
* priority for each of the 64 local interrupts
* interrupt filtering for local interrupts
This patch virtualize above mentioned AIA CSRs and also extend
ONE_REG interface to allow user-space save/restore Guest/VM
view of these CSRs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
To support 64 VCPU local interrupts on RV32 host, we should use
bitmap for irqs_pending and irqs_pending_mask in struct kvm_vcpu_arch.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We implement ONE_REG interface for AIA CSRs as a separate subtype
under the CSR ONE_REG interface.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
To make the CSR ONE_REG interface extensible, we implement subtype
for the CSR ONE_REG IDs. The existing CSR ONE_REG IDs are treated
as subtype = 0 (aka General CSRs).
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
To incrementally implement AIA support, we first add minimal skeletal
support which only compiles and detects AIA hardware support at the
boot-time but does not provide any functionality.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The hgatp.VMID mask defines are used before shifting when extracting
VMID value from hgatp CSR value so based on the convention followed
in the other parts of asm/csr.h, the hgatp.VMID mask defines should
not have a _MASK suffix.
While we are here, let's use GENMASK() for hgatp.VMID and hgatp.PPN.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We have two extension names for AIA ISA support: Smaia (M-mode AIA CSRs)
and Ssaia (S-mode AIA CSRs).
We extend the ISA string parsing to detect Smaia and Ssaia extensions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The RISC-V AIA specification improves handling per-HART local interrupts
in a backward compatible manner. This patch adds defines for new RISC-V
AIA CSRs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zbb extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We add ONE_REG interface to enable/disable SBI extensions (just
like the ONE_REG interface for ISA extensions). This allows KVM
user-space to decide the set of SBI extension enabled for a Guest
and by default all SBI extensions are enabled.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
While alphabetized lists tend to become unalphabetized almost
as quickly as they get fixed up, it is preferred to keep select
lists in Kconfigs in order. Let's fix KVM's up.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Read mmu_invalidate_seq before dropping the mmap_lock so that KVM can
detect if the results of vma_lookup() (e.g. vma_shift) become stale
before it acquires kvm->mmu_lock. This fixes a theoretical bug where a
VMA could be changed by userspace after vma_lookup() and before KVM
reads the mmu_invalidate_seq, causing KVM to install page table entries
based on a (possibly) no-longer-valid vma_shift.
Re-order the MMU cache top-up to earlier in user_mem_abort() so that it
is not done after KVM has read mmu_invalidate_seq (i.e. so as to avoid
inducing spurious fault retries).
It's unlikely that any sane userspace currently modifies VMAs in such a
way as to trigger this race. And even with directed testing I was unable
to reproduce it. But a sufficiently motivated host userspace might be
able to exploit this race.
Note KVM/ARM had the same bug and was fixed in a separate, near
identical patch (see Link).
Link: https://lore.kernel.org/kvm/20230313235454.2964067-1-dmatlack@google.com/
Fixes: 9955371cc014 ("RISC-V: KVM: Implement MMU notifiers")
Cc: stable@vger.kernel.org
Signed-off-by: David Matlack <dmatlack@google.com>
Tested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Adjacent changes:
net/mptcp/protocol.h
63740448a32e ("mptcp: fix accept vs worker race")
2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alexandre Ghiti <alexghiti@rivosinc.com> says:
After multiple attempts, this patchset is now based on the fact that the
64b kernel mapping was moved outside the linear mapping.
The first patch allows to build relocatable kernels but is not selected
by default. That patch is a requirement for KASLR.
The second and third patches take advantage of an already existing powerpc
script that checks relocations at compile-time, and uses it for riscv.
* b4-shazam-merge:
riscv: Use --emit-relocs in order to move .rela.dyn in init
riscv: Check relocations at compile time
powerpc: Move script to check relocations at compile time in scripts/
riscv: Introduce CONFIG_RELOCATABLE
riscv: Move .rela.dyn outside of init to avoid empty relocations
riscv: Prepare EFI header for relocatable kernels
Link: https://lore.kernel.org/r/20230329045329.64565-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
