| Age | Commit message (Collapse) | Author |
|---|
|
The only remaining consumer is new_inode, where it showed up in 2001 as
commit c37fa164f793 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1]
with a changelog which does not mention it.
Since then the line got only touched up to keep compiling.
While it may have been of benefit back in the day, it is guaranteed to
at best not get in the way in the multicore setting -- as the code
performs *a lot* of work between the prefetch and actual lock acquire,
any contention means the cacheline is already invalid by the time the
routine calls spin_lock(). It adds spurious traffic, for short.
On top of it prefetch is notoriously tricky to use for single-threaded
purposes, making it questionable from the get go.
As such, remove it.
I admit upfront I did not see value in benchmarking this change, but I
can do it if that is deemed appropriate.
Removal from new_inode and of the entire thing are in the same patch as
requested by Linus, so whatever weird looks can be directed at that guy.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/fs/inode.c?id=c37fa164f793735b32aa3f53154ff1a7659e6442 [1]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix vmemmap altmap boundary check which could cause memory hotunplug
failure
- Create a dummy stackframe to fix ftrace stack unwind
- Fix secondary thread bringup for Book3E ELFv2 kernels
- Use early_ioremap/unmap() in via_calibrate_decr()
Thanks to Aneesh Kumar K.V, Benjamin Gray, Christophe Leroy, David
Hildenbrand, and Naveen N Rao.
* tag 'powerpc-6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powermac: Use early_* IO variants in via_calibrate_decr()
powerpc/64e: Fix secondary thread bringup for ELFv2 kernels
powerpc/ftrace: Create a dummy stackframe to fix stack unwind
powerpc/mm/altmap: Fix altmap boundary check
|
|
Compiling big-endian targets with Clang produces the diagnostic:
fs/namei.c:2173:13: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
} while (!(has_zero(a, &adata, &constants) | has_zero(b, &bdata, &constants)));
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
fs/namei.c:2173:13: note: cast one or both operands to int to silence this warning
It appears that when has_zero was introduced, two definitions were
produced with different signatures (in particular different return
types).
Looking at the usage in hash_name() in fs/namei.c, I suspect that
has_zero() is meant to be invoked twice per while loop iteration; using
logical-or would not update `bdata` when `a` did not have zeros. So I
think it's preferred to always return an unsigned long rather than a
bool than update the while loop in hash_name() to use a logical-or
rather than bitwise-or.
[ Also changed powerpc version to do the same - Linus ]
Link: https://github.com/ClangBuiltLinux/linux/issues/1832
Link: https://lore.kernel.org/lkml/20230801-bitwise-v1-1-799bec468dc4@google.com/
Fixes: 36126f8f2ed8 ("word-at-a-time: make the interfaces truly generic")
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On a powermac platform, via the call path:
start_kernel()
time_init()
ppc_md.calibrate_decr() (pmac_calibrate_decr)
via_calibrate_decr()
ioremap() and iounmap() are called. The unmap can enable interrupts
unexpectedly (cond_resched() in vunmap_pmd_range()), which causes a
warning later in the boot sequence in start_kernel().
Use the early_* variants of these IO functions to prevent this.
The issue is pre-existing, but is surfaced by commit 721255b9826b
("genirq: Use a maple tree for interrupt descriptor management").
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230706010816.72682-1-bgray@linux.ibm.com
|
|
When booting on e6500 with an ELF v2 ABI kernel, the secondary threads do
not start correctly:
[ 0.051118] smp: Bringing up secondary CPUs ...
[ 5.072700] Processor 1 is stuck.
This occurs because the startup code is written to use function
descriptors when loading the entry point for the secondary threads. When
building with ELF v2 ABI there are no function descriptors, and the code
loads junk values for the entry point address.
Fix it by using ppc_function_entry() in C, and DOTSYM() in asm, both of
which work correctly for ELF v2 ABI as well as ELF v1 ABI kernels.
Fixes: 8c5fa3b5c4df ("powerpc/64: Make ELFv2 the default for big-endian builds")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801102650.48705-1-mpe@ellerman.id.au
|
|
Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.
Get rid of it mechanically:
git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'
Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With ppc64 -mprofile-kernel and ppc32 -pg, profiling instructions to
call into ftrace are emitted right at function entry. The instruction
sequence used is minimal to reduce overhead. Crucially, a stackframe is
not created for the function being traced. This breaks stack unwinding
since the function being traced does not have a stackframe for itself.
As such, it never shows up in the backtrace:
/sys/kernel/debug/tracing # echo 1 > /proc/sys/kernel/stack_tracer_enabled
/sys/kernel/debug/tracing # cat stack_trace
Depth Size Location (17 entries)
----- ---- --------
0) 4144 32 ftrace_call+0x4/0x44
1) 4112 432 get_page_from_freelist+0x26c/0x1ad0
2) 3680 496 __alloc_pages+0x290/0x1280
3) 3184 336 __folio_alloc+0x34/0x90
4) 2848 176 vma_alloc_folio+0xd8/0x540
5) 2672 272 __handle_mm_fault+0x700/0x1cc0
6) 2400 208 handle_mm_fault+0xf0/0x3f0
7) 2192 80 ___do_page_fault+0x3e4/0xbe0
8) 2112 160 do_page_fault+0x30/0xc0
9) 1952 256 data_access_common_virt+0x210/0x220
10) 1696 400 0xc00000000f16b100
11) 1296 384 load_elf_binary+0x804/0x1b80
12) 912 208 bprm_execve+0x2d8/0x7e0
13) 704 64 do_execveat_common+0x1d0/0x2f0
14) 640 160 sys_execve+0x54/0x70
15) 480 64 system_call_exception+0x138/0x350
16) 416 416 system_call_common+0x160/0x2c4
Fix this by having ftrace create a dummy stackframe for the function
being traced. With this, backtraces now capture the function being
traced:
/sys/kernel/debug/tracing # cat stack_trace
Depth Size Location (17 entries)
----- ---- --------
0) 3888 32 _raw_spin_trylock+0x8/0x70
1) 3856 576 get_page_from_freelist+0x26c/0x1ad0
2) 3280 64 __alloc_pages+0x290/0x1280
3) 3216 336 __folio_alloc+0x34/0x90
4) 2880 176 vma_alloc_folio+0xd8/0x540
5) 2704 416 __handle_mm_fault+0x700/0x1cc0
6) 2288 96 handle_mm_fault+0xf0/0x3f0
7) 2192 48 ___do_page_fault+0x3e4/0xbe0
8) 2144 192 do_page_fault+0x30/0xc0
9) 1952 608 data_access_common_virt+0x210/0x220
10) 1344 16 0xc0000000334bbb50
11) 1328 416 load_elf_binary+0x804/0x1b80
12) 912 64 bprm_execve+0x2d8/0x7e0
13) 848 176 do_execveat_common+0x1d0/0x2f0
14) 672 192 sys_execve+0x54/0x70
15) 480 64 system_call_exception+0x138/0x350
16) 416 416 system_call_common+0x160/0x2c4
This results in two additional stores in the ftrace entry code, but
produces reliable backtraces.
Fixes: 153086644fd1 ("powerpc/ftrace: Add support for -mprofile-kernel ftrace ABI")
Cc: stable@vger.kernel.org
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230621051349.759567-1-naveen@kernel.org
|
|
altmap->free includes the entire free space from which altmap blocks
can be allocated. So when checking whether the kernel is doing altmap
block free, compute the boundary correctly, otherwise memory hotunplug
can fail.
Fixes: 9ef34630a461 ("powerpc/mm: Fallback to RAM if the altmap is unusable")
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230724181320.471386-1-aneesh.kumar@linux.ibm.com
|
|
This reverts commit 606787fed7268feb256957872586370b56af697a.
ELFv1 with LE has never been a thing, and people who try to make ELFv1 LE
binaries are maniacs who need to be stopped, but unfortunately there are
ELFv1 LE binaries out there in the wild.
One such binary is the ppc64el (as Debian calls it) helper for
arch-test[0], a tool for detecting architectures that can be executed on a
given machine by means of attempting to execute helper binaries compiled
for each architecture and seeing which binaries succeed and fail. The
helpers are small snippets of assembly, and the ppc64el assembly doesn't
include the right directives to generate an ELFv2 binary.
This results in arch-test incorrectly determining that a ppc64el kernel
can't execute a ppc64el userspace, which in turn means that a number of
developer tools such as debootstrap will break (assuming arch-test is
installed).
[0] https://github.com/kilobyte/arch-test
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230719071821.320594-1-ajd@linux.ibm.com
|
|
As per the generic KASAN code in mm/kasan, disable KCOV with
KCOV_INSTRUMENT := n in the makefile.
This fixes a ppc64 boot hang when KCOV and KASAN are enabled.
kasan_early_init() gets called before a PACA is initialised, but the
KCOV hook expects a valid PACA.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230710044143.146840-1-bgray@linux.ibm.com
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230711143145.1192651-1-u.kleine-koenig@pengutronix.de
|
|
aesp10-ppc.S and ghashp10-ppc.S are autogenerated and not tracked by
git, so they should be ignored. This is doing the same as the P8 files
in drivers/crypto/vmx/.gitignore but for the P10 files in
arch/powerpc/crypto.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230713042206.85669-1-ruscur@russell.cc
|
|
with asm goto"
This partly reverts commit 1e688dd2a3d6759d416616ff07afc4bb836c4213.
That commit aimed at optimising the code around generation of
WARN_ON/BUG_ON but this leads to a lot of dead code erroneously
generated by GCC.
That dead code becomes a problem when we start using objtool validation
because objtool will abort validation with a warning as soon as it
detects unreachable code. This is because unreachable code might
be the indication that objtool doesn't properly decode object text.
text data bss dec hex filename
9551585 3627834 224376 13403795 cc8693 vmlinux.before
9535281 3628358 224376 13388015 cc48ef vmlinux.after
Once this change is reverted, in a standard configuration (pmac32 +
function tracer) the text is reduced by 16k which is around 1.7%
We already had problem with it when starting to use objtool on powerpc
as a replacement for recordmcount, see commit 93e3f45a2631 ("powerpc:
Fix __WARN_FLAGS() for use with Objtool")
There is also a problem with at least GCC 12, on ppc64_defconfig +
CONFIG_CC_OPTIMIZE_FOR_SIZE=y + CONFIG_DEBUG_SECTION_MISMATCH=y :
LD .tmp_vmlinux.kallsyms1
powerpc64-linux-ld: net/ipv4/tcp_input.o:(__ex_table+0xc4): undefined reference to `.L2136'
make[2]: *** [scripts/Makefile.vmlinux:36: vmlinux] Error 1
make[1]: *** [/home/chleroy/linux-powerpc/Makefile:1238: vmlinux] Error 2
Taking into account that other problems are encountered with that
'asm goto' in WARN_ON(), including build failures, keeping that
change is not worth it allthough it is primarily a compiler bug.
Revert it for now.
mpe: Retain EMIT_WARN_ENTRY as a synonym for EMIT_BUG_ENTRY to reduce
churn, as there are now nearly as many uses of EMIT_WARN_ENTRY as
EMIT_BUG_ENTRY.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230712134552.534955-1-mpe@ellerman.id.au
|
|
Commit 8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR
core removal") unmaps the window paste address and issues HCALL to
close window in the hypervisor for migration or DLPAR core removal
events. So holds mmap_mutex and then mmap lock before unmap the
paste address. But if the user space issue mmap paste address at
the same time with the migration event, coproc_mmap() is called
after holding the mmap lock which can trigger deadlock when trying
to acquire mmap_mutex in coproc_mmap().
t1: mmap() call to mmap t2: Migration event
window paste address
do_mmap2() migration_store()
ksys_mmap_pgoff() pseries_migrate_partition()
vm_mmap_pgoff() vas_migration_handler()
Acquire mmap lock reconfig_close_windows()
do_mmap() lock mmap_mutex
mmap_region() Acquire mmap lock
call_mmap() //Wait for mmap lock
coproc_mmap() unmap vma
lock mmap_mutex update window status
//wait for mmap_mutex Release mmap lock
mmap vma unlock mmap_mutex
update window status
unlock mmap_mutex
...
Release mmap lock
Fix this deadlock issue by holding mmap lock first before mmap_mutex
in reconfig_close_windows().
Fixes: 8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR core removal")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230716100506.7833-1-haren@linux.ibm.com
|
|
With commit 0d940a9b270b ("mm/pgtable: allow pte_offset_map[_lock]() to
fail") the kernel is now using pmd_same to compare pmd values that are
pointing to a level 4 page table page. Move the functions out of #ifdef
CONFIG_TRANSPARENT_HUGEPAGE and add a variant that can work with both 4K
and 64K page size.
kernel BUG at arch/powerpc/include/asm/book3s/64/hash-4k.h:141!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
.....
NIP [c00000000048aee0] __pte_offset_map_lock+0xf0/0x164
LR [c00000000048ae78] __pte_offset_map_lock+0x88/0x164
Call Trace:
0xc0003f000009a340 (unreliable)
__handle_mm_fault+0x1340/0x1980
handle_mm_fault+0xbc/0x380
__get_user_pages+0x320/0x550
get_user_pages_remote+0x13c/0x520
get_arg_page+0x80/0x1d0
copy_string_kernel+0xc8/0x250
kernel_execve+0x11c/0x270
run_init_process+0xe4/0x10c
kernel_init+0xbc/0x1a0
ret_from_kernel_user_thread+0x14/0x1c
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230706022405.798157-1-aneesh.kumar@linux.ibm.com
|
|
Since commit aec0ba7472a7 ("powerpc/64: Use -mprofile-kernel for big
endian ELFv2 kernels"), this file is checked by objtool. Fix warnings
such as:
arch/powerpc/kernel/idle_64e.o: warning: objtool: .text+0x20: unannotated intra-function call
arch/powerpc/kernel/exceptions-64e.o: warning: objtool: .text+0x218: unannotated intra-function call
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230622112451.735268-1-mpe@ellerman.id.au
|
|
Nageswara reported that /proc/self/status was showing "vulnerable" for
the Speculation_Store_Bypass feature on Power10, eg:
$ grep Speculation_Store_Bypass: /proc/self/status
Speculation_Store_Bypass: vulnerable
But at the same time the sysfs files, and lscpu, were showing "Not
affected".
This turns out to simply be a bug in the reporting of the
Speculation_Store_Bypass, aka. PR_SPEC_STORE_BYPASS, case.
When SEC_FTR_STF_BARRIER was added, so that firmware could communicate
the vulnerability was not present, the code in ssb_prctl_get() was not
updated to check the new flag.
So add the check for SEC_FTR_STF_BARRIER being disabled. Rather than
adding the new check to the existing if block and expanding the comment
to cover both cases, rewrite the three cases to be separate so they can
be commented separately for clarity.
Fixes: 84ed26fd00c5 ("powerpc/security: Add a security feature for STF barrier")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230517074945.53188-1-mpe@ellerman.id.au
|
|
Lockdep warns that the use of the hpte_lock in native_hpte_remove() is
not safe against an IRQ coming in:
================================
WARNING: inconsistent lock state
6.4.0-rc2-g0c54f4d30ecc #1 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
qemu-system-ppc/93865 [HC0[0]:SC0[0]:HE1:SE1] takes:
c0000000021f5180 (hpte_lock){+.?.}-{0:0}, at: native_lock_hpte+0x8/0xd0
{IN-SOFTIRQ-W} state was registered at:
lock_acquire+0x134/0x3f0
native_lock_hpte+0x44/0xd0
native_hpte_insert+0xd4/0x2a0
__hash_page_64K+0x218/0x4f0
hash_page_mm+0x464/0x840
do_hash_fault+0x11c/0x260
data_access_common_virt+0x210/0x220
__ip_select_ident+0x140/0x150
...
net_rx_action+0x3bc/0x440
__do_softirq+0x180/0x534
...
sys_sendmmsg+0x34/0x50
system_call_exception+0x128/0x320
system_call_common+0x160/0x2e4
...
Possible unsafe locking scenario:
CPU0
----
lock(hpte_lock);
<Interrupt>
lock(hpte_lock);
*** DEADLOCK ***
...
Call Trace:
dump_stack_lvl+0x98/0xe0 (unreliable)
print_usage_bug.part.0+0x250/0x278
mark_lock+0xc9c/0xd30
__lock_acquire+0x440/0x1ca0
lock_acquire+0x134/0x3f0
native_lock_hpte+0x44/0xd0
native_hpte_remove+0xb0/0x190
kvmppc_mmu_map_page+0x650/0x698 [kvm_pr]
kvmppc_handle_pagefault+0x534/0x6e8 [kvm_pr]
kvmppc_handle_exit_pr+0x6d8/0xe90 [kvm_pr]
after_sprg3_load+0x80/0x90 [kvm_pr]
kvmppc_vcpu_run_pr+0x108/0x270 [kvm_pr]
kvmppc_vcpu_run+0x34/0x48 [kvm]
kvm_arch_vcpu_ioctl_run+0x340/0x470 [kvm]
kvm_vcpu_ioctl+0x338/0x8b8 [kvm]
sys_ioctl+0x7c4/0x13e0
system_call_exception+0x128/0x320
system_call_common+0x160/0x2e4
I suspect kvm_pr is the only caller that doesn't already have IRQs
disabled, which is why this hasn't been reported previously.
Fix it by disabling IRQs in native_hpte_remove().
Fixes: 35159b5717fa ("powerpc/64s: make HPTE lock and native_tlbie_lock irq-safe")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230517123033.18430-1-mpe@ellerman.id.au
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix PCIe MEM size for pci2 node on Turris 1.x boards
- Two minor build fixes
Thanks to Christophe Leroy, Douglas Anderson, Pali Rohár, Petr Mladek,
and Randy Dunlap.
* tag 'powerpc-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: dts: turris1x.dts: Fix PCIe MEM size for pci2 node
powerpc: Include asm/nmi.c in mobility.c for watchdog_hardlockup_set_timeout_pct()
powerpc: allow PPC_EARLY_DEBUG_CPM only when SERIAL_CPM=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty/serial driver updates for 6.5-rc1.
Included in here are:
- tty_audit code cleanups from Jiri
- more 8250 cleanups from Ilpo
- samsung_tty driver bugfixes
- 8250 lock port updates
- usual fsl_lpuart driver updates and fixes
- other small serial driver fixes and updates, full details in the
shortlog
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
tty_audit: make data of tty_audit_log() const
tty_audit: make tty pointers in exposed functions const
tty_audit: make icanon a bool
tty_audit: invert the condition in tty_audit_log()
tty_audit: use kzalloc() in tty_audit_buf_alloc()
tty_audit: use TASK_COMM_LEN for task comm
Revert "8250: add support for ASIX devices with a FIFO bug"
serial: atmel: don't enable IRQs prematurely
tty: serial: Add Nuvoton ma35d1 serial driver support
tty: serial: fsl_lpuart: add earlycon for imx8ulp platform
tty: serial: imx: fix rs485 rx after tx
selftests: tty: add selftest for tty timestamp updates
tty: tty_io: update timestamps on all device nodes
tty: fix hang on tty device with no_room set
serial: core: fix -EPROBE_DEFER handling in init
serial: 8250_omap: Use force_suspend and resume for system suspend
tty: serial: samsung_tty: Use abs() to simplify some code
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
...
|
|
Freescale PCIe controllers on their PCIe Root Ports do not have any
mappable PCI BAR allocate from PCIe MEM.
Information about 1MB window on BAR0 of PCIe Root Port was misleading
because Freescale PCIe controllers have at BAR0 position different register
PEXCSRBAR, and kernel correctly skipts BAR0 for these Freescale PCIe Root
Ports.
So update comment about P2020 PCIe Root Port and decrease PCIe MEM size
required for PCIe controller (pci2 node) on which is on-board xHCI
controller.
lspci confirms that on P2020 PCIe Root Port is no PCI BAR and /proc/iomem
sees that only c0000000-c000ffff and c0010000-c0011fff ranges are used.
Fixes: 54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230505172818.18416-1-pali@kernel.org
|
|
watchdog_hardlockup_set_timeout_pct()
The powerpc/platforms/pseries/mobility.c calls
watchdog_hardlockup_set_timeout_pct(), which is declared in
<asm/nmi.h>. We used to automatically get <asm/nmi.h> included, but
that changed as of commit 7ca8fe94aa92 ("watchdog/hardlockup: define
HARDLOCKUP_DETECTOR_ARCH"). Let's add the explicit include.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/r/af19b76d-aa4b-6c88-9cac-eae4b2072497@infradead.org
Fixes: 7ca8fe94aa92 ("watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230629124500.1.I55e2f4e7903d686c4484cb23c033c6a9e1a9d4c4@changeid
|
|
In a randconfig with CONFIG_SERIAL_CPM=m and
CONFIG_PPC_EARLY_DEBUG_CPM=y, there is a build error:
ERROR: modpost: "udbg_putc" [drivers/tty/serial/cpm_uart/cpm_uart.ko] undefined!
Prevent the build error by allowing PPC_EARLY_DEBUG_CPM only when
SERIAL_CPM=y.
Fixes: c374e00e17f1 ("[POWERPC] Add early debug console for CPM serial ports.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230701054714.30512-1-rdunlap@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the deprecated rule to build *.dtbo from *.dts
- Refactor section mismatch detection in modpost
- Fix bogus ARM section mismatch detections
- Fix error of 'make gtags' with O= option
- Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error
with the latest LLVM version
- Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed
- Ignore more compiler-generated symbols for kallsyms
- Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles
- Enable more kernel-doc warnings with W=2
- Refactor <linux/export.h> by generating KSYMTAB data by modpost
- Deprecate <asm/export.h> and <asm-generic/export.h>
- Remove the EXPORT_DATA_SYMBOL macro
- Move the check for static EXPORT_SYMBOL back to modpost, which makes
the build faster
- Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm
- Warn missing MODULE_DESCRIPTION when building modules with W=1
- Make 'make clean' robust against too long argument error
- Exclude more objects from GCOV to fix CFI failures with GCOV
- Allow 'make modules_install' to install modules.builtin and
modules.builtin.modinfo even when CONFIG_MODULES is disabled
- Include modules.builtin and modules.builtin.modinfo in the
linux-image Debian package even when CONFIG_MODULES is disabled
- Revive "Entering directory" logging for the latest Make version
* tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (72 commits)
modpost: define more R_ARM_* for old distributions
kbuild: revive "Entering directory" for Make >= 4.4.1
kbuild: set correct abs_srctree and abs_objtree for package builds
scripts/mksysmap: Ignore prefixed KCFI symbols
kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb
kbuild: builddeb: always make modules_install, to install modules.builtin*
modpost: continue even with unknown relocation type
modpost: factor out Elf_Sym pointer calculation to section_rel()
modpost: factor out inst location calculation to section_rel()
kbuild: Disable GCOV for *.mod.o
kbuild: Fix CFI failures with GCOV
kbuild: make clean rule robust against too long argument error
script: modpost: emit a warning when the description is missing
kbuild: make modules_install copy modules.builtin(.modinfo)
linux/export.h: rename 'sec' argument to 'license'
modpost: show offset from symbol for section mismatch warnings
modpost: merge two similar section mismatch warnings
kbuild: implement CONFIG_TRIM_UNUSED_KSYMS without recursion
modpost: use null string instead of NULL pointer for default namespace
modpost: squash sym_update_namespace() into sym_add_exported()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Export pcie_retrain_link() for use outside ASPM
- Add Data Link Layer Link Active Reporting as another way for
pcie_retrain_link() to determine the link is up
- Work around link training failures (especially on the ASMedia
ASM2824 switch) by training first at 2.5GT/s and then attempting
higher rates
Resource management:
- When we coalesce host bridge windows, remove invalidated resources
from the resource tree so future allocations work correctly
Hotplug:
- Cancel bringup sequence if card is not present, to keep from
blinking Power Indicator indefinitely
- Reassign bridge resources if necessary for ACPI hotplug
Driver binding:
- Convert platform_device .remove() callbacks to return void instead
of a mostly useless int
Power management:
- Reduce wait time for secondary bus to be ready to speed up resume
- Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
D3cold
- Call _REG when transitioning D-states so AML that uses the PCI
config space OpRegion works, which fixes some ASMedia GPIO
controllers after resume
Virtualization:
- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
hang when guest is rebooted
- Add function 1 DMA alias quirk for Marvell 88SE9235
Error handling:
- Unexport pci_save_aer_state() since it's only used in drivers/pci/
- Drop recommendation for drivers to configure AER Capability, since
the PCI core does this for all devices
ASPM:
- Disable ASPM on MFD function removal to avoid use-after-free
- Tighten up pci_enable_link_state() and pci_disable_link_state()
interfaces so they don't enable/disable states the driver didn't
specify
- Avoid link retraining race that can happen if ASPM sets link
control parameters while the link is in the midst of training for
some other reason
Endpoint framework:
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
different from "PCI Endpoint NTB driver"
- Automatically create a function specific attributes group for
endpoint drivers to avoid reference counting issues
- Fix many EPC test issues
- Return pci_epf_type_add_cfs() error if EPF has no driver
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
MSI vector parameters
- Pass EPF device ID to driver probe functions
- Return -EALREADY if EPC has already been started/stopped
- Add linkdown notifier support and use it in qcom-ep
- Add Bus Master Enable event support and use it in qcom-ep
- Add Qualcomm Modem Host Interface (MHI) endpoint driver
- Add Layerscape PME interrupt handling to manage link-up
notification
Cadence PCIe controller driver:
- Wait for link retrain to complete when working around the J721E
i2085 erratum with Gen2 mode
Faraday FTPC100 PCI controller driver:
- Release clock resources on error paths
Freescale i.MX6 PCIe controller driver:
- Save and restore Root Port MSI control to work around hardware defect
Intel VMD host bridge driver:
- Reset VMD config register between soft reboots
- Capture pci_reset_bus() return value instead of printing junk when
it fails
Qualcomm PCIe controller driver:
- Add SDX65 endpoint compatible string to DT binding
- Disable register write access after init for IP v2.3.3, v2.9.0
- Use DWC helpers for enabling/disabling writes to DBI registers
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0
- Reuse v2.3.2 post-init sequence for v2.4.0
Renesas R-Car PCIe controller driver:
- Remove unused static pcie_base and pcie_dev
Rockchip PCIe controller driver:
- Remove writes to unused registers
- Write endpoint Device ID using correct register
- Assert PCI Configuration Enable bit after probe so endpoint
responds instead of generating Request Retry Status messages
- Poll waiting for PHY PLLs to lock
- Update RK3399 example DT binding to be valid
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message
- Use multiple windows to avoid address translation conflicts
- Use u32 (not u16) when accessing 32-bit registers
- Hide MSI-X Capability, since RK3399 can't generate MSI-X
- Set endpoint controller required alignment to 256
Synopsys DesignWare PCIe controller driver:
- Wait for link to come up only if we've initiated link training
Miscellaneous:
- Add pci_clear_master() stub for non-CONFIG_PCI"
* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
Documentation: PCI: correct spelling
PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations
- Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and
use the -mprofile-kernel option (kernel specific ftrace ABI) for big
endian ELFv2 kernels
- Add initial Dynamic Execution Control Register (DEXCR) support, and
allow the ROP protection instructions to be used on Power 10
- Various other small features and fixes
Thanks to Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean
Delvare, Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry,
Nathan Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul
Gortmaker, Randy Dunlap, Rob Herring, Rohan McLure, Russell Currey,
Sachin Sant, Timothy Pearson, Tom Rix, and Uwe Kleine-König.
* tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (76 commits)
powerpc: remove checks for binutils older than 2.25
powerpc: Fail build if using recordmcount with binutils v2.37
powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory
powerpc/iommu: Only build sPAPR access functions on pSeries
powerpc: powernv: Annotate data races in opal events
powerpc: Mark writes registering ipi to host cpu through kvm and polling
powerpc: Annotate accesses to ipi message flags
powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention
powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid
powerpc: qspinlock: Enforce qnode writes prior to publishing to queue
powerpc: qspinlock: Mark accesses to qnode lock checks
powerpc/powernv/pci: Remove last IODA1 defines
powerpc/powernv/pci: Remove MVE code
powerpc/powernv/pci: Remove ioda1 support
powerpc: 52xx: Make immr_id DT match tables static
powerpc: mpc512x: Remove open coded "ranges" parsing
powerpc: fsl_soc: Use of_range_to_resource() for "ranges" parsing
powerpc: fsl: Use of_property_read_reg() to parse "reg"
powerpc: fsl_rio: Use of_range_to_resource() for "ranges" parsing
macintosh: Use of_property_read_reg() to parse "reg"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- iova_magazine_alloc() optimization
- Make flush-queue an IOMMU driver capability
- Consolidate the error handling around device attachment
AMD IOMMU changes:
- AVIC Interrupt Remapping Improvements
- Some minor fixes and cleanups
Intel VT-d changes from Lu Baolu:
- Small and misc cleanups
ARM-SMMU changes from Will Deacon:
- Device-tree binding updates:
- Add missing clocks for SC8280XP and SA8775 Adreno SMMUs
- Add two new Qualcomm SMMUs in SDX75 and SM6375
- Workarounds for Arm MMU-700 errata:
- 1076982: Avoid use of SEV-based cmdq wakeup
- 2812531: Terminate command batches with a CMD_SYNC
- Enforce single-stage translation to avoid nesting-related errata
- Set the correct level hint for range TLB invalidation on teardown
.. and some other minor fixes and cleanups (including Freescale PAMU
and virtio-iommu changes)"
* tag 'iommu-updates-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (50 commits)
iommu/vt-d: Remove commented-out code
iommu/vt-d: Remove two WARN_ON in domain_context_mapping_one()
iommu/vt-d: Handle the failure case of dmar_reenable_qi()
iommu/vt-d: Remove unnecessary (void*) conversions
iommu/amd: Remove extern from function prototypes
iommu/amd: Use BIT/BIT_ULL macro to define bit fields
iommu/amd: Fix DTE_IRQ_PHYS_ADDR_MASK macro
iommu/amd: Fix compile error for unused function
iommu/amd: Improving Interrupt Remapping Table Invalidation
iommu/amd: Do not Invalidate IRT when IRTE caching is disabled
iommu/amd: Introduce Disable IRTE Caching Support
iommu/amd: Remove the unused struct amd_ir_data.ref
iommu/amd: Switch amd_iommu_update_ga() to use modify_irte_ga()
iommu/arm-smmu-v3: Set TTL invalidation hint better
iommu/arm-smmu-v3: Document nesting-related errata
iommu/arm-smmu-v3: Add explicit feature for nesting
iommu/arm-smmu-v3: Document MMU-700 erratum 2812531
iommu/arm-smmu-v3: Work around MMU-600 erratum 1076982
dt-bindings: arm-smmu: Add SDX75 SMMU compatible
dt-bindings: arm-smmu: Add SM6375 GPU SMMU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLAB deprecation:
Following the discussion at LSF/MM 2023 [1] and no objections, the
SLAB allocator is deprecated by renaming the config option (to make
its users notice) to CONFIG_SLAB_DEPRECATED with updated help text.
SLUB should be used instead. Existing defconfigs with CONFIG_SLAB are
also updated.
- SLAB_NO_MERGE kmem_cache flag (Jesper Dangaard Brouer):
There are (very limited) cases where kmem_cache merging is
undesirable, and existing ways to prevent it are hacky. Introduce a
new flag to do that cleanly and convert the existing hacky users.
Btrfs plans to use this for debug kernel builds (that use case is
always fine), networking for performance reasons (that should be very
rare).
- Replace the usage of weak PRNGs (David Keisar Schmidt):
In addition to using stronger RNGs for the security related features,
the code is a bit cleaner.
- Misc code cleanups (SeongJae Parki, Xiongwei Song, Zhen Lei, and
zhaoxinchao)
Link: https://lwn.net/Articles/932201/ [1]
* tag 'slab-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab_common: use SLAB_NO_MERGE instead of negative refcount
mm/slab: break up RCU readers on SLAB_TYPESAFE_BY_RCU example code
mm/slab: add a missing semicolon on SLAB_TYPESAFE_BY_RCU example code
mm/slab_common: reduce an if statement in create_cache()
mm/slab: introduce kmem_cache flag SLAB_NO_MERGE
mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
mm/slab: remove HAVE_HARDENED_USERCOPY_ALLOCATOR
mm/slab_common: Replace invocation of weak PRNG
mm/slab: Replace invocation of weak PRNG
slub: Don't read nr_slabs and total_objects directly
slub: Remove slabs_node() function
slub: Remove CONFIG_SMP defined check
slub: Put objects_show() into CONFIG_SLUB_DEBUG enabled block
slub: Correct the error code when slab_kset is NULL
mm/slab: correct return values in comment for _kmem_cache_create()
|
|
Pull drm updates from Dave Airlie:
"There is one set of patches to misc for a i915 gsc/mei proxy driver.
Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
of refactoring.
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var
clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware.
This can be used to distinguish between pci link down and firmware
getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer
platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795"
* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
drm/i915: Fix a NULL vs IS_ERR() bug
drm/i915: make i915_drm_client_fdinfo() reference conditional again
drm/i915/huc: Fix missing error code in intel_huc_init()
drm/i915/gsc: take a wakeref for the proxy-init-completion check
drm/msm/a6xx: Add A610 speedbin support
drm/msm/a6xx: Add A619_holi speedbin support
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
drm/msm/a6xx: Fix some A619 tunables
drm/msm/a6xx: Add A610 support
drm/msm/a6xx: Add support for A619_holi
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
drm/msm/a6xx: Introduce GMU wrapper support
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
drm/msm/a6xx: Extend and explain UBWC config
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
drm/msm/a6xx: Add a helper for software-resetting the GPU
drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
...
|
|
This modifies our user mode stack expansion code to always take the
mmap_lock for writing before modifying the VM layout.
It's actually something we always technically should have done, but
because we didn't strictly need it, we were being lazy ("opportunistic"
sounds so much better, doesn't it?) about things, and had this hack in
place where we would extend the stack vma in-place without doing the
proper locking.
And it worked fine. We just needed to change vm_start (or, in the case
of grow-up stacks, vm_end) and together with some special ad-hoc locking
using the anon_vma lock and the mm->page_table_lock, it all was fairly
straightforward.
That is, it was all fine until Ruihan Li pointed out that now that the
vma layout uses the maple tree code, we *really* don't just change
vm_start and vm_end any more, and the locking really is broken. Oops.
It's not actually all _that_ horrible to fix this once and for all, and
do proper locking, but it's a bit painful. We have basically three
different cases of stack expansion, and they all work just a bit
differently:
- the common and obvious case is the page fault handling. It's actually
fairly simple and straightforward, except for the fact that we have
something like 24 different versions of it, and you end up in a maze
of twisty little passages, all alike.
- the simplest case is the execve() code that creates a new stack.
There are no real locking concerns because it's all in a private new
VM that hasn't been exposed to anybody, but lockdep still can end up
unhappy if you get it wrong.
- and finally, we have GUP and page pinning, which shouldn't really be
expanding the stack in the first place, but in addition to execve()
we also use it for ptrace(). And debuggers do want to possibly access
memory under the stack pointer and thus need to be able to expand the
stack as a special case.
None of these cases are exactly complicated, but the page fault case in
particular is just repeated slightly differently many many times. And
ia64 in particular has a fairly complicated situation where you can have
both a regular grow-down stack _and_ a special grow-up stack for the
register backing store.
So to make this slightly more manageable, the bulk of this series is to
first create a helper function for the most common page fault case, and
convert all the straightforward architectures to it.
Thus the new 'lock_mm_and_find_vma()' helper function, which ends up
being used by x86, arm, powerpc, mips, riscv, alpha, arc, csky, hexagon,
loongarch, nios2, sh, sparc32, and xtensa. So we not only convert more
than half the architectures, we now have more shared code and avoid some
of those twisty little passages.
And largely due to this common helper function, the full diffstat of
this series ends up deleting more lines than it adds.
That still leaves eight architectures (ia64, m68k, microblaze, openrisc,
parisc, s390, sparc64 and um) that end up doing 'expand_stack()'
manually because they are doing something slightly different from the
normal pattern. Along with the couple of special cases in execve() and
GUP.
So there's a couple of patches that first create 'locked' helper
versions of the stack expansion functions, so that there's a obvious
path forward in the conversion. The execve() case is then actually
pretty simple, and is a nice cleanup from our old "grow-up stackls are
special, because at execve time even they grow down".
The #ifdef CONFIG_STACK_GROWSUP in that code just goes away, because
it's just more straightforward to write out the stack expansion there
manually, instead od having get_user_pages_remote() do it for us in some
situations but not others and have to worry about locking rules for GUP.
And the final step is then to just convert the remaining odd cases to a
new world order where 'expand_stack()' is called with the mmap_lock held
for reading, but where it might drop it and upgrade it to a write, only
to return with it held for reading (in the success case) or with it
completely dropped (in the failure case).
In the process, we remove all the stack expansion from GUP (where
dropping the lock wouldn't be ok without special rules anyway), and add
it in manually to __access_remote_vm() for ptrace().
Thanks to Adrian Glaubitz and Frank Scheiner who tested the ia64 cases.
Everything else here felt pretty straightforward, but the ia64 rules for
stack expansion are really quite odd and very different from everything
else. Also thanks to Vegard Nossum who caught me getting one of those
odd conditions entirely the wrong way around.
Anyway, I think I want to actually move all the stack expansion code to
a whole new file of its own, rather than have it split up between
mm/mmap.c and mm/memory.c, but since this will have to be backported to
the initial maple tree vma introduction anyway, I tried to keep the
patches _fairly_ minimal.
Also, while I don't think it's valid to expand the stack from GUP, the
final patch in here is a "warn if some crazy GUP user wants to try to
expand the stack" patch. That one will be reverted before the final
release, but it's left to catch any odd cases during the merge window
and release candidates.
Reported-by: Ruihan Li <lrh2000@pku.edu.cn>
* branch 'expand-stack':
gup: add warning if some caller would seem to want stack expansion
mm: always expand the stack with the mmap write lock held
execve: expand new process stack manually ahead of time
mm: make find_extend_vma() fail if write lock not held
powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma()
mm/fault: convert remaining simple cases to lock_mm_and_find_vma()
arm/mm: Convert to using lock_mm_and_find_vma()
riscv/mm: Convert to using lock_mm_and_find_vma()
mips/mm: Convert to using lock_mm_and_find_vma()
powerpc/mm: Convert to using lock_mm_and_find_vma()
arm64/mm: Convert to using lock_mm_and_find_vma()
mm: make the page fault mmap locking killable
mm: introduce new 'lock_mm_and_find_vma()' page fault helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
directories
- Douglas Anderson has added a new "buddy" mode to the hardlockup
detector. It permits the detector to work on architectures which
cannot provide the required interrupts, by having CPUs periodically
perform checks on other CPUs
- Zhen Lei has enhanced kexec's ability to support two crash regions
- Petr Mladek has done a lot of cleanup on the hard lockup detector's
Kconfig entries
- And the usual bunch of singleton patches in various places
* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
kernel/time/posix-stubs.c: remove duplicated include
ocfs2: remove redundant assignment to variable bit_off
watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
devres: show which resource was invalid in __devm_ioremap_resource()
watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
watchdog/hardlockup: make the config checks more straightforward
watchdog/hardlockup: sort hardlockup detector related config values a logical way
watchdog/hardlockup: move SMP barriers from common code to buddy code
watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull ordered workqueue creation updates from Tejun Heo:
"For historical reasons, unbound workqueues with max concurrency limit
of 1 are considered ordered, even though the concurrency limit hasn't
been system-wide for a long time.
This creates ambiguity around whether ordered execution is actually
required for correctness, which was actually confusing for e.g. btrfs
(btrfs updates are being routed through the btrfs tree).
There aren't that many users in the tree which use the combination and
there are pending improvements to unbound workqueue affinity handling
which will make inadvertent use of ordered workqueue a bigger loss.
This clarifies the situation for most of them by updating the ones
which require ordered execution to use alloc_ordered_workqueue().
There are some conversions being routed through subsystem-specific
trees and likely a few stragglers. Once they're all converted,
workqueue can trigger a warning on unbound + @max_active==1 usages and
eventually drop the implicit ordered behavior"
* tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues
net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues
net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues
dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues
media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues
scsi: NCR5380: Use default @max_active for hostdata->work_q
media: coda: Use alloc_ordered_workqueue() to create ordered workqueues
crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues
wifi: mwifiex: Use default @max_active for workqueues
wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq
xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues
virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues
net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues
greybus: Use alloc_ordered_workqueue() to create ordered workqueues
powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molar:
"Build footprint & performance improvements:
- Reduce memory usage with CONFIG_DEBUG_INFO=y
In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel,
DWARF creates almost 200 million relocations, ballooning objtool's
peak heap usage to 53GB. These patches reduce that to 25GB.
On a distro-type kernel with kernel IBT enabled, they reduce
objtool's peak heap usage from 4.2GB to 2.8GB.
These changes also improve the runtime significantly.
Debuggability improvements:
- Add the unwind_debug command-line option, for more extend unwinding
debugging output
- Limit unreachable warnings to once per function
- Add verbose option for disassembling affected functions
- Include backtrace in verbose mode
- Detect missing __noreturn annotations
- Ignore exc_double_fault() __noreturn warnings
- Remove superfluous global_noreturns entries
- Move noreturn function list to separate file
- Add __kunit_abort() to noreturns
Unwinder improvements:
- Allow stack operations in UNWIND_HINT_UNDEFINED regions
- drm/vmwgfx: Add unwind hints around RBP clobber
Cleanups:
- Move the x86 entry thunk restore code into thunk functions
- x86/unwind/orc: Use swap() instead of open coding it
- Remove unnecessary/unused variables
Fixes for modern stack canary handling"
* tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/orc: Make the is_callthunk() definition depend on CONFIG_BPF_JIT=y
objtool: Skip reading DWARF section data
objtool: Free insns when done
objtool: Get rid of reloc->rel[a]
objtool: Shrink elf hash nodes
objtool: Shrink reloc->sym_reloc_entry
objtool: Get rid of reloc->jump_table_start
objtool: Get rid of reloc->addend
objtool: Get rid of reloc->type
objtool: Get rid of reloc->offset
objtool: Get rid of reloc->idx
objtool: Get rid of reloc->list
objtool: Allocate relocs in advance for new rela sections
objtool: Add for_each_reloc()
objtool: Don't free memory in elf_close()
objtool: Keep GElf_Rel[a] structs synced
objtool: Add elf_create_section_pair()
objtool: Add mark_sec_changed()
objtool: Fix reloc_hash size
objtool: Consolidate rel/rela handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double()
The cmpxchg128() family of functions is basically & functionally the
same as cmpxchg_double(), but with a saner interface.
Instead of a 6-parameter horror that forced u128 - u64/u64-halves
layout details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128
types.
- Restructure the generated atomic headers, and add kerneldoc comments
for all of the generic atomic{,64,_long}_t operations.
The generated definitions are much cleaner now, and come with
documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering when
taking multiple locks of the same type.
This gets rid of one use of lockdep_set_novalidate_class() in the
bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended variable
shadowing generating garbage code on Clang on certain ARM builds.
* tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
locking/atomic: scripts: fix ${atomic}_dec_if_positive() kerneldoc
percpu: Fix self-assignment of __old in raw_cpu_generic_try_cmpxchg()
locking/atomic: treewide: delete arch_atomic_*() kerneldoc
locking/atomic: docs: Add atomic operations to the driver basic API documentation
locking/atomic: scripts: generate kerneldoc comments
docs: scripts: kernel-doc: accept bitwise negation like ~@var
locking/atomic: scripts: simplify raw_atomic*() definitions
locking/atomic: scripts: simplify raw_atomic_long*() definitions
locking/atomic: scripts: split pfx/name/sfx/order
locking/atomic: scripts: restructure fallback ifdeffery
locking/atomic: scripts: build raw_atomic_long*() directly
locking/atomic: treewide: use raw_atomic*_<op>()
locking/atomic: scripts: add trivial raw_atomic*_<op>()
locking/atomic: scripts: factor out order template generation
locking/atomic: scripts: remove leftover "${mult}"
locking/atomic: scripts: remove bogus order parameter
locking/atomic: xtensa: add preprocessor symbols
locking/atomic: x86: add preprocessor symbols
locking/atomic: sparc: add preprocessor symbols
locking/atomic: sh: add preprocessor symbols
...
|
|
Commit e4412739472b ("Documentation: raise minimum supported version of
binutils to 2.25") allows us to remove the checks for old binutils.
There is no more user for ld-ifversion. Remove it as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230119082250.151485-1-masahiroy@kernel.org
|
|
binutils v2.37 drops unused section symbols, which prevents recordmcount
from capturing mcount locations in sections that have no non-weak
symbols. This results in a build failure with a message such as:
Cannot find symbol for section 12: .text.perf_callchain_kernel.
kernel/events/callchain.o: failed
The change to binutils was reverted for v2.38, so this behavior is
specific to binutils v2.37:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=c09c8b42021180eee9495bd50d8b35e683d3901b
Objtool is able to cope with such sections, so this issue is specific to
recordmcount.
Fail the build and print a warning if binutils v2.37 is detected and if
we are using recordmcount.
Cc: stable@vger.kernel.org
Suggested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230530061436.56925-1-naveen@kernel.org
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Thomas Gleixner:
"Initialize FPU late.
Right now FPU is initialized very early during boot. There is no real
requirement to do so. The only requirement is to have it done before
alternatives are patched.
That's done in check_bugs() which does way more than what the function
name suggests.
So first rename check_bugs() to arch_cpu_finalize_init() which makes
it clear what this is about.
Move the invocation of arch_cpu_finalize_init() earlier in
start_kernel() as it has to be done before fork_init() which needs to
know the FPU register buffer size.
With those prerequisites the FPU initialization can be moved into
arch_cpu_finalize_init(), which removes it from the early and fragile
part of the x86 bringup"
* tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build
x86/fpu: Move FPU initialization into arch_cpu_finalize_init()
x86/fpu: Mark init functions __init
x86/fpu: Remove cpuinfo argument from init functions
x86/init: Initialize signal frame size late
init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
init: Invoke arch_cpu_finalize_init() earlier
init: Remove check_bugs() leftovers
um/cpu: Switch to arch_cpu_finalize_init()
sparc/cpu: Switch to arch_cpu_finalize_init()
sh/cpu: Switch to arch_cpu_finalize_init()
mips/cpu: Switch to arch_cpu_finalize_init()
m68k/cpu: Switch to arch_cpu_finalize_init()
loongarch/cpu: Switch to arch_cpu_finalize_init()
ia64/cpu: Switch to arch_cpu_finalize_init()
ARM: cpu: Switch to arch_cpu_finalize_init()
x86/cpu: Switch to arch_cpu_finalize_init()
init: Provide arch_cpu_finalize_init()
|
|
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Miscellaneous features, cleanups, and fixes for vfs and individual fs
Features:
- Use mode 0600 for file created by cachefilesd so it can be run by
unprivileged users. This aligns them with directories which are
already created with mode 0700 by cachefilesd
- Reorder a few members in struct file to prevent some false sharing
scenarios
- Indicate that an eventfd is used a semaphore in the eventfd's
fdinfo procfs file
- Add a missing uapi header for eventfd exposing relevant uapi
defines
- Let the VFS protect transitions of a superblock from read-only to
read-write in addition to the protection it already provides for
transitions from read-write to read-only. Protecting read-only to
read-write transitions allows filesystems such as ext4 to perform
internal writes, keeping writers away until the transition is
completed
Cleanups:
- Arnd removed the architecture specific arch_report_meminfo()
prototypes and added a generic one into procfs.h. Note, we got a
report about a warning in amdpgpu codepaths that suggested this was
bisectable to this change but we concluded it was a false positive
- Remove unused parameters from split_fs_names()
- Rename put_and_unmap_page() to unmap_and_put_page() to let the name
reflect the order of the cleanup operation that has to unmap before
the actual put
- Unexport buffer_check_dirty_writeback() as it is not used outside
of block device aops
- Stop allocating aio rings from highmem
- Protecting read-{only,write} transitions in the VFS used open-coded
barriers in various places. Replace them with proper little helpers
and document both the helpers and all barrier interactions involved
when transitioning between read-{only,write} states
- Use flexible array members in old readdir codepaths
Fixes:
- Use the correct type __poll_t for epoll and eventfd
- Replace all deprecated strlcpy() invocations, whose return value
isn't checked with an equivalent strscpy() call
- Fix some kernel-doc warnings in fs/open.c
- Reduce the stack usage in jffs2's xattr codepaths finally getting
rid of this: fs/jffs2/xattr.c:887:1: error: the frame size of 1088
bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
royally annoying compilation warning
- Use __FMODE_NONOTIFY instead of FMODE_NONOTIFY where an int and not
fmode_t is required to avoid fmode_t to integer degradation
warnings
- Create coredumps with O_WRONLY instead of O_RDWR. There's a long
explanation in that commit how O_RDWR is actually a bug which we
found out with the help of Linus and git archeology
- Fix "no previous prototype" warnings in the pipe codepaths
- Add overflow calculations for remap_verify_area() as a signed
addition overflow could be triggered in xfstests
- Fix a null pointer dereference in sysv
- Use an unsigned variable for length calculations in jfs avoiding
compilation warnings with gcc 13
- Fix a dangling pipe pointer in the watch queue codepath
- The legacy mount option parser provided as a fallback by the VFS
for filesystems not yet converted to the new mount api did prefix
the generated mount option string with a leading ',' causing issues
for some filesystems
- Fix a repeated word in a comment in fs.h
- autofs: Update the ctime when mtime is updated as mandated by
POSIX"
* tag 'v6.5/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
readdir: Replace one-element arrays with flexible-array members
fs: Provide helpers for manipulating sb->s_readonly_remount
fs: Protect reconfiguration of sb read-write from racing writes
eventfd: add a uapi header for eventfd userspace APIs
autofs: set ctime as well when mtime changes on a dir
eventfd: show the EFD_SEMAPHORE flag in fdinfo
fs/aio: Stop allocating aio rings from HIGHMEM
fs: Fix comment typo
fs: unexport buffer_check_dirty_writeback
fs: avoid empty option when generating legacy mount string
watch_queue: prevent dangling pipe pointer
fs.h: Optimize file struct to prevent false sharing
highmem: Rename put_and_unmap_page() to unmap_and_put_page()
cachefiles: Allow the cache to be non-root
init: remove unused names parameter in split_fs_names()
jfs: Use unsigned variable for length calculations
fs/sysv: Null check to prevent null-ptr-deref bug
fs: use UB-safe check for signed addition overflow in remap_verify_area
procfs: consolidate arch_report_meminfo declaration
fs: pipe: reveal missing function protoypes
...
|
|
When memory is dynamically added/removed, iommu_mem_notifier() is invoked. This
routine traverses through all the DMA windows (DDW only, not default windows)
to add/remove "direct" TCE mappings. The routines for this purpose are
tce_clearrange_multi_pSeriesLP() and tce_clearrange_multi_pSeriesLP().
Both these routines are designed for Direct mapped DMA windows only.
The issue is that there could be some DMA windows in the list which are not
"direct" mapped. Calling these routines will either,
1) remove some dynamically mapped TCEs, Or
2) try to add TCEs which are out of bounds and HCALL returns H_PARAMETER
Here are the side affects when these routines are incorrectly invoked for
"dynamically" mapped DMA windows.
tce_setrange_multi_pSeriesLP()
This adds direct mapped TCEs. Now, this could invoke HCALL to add TCEs with
out-of-bound range. In this scenario, HCALL will return H_PARAMETER and DLAR
ADD of memory will fail.
tce_clearrange_multi_pSeriesLP()
This will remove range of TCEs. The TCE range that is calculated, depending on
the memory range being added, could infact be mapping some other memory
address (for dynamic DMA window scenario). This will wipe out those TCEs.
The solution is for iommu_mem_notifier() to only invoke these routines for
"direct" mapped DMA windows.
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
[mpe: Initialise direct at allocation time in ddw_list_new_entry()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230613171641.15641-1-gbatra@linux.vnet.ibm.com
|
|
This is one of the simple cases, except there's no pt_regs pointer.
Which is fine, as lock_mm_and_find_vma() is set up to work fine with a
NULL pt_regs.
Powerpc already enabled LOCK_MM_AND_FIND_VMA for the main CPU faulting,
so we can just use the helper without any extra work.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The powerpc architecture was the only one that defined
arch_trigger_cpumask_backtrace() in asm/nmi.h instead of
asm/irq.h. Move it to be consistent.
This fixes compile time errors introduced by commit 7ca8fe94aa92
("watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH"). That commit
caused <asm/nmi.h> to stop being included if the hardlockup detector
wasn't enabled. The specific errors were:
error: implicit declaration of function `nmi_cpu_backtrace'
error: implicit declaration of function `nmi_trigger_cpumask_backtrace'
NOTE: when moving this into irq.h, we also change the guards from just
checking if "CONFIG_NMI_IPI" is defined to also checking if
"CONFIG_PPC_BOOK3S_64" is defined. This matches the code in
arch/powerpc/kernel/stacktrace.c. Previously this worked because
<asm.nmi.h> was included if "CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH" was
defined. For powerpc that's only selected if "CONFIG_PPC_BOOK3S_64" is
defined.
[dianders@chromium.org: change the guards to include CONFIG_PPC_BOOK3S_64]
Link: https://lkml.kernel.org/r/20230622202816.v2.1.Ice67126857506712559078e7de26d32d26e64631@changeid
Link: https://lkml.kernel.org/r/20230621164809.1.Ice67126857506712559078e7de26d32d26e64631@changeid
Fixes: 7ca8fe94aa92 ("watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Closes: https://lore.kernel.org/r/871qi5otdh.fsf@mail.lhotse
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Disable IRQs when switching mm in exit_lazy_flush_tlb() called from
exit_mmap()
Thanks to Nicholas Piggin and Sachin Sant.
* tag 'powerpc-6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/radix: Fix exit lazy tlb mm switch with irqs enabled
|
|
and PowerNV
A build failure with CONFIG_HAVE_PCI=y set without PSERIES or POWERNV
set was caught by the random configuration checker. Guard the sPAPR
specific IOMMU functions on CONFIG_PPC_PSERIES || CONFIG_PPC_POWERNV.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2015925968.3546872.1685990936823.JavaMail.zimbra@raptorengineeringinc.com
|
|
The kopald thread handles opal events as they appear, but by polling a
static bit-vector in last_outstanding_events. Annotate these data races
accordingly. We are not at risk of missing events, but use of READ_ONCE,
WRITE_ONCE will assist readers in seeing that kopald only consumes the
events it is aware of when it is scheduled. Also removes extraneous
KCSAN warnings.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230510033117.1395895-10-rmclure@linux.ibm.com
|
|
Mark writes to hypervisor ipi state so that KCSAN recognises these
asynchronous issue of kvmppc_{set,clear}_host_ipi to be intended, with
atomic writes. Mark asynchronous polls to this variable in
kvm_ppc_read_one_intr().
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230510033117.1395895-9-rmclure@linux.ibm.com
|
|
IPI message flags are observed and consequently consumed in the
smp_ipi_demux_relaxed function, which handles these message sources
until it observes none more arriving. Mark the checked loop guard with
READ_ONCE, to signal to KCSAN that the read is known to be volatile, and
that non-determinism is expected. Mark write for message source in
smp_muxed_ipi_set_message().
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230510033117.1395895-8-rmclure@linux.ibm.com
|
