summaryrefslogtreecommitdiff
path: root/arch/m68k/include/asm/m54xxacr.h
AgeCommit message (Collapse)Author
2011-12-30m68k: modify ColdFire 54xx cache support for MMU enabledGreg Ungerer
Modify the cache setup for the ColdFire 54xx parts when running with the MMU enabled. We want to map the peripheral register space (MBAR region) as non cacheable. And create an identity mapping for all of RAM for the kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-01-05m68knommu: create optimal separate instruction and data cache for ColdFireGreg Ungerer
Create separate functions to deal with instruction and data cache flushing. This way we can optimize them for the vairous cache types and arrangements used across the ColdFire family. For example the unified caches in the version 3 cores means we don't need to flush the instruction cache. For the version 2 cores that do not do data cacheing (or where we choose instruction cache only) we don't need to do any data flushing. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: support ColdFire caches that do copyback and write-throughGreg Ungerer
The version 3 and version 4 ColdFire cache controllers support both write-through and copy-back modes on the data cache. Allow for Kconfig time configuration of this, and set the cache mode appropriately. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: make cache push code ColdFire genericGreg Ungerer
Currently the code to push cache lines is only available to version 4 cores. Version 3 cores may also need to use this if we support copy- back caches on them. Move this code to make it more generic, and useful for all version ColdFire cores. With this in place we can now have a single cache_flush_all() code path that does all the right things on all version cores. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: clean up ColdFire cache control codeGreg Ungerer
The cache control code for the ColdFire CPU's is a big ugly mess of "#ifdef"ery liberally coated with bit constants. Clean it up. The cache controllers in the various ColdFire parts are actually quite similar. Just differing in some bit flags and options supported. Using the header defines now in place it is pretty easy to factor out the small differences and use common setup and flush/invalidate code. I have preserved the cache setups as they where in the old code (except where obviously wrong - like in the case of the 5249). Following from this it should be easy now to extend the possible setups used on the CACHE controllers that support split cacheing or copy-back or write through options. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: use user stack pointer hardware on some ColdFire coresGreg Ungerer
The more modern ColdFire parts (even if based on older version cores) have separate user and supervisor stack pointers (a7 register). Modify the ColdFire CPU setup and exception code to enable and use this on parts that have it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: make Coldfire 548x support more genericGreg Ungerer
The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: Use symbolic constants for cache operations on M54xxPhilippe De Muyter
Now that we have meaningfull symbolic constants for bit definitions of the cache registers of m5407 and m548x chips, use them to improve readability, portability and efficiency of the cache operations. This also fixes __flush_cache_all for m548x chips : implicit DCACHE_SIZE was exact for m5407, but wrong for m548x. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: Move __flush_cache_all definition for m54xx in m54xxacr.hPhilippe De Muyter
__flush_cache_all for m54xx is intrinsically related to the bit definitions in m54xxacr.h. Move it there from cacheflush_no.h, for easier maintenance. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: Create new m54xxacr.h from m5407sim.h subpartPhilippe De Muyter
The MCF548x have the same cache control registers as the MCF5407. Extract the bit definitions for the ACR and CACR registers from m5407sim.h and move them to a new file m54xxacr.h. Those definitions are not used anywhere yet, so no other file is involved. This is a preparation for m54xx cache support cleanup. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>