summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2012-04-08kvmclock: Add functions to check if the host has stopped the vmEric B Munson
When a host stops or suspends a VM it will set a flag to show this. The watchdog will use these functions to determine if a softlockup is real, or the result of a suspended VM. Signed-off-by: Eric B Munson <emunson@mgebm.net> asm-generic changes Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-05Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: SoC fixes: from Olof Johansson: "A bunch of fixes for regressions (and a few other problems) in 3.4-rc1: - Fix for regression of mach/io.h cleanup on platforms with PCI or PCMCIA (adding back the include file on those for now) - AT91 fixes for usb and spi - smsc911x ethernet fixes for i.MX - smsc911x fixes for OMAP - gpio fixes for Tegra - A handful of build error and warning fixes for various platforms - cpufreq kconfig dependencies, build and lowlevel debug fixes for Samsung platforms In other words, more or less the regular collection of -rc1/2 type material. A few of them, in particular the smsc911x for OMAP series, aren't technically regressions for 3.4, but they're valid fixes and we're still relatively early in the rc cycle so it seems appropriate to include them." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: fix __io macro for PCMCIA ARM: EXYNOS: Fix compiler warning in dma.c file ARM: EXYNOS: fix ISO C90 warning ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status ARM: OMAP2+: hwmod: Restore sysc after a reset ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modules ARM: OMAP3: clock data: fill in some missing clockdomains ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock ARM: OMAP4: clock data: fix mult and div mask for USB_DPLL ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch() gpio: tegra: Iterate over the correct number of banks gpio: tegra: fix register address calculations for Tegra30 EXYNOS: fix dependency for EXYNOS_CPUFREQ ARM: at91: dt: remove unit-address part for memory nodes ARM: at91: fix check of valid GPIO for SPI and USB USB: ehci-atmel: add needed of.h header file ARM: at91/NAND DT bindings: add comments ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file USB: ohci-at91: trivial return code name change ...
2012-04-05Merge tag 'omap-fixes-a2-for-3.4rc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes From Paul Walmsley: OMAP clock, powerdomain, clockdomain, and hwmod fixes intended for the early v3.4-rc series. Also contains an HSMMC integration refinement of an earlier hardware bug workaround. * tag 'omap-fixes-a2-for-3.4rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status ARM: OMAP2+: hwmod: Restore sysc after a reset ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modules ARM: OMAP3: clock data: fill in some missing clockdomains ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock ARM: OMAP4: clock data: fix mult and div mask for USB_DPLL ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch() ARM: OMAP AM3517/3505: clock data: change EMAC clocks aliases ARM: OMAP: clock: fix race in disable all clocks ARM: OMAP4: hwmod data: Add aliases for McBSP fclk clocks ARM: OMAP3xxx: clock data: fix DPLL4 CLKSEL masks ARM: OMAP3xxx: HSMMC: avoid erratum workaround when transceiver is attached ARM: OMAP44xx: clockdomain data: correct the emu_sys_clkdm CLKTRCTRL data
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05ARM: fix __io macro for PCMCIARob Herring
With commit c334bc1 (ARM: make mach/io.h include optional), PCMCIA was broken. PCMCIA depends on __io() returning a valid i/o address, and most ARM platforms require IO_SPACE_LIMIT be set to 0xffffffff for PCMCIA. This needs a better fix with a fixed i/o address mapping, but for now we just restore things to the previous behavior. This fixes at91, omap1, pxa and sa11xx. pxa needs io.h if PCI is enabled, but PCMCIA is not. sa11xx already has IO_SPACE_LIMIT set to 0xffffffff, so it doesn't need an io.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Joachim Eastwood <joachim.eastwood@jotron.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Tested-by: Paul Parsons <lost.distance@yahoo.com> (pxa270) Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-04-05Merge branch 'v3.4-samsung-fixes-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.4-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Fix compiler warning in dma.c file ARM: EXYNOS: fix ISO C90 warning ARM: EXYNOS: use chip_id reg in uncompress to select uart base phys ARM: EXYNOS: fix CONFIG_DEBUG_LL ARM: S3C24XX: fix missing common.h in mach-s3c24xx/
2012-04-05Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Note that this also contains a set of fixes that are not regressions or oopses to properly deal with the smsc911x regulator issue. Basically the regulators must be per board file as the regulators can also come from drivers, such as twl4030. So it's best to dumb down gpmc-smsc911x.c to not even care about the regulators. * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: fix section mismatches in usb-host.c ARM: OMAP2+: Fix omap2+ build error ARM: OMAP2+: smsc911x: Add fixed board regulators ARM: OMAP2+: smsc911x: Remove regulator support from gmpc-smsc911x ARM: OMAP2+: smsc911x: Remove unused rate calculation ARM: OMAP2+ smsc911x: Fix possible stale smsc911x flags ARM: OMAP2+: smsc911x: Remove odd gpmc_cfg/board_data redirection ARM: OMAP3+: fix oops triggered in omap_prcm_register_chain_handler(v1) ARM: OMAP2+: OPP: allow OPP enumeration to continue if device is not present arm: omap3: pm34xx.c: Replace printk() with appropriate pr_*() arm: omap3: pm34xx.c: Fix omap3_pm_init() error out paths ARM: OMAP4: Workaround the OCP synchronisation issue with 32K synctimer. ARM: OMAP4: prm: fix interrupt register offsets ARM: OMAP: hwmod: Use sysc_fields->srst_shift and get rid of hardcoded SYSC_TYPE2_SOFTRESET_MASK
2012-04-05Merge branch 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson
* 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: dt: remove unit-address part for memory nodes ARM: at91: fix check of valid GPIO for SPI and USB USB: ehci-atmel: add needed of.h header file ARM: at91/NAND DT bindings: add comments ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file USB: ohci-at91: trivial return code name change USB: ohci-at91: change maximum number of ports USB: ohci-at91: rework and fix initialization ARM: at91/dts: USB host vbus is active low ARM: at91/USB host: specify and handle properly vbus_pin_active_low USB: ohci-at91: fix vbus_pin_active_low handling ARM: at91/at91sam9x5: add clkdev entries for DMA controllers
2012-04-05ARM: EXYNOS: Fix compiler warning in dma.c fileSachin Kamat
Fixes the following warning: warning: 'dma_dmamask' defined but not used [-Wunused-variable] Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-05ARM: EXYNOS: fix ISO C90 warningIl Han
ISO C90 forbids mixed declarations and code. Fix it. Signed-off-by: Il Han <corone.il.han@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-05Merge branches 'clock_fixes_3.4rc', 'clockdomain_fixes_3.4rc', ↵Paul Walmsley
'hsmmc_erratum_2_1_1_128_refine_3.4rc1', 'hwmod_data_fixes_a_3.4rc', 'hwmod_fixes_a2_3.4rc' and 'powerdomain_fixes_a_3.4rc' into omap-fixes-a2-for-3.4rc-branch
2012-04-05ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitionsVaibhav Hiremath
In the SYSC_TYPE1_XXX_MASK configuration, SYSC_XXX_SHIFT macro is used which is not defined anywhere in the kernel. Until now the build was going through successfully, since it is not being used anywhere in kernel. This bug got introduced by the commit 358f0e630d5409ab3837b86db3595560eae773b6 ("OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits.") Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-05ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset statusRajendra Nayak
omap_hwmod_softreset() does not seem to wait for reset status after doing a softreset. Make it use _ocp_softreset() instead which does this correctly. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-05ARM: OMAP2+: hwmod: Restore sysc after a resetRajendra Nayak
After a softreset, make sure the sysc settings are correctly restored. Reported-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shubhrajyoti D <shubhrajyoti@ti.com> [paul@pwsan.com: combined post-reset SYSCONFIG reload code into the _reset() function to avoid duplication and future mistakes] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-05ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modulesGovindraj.R
Some modules doesn't have SYSC_HAS_ENAWAKEUP bit available (ex: usb host uhh module) in absence of this flag omap_hwmod_enable/disable_wakeup avoids configuring pad mux wakeup capability. Configure sysc if SYSC_HAS_ENAWAKEUP is available and for other cases try enabling/disabling wakeup from mux_pad pins. Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> [paul@pwsan.com: updated function kerneldoc documentation] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-04ARM: OMAP3: clock data: fill in some missing clockdomainsPaul Walmsley
Several clocks are missing clockdomains. This can cause problems with the hwmod and power management code. Fill these in. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Matt Porter <mporter@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com>
2012-04-04ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relockRajendra Nayak
All DPLLs except USB are in ALWON powerdomain. Make sure the clkdm/pwrdm for USB DPLL (l3init) is turned on before attempting a DPLL relock. So, mark the database accordingly. Without this fix, it was seen that DPLL relock fails while testing relock in a loop of USB DPLL. Cc: Nishanth Menon <nm@ti.com> Tested-by: Ameya Palande <ameya.palande@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-04ARM: OMAP4: clock data: fix mult and div mask for USB_DPLLAmeya Palande
According to OMAP4 TRM Table 3-1183, CM_CLKSEL_DPLL_USB register defines following fields for multiplication and division factors: DPLL_MULT (bits 19:8) DPLL multiplier factor (2 to 4095) DPLL_DIV (bits 7:0) DPLL divider factor (0 to 255) Acked-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Ameya Palande <ameya.palande@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-04ARM: OMAP2+: powerdomain: Wait for powerdomain transition in ↵Santosh Shilimkar
pwrdm_state_switch() Commit b1cbdb00d ("OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup") was assuming that pwrdm_state_switch() does wait for the powerdomain transition which is not the case. The missing wait for the powerdomain transition violates the sequence which the hardware expects, which causes power management failures on some devices. Fix this API by adding the pwrdm_wait_transition(). Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: added some more details in the commit log] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-04ARM: at91: dt: remove unit-address part for memory nodesLudovic Desroches
Because of the inclusion of skeleton.dtsi, the memory node is named "memory" we where not modifying the already included one but creating a new one. It caused bad memory node detection during early_init_dt_scan_memory() so we modify them. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: devicetree-discuss@lists.ozlabs.org
2012-04-04ARM: at91: fix check of valid GPIO for SPI and USBNicolas Ferre
SPI chip select pins have to be checked by gpio_is_valid(). The USB host overcurrent_pin checking was missing. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-04-04ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT fileNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-04-04USB: ohci-at91: change maximum number of portsNicolas Ferre
Change number of ports to 3 for newer SoCs. Modify pdata structure and ohci-at91 code that was dealing with ports information and check of port indexes. Several coding style errors have been addresses as the patch was touching affected lines of code and was producing errors while run through checkpatch.pl. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Alan Stern <stern@rowland.harvard.edu>
2012-04-04ARM: at91/dts: USB host vbus is active lowNicolas Ferre
Change vbus gpio configuration in .dts files to switch to active low configuration. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org>
2012-04-04ARM: at91/USB host: specify and handle properly vbus_pin_active_lowNicolas Ferre
Due to an error while handling vbus_pin_active_low in ohci-at91 driver, the specification of this property was not good in devices/board files. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org> [3.2+]
2012-04-04ARM: EXYNOS: use chip_id reg in uncompress to select uart base physDima Zavin
Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-04ARM: EXYNOS: fix CONFIG_DEBUG_LLColin Cross
addruart cannot read from the physical address of the chipid register, that will fail as soon as the mmu is turned on. Fixing it to read from the physical or virtual address depending on the mmu state also does not work, because there is a period between head.S and exynos_map_io where the mmu is on, the uart is mapped and used, but the chipid mapping is not yet present. Fix addruart to use the ARM Main ID cp15 register to determine if the core is Cortex A15 (EXYNOS5) or not (EXYNOS4). Signed-off-by: Colin Cross <ccross@android.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-04ARM: OMAP AM3517/3505: clock data: change EMAC clocks aliasesIlya Yanok
Rename EMAC clocks to match driver expectations: both davinci_emac and davinci_mdio drivers call clk_get(dev, NULL) so we have to provide ("davinci_emac", NULL) and ("davinci_mdio.0", NULL) clocks instead of ("davinci_emac", "emac_clk") and ("davinci_emac", "phy_clk") resp. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Tested-by: Matt Porter <mporter@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-04Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Nothing too big here, just small fixes." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: fix more fallout from 9f97da78bf (Disintegrate asm/system.h for ARM) ARM: fix bios32.c build warning ARM: 7337/1: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms ARM: fix missing bug.h include in arch/arm/kernel/insn.c ARM: sa11x0: fix build errors from DMA engine API updates
2012-04-04ARM: OMAP: clock: fix race in disable all clocksNishanth Menon
clk_disable_unused is invoked when CONFIG_OMAP_RESET_CLOCKS=y. Since clk_disable_unused is called as lateinitcall, there can be more than a few workqueues executing off secondary CPU(s). The current code does the following: a) checks if clk is unused b) holds lock c) disables clk d) unlocks Between (a) and (b) being executed on CPU0, It is possible to have a driver executing on CPU1 which could do a get_sync->clk_get (and increase the use_count) of the clock which was just about to be disabled by clk_disable_unused. We ensure instead that the entire list traversal is protected by the lock allowing for parent child clock traversal which could be potentially be done by runtime operations to be safe as well. Reported-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-04ARM: OMAP4: hwmod data: Add aliases for McBSP fclk clocksPaul Walmsley
CLKS signal for McBSP ports can be selected from internal (PRCM) or external (ABE_CLKS pin) source. To be able to use existing code we need to create clock aliases consistent among OMAP2/3/4. Based on a patch from Péter Ujfalusi <peter.ujfalusi@ti.com>; the patch description above is his. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Péter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2012-04-04ARM: OMAP3xxx: clock data: fix DPLL4 CLKSEL masksGrazvydas Ignotas
Commit 2a9f5a4d455 "OMAP3 clock: remove unnecessary duplicate of dpll4_m2_ck, added for 36xx" consolidated dpll4 clock structures between 34xx and 36xx, but left 34xx CLKSEL masks for most dpll4 related clocks, which causes clock code to not behave correctly when booting on DM3730 with higher (36xx only) divisors set: [ 0.000000] WARNING: at arch/arm/mach-omap2/clkt_clksel.c:375 omap2_init_clksel_parent+0x104/0x114() [ 0.000000] clock: dpll4_m3_ck: init parent: could not find regval 0 [ 0.000000] WARNING: at arch/arm/mach-omap2/clkt_clksel.c:194 omap2_clksel_recalc+0xd4/0xe4() [ 0.000000] clock: Could not find fieldval 0 for clock dpll4_m3_ck parent dpll4_ck Fix this by switching to 36xx masks, as valid divisors will be limited by clksel_rate lists. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-04ARM: OMAP3xxx: HSMMC: avoid erratum workaround when transceiver is attachedGrazvydas Ignotas
If transceiver is attached to a MMC host of ES2.1 OMAP35xx, it seems 2.1.1.128 erratum doesn't apply and there is no data corruption, probably because of different signal timing. The workaround for this erratum disables multiblock reads, which causes dramatic loss of performance (over 75% slower), so avoid it when transceiver is present. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> [paul@pwsan.com: edited commit message slightly] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-04ARM: OMAP44xx: clockdomain data: correct the emu_sys_clkdm CLKTRCTRL dataPaul Walmsley
According to the 4430 ES2.0 TRM vX Table 3-744 "CM_EMU_CLKSTCTRL", the emu_sys clockdomain data in mainline is incorrect. The emu_sys clockdomain does not support the DISABLE_AUTO state, and instead it supports the FORCE_WAKEUP state. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Ming Lei <ming.lei@canonical.com> Cc: Will Deacon <will.deacon@arm.com>
2012-04-03Merge branch 'for_3.4/fixes/pm' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into fixes
2012-04-03Merge branch 'fixes-smsc911x' into fixesTony Lindgren
2012-04-03ARM: OMAP: fix section mismatches in usb-host.cIgor Grinberg
Fix the below section mismatch warning and alike: WARNING: vmlinux.o(.text+0x281d4): Section mismatch in reference from the function setup_ehci_io_mux() to the function .init.text:omap_mux_init_signal() The function setup_ehci_io_mux() references the function __init omap_mux_init_signal(). This is often because setup_ehci_io_mux lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-03ARM: OMAP2+: Fix omap2+ build errorR Sricharan
With CONFIG_OMAP4_ERRATA_I688 enabled, omap2+ build was broken as below: arch/arm/kernel/io.c: In function '_memcpy_toio': arch/arm/kernel/io.c:29: error: implicit declaration of function 'outer_sync' make[1]: *** [arch/arm/kernel/io.o] Error 1 This was caused by commit 9f97da78 (Disintegrate asm/system.h for ARM). Signed-off-by: R Sricharan <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-03ARM: OMAP2+: smsc911x: Add fixed board regulatorsRuss Dill
Initialize fixed regulators in the board files. Trying to do this in a generic way in gpmc-smsc911x.c gets messy as the regulator may be provided by drivers, such as twl4030, for some boards. Signed-off-by: Russ Dill <russ.dill@ti.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> [tony@atomide.com: combined into one patch, updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-03ARM: OMAP2+: smsc911x: Remove regulator support from gmpc-smsc911xRuss Dill
Adding in support for regulators here creates several headaches. - Boards that declare their own regulator cannot use this function. - Multiple calls to this function require special handling. - Boards that declare id's other than '0' need special handling. Now that there is a simple regulator_register_fixed, we can push this registration back into the board files. Signed-off-by: Russ Dill <russ.dill@ti.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-03ARM: OMAP2+: smsc911x: Remove unused rate calculationRuss Dill
Looking back into git history, this code was never used and was probably left over from a copy/paste. Signed-off-by: Russ Dill <russ.dill@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-03ARM: OMAP2+ smsc911x: Fix possible stale smsc911x flagsRuss Dill
If this function is called the first time with flags set, and the second time without flags set then the leftover flags from the first called will be used rather than the desired default flags. Signed-off-by: Russ Dill <russ.dill@ti.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-03ARM: OMAP2+: smsc911x: Remove odd gpmc_cfg/board_data redirectionRuss Dill
This seems to be a leftover from when gpmc-smsc911x.c was copied from gpmc-smc91x.c. Signed-off-by: Russ Dill <russ.dill@ti.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-03Merge branch 'misc_devel_3.4' of git://git.pwsan.com/linux-2.6 into fixesTony Lindgren
2012-04-03Merge tag 'v3.4-rc1-imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Olof Johansson
into fixes Linux-3.4-rc1 i.MX fixes * tag 'v3.4-rc1-imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: armadillo5x0: Fix smsc911x driver probe ARM: kzm_arm11_01: Fix smsc911x driver probe ARM: mx31lilly: Fix smsc911x driver probe ARM: mx31lite: Fix smsc911x driver probe ARM: mx53ard: Fix smsc911x driver probe ARM: mx35: Fix registration of camera clock ARM: 3ds_debugboard: Fix smsc911x driver probe MX2: Fix mx2_camera clock regression. ARM: mach-mx35_3ds: Fix build warning due to the lack of 'const' annotation
2012-04-02ARM: fix lcd power build failure in collie_defconfigPaul Gortmaker
Commit 086ada54abaa4316e8603f02410fe8ebc9ba2de1 "FB: sa1100: remove global sa1100fb_.*_power function pointers" got rid of all instances but one in locomolcd.c -- which was conditional on CONFIG_SA1100_COLLIE. The associated .power field which replaces the global is populated in mach-sa1100/collie.c so move the assignment there, but make it conditional on the locomolcd support, so use CONFIG_BACKLIGHT_LOCOMO in that file. Cc: arm@kernel.org Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-04-02ARM: versatile: fix build failure in pci.cPaul Gortmaker
commit 9f786d033d025ab7d2c4d1b959aa81d935eb9e19 "arm/PCI: get rid of device resource fixups" causes this failure on the versatile: arch/arm/mach-versatile/pci.c: In function 'pci_versatile_setup_resources': arch/arm/mach-versatile/pci.c:221: error: 'sys' undeclared (first use in this function) because the versatile wasn't passing in the full struct pci_sys_data but only the resource sub-field. Change it to pass in the full struct so that sys will be in scope. Reported-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-04-02Merge branch 'paul' (Fixups from Paul Gortmaker)Linus Torvalds
This merges some of the fixes from Paul Gortmaker for the header file cleanup fallout. Some of the patches are going through arch maintainer trees, and David Howells suggested another be done differently, but this at least fixes a few cases. * emailed from Paul Gortmaker <paul.gortmaker@windriver.com>: asm-generic: add linux/types.h to cmpxchg.h firewire: restore the device.h include in linux/firewire.h frv: fix warnings in mb93090-mb00/pci-dma.c about implicit EXPORT_SYMBOL parisc: fix missing cmpxchg file error from system.h split blackfin: fix cmpxchg build fails from system.h fallout avr32: fix build failures from mis-naming of atmel_nand.h ARM: mach-msm: fix compile fail from system.h fallout irq_work: fix compile failure on MIPS from system.h split
2012-04-02ARM: mach-msm: fix compile fail from system.h falloutPaul Gortmaker
To fix: In file included from arm/boot/compressed/misc.c:28:0: arm/mach-msm/include/mach/uncompress.h: In function 'putc': arch/arm/mach-msm/include/mach/uncompress.h:48:3: error: implicit declaration of function 'smp_mb' [-Werror=implicit-function-declaration] The putc does a cpu_relax which for this platform is smp_mb. Bisect indicates the 1st failing commit as: 0195c00244dc ("Merge tag 'split-asm_system_h...") Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: David Howells <dhowells@redhat.com> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-29 19:21:49 +0000