summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2012-04-22Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Here's my usual Sunday push, just for one revert which PeterZ hollered about after last weeks push. Other than that, all seems strangely quiet as far as fixes go in non-platform ARM land at the moment." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: Revert "ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus"
2012-04-21Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: SoC fixes" from Olof Johansson: * at91, ux500, imx, omap and bcmring: - at91 fixes for =m driver build issues, irqdomain fixes and config dependency fixes - ux500 kconfig dependency fixes and a smp wakeup bugfix - imx idle bugfix and build fix due to irq domain changes - omap uart pinmux fixes, softreset regression revert and misc fixes - bcmring build error regression fix * ux500 and imx had some small defconfig updates in this branch * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: bcmring: fix UART declarations ARM: imx: Fix imx5 idle logic bug ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple() ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE ARM: OMAP1: DMTIMER: fix broken timer clock source selection ARM: OMAP: serial: Fix the ocp smart idlemode handling bug ARM: OMAP2+: UART: Fix incorrect population of default uart pads ARM: OMAP: sram: fix BUG in dpll code for !PM case dmaengine: Kconfig: fix Atmel at_hdmac entry USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt USB: ohci-at91: change annotations for probe/remove functions leds-atmel-pwm.c: Make pwmled_probe() __devinit ARM: at91: fix at91sam9261ek Ethernet dm9000 irq ARM: at91: fix rm9200ek flash size ARM: at91: remove empty at91_init_serial function ARM: at91: fix typo in at91_pmc_base assembly declaration ARM: at91: Export at91_matrix_base ARM: at91: Export at91_pmc_base ARM: at91: Export at91_ramc_base ARM: at91: Export at91_st_base ...
2012-04-20ARM: EXYNOS: Fix incorrect initialization of GICThomas Abraham
Use the of_irq_init() call to setup the gic which also properly registers the gic device node pointer with gic irq domain, without which all interrupt specifier translations for gic fail. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-20ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllersThomas Abraham
With the addition of platform specific driver data in the sdhci driver for EXYNOS4 and EXYNOS5, the device name of sdhci controllers on EXYNOS4 and EXYNOS5 are changed accordingly. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> [kgene.kim@samsung.com: re-worked on top of v3.4-rc2] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-20ARM: u300: bump all IRQ numbers by oneLinus Walleij
Since the VIC was converted to use generic IRQ domains IRQ 0 is silently ignored. This IRQ is used on the U300 so we're missing it now. Bump all IRQ numbers by one since they are now decoupled from the hardware IRQ numbers. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-20ARM: ux300: Fix unimplementable regulation constraintsMark Brown
It doesn't make sense to grant permission to change the status of a regulator that is also set as always on and similarly it doesn't make sense to allow a driver to change the voltage of a regulator which can only be set to a single voltage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-19Revert "ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus"Russell King
This reverts commit 9f85550347f51c79a917b2aec04c90691c11e20a. Peter Zijlstra says: | Argh, how did that ever make it upstream, please drop. | | Russell, please make that go away upstream. | | Like I said, this is both completely the wrong way to solve, and you're | so not paying attention, see: | | 5fbd036b552f633abb394a319f7c62a5c86a9cd7 | 2baab4e90495ebc9826c93f79d74d6e60a828d24 | e3831edd59edf57ca11fc289f08961b20baf5146 | | What's even worse: | | git describe --contains 9f85550347f51c79a917b2aec04c90691c11e20a --match "v*" | v3.4-rc3~1^2~3 | | that nonsense got merged long after those other commits. Linus Walleij says: | My bad, was because the initial patch was submitted march 9th before | these fixes were merged: | http://marc.info/?l=linux-arm-kernel&m=133159655513844&w=2 | | It was pending for a while in Russell's patch tracker and I | rebased it to -rc2 without paying enough attention to recent | related scheduler fixes ... lesson learned. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-18Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson
Here is another fixes series for AT91 designed for 3.4-rc. We experienced some issues while compiling some drivers as modules: Joachim has corrected several of them. We may reduce this number of exported values by reworking some drivers, in the future. Some drivers are also modified here, I would like to keep them in the series as the modifications are really related with our recent move to irqdomains or simply related with compiler annotations. I keep dmaengine Kconfig modification in this "fixes" series. The DMA driver will not be available for 9x5 SoC family otherwise. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: dmaengine: Kconfig: fix Atmel at_hdmac entry USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt USB: ohci-at91: change annotations for probe/remove functions leds-atmel-pwm.c: Make pwmled_probe() __devinit ARM: at91: fix at91sam9261ek Ethernet dm9000 irq ARM: at91: fix rm9200ek flash size ARM: at91: remove empty at91_init_serial function ARM: at91: fix typo in at91_pmc_base assembly declaration ARM: at91: Export at91_matrix_base ARM: at91: Export at91_pmc_base ARM: at91: Export at91_ramc_base ARM: at91: Export at91_st_base
2012-04-18Merge branch 'fixes-for-arm-soc-20120416' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes * 'fixes-for-arm-soc-20120416' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: update defconfig ARM: ux500: Fix unmet direct dependency ARM: ux500: wake secondary cpu via resched
2012-04-18Merge tag 'v3.4-rc3-imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Olof Johansson
into fixes ARM i.MX misc fixes for -rc * tag 'v3.4-rc3-imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: imx: Fix imx5 idle logic bug ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple() ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE
2012-04-18Merge tag 'omap-fixes-for-v3.4-rc3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fix regression for bad uart muxing and oops when PM is not set. Revert one softreset regression and few other minor fixes. * tag 'omap-fixes-for-v3.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP1: DMTIMER: fix broken timer clock source selection ARM: OMAP: serial: Fix the ocp smart idlemode handling bug ARM: OMAP2+: UART: Fix incorrect population of default uart pads ARM: OMAP: sram: fix BUG in dpll code for !PM case ARM: OMAP2/3: VENC hwmods: Remove OCPIF_SWSUP_IDLE flag from VENC slave interface ARM: OMAP2+: hwmod: Revert "ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status" ARM: OMAP2+: hwmod: add softreset delay field and OMAP4 data ARM: OMAP1: mux: add missing include
2012-04-18ARM: bcmring: fix UART declarationsPaul Gortmaker
This error appeared in the bcmring_defconfig build: CC arch/arm/mach-bcmring/core.o arch/arm/mach-bcmring/core.c:55: error: macro "AMBA_APB_DEVICE" requires 6 arguments, but only 5 given arch/arm/mach-bcmring/core.c:55: warning: type defaults to 'int' in declaration of 'AMBA_APB_DEVICE' arch/arm/mach-bcmring/core.c:56: error: macro "AMBA_APB_DEVICE" requires 6 arguments, but only 5 given arch/arm/mach-bcmring/core.c:56: warning: type defaults to 'int' in declaration of 'AMBA_APB_DEVICE' arch/arm/mach-bcmring/core.c:134: error: 'uartA_device' undeclared here (not in a function) arch/arm/mach-bcmring/core.c:135: error: 'uartB_device' undeclared here (not in a function) make[2]: *** [arch/arm/mach-bcmring/core.o] Error 1 It appeared as of commit 8ede1ae65e61282cddba39bde4142be3885a6f5a "ARM: amba: bcmring: use common amba device initializers" Note that in include/linux/amba/bus.h we have: #define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) ... There is an a --> A case error in the busid and a missing zero placeholder for the id field. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> [olof: reworded patch subject] Signed-off-by: Olof Johansson <olof@lixom.net>
2012-04-18ARM: imx: Fix imx5 idle logic bugRobert Lee
The imx5_idle() check of the tzic_eanble_wake() return value uses incorrect (inverted) logic causing all attempt to idle to fail. Signed-off-by: Robert Lee <rob.lee@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-18ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple()Fabio Estevam
commit 6b783f7c (irq_domain: Remove irq_domain_add_simple() replaced irq_domain_add_simple with irq_domain_add_legacy() Implement this conversion so that imx27-dt can be built again. Reported-by: Chris Ball <cjb@laptop.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-18ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGEFabio Estevam
Add support for CONFIG_REGULATOR_FIXED_VOLTAGE. Without this option the mx27_3ds cannot have the external Ethernet functional due to the need of smsc regulators. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-17ARM: OMAP1: DMTIMER: fix broken timer clock source selectionPaul Walmsley
DMTIMER source selection on OMAP1 is broken. omap1_dm_timer_set_src() tries to use __raw_{read,write}l() to read from and write to physical addresses, but those functions take virtual addresses. sparse caught this: arch/arm/mach-omap1/timer.c:50:13: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap1/timer.c:50:13: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap1/timer.c:50:13: got unsigned int arch/arm/mach-omap1/timer.c:52:9: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap1/timer.c:52:9: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap1/timer.c:52:9: got unsigned int Fix by using omap_{read,writel}(), just like the other users of the MOD_CONF_CTRL_1 register in the OMAP1 codebase. Of course, in the long term, removing omap_{read,write}l() is the appropriate thing to do; but this will take some work to do this cleanly. Looks like this was caused by 97933d6 (ARM: OMAP1: dmtimer: conversion to platform devices) that dangerously moved code and changed it in the same patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com> Cc: stable@vger.kernel.org [tony@atomide.com: updated comments to include the breaking commit] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-17ARM: OMAP: serial: Fix the ocp smart idlemode handling bugSantosh Shilimkar
The current serial UART code, while fidling with ocp idlemode bits, forget about the smart idle wakeup bit even if it is supported by UART IP block. This will lead to missing the module wakeup on OMAP's where the smart idle wakeup is supported. This was the root cause of the console sluggishness issue, I have been observing on OMAP4 devices and also can be potential reason for some other UART wakeup issues. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Govindraj.R <govindraj.raja@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-17ARM: OMAP2+: UART: Fix incorrect population of default uart padsGovindraj.R
Commit (7496ba3 ARM: OMAP2+: UART: Add default mux for all uarts) wrongly added muxing of default pads for all uarts. This causes breakage on multiple boards using uart pins for alternate functions. For example, on zoom3 random oopses can be seen with nfsroot as the smsc911x ethernet FIFO timings on GPMC bus are controlled by gpmc_wait2 and gpmc_wait3 pins. This means we can't mux these pads to uart4 functionality as commit 7496ba3 was doing. Not all boards tend to use all uarts and most of unused uart pins are muxed for other purpose. This commit breaks the modules which where trying to use unused uart pins on their boards. So remove the default pad muxing. Note that this is not a complete fix, as we now rely on bootloader set muxing for the uart wake-up events. Further patching is needed to enable wake-up events for uarts that are already muxed to uart mode. Cc: Felipe Balbi <balbi@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: Russ Dill <russ.dill@gmail.com> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> [tony@atomide.com: updated comments to describe oops on zoom3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-17ARM: OMAP: sram: fix BUG in dpll code for !PM caseGrazvydas Ignotas
_omap3_sram_configure_core_dpll is called when SDRC is reprogrammed, which is done regardless of CONFIG_PM setting, so we always need it's setup code too. Without this, we hit a BUG() on OMAP3 when kernel is built without CONFIG_PM: Reprogramming SDRC clock to 332000000 Hz ------------[ cut here ]------------ kernel BUG at arch/arm/plat-omap/sram.c:342! Internal error: Oops - BUG: 0 [#1] ARM ... [<c001c694>] (omap3_configure_core_dpll+0x68/0x6c) from [<c001b2dc>] (omap3_core_dpll_m2_set_rate+0x1) [<c001b2dc>] (omap3_core_dpll_m2_set_rate+0x138/0x1b0) from [<c001a478>] (omap2_clk_set_rate+0x14/0x2) [<c001a478>] (omap2_clk_set_rate+0x14/0x20) from [<c001c9dc>] (clk_set_rate+0x54/0x74) [<c001c9dc>] (clk_set_rate+0x54/0x74) from [<c022b9c8>] (omap_sdrc_init+0x70/0x90) [<c022b9c8>] (omap_sdrc_init+0x70/0x90) from [<c022f178>] (omap3pandora_init+0x11c/0x164) [<c022f178>] (omap3pandora_init+0x11c/0x164) from [<c022849c>] (customize_machine+0x20/0x28) [<c022849c>] (customize_machine+0x20/0x28) from [<c0225810>] (do_one_initcall+0xa0/0x16c) [<c0225810>] (do_one_initcall+0xa0/0x16c) from [<c02259e0>] (kernel_init+0x104/0x1ac) [<c02259e0>] (kernel_init+0x104/0x1ac) from [<c0009cec>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-16mfd: Convert twl6040 to i2c driver, and separate it from twl corePeter Ujfalusi
Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16ARM: at91: fix at91sam9261ek Ethernet dm9000 irqJean-Christophe PLAGNIOL-VILLARD
You need to setup the dm9000 irq via gpio_to_irq() since d0fbda9add (ARM: at91/gpio: drop PIN_BASE). Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> [3.2+]
2012-04-16ARM: at91: fix rm9200ek flash sizeJean-Christophe PLAGNIOL-VILLARD
The flash size is 8MiB. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: remove empty at91_init_serial functionJoachim Eastwood
The real function is long gone and the empty one will generate warnings when configured without Atmel serial: arch/arm/mach-at91/at91rm9200_devices.c:1176: warning: 'struct at91_uart_config' declared inside parameter list arch/arm/mach-at91/at91rm9200_devices.c:1176: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: fix typo in at91_pmc_base assembly declarationNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: Export at91_matrix_baseJoachim Eastwood
at91_matrix_* macro's are used by at91_udc usb gadget driver, which can be built as module, therefore we need to export the variable containing matrix base address. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: Export at91_pmc_baseJoachim Eastwood
After commit b55149529d26 (ARM: at91/PMC: make register base soc independent) building atmel_usba_udc as a module fails with following message ERROR: "at91_pmc_base" [drivers/usb/gadget/atmel_usba_udc.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Export symbol to allow driver to be built as a module again. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: Export at91_ramc_baseJoachim Eastwood
After commit f363c40 (ARM: at91: make sdram/ddr register base soc independent) building at91_cf as a module fails with: ERROR: "at91_ramc_base" [drivers/pcmcia/at91_cf.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Export at91_ramc_base symbol to allow drivers using at91_ramc_* functions to be built as modules again. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> [nicolas.ferre@atmel.com: modify slightly commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: Export at91_st_baseJoachim Eastwood
After commit 5e9cf5e (ARM: at91: make ST (System Timer) soc independent) building at91rm9200_wdt as a module fails with following message ERROR: "at91_st_base" [drivers/watchdog/at91rm9200_wdt.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Export symbol to allow wdt driver to be built as a module again. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> [nicolas.ferre@atmel.com: use EXPORT_SYMBOL_GPL()] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: ux500: update defconfigLinus Walleij
Some new drivers and changed Kconfig dependencies for the v3.4 kernel affecting the U8500 defconfig: - The SOC config options are now brought in by default - No need to explicitly select misc devices anymore - I2C is selected by default - We now have support for charging from the AB8500 so compile in this - The regulator framework needs to be explictly selected Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-16ARM: ux500: Fix unmet direct dependencyLee Jones
A recent change to a Kconfig configuration saw MACH_U8500 remove TPS6105X selection. In doing so Kconfig stopped selecting REGULATORS, which is still required. This patch sees UX500_SOC_DB8500 explicitly select it instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-15Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Nothing too disasterous, the biggest thing being the removal of the regulator support for vcore in the AMBA driver; only one SoC was using this and it got broken during the last merge window, which then started causing problems for other people. Mutual agreement was reached for it to be removed." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7386/1: jump_label: fixup for rename to static_key ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEE ARM: 7382/1: mm: truncate memory banks to fit in 4GB space for classic MMU ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus ARM: 7383/1: nommu: populate vectors page from paging_init ARM: 7381/1: nommu: fix typo in mm/Kconfig ARM: 7380/1: DT: do not add a zero-sized memory property ARM: 7379/1: DT: fix atags_to_fdt() second call site ARM: 7366/3: amba: Remove AMBA level regulator support ARM: 7377/1: vic: re-read status register before dispatching each IRQ handler ARM: 7368/1: fault.c: correct how the tsk->[maj|min]_flt gets incremented
2012-04-15ARM: 7386/1: jump_label: fixup for rename to static_keyRabin Vincent
c5905afb0 ("static keys: Introduce 'struct static_key'...") renamed struct jump_label_key to struct static_key. Fixup ARM for this to eliminate these build warnings: include/linux/jump_label.h:113:2: warning: passing argument 1 of 'arch_static_branch' from incompatible pointer type include/asm/jump_label.h:17:82: note: expected 'struct jump_label_key *' but argument is of type 'struct static_key *' Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-15ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEEJonathan Austin
Currently when ThumbEE is not enabled (!CONFIG_ARM_THUMBEE) the ThumbEE register states are not saved/restored at context switch. The default state of the ThumbEE Ctrl register (TEECR) allows userspace accesses to the ThumbEE Base Handler register (TEEHBR). This can cause unexpected behaviour when people use ThumbEE on !CONFIG_ARM_THUMBEE kernels, as well as allowing covert communication - eg between userspace tasks running inside chroot jails. This patch sets up TEECR in order to prevent user-space access to TEEHBR when !CONFIG_ARM_THUMBEE. In this case, tasks are sent SIGILL if they try to access TEEHBR. Cc: stable@vger.kernel.org Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-15ARM: 7382/1: mm: truncate memory banks to fit in 4GB space for classic MMUWill Deacon
If a bank of memory spanning the 4GB boundary is added on a !CONFIG_LPAE kernel then we will hang early during boot since the memory bank will have wrapped around to zero. This patch truncates memory banks for !LPAE configurations when the end address is not representable in 32 bits. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-15ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpusLinus Walleij
During booting of cpu1, there is a short window where cpu1 is online, but not active where cpu1 is occupied by waiting to become active. If cpu0 then decides to schedule something on cpu1 and wait for it to complete, before cpu0 has set cpu1 active, we have a deadlock. Typically it's this CPU frequency transition that happens at this time, so let's just not wait for it to happen, it will happen whenever the CPU eventually comes online instead. Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@kernel.org Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-by: Rickard Andersson <rickard.andersson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-14Merge branch 'v3.4-samsung-fixes-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.4-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Fix Kconfig dependencies for device tree enabled machine files ARM: EXYNOS: Remove broken config values for touchscren for NURI board ARM: EXYNOS: set fix xusbxti clock for NURI and Universal210 boards ARM: EXYNOS: fix regulator name for NURI board ARM: SAMSUNG: make SAMSUNG_PM_DEBUG select DEBUG_LL ARM: EXYNOS: Add PDMA and MDMA physical base address defines ARM: S5PV210: Fix compiler warning in dma.c file ARM: EXYNOS: Fix compile error in exynos5250-cpufreq.c ARM: EXYNOS: Add missing definition for IRQ_I2S0 ARM: S5PV210: fix unused LDO supply field from wm8994_pdata
2012-04-14ARM: OMAP: clock: cleanup CPUfreq leftovers, fix build errorsKevin Hilman
Now that we have OPP layer, and OMAP CPUfreq driver is using it, we no longer need/use the clock framework code for filling up CPUfreq tables. Remove it. Removing this code also eliminates build errors when CPU_FREQ_TABLE support is not enabled. Thanks to Russell King for pointing out the parts I missed under plat-omap in the original version and also pointing out the build errors when CPUFREQ_TABLE support was not enabled. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kevin Hilman <khilman@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-04-14ARM: dts: remove blank interrupt-parent propertiesRob Herring
These were incorrectly introduced and can cause problems for of_irq_init. The correct way to define a root controller is no interrupt-parent set at all or the interrupt-parent is set to the root controller itself when inherited from a parent node. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Tested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-04-14ARM: EXYNOS: Fix Kconfig dependencies for device tree enabled machine filesSachin Kamat
Add config dependency for Exynos4 and Exynos5 device tree enabled machine files on config options ARCH_EXYNOS4 and ARCH_EXYNOS5 respectively. Enabling machine support without proper ARCH support enabled is incorrect. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-14ARM: EXYNOS: Remove broken config values for touchscren for NURI boardMarek Szyprowski
The atmel_mxt_ts driver has been extended to support more 'configuration objects' in commit 81c88a711 ("Input: atmel_mxt_ts - update object list"), what broke the configuration values for NURI board. These values are optional anyway, so remove them to get the driver working correctly. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-14ARM: EXYNOS: set fix xusbxti clock for NURI and Universal210 boardsMarek Szyprowski
On some versions of NURI and UniversalC210 boards, camera clocks are routed directly to xusbxti clock source. This patch sets the correct value for this clock to let usb and camera sensors to work correctly and avoid division by zero on driver's probe. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-14ARM: EXYNOS: fix regulator name for NURI boardMarek Szyprowski
Regulator names should not contain slash to avoid issues with debugfs. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-14ARM: SAMSUNG: make SAMSUNG_PM_DEBUG select DEBUG_LLMaurus Cuelenaere
When selecting SAMSUNG_PM_DEBUG, it complains about a missing printascii() function if you do not select DEBUG_LL, so make the former select the latter. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-13Merge tag 'omap-fixes-b-for-3.4rc' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes A few OMAP hwmod fixes against v3.4-rc2. One of them is a reversion of a previous v3.4-rc patch that caused some regressions, and upon further review, appears not to be necessary. The other two are fairly minor.
2012-04-13ARM: msm: Fix section mismatches in proc_comm.cDavid Brown
The change commit 4416e9eb0b4859b3d28016c5fd0a609bdcbc8a2a Author: Gregory Bean <gbean@codeaurora.org> Date: Wed Jul 28 10:22:12 2010 -0700 arm: msm: Fix section mismatch in smd.c. fixes a section mismatch between the board file and the smd driver's probe function, however, it misses the additional mismatches between the probe function and some routines it calls. Fix these up as well. Signed-off-by: David Brown <davidb@codeaurora.org>
2012-04-13arm: msm: trout: fix compile failureDaniel Walker
Fixes the following warnings, arch/arm/mach-msm/board-trout.c: In function 'trout_init': arch/arm/mach-msm/board-trout.c:71: error: 'system_rev' undeclared (first use in this function) arch/arm/mach-msm/board-trout.c:71: error: (Each undeclared identifier is reported only once arch/arm/mach-msm/board-trout.c:71: error: for each function it appears in.) and arch/arm/mach-msm/board-trout-panel.c: In function 'trout_init_panel': arch/arm/mach-msm/board-trout-panel.c:267: error: 'system_rev' undeclared (first use in this function) arch/arm/mach-msm/board-trout-panel.c:267: error: (Each undeclared identifier is reported only once arch/arm/mach-msm/board-trout-panel.c:267: error: for each function it appears in.) This came in with the following commit 9f97da78bf018206fb623cd351d454af2f105fe0 which removes asm/system.h Signed-off-by: Daniel Walker <dwalker@fifo99.com> cc: David Howells <dhowells@redhat.com> cc: Bryan Huntsman <bryanh@codeaurora.org> cc: linux-arm-msm@vger.kernel.org cc: linux-arm-kernel@lists.infradead.org Signed-off-by: David Brown <davidb@codeaurora.org>
2012-04-13arm: msm: halibut: remove unneeded fixupDaniel Walker
This old fixup causes a build failure, so I remove it just like in trout. Signed-off-by: Daniel Walker <dwalker@fifo99.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2012-04-13ARM: 7383/1: nommu: populate vectors page from paging_initWill Deacon
Commit 94e5a85b ("ARM: earlier initialization of vectors page") made it the responsibility of paging_init to initialise the vectors page. This patch adds a call to early_trap_init for the !CONFIG_MMU case, placing the vectors at CONFIG_VECTORS_BASE. Cc: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-13ARM: 7381/1: nommu: fix typo in mm/KconfigWill Deacon
The description for the CPU_HIGH_VECTOR Kconfig option for nommu builds doesn't make any sense. This patch fixes up the trivial grammatical error. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-13ARM: 7380/1: DT: do not add a zero-sized memory propertyMarc Zyngier
Some bootloaders are broken enough to expose an ATAG_MEM with a null size. Converting such tag to a memory node leads to an unbootable system. Skip over zero sized ATAG_MEM to avoid this situation. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>