| Age | Commit message (Collapse) | Author |
|---|
|
Support for deprecated instructions can be enabled or disabled at
runtime. To handle this, the code in armv8_deprecated.c registers and
unregisters undef_hooks, and makes cross CPU calls to configure HW
support. This is rather complicated, and the synchronization required to
make this safe ends up serializing the handling of instructions which
have been trapped.
This patch simplifies the deprecated instruction handling by removing
the dynamic registration and unregistration, and changing the trap
handling code to determine whether a handler should be invoked. This
removes the need for dynamic list management, and simplifies the locking
requirements, making it possible to handle trapped instructions entirely
in parallel.
Where changing the emulation state requires a cross-call, this is
serialized by locally disabling interrupts, ensuring that the CPU is not
left in an inconsistent state.
To simplify sysctl management, each insn_emulation is given a separate
sysctl table, permitting these to be registered separately. The core
sysctl code will iterate over all of these when walking sysfs.
I've tested this with userspace programs which use each of the
deprecated instructions, and I've concurrently modified the support
level for each of the features back-and-forth between HW and emulated to
check that there are no spurious SIGILLs sent to userspace when the
support level is changed.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221019144123.612388-10-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On CPUs without FEAT_IDST, ID register emulation is slower than it needs
to be, as all threads contend for the same lock to perform the
emulation. This patch reworks the emulation to avoid this unnecessary
contention.
On CPUs with FEAT_IDST (which is mandatory from ARMv8.4 onwards), EL0
accesses to ID registers result in a SYS trap, and emulation of these is
handled with a sys64_hook. These hooks are statically allocated, and no
locking is required to iterate through the hooks and perform the
emulation, allowing emulation to occur in parallel with no contention.
On CPUs without FEAT_IDST, EL0 accesses to ID registers result in an
UNDEFINED exception, and emulation of these accesses is handled with an
undef_hook. When an EL0 MRS instruction is trapped to EL1, the kernel
finds the relevant handler by iterating through all of the undef_hooks,
requiring undef_lock to be held during this lookup.
This locking is only required to safely traverse the list of undef_hooks
(as it can be concurrently modified), and the actual emulation of the
MRS does not require any mutual exclusion. This locking is an
unfortunate bottleneck, especially given that MRS emulation is enabled
unconditionally and is never disabled.
This patch reworks the non-FEAT_IDST MRS emulation logic so that it can
be invoked directly from do_el0_undef(). This removes the bottleneck,
allowing MRS traps to be handled entirely in parallel, and is a stepping
stone to making all of the undef_hooks lock-free.
I've tested this in a 64-vCPU VM on a 64-CPU ThunderX2 host, with a
benchmark which spawns a number of threads which each try to read
ID_AA64ISAR0_EL1 1000000 times. This is vastly more contention than will
ever be seen in realistic usage, but clearly demonstrates the removal of
the bottleneck:
| Threads || Time (seconds) |
| || Before || After |
| || Real | System || Real | System |
|---------++--------+---------++--------+---------|
| 1 || 0.29 | 0.20 || 0.24 | 0.12 |
| 2 || 0.35 | 0.51 || 0.23 | 0.27 |
| 4 || 1.08 | 3.87 || 0.24 | 0.56 |
| 8 || 4.31 | 33.60 || 0.24 | 1.11 |
| 16 || 9.47 | 149.39 || 0.23 | 2.15 |
| 32 || 19.07 | 605.27 || 0.24 | 4.38 |
| 64 || 65.40 | 3609.09 || 0.33 | 11.27 |
Aside from the speedup, there should be no functional change as a result
of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221019144123.612388-6-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Subsequent patches will rework EL0 UNDEF handling, removing the need for
struct undef_hook and call_undef_hook. In preparation for those changes,
this patch factors the logic for reading user instructions out of
call_undef_hook() and into a new user_insn_read() helper, matching the
style of the existing aarch64_insn_read() helper used for reading kernel
instructions.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221019144123.612388-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently call_undef_hook() is used to handle UNDEFINED exceptions from
EL0 and EL1. As support for deprecated instructions may be enabled
independently, the handlers for individual instructions are organised as
a linked list of struct undef_hook which can be manipulated dynamically.
As this can be manipulated dynamically, the list is protected with a
raw_spinlock which must be acquired when handling UNDEFINED exceptions
or when manipulating the list of handlers.
This locking is unfortunate as it serialises handling of UNDEFINED
exceptions, and requires RCU to be enabled for lockdep, requiring the
use of RCU_NONIDLE() in resume path of cpu_suspend() since commit:
a2c42bbabbe260b7 ("arm64: spectre: Prevent lockdep splat on v4 mitigation enable path")
The list of UNDEFINED handlers largely consist of handlers for
exceptions taken from EL0, and the only handler for exceptions taken
from EL1 handles `MSR SSBS, #imm` on CPUs which feature PSTATE.SSBS but
lack the corresponding MSR (Immediate) instruction. Other than this we
never expect to take an UNDEFINED exception from EL1 in normal
operation.
This patch reworks do_el0_undef() to invoke the EL1 SSBS handler
directly, relegating call_undef_hook() to only handle EL0 UNDEFs. This
removes redundant work to iterate the list for EL1 UNDEFs, and removes
the need for locking, permitting EL1 UNDEFs to be handled in parallel
without contention.
The RCU_NONIDLE() call in cpu_suspend() will be removed in a subsequent
patch, as there are other potential issues with the use of
instrumentable code and RCU in the CPU suspend code.
I've tested this by forcing the detection of SSBS on a CPU that doesn't
have it, and verifying that the try_emulate_el1_ssbs() callback is
invoked.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221019144123.612388-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In general, exceptions taken from EL1 need to be handled separately from
exceptions taken from EL0, as the logic to handle the two cases can be
significantly divergent, and exceptions taken from EL1 typically have
more stringent requirements on locking and instrumentation.
Subsequent patches will rework the way EL1 UNDEFs are handled in order
to address longstanding soundness issues with instrumentation and RCU.
In preparation for that rework, this patch splits the existing
do_undefinstr() handler into separate do_el0_undef() and do_el1_undef()
handlers.
Prior to this patch, do_undefinstr() was marked with NOKPROBE_SYMBOL(),
preventing instrumentation via kprobes. However, do_undefinstr() invokes
other code which can be instrumented, and:
* For UNDEFINED exceptions taken from EL0, there is no risk of recursion
within kprobes. Therefore it is safe for do_el0_undef to be
instrumented with kprobes, and it does not need to be marked with
NOKPROBE_SYMBOL().
* For UNDEFINED exceptions taken from EL1, either:
(a) The exception is has been taken when manipulating SSBS; these cases
are limited and do not occur within code that can be invoked
recursively via kprobes. Hence, in these cases instrumentation
with kprobes is benign.
(b) The exception has been taken for an unknown reason, as other than
manipulating SSBS we do not expect to take UNDEFINED exceptions
from EL1. Any handling of these exception is best-effort.
... and in either case, marking do_el1_undef() with NOKPROBE_SYMBOL()
isn't sufficient to prevent recursion via kprobes as functions it
calls (including die()) are instrumentable via kprobes.
Hence, it's not worthwhile to mark do_el1_undef() with
NOKPROBE_SYMBOL(). The same applies to do_el1_bti() and do_el1_fpac(),
so their NOKPROBE_SYMBOL() annotations are also removed.
Aside from the new instrumentability, there should be no functional
change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221019144123.612388-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently do_sysinstr() and do_cp15instr() are marked with
NOKPROBE_SYMBOL(). However, these are only called for exceptions taken
from EL0, and there is no risk of recursion in kprobes, so this is not
necessary.
Remove the NOKPROBE_SYMBOL() annotation, and rename the two functions to
more clearly indicate that these are solely for exceptions taken from
EL0, better matching the names used by the lower level entry points in
entry-common.c.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221019144123.612388-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- arm64 perf: DDR PMU driver for Alibaba's T-Head Yitian 710 SoC, SVE
vector granule register added to the user regs together with SVE perf
extensions documentation.
- SVE updates: add HWCAP for SVE EBF16, update the SVE ABI
documentation to match the actual kernel behaviour (zeroing the
registers on syscall rather than "zeroed or preserved" previously).
- More conversions to automatic system registers generation.
- vDSO: use self-synchronising virtual counter access in gettimeofday()
if the architecture supports it.
- arm64 stacktrace cleanups and improvements.
- arm64 atomics improvements: always inline assembly, remove LL/SC
trampolines.
- Improve the reporting of EL1 exceptions: rework BTI and FPAC
exception handling, better EL1 undefs reporting.
- Cortex-A510 erratum 2658417: remove BF16 support due to incorrect
result.
- arm64 defconfig updates: build CoreSight as a module, enable options
necessary for docker, memory hotplug/hotremove, enable all PMUs
provided by Arm.
- arm64 ptrace() support for TPIDR2_EL0 (register provided with the SME
extensions).
- arm64 ftraces updates/fixes: fix module PLTs with mcount, remove
unused function.
- kselftest updates for arm64: simple HWCAP validation, FP stress test
improvements, validation of ZA regs in signal handlers, include
larger SVE and SME vector lengths in signal tests, various cleanups.
- arm64 alternatives (code patching) improvements to robustness and
consistency: replace cpucap static branches with equivalent
alternatives, associate callback alternatives with a cpucap.
- Miscellaneous updates: optimise kprobe performance of patching
single-step slots, simplify uaccess_mask_ptr(), move MTE registers
initialisation to C, support huge vmalloc() mappings, run softirqs on
the per-CPU IRQ stack, compat (arm32) misalignment fixups for
multiword accesses.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (126 commits)
arm64: alternatives: Use vdso/bits.h instead of linux/bits.h
arm64/kprobe: Optimize the performance of patching single-step slot
arm64: defconfig: Add Coresight as module
kselftest/arm64: Handle EINTR while reading data from children
kselftest/arm64: Flag fp-stress as exiting when we begin finishing up
kselftest/arm64: Don't repeat termination handler for fp-stress
ARM64: reloc_test: add __init/__exit annotations to module init/exit funcs
arm64/mm: fold check for KFENCE into can_set_direct_map()
arm64: ftrace: fix module PLTs with mcount
arm64: module: Remove unused plt_entry_is_initialized()
arm64: module: Make plt_equals_entry() static
arm64: fix the build with binutils 2.27
kselftest/arm64: Don't enable v8.5 for MTE selftest builds
arm64: uaccess: simplify uaccess_mask_ptr()
arm64: asm/perf_regs.h: Avoid C++-style comment in UAPI header
kselftest/arm64: Fix typo in hwcap check
arm64: mte: move register initialization to C
arm64: mm: handle ARM64_KERNEL_USES_PMD_MAPS in vmemmap_populate()
arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()
arm64/sve: Add Perf extensions documentation
...
|
|
With -fsanitize=kcfi, CFI always traps. Add arm64 support for handling CFI
failures. The registers containing the target address and the expected type
are encoded in the first ten bits of the ESR as follows:
- 0-4: n, where the register Xn contains the target address
- 5-9: m, where the register Wm contains the type hash
This produces the following oops on CFI failure (generated using lkdtm):
[ 21.885179] CFI failure at lkdtm_indirect_call+0x2c/0x44 [lkdtm]
(target: lkdtm_increment_int+0x0/0x1c [lkdtm]; expected type: 0x7e0c52a)
[ 21.886593] Internal error: Oops - CFI: 0 [#1] PREEMPT SMP
[ 21.891060] Modules linked in: lkdtm
[ 21.893363] CPU: 0 PID: 151 Comm: sh Not tainted
5.19.0-rc1-00021-g852f4e48dbab #1
[ 21.895560] Hardware name: linux,dummy-virt (DT)
[ 21.896543] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 21.897583] pc : lkdtm_indirect_call+0x2c/0x44 [lkdtm]
[ 21.898551] lr : lkdtm_CFI_FORWARD_PROTO+0x3c/0x6c [lkdtm]
[ 21.899520] sp : ffff8000083a3c50
[ 21.900191] x29: ffff8000083a3c50 x28: ffff0000027e0ec0 x27: 0000000000000000
[ 21.902453] x26: 0000000000000000 x25: ffffc2aa3d07e7b0 x24: 0000000000000002
[ 21.903736] x23: ffffc2aa3d079088 x22: ffffc2aa3d07e7b0 x21: ffff000003379000
[ 21.905062] x20: ffff8000083a3dc0 x19: 0000000000000012 x18: 0000000000000000
[ 21.906371] x17: 000000007e0c52a5 x16: 000000003ad55aca x15: ffffc2aa60d92138
[ 21.907662] x14: ffffffffffffffff x13: 2e2e2e2065707974 x12: 0000000000000018
[ 21.909775] x11: ffffc2aa62322b88 x10: ffffc2aa62322aa0 x9 : c7e305fb5195d200
[ 21.911898] x8 : ffffc2aa3d077e20 x7 : 6d20676e696c6c61 x6 : 43203a6d74646b6c
[ 21.913108] x5 : ffffc2aa6266c9df x4 : ffffc2aa6266c9e1 x3 : ffff8000083a3968
[ 21.914358] x2 : 80000000fffff122 x1 : 00000000fffff122 x0 : ffffc2aa3d07e8f8
[ 21.915827] Call trace:
[ 21.916375] lkdtm_indirect_call+0x2c/0x44 [lkdtm]
[ 21.918060] lkdtm_CFI_FORWARD_PROTO+0x3c/0x6c [lkdtm]
[ 21.919030] lkdtm_do_action+0x34/0x4c [lkdtm]
[ 21.919920] direct_entry+0x170/0x1ac [lkdtm]
[ 21.920772] full_proxy_write+0x84/0x104
[ 21.921759] vfs_write+0x188/0x3d8
[ 21.922387] ksys_write+0x78/0xe8
[ 21.922986] __arm64_sys_write+0x1c/0x2c
[ 21.923696] invoke_syscall+0x58/0x134
[ 21.924554] el0_svc_common+0xb4/0xf4
[ 21.925603] do_el0_svc+0x2c/0xb4
[ 21.926563] el0_svc+0x2c/0x7c
[ 21.927147] el0t_64_sync_handler+0x84/0xf0
[ 21.927985] el0t_64_sync+0x18c/0x190
[ 21.929133] Code: 728a54b1 72afc191 6b11021f 54000040 (d4304500)
[ 21.930690] ---[ end trace 0000000000000000 ]---
[ 21.930971] Kernel panic - not syncing: Oops - CFI: Fatal exception
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220908215504.3686827-11-samitolvanen@google.com
|
|
If a BTI exception is taken from EL1, the entry code will treat this as
an unhandled exception and will panic() the kernel. This is inconsistent
with the way we handle FPAC exceptions, which have a dedicated handler
and only necessarily kill the thread from which the exception was taken
from, and we don't log all the information that could be relevant to
debug the issue.
The code in do_bti() has:
BUG_ON(!user_mode(regs));
... and it seems like the intent was to call this for EL1 BTI
exceptions, as with FPAC, but this was omitted due to an oversight.
This patch adds separate EL0 and EL1 BTI exception handlers, with the
latter calling die() directly to report the original context the BTI
exception was taken from. This matches our handling of FPAC exceptions.
Prior to this patch, a BTI failure is reported as:
| Unhandled 64-bit el1h sync exception on CPU0, ESR 0x0000000034000002 -- BTI
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc3-00131-g7d937ff0221d-dirty #9
| Hardware name: linux,dummy-virt (DT)
| pstate: 20400809 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=-c)
| pc : test_bti_callee+0x4/0x10
| lr : test_bti_caller+0x1c/0x28
| sp : ffff80000800bdf0
| x29: ffff80000800bdf0 x28: 0000000000000000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: ffff80000a2b8000 x22: 0000000000000000 x21: 0000000000000000
| x20: ffff8000099fa5b0 x19: ffff800009ff7000 x18: fffffbfffda37000
| x17: 3120676e696d7573 x16: 7361202c6e6f6974 x15: 0000000041a90000
| x14: 0040000000000041 x13: 0040000000000001 x12: ffff000001a90000
| x11: fffffbfffda37480 x10: 0068000000000703 x9 : 0001000040000000
| x8 : 0000000000090000 x7 : 0068000000000f03 x6 : 0060000000000f83
| x5 : ffff80000a2b6000 x4 : ffff0000028d0000 x3 : ffff800009f78378
| x2 : 0000000000000000 x1 : 0000000040210000 x0 : ffff8000080257e4
| Kernel panic - not syncing: Unhandled exception
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc3-00131-g7d937ff0221d-dirty #9
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace.part.0+0xcc/0xe0
| show_stack+0x18/0x5c
| dump_stack_lvl+0x64/0x80
| dump_stack+0x18/0x34
| panic+0x170/0x360
| arm64_exit_nmi.isra.0+0x0/0x80
| el1h_64_sync_handler+0x64/0xd0
| el1h_64_sync+0x64/0x68
| test_bti_callee+0x4/0x10
| smp_cpus_done+0xb0/0xbc
| smp_init+0x7c/0x8c
| kernel_init_freeable+0x128/0x28c
| kernel_init+0x28/0x13c
| ret_from_fork+0x10/0x20
With this patch applied, a BTI failure is reported as:
| Internal error: Oops - BTI: 0000000034000002 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc3-00132-g0ad98265d582-dirty #8
| Hardware name: linux,dummy-virt (DT)
| pstate: 20400809 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=-c)
| pc : test_bti_callee+0x4/0x10
| lr : test_bti_caller+0x1c/0x28
| sp : ffff80000800bdf0
| x29: ffff80000800bdf0 x28: 0000000000000000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: ffff80000a2b8000 x22: 0000000000000000 x21: 0000000000000000
| x20: ffff8000099fa5b0 x19: ffff800009ff7000 x18: fffffbfffda37000
| x17: 3120676e696d7573 x16: 7361202c6e6f6974 x15: 0000000041a90000
| x14: 0040000000000041 x13: 0040000000000001 x12: ffff000001a90000
| x11: fffffbfffda37480 x10: 0068000000000703 x9 : 0001000040000000
| x8 : 0000000000090000 x7 : 0068000000000f03 x6 : 0060000000000f83
| x5 : ffff80000a2b6000 x4 : ffff0000028d0000 x3 : ffff800009f78378
| x2 : 0000000000000000 x1 : 0000000040210000 x0 : ffff800008025804
| Call trace:
| test_bti_callee+0x4/0x10
| smp_cpus_done+0xb0/0xbc
| smp_init+0x7c/0x8c
| kernel_init_freeable+0x128/0x28c
| kernel_init+0x28/0x13c
| ret_from_fork+0x10/0x20
| Code: d50323bf d53cd040 d65f03c0 d503233f (d50323bf)
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220913101732.3925290-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
If an FPAC exception is taken from EL1, the entry code will call
do_ptrauth_fault(), where due to:
BUG_ON(!user_mode(regs))
... the kernel will report a problem within do_ptrauth_fault() rather
than reporting the original context the FPAC exception was taken from.
The pt_regs and ESR value reported will be from within
do_ptrauth_fault() and the code dump will be for the BRK in BUG_ON(),
which isn't sufficient to debug the cause of the original exception.
This patch makes the reporting better by having separate EL0 and EL1
FPAC exception handlers, with the latter calling die() directly to
report the original context the FPAC exception was taken from.
Note that we only need to prevent kprobes of the EL1 FPAC handler, since
the EL0 FPAC handler cannot be called recursively.
For consistency with do_el0_svc*(), I've named the split functions
do_el{0,1}_fpac() rather than do_el{0,1}_ptrauth_fault(). I've also
clarified the comment to not imply there are casues other than FPAC
exceptions.
Prior to this patch FPAC exceptions are reported as:
| kernel BUG at arch/arm64/kernel/traps.c:517!
| Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc3-00130-g9c8a180a1cdf-dirty #12
| Hardware name: FVP Base RevC (DT)
| pstate: 00400009 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : do_ptrauth_fault+0x3c/0x40
| lr : el1_fpac+0x34/0x54
| sp : ffff80000a3bbc80
| x29: ffff80000a3bbc80 x28: ffff0008001d8000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: 0000000020400009 x22: ffff800008f70fa4 x21: ffff80000a3bbe00
| x20: 0000000072000000 x19: ffff80000a3bbcb0 x18: fffffbfffda37000
| x17: 3120676e696d7573 x16: 7361202c6e6f6974 x15: 0000000081a90000
| x14: 0040000000000041 x13: 0040000000000001 x12: ffff000001a90000
| x11: fffffbfffda37480 x10: 0068000000000703 x9 : 0001000080000000
| x8 : 0000000000090000 x7 : 0068000000000f03 x6 : 0060000000000783
| x5 : ffff80000a3bbcb0 x4 : ffff0008001d8000 x3 : 0000000072000000
| x2 : 0000000000000000 x1 : 0000000020400009 x0 : ffff80000a3bbcb0
| Call trace:
| do_ptrauth_fault+0x3c/0x40
| el1h_64_sync_handler+0xc4/0xd0
| el1h_64_sync+0x64/0x68
| test_pac+0x8/0x10
| smp_init+0x7c/0x8c
| kernel_init_freeable+0x128/0x28c
| kernel_init+0x28/0x13c
| ret_from_fork+0x10/0x20
| Code: 97fffe5e a8c17bfd d50323bf d65f03c0 (d4210000)
With this patch applied FPAC exceptions are reported as:
| Internal error: Oops - FPAC: 0000000072000000 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc3-00132-g78846e1c4757-dirty #11
| Hardware name: FVP Base RevC (DT)
| pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : test_pac+0x8/0x10
| lr : 0x0
| sp : ffff80000a3bbe00
| x29: ffff80000a3bbe00 x28: 0000000000000000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: ffff80000a2c8000 x22: 0000000000000000 x21: 0000000000000000
| x20: ffff8000099fa5b0 x19: ffff80000a007000 x18: fffffbfffda37000
| x17: 3120676e696d7573 x16: 7361202c6e6f6974 x15: 0000000081a90000
| x14: 0040000000000041 x13: 0040000000000001 x12: ffff000001a90000
| x11: fffffbfffda37480 x10: 0068000000000703 x9 : 0001000080000000
| x8 : 0000000000090000 x7 : 0068000000000f03 x6 : 0060000000000783
| x5 : ffff80000a2c6000 x4 : ffff0008001d8000 x3 : ffff800009f88378
| x2 : 0000000000000000 x1 : 0000000080210000 x0 : ffff000001a90000
| Call trace:
| test_pac+0x8/0x10
| smp_init+0x7c/0x8c
| kernel_init_freeable+0x128/0x28c
| kernel_init+0x28/0x13c
| ret_from_fork+0x10/0x20
| Code: d50323bf d65f03c0 d503233f aa1f03fe (d50323bf)
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220913101732.3925290-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently, bug_handler() and kasan_handler() call die() with '0' as the
'err' value, whereas die_kernel_fault() passes the ESR_ELx value.
For consistency, this patch ensures we always pass the ESR_ELx value to
die(). As this is only called for exceptions taken from kernel mode,
there should be no user-visible change as a result of this patch.
For UNDEFINED exceptions, I've had to modify do_undefinstr() and its
callers to pass the ESR_ELx value. In all cases the ESR_ELx value had
already been read and was available.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220913101732.3925290-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Recently, we reworked a lot of code to consistentlt pass ESR_ELx as a
64-bit quantity. However, we missed that this can be passed into die()
and __die() as the 'err' parameter where it is truncated to a 32-bit
int.
As notify_die() already takes 'err' as a long, this patch changes die()
and __die() to also take 'err' as a long, ensuring that the full value
of ESR_ELx is retained.
At the same time, die() is updated to consistently log 'err' as a
zero-padded 64-bit quantity.
Subsequent patches will pass the ESR_ELx value to die() for a number of
exceptions.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220913101732.3925290-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
If an UNDEFINED exception is taken from EL1, and do_undefinstr() doesn't
find any suitable undef_hook, it will call:
BUG_ON(!user_mode(regs))
... and the kernel will report a failure witin do_undefinstr() rather
than reporting the original context that the UNDEFINED exception was
taken from. The pt_regs and ESR value reported within the BUG() handler
will be from within do_undefinstr() and the code dump will be for the
BRK in BUG_ON(), which isn't sufficient to debug the cause of the
original exception.
This patch makes the reporting better by having do_undefinstr() call
die() directly in this case to report the original context from which
the UNDEFINED exception was taken.
Prior to this patch, an undefined instruction is reported as:
| kernel BUG at arch/arm64/kernel/traps.c:497!
| Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 0 Comm: swapper Not tainted 5.19.0-rc3-00127-geff044f1b04e-dirty #3
| Hardware name: linux,dummy-virt (DT)
| pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : do_undefinstr+0x28c/0x2ac
| lr : do_undefinstr+0x298/0x2ac
| sp : ffff800009f63bc0
| x29: ffff800009f63bc0 x28: ffff800009f73c00 x27: ffff800009644a70
| x26: ffff8000096778a8 x25: 0000000000000040 x24: 0000000000000000
| x23: 00000000800000c5 x22: ffff800009894060 x21: ffff800009f63d90
| x20: 0000000000000000 x19: ffff800009f63c40 x18: 0000000000000006
| x17: 0000000000403000 x16: 00000000bfbfd000 x15: ffff800009f63830
| x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000019
| x11: 0101010101010101 x10: 0000000000161b98 x9 : 0000000000000000
| x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
| x5 : ffff800009f761d0 x4 : 0000000000000000 x3 : ffff80000a2b80f8
| x2 : 0000000000000000 x1 : ffff800009f73c00 x0 : 00000000800000c5
| Call trace:
| do_undefinstr+0x28c/0x2ac
| el1_undef+0x2c/0x4c
| el1h_64_sync_handler+0x84/0xd0
| el1h_64_sync+0x64/0x68
| setup_arch+0x550/0x598
| start_kernel+0x88/0x6ac
| __primary_switched+0xb8/0xc0
| Code: 17ffff95 a9425bf5 17ffffb8 a9025bf5 (d4210000)
With this patch applied, an undefined instruction is reported as:
| Internal error: Oops - Undefined instruction: 0 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 0 Comm: swapper Not tainted 5.19.0-rc3-00128-gf27cfcc80e52-dirty #5
| Hardware name: linux,dummy-virt (DT)
| pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : setup_arch+0x550/0x598
| lr : setup_arch+0x50c/0x598
| sp : ffff800009f63d90
| x29: ffff800009f63d90 x28: 0000000081000200 x27: ffff800009644a70
| x26: ffff8000096778c8 x25: 0000000000000040 x24: 0000000000000000
| x23: 0000000000000100 x22: ffff800009f69a58 x21: ffff80000a2b80b8
| x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000006
| x17: 0000000000403000 x16: 00000000bfbfd000 x15: ffff800009f63830
| x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000019
| x11: 0101010101010101 x10: 0000000000161b98 x9 : 0000000000000000
| x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
| x5 : 0000000000000008 x4 : 0000000000000010 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
| Call trace:
| setup_arch+0x550/0x598
| start_kernel+0x88/0x6ac
| __primary_switched+0xb8/0xc0
| Code: b4000080 90ffed80 912ac000 97db745f (00000000)
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220913101732.3925290-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
cache.h contains some defines which are used to represent fields and
enumeration values which do not follow the standard naming convention used for
when we automatically generate defines for system registers. Update the
names of the constants to reflect standardised naming and move them to
sysreg.h.
There is also a helper CTR_L1IP() which was open coded and has been
converted to use SYS_FIELD_GET().
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-7-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
* for-next/esr-elx-64-bit:
: Treat ESR_ELx as a 64-bit register.
KVM: arm64: uapi: Add kvm_debug_exit_arch.hsr_high
KVM: arm64: Treat ESR_EL2 as a 64-bit register
arm64: Treat ESR_ELx as a 64-bit register
arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall
arm64: Make ESR_ELx_xVC_IMM_MASK compatible with assembly
|
|
In the initial release of the ARM Architecture Reference Manual for
ARMv8-A, the ESR_ELx registers were defined as 32-bit registers. This
changed in 2018 with version D.a (ARM DDI 0487D.a) of the architecture,
when they became 64-bit registers, with bits [63:32] defined as RES0. In
version G.a, a new field was added to ESR_ELx, ISS2, which covers bits
[36:32]. This field is used when the Armv8.7 extension FEAT_LS64 is
implemented.
As a result of the evolution of the register width, Linux stores it as
both a 64-bit value and a 32-bit value, which hasn't affected correctness
so far as Linux only uses the lower 32 bits of the register.
Make the register type consistent and always treat it as 64-bit wide. The
register is redefined as an "unsigned long", which is an unsigned
double-word (64-bit quantity) for the LP64 machine (aapcs64 [1], Table 1,
page 14). The type was chosen because "unsigned int" is the most frequent
type for ESR_ELx and because FAR_ELx, which is used together with ESR_ELx
in exception handling, is also declared as "unsigned long". The 64-bit type
also makes adding support for architectural features that use fields above
bit 31 easier in the future.
The KVM hypervisor will receive a similar update in a subsequent patch.
[1] https://github.com/ARM-software/abi-aa/releases/download/2021Q3/aapcs64.pdf
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425114444.368693-4-alexandru.elisei@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The arm64 Scalable Matrix Extension (SME) adds some new system registers,
fields in existing system registers and exception syndromes. This patch
adds definitions for these for use in future patches implementing support
for this extension.
Since SME will be the first user of FEAT_HCX in the kernel also include
the definitions for enumerating it and the HCRX system register it adds.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-6-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
|
|
Drop several includes of <linux/personality.h> which are not used.
git-blame indicates they were used at some point, but they're not needed
anymore.
Signed-off-by: Sagar Patel <sagarmp@cs.unc.edu>
Link: https://lore.kernel.org/r/20220307222412.146506-1-sagarmp@cs.unc.edu
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There are no remaining callers of set_fs(), so CONFIG_SET_FS
can be removed globally, along with the thread_info field and
any references to it.
This turns access_ok() into a cheaper check against TASK_SIZE_MAX.
As CONFIG_SET_FS is now gone, drop all remaining references to
set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel().
Acked-by: Sam Ravnborg <sam@ravnborg.org> # for sparc32 changes
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Tested-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> # for arc changes
Acked-by: Stafford Horne <shorne@gmail.com> # [openrisc, asm-generic]
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
|
|
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Commit 91fc957c9b1d ("arm64/bpf: don't allocate BPF JIT programs in module
memory") restricts BPF JIT program allocation to a 128MB region to ensure
BPF programs are still in branching range of each other. However this
restriction should not apply to the aarch64 JIT, since BPF_JMP | BPF_CALL
are implemented as a 64-bit move into a register and then a BLR instruction -
which has the effect of being able to call anything without proximity
limitation.
The practical reason to relax this restriction on JIT memory is that 128MB of
JIT memory can be quickly exhausted, especially where PAGE_SIZE is 64KB - one
page is needed per program. In cases where seccomp filters are applied to
multiple VMs on VM launch - such filters are classic BPF but converted to
BPF - this can severely limit the number of VMs that can be launched. In a
world where we support BPF JIT always on, turning off the JIT isn't always an
option either.
Fixes: 91fc957c9b1d ("arm64/bpf: don't allocate BPF JIT programs in module memory")
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <russell.king@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/1636131046-5982-2-git-send-email-alan.maguire@oracle.com
|
|
* for-next/misc:
arm64: Select POSIX_CPU_TIMERS_TASK_WORK
arm64: Document boot requirements for FEAT_SME_FA64
arm64: ftrace: use function_nocfi for _mcount as well
arm64: asm: setup.h: export common variables
arm64/traps: Avoid unnecessary kernel/user pointer conversion
|
|
* for-next/extable:
arm64: vmlinux.lds.S: remove `.fixup` section
arm64: extable: add load_unaligned_zeropad() handler
arm64: extable: add a dedicated uaccess handler
arm64: extable: add `type` and `data` fields
arm64: extable: use `ex` for `exception_table_entry`
arm64: extable: make fixup_exception() return bool
arm64: extable: consolidate definitions
arm64: gpr-num: support W registers
arm64: factor out GPR numbering helpers
arm64: kvm: use kvm_exception_table_entry
arm64: lib: __arch_copy_to_user(): fold fixups into body
arm64: lib: __arch_copy_from_user(): fold fixups into body
arm64: lib: __arch_clear_user(): fold fixups into body
|
|
For inline assembly, we place exception fixups out-of-line in the
`.fixup` section such that these are out of the way of the fast path.
This has a few drawbacks:
* Since the fixup code is anonymous, backtraces will symbolize fixups as
offsets from the nearest prior symbol, currently
`__entry_tramp_text_end`. This is confusing, and painful to debug
without access to the relevant vmlinux.
* Since the exception handler adjusts the PC to execute the fixup, and
the fixup uses a direct branch back into the function it fixes,
backtraces of fixups miss the original function. This is confusing,
and violates requirements for RELIABLE_STACKTRACE (and therefore
LIVEPATCH).
* Inline assembly and associated fixups are generated from templates,
and we have many copies of logically identical fixups which only
differ in which specific registers are written to and which address is
branched to at the end of the fixup. This is potentially wasteful of
I-cache resources, and makes it hard to add additional logic to fixups
without significant bloat.
This patch address all three concerns for inline uaccess fixups by
adding a dedicated exception handler which updates registers in
exception context and subsequent returns back into the function which
faulted, removing the need for fixups specialized to each faulting
instruction.
Other than backtracing, there should be no functional change as a result
of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20211019160219.5202-12-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since CNTVCTSS obey the same control bits as CNTVCT, add the necessary
decoding to the hook table. Note that there is no known user of
this at the moment.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-17-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Annotating a pointer from kernel to __user and then back again requires
an extra __force annotation to silent sparse warning. In call_undef_hook()
this unnecessary complexity can be avoided by modifying the intermediate
user pointer to unsigned long.
This way there is no inter-changeable use of user and kernel pointers
and the code is consistent.
Note: This patch adds no functional changes to code.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210917055811.22341-1-amit.kachhap@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Refactoring of our instruction decoding routines and addition of some
missing encodings.
* for-next/insn:
arm64: insn: avoid circular include dependency
arm64: insn: move AARCH64_INSN_SIZE into <asm/insn.h>
arm64: insn: decouple patching from insn code
arm64: insn: Add load/store decoding helpers
arm64: insn: Add some opcodes to instruction decoder
arm64: insn: Add barrier encodings
arm64: insn: Add SVE instruction class
arm64: Move instruction encoder/decoder under lib/
arm64: Move aarch32 condition check functions
arm64: Move patching utilities out of instruction encoding/decoding
|
|
For histroical reasons, we define AARCH64_INSN_SIZE in
<asm/alternative-macros.h>, but it would make more sense to do so in
<asm/insn.h>. Let's move it into <asm/insn.h>, and add the necessary
include directives for this.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210609102301.17332-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently, <asm/insn.h> includes <asm/patching.h>. We intend that
<asm/insn.h> will be usable from userspace, so it doesn't make sense to
include headers for kernel-only features such as the patching routines,
and we'd intended to restrict <asm/insn.h> to instruction encoding
details.
Let's decouple the patching code from <asm/insn.h>, and explicitly
include <asm/patching.h> where it is needed. Since <asm/patching.h>
isn't included from assembly, we can drop the __ASSEMBLY__ guards.
At the same time, sort the kprobes includes so that it's easier to see
what is and isn't incldued.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210609102301.17332-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We'd like to keep all the entry sequencing in entry-common.c, as this
will allow us to ensure this is consistent, and free from any unsound
instrumentation.
Currently handle_bad_stack() performs the NMI entry sequence in traps.c.
Let's split the low-level entry sequence from the reporting, moving the
former to entry-common.c and keeping the latter in traps.c. To make it
clear that reporting function never returns, it is renamed to
panic_bad_stack().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210607094624.34689-17-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We have 16 architectural exception vectors, and depending on kernel
configuration we handle 8 or 12 of these with C code, with the remaining
8 or 4 of these handled as special cases in the entry assembly.
It would be nicer if the entry assembly were uniform for all exceptions,
and we deferred any specific handling of the exceptions to C code. This
way the entry assembly can be more easily templated without ifdeffery or
special cases, and it's easier to modify the handling of these cases in
future (e.g. to dump additional registers other context).
This patch reworks the entry code so that we always have a C handler for
every architectural exception vector, with the entry assembly being
completely uniform. We now have to handle exceptions from EL1t and EL1h,
and also have to handle exceptions from AArch32 even when the kernel is
built without CONFIG_COMPAT. To make this clear and to simplify
templating, we rename the top-level exception handlers with a consistent
naming scheme:
asm: <el+sp>_<regsize>_<type>
c: <el+sp>_<regsize>_<type>_handler
.. where:
<el+sp> is `el1t`, `el1h`, or `el0t`
<regsize> is `64` or `32`
<type> is `sync`, `irq`, `fiq`, or `error`
... e.g.
asm: el1h_64_sync
c: el1h_64_sync_handler
... with lower-level handlers simply using "el1" and "compat" as today.
For unexpected exceptions, this information is passed to
__panic_unhandled(), so it can report the specific vector an unexpected
exception was taken from, e.g.
| Unhandled 64-bit el1t sync exception
For vectors we never expect to enter legitimately, the C code is
generated using a macro to avoid code duplication. The exceptions are
handled via __panic_unhandled(), replacing bad_mode() (which is
removed).
The `kernel_ventry` and `entry_handler` assembly macros are updated to
handle the new naming scheme. In theory it should be possible to
generate the entry functions at the same time as the vectors using a
single table, but this will require reworking the linker script to split
the two into separate sections, so for now we have separate tables.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210607094624.34689-15-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In subsequent patches we'll rework the way bad_mode() is called by
exception entry code. In preparation for this, let's move bad_mode()
itself into entry-common.c.
Let's also mark it as noinstr (e.g. to prevent it being kprobed), and
let's also make the `handler` array a local variable, as this is only
use by bad_mode(), and will be removed entirely in a subsequent patch.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210607094624.34689-12-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For various reasons we'd like to convert the bulk of arm64's exception
triage logic to C. As a step towards that, this patch converts the EL1
and EL0 SError triage logic to C.
Separate C functions are added for the native and compat cases so that
in subsequent patches we can handle native/compat differences in C.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210607094624.34689-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Upon taking an exception, the CPU sets all the DAIF bits. We never
clear any of these bits prior to calling bad_mode(), and bad_mode()
itself never clears any of these bits, so there's no need to call
local_daif_mask().
This patch removes the redundant call.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210607094624.34689-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The functions to check condition flags for aarch32 execution is only
used to emulate aarch32 instructions. Move them from the instruction
encoding/decoding code to the trap handling files.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Link: https://lore.kernel.org/r/20210303170536.1838032-3-jthierry@redhat.com
[will: leave aarch32_opcode_cond_checks where it is]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In a few places we don't have whitespace between macro parameters,
which makes them hard to read. This patch adds whitespace to clearly
separate the parameters.
In a few places we have unnecessary whitespace around unary operators,
which is confusing, This patch removes the unnecessary whitespace.
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
Link: https://lore.kernel.org/r/1612403029-5011-1-git-send-email-daizhiyuan@phytium.com.cn
Signed-off-by: Will Deacon <will@kernel.org>
|
|
asm/exception.h is included more than once. Remove the one that isn't
necessary.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1609139108-10819-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
* arm64/for-next/fixes: (26 commits)
arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
arm64: mte: Fix typo in macro definition
arm64: entry: fix EL1 debug transitions
arm64: entry: fix NMI {user, kernel}->kernel transitions
arm64: entry: fix non-NMI kernel<->kernel transitions
arm64: ptrace: prepare for EL1 irq/rcu tracking
arm64: entry: fix non-NMI user<->kernel transitions
arm64: entry: move el1 irq/nmi logic to C
arm64: entry: prepare ret_to_user for function call
arm64: entry: move enter_from_user_mode to entry-common.c
arm64: entry: mark entry code as noinstr
arm64: mark idle code as noinstr
arm64: syscall: exit userspace before unmasking exceptions
arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
arm64: pgtable: Fix pte_accessible()
ACPI/IORT: Fix doc warnings in iort.c
arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build
arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver
arm64: proton-pack: Add KRYO2XX silver CPUs to spectre-v2 safe-list
arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist
...
# Conflicts:
# arch/arm64/include/asm/exception.h
# arch/arm64/kernel/sdei.c
|
|
Exceptions which can be taken at (almost) any time are consdiered to be
NMIs. On arm64 that includes:
* SDEI events
* GICv3 Pseudo-NMIs
* Kernel stack overflows
* Unexpected/unhandled exceptions
... but currently debug exceptions (BRKs, breakpoints, watchpoints,
single-step) are not considered NMIs.
As these can be taken at any time, kernel features (lockdep, RCU,
ftrace) may not be in a consistent kernel state. For example, we may
take an NMI from the idle code or partway through an entry/exit path.
While nmi_enter() and nmi_exit() handle most of this state, notably they
don't save/restore the lockdep state across an NMI being taken and
handled. When interrupts are enabled and an NMI is taken, lockdep may
see interrupts become disabled within the NMI code, but not see
interrupts become enabled when returning from the NMI, leaving lockdep
believing interrupts are disabled when they are actually disabled.
The x86 code handles this in idtentry_{enter,exit}_nmi(), which will
shortly be moved to the generic entry code. As we can't use either yet,
we copy the x86 approach in arm64-specific helpers. All the NMI
entrypoints are marked as noinstr to prevent any instrumentation
handling code being invoked before the state has been corrected.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-11-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In later patches we'll want to extend enter_from_user_mode() and add a
corresponding exit_to_user_mode(). As these will be common for all
entries/exits from userspace, it'd be better for these to live in
entry-common.c with the rest of the entry logic.
This patch moves enter_from_user_mode() into entry-common.c. As with
other functions in entry-common.c it is marked as noinstr (which
prevents all instrumentation, tracing, and kprobes) but there are no
other functional changes.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The kernel currently clears the tag bits (i.e. bits 56-63) in the fault
address exposed via siginfo.si_addr and sigcontext.fault_address. However,
the tag bits may be needed by tools in order to accurately diagnose
memory errors, such as HWASan [1] or future tools based on the Memory
Tagging Extension (MTE).
Expose these bits via the arch_untagged_si_addr mechanism, so that
they are only exposed to signal handlers with the SA_EXPOSE_TAGBITS
flag set.
[1] http://clang.llvm.org/docs/HardwareAssistedAddressSanitizerDesign.html
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://linux-review.googlesource.com/id/Ia8876bad8c798e0a32df7c2ce1256c4771c81446
Link: https://lore.kernel.org/r/0010296597784267472fa13b39f8238d87a72cf8.1605904350.git.pcc@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
'for-next/cpuinfo', 'for-next/fpsimd', 'for-next/misc', 'for-next/mm', 'for-next/pci', 'for-next/perf', 'for-next/ptrauth', 'for-next/sdei', 'for-next/selftests', 'for-next/stacktrace', 'for-next/svm', 'for-next/topology', 'for-next/tpyos' and 'for-next/vdso' into for-next/core
Remove unused functions and parameters from ACPI IORT code.
(Zenghui Yu via Lorenzo Pieralisi)
* for-next/acpi:
ACPI/IORT: Remove the unused inline functions
ACPI/IORT: Drop the unused @ops of iort_add_device_replay()
Remove redundant code and fix documentation of caching behaviour for the
HVC_SOFT_RESTART hypercall.
(Pingfan Liu)
* for-next/boot:
Documentation/kvm/arm: improve description of HVC_SOFT_RESTART
arm64/relocate_kernel: remove redundant code
Improve reporting of unexpected kernel traps due to BPF JIT failure.
(Will Deacon)
* for-next/bpf:
arm64: Improve diagnostics when trapping BRK with FAULT_BRK_IMM
Improve robustness of user-visible HWCAP strings and their corresponding
numerical constants.
(Anshuman Khandual)
* for-next/cpuinfo:
arm64/cpuinfo: Define HWCAP name arrays per their actual bit definitions
Cleanups to handling of SVE and FPSIMD register state in preparation
for potential future optimisation of handling across syscalls.
(Julien Grall)
* for-next/fpsimd:
arm64/sve: Implement a helper to load SVE registers from FPSIMD state
arm64/sve: Implement a helper to flush SVE registers
arm64/fpsimdmacros: Allow the macro "for" to be used in more cases
arm64/fpsimdmacros: Introduce a macro to update ZCR_EL1.LEN
arm64/signal: Update the comment in preserve_sve_context
arm64/fpsimd: Update documentation of do_sve_acc
Miscellaneous changes.
(Tian Tao and others)
* for-next/misc:
arm64/mm: return cpu_all_mask when node is NUMA_NO_NODE
arm64: mm: Fix missing-prototypes in pageattr.c
arm64/fpsimd: Fix missing-prototypes in fpsimd.c
arm64: hibernate: Remove unused including <linux/version.h>
arm64/mm: Refactor {pgd, pud, pmd, pte}_ERROR()
arm64: Remove the unused include statements
arm64: get rid of TEXT_OFFSET
arm64: traps: Add str of description to panic() in die()
Memory management updates and cleanups.
(Anshuman Khandual and others)
* for-next/mm:
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64/mm: Unify CONT_PMD_SHIFT
arm64/mm: Unify CONT_PTE_SHIFT
arm64/mm: Remove CONT_RANGE_OFFSET
arm64/mm: Enable THP migration
arm64/mm: Change THP helpers to comply with generic MM semantics
arm64/mm/ptdump: Add address markers for BPF regions
Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
(Clint Sbisa)
* for-next/pci:
arm64: Enable PCI write-combine resources under sysfs
Perf/PMU driver updates.
(Julien Thierry and others)
* for-next/perf:
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm_pmu: arm64: Use NMIs for PMU
arm_pmu: Introduce pmu_irq_ops
KVM: arm64: pmu: Make overflow handler NMI safe
arm64: perf: Defer irq_work to IPI_IRQ_WORK
arm64: perf: Remove PMU locking
arm64: perf: Avoid PMXEV* indirection
arm64: perf: Add missing ISB in armv8pmu_enable_counter()
perf: Add Arm CMN-600 PMU driver
perf: Add Arm CMN-600 DT binding
arm64: perf: Add support caps under sysfs
drivers/perf: thunderx2_pmu: Fix memory resource error handling
drivers/perf: xgene_pmu: Fix uninitialized resource struct
perf: arm_dsu: Support DSU ACPI devices
arm64: perf: Remove unnecessary event_idx check
drivers/perf: hisi: Add missing include of linux/module.h
arm64: perf: Add general hardware LLC events for PMUv3
Support for the Armv8.3 Pointer Authentication enhancements.
(By Amit Daniel Kachhap)
* for-next/ptrauth:
arm64: kprobe: clarify the comment of steppable hint instructions
arm64: kprobe: disable probe of fault prone ptrauth instruction
arm64: cpufeature: Modify address authentication cpufeature to exact
arm64: ptrauth: Introduce Armv8.3 pointer authentication enhancements
arm64: traps: Allow force_signal_inject to pass esr error code
arm64: kprobe: add checks for ARMv8.3-PAuth combined instructions
Tonnes of cleanup to the SDEI driver.
(Gavin Shan)
* for-next/sdei:
firmware: arm_sdei: Remove _sdei_event_unregister()
firmware: arm_sdei: Remove _sdei_event_register()
firmware: arm_sdei: Introduce sdei_do_local_call()
firmware: arm_sdei: Cleanup on cross call function
firmware: arm_sdei: Remove while loop in sdei_event_unregister()
firmware: arm_sdei: Remove while loop in sdei_event_register()
firmware: arm_sdei: Remove redundant error message in sdei_probe()
firmware: arm_sdei: Remove duplicate check in sdei_get_conduit()
firmware: arm_sdei: Unregister driver on error in sdei_init()
firmware: arm_sdei: Avoid nested statements in sdei_init()
firmware: arm_sdei: Retrieve event number from event instance
firmware: arm_sdei: Common block for failing path in sdei_event_create()
firmware: arm_sdei: Remove sdei_is_err()
Selftests for Pointer Authentication and FPSIMD/SVE context-switching.
(Mark Brown and Boyan Karatotev)
* for-next/selftests:
selftests: arm64: Add build and documentation for FP tests
selftests: arm64: Add wrapper scripts for stress tests
selftests: arm64: Add utility to set SVE vector lengths
selftests: arm64: Add stress tests for FPSMID and SVE context switching
selftests: arm64: Add test for the SVE ptrace interface
selftests: arm64: Test case for enumeration of SVE vector lengths
kselftests/arm64: add PAuth tests for single threaded consistency and differently initialized keys
kselftests/arm64: add PAuth test for whether exec() changes keys
kselftests/arm64: add nop checks for PAuth tests
kselftests/arm64: add a basic Pointer Authentication test
Implementation of ARCH_STACKWALK for unwinding.
(Mark Brown)
* for-next/stacktrace:
arm64: Move console stack display code to stacktrace.c
arm64: stacktrace: Convert to ARCH_STACKWALK
arm64: stacktrace: Make stack walk callback consistent with generic code
stacktrace: Remove reliable argument from arch_stack_walk() callback
Support for ASID pinning, which is required when sharing page-tables with
the SMMU.
(Jean-Philippe Brucker)
* for-next/svm:
arm64: cpufeature: Export symbol read_sanitised_ftr_reg()
arm64: mm: Pin down ASIDs for sharing mm with devices
Rely on firmware tables for establishing CPU topology.
(Valentin Schneider)
* for-next/topology:
arm64: topology: Stop using MPIDR for topology information
Spelling fixes.
(Xiaoming Ni and Yanfei Xu)
* for-next/tpyos:
arm64/numa: Fix a typo in comment of arm64_numa_init
arm64: fix some spelling mistakes in the comments by codespell
vDSO cleanups.
(Will Deacon)
* for-next/vdso:
arm64: vdso: Fix unusual formatting in *setup_additional_pages()
arm64: vdso32: Remove a bunch of #ifdef CONFIG_COMPAT_VDSO guards
|
|
Currently the code for displaying a stack trace on the console is located
in traps.c rather than stacktrace.c, using the unwinding code that is in
stacktrace.c. This can be confusing and make the code hard to find since
such output is often referred to as a stack trace which might mislead the
unwary. Due to this and since traps.c doesn't interact with this code
except for via the public interfaces move the code to stacktrace.c to
make it easier to find.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200921122341.11280-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When generating instructions at runtime, for example due to kernel text
patching or the BPF JIT, we can emit a trapping BRK instruction if we
are asked to encode an invalid instruction such as an out-of-range]
branch. This is indicative of a bug in the caller, and will result in a
crash on executing the generated code. Unfortunately, the message from
the crash is really unhelpful, and mumbles something about ptrace:
| Unexpected kernel BRK exception at EL1
| Internal error: ptrace BRK handler: f2000100 [#1] SMP
We can do better than this. Install a break handler for FAULT_BRK_IMM,
which is the immediate used to encode the "I've been asked to generate
an invalid instruction" error, and triage the faulting PC to determine
whether or not the failure occurred in the BPF JIT.
Link: https://lore.kernel.org/r/20200915141707.GB26439@willie-the-truck
Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The function __{pgd, pud, pmd, pte}_error() are introduced so that
they can be called by {pgd, pud, pmd, pte}_ERROR(). However, some
of the functions could never be called when the corresponding page
table level isn't enabled. For example, __{pud, pmd}_error() are
unused when PUD and PMD are folded to PGD.
This removes __{pgd, pud, pmd, pte}_error() and call pr_err() from
{pgd, pud, pmd, pte}_ERROR() directly, similar to what x86/powerpc
are doing. With this, the code looks a bit simplified either.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20200913234730.23145-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Some Armv8.3 Pointer Authentication enhancements have been introduced
which are mandatory for Armv8.6 and optional for Armv8.3. These features
are,
* ARMv8.3-PAuth2 - An enhanced PAC generation logic is added which hardens
finding the correct PAC value of the authenticated pointer.
* ARMv8.3-FPAC - Fault is generated now when the ptrauth authentication
instruction fails in authenticating the PAC present in the address.
This is different from earlier case when such failures just adds an
error code in the top byte and waits for subsequent load/store to abort.
The ptrauth instructions which may cause this fault are autiasp, retaa
etc.
The above features are now represented by additional configurations
for the Address Authentication cpufeature and a new ESR exception class.
The userspace fault received in the kernel due to ARMv8.3-FPAC is treated
as Illegal instruction and hence signal SIGILL is injected with ILL_ILLOPN
as the signal code. Note that this is different from earlier ARMv8.3
ptrauth where signal SIGSEGV is issued due to Pointer authentication
failures. The in-kernel PAC fault causes kernel to crash.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20200914083656.21428-4-amit.kachhap@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Some error signal need to pass proper ARM esr error code to userspace to
better identify the cause of the signal. So the function
force_signal_inject is extended to pass this as a parameter. The
existing code is not affected by this change.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20200914083656.21428-3-amit.kachhap@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently, there are different description strings in die() such as
die("Oops",,), die("Oops - BUG",,). And panic() called by die() will
always show "Fatal exception" or "Fatal exception in interrupt".
Note that panic() will run any panic handler via panic_notifier_list.
And the string above will be formatted and placed in static buf[]
which will be passed to handler.
So panic handler can not distinguish which Oops it is from the buf if
we want to do some things like reserve the string in memory or panic
statistics. It's not benefit to debug. We need to add more codes to
troubleshoot. Let's utilize existing resource to make debug much simpler.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Link: https://lore.kernel.org/r/20200804085347.10720-1-zbestahu@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
