| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
One last Qualcomm ARM64 DeviceTree fix for v6.4
Changes related to cache management for DMA memory caused WiFi to stop
work on SC7180 and SC7280 based products, using TF-A. These changes
marks the relevant device dma-coherent to correct the behavior.
* tag 'qcom-arm64-fixes-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices
arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor
arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP
dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
Link: https://lore.kernel.org/r/20230622203248.106422-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Just like for sc7180 devices using the Chrome bootflow (AKA trogdor
and IDP), sc7280 devices using the Chrome bootflow also need their
firmware marked dma-coherent. On sc7280 this wasn't causing WiFi to
fail to startup, since WiFi works differently there. However, on
sc7280 devices we were still getting the message at bootup after
commit 7bd6680b47fa ("Revert "Revert "arm64: dma: Drop cache
invalidation from arch_dma_prep_coherent()"""):
qcom_scm firmware:scm: Assign memory protection call failed -22
qcom_rmtfs_mem 9c900000.memory: assign memory failed
qcom_rmtfs_mem: probe of 9c900000.memory failed with error -22
We should mark SCM properly just like we did for trogdor.
Fixes: 7bd6680b47fa ("Revert "Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()""")
Fixes: 7a1f4e7f740d ("arm64: dts: qcom: sc7280: Add basic dts/dtsi files for sc7280 soc")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230616081440.v2.4.I21dc14a63327bf81c6bb58fe8ed91dbdc9849ee2@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Trogdor devices use firmware backed by TF-A instead of Qualcomm's
normal TZ. On TF-A we end up mapping memory as cacheable.
Specifically, you can see in Trogdor's TF-A code [1] in
qti_sip_mem_assign() that we call qti_mmap_add_dynamic_region() with
MT_RO_DATA. This translates down to MT_MEMORY instead of
MT_NON_CACHEABLE or MT_DEVICE. Apparently Qualcomm's normal TZ
implementation maps the memory as non-cacheable.
Let's add the "dma-coherent" attribute to the SCM for trogdor.
Adding "dma-coherent" like this fixes WiFi on sc7180-trogdor
devices. WiFi was broken as of commit 7bd6680b47fa ("Revert "Revert
"arm64: dma: Drop cache invalidation from
arch_dma_prep_coherent()"""). Specifically at bootup we'd get:
qcom_scm firmware:scm: Assign memory protection call failed -22
qcom_rmtfs_mem 94600000.memory: assign memory failed
qcom_rmtfs_mem: probe of 94600000.memory failed with error -22
From discussion on the mailing lists [2] and over IRC [3], it was
determined that we should always have been tagging the SCM as
dma-coherent on trogdor but that the old "invalidate" happened to make
things work most of the time. Tagging it properly like this is a much
more robust solution.
[1] https://chromium.googlesource.com/chromiumos/third_party/arm-trusted-firmware/+/refs/heads/firmware-trogdor-13577.B/plat/qti/common/src/qti_syscall.c
[2] https://lore.kernel.org/r/20230614165904.1.I279773c37e2c1ed8fbb622ca6d1397aea0023526@changeid
[3] https://oftc.irclog.whitequark.org/linux-msm/2023-06-15
Fixes: 7bd6680b47fa ("Revert "Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()""")
Fixes: 7ec3e67307f8 ("arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230616081440.v2.3.Ic62daa649b47b656b313551d646c4de9a7da4bd4@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
sc7180-idp is, for most intents and purposes, a trogdor device.
Specifically, sc7180-idp is designed to run the same style of firmware
as trogdor devices. This can be seen from the fact that IDP has the
same "Reserved memory changes" in its device tree that trogdor has.
Recently it was realized that we need to mark SCM as dma-coherent to
match what trogdor's style of firmware (based on TF-A) does [1]. That
means we need this dma-coherent tag on IDP as well.
Without this, on newer versions of Linux, specifically those with
commit 7bd6680b47fa ("Revert "Revert "arm64: dma: Drop cache
invalidation from arch_dma_prep_coherent()"""), WiFi will fail to
work. At bootup you'll see:
qcom_scm firmware:scm: Assign memory protection call failed -22
qcom_rmtfs_mem 94600000.memory: assign memory failed
qcom_rmtfs_mem: probe of 94600000.memory failed with error -22
[1] https://lore.kernel.org/r/20230615145253.1.Ic62daa649b47b656b313551d646c4de9a7da4bd4@changeid
Fixes: 7bd6680b47fa ("Revert "Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()""")
Fixes: f5ab220d162c ("arm64: dts: qcom: sc7180: Add remoteproc enablers")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230616081440.v2.2.I3c17d546d553378aa8a0c68c3fe04bccea7cba17@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fixes for the reset pin on nanopi r5c, a reset line on SOQuartz, a duplicate
usb regulator on rock64 and PCIe register mappings on rk356x.
Also some missing cache properties.
* tag 'v6.4-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix rk356x PCIe register and range mappings
arm64: dts: rockchip: fix button reset pin for nanopi r5c
arm64: dts: rockchip: fix nEXTRST on SOQuartz
arm64: dts: rockchip: add missing cache properties
arm64: dts: rockchip: fix USB regulator on ROCK64
Link: https://lore.kernel.org/r/2885657.e9J7NaK4W3@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.4, round 2:
- Fix SPI CS pinmux for the final production version of imx8mn-beacon
board.
- Fix GPIOs for USDHC2 CD and WP signals on imx8qm-mek board.
- Assign default clock rate for i.MX8 LPUARTs to fix UART failure.
* tag 'imx-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
Link: https://lore.kernel.org/r/20230607141312.GU4199@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The register and range mappings for the PCIe controller in Rockchip's
RK356x SoCs are incorrect. Replace them with corrected values from the
vendor BSP sources, updated to match current DT schema.
These values are also used in u-boot.
Fixes: 66b51ea7d70f ("arm64: dts: rockchip: Add rk3568 PCIe2x1 controller")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20230601132516.153934-1-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DeviceTree fixes for 6.4
Register scheme for SM8550 LLCC is corrected to avoid using the wrong
register offsets. SDRAM frequency for misidentified SC7180-lite boards
is handled. The datatype for Soundwire interval on SM8550 is corrected.
The resource controller on SC8280XP is added to the CPU cluster
power-domain to get notified to send cached sleep and wake votes before
going entering the lower power states.
SA8155P power-domains that differ from what's inherited from the SM8150
DeviceTree are adjusted to make the platform boot again.
Remoteproc firmware paths are corrected for Sony Xperia 10 IV.
Cache properties are adjusted across a range of platforms, to meet
changes in the binding.
Panel compatibles are corrected for Xiaomi Mi Pad 5 Pro, to match
binding. Invalid dai-cells are dropped from SC7280 devices, to match
binding.
The incorrect removal of "input-enable" from the LPASS pinctrl node of
SC8280XP was reverted, to get dmic pins in the correct state again.
The incorrect input-enable property is dropped from a msm8974, mdm9615
and apq8026 to resolve a range of DT validation warnings, incorrectly
picked up through the ARM64 tree.
* tag 'qcom-arm64-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
arm64: dts: qcom: add missing cache properties
arm64: dts: qcom: use decimal for cache level
arm64: dts: qcom: fix indentation
ARM: dts: qcom: msm8974: remove superfluous "input-enable"
ARM: dts: qcom: mdm9615: remove superfluous "input-enable"
ARM: dts: qcom: apq8026: remove superfluous "input-enable"
arm64: dts: qcom: sm8250-xiaomi-elish-csot: fix panel compatible
arm64: dts: qcom: sm8250-xiaomi-elish-boe: fix panel compatible
arm64: dts: qcom: sc7280-qcard: drop incorrect dai-cells from WCD938x SDW
arm64: dts: qcom: sc7280-idp: drop incorrect dai-cells from WCD938x SDW
arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes
arm64: dts: qcom: sc8280xp: Revert "arm64: dts: qcom: sc8280xp: remove superfluous "input-enable""
Link: https://lore.kernel.org/r/20230601142659.2246348-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The final production baseboard had a different chip select than
earlier prototype boards. When the newer board was released,
the SPI stopped working because the wrong pin was used in the device
tree and conflicted with the UART RTS. Fix the pinmux for
production boards.
Fixes: 36ca3c8ccb53 ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the assigned-clocks and assigned-clock-rates properties for the
LPUARTx nodes. Without these properties, the default clock rate
used would be 0, which can cause the UART ports to fail when open.
Fixes: 35f4e9d7530f ("arm64: dts: imx8: split adma ss into dma and audio ss")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The USDHC2 CD and WP sginal should be on LSIO_GPIO5.
Fixes: 307fd14d4b14 ("arm64: dts: imx: add imx8qm mek support")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.4:
- A couple of i.MX8MN/P video clock changes from Adam Ford to fix issue
with clock re-parenting.
- Add missing pvcie-supply regulator for imx6qdl-mba6 board.
- A series of colibri-imx8x board fixes on pin configuration.
- Set and limit the mode for PMIC bucks for imx6ull-dhcor board to fix
stability problems.
- A couple of changes from Frank Li to correct cdns,usb3 bindings
cdns,on-chip-buff-size property and fix USB 3.0 gadget failure on
i.MX8QM & QXPB0.
- Add a required PHY deassert delay for imx8mn-var-som board to fix PHY
detection failure.
* tag 'imx-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8: fix USB 3.0 Gadget Failure in QM & QXPB0 at super speed
dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type
arm64: dts: colibri-imx8x: delete adc1 and dsp
arm64: dts: colibri-imx8x: fix iris pinctrl configuration
arm64: dts: colibri-imx8x: move pinctrl property from SoM to eval board
arm64: dts: colibri-imx8x: fix eval board pin configuration
arm64: dts: imx8mp: Fix video clock parents
ARM: dts: imx6qdl-mba6: Add missing pvcie-supply regulator
ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3
arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay
arm64: dts: imx8mn: Fix video clock parents
Link: https://lore.kernel.org/r/20230516133625.GI767028@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
During the ABI-breaking (for good reasons) conversion of the LLCC
register description, SM8550 was not taken into account, resulting
in LLCC being broken on any kernel containing the patch referenced
in the fixes tag.
Fix it by describing the regions properly.
Fixes: ee13b5008707 ("qcom: llcc/edac: Fix the base address used for accessing LLCC banks")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517-topic-kailua-llcc-v1-2-d57bd860c43e@linaro.org
|
|
boards
In general, the three SKUs of sc7180 (lite, normal, and pro) are
handled dynamically.
The cpufreq table in sc7180.dtsi includes the superset of all CPU
frequencies. The "qcom-cpufreq-hw" driver in Linux shows that we can
dynamically detect which frequencies are actually available on the
currently running CPU and then we can just enable those ones.
The GPU is similarly dynamic. The nvmem has a fuse in it (see
"gpu_speed_bin" in sc7180.dtsi) that the GPU driver can use to figure
out which frequencies to enable.
There is one part, however, that is not so dynamic. The way SDRAM
frequency works in sc7180 is that it's tied to cpufreq. At the busiest
cpufreq operating points we'll pick the top supported SDRAM frequency.
They ramp down together.
For the "pro" SKU of sc7180, we only enable one extra cpufreq step.
That extra cpufreq step runs SDRAM at the same speed as the step
below. Thus, for normal and pro things are OK. There is no sc7180-pro
device tree snippet.
For the "lite" SKU if sc7180, however, things aren't so easy. The
"lite" SKU drops 3 cpufreq entries but can still run SDRAM at max
frequency. That messed things up with the whole scheme. This is why we
added the "sc7180-lite" fragment in commit 8fd01e01fd6f ("arm64: dts:
qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite").
When the lite scheme came about, it was agreed that the WiFi SKUs of
lazor would _always_ be "lite" and would, in fact, be the only "lite"
devices. Unfortunately, this decision changed and folks didn't realize
that it would be a problem. Specifically, some later lazor WiFi-only
devices were built with "pro" CPUs.
Building WiFi-only lazor with "pro" CPUs isn't the end of the world.
The SDRAM will ramp up a little sooner than it otherwise would, but
aside from a small power hit things work OK. One problem, though, is
that the SDRAM scaling becomes a bit quirky. Specifically, with the
current tables we'll max out SDRAM frequency at 2.1GHz but then
_lower_ it at 2.2GHz / 2.3GHz only to raise it back to max for 2.4GHz
and 2.55GHz.
Let's at least fix this so that the SDRAM frequency doesn't go down in
that quirky way. On true "lite" SKUs this change will be a no-op
because the operating points we're touching are disabled. This change
is only useful when a board that thinks it has a "lite" CPU actually
has a "normal" or "pro" one stuffed.
Fixes: 8fd01e01fd6f ("arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515171929.1.Ic8dee2cb79ce39ffc04eab2a344dde47b2f9459f@changeid
|
|
The Soundwire bindings changed during review, after the SM8550 DTS
Soundwire nodes were merged. Switch to uint16 for Soundwire
qcom,ports-sinterval property, to match with current bindings.
Fixes: 61b006389bb7 ("arm64: dts: qcom: sm8550: add Soundwire controllers")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230418095734.669858-1-krzysztof.kozlowski@linaro.org
|
|
The RPMhPD setup on SA8155P is different compared to SM8150. Correct
it to ensure the platform will not try accessing forbidden/missing
RPMh entries at boot, as a bad vote will hang the machine.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230411-topic-hanaau-v2-3-fd3d70844b31@linaro.org
|
|
They were previously missing the SoC name. Fix it.
Fixes: a2ad207c412b ("arm64: dts: qcom: sm6375-pdx225: Enable ADSP & CDSP")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517-topic-murray-fwname-v1-1-923e87312249@linaro.org
|
|
Add required cache-level and cache-unified properties to fix warnings
like:
qdu1000-idp.dtb: l3-cache: 'cache-unified' is a required property
qdu1000-idp.dtb: l2-cache: 'cache-level' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416101134.95686-3-krzysztof.kozlowski@linaro.org
|
|
Cache level is by convention a decimal number, not hex.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416101134.95686-2-krzysztof.kozlowski@linaro.org
|
|
Correct indentation to use only tabs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416101134.95686-1-krzysztof.kozlowski@linaro.org
|
|
The bindings expect "novatek,nt36523" fallback in the panel compatible:
sm8250-xiaomi-elish-csot.dtb: panel@0: compatible: ['xiaomi,elish-csot-nt36523'] is too short
Fixes: 8a786036c7b6 ("arm64: dts: qcom: sm8250-xiaomi-elish-csot: Add Xiaomi Mi Pad 5 Pro CSOT variant")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230408130809.52319-2-krzysztof.kozlowski@linaro.org
|
|
The bindings expect "novatek,nt36523" fallback in the panel compatible:
sm8250-xiaomi-elish-boe.dtb: panel@0: compatible: ['xiaomi,elish-boe-nt36523'] is too shor
Fixes: 51c4c2bd6f31 ("arm64: dts: qcom: sm8250-xiaomi-elish-boe: Add mdss and dsi panel")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230408130809.52319-1-krzysztof.kozlowski@linaro.org
|
|
The WCD938x audio codec Soundwire interface part is not a DAI and does
not allow sound-dai-cells:
sc7280-herobrine-crd.dtb: codec@0,4: '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230220095401.64196-2-krzysztof.kozlowski@linaro.org
|
|
The WCD938x audio codec Soundwire interface part is not a DAI and does
not allow sound-dai-cells:
sc7280-idp.dtb: codec@0,4: '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230220095401.64196-1-krzysztof.kozlowski@linaro.org
|
|
Resolve USB 3.0 gadget failure for QM and QXPB0 in super speed mode with
single IN and OUT endpoints, like mass storage devices, due to incorrect
ACTUAL_MEM_SIZE in ep_cap2 (32k instead of actual 18k). Implement dt
property cdns,on-chip-buff-size to override ep_cap2 and set it to 18k for
imx8QM and imx8QXP chips. No adverse effects for 8QXP C0.
Cc: stable@vger.kernel.org
Fixes: dce49449e04f ("usb: cdns3: allocate TX FIFO size according to composite EP number")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX8, i.MX8X, i.MX8XP and i.MX8XL SOC device trees are all based on
imx8-ss-*.dtsi files. For i.MX8X and i.MX8XP these device trees
should be updated with some peripherals removed or updated, similar
to i.MX8XL (imx8dxl-ss-*.dtsi files). However, it looks like only
i.MX8 and i.MX8XL are up to date, but for i.MX8X and i.MX8XP some
of the peripherals got inherited from imx8-ss-*.dtsi files, but in
reality they are not present on SOC.
As a result, during resource partition ownership check U-Boot receives
messages from SCU firmware about these resources not owned by boot
partition. In reality, these resources are not owned by anyone, as
they simply does not exist, but are defined in Linux device tree.
This change removes those peripherals, which are listed during
U-Boot resource partition ownership check as warnings:
## Flattened Device Tree blob at 9d400000
Booting using the fdt blob at 0x9d400000
Loading Device Tree to 00000000fd652000, end 00000000fd67efff ... OK
Disable clock-controller@59580000 rsrc 512 not owned
Disable clock-controller@5ac90000 rsrc 102 not owned
Starting kernel ...
Fixes: ba5a5615d54f ("arm64: dts: freescale: add initial support for colibri imx8x")
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove GPIO3_IO10 from Iris carrier board pinctrl configuration,
this is already defined in the SOM dtsi since this is a
standard SOM functionality (wake-up button).
Duplicating it leads to the following error message
imx8qxp-pinctrl scu:pinctrl: pin IMX8QXP_QSPI0A_DATA1 already requested
Fixes: aefb5e2d974d ("arm64: dts: colibri-imx8x: Add iris carrier board")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Each carrier board device tree except the eval board one already override
iomuxc pinctrl property to configure unused pins as gpio.
So move also the pinctrl property to eval board device tree.
Leave the pin group definition in imx8x-colibri.dtsi to avoid duplication
and simplify configuration of gpio.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix pinctrl groups to have SODIMM 75 only in one group.
Remove configuration of the pin at SoM level because it is normally
used as CSI_MCLK at camera interface connector.
Without this fix it is not possible, without redefining iomuxc pinctrl,
to use CSI_MCLK signal and leads to the following error messages:
imx8qxp-pinctrl scu:pinctrl: pin IMX8QXP_CSI_MCLK already requested
imx8qxp-pinctrl scu:pinctrl: pin-147 (16-003c) status -22
Fixes: 4d2adf738169 ("arm64: dts: colibri-imx8x: Split pinctrl_hog1")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There are a few clocks whose parents are set in mipi_dsi
and lcdif nodes, but these clocks are used by the media_blk_ctrl
power domain. This may cause an issue when re-parenting, because
the media_blk_ctrl may start the clocks before the reparent is
done resulting in a disp_pixel clock having the wrong parent and
rate.
Fix this by moving the assigned-clock-parents and rates to the
media_blk_ctrl node to configure these clocks before they are enabled.
After this patch, both disp1_pix_root and dixp2_pix_root clock
become children of the video_pll1.
video_pll1_ref_sel 24000000
video_pll1 1039500000
video_pll1_bypass 1039500000
video_pll1_out 1039500000
media_disp2_pix 1039500000
media_disp2_pix_root_clk 1039500000
media_disp1_pix 1039500000
media_disp1_pix_root_clk 1039500000
Fixes: eda09fe149df ("arm64: dts: imx8mp: Add display pipeline components")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.
Without this, only AMC votes are being commited.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230512150425.3171122-1-quic_bjorande@quicinc.com
|
|
superfluous "input-enable""
This reverts commit 87e1f7b1a041a37390bf4fa7913683fb4f8d00d8 because it
removed input-enable from the LPASS TLMM, where it is still correct
(both bindings and Linux driver parse it).
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/lkml/ZDVq1b0TjXH5LTYx@hovoldconsulting.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230411170938.1657387-1-krzysztof.kozlowski@linaro.org
|
|
While testing the ethernet interface on a Variscite symphony carrier
board using an imx8mn SOM with an onboard ADIN1300 PHY (EC hardware
configuration), the ethernet PHY is not detected.
The ADIN1300 datasheet indicate that the "Management interface
active (t4)" state is reached at most 5ms after the reset signal is
deasserted.
The device tree in Variscite custom git repository uses the following
property:
phy-reset-post-delay = <20>;
Add a new MDIO property 'reset-deassert-us' of 20ms to have the same
delay inside the ethphy node. Adding this property fixes the problem
with the PHY detection.
Note that this SOM can also have an Atheros AR8033 PHY. In this case,
a 1ms deassert delay is sufficient. Add a comment to that effect.
Fixes: ade0176dd8a0 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module")
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There are a few clocks whose parents are set in mipi_dsi
and mxsfb nodes, but these clocks are used by the disp_blk_ctrl
power domain which may cause an issue when re-parenting, resuling
in a disp_pixel clock having the wrong parent and wrong rate.
Fix this by moving the assigned-clock-parents as associate clock
assignments to the power-domain node to setup these clocks before
they are enabled.
Fixes: d825fb6455d5 ("arm64: dts: imx8mn: Add display pipeline components")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The reset pin was wrongly assigned due to a copy/paste error,
fix it to match actual gpio pin.
While at it, remove a blank line from nanopi r5s dts.
Fixes: 05620031408a ("arm64: dts: rockchip: Add FriendlyARM NanoPi R5C")
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20230510161850.4866-1-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
As all level 2 and level 3 caches are unified, add required
cache-unified properties to fix warnings like:
foundation-v8.dtb: l2-cache0: 'cache-unified' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230421223213.115639-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
In pre-production prototypes (of which I only know one person
having one, Peter Geis), GPIO0 pin A5 was tied to the SDMMC
power enable pin on the CM4 connector. On all production models,
this is not the case; instead, this pin is used for the nEXTRST
signal, and the SDMMC power enable pin is always pulled high.
Since everyone currently using the SOQuartz device trees will
want this change, it is made to the tree without splitting the
trees into two separate ones of which users will then inevitably
choose the wrong one.
This fixes USB and PCIe on a wide variety of CM4IO-compatible
boards which use the nEXTRST signal.
Fixes: 5859b5a9c3ac ("arm64: dts: rockchip: add SoQuartz CM4IO dts")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20230421152610.21688-1-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
As all level 2 and level 3 caches are unified, add required
cache-unified properties to fix warnings like:
rk3588s-khadas-edge2.dtb: l3-cache: 'cache-unified' is a dependency of 'cache-size'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230421223149.115185-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Currently the ROCK64 device tree specifies two regulators, vcc_host_5v
and vcc_host1_5v for USB VBUS on the device. Both of those are however
specified with RK_PA2 as the GPIO enabling them, causing the following
error when booting:
rockchip-pinctrl pinctrl: pin gpio0-2 already requested by vcc-host-5v-regulator; cannot claim for vcc-host1-5v-regulator
rockchip-pinctrl pinctrl: pin-2 (vcc-host1-5v-regulator) status -22
rockchip-pinctrl pinctrl: could not request pin 2 (gpio0-2) from group usb20-host-drv on device rockchip-pinctrl
reg-fixed-voltage vcc-host1-5v-regulator: Error applying setting, reverse things back
Looking at the schematic, there are in fact three USB regulators,
vcc_host_5v, vcc_host1_5v and vcc_otg_v5. But the enable signal for all
three is driven by Q2604 which is in turn driven by GPIO_A2/PA2.
Since these three regulators are not controllable separately, I removed
the second one which was causing the error and added labels for all
rails to the single regulator.
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20230421213841.3079632-1-lorenz@brun.one
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux
Pull hardware timestamp engine updates from Dipen Patel:
"The changes for the hte subsystem include:
- Add Tegra234 HTE provider and relevant DT bindings
- Update MAINTAINERS file for the HTE subsystem"
* tag 'for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux:
hte: tegra-194: Use proper includes
hte: Use device_match_of_node()
hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id()
hte: tegra: fix 'struct of_device_id' build error
hte: Use of_property_present() for testing DT property presence
gpio: tegra186: Add Tegra234 hte support
hte: handle nvidia,gpio-controller property
hte: Deprecate nvidia,slices property
hte: Add Tegra234 provider
hte: Re-phrase tegra API document
arm64: tegra: Add Tegra234 GTE nodes
dt-bindings: timestamp: Deprecate nvidia,slices property
dt-bindings: timestamp: Add Tegra234 support
MAINTAINERS: Add HTE/timestamp subsystem details
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- relocate the LoongArch kernel if the preferred address is already
occupied
- implement BTI annotations for arm64 EFI stub and zboot images
- clean up arm64 zboot Kbuild rules for injecting the kernel code size
* tag 'efi-next-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/zboot: arm64: Grab code size from ELF symbol in payload
efi/zboot: arm64: Inject kernel code size symbol into the zboot payload
efi/zboot: Set forward edge CFI compat header flag if supported
efi/zboot: Add BSS padding before compression
arm64: efi: Enable BTI codegen and add PE/COFF annotation
efi/pe: Import new BTI/IBT header flags from the spec
efi/loongarch: Reintroduce efi_relocate_kernel() to relocate kernel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver updates for 6.4-rc1.
Nothing major, just lots of tiny, constant, forward development. This
includes:
- obligatory n_gsm updates and feature additions
- 8250_em driver updates
- sh-sci driver updates
- dts cleanups and updates
- general cleanups and improvements by Ilpo and Jiri
- other small serial driver core fixes and driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (87 commits)
n_gsm: Use array_index_nospec() with index that comes from userspace
tty: vt: drop checks for undefined VT_SINGLE_DRIVER
tty: vt: distribute EXPORT_SYMBOL()
tty: vt: simplify some cases in tioclinux()
tty: vt: reformat tioclinux()
tty: serial: sh-sci: Fix end of transmission on SCI
tty: serial: sh-sci: Add support for tx end interrupt handling
tty: serial: sh-sci: Fix TE setting on SCI IP
tty: serial: sh-sci: Add RZ/G2L SCIFA DMA rx support
tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support
serial: max310x: fix IO data corruption in batched operations
serial: core: Disable uart_start() on uart_remove_one_port()
serial: 8250: Reinit port->pm on port specific driver unbind
serial: 8250: Add missing wakeup event reporting
tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform
tty: serial: fsl_lpuart: adjust buffer length to the intended size
serial: fix TIOCSRS485 locking
serial: make SiFive serial drivers depend on ARCH_ symbols
tty: synclink_gt: don't allocate and pass dummy flags
tty: serial: simplify qcom_geni_serial_send_chunk_fifo()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt changes for 6.4-rc1.
The "biggest" thing in here is the removal of two obsolete drivers,
u132-hcd and ftdi-elan, making this a net-removal of code overall.
Other than the driver removals, included in here are:
- Thunderbolt updates for new hardware and features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- gadget core and driver updates and features added
- mtu3 driver updates
- dwc2 driver fixes and updates
- usb-serial driver updates
- typec driver updates and fixes
- platform remove callback changes
- dts updates and conversions
- other small changes
All have been in linux-next for a while with no reported problems"
* tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits)
usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API
usb: dwc3: gadget: Execute gadget stop after halting the controller
media: radio-shark: Add endpoint checks
USB: sisusbvga: Add endpoint checks
USB: core: Add routines for endpoint checks in old drivers
usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive
dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk
usb: dwc3: core: add support for disabling High-speed park mode
dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs
usb: mtu3: add optional clock xhci_ck and frmcnt_ck
dt-bindings: usb: mtu3: add two optional clocks
usb: mtu3: expose role-switch control to userspace
usb: mtu3: unlock @mtu->lock just before giving back request
usb: mtu3: fix kernel panic at qmu transfer done irq handler
usb: mtu3: use boolean return value
usb: mtu3: give back request when rx error happens
usb: chipidea: fix missing goto in `ci_hdrc_probe`
usb: gadget: udc: core: Prevent redundant calls to pullup
usb: gadget: udc: core: Invoke usb_gadget_connect only when started
usb: typec: ucsi: don't print PPM init deferred errors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
|
Add GTE LIC and AON GPIO nodes for the tegra234 SoC.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
|
|
The EFI zboot code is not built as part of the kernel proper, like the
ordinary EFI stub, but still needs access to symbols that are defined
only internally in the kernel, and are left unexposed deliberately to
avoid creating ABI inadvertently that we're stuck with later.
So capture the kernel code size of the kernel image, and inject it as an
ELF symbol into the object that contains the compressed payload, where
it will be accessible to zboot code that needs it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Total usage stats now include all that returned errors (instead of
just some)
- Remove maximum hash statesize limit
- Add cloning support for hmac and unkeyed hashes
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build
- Add accelerated AES/GCM stitched implementation on powerpc P10
- Add some test vectors for cmac(camellia)
- Remove failure case where jent is unavailable outside of FIPS mode
in drbg
- Add permanent and intermittent health error checks in jitter RNG
Drivers:
- Add support for 402xx devices in qat
- Add support for HiSTB TRNG
- Fix hash concurrency issues in stm32
- Add OP-TEE firmware support in caam"
* tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits)
i2c: designware: Add doorbell support for Mendocino
i2c: designware: Use PCI PSP driver for communication
powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10
crypto: p10-aes-gcm - Remove POWER10_CPU dependency
crypto: testmgr - Add some test vectors for cmac(camellia)
crypto: cryptd - Add support for cloning hashes
crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm
crypto: hmac - Add support for cloning
crypto: hash - Add crypto_clone_ahash/shash
crypto: api - Add crypto_clone_tfm
crypto: api - Add crypto_tfm_get
crypto: x86/sha - Use local .L symbols for code
crypto: x86/crc32 - Use local .L symbols for code
crypto: x86/aesni - Use local .L symbols for code
crypto: x86/sha256 - Use RIP-relative addressing
crypto: x86/ghash - Use RIP-relative addressing
crypto: x86/des3 - Use RIP-relative addressing
crypto: x86/crc32c - Use RIP-relative addressing
crypto: x86/cast6 - Use RIP-relative addressing
crypto: x86/cast5 - Use RIP-relative addressing
...
|
|
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek,
NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These
all add new features for existing machines, as well as new machines
and SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1
chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its
JH7100 predecessor, but with additional CPU cores and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini gets
added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on
the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the Snapdragon
family.
Including the initial board support for the added SoC platforms, there
are 52 new machines. The largest group are 19 boards industrial
embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit)
families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X)
SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs, including
the rk3588s-khadas-edge2 and a few NanoPi models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete 'oxnas'
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the
Qualcomm Sc7180 'trogdor' design that were never part of products"
* tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits)
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
ARM: dts: nomadik: Replace deprecated spi-gpio properties
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: rockchip: add panel to Anbernic RG353 series
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
...
|
|
Update the compatible for the Realtek RTL8821CS bluetooth node.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
