| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 shadow stack support from Dave Hansen:
"This is the long awaited x86 shadow stack support, part of Intel's
Control-flow Enforcement Technology (CET).
CET consists of two related security features: shadow stacks and
indirect branch tracking. This series implements just the shadow stack
part of this feature, and just for userspace.
The main use case for shadow stack is providing protection against
return oriented programming attacks. It works by maintaining a
secondary (shadow) stack using a special memory type that has
protections against modification. When executing a CALL instruction,
the processor pushes the return address to both the normal stack and
to the special permission shadow stack. Upon RET, the processor pops
the shadow stack copy and compares it to the normal stack copy.
For more information, refer to the links below for the earlier
versions of this patch set"
Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/
Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/
* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/shstk: Change order of __user in type
x86/ibt: Convert IBT selftest to asm
x86/shstk: Don't retry vm_munmap() on -EINTR
x86/kbuild: Fix Documentation/ reference
x86/shstk: Move arch detail comment out of core mm
x86/shstk: Add ARCH_SHSTK_STATUS
x86/shstk: Add ARCH_SHSTK_UNLOCK
x86: Add PTRACE interface for shadow stack
selftests/x86: Add shadow stack test
x86/cpufeatures: Enable CET CR4 bit for shadow stack
x86/shstk: Wire in shadow stack interface
x86: Expose thread features in /proc/$PID/status
x86/shstk: Support WRSS for userspace
x86/shstk: Introduce map_shadow_stack syscall
x86/shstk: Check that signal frame is shadow stack mem
x86/shstk: Check that SSP is aligned on sigreturn
x86/shstk: Handle signals for shadow stack
x86/shstk: Introduce routines modifying shstk
x86/shstk: Handle thread shadow stack
x86/shstk: Add user-mode shadow stack support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
|
|
Both KASAN and KCOV had issues with LTO_CLANG if DEBUG_INFO is enabled.
With LTO inlinable function calls are required to have debug info if they
are inlined into a function that has debug info.
Starting with LLVM 17 this will be fixed ([1],[2]) and enabling LTO with
KASAN/KCOV and DEBUG_INFO doesn't cause linker errors anymore.
Link: https://github.com/llvm/llvm-project/commit/913f7e93dac67ecff47bade862ba42f27cb68ca9
Link: https://github.com/llvm/llvm-project/commit/4a8b1249306ff11f229320abdeadf0c215a00400
Link: https://lkml.kernel.org/r/20230717-enable-kasan-lto1-v3-1-650e1efc19d1@gmail.com
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jakob Koschel <jkl820.git@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "refactor Kconfig to consolidate KEXEC and CRASH options", v6.
The Kconfig is refactored to consolidate KEXEC and CRASH options from
various arch/<arch>/Kconfig files into new file kernel/Kconfig.kexec.
The Kconfig.kexec is now a submenu titled "Kexec and crash features"
located under "General Setup".
The following options are impacted:
- KEXEC
- KEXEC_FILE
- KEXEC_SIG
- KEXEC_SIG_FORCE
- KEXEC_IMAGE_VERIFY_SIG
- KEXEC_BZIMAGE_VERIFY_SIG
- KEXEC_JUMP
- CRASH_DUMP
Over time, these options have been copied between Kconfig files and
are very similar to one another, but with slight differences.
The following architectures are impacted by the refactor (because of
use of one or more KEXEC/CRASH options):
- arm
- arm64
- ia64
- loongarch
- m68k
- mips
- parisc
- powerpc
- riscv
- s390
- sh
- x86
More information:
In the patch series "crash: Kernel handling of CPU and memory hot
un/plug"
https://lore.kernel.org/lkml/20230503224145.7405-1-eric.devolder@oracle.com/
the new kernel feature introduces the config option CRASH_HOTPLUG.
In reviewing, Thomas Gleixner requested that the new config option
not be placed in x86 Kconfig. Rather the option needs a generic/common
home. To Thomas' point, the KEXEC and CRASH options have largely been
duplicated in the various arch/<arch>/Kconfig files, with minor
differences. This kind of proliferation is to be avoid/stopped.
https://lore.kernel.org/lkml/875y91yv63.ffs@tglx/
To that end, I have refactored the arch Kconfigs so as to consolidate
the various KEXEC and CRASH options. Generally speaking, this work has
the following themes:
- KEXEC and CRASH options are moved into new file kernel/Kconfig.kexec
- These items from arch/Kconfig:
CRASH_CORE KEXEC_CORE KEXEC_ELF HAVE_IMA_KEXEC
- These items from arch/x86/Kconfig form the common options:
KEXEC KEXEC_FILE KEXEC_SIG KEXEC_SIG_FORCE
KEXEC_BZIMAGE_VERIFY_SIG KEXEC_JUMP CRASH_DUMP
- These items from arch/arm64/Kconfig form the common options:
KEXEC_IMAGE_VERIFY_SIG
- The crash hotplug series appends CRASH_HOTPLUG to Kconfig.kexec
- The Kconfig.kexec is now a submenu titled "Kexec and crash features"
and is now listed in "General Setup" submenu from init/Kconfig.
- To control the common options, each has a new ARCH_SUPPORTS_<option>
option. These gateway options determine whether the common options
options are valid for the architecture.
- To account for the slight differences in the original architecture
coding of the common options, each now has a corresponding
ARCH_SELECTS_<option> which are used to elicit the same side effects
as the original arch/<arch>/Kconfig files for KEXEC and CRASH options.
An example, 'make menuconfig' illustrating the submenu:
> General setup > Kexec and crash features
[*] Enable kexec system call
[*] Enable kexec file based system call
[*] Verify kernel signature during kexec_file_load() syscall
[ ] Require a valid signature in kexec_file_load() syscall
[ ] Enable bzImage signature verification support
[*] kexec jump
[*] kernel crash dumps
[*] Update the crash elfcorehdr on system configuration changes
In the process of consolidating the common options, I encountered
slight differences in the coding of these options in several of the
architectures. As a result, I settled on the following solution:
- Each of the common options has a 'depends on ARCH_SUPPORTS_<option>'
statement. For example, the KEXEC_FILE option has a 'depends on
ARCH_SUPPORTS_KEXEC_FILE' statement.
This approach is needed on all common options so as to prevent
options from appearing for architectures which previously did
not allow/enable them. For example, arm supports KEXEC but not
KEXEC_FILE. The arch/arm/Kconfig does not provide
ARCH_SUPPORTS_KEXEC_FILE and so KEXEC_FILE and related options
are not available to arm.
- The boolean ARCH_SUPPORTS_<option> in effect allows the arch to
determine when the feature is allowed. Archs which don't have the
feature simply do not provide the corresponding ARCH_SUPPORTS_<option>.
For each arch, where there previously were KEXEC and/or CRASH
options, these have been replaced with the corresponding boolean
ARCH_SUPPORTS_<option>, and an appropriate def_bool statement.
For example, if the arch supports KEXEC_FILE, then the
ARCH_SUPPORTS_KEXEC_FILE simply has a 'def_bool y'. This permits
the KEXEC_FILE option to be available.
If the arch has a 'depends on' statement in its original coding
of the option, then that expression becomes part of the def_bool
expression. For example, arm64 had:
config KEXEC
depends on PM_SLEEP_SMP
and in this solution, this converts to:
config ARCH_SUPPORTS_KEXEC
def_bool PM_SLEEP_SMP
- In order to account for the architecture differences in the
coding for the common options, the ARCH_SELECTS_<option> in the
arch/<arch>/Kconfig is used. This option has a 'depends on
<option>' statement to couple it to the main option, and from
there can insert the differences from the common option and the
arch original coding of that option.
For example, a few archs enable CRYPTO and CRYTPO_SHA256 for
KEXEC_FILE. These require a ARCH_SELECTS_KEXEC_FILE and
'select CRYPTO' and 'select CRYPTO_SHA256' statements.
Illustrating the option relationships:
For each of the common KEXEC and CRASH options:
ARCH_SUPPORTS_<option> <- <option> <- ARCH_SELECTS_<option>
<option> # in Kconfig.kexec
ARCH_SUPPORTS_<option> # in arch/<arch>/Kconfig, as needed
ARCH_SELECTS_<option> # in arch/<arch>/Kconfig, as needed
For example, KEXEC:
ARCH_SUPPORTS_KEXEC <- KEXEC <- ARCH_SELECTS_KEXEC
KEXEC # in Kconfig.kexec
ARCH_SUPPORTS_KEXEC # in arch/<arch>/Kconfig, as needed
ARCH_SELECTS_KEXEC # in arch/<arch>/Kconfig, as needed
To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be
enabled, and the ARCH_SELECTS_<option> handles side effects (ie.
select statements).
Examples:
A few examples to show the new strategy in action:
===== x86 (minus the help section) =====
Original:
config KEXEC
bool "kexec system call"
select KEXEC_CORE
config KEXEC_FILE
bool "kexec file based system call"
select KEXEC_CORE
select HAVE_IMA_KEXEC if IMA
depends on X86_64
depends on CRYPTO=y
depends on CRYPTO_SHA256=y
config ARCH_HAS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config KEXEC_SIG
bool "Verify kernel signature during kexec_file_load() syscall"
depends on KEXEC_FILE
config KEXEC_SIG_FORCE
bool "Require a valid signature in kexec_file_load() syscall"
depends on KEXEC_SIG
config KEXEC_BZIMAGE_VERIFY_SIG
bool "Enable bzImage signature verification support"
depends on KEXEC_SIG
depends on SIGNED_PE_FILE_VERIFICATION
select SYSTEM_TRUSTED_KEYRING
config CRASH_DUMP
bool "kernel crash dumps"
depends on X86_64 || (X86_32 && HIGHMEM)
config KEXEC_JUMP
bool "kexec jump"
depends on KEXEC && HIBERNATION
help
becomes...
New:
config ARCH_SUPPORTS_KEXEC
def_bool y
config ARCH_SUPPORTS_KEXEC_FILE
def_bool X86_64 && CRYPTO && CRYPTO_SHA256
config ARCH_SELECTS_KEXEC_FILE
def_bool y
depends on KEXEC_FILE
select HAVE_IMA_KEXEC if IMA
config ARCH_SUPPORTS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config ARCH_SUPPORTS_KEXEC_SIG
def_bool y
config ARCH_SUPPORTS_KEXEC_SIG_FORCE
def_bool y
config ARCH_SUPPORTS_KEXEC_BZIMAGE_VERIFY_SIG
def_bool y
config ARCH_SUPPORTS_KEXEC_JUMP
def_bool y
config ARCH_SUPPORTS_CRASH_DUMP
def_bool X86_64 || (X86_32 && HIGHMEM)
===== powerpc (minus the help section) =====
Original:
config KEXEC
bool "kexec system call"
depends on PPC_BOOK3S || PPC_E500 || (44x && !SMP)
select KEXEC_CORE
config KEXEC_FILE
bool "kexec file based system call"
select KEXEC_CORE
select HAVE_IMA_KEXEC if IMA
select KEXEC_ELF
depends on PPC64
depends on CRYPTO=y
depends on CRYPTO_SHA256=y
config ARCH_HAS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config CRASH_DUMP
bool "Build a dump capture kernel"
depends on PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)
select RELOCATABLE if PPC64 || 44x || PPC_85xx
becomes...
New:
config ARCH_SUPPORTS_KEXEC
def_bool PPC_BOOK3S || PPC_E500 || (44x && !SMP)
config ARCH_SUPPORTS_KEXEC_FILE
def_bool PPC64 && CRYPTO=y && CRYPTO_SHA256=y
config ARCH_SUPPORTS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config ARCH_SELECTS_KEXEC_FILE
def_bool y
depends on KEXEC_FILE
select KEXEC_ELF
select HAVE_IMA_KEXEC if IMA
config ARCH_SUPPORTS_CRASH_DUMP
def_bool PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)
config ARCH_SELECTS_CRASH_DUMP
def_bool y
depends on CRASH_DUMP
select RELOCATABLE if PPC64 || 44x || PPC_85xx
Testing Approach and Results
There are 388 config files in the arch/<arch>/configs directories.
For each of these config files, a .config is generated both before and
after this Kconfig series, and checked for equivalence. This approach
allows for a rather rapid check of all architectures and a wide
variety of configs wrt/ KEXEC and CRASH, and avoids requiring
compiling for all architectures and running kernels and run-time
testing.
For each config file, the olddefconfig, allnoconfig and allyesconfig
targets are utilized. In testing the randconfig has revealed problems
as well, but is not used in the before and after equivalence check
since one can not generate the "same" .config for before and after,
even if using the same KCONFIG_SEED since the option list is
different.
As such, the following script steps compare the before and after
of 'make olddefconfig'. The new symbols introduced by this series
are filtered out, but otherwise the config files are PASS only if
they were equivalent, and FAIL otherwise.
The script performs the test by doing the following:
# Obtain the "golden" .config output for given config file
# Reset test sandbox
git checkout master
git branch -D test_Kconfig
git checkout -B test_Kconfig master
make distclean
# Write out updated config
cp -f <config file> .config
make ARCH=<arch> olddefconfig
# Track each item in .config, LHSB is "golden"
scoreboard .config
# Obtain the "changed" .config output for given config file
# Reset test sandbox
make distclean
# Apply this Kconfig series
git am <this Kconfig series>
# Write out updated config
cp -f <config file> .config
make ARCH=<arch> olddefconfig
# Track each item in .config, RHSB is "changed"
scoreboard .config
# Determine test result
# Filter-out new symbols introduced by this series
# Filter-out symbol=n which not in either scoreboard
# Compare LHSB "golden" and RHSB "changed" scoreboards and issue PASS/FAIL
The script was instrumental during the refactoring of Kconfig as it
continually revealed problems. The end result being that the solution
presented in this series passes all configs as checked by the script,
with the following exceptions:
- arch/ia64/configs/zx1_config with olddefconfig
This config file has:
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
and this refactor now couples KEXEC to CRASH_DUMP, so it is not
possible to enable CRASH_DUMP without KEXEC.
- arch/sh/configs/* with allyesconfig
The arch/sh/Kconfig codes CRASH_DUMP as dependent upon BROKEN_ON_MMU
(which clearly is not meant to be set). This symbol is not provided
but with the allyesconfig it is set to yes which enables CRASH_DUMP.
But KEXEC is coded as dependent upon MMU, and is set to no in
arch/sh/mm/Kconfig, so KEXEC is not enabled.
This refactor now couples KEXEC to CRASH_DUMP, so it is not
possible to enable CRASH_DUMP without KEXEC.
While the above exceptions are not equivalent to their original,
the config file produced is valid (and in fact better wrt/ CRASH_DUMP
handling).
This patch (of 14)
The config options for kexec and crash features are consolidated
into new file kernel/Kconfig.kexec. Under the "General Setup" submenu
is a new submenu "Kexec and crash handling". All the kexec and
crash options that were once in the arch-dependent submenu "Processor
type and features" are now consolidated in the new submenu.
The following options are impacted:
- KEXEC
- KEXEC_FILE
- KEXEC_SIG
- KEXEC_SIG_FORCE
- KEXEC_BZIMAGE_VERIFY_SIG
- KEXEC_JUMP
- CRASH_DUMP
The three main options are KEXEC, KEXEC_FILE and CRASH_DUMP.
Architectures specify support of certain KEXEC and CRASH features with
similarly named new ARCH_SUPPORTS_<option> config options.
Architectures can utilize the new ARCH_SELECTS_<option> config
options to specify additional components when <option> is enabled.
To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be
enabled, and the ARCH_SELECTS_<option> handles side effects (ie.
select statements).
Link: https://lkml.kernel.org/r/20230712161545.87870-1-eric.devolder@oracle.com
Link: https://lkml.kernel.org/r/20230712161545.87870-2-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Cc. "H. Peter Anvin" <hpa@zytor.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Juerg Haefliger <juerg.haefliger@canonical.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Aurèle La France <tsi@tuyoix.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Xin Li <xin3.li@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some architectures allows partial SMT states, i.e. when not all SMT threads
are brought online.
To support that, add an architecture helper which checks whether a given
CPU is allowed to be brought online depending on how many SMT threads are
currently enabled. Since this is only applicable to architecture supporting
partial SMT, only these architectures should select the new configuration
variable CONFIG_SMT_NUM_THREADS_DYNAMIC. For the other architectures, not
supporting the partial SMT states, there is no need to define
topology_cpu_smt_allowed(), the generic code assumed that all the threads
are allowed or only the primary ones.
Call the helper from cpu_smt_enable(), and cpu_smt_allowed() when SMT is
enabled, to check if the particular thread should be onlined. Notably,
also call it from cpu_smt_disable() if CPU_SMT_ENABLED, to allow
offlining some threads to move from a higher to lower number of threads
online.
[ ldufour: Slightly reword the commit's description ]
[ ldufour: Introduce CONFIG_SMT_NUM_THREADS_DYNAMIC ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230705145143.40545-7-ldufour@linux.ibm.com
|
|
The x86 Shadow stack feature includes a new type of memory called shadow
stack. This shadow stack memory has some unusual properties, which requires
some core mm changes to function properly.
One of these unusual properties is that shadow stack memory is writable,
but only in limited ways. These limits are applied via a specific PTE
bit combination. Nevertheless, the memory is writable, and core mm code
will need to apply the writable permissions in the typical paths that
call pte_mkwrite(). The goal is to make pte_mkwrite() take a VMA, so
that the x86 implementation of it can know whether to create regular
writable or shadow stack mappings.
But there are a couple of challenges to this. Modifying the signatures of
each arch pte_mkwrite() implementation would be error prone because some
are generated with macros and would need to be re-implemented. Also, some
pte_mkwrite() callers operate on kernel memory without a VMA.
So this can be done in a three step process. First pte_mkwrite() can be
renamed to pte_mkwrite_novma() in each arch, with a generic pte_mkwrite()
added that just calls pte_mkwrite_novma(). Next callers without a VMA can
be moved to pte_mkwrite_novma(). And lastly, pte_mkwrite() and all callers
can be changed to take/pass a VMA.
Start the process by renaming pte_mkwrite() to pte_mkwrite_novma() and
adding the pte_mkwrite() wrapper in linux/pgtable.h. Apply the same
pattern for pmd_mkwrite(). Since not all archs have a pmd_mkwrite_novma(),
create a new arch config HAS_HUGE_PAGE that can be used to tell if
pmd_mkwrite() should be defined. Otherwise in the !HAS_HUGE_PAGE cases the
compiler would not be able to find pmd_mkwrite_novma().
No functional change.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/lkml/CAHk-=wiZjSu7c9sFYZb3q04108stgHff2wfbokGCCgW7riz+8Q@mail.gmail.com/
Link: https://lore.kernel.org/all/20230613001108.3040476-2-rick.p.edgecombe%40intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
directories
- Douglas Anderson has added a new "buddy" mode to the hardlockup
detector. It permits the detector to work on architectures which
cannot provide the required interrupts, by having CPUs periodically
perform checks on other CPUs
- Zhen Lei has enhanced kexec's ability to support two crash regions
- Petr Mladek has done a lot of cleanup on the hard lockup detector's
Kconfig entries
- And the usual bunch of singleton patches in various places
* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
kernel/time/posix-stubs.c: remove duplicated include
ocfs2: remove redundant assignment to variable bit_off
watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
devres: show which resource was invalid in __devm_ioremap_resource()
watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
watchdog/hardlockup: make the config checks more straightforward
watchdog/hardlockup: sort hardlockup detector related config values a logical way
watchdog/hardlockup: move SMP barriers from common code to buddy code
watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"Add support for Landlock to UML.
To do this, this fixes the way hostfs manages inodes according to the
underlying filesystem [1]. They are now properly handled as for other
filesystems, which enables Landlock support (and probably other
features).
This also extends Landlock's tests with 6 pseudo filesystems,
including hostfs"
[1] https://lore.kernel.org/all/20230612191430.339153-1-mic@digikod.net/
* tag 'landlock-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add hostfs tests
selftests/landlock: Add tests for pseudo filesystems
selftests/landlock: Make mounts configurable
selftests/landlock: Add supports_filesystem() helper
selftests/landlock: Don't create useless file layouts
hostfs: Fix ephemeral inodes
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.
This can be reduced significantly by splitting the bringup
mechanism into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.
The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.
If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"
* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...
|
|
There are several hardlockup detector implementations and several Kconfig
values which allow selection and build of the preferred one.
CONFIG_HARDLOCKUP_DETECTOR was introduced by the commit 23637d477c1f53acb
("lockup_detector: Introduce CONFIG_HARDLOCKUP_DETECTOR") in v2.6.36.
It was a preparation step for introducing the new generic perf hardlockup
detector.
The existing arch-specific variants did not support the to-be-created
generic build configurations, sysctl interface, etc. This distinction
was made explicit by the commit 4a7863cc2eb5f98 ("x86, nmi_watchdog:
Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR")
in v2.6.38.
CONFIG_HAVE_NMI_WATCHDOG was introduced by the commit d314d74c695f967e105
("nmi watchdog: do not use cpp symbol in Kconfig") in v3.4-rc1. It replaced
the above mentioned ARCH_HAS_NMI_WATCHDOG. At that time, it was still used
by three architectures, namely blackfin, mn10300, and sparc.
The support for blackfin and mn10300 architectures has been completely
dropped some time ago. And sparc is the only architecture with the historic
NMI watchdog at the moment.
And the old sparc implementation is really special. It is always built on
sparc64. It used to be always enabled until the commit 7a5c8b57cec93196b
("sparc: implement watchdog_nmi_enable and watchdog_nmi_disable") added
in v4.10-rc1.
There are only few locations where the sparc64 NMI watchdog interacts
with the generic hardlockup detectors code:
+ implements arch_touch_nmi_watchdog() which is called from the generic
touch_nmi_watchdog()
+ implements watchdog_hardlockup_enable()/disable() to support
/proc/sys/kernel/nmi_watchdog
+ is always preferred over other generic watchdogs, see
CONFIG_HARDLOCKUP_DETECTOR
+ includes asm/nmi.h into linux/nmi.h because some sparc-specific
functions are needed in sparc-specific code which includes
only linux/nmi.h.
The situation became more complicated after the commit 05a4a95279311c3
("kernel/watchdog: split up config options") and commit 2104180a53698df5
("powerpc/64s: implement arch-specific hardlockup watchdog") in v4.13-rc1.
They introduced HAVE_HARDLOCKUP_DETECTOR_ARCH. It was used for powerpc
specific hardlockup detector. It was compatible with the perf one
regarding the general boot, sysctl, and programming interfaces.
HAVE_HARDLOCKUP_DETECTOR_ARCH was defined as a superset of
HAVE_NMI_WATCHDOG. It made some sense because all arch-specific
detectors had some common requirements, namely:
+ implemented arch_touch_nmi_watchdog()
+ included asm/nmi.h into linux/nmi.h
+ defined the default value for /proc/sys/kernel/nmi_watchdog
But it actually has made things pretty complicated when the generic
buddy hardlockup detector was added. Before the generic perf detector
was newer supported together with an arch-specific one. But the buddy
detector could work on any SMP system. It means that an architecture
could support both the arch-specific and buddy detector.
As a result, there are few tricky dependencies. For example,
CONFIG_HARDLOCKUP_DETECTOR depends on:
((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH
The problem is that the very special sparc implementation is defined as:
HAVE_NMI_WATCHDOG && !HAVE_HARDLOCKUP_DETECTOR_ARCH
Another problem is that the meaning of HAVE_NMI_WATCHDOG is far from clear
without reading understanding the history.
Make the logic less tricky and more self-explanatory by making
HAVE_NMI_WATCHDOG specific for the sparc64 implementation. And rename it to
HAVE_HARDLOCKUP_DETECTOR_SPARC64.
Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF,
and HARDLOCKUP_DETECTOR_BUDDY may conflict only with
HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR
and it is not longer enabled when HAVE_NMI_WATCHDOG is set.
Link: https://lkml.kernel.org/r/20230616150618.6073-5-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are four possible variants of hardlockup detectors:
+ buddy: available when SMP is set.
+ perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set.
+ arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set.
+ sparc64 special variant: available when HAVE_NMI_WATCHDOG is set
and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set.
The check for the sparc64 variant is more complicated because
HAVE_NMI_WATCHDOG is used to #ifdef code used by both arch-specific
and sparc64 specific variant. Therefore it is automatically
selected with HAVE_HARDLOCKUP_DETECTOR_ARCH.
This complexity is partly hidden in HAVE_HARDLOCKUP_DETECTOR_NON_ARCH.
It reduces the size of some checks but it makes them harder to follow.
Finally, the other temporary variable HARDLOCKUP_DETECTOR_NON_ARCH
is used to re-compute HARDLOCKUP_DETECTOR_PERF/BUDDY when the global
HARDLOCKUP_DETECTOR switch is enabled/disabled.
Make the logic more straightforward by the following changes:
+ Better explain the role of HAVE_HARDLOCKUP_DETECTOR_ARCH and
HAVE_NMI_WATCHDOG in comments.
+ Add HAVE_HARDLOCKUP_DETECTOR_BUDDY so that there is separate
HAVE_* for all four hardlockup detector variants.
Use it in the other conditions instead of SMP. It makes it
clear that it is about the buddy detector.
+ Open code HAVE_HARDLOCKUP_DETECTOR_NON_ARCH in HARDLOCKUP_DETECTOR
and HARDLOCKUP_DETECTOR_PREFER_BUDDY. It helps to understand
the conditions between the four hardlockup detector variants.
+ Define the exact conditions when HARDLOCKUP_DETECTOR_PERF/BUDDY
can be enabled. It explains the dependency on the other
hardlockup detector variants.
Also it allows to remove HARDLOCKUP_DETECTOR_NON_ARCH by using "imply".
It triggers re-evaluating HARDLOCKUP_DETECTOR_PERF/BUDDY when
the global HARDLOCKUP_DETECTOR switch is changed.
+ Add dependency on HARDLOCKUP_DETECTOR so that the affected variables
disappear when the hardlockup detectors are disabled.
Another nice side effect is that HARDLOCKUP_DETECTOR_PREFER_BUDDY
value is not preserved when the global switch is disabled.
The user has to make the decision again when it gets re-enabled.
Link: https://lkml.kernel.org/r/20230616150618.6073-3-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
watchdog_hardlockup_probe()
Right now there is one arch (sparc64) that selects HAVE_NMI_WATCHDOG
without selecting HAVE_HARDLOCKUP_DETECTOR_ARCH. Because of that one
architecture, we have some special case code in the watchdog core to
handle the fact that watchdog_hardlockup_probe() isn't implemented.
Let's implement watchdog_hardlockup_probe() for sparc64 and get rid of the
special case.
As a side effect of doing this, code inspection tells us that we could fix
a minor bug where the system won't properly realize that NMI watchdogs are
disabled. Specifically, on powerpc if CONFIG_PPC_WATCHDOG is turned off
the arch might still select CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH which
selects CONFIG_HAVE_NMI_WATCHDOG. Since CONFIG_PPC_WATCHDOG was off then
nothing will override the "weak" watchdog_hardlockup_probe() and we'll
fallback to looking at CONFIG_HAVE_NMI_WATCHDOG.
Link: https://lkml.kernel.org/r/20230526184139.2.Ic6ebbf307ca0efe91f08ce2c1eb4a037ba6b0700@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
check_bugs() has become a dumping ground for all sorts of activities to
finalize the CPU initialization before running the rest of the init code.
Most are empty, a few do actual bug checks, some do alternative patching
and some cobble a CPU advertisement string together....
Aside of that the current implementation requires duplicated function
declaration and mostly empty header files for them.
Provide a new function arch_cpu_finalize_init(). Provide a generic
declaration if CONFIG_ARCH_HAS_CPU_FINALIZE_INIT is selected and a stub
inline otherwise.
This requires a temporary #ifdef in start_kernel() which will be removed
along with check_bugs() once the architectures are converted over.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224544.957805717@linutronix.de
|
|
hostfs creates a new inode for each opened or created file, which
created useless inode allocations and forbade identifying a host file
with a kernel inode.
Fix this uncommon filesystem behavior by tying kernel inodes to host
file's inode and device IDs. Even if the host filesystem inodes may be
recycled, this cannot happen while a file referencing it is opened,
which is the case with hostfs. It should be noted that hostfs inode IDs
may not be unique for the same hostfs superblock because multiple host's
(backed) superblocks may be used.
Delete inodes when dropping them to force backed host's file descriptors
closing.
This enables to entirely remove ARCH_EPHEMERAL_INODES, and then makes
Landlock fully supported by UML. This is very useful for testing
changes.
These changes also factor out and simplify some helpers thanks to the
new hostfs_inode_update() and the hostfs_iget() revamp: read_name(),
hostfs_create(), hostfs_lookup(), hostfs_mknod(), and
hostfs_fill_sb_common().
A following commit with new Landlock tests check this new hostfs inode
consistency.
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20230612191430.339153-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
There is often significant latency in the early stages of CPU bringup, and
time is wasted by waking each CPU (e.g. with SIPI/INIT/INIT on x86) and
then waiting for it to respond before moving on to the next.
Allow a platform to enable parallel setup which brings all to be onlined
CPUs up to the CPUHP_BP_KICK_AP state. While this state advancement on the
control CPU (BP) is single-threaded the important part is the last state
CPUHP_BP_KICK_AP which wakes the to be onlined CPUs up.
This allows the CPUs to run up to the first sychronization point
cpuhp_ap_sync_alive() where they wait for the control CPU to release them
one by one for the full onlining procedure.
This parallelism depends on the CPU hotplug core sync mechanism which
ensures that the parallel brought up CPUs wait for release before touching
any state which would make the CPU visible to anything outside the hotplug
control mechanism.
To handle the SMT constraints of X86 correctly the bringup happens in two
iterations when CONFIG_HOTPLUG_SMT is enabled. The control CPU brings up
the primary SMT threads of each core first, which can load the microcode
without the need to rendevouz with the thread siblings. Once that's
completed it brings up the secondary SMT threads.
Co-developed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205257.240231377@linutronix.de
|
|
The bring up logic of a to be onlined CPU consists of several parts, which
are considered to be a single hotplug state:
1) Control CPU issues the wake-up
2) To be onlined CPU starts up, does the minimal initialization,
reports to be alive and waits for release into the complete bring-up.
3) Control CPU waits for the alive report and releases the upcoming CPU
for the complete bring-up.
Allow to split this into two states:
1) Control CPU issues the wake-up
After that the to be onlined CPU starts up, does the minimal
initialization, reports to be alive and waits for release into the
full bring-up. As this can run after the control CPU dropped the
hotplug locks the code which is executed on the AP before it reports
alive has to be carefully audited to not violate any of the hotplug
constraints, especially not modifying any of the various cpumasks.
This is really only meant to avoid waiting for the AP to react on the
wake-up. Of course an architecture can move strict CPU related setup
functionality, e.g. microcode loading, with care before the
synchronization point to save further pointless waiting time.
2) Control CPU waits for the alive report and releases the upcoming CPU
for the complete bring-up.
This allows that the two states can be split up to run all to be onlined
CPUs up to state #1 on the control CPU and then at a later point run state
#2. This spares some of the latencies of the full serialized per CPU
bringup by avoiding the per CPU wakeup/wait serialization. The assumption
is that the first AP already waits when the last AP has been woken up. This
obvioulsy depends on the hardware latencies and depending on the timings
this might still not completely eliminate all wait scenarios.
This split is just a preparatory step for enabling the parallel bringup
later. The boot time bringup is still fully serialized. It has a separate
config switch so that architectures which want to support parallel bringup
can test the split of the CPUHP_BRINGUG step separately.
To enable this the architecture must support the CPU hotplug core sync
mechanism and has to be audited that there are no implicit hotplug state
dependencies which require a fully serialized bringup.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205257.080801387@linutronix.de
|
|
The CPU state tracking and synchronization mechanism in smpboot.c is
completely independent of the hotplug code and all logic around it is
implemented in architecture specific code.
Except for the state reporting of the AP there is absolutely nothing
architecture specific and the sychronization and decision functions can be
moved into the generic hotplug core code.
Provide an integrated variant and add the core synchronization and decision
points. This comes in two flavours:
1) DEAD state synchronization
Updated by the architecture code once the AP reaches the point where
it is ready to be torn down by the control CPU, e.g. by removing power
or clocks or tear down via the hypervisor.
The control CPU waits for this state to be reached with a timeout. If
the state is reached an architecture specific cleanup function is
invoked.
2) Full state synchronization
This extends #1 with AP alive synchronization. This is new
functionality, which allows to replace architecture specific wait
mechanims, e.g. cpumasks, completely.
It also prevents that an AP which is in a limbo state can be brought
up again. This can happen when an AP failed to report dead state
during a previous off-line operation.
The dead synchronization is what most architectures use. Only x86 makes a
bringup decision based on that state at the moment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205256.476305035@linutronix.de
|
|
On big systems, the mm refcount can become highly contented when doing a
lot of context switching with threaded applications. user<->idle switch
is one of the important cases. Abandoning lazy tlb entirely slows this
switching down quite a bit in the common uncontended case, so that is not
viable.
Implement a scheme where lazy tlb mm references do not contribute to the
refcount, instead they get explicitly removed when the refcount reaches
zero.
The final mmdrop() sends IPIs to all CPUs in the mm_cpumask and they
switch away from this mm to init_mm if it was being used as the lazy tlb
mm. Enabling the shoot lazies option therefore requires that the arch
ensures that mm_cpumask contains all CPUs that could possibly be using mm.
A DEBUG_VM option IPIs every CPU in the system after this to ensure there
are no references remaining before the mm is freed.
Shootdown IPIs cost could be an issue, but they have not been observed to
be a serious problem with this scheme, because short-lived processes tend
not to migrate CPUs much, therefore they don't get much chance to leave
lazy tlb mm references on remote CPUs. There are a lot of options to
reduce them if necessary, described in comments.
The near-worst-case can be benchmarked with will-it-scale:
context_switch1_threads -t $(($(nproc) / 2))
This will create nproc threads (nproc / 2 switching pairs) all sharing the
same mm that spread over all CPUs so each CPU does thread->idle->thread
switching.
[ Rik came up with basically the same idea a few years ago, so credit
to him for that. ]
Link: https://lore.kernel.org/linux-mm/20230118080011.2258375-1-npiggin@gmail.com/
Link: https://lore.kernel.org/all/20180728215357.3249-11-riel@surriel.com/
Link: https://lkml.kernel.org/r/20230203071837.1136453-5-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add CONFIG_MMU_TLB_REFCOUNT which enables refcounting of the lazy tlb mm
when it is context switched. This can be disabled by architectures that
don't require this refcounting if they clean up lazy tlb mms when the last
refcount is dropped. Currently this is always enabled, so the patch
introduces no functional change.
Link: https://lkml.kernel.org/r/20230203071837.1136453-4-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.
Link: https://lkml.kernel.org/r/20230201162435.218368-1-juerg.haefliger@canonical.com
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Dan Li <ashimida@linux.alibaba.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Juerg Haefliger <juerg.haefliger@canonical.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix Kconfig dependencies to re-allow the enabling of function graph
tracer and shadow call stacks at the same time.
- Revert the workaround for CPU erratum #2645198 since the CONFIG_
guards were incorrect and the code has therefore not seen any real
exposure in -next.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Revert "arm64: errata: Workaround possible Cortex-A715 [ESR|FAR]_ELx corruption"
ftrace: Allow WITH_ARGS flavour of graph tracer with shadow call stack
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Borislav Petkov:
- Add the call depth tracking mitigation for Retbleed which has been
long in the making. It is a lighterweight software-only fix for
Skylake-based cores where enabling IBRS is a big hammer and causes a
significant performance impact.
What it basically does is, it aligns all kernel functions to 16 bytes
boundary and adds a 16-byte padding before the function, objtool
collects all functions' locations and when the mitigation gets
applied, it patches a call accounting thunk which is used to track
the call depth of the stack at any time.
When that call depth reaches a magical, microarchitecture-specific
value for the Return Stack Buffer, the code stuffs that RSB and
avoids its underflow which could otherwise lead to the Intel variant
of Retbleed.
This software-only solution brings a lot of the lost performance
back, as benchmarks suggest:
https://lore.kernel.org/all/20220915111039.092790446@infradead.org/
That page above also contains a lot more detailed explanation of the
whole mechanism
- Implement a new control flow integrity scheme called FineIBT which is
based on the software kCFI implementation and uses hardware IBT
support where present to annotate and track indirect branches using a
hash to validate them
- Other misc fixes and cleanups
* tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
x86/paravirt: Use common macro for creating simple asm paravirt functions
x86/paravirt: Remove clobber bitmask from .parainstructions
x86/debug: Include percpu.h in debugreg.h to get DECLARE_PER_CPU() et al
x86/cpufeatures: Move X86_FEATURE_CALL_DEPTH from bit 18 to bit 19 of word 11, to leave space for WIP X86_FEATURE_SGX_EDECCSSA bit
x86/Kconfig: Enable kernel IBT by default
x86,pm: Force out-of-line memcpy()
objtool: Fix weak hole vs prefix symbol
objtool: Optimize elf_dirty_reloc_sym()
x86/cfi: Add boot time hash randomization
x86/cfi: Boot time selection of CFI scheme
x86/ibt: Implement FineIBT
objtool: Add --cfi to generate the .cfi_sites section
x86: Add prefix symbols for function padding
objtool: Add option to generate prefix symbols
objtool: Avoid O(bloody terrible) behaviour -- an ode to libelf
objtool: Slice up elf_create_section_symbol()
kallsyms: Revert "Take callthunks into account"
x86: Unconfuse CONFIG_ and X86_FEATURE_ namespaces
x86/retpoline: Fix crash printing warning
x86/paravirt: Fix a !PARAVIRT build warning
...
|
|
The recent switch on arm64 from DYNAMIC_FTRACE_WITH_REGS to
DYNAMIC_FTRACE_WITH_ARGS failed to take into account that we currently
require the former in order to allow the function graph tracer to be
enabled in combination with shadow call stacks. This means that this is
no longer permitted at all, in spite of the fact that either flavour of
ftrace works perfectly fine in this combination.
So permit WITH_ARGS as well as WITH_REGS.
Fixes: ddc9863e9e90 ("scs: Disable when function graph tracing is enabled")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20221213132407.1485025-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights this time are support for dynamically enabling and
disabling Clang's Shadow Call Stack at boot and a long-awaited
optimisation to the way in which we handle the SVE register state on
system call entry to avoid taking unnecessary traps from userspace.
Summary:
ACPI:
- Enable FPDT support for boot-time profiling
- Fix CPU PMU probing to work better with PREEMPT_RT
- Update SMMUv3 MSI DeviceID parsing to latest IORT spec
- APMT support for probing Arm CoreSight PMU devices
CPU features:
- Advertise new SVE instructions (v2.1)
- Advertise range prefetch instruction
- Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
- Enable DIT (Data Independent Timing) when running in the kernel
- More conversion of system register fields over to the generated
header
CPU misfeatures:
- Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
- Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's pointer
authentication feature when it is supported (complete with scary
DWARF parser!)
Tracing and debug:
- Remove static ftrace in favour of, err, dynamic ftrace!
- Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace
and existing arch code
- Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the
old FTRACE_WITH_REGS
- Extend 'crashkernel=' parameter with default value and fallback to
placement above 4G physical if initial (low) allocation fails
SVE:
- Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
- Rework of undefined instruction handling to avoid serialisation on
global lock (this includes emulation of user accesses to the ID
registers)
Perf and PMU:
- Support for TLP filters in Hisilicon's PCIe PMU device
- Support for the DDR PMU present in Amlogic Meson G12 SoCs
- Support for the terribly-named "CoreSight PMU" architecture from
Arm (and Nvidia's implementation of said architecture)
Misc:
- Tighten up our boot protocol for systems with memory above 52 bits
physical
- Const-ify static keys to satisty jump label asm constraints
- Trivial FFA driver cleanups in preparation for v1.1 support
- Export the kernel_neon_* APIs as GPL symbols
- Harden our instruction generation routines against instrumentation
- A bunch of robustness improvements to our arch-specific selftests
- Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits)
arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
arm64: Prohibit instrumentation on arch_stack_walk()
arm64:uprobe fix the uprobe SWBP_INSN in big-endian
arm64: alternatives: add __init/__initconst to some functions/variables
arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init()
kselftest/arm64: Allow epoll_wait() to return more than one result
kselftest/arm64: Don't drain output while spawning children
kselftest/arm64: Hold fp-stress children until they're all spawned
arm64/sysreg: Remove duplicate definitions from asm/sysreg.h
arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation
arm64/sysreg: Convert MVFR2_EL1 to automatic generation
arm64/sysreg: Convert MVFR1_EL1 to automatic generation
arm64/sysreg: Convert MVFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation
...
|
|
In order to allow arches to use code patching to conditionally emit the
shadow stack pushes and pops, rather than always taking the performance
hit even on CPUs that implement alternatives such as stack pointer
authentication on arm64, add a Kconfig symbol that can be set by the
arch to omit the SCS codegen itself, without otherwise affecting how
support code for SCS and compiler options (for register reservation, for
instance) are emitted.
Also, add a static key and some plumbing to omit the allocation of
shadow call stack for dynamic SCS configurations if SCS is disabled at
runtime.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20221027155908.1940624-3-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On strict load-store architectures, the use of this_cpu_inc() by
srcu_read_lock() and srcu_read_unlock() is not NMI-safe in TREE SRCU.
To see this suppose that an NMI arrives in the middle of srcu_read_lock(),
just after it has read ->srcu_lock_count, but before it has written
the incremented value back to memory. If that NMI handler also does
srcu_read_lock() and srcu_read_lock() on that same srcu_struct structure,
then upon return from that NMI handler, the interrupted srcu_read_lock()
will overwrite the NMI handler's update to ->srcu_lock_count, but
leave unchanged the NMI handler's update by srcu_read_unlock() to
->srcu_unlock_count.
This can result in a too-short SRCU grace period, which can in turn
result in arbitrary memory corruption.
If the NMI handler instead interrupts the srcu_read_unlock(), this
can result in eternal SRCU grace periods, which is not much better.
This commit therefore creates a pair of new srcu_read_lock_nmisafe()
and srcu_read_unlock_nmisafe() functions, which allow SRCU readers in
both NMI handlers and in process and IRQ context. It is bad practice
to mix the existing and the new _nmisafe() primitives on the same
srcu_struct structure. Use one set or the other, not both.
Just to underline that "bad practice" point, using srcu_read_lock() at
process level and srcu_read_lock_nmisafe() in your NMI handler will not,
repeat NOT, work. If you do not immediately understand why this is the
case, please review the earlier paragraphs in this commit log.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Apply feedback from Randy Dunlap. ]
[ paulmck: Apply feedback from John Ogness. ]
[ paulmck: Apply feedback from Frederic Weisbecker. ]
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
|
|
Generic function-alignment infrastructure.
Architectures can select FUNCTION_ALIGNMENT_xxB symbols; the
FUNCTION_ALIGNMENT symbol is then set to the largest such selected
size, 0 otherwise.
From this the -falign-functions compiler argument and __ALIGN macro
are set.
This incorporates the DEBUG_FORCE_FUNCTION_ALIGN_64B knob and future
alignment requirements for x86_64 (later in this series) into a single
place.
NOTE: also removes the 0x90 filler byte from the generic __ALIGN
primitive, that value makes no sense outside of x86.
NOTE: .balign 0 reverts to a no-op.
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111143.719248727@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kcfi updates from Kees Cook:
"This replaces the prior support for Clang's standard Control Flow
Integrity (CFI) instrumentation, which has required a lot of special
conditions (e.g. LTO) and work-arounds.
The new implementation ("Kernel CFI") is specific to C, directly
designed for the Linux kernel, and takes advantage of architectural
features like x86's IBT. This series retains arm64 support and adds
x86 support.
GCC support is expected in the future[1], and additional "generic"
architectural support is expected soon[2].
Summary:
- treewide: Remove old CFI support details
- arm64: Replace Clang CFI support with Clang KCFI support
- x86: Introduce Clang KCFI support"
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107048 [1]
Link: https://github.com/samitolvanen/llvm-project/commits/kcfi_generic [2]
* tag 'kcfi-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
x86: Add support for CONFIG_CFI_CLANG
x86/purgatory: Disable CFI
x86: Add types to indirectly called assembly functions
x86/tools/relocs: Ignore __kcfi_typeid_ relocations
kallsyms: Drop CONFIG_CFI_CLANG workarounds
objtool: Disable CFI warnings
objtool: Preserve special st_shndx indexes in elf_update_symbol
treewide: Drop __cficanonical
treewide: Drop WARN_ON_FUNCTION_MISMATCH
treewide: Drop function_nocfi
init: Drop __nocfi from __init
arm64: Drop unneeded __nocfi attributes
arm64: Add CFI error handling
arm64: Add types to indirect called assembly functions
psci: Fix the function type for psci_initcall_t
lkdtm: Emit an indirect call for CFI tests
cfi: Add type helper macros
cfi: Switch to -fsanitize=kcfi
cfi: Drop __CFI_ADDRESSABLE
cfi: Remove CONFIG_CFI_CLANG_SHADOW
...
|
|
Having most of the new files in place, we now enable Rust support
in the build system, including `Kconfig` entries related to Rust,
the Rust configuration printer and a few other bits.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Finn Behrens <me@kloenk.de>
Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Douglas Su <d0u9.su@outlook.com>
Signed-off-by: Douglas Su <d0u9.su@outlook.com>
Co-developed-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl>
Signed-off-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl>
Co-developed-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Co-developed-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Co-developed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Some architectures support the accessed bit in non-leaf PMD entries, e.g.,
x86 sets the accessed bit in a non-leaf PMD entry when using it as part of
linear address translation [1]. Page table walkers that clear the
accessed bit may use this capability to reduce their search space.
Note that:
1. Although an inline function is preferable, this capability is added
as a configuration option for consistency with the existing macros.
2. Due to the little interest in other varieties, this capability was
only tested on Intel and AMD CPUs.
Thanks to the following developers for their efforts [2][3].
Randy Dunlap <rdunlap@infradead.org>
Stephen Rothwell <sfr@canb.auug.org.au>
[1]: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3 (June 2021), section 4.8
[2] https://lore.kernel.org/r/bfdcc7c8-922f-61a9-aa15-7e7250f04af7@infradead.org/
[3] https://lore.kernel.org/r/20220413151513.5a0d7a7e@canb.auug.org.au/
Link: https://lkml.kernel.org/r/20220918080010.2920238-3-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Switch from Clang's original forward-edge control-flow integrity
implementation to -fsanitize=kcfi, which is better suited for the
kernel, as it doesn't require LTO, doesn't use a jump table that
requires altering function references, and won't break cross-module
function address equality.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220908215504.3686827-6-samitolvanen@google.com
|
|
In preparation to switching to -fsanitize=kcfi, remove support for the
CFI module shadow that will no longer be needed.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220908215504.3686827-4-samitolvanen@google.com
|
|
Remove the CONFIG_PREEMPT_RT symbol from the ifdef around
do_softirq_own_stack() and move it to Kconfig instead.
Enable softirq stacks based on SOFTIRQ_ON_OWN_STACK which depends on
HAVE_SOFTIRQ_ON_OWN_STACK and its default value is set to !PREEMPT_RT.
This ensures that softirq stacks are not used on PREEMPT_RT and avoids
a 'select' statement on an option which has a 'depends' statement.
Link: https://lore.kernel.org/YvN5E%2FPrHfUhggr7@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0.
The minimum supported versions of these tools for the build according to
Documentation/process/changes.rst are 5.1 and 11.0.0 respectively.
Remove the feature detection script, Kconfig option, and clean up some
fallback code that is no longer supported.
The removed script was also testing for a GCC specific bug that was
fixed in the 4.7 release.
Also remove workarounds for bpftrace using clang older than 9.0.0, since
other BPF backend fixes are required at this point.
Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/
Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637
Acked-by: Borislav Petkov <bp@suse.de>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offload updates, perhaps most notably a new
RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be
offloaded at boot time, regardless of kernel boot parameters.
This is useful to battery-powered systems such as ChromeOS and
Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot
parameter prevents offloaded callbacks from interfering with
real-time workloads and with energy-efficiency mechanisms
- Polled grace-period updates, perhaps most notably making these APIs
account for both normal and expedited grace periods
- Tasks RCU updates, perhaps most notably reducing the CPU overhead of
RCU tasks trace grace periods by more than a factor of two on a
system with 15,000 tasks.
The reduction is expected to increase with the number of tasks, so it
seems reasonable to hypothesize that a system with 150,000 tasks
might see a 20-fold reduction in CPU overhead
- Torture-test updates
- Updates that merge RCU's dyntick-idle tracking into context tracking,
thus reducing the overhead of transitioning to kernel mode from
either idle or nohz_full userspace execution for kernels that track
context independently of RCU.
This is expected to be helpful primarily for kernels built with
CONFIG_NO_HZ_FULL=y
* tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits)
rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings
rcu: Diagnose extended sync_rcu_do_polled_gp() loops
rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings
rcutorture: Test polled expedited grace-period primitives
rcu: Add polled expedited grace-period primitives
rcutorture: Verify that polled GP API sees synchronous grace periods
rcu: Make Tiny RCU grace periods visible to polled APIs
rcu: Make polled grace-period API account for expedited grace periods
rcu: Switch polled grace-period APIs to ->gp_seq_polled
rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty
rcu/nocb: Add option to opt rcuo kthreads out of RT priority
rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread()
rcu/nocb: Add an option to offload all CPUs on boot
rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call
rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order
rcu/nocb: Add/del rdp to iterate from rcuog itself
rcu/tree: Add comment to describe GP-done condition in fqs loop
rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs()
rcu/kvfree: Remove useless monitor_todo flag
rcu: Cleanup RCU urgency state for offline CPU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Highlights include a major rework of our kPTI page-table rewriting
code (which makes it both more maintainable and considerably faster in
the cases where it is required) as well as significant changes to our
early boot code to reduce the need for data cache maintenance and
greatly simplify the KASLR relocation dance.
Summary:
- Remove unused generic cpuidle support (replaced by PSCI version)
- Fix documentation describing the kernel virtual address space
- Handling of some new CPU errata in Arm implementations
- Rework of our exception table code in preparation for handling
machine checks (i.e. RAS errors) more gracefully
- Switch over to the generic implementation of ioremap()
- Fix lockdep tracking in NMI context
- Instrument our memory barrier macros for KCSAN
- Rework of the kPTI G->nG page-table repainting so that the MMU
remains enabled and the boot time is no longer slowed to a crawl
for systems which require the late remapping
- Enable support for direct swapping of 2MiB transparent huge-pages
on systems without MTE
- Fix handling of MTE tags with allocating new pages with HW KASAN
- Expose the SMIDR register to userspace via sysfs
- Continued rework of the stack unwinder, particularly improving the
behaviour under KASAN
- More repainting of our system register definitions to match the
architectural terminology
- Improvements to the layout of the vDSO objects
- Support for allocating additional bits of HWCAP2 and exposing
FEAT_EBF16 to userspace on CPUs that support it
- Considerable rework and optimisation of our early boot code to
reduce the need for cache maintenance and avoid jumping in and out
of the kernel when handling relocation under KASLR
- Support for disabling SVE and SME support on the kernel
command-line
- Support for the Hisilicon HNS3 PMU
- Miscellanous cleanups, trivial updates and minor fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (136 commits)
arm64: Delay initialisation of cpuinfo_arm64::reg_{zcr,smcr}
arm64: fix KASAN_INLINE
arm64/hwcap: Support FEAT_EBF16
arm64/cpufeature: Store elf_hwcaps as a bitmap rather than unsigned long
arm64/hwcap: Document allocation of upper bits of AT_HWCAP
arm64: enable THP_SWAP for arm64
arm64/mm: use GENMASK_ULL for TTBR_BADDR_MASK_52
arm64: errata: Remove AES hwcap for COMPAT tasks
arm64: numa: Don't check node against MAX_NUMNODES
drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX
perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node()
docs: perf: Include hns3-pmu.rst in toctree to fix 'htmldocs' WARNING
arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"
mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON
mm: kasan: Skip unpoisoning of user pages
mm: kasan: Ensure the tags are visible before the tag in page->flags
drivers/perf: hisi: add driver for HNS3 PMU
drivers/perf: hisi: Add description for HNS3 PMU driver
drivers/perf: riscv_pmu_sbi: perf format
perf/arm-cci: Use the bitmap API to allocate bitmaps
...
|
|
Scattered across the archs are 3 basic forms of tlb_{start,end}_vma().
Provide two new MMU_GATHER_knobs to enumerate them and remove the per
arch tlb_{start,end}_vma() implementations.
- MMU_GATHER_NO_FLUSH_CACHE indicates the arch has flush_cache_range()
but does *NOT* want to call it for each VMA.
- MMU_GATHER_MERGE_VMAS indicates the arch wants to merge the
invalidate across multiple VMAs if possible.
With these it is possible to capture the three forms:
1) empty stubs;
select MMU_GATHER_NO_FLUSH_CACHE and MMU_GATHER_MERGE_VMAS
2) start: flush_cache_range(), end: empty;
select MMU_GATHER_MERGE_VMAS
3) start: flush_cache_range(), end: flush_tlb_range();
default
Obviously, if the architecture does not have flush_cache_range() then
it also doesn't need to select MMU_GATHER_NO_FLUSH_CACHE.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Prepare with moving the NMI extended quiescent states
entrypoints to context tracking. For now those are dumb redirection to
existing RCU calls.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
|
|
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Prepare with moving the IRQ extended quiescent states
entrypoints to context tracking. For now those are dumb redirection to
existing RCU calls.
[ paulmck: Apply Stephen Rothwell feedback from -next. ]
[ paulmck: Apply Nathan Chancellor feedback. ]
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
|
|
Context tracking is going to be used not only to track user transitions
but also idle/IRQs/NMIs. The user tracking part will then become a
separate feature. Prepare Kconfig for that.
[ frederic: Apply Max Filippov feedback. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
|
|
On most architectures, IRQ flag tracing is disabled in NMI context, and
architectures need to define and select TRACE_IRQFLAGS_NMI_SUPPORT in
order to enable this.
Commit:
859d069ee1ddd878 ("lockdep: Prepare for NMI IRQ state tracking")
Permitted IRQ flag tracing in NMI context, allowing lockdep to work in
NMI context where an architecture had suitable entry logic. At the time,
most architectures did not have such suitable entry logic, and this broke
lockdep on such architectures. Thus, this was partially disabled in
commit:
ed00495333ccc80f ("locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs")
... with architectures needing to select TRACE_IRQFLAGS_NMI_SUPPORT to
enable IRQ flag tracing in NMI context.
Currently TRACE_IRQFLAGS_NMI_SUPPORT is defined under
arch/x86/Kconfig.debug. Move it to arch/Kconfig so architectures can
select it without having to provide their own definition.
Since the regular TRACE_IRQFLAGS_SUPPORT is selected by
arch/x86/Kconfig, the select of TRACE_IRQFLAGS_NMI_SUPPORT is moved
there too.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220511131733.4074499-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors
are typically used to read/write from/to memory mapped registers
and can cause hangs or some undefined behaviour in following few
cases,
* If the access to the register space is unclocked, for example: if
there is an access to multimedia(MM) block registers without MM
clocks.
* If the register space is protected and not set to be accessible from
non-secure world, for example: only EL3 (EL: Exception level) access
is allowed and any EL2/EL1 access is forbidden.
* If xPU(memory/register protection units) is controlling access to
certain memory/register space for specific clients.
and more...
Such cases usually results in instant reboot/SErrors/NOC or interconnect
hangs and tracing these register accesses can be very helpful to debug
such issues during initial development stages and also in later stages.
So use ftrace trace events to log such MMIO register accesses which
provides rich feature set such as early enablement of trace events,
filtering capability, dumping ftrace logs on console and many more.
Sample output:
rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700
rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700
rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610
rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610
Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent
escape from non-instrumentable regions
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions
- Mark a few tiny inline as __always_inline to prevent GCC from
bringing them out of line and instrumenting them
- Mark the empty stub context_tracking_enabled() as always inline as
GCC brings them out of line and instruments the empty shell
- Annotate ex_handler_msr_mce() as dead end
* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Annotate ex_handler_msr_mce() as a dead end
context_tracking: Always inline empty stubs
x86: Always inline on_thread_stack() and current_top_of_stack()
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
x86/cpu: Elide KCSAN for cpu_has() and friends
objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later
- Drop support for system call instruction emulation
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.
* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/64: Include cache.h directly in paca.h
powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
powerpc/xics: Include missing header
powerpc/powernv/pci: Drop VF MPS fixup
powerpc/fsl_book3e: Don't set rodata RO too early
powerpc/microwatt: Add mmu bits to device tree
powerpc/powernv/flash: Check OPAL flash calls exist before using
powerpc/powermac: constify device_node in of_irq_parse_oldworld()
powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
powerpc: Enable the DAWR on POWER9 DD2.3 and above
powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
powerpc: Fix all occurences of "the the"
selftests/powerpc/pmu/ebb: remove fixed_instruction.S
powerpc/platforms/83xx: Use of_device_get_match_data()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
powerpc/pseries/vas: Call misc_deregister if sysfs init fails
powerpc/papr_scm: Fix leaking nvdimm_events_map elements
...
|
|
Allow an arch specify that it has objtool uaccess validation with
CONFIG_HAVE_UACCESS_VALIDATION. For now, doing so unconditionally
selects CONFIG_OBJTOOL.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d393d5e2fe73aec6e8e41d5c24f4b6fe8583f2d8.1650384225.git.jpoimboe@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
- It was time to tidy up kernel/module.c and one way of starting with
that effort was to split it up into files. At my request Aaron Tomlin
spearheaded that effort with the goal to not introduce any functional
at all during that endeavour. The penalty for the split is +1322
bytes total, +112 bytes in data, +1210 bytes in text while bss is
unchanged. One of the benefits of this other than helping make the
code easier to read and review is summoning more help on review for
changes with livepatching so kernel/module/livepatch.c is now pegged
as maintained by the live patching folks.
The before and after with just the move on a defconfig on x86-64:
$ size kernel/module.o
text data bss dec hex filename
38434 4540 104 43078 a846 kernel/module.o
$ size -t kernel/module/*.o
text data bss dec hex filename
4785 120 0 4905 1329 kernel/module/kallsyms.o
28577 4416 104 33097 8149 kernel/module/main.o
1158 8 0 1166 48e kernel/module/procfs.o
902 108 0 1010 3f2 kernel/module/strict_rwx.o
3390 0 0 3390 d3e kernel/module/sysfs.o
832 0 0 832 340 kernel/module/tree_lookup.o
39644 4652 104 44400 ad70 (TOTALS)
- Aaron added module unload taint tracking (MODULE_UNLOAD_TAINT_TRACKING),
to enable tracking unloaded modules which did taint the kernel.
- Christophe Leroy added CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
which lets architectures to request having modules data in vmalloc
area instead of module area. There are three reasons why an
architecture might want this:
a) On some architectures (like book3s/32) it is not possible to
protect against execution on a page basis. The exec stuff can be
mapped by different arch segment sizes (on book3s/32 that is 256M
segments). By default the module area is in an Exec segment while
vmalloc area is in a NoExec segment. Using vmalloc lets you muck
with module data as NoExec on those architectures whereas before
you could not.
b) By pushing more module data to vmalloc you also increase the
probability of module text to remain within a closer distance
from kernel core text and this reduces trampolines, this has been
reported on arm first and powerpc folks are following that lead.
c) Free'ing module_alloc() (Exec by default) area leaves this
exposed as Exec by default, some architectures have some security
enhancements to set this as NoExec on free, and splitting module
data with text let's future generic special allocators be added
to the kernel without having developers try to grok the tribal
knowledge per arch. Work like Rick Edgecombe's permission vmalloc
interface [0] becomes easier to address over time.
[0] https://lore.kernel.org/lkml/20201120202426.18009-1-rick.p.edgecombe@intel.com/#r
- Masahiro Yamada's symbol search enhancements
* tag 'modules-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (33 commits)
module: merge check_exported_symbol() into find_exported_symbol_in_section()
module: do not binary-search in __ksymtab_gpl if fsa->gplok is false
module: do not pass opaque pointer for symbol search
module: show disallowed symbol name for inherit_taint()
module: fix [e_shstrndx].sh_size=0 OOB access
module: Introduce module unload taint tracking
module: Move module_assert_mutex_or_preempt() to internal.h
module: Make module_flags_taint() accept a module's taints bitmap and usable outside core code
module.h: simplify MODULE_IMPORT_NS
powerpc: Select ARCH_WANTS_MODULES_DATA_IN_VMALLOC on book3s/32 and 8xx
module: Remove module_addr_min and module_addr_max
module: Add CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
module: Introduce data_layout
module: Prepare for handling several RB trees
module: Always have struct mod_tree_root
module: Rename debug_align() as strict_align()
module: Rework layout alignment to avoid BUG_ON()s
module: Move module_enable_x() and frob_text() in strict_rwx.c
module: Make module_enable_x() independent of CONFIG_ARCH_HAS_STRICT_MODULE_RWX
module: Move version support into a separate file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- usercopy hardening expanded to check other allocation types (Matthew
Wilcox, Yuanzheng Song)
- arm64 stackleak behavioral improvements (Mark Rutland)
- arm64 CFI code gen improvement (Sami Tolvanen)
- LoadPin LSM block dev API adjustment (Christoph Hellwig)
- Clang randstruct support (Bill Wendling, Kees Cook)
* tag 'kernel-hardening-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (34 commits)
loadpin: stop using bdevname
mm: usercopy: move the virt_addr_valid() below the is_vmalloc_addr()
gcc-plugins: randstruct: Remove cast exception handling
af_unix: Silence randstruct GCC plugin warning
niu: Silence randstruct warnings
big_keys: Use struct for internal payload
gcc-plugins: Change all version strings match kernel
randomize_kstack: Improve docs on requirements/rationale
lkdtm/stackleak: fix CONFIG_GCC_PLUGIN_STACKLEAK=n
arm64: entry: use stackleak_erase_on_task_stack()
stackleak: add on/off stack variants
lkdtm/stackleak: check stack boundaries
lkdtm/stackleak: prevent unexpected stack usage
lkdtm/stackleak: rework boundary management
lkdtm/stackleak: avoid spurious failure
stackleak: rework poison scanning
stackleak: rework stack high bound handling
stackleak: clarify variable names
stackleak: rework stack low bound handling
stackleak: remove redundant check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Comprehensive interface overhaul:
=================================
Objtool's interface has some issues:
- Several features are done unconditionally, without any way to
turn them off. Some of them might be surprising. This makes
objtool tricky to use, and prevents porting individual features
to other arches.
- The config dependencies are too coarse-grained. Objtool
enablement is tied to CONFIG_STACK_VALIDATION, but it has several
other features independent of that.
- The objtool subcmds ("check" and "orc") are clumsy: "check" is
really a subset of "orc", so it has all the same options.
The subcmd model has never really worked for objtool, as it only
has a single purpose: "do some combination of things on an object
file".
- The '--lto' and '--vmlinux' options are nonsensical and have
surprising behavior.
Overhaul the interface:
- get rid of subcmds
- make all features individually selectable
- remove and/or clarify confusing/obsolete options
- update the documentation
- fix some bugs found along the way
- Fix x32 regression
- Fix Kbuild cleanup bugs
- Add scripts/objdump-func helper script to disassemble a single
function from an object file.
- Rewrite scripts/faddr2line to be section-aware, by basing it on
'readelf', moving it away from 'nm', which doesn't handle multiple
sections well, which can result in decoding failure.
- Rewrite & fix symbol handling - which had a number of bugs wrt.
object files that don't have global symbols - which is rare but
possible. Also fix a bunch of symbol handling bugs found along the
way.
* tag 'objtool-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
objtool: Fix objtool regression on x32 systems
objtool: Fix symbol creation
scripts/faddr2line: Fix overlapping text section failures
scripts: Create objdump-func helper script
objtool: Remove libsubcmd.a when make clean
objtool: Remove inat-tables.c when make clean
objtool: Update documentation
objtool: Remove --lto and --vmlinux in favor of --link
objtool: Add HAVE_NOINSTR_VALIDATION
objtool: Rename "VMLINUX_VALIDATION" -> "NOINSTR_VALIDATION"
objtool: Make noinstr hacks optional
objtool: Make jump label hack optional
objtool: Make static call annotation optional
objtool: Make stack validation frame-pointer-specific
objtool: Add CONFIG_OBJTOOL
objtool: Extricate sls from stack validation
objtool: Rework ibt and extricate from stack validation
objtool: Make stack validation optional
objtool: Add option to print section addresses
objtool: Don't print parentheses in function addresses
...
|
