| Age | Commit message (Collapse) | Author |
|---|
|
Since commit 488dac0c9237 ("libfs: fix error cast of negative value in
simple_attr_write()"), the EINJ debugfs interface no longer accepts
negative values as input. Attempt to do so will result in EINVAL.
Fixes: 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()")
Signed-off-by: Qifu Zhang <zhangqifu@bytedance.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The existing references to DSD are stale and outdated. The new process
and guidance is maintained @https://github.com/UEFI/DSD-Guide
Update the existing documents to reflect the same.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.19-rc1.
Lots of tiny cleanups in here, the major stuff is:
- termbit cleanups and unification by Ilpo. A much needed change that
goes a long way to making things simpler for all of the different
arches
- tty documentation cleanups and movements to their own place in the
documentation tree
- old tty driver cleanups and fixes from Jiri to bring some existing
drivers into the modern world
- RS485 cleanups and unifications to make it easier for individual
drivers to support this mode instead of having to duplicate logic
in each driver
- Lots of 8250 driver updates and additions
- new device id additions
- n_gsm continued fixes and cleanups
- other minor serial driver updates and cleanups
All of these have been in linux-next for weeks with no reported issues"
* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
tty: Rework receive flow control char logic
pcmcia: synclink_cs: Don't allow CS5-6
serial: stm32-usart: Correct CSIZE, bits, and parity
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
serial: sifive: Sanitize CSIZE and c_iflag
serial: sh-sci: Don't allow CS5-6
serial: txx9: Don't allow CS5-6
serial: rda-uart: Don't allow CS5-6
serial: digicolor-usart: Don't allow CS5-6
serial: uartlite: Fix BRKINT clearing
serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
serial: msm_serial: disable interrupts in __msm_console_write()
serial: meson: acquire port->lock in startup()
serial: 8250_dw: Use dev_err_probe()
serial: 8250_dw: Use devm_add_action_or_reset()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"cros_ec:
- Fix wrong error handling path
- Clean-up patches
cros_ec_chardev:
- Re-introduce cros_ec_cmd_xfer to fix ABI broken
cros_ec_lpcs:
- Support the Framework Laptop
cros_ec_typec:
- Fix NULL dereference
chromeos_acpi:
- Add ChromeOS ACPI device driver
- Fix Sphinx errors when `make htmldocs`
misc:
- Drop BUG_ON()s"
* tag 'tag-chrome-platform-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Use imperative mood for ChromeOS ACPI sysfs ABI descriptions
platform/chrome: Use tables for values lists of ChromeOS ACPI sysfs ABI
platform/chrome: cros_ec_spi: drop BUG_ON() if `din` isn't large enough
platform/chrome: cros_ec_spi: drop unneeded BUG_ON()
platform/chrome: cros_ec_i2c: drop BUG_ON() in cros_ec_pkt_xfer_i2c()
platform/chrome: cros_ec_proto: drop BUG_ON() in cros_ec_get_host_event()
platform/chrome: cros_ec_proto: drop BUG_ON() in cros_ec_prepare_tx()
platform/chrome: correct cros_ec_prepare_tx() usage
platform/chrome: cros_ec_proto: drop unneeded BUG_ON() in prepare_packet()
platform/chrome: Add ChromeOS ACPI device driver
platform/chrome: cros_ec_typec: Check for EC driver
platform/chrome: cros_ec_lpcs: reserve the MEC LPC I/O ports first
platform/chrome: cros_ec_lpcs: detect the Framework Laptop
platform/chrome: Re-introduce cros_ec_cmd_xfer and use it for ioctls
platform/chrome: cros_ec: append newline to all logs
platform/chrome: cros_ec: sort header inclusion alphabetically
platform/chrome: cros_ec: determine `wake_enabled` in cros_ec_suspend()
platform/chrome: cros_ec: remove unused variable `was_wake_device`
platform/chrome: cros_ec: fix error handling in cros_ec_register()
|
|
The x86 Chromebooks have the ChromeOS ACPI device. This driver attaches
to the ChromeOS ACPI device and exports the values reported by ACPI in a
sysfs directory. This data isn't present in ACPI tables when read
through ACPI tools, hence a driver is needed to do it. The driver gets
data from firmware using the ACPI component of the kernel. The ACPI values
are presented in string form (numbers as decimal values) or binary
blobs, and can be accessed as the contents of the appropriate read only
files in the standard ACPI device's sysfs directory tree. This data is
consumed by the ChromeOS user space.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Yn4OKYrtV35Dv+nd@debian-BULLSEYE-live-builder-AMD64
|
|
Document RS485 related properties returned from ACPI _DSD as device
properties.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220426122448.38997-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Unify Package () representation for properties:
- make them one line where it's possible
- add spaces between parentheses and curly braces
- drop the explicit size of package
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- tracepoints when Linux acts as an I2C client
- added support for AMD PSP
- whole subsystem now uses generic_handle_irq_safe()
- piix4 driver gained MMIO access enabling so far missed controllers
with AMD chipsets
- a bulk of device driver updates, refactorization, and fixes.
* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (61 commits)
i2c: mux: demux-pinctrl: do not deactivate a master that is not active
i2c: meson: Fix wrong speed use from probe
i2c: add tracepoints for I2C slave events
i2c: designware: Remove code duplication
i2c: cros-ec-tunnel: Fix syntax errors in comments
MAINTAINERS: adjust XLP9XX I2C DRIVER after removing the devicetree binding
i2c: designware: Mark dw_i2c_plat_{suspend,resume}() as __maybe_unused
i2c: mediatek: Add i2c compatible for Mediatek MT8168
dt-bindings: i2c: update bindings for MT8168 SoC
i2c: mt65xx: Simplify with clk-bulk
i2c: i801: Drop two outdated comments
i2c: xiic: Make bus names unique
i2c: i801: Add support for the Process Call command
i2c: i801: Drop useless masking in i801_access
i2c: tegra: Add SMBus block read function
i2c: designware: Use the i2c_mark_adapter_suspended/resumed() helpers
i2c: designware: Lock the adapter while setting the suspended flag
i2c: mediatek: remove redundant null check
i2c: mediatek: modify bus speed calculation formula
i2c: designware: Fix improper usage of readl
...
|
|
GPIO examples of ASL in the board.rst, enumeration.rst and gpio-properties.rst
are not unified. Unify them for better reader experience.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Unify Package () representation for properties:
- make them one line where it's possible
- add spaces between parentheses and curly braces
- drop the explicit size of package
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Drop comma for terminator entry to avoid copy'n'paste of this pattern.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ifdeffery around ACPI ID tables are ugly and in some cases
even less valuable than plain definitions. Drop them for good
to avoid spreading rather bad pattern.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Drop blank line and add a closing curly brace to make ASL example closer
to the reality.
Fixes: ef3d13b86763 ("docs: firmware-guide: ACPI: Add a PWM example")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The owner member of the struct i2c_driver is assigned by a corresponding macro.
No need to assign it explicitly.
Fixes: 59c3987805a9 ("ACPI: add documentation about ACPI 5 enumeration")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In some cases UART serial bus resource may be represented by struct
serdev_device.
Fixes: 53c7626356c7 ("serdev: Add ACPI support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since we have _DSD established and specified (ACPI v5.1+) there is no
need to use custom _DSM methods. Rewrite documentation to use _DSD.
Fixes: f60e7074902a ("misc: at25: Make use of device property API")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a detailed example of the named interrupts in the ACPI table.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These update the handling of software nodes and graph properties, and
the MAINTAINERS entry for the former.
Specifics:
- Remove device_add_properties() which does not work correctly if
software nodes holding additional device properties are shared or
reused (Heikki Krogerus).
- Fix nargs_prop property handling for software nodes (Clément
Léger).
- Update documentation of ACPI device properties (Sakari Ailus).
- Update the handling of graph properties in the generic framework to
match the DT case (Sakari Ailus).
- Update software nodes entry in MAINTAINERS (Andy Shevchenko)"
* tag 'devprop-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
software node: Update MAINTAINERS data base
software node: fix wrong node passed to find nargs_prop
device property: Drop fwnode_graph_get_remote_node()
device property: Use fwnode_graph_for_each_endpoint() macro
device property: Implement fwnode_graph_get_endpoint_count()
Documentation: ACPI: Update references
Documentation: ACPI: Fix data node reference documentation
device property: Fix documentation for FWNODE_GRAPH_DEVICE_DISABLED
device property: Fix fwnode_graph_devcon_match() fwnode leak
device property: Remove device_add_properties() API
driver core: Don't call device_remove_properties() from device_del()
PCI: Convert to device_create_managed_software_node()
|
|
Update references for the ACPI _DSD documentation. In particular:
- Substitute _DSD property and hierarchical data extension documents with
the newer DSD guide that replaces both, and use its HTML form.
- Refer to the latest ACPI spec.
- Add data node reference documentation reference to graph documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The data node reference documentation was missing a package that must
contain the property values, instead property name and multiple values
being present in a single package. This is not aligned with the _DSD
spec.
Fix it by adding the package for the values.
Also add the missing "reg" properties to two numbered nodes.
Fixes: b10134a3643d ("ACPI: property: Document hierarchical data extension references")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
SGX reserved memory does not appear in the standard address maps.
Add hook to call into the SGX code to check if an address is located
in SGX memory.
There are other challenges in injecting errors into SGX. Update the
documentation with a sequence of operations to inject.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20211026220050.697075-7-tony.luck@intel.com
|
|
The original patch adding the example used _DSC Name when Method was
intended. Fix this.
Also replace spaces used for indentation with tabs in the example.
Fixes: ed66f12ba4b1 ("Documentation: ACPI: Document _DSC object usage for enum power state")
Reported-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Document the use of the _DSC object for setting desirable power state
during probe.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is a spelling mistake in the documentation with the Windows
Millennium edition. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.
Replace the occurences of the following characters:
- U+00a0 (' '): NO-BREAK SPACE
as it can cause lines being truncated on PDF output
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/a65b04a5cf341cff02d4b514dd4889b4fa4f94b8.1626947264.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains mostly various fixes, cleanups and some conversions to
the atomic API. One noteworthy change is that PWM consumers can now
pass a hint to the PWM core about the PWM usage, enabling PWM
providers to implement various optimizations.
There's also a fair bit of simplification here with the addition of
some device-managed helpers as well as unification between the DT and
ACPI firmware interfaces"
* tag 'pwm/for-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (50 commits)
pwm: Remove redundant assignment to pointer pwm
pwm: ep93xx: Fix read of uninitialized variable ret
pwm: ep93xx: Prepare clock before using it
pwm: ep93xx: Unfold legacy callbacks into ep93xx_pwm_apply()
pwm: ep93xx: Implement .apply callback
pwm: vt8500: Only unprepare the clock after the pwmchip was removed
pwm: vt8500: Drop if with an always false condition
pwm: tegra: Assert reset only after the PWM was unregistered
pwm: tegra: Don't needlessly enable and disable the clock in .remove()
pwm: tegra: Don't modify HW state in .remove callback
pwm: tegra: Drop an if block with an always false condition
pwm: core: Simplify some devm_*pwm*() functions
pwm: core: Remove unused devm_pwm_put()
pwm: core: Unify fwnode checks in the module
pwm: core: Reuse fwnode_to_pwmchip() in ACPI case
pwm: core: Convert to use fwnode for matching
docs: firmware-guide: ACPI: Add a PWM example
dt-bindings: pwm: pwm-tiecap: Add compatible string for AM64 SoC
dt-bindings: pwm: pwm-tiecap: Convert to json schema
pwm: sprd: Don't check the return code of pwmchip_remove()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
|
|
When PWM support for ACPI has been added into the kernel, it missed
the documentation update. Hence update documentation here.
Fixes: 4a6ef8e37c4d ("pwm: Add support referencing PWMs from ACPI")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Document additional MAC configuration modes which can be processed
by the existing fwnode_ phylink helpers:
* "managed" standard ACPI _DSD property [1]
* "fixed-link" data-only subnode linked in the _DSD package via
generic mechanism of the hierarchical data extension [2]
[1] https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
[2] https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.pdf
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the '.. code-block:: none' to properly highlight the documented DSDT
entries. This also fixes warnings in the documentation build process.
Fixes: e71305acd81c ("Documentation: ACPI: DSD: Document MDIO PHY")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Include the new phy.rst into the index of the ACPI support
documentation.
Fixes: e71305acd81c ("Documentation: ACPI: DSD: Document MDIO PHY")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/7162043c18f1ea96c446b332400e44e8087ba142.1623824363.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Introduce a mechanism based on generic ACPI _DSD device properties
definition [1] to get PHYs registered on a MDIO bus and provide them to
be connected to MAC.
[1] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
Describe properties "phy-handle" and "phy-mode".
Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Historically ACPI has no means of the GPIO polarity and thus
the SPISerialBus() resource defines it on the per-chip basis.
In order to avoid an ambiguity, the GPIO polarity is considered
being always Active High.
Add note about this to the respective documentation file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Drop the definitions of the following symbols:
ACPI_SBS_COMPONENT
ACPI_FAN_COMPONENT
ACPI_CONTAINER_COMPONENT
ACPI_MEMORY_DEVICE_COMPONENT
that are not used in a meaningful way any more and update the ACPI
debug documentation to avoid confusing users by making the impression
that the ACPICA debug can be used for anything other than ACPICA
itself, which is incorrect.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
|
|
Replace the only ACPI_EXCEPTION() instance in sysfs.c with a
pr_warn() call, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more and drop the
ACPI_SYSTEM_COMPONENT definition that would not be used any
more in a meaningful way after the above changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
|
|
Merge the ACPI PCI topic branch depended on by the following material.
|
|
The ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() macros are used for
message printing in the ACPICA code and they should not be used
elsewhere. Special configuration (either kernel command line or
sysfs-based) is needed to see the messages printed by them and
the format of those messages is also special and convoluted.
For this reason, replace all of the ACPI_DEBUG_PRINT() and
ACPI_EXCEPTION() instances in the ACPI processor driver with
corresponding dev_*(), acpi_handle_*() and pr_*() calls depending
on the context in which they appear.
Also drop the ACPI_PROCESSOR_COMPONENT definition that is not going
to be necessary any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
|
|
After dropping all of the code using ACPI_PCI_COMPONENT drop the
definition of it too and update the documentation to remove all
ACPI_PCI_COMPONENT references from it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
|
|
* acpi-messages:
ACPI: OSL: Clean up printing messages
ACPI: OSL: Rework acpi_check_resource_conflict()
ACPI: thermal: Clean up printing messages
ACPI: video: Clean up printing messages
ACPI: button: Clean up printing messages
ACPI: battery: Clean up printing messages
ACPI: AC: Clean up printing messages
ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more
ACPI: utils: Clean up printing messages
ACPI: scan: Clean up printing messages
ACPI: bus: Clean up printing messages
ACPI: PM: Clean up printing messages
ACPI: power: Clean up printing messages
|
|
Replace the ACPI_DEBUG_PRINT() instances in thermal.c with
acpi_handle_debug() calls and modify the ACPI_THERMAL_TRIPS_EXCEPTION()
macro in there to use acpi_handle_info() internally, which among other
things causes the excessive log level of the messages printed by it to
be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more from thermal.c, drop the no longer needed
ACPI_THERMAL_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, add a pr_fmt() definition to thermal.c, drop the PREFIX
definition from there and replace some pr_warn() calls with pr_info()
or acpi_handle_info() to reduce the excessive log level and (in the
latter case) facilitate easier identification of the message source.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace the ACPI_DEBUG_PRINT() instances in acpi_video.c with
acpi_handle_debug() calls and the ACPI_EXCEPTION()/ACPI_ERROR()/
ACPI_WARNING() instances in there with acpi_handle_info() calls,
which among other things causes the excessive log levels of those
messages to be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more from acpi_video.c, drop the no longer needed
ACPI_VIDEO_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, add a pr_fmt() definition to acpi_video.c, replace the
direct printk() invocations in there with acpi_handle_info() or
pr_info() (and reduce the excessive log level where applicable) and
drop the PREFIX sybmbol definition which is not necessary any more
from acpi_video.c.
Also make unrelated janitorial changes to fix up white space and
use ACPI_FAILURE() instead of negating ACPI_SUCCESS().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace the ACPI_DEBUG_PRINT() instance in button.c with an
acpi_handle_debug() call, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more, drop the no longer needed
ACPI_BUTTON_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, replace the direct printk() invocations with pr_info()
(that changes the excessive log level for some of them too) and drop
the unneeded PREFIX sybmbol definition from battery.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in battery.c with acpi_handle_debug() and acpi_handle_info() calls,
respectively, which among other things causes the excessive log
level of the messages previously printed via ACPI_EXCEPTION() to
be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more, drop the no longer needed ACPI_BATTERY_COMPONENT
definition from the headers and update the documentation accordingly.
While at it, update the pr_fmt() definition and drop the unneeded
PREFIX sybmbol definition from battery.c. Also adapt the existing
pr_info() calls to the new pr_fmt() definition.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in ac.c with acpi_handle_debug() and acpi_handle_info() calls,
respectively, which among other things causes the excessive log
level of the messages previously printed via ACPI_EXCEPTION() to
be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more, drop the no longer needed ACPI_AC_COMPONENT definition
from the headers and update the documentation accordingly.
While at it, replace the direct printk() invocation with pr_info(),
add a pr_fmt() definition to ac.c and drop the unneeded PREFIX
symbol definition from there.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
After dropping all of the code using ACPI_BUS_COMPONENT drop it
too and modify the example in the documentation using it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace the remaining ACPI_DEBUG_PRINT() instances in device_pm.c
with dev_dbg() invocations, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more, and drop the no longer needed
ACPI_POWER_COMPONENT definition from the headers and documentation.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The gpio-line-names lists must respect some rules.
This patch adds a new rule in documentation, to avoid
the use of duplicate names in the same gpiochip.
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix the error type value for PCI Express uncorrectable non-fatal
error to 0x00000080 and fix the error type value for PCI Express
uncorrectable fatal error to 0x00000100.
See Advanced Configuration and Power Interface Specification,
version 6.2, table "18-409 Error Type Definition".
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reported-by: Lijian Zhao <lijian.zhao@intel.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For "fixed" PCI devices, such as chips directly soldered
on the main board (ethernet, Wi-Fi, serial ports, etc.),
it is possible to find an ACPI enumeration.
This allows to add useful properties to these devices.
Just for an example: the property "gpio-line-names" can be
added to the pins of a GPIO expander on the PCI bus.
In order to find the ACPI name of a PCI device, it's necessary
to disassemble the BIOS ACPI tables (in particular the DSDT)
and also to analyze the PCI bus topology of the board.
This patch, with a practical example, show how to do this.
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
