| Age | Commit message (Collapse) | Author |
|---|
|
Pull networking fixes from David Miller:
"It looks like a decent sized set of fixes, but a lot of these are one
liner off-by-one and similar type changes:
1) Fix netlink header pointer to calcular bad attribute offset
reported to user. From Pablo Neira Ayuso.
2) Don't double clear PHY interrupts when ->did_interrupt is set,
from Heiner Kallweit.
3) Add missing validation of various (devlink, nl802154, fib, etc.)
attributes, from Jakub Kicinski.
4) Missing *pos increments in various netfilter seq_next ops, from
Vasily Averin.
5) Missing break in of_mdiobus_register() loop, from Dajun Jin.
6) Don't double bump tx_dropped in veth driver, from Jiang Lidong.
7) Work around FMAN erratum A050385, from Madalin Bucur.
8) Make sure ARP header is pulled early enough in bonding driver,
from Eric Dumazet.
9) Do a cond_resched() during multicast processing of ipvlan and
macvlan, from Mahesh Bandewar.
10) Don't attach cgroups to unrelated sockets when in interrupt
context, from Shakeel Butt.
11) Fix tpacket ring state management when encountering unknown GSO
types. From Willem de Bruijn.
12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend()
only in the suspend context. From Heiner Kallweit"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
net: systemport: fix index check to avoid an array out of bounds access
tc-testing: add ETS scheduler to tdc build configuration
net: phy: fix MDIO bus PM PHY resuming
net: hns3: clear port base VLAN when unload PF
net: hns3: fix RMW issue for VLAN filter switch
net: hns3: fix VF VLAN table entries inconsistent issue
net: hns3: fix "tc qdisc del" failed issue
taprio: Fix sending packets without dequeueing them
net: mvmdio: avoid error message for optional IRQ
net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register
net: memcg: fix lockdep splat in inet_csk_accept()
s390/qeth: implement smarter resizing of the RX buffer pool
s390/qeth: refactor buffer pool code
s390/qeth: use page pointers to manage RX buffer pool
seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
net/packet: tpacket_rcv: do not increment ring index on drop
sxgbe: Fix off by one in samsung driver strncpy size arg
net: caif: Add lockdep expression to RCU traversal primitive
MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"We've been accruing these for a couple of weeks, so the batch is a bit
bigger than usual.
Largest delta is due to a led-bl driver that is added -- there was a
miscommunication before the merge window and the driver didn't make it
in. Due to this, the platforms needing it regressed. At this point, it
seemed easier to add the new driver than unwind the changes.
Besides that, there are a handful of various fixes:
- AMD tee memory leak fix
- A handful of fixlets for i.MX SCU communication
- A few maintainers woke up and realized DEBUG_FS had been missing
for a while, so a few updates of that.
... and the usual collection of smaller fixes to various platforms"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits)
ARM: socfpga_defconfig: Add back DEBUG_FS
arm64: dts: socfpga: agilex: Fix gmac compatible
ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS
arm64: dts: meson: fix gxm-khadas-vim2 wifi
arm64: dts: meson-sm1-sei610: add missing interrupt-names
ARM: meson: Drop unneeded select of COMMON_CLK
ARM: dts: bcm2711: Add pcie0 alias
ARM: dts: bcm283x: Add missing properties to the PWR LED
tee: amdtee: fix memory leak in amdtee_open_session()
ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set
arm: dts: dra76x: Fix mmc3 max-frequency
ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
bus: ti-sysc: Fix 1-wire reset quirk
ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value
soc: imx-scu: Align imx sc msg structs to 4
firmware: imx: Align imx_sc_msg_req_cpu_start to 4
firmware: imx: scu-pd: Align imx sc msg structs to 4
firmware: imx: misc: Align imx sc msg structs to 4
firmware: imx: scu: Ensure sequential TX
ARM: dts: imx7-colibri: Fix frequency for sd/mmc
...
|
|
FMAN DMA read or writes under heavy traffic load may cause FMAN
internal resource leak; thus stopping further packet processing.
The FMAN internal queue can overflow when FMAN splits single
read or write transactions into multiple smaller transactions
such that more than 17 AXI transactions are in flight from FMAN
to interconnect. When the FMAN internal queue overflows, it can
stall further packet processing. The issue can occur with any one
of the following three conditions:
1. FMAN AXI transaction crosses 4K address boundary (Errata
A010022)
2. FMAN DMA address for an AXI transaction is not 16 byte
aligned, i.e. the last 4 bits of an address are non-zero
3. Scatter Gather (SG) frames have more than one SG buffer in
the SG list and any one of the buffers, except the last
buffer in the SG list has data size that is not a multiple
of 16 bytes, i.e., other than 16, 32, 48, 64, etc.
With any one of the above three conditions present, there is
likelihood of stalled FMAN packet processing, especially under
stress with multiple ports injecting line-rate traffic.
To avoid situations that stall FMAN packet processing, all of the
above three conditions must be avoided; therefore, configure the
system with the following rules:
1. Frame buffers must not span a 4KB address boundary, unless
the frame start address is 256 byte aligned
2. All FMAN DMA start addresses (for example, BMAN buffer
address, FD[address] + FD[offset]) are 16B aligned
3. SG table and buffer addresses are 16B aligned and the size
of SG buffers are multiple of 16 bytes, except for the last
SG buffer that can be of any size.
Additional workaround notes:
- Address alignment of 64 bytes is recommended for maximally
efficient system bus transactions (although 16 byte alignment is
sufficient to avoid the stall condition)
- To support frame sizes that are larger than 4K bytes, there are
two options:
1. Large single buffer frames that span a 4KB page boundary can
be converted into SG frames to avoid transaction splits at
the 4KB boundary,
2. Align the large single buffer to 256B address boundaries,
ensure that the frame address plus offset is 256B aligned.
- If software generated SG frames have buffers that are unaligned
and with random non-multiple of 16 byte lengths, before
transmitting such frames via FMAN, frames will need to be copied
into a new single buffer or multiple buffer SG frame that is
compliant with the three rules listed above.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Another batch of DT fixes. I think this should be the last of it, but
sending pull requests seems to cause people to send more fixes.
Summary:
- Fixes for warnings introduced by hierarchical PSCI binding changes
- Fixes for broken doc references due to DT schema conversions
- Several grammar and typo fixes
- Fix a bunch of dtc warnings in examples"
* tag 'devicetree-fixes-for-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: arm: Fixup the DT bindings for hierarchical PSCI states
dt-bindings: power: Extend nodename pattern for power-domain providers
MAINTAINERS: update ALLWINNER CPUFREQ DRIVER entry
dt-bindings: bus: Drop empty compatible string in example
dt-bindings: power: Convert domain-idle-states bindings to json-schema
dt-bindings: arm: Fix cpu compatibles in the hierarchical example for PSCI
dt-bindings: arm: Correct links to idle states definitions
dt-bindings: mfd: Fix typo in file name of twl-familly.txt
dt-bindings: mfd: tps65910: Improve grammar
dt-bindings: mfd: zii,rave-sp: Fix a typo ("onborad")
dt-bindings: arm: fsl: fix APF6Dev compatible
dt-bindings: Fix dtc warnings in examples
docs: dt: fix several broken doc references
docs: dt: fix several broken references due to renames
MAINTAINERS: clean up PCIE DRIVER FOR CAVIUM THUNDERX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes, one for a minor issue in the stm32-vrefbuf
driver and a documentation fix in the Qualcomm code"
* tag 'regulator-fix-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: stm32-vrefbuf: fix a possible overshoot when re-enabling
regulator: qcom_spmi: Fix docs for PM8004
|
|
The hierarchical topology with power-domain should be described through
child nodes, rather than as currently described in the PSCI root node. Fix
this by adding a patternProperties with a corresponding reference to the
power-domain DT binding.
Additionally, update the example to conform to the new pattern, but also to
the adjusted domain-idle-state DT binding.
Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[robh: Add missing allOf, tweak power-domain node name]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The existing binding requires the nodename to have a '@', which is a bit
limiting for the wider use case. Therefore, let's extend the pattern to
allow either '@' or '-'.
Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[robh: drop example change]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
In preparation to add generic checks of compatible strings, drop
the compatible as '...' is not a valid compatible string.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
While converting to the json-schema, let's also take the opportunity to
further specify/clarify some more details about the DT binding.
For example, let's define the label where to put the states nodes, set a
pattern for nodename of the state nodes and finally add an example.
Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[robh: drop type refs from standard unit properties]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The arm,idle-state DT bindings recently got converted to the json-schema,
but some links are still pointing to the old, non-existing, txt file. Let's
update the links to fix this.
Fixes: baac82fe06db ("dt-bindings: arm: Convert arm,idle-state binding to DT schema")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
arm64: dts: agilex: fix gmac compatible
- The compatible for Agilex GMAC should be "altr,socfpga-stmmac-a10-s10"
* tag 'socfpga_dts_fix_for_v5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (578 commits)
arm64: dts: socfpga: agilex: Fix gmac compatible
Linux 5.6-rc4
KVM: VMX: check descriptor table exits on instruction emulation
ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
macintosh: therm_windtunnel: fix regression when instantiating devices
jbd2: fix data races at struct journal_head
kvm: x86: Limit the number of "kvm: disabled by bios" messages
KVM: x86: avoid useless copy of cpufreq policy
KVM: allow disabling -Werror
KVM: x86: allow compiling as non-module with W=1
KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis
KVM: Introduce pv check helpers
KVM: let declaration of kvm_get_running_vcpus match implementation
KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter
MAINTAINERS: Correct Cadence PCI driver path
io_uring: fix 32-bit compatability with sendmsg/recvmsg
net: dsa: mv88e6xxx: Fix masking of egress port
mlxsw: pci: Wait longer before accessing the device after reset
sfc: fix timestamp reconstruction at 16-bit rollover points
vsock: fix potential deadlock in transport->release()
...
Link: https://lore.kernel.org/r/20200303153509.28248-1-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
APF6 Dev compatible is armadeus,imx6dl-apf6dev and not
armadeus,imx6dl-apf6dldev.
Fixes: 3d735471d066 ("dt-bindings: arm: Document Armadeus SoM and Dev boards devicetree binding")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Fix all the warnings in the DT binding schema examples when built with
'W=1'. This is in preparation to make that the default for examples.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Fix AMDTEE memory leak in amdtee_open_session()
* tag 'tee-amdtee-fix-for-5.6' of https://git.linaro.org/people/jens.wiklander/linux-tee: (344 commits)
tee: amdtee: fix memory leak in amdtee_open_session()
Linux 5.6-rc2
ext4: improve explanation of a mount failure caused by a misconfigured kernel
Input: cyapa - replace zero-length array with flexible-array member
Input: tca6416-keypad - replace zero-length array with flexible-array member
Input: gpio_keys_polled - replace zero-length array with flexible-array member
IB/mlx5: Use div64_u64 for num_var_hw_entries calculation
nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info
nvme/pci: move cqe check after device shutdown
nvme: prevent warning triggered by nvme_stop_keep_alive
nvme/tcp: fix bug on double requeue when send fails
cifs: make sure we do not overflow the max EA buffer size
cifs: enable change notification for SMB2.1 dialect
netdevice.h: fix all kernel-doc and Sphinx warnings
net: dsa: tag_ar9331: Make sure there is headroom for tag
net: dsa: tag_qca: Make sure there is headroom for tag
net, ip6_tunnel: enhance tunnel locate with link check
net/smc: no peer ID in CLC decline for SMCD
net/smc: transfer fasync_list in case of fallback
net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()
...
Link: https://lore.kernel.org/r/20200227165205.GA7926@jade
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
There are several DT doc references that require manual fixes.
I found 3 cases fixed on this patch:
- directory named "binding/" instead of "bindings/";
- .txt to .yaml renames;
- file renames (still on txt format);
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Several DT references got broken due to txt->yaml conversion.
Those are auto-fixed by running:
scripts/documentation-file-ref-check --fix
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes deom Rob Herring:
"A handful of fixes in DT bindings for MDIO bus, Allwinner CSI, OMAP
HSMMC, and Tegra124 EMC"
* tag 'devicetree-fixes-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: media: csi: Fix clocks description
dt-bindings: media: csi: Add interconnects properties
dt-bindings: net: mdio: remove compatible string from example
dt-bindings: memory-controller: Update example for Tegra124 EMC
dt-bindings: mmc: omap-hsmmc: Fix SDIO interrupt
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.6-rc3:
- Fix dt binding for sunxi.
- Allow only 1 rotation argument, and allow 0 rotation in video cmdline.
- Small compiler warning fix for panfrost.
- Fix when using performance counters in panfrost when using per fd address space.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f5a6370d-9898-6c72-43e4-5bb56a99b6f2@linux.intel.com
|
|
Commit 1de243b07666 ("media: dt-bindings: media: sun4i-csi: Add compatible
for CSI1 on A10/A20") introduced support for the CSI1 controller on A10 and
A20 that unlike CSI0 doesn't have an ISP and therefore only have two
clocks, the bus and module clocks.
The clocks and clock-names properties have thus been modified to allow
either two or tree clocks. However, the current list has the ISP clock at
the second position, which means the bindings expects a list of either
bus and isp, or bus, isp and mod. The initial intent of the patch was
obviously to have bus and mod in the former case.
Let's fix the binding so that it validates properly.
Fixes: 1de243b07666 ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI1 on A10/A20")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The Allwinner CSI controller is sitting beside the MBUS that is represented
as an interconnect.
Make sure that the interconnect properties are valid in the binding.
Fixes: 7866d6903ce8 ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI0 on R40")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Remove vendor specific compatible string from example, otherwise DT YAML
schemas validation may trigger warnings specific to TI ti,davinci_mdio
and not to the generic MDIO example.
For example, the "bus_freq" is required for davinci_mdio, but not required for
generic mdio example. As result following warning will be produced:
mdio.example.dt.yaml: mdio@5c030000: 'bus_freq' is a required property
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The example in the Tegra124 EMC device tree binding looks like an old
version that doesn't contain all the required fields. Update it with a
version from the current DTS files to fix the make dt_binding_check
target.
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
[robh: also fix missing '#reset-cells']
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
SDIO interrupt must be specified correctly as IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW.
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a few drivers have been updated to use flexible-array syntax instead
of GCC extension
- ili210x touchscreen driver now supports the 2120 protocol flavor
- a couple more of Synaptics devices have been switched over to RMI4
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cyapa - replace zero-length array with flexible-array member
Input: tca6416-keypad - replace zero-length array with flexible-array member
Input: gpio_keys_polled - replace zero-length array with flexible-array member
Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list
Input: synaptics - enable SMBus on ThinkPad L470
Input: synaptics - switch T470s to RMI4 by default
Input: gpio_keys - replace zero-length array with flexible-array member
Input: goldfish_events - replace zero-length array with flexible-array member
Input: psmouse - switch to using i2c_new_scanned_device()
Input: ili210x - add ili2120 support
Input: ili210x - fix return value of is_visible function
|
|
Commit f5a98bfe7b37 ("dt-bindings: display: Convert Allwinner display
pipeline to schemas") introduced a YAML schema for the Allwinner TCON DT
binding, but the H6 TCON-TV compatible was mistakenly set to fallback on
the A83t's, while the initial documentation and the DT are using R40's.
Fix that.
Fixes: f5a98bfe7b37 ("dt-bindings: display: Convert Allwinner display pipeline to schemas")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210100455.78695-1-maxime@cerno.tech
|
|
This adds support for the Ilitek ili2120 touchscreen found in the
Fairphone 2 smartphone.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20200209151904.661210-1-luca@z3ntu.xyz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The intel,rcu-gw binding example has an error:
Documentation/devicetree/bindings/reset/intel,rcu-gw.example.dt.yaml:
reset-controller@e0000000: intel,global-reset: [[16, 30]] is too short
The error isn't really correct as the problem is in how the data is
encoded and the schema is not fixed up by the tooling correctly.
However, array properties should describe the elements in the array, so
lets do that which fixes the error in the process.
Fixes: b7ab0cb00d08 ("dt-bindings: reset: Add YAML schemas for the Intel Reset controller")
Cc: Dilip Kota <eswara.kota@linux.intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller
pieces for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support
ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
and misc cleanups, refactorings of Marvell, TI, other platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
drivers: soc: xilinx: Use mailbox IPI callback
dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
MAINTAINERS: Add brcmstb PCIe controller entry
soc/tegra: fuse: Unmap registers once they are not needed anymore
soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
soc/tegra: fuse: Warn if straps are not ready
soc/tegra: fuse: Cache values of straps and Chip ID registers
memory: tegra30-emc: Correct error message for timed out auto calibration
memory: tegra30-emc: Firm up hardware programming sequence
memory: tegra30-emc: Firm up suspend/resume sequence
soc/tegra: regulators: Do nothing if voltage is unchanged
memory: tegra: Correct reset value of xusb_hostr
soc/tegra: fuse: Add APB DMA dependency for Tegra20
bus: tegra-aconnect: Remove PM_CLK dependency
dt-bindings: mediatek: add MT6765 power dt-bindings
soc: mediatek: cmdq: delete not used define
memory: tegra: Add support for the Tegra194 memory controller
memory: tegra: Only include support for enabled SoCs
memory: tegra: Support DVFS on Tegra186 and later
...
|
|
Pull ARM Device-tree updates from Olof Johansson:
"New SoCs:
- Atmel/Microchip SAM9X60 (ARM926 SoC)
- OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all
variants of it with different GPU/media IP configurations.
- ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU)
- ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of
db8500)
- Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem)
- Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class)
New boards:
- Allwinner:
+ Emlid Neutis SoM (H3 variant)
+ Libre Computer ALL-H3-IT
+ PineH64 Model B
- Amlogic:
+ Libretech Amlogic GX PC (s905d and s912-based variants)
- Atmel/Microchip:
+ Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1)
- Marvell:
+ Armada 385-based SolidRun Clearfog GTR
- NXP:
+ Gateworks GW59xx boards based on i.MX6/6Q/6QDL
+ Tolino Shine 3 eBook reader (i.MX6sl)
+ Embedded Artists COM (i.MX7ULP)
+ SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems)
+ Google Coral Edge TPU (i.MX8MQ)
- Rockchip:
+ Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs)
+ Radxa Rock Pi N10 (RK3399Pro-based)
+ VMARC RK3399Pro SOM
- ST:
+ Reference boards for stm32mp15
- ST Ericsson:
+ Samsung Galaxy S III mini (GT-I8190)
+ HREF520 reference board for DB8520
- TI OMAP:
+ Gen1 Amazon Echo (OMAP3630-based)
- Qualcomm:
+ Inforce 6640 Single Board Computer (msm8996-based)
+ SC7180 IDP (SC7180-based)"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits)
dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml
arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera
arm64: dts: ti: k3-am65-main Add CAL node
arm64: dts: ti: k3-j721e-main: Add McASP nodes
arm64: dts: ti: k3-am654-main: Add McASP nodes
arm64: dts: ti: k3-j721e: DMA support
arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss
arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation
arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS
arm64: dts: ti: k3-am65: DMA support
arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss
arm64: dts: ti: k3-am65-main: Correct main NAVSS representation
ARM: dts: aspeed: rainier: Add UCD90320 power sequencer
ARM: dts: aspeed: rainier: Switch PSUs to unknown version
arm64: dts: rockchip: Kill off "simple-panel" compatibles
ARM: dts: rockchip: Kill off "simple-panel" compatibles
arm64: dts: rockchip: rename dwmmc node names to mmc
ARM: dts: rockchip: rename dwmmc node names to mmc
arm64: dts: exynos: Rename Samsung and Exynos to lowercase
arm64: dts: uniphier: add reset-names to NAND controller node
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c core:
- huge improvements and refactorizations of the Linux I2C
documentation (lots of thanks to Luca for doing it and Jean for the
careful review)
- subsystem wide API conversion to i2c_new_client_device()
- remove obsolete parport-light driver
- smaller core updates (removal of 'extern', enabling more compile
testing, use more helper macros)
- and quite a bunch of driver updates (new IDs, simplifications,
better PM, support of atomic transfers and other improvements)
i2c-mux:
- The main feature is the idle-state rework of the pca954x driver
from Biwen Li
at24 driver:
- minor maintenance: update the license tag, sort headers
- move support for the write-protect pin into nvmem core
- add a reference to the new wp-gpios property in nvmem to at25
bindings
- add support for regulator and pm_runtime control"
* 'i2c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (91 commits)
i2c: cros-ec-tunnel: Fix ACPI identifier
i2c: cros-ec-tunnel: Fix slave device enumeration
i2c: stm32f7: add PM_SLEEP suspend/resume support
i2c: cadence: Fix wording in i2c-cadence driver
i2c: cadence: Fix power management order of operations
i2c: cadence: Fix error printing in case of defer
i2c: cadence: Handle transfer_size rollover
i2c: i801: Add support for Intel Comet Lake PCH-V
docs: i2c: writing-clients: properly name the stop condition
docs: i2c: i2c-protocol: use same wording as smbus-protocol
docs: i2c: rename sections so the overall picture is clearer
docs: i2c: old-module-parameters: use monospace instead of ""
docs: i2c: old-module-parameters: clarify this is for obsolete kernels
docs: i2c: old-module-parameters: fix internal hyperlink
docs: i2c: instantiating-devices: use monospace for sysfs attributes
docs: i2c: instantiating-devices: rearrange static instatiation
docs: i2c: instantiating-devices: fix internal hyperlink
docs: i2c: smbus-protocol: improve I2C Block transactions description
docs: i2c: smbus-protocol: fix punctuation
docs: i2c: smbus-protocol: fix typo
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A collection of fixes:
- Make of_clk.h self contained
- Fix new qcom DT bindings that just merged to match the DTS files
- Fix qcom clk driver to properly detect DFS clk frequencies
- Fix the ls1028a driver to not deref a pointer before assigning it"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
of: clk: Make <linux/of_clk.h> self-contained
clk: qcom: Use ARRAY_SIZE in videocc-sc7180 for parent clocks
clk: qcom: Get rid of the test clock for videocc-sc7180
dt-bindings: clock: Cleanup qcom,videocc bindings for sdm845/sc7180
clk: qcom: Use ARRAY_SIZE in gpucc-sc7180 for parent clocks
clk: qcom: Get rid of the test clock for gpucc-sc7180
dt-bindings: clock: Fix qcom,gpucc bindings for sdm845/sc7180/msm8998
clk: qcom: Use ARRAY_SIZE in dispcc-sc7180 for parent clocks
clk: qcom: Get rid of the test clock for dispcc-sc7180
clk: qcom: Get rid of fallback global names for dispcc-sc7180
dt-bindings: clock: Fix qcom,dispcc bindings for sdm845/sc7180
clk: qcom: rcg2: Don't crash if our parent can't be found; return an error
clk: ls1028a: fix a dereference of pointer 'parent' before a null check
dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft
clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add IT8786 chipset ID
- addition of sam9x60 compatible watchdog
- da9062 improvements
- fix UAF in reboot notifier handling in watchdog core code
- other fixes and small improvements
* tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: da9062: make restart handler atomic safe
watchdog: mtk_wdt: mt2712: Add reset controller
watchdog: mtk_wdt: mt8183: Add reset controller
dt-bindings: mediatek: mt2712: Add #reset-cells
dt-bindings: mediatek: mt8183: Add #reset-cells
dt-bindings: watchdog: da9062: add suspend disable option
watchdog: it87_wdt: add IT8786 ID
watchdog: dw_wdt: ping watchdog to reset countdown before start
watchdog: fix UAF in reboot notifier handling in watchdog core code
watchdog: cadence: Skip printing pointer value
watchdog: qcom: Use platform_get_irq_optional() for bark irq
watchdog: da9062: add power management ops
watchdog: make DesignWare watchdog allow users to set bigger timeout value
drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Mostly cleanups and minor improvements with some new chip support for
some drivers"
* tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
pwm: Remove set but not set variable 'pwm'
pwm: sun4i: Initialize variables before use
pwm: stm32: Remove automatic output enable
pwm: sun4i: Narrow scope of local variable
pwm: bcm2835: Allow building for ARCH_BRCMSTB
pwm: imx27: Eliminate error message for defer probe
pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERR
pwm: sun4i: Move pwm_calculate() out of spin_lock()
pwm: omap-dmtimer: Allow compiling with COMPILE_TEST
pwm: omap-dmtimer: put_device() after of_find_device_by_node()
pwm: omap-dmtimer: Simplify error handling
pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional
pwm: Implement tracing for .get_state() and .apply_state()
pwm: rcar: Document inability to set duty_cycle = 0
pwm: rcar: Drop useless call to pwm_get_state()
pwm: Fix minor Kconfig whitespace issues
pwm: atmel: Implement .get_state()
pwm: atmel: Use register accessors for channels
pwm: atmel: Document known weaknesses of both hardware and software
pwm: atmel: Replace loop in prescale calculation by ad-hoc calculation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Allow compiling the ARM-SMMU drivers as modules.
- Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
collected by Will Deacon. The merge-commit (6855d1ba7537) has all the
details.
- Cleanup of the iommu_put_resv_regions() call-backs in various
drivers.
- AMD IOMMU driver cleanups.
- Update for the x2APIC support in the AMD IOMMU driver.
- Preparation patches for Intel VT-d nested mode support.
- RMRR and identity domain handling fixes for the Intel VT-d driver.
- More small fixes and cleanups.
* tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
iommu/amd: Remove the unnecessary assignment
iommu/vt-d: Remove unnecessary WARN_ON_ONCE()
iommu/vt-d: Unnecessary to handle default identity domain
iommu/vt-d: Allow devices with RMRRs to use identity domain
iommu/vt-d: Add RMRR base and end addresses sanity check
iommu/vt-d: Mark firmware tainted if RMRR fails sanity check
iommu/amd: Remove unused struct member
iommu/amd: Replace two consecutive readl calls with one readq
iommu/vt-d: Don't reject Host Bridge due to scope mismatch
PCI/ATS: Add PASID stubs
iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device
iommu/arm-smmu-v3: Improve add_device() error handling
iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE
iommu/arm-smmu-v3: Add second level of context descriptor table
iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure
iommu/arm-smmu-v3: Propagate ssid_bits
iommu/arm-smmu-v3: Add support for Substream IDs
iommu/arm-smmu-v3: Add context descriptor tables allocators
iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support
ACPI/IORT: Parse SSID property of named component node
...
|
|
The $id path checks were inadequately checking the path part of the $id
value. With the check fixed, there's a number of errors that need to be
fixed. Most of the errors are including 'bindings/' in the path which
should not be as that is considered the root.
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Stefan Popa <stefan.popa@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Marcus Folkesson <marcus.folkesson@gmail.com>
Cc: Kent Gustavsson <kent@minoris.se>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Remove <dt-bindings/clock/intel,lgm-clk.h> dependency as
it is not present in the mainline tree. Use numeric value
instead of LGM_GCLK_PCIE10 macro.
Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
[robh: Also drop interrupt-parent from example]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
DT labels can't have '-' in them causing a compile failure in the example.
Fixing that leads to more warnings:
Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:23.13-33: Warning (reg_format): /example-0/chiptop@e0200000/emmc-phy@a8:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.33-26.13: Warning (avoid_default_addr_size): /example-0/chiptop@e0200000/emmc-phy@a8: Relying on default #address-cells value
Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.33-26.13: Warning (avoid_default_addr_size): /example-0/chiptop@e0200000/emmc-phy@a8: Relying on default #size-cells value
Fixes: 5bc999108025 ("dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY")
Cc: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
Cc: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"A pretty small batch for us, and apologies for it being a bit late, I
wanted to sneak Christophe's user_access_begin() series in.
Summary:
- Implement user_access_begin() and friends for our platforms that
support controlling kernel access to userspace.
- Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
- Some tweaks to our pseries IOMMU code to allow SVMs ("secure"
virtual machines) to use the IOMMU.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit
VDSO, and some other improvements.
- A series to use the PCI hotplug framework to control opencapi
card's so that they can be reset and re-read after flashing a new
FPGA image.
As well as other minor fixes and improvements as usual.
Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy,
Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen
Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A.
Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof
Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael
Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap,
Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago
Jung Bauermann, Tyrel Datwyler, Vaibhav Jain"
* tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits)
powerpc: configs: Cleanup old Kconfig options
powerpc/configs/skiroot: Enable some more hardening options
powerpc/configs/skiroot: Disable xmon default & enable reboot on panic
powerpc/configs/skiroot: Enable security features
powerpc/configs/skiroot: Update for symbol movement only
powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV
powerpc/configs/skiroot: Drop HID_LOGITECH
powerpc/configs: Drop NET_VENDOR_HP which moved to staging
powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE
powerpc/configs: Drop CONFIG_QLGE which moved to staging
powerpc: Do not consider weak unresolved symbol relocations as bad
powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK
powerpc: indent to improve Kconfig readability
powerpc: Provide initial documentation for PAPR hcalls
powerpc: Implement user_access_save() and user_access_restore()
powerpc: Implement user_access_begin and friends
powerpc/32s: Prepare prevent_user_access() for user_access_end()
powerpc/32s: Drop NULL addr verification
powerpc/kuap: Fix set direction in allow/prevent_user_access()
powerpc/32s: Fix bad_kuap_fault()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds support for the Mediatek MT8183 SCP, modem remoteproc on
Qualcomm SC7180 platform, audio and sensor remoteprocs on Qualcomm
MSM8998 and audio, compute, modem and sensor remoteprocs on Qualcomm
SM8150.
It adds votes for necessary power-domains for all Qualcomm TrustZone
based remoteproc instances are held, fixes a bug related to remoteproc
drivers registering before the core has been initialized and does
clean up the Qualcomm modem remoteproc driver"
* tag 'rproc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (21 commits)
remoteproc: qcom: q6v5-mss: Improve readability of reset_assert
remoteproc: qcom: q6v5-mss: Use regmap_read_poll_timeout
remoteproc: qcom: q6v5-mss: Rename boot status timeout
remoteproc: qcom: q6v5-mss: Improve readability across clk handling
remoteproc: use struct_size() helper
remoteproc: Initialize rproc_class before use
rpmsg: add rpmsg support for mt8183 SCP.
remoteproc/mediatek: add SCP support for mt8183
dt-bindings: Add a binding for Mediatek SCP
remoteproc: mss: q6v5-mss: Add modem support on SC7180
dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for SC7180
remoteproc: qcom: pas: Add MSM8998 ADSP and SLPI support
dt-bindings: remoteproc: qcom: Add ADSP and SLPI support for MSM8998 SoC
remoteproc: q6v5-mss: Remove mem clk from the active pool
remoteproc: qcom: Remove unneeded semicolon
remoteproc: qcom: pas: Add auto_boot flag
remoteproc: qcom: pas: Add SM8150 ADSP, CDSP, Modem and SLPI support
dt-bindings: remoteproc: qcom: SM8150 Add ADSP, CDSP, MPSS and SLPI support
remoteproc: qcom: pas: Vote for active/proxy power domains
dt-bindings: remoteproc: qcom: Add power-domain bindings for Q6V5 PAS
...
|
|
This makes the qcom,videocc bindings match the recent changes to the
dispcc and gpucc.
1. Switched to using "bi_tcxo" instead of "xo".
2. Adds a description for the XO clock. Not terribly important but
nice if it cleanly matches its cousins.
3. Updates the example to use the symbolic name for the RPMH clock and
also show that the real devices are currently using 2 address cells
/ size cells and fixes the spacing on the closing brace.
4. Split into 2 files. In this case they could probably share one
file, but let's be consistent.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200203103049.v4.11.I27bbd90045f38cd3218c259526409d52a48efb35@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The qcom,gpucc bindings had a few problems with them:
1. When things were converted to yaml the name of the "gpll0 main"
clock got changed from "gpll0" to "gpll0_main". Change it back for
msm8998.
2. Apparently there is a push not to use purist aliases for clocks but
instead to just use the internal Qualcomm names. For sdm845 and
sc7180 (where the drivers haven't already been changed) move in
this direction.
Things were also getting complicated harder to deal with by jamming
several SoCs into one file. Splitting simplifies things.
Fixes: 5c6f3a36b913 ("dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200203103049.v4.7.I513cd73b16665065ae6c22cf594d8b543745e28c@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The qcom,dispcc bindings had a few problems with them:
1. They didn't specify all the clocks that dispcc is a client of.
Specifically on sc7180 there are two clocks from the DSI PHY and
two from the DP PHY. On sdm845 there are actually two DSI PHYs
(each of which has two clocks) and an extra clock from the gcc.
These all need to be specified.
2. The sdm845.dtsi has existed for quite some time without specifying
the clocks. The Linux driver was relying on global names to match
things up. While we should transition things, it should be noted
in the bindings.
3. The names used the bindings for "xo" and "gpll0" didn't match the
names that QC used for these clocks internally and this was causing
confusion / difficulty with their code generation tools. Switched
to the internal names to simplify everyone's lives. It's not quite
as clean in a purist sense but it should avoid headaches. This
officially changes the binding, but that seems OK in this case.
Also note that I updated the example.
Fixes: 5d28e44ba630 ("dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200203103049.v4.2.I0c4bbb0f75a0880cd4bd90d8b267271e2375e0d0@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The VL_READ and VL_CLR ioctls have been reworked to be more useful.
This will not break userspace as there are very few users and they are
using the integer value as a boolean.
Apart from that, two drivers were reworked and a few fixes here and
there for a net reduction of number of lines.
Summary:
Subsystem:
- the VL_READ and VL_CLR ioctls are now documented and their behavior
is unified across all the drivers.
- RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both
REGMAP_I2C and REGMAP_SPI unecessarily.
Drivers:
- at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and
sama5d2 compatibles.
- cmos: solve lost interrupts issue on MS Surface 3
- hym8563: return proper errno when time is invalid
- rv3029: many fixes, nvram support"
* tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits)
dt-bindings: rtc: at91rm9200: document clocks property
rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
rtc: Kconfig: select REGMAP_I2C when necessary
rtc: Kconfig: properly indent sd3078 entry
rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
rtc: cmos: Use predefined value for RTC IRQ on legacy x86
rtc: cmos: Stop using shared IRQ
rtc: tps6586x: Use IRQ_NOAUTOEN flag
rtc: at91rm9200: use FIELD_PREP/FIELD_GET
rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
rtc: at91rm9200: move register definitions to C file
rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
dt-bindings: rtc: at91rm9200: convert bindings to json-schema
rtc: at91rm9200: remove procfs information
dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
rtc: pcf8563: Use BIT
rtc: moxart: Convert to SPDX identifier
rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
rtc: rx8025: Remove struct i2c_client from struct rx8025_data
rtc: hym8563: Read the valid flag directly instead of caching it
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There are a few changes to the core framework this time around, in
addition to the normal collection of driver updates to support new
SoCs, fix incorrect data, and convert various drivers to clk_hw based
APIs.
In the core, we allow clk_ops::init() to return an error code now so
that we can fail clk registration if the callback does something like
fail to allocate memory. We also add a new "terminate" clk_op so that
things done in clk_ops::init() can be undone, e.g. free memory. We
also spit out a warning now when critical clks fail to enable and we
support changing clk rates and enable/disable state through debugfs
when developers compile the kernel themselves.
On the driver front, we get support for what seems like a lot of
Qualcomm and NXP SoCs given that those vendors dominate the diffstat.
There are a couple new drivers for Xilinx and Amlogic SoCs too. The
updates are all small things like fixing the way glitch free muxes
switch parents, avoiding div-by-zero problems, or fixing data like
parent names. See the updates section below for more details.
Finally, the "basic" clk types have been converted to support
specifying parents with clk_hw pointers. This work includes an
overhaul of the fixed-rate clk type to be more modern by using clk_hw
APIs.
Core:
- Let clk_ops::init() return an error code
- Add a clk_ops::terminate() callback to undo clk_ops::init()
- Warn about critical clks that fail to enable or prepare
- Support dangerous debugfs actions on clks with dead code
New Drivers:
- Support for Xilinx Versal platform clks
- Display clk controller on qcom sc7180
- Video clk controller on qcom sc7180
- Graphics clk controller on qcom sc7180
- CPU PLLs for qcom msm8916
- Move qcom msm8974 gfx3d clk to RPM control
- Display port clk support on qcom sdm845 SoCs
- Global clk controller on qcom ipq6018
- Add a driver for BCLK of Freescale SAI cores
- Add cam, vpe and sgx clock support for TI dra7
- Add aess clock support for TI omap5
- Enable clks for CPUfreq on Allwinner A64 SoCs
- Add Amlogic meson8b DDR clock controller
- Add input clocks to Amlogic meson8b controllers
- Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2
- i.MX8MP clk driver support
Updates:
- Convert gpio, fixed-factor, mux, gate, divider basic clks to hw
based APIs
- Detect more PRMCU variants in ux500 driver
- Adjust the composite clk type to new way of describing clk parents
- Fixes for clk controllers on qcom msm8998 SoCs
- Fix gmac main clock for TI dra7
- Move TI dra7-atl clock header to correct location
- Fix hidden node name dependency on TI clkctrl clocks
- Fix Amlogic meson8b mali clock update using the glitch free mux
- Fix Amlogic pll driver division by zero at init
- Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config
symbols
- Switch more i.MX clk drivers to clk_hw based APIs
- Disable non-functional divider between pll4_audio_div and
pll4_post_div on imx6q
- Fix watchdog2 clock name typo in imx7ulp clock driver
- Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M
SoCs
- Suppress bind attrs for i.MX8M clock driver
- Add a big comment in imx8qxp-lpcg driver to tell why
devm_platform_ioremap_resource() shouldn't be used for the driver
- A correction on i.MX8MN usb1_ctrl parent clock setting"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits)
dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id
clk: ls1028a: Fix warning on clamp() usage
clk: qoriq: add ls1088a hwaccel clocks support
clk: ls1028a: Add clock driver for Display output interface
dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
clk: fsl-sai: new driver
dt-bindings: clock: document the fsl-sai driver
clk: composite: add _register_composite_pdata() variants
clk: qcom: rpmh: Sort OF match table
dt-bindings: fix warnings in validation of qcom,gcc.yaml
dt-binding: fix compilation error of the example in qcom,gcc.yaml
clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag
clk: zynqmp: Fix divider calculation
clk: zynqmp: Add support for get max divider
clk: zynqmp: Warn user if clock user are more than allowed
clk: zynqmp: Extend driver for versal
dt-bindings: clock: Add bindings for versal clock driver
clk: ti: clkctrl: Fix hidden dependency to node name
clk: ti: add clkctrl data dra7 sgx
clk: ti: omap5: Add missing AESS clock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a driver for SGI IOC3 PS/2 controller
- updates to driver for FocalTech FT5x06 series touch screen
controllers
- other assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - switch to reduced reporting mode
dt-bindings: touchscreen: Convert Goodix touchscreen to json-schema
dt-bindings: touchscreen: Add touchscreen schema
Input: add IOC3 serio driver
Input: axp20x-pek - enable wakeup for all AXP variants
Input: axp20x-pek - respect userspace wakeup configuration
Input: ads7846 - use new `delay` structure for SPI transfer delays
Input: edt-ft5x06 - use pm core to enable/disable the wake irq
Input: edt-ft5x06 - make wakeup-source switchable
Input: edt-ft5x06 - document wakeup-source capability
Input: edt-ft5x06 - alphabetical include reorder
Input: edt-ft5x06 - work around first register access error
Input: apbps2 - add __iomem to register struct
Input: axp20x-pek - make device attributes static
Input: elants_i2c - check Remark ID when attempting firmware update
|
|
The 'qcom,gcc.yaml' file failed self-validation (dt_binding_check)
because it required a property to be either (3 entries big),
(3 entries big), or (7 entries big), but not more than one of those
things. That didn't make a ton of sense.
This patch splits all of the exceptional device trees (AKA those that
would have needed if/then/else rules) from qcom,gcc.yaml. It also
cleans up some cruft found while doing that.
After this lands, this worked for me atop clk-next with just the known
error about msm8998:
for f in \
Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc.yaml; do \
ARCH=arm64 make dtbs_check DT_SCHEMA_FILES=$f; \
done
I then picked this patch atop linux-next (next-20200129) and ran:
# Delete broken yaml:
rm Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
ARCH=arm64 make dt_binding_check | grep 'clock/qcom'
...and that didn't seem to indicate problems.
Arbitrary decisions made (yell if you want changed):
- Left all the older devices (where clocks / clock-names weren't
specified) in a single file.
- Didn't make clocks "required" for msm8996 but left them as listed.
This seems a little weird but it matches the old binding.
Misc cleanups as part of this patch:
- Fixed schema id to not have "bindings/" as per Rob [1].
- Listed include files as per Stephen.
- sm8150 was claimed to be same set of clocks as sc7180, but driver
and dts appear to say that "bi_tcxo_ao" doesn't exist. Fixed.
- In "apq8064", "#thermal-sensor-cells" was missing the "#".
- Got rid of "|" at the end of top description since spacing doesn't
matter.
- Changed indentation to consistently 2 spaces (it was 3 in some
places).
- Added period at the end of protected-clocks description.
- No space before ":".
- Updated sc7180/sm8150 example to use the 'qcom,rpmh.h' include.
- Updated sc7180/sm8150 example to use larger address/size cells as
per reality.
- Updated sc7180/sm8150 example to point to the sleep_clk rather than
<0>.
- Made it so that gcc-ipq8074 didn't require #power-domain-cells since
actual dts didn't have it and I got no hits from:
git grep _GDSC include/dt-bindings/clock/qcom,gcc-ipq8074.h
- Made it so that gcc-qcs404 didn't require #power-domain-cells since
actual dts didn't have it and I got no hits from:
git grep _GDSC include/dt-bindings/clock/qcom,gcc-qcs404.h
Noticed, but not done in this patch (volunteers needed):
- Add "aud_ref_clk" to sm8150 bindings / dts even though I found a
reference to it in "gcc-sm8150.c".
- Fix node name in actual ipq8074 to be "clock-controller" (it's gcc).
- Since the example doesn't need phandes to exist, in msm8998 could
just make up places providing some of the clocks currently bogused
out with <0>.
- On msm8998 clocks are listed as required but current dts doesn't
have them.
[1] https://lore.kernel.org/r/CAL_Jsq+_2E-bAbP9F6VYkWRp0crEyRGa5peuwP58-PZniVny7w@mail.gmail.com
Fixes: ab91f72e018a ("clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20200203094843.v3.1.I4452dc951d7556ede422835268742b25a18b356b@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
