summaryrefslogtreecommitdiff
path: root/Documentation/ABI
AgeCommit message (Collapse)Author
2018-04-05Merge tag 'f2fs-for-4.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs update from Jaegeuk Kim: "In this round, we've mainly focused on performance tuning and critical bug fixes occurred in low-end devices. Sheng Yong introduced lost_found feature to keep missing files during recovery instead of thrashing them. We're preparing coming fsverity implementation. And, we've got more features to communicate with users for better performance. In low-end devices, some memory-related issues were fixed, and subtle race condtions and corner cases were addressed as well. Enhancements: - large nat bitmaps for more free node ids - add three block allocation policies to pass down write hints given by user - expose extension list to user and introduce hot file extension - tune small devices seamlessly for low-end devices - set readdir_ra by default - give more resources under gc_urgent mode regarding to discard and cleaning - introduce fsync_mode to enforce posix or not - nowait aio support - add lost_found feature to keep dangling inodes - reserve bits for future fsverity feature - add test_dummy_encryption for FBE Bug fixes: - don't use highmem for dentry pages - align memory boundary for bitops - truncate preallocated blocks in write errors - guarantee i_times on fsync call - clear CP_TRIMMED_FLAG correctly - prevent node chain loop during recovery - avoid data race between atomic write and background cleaning - avoid unnecessary selinux violation warnings on resgid option - GFP_NOFS to avoid deadlock in quota and read paths - fix f2fs_skip_inode_update to allow i_size recovery In addition to the above, there are several minor bug fixes and clean-ups" * tag 'f2fs-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (50 commits) f2fs: remain written times to update inode during fsync f2fs: make assignment of t->dentry_bitmap more readable f2fs: truncate preallocated blocks in error case f2fs: fix a wrong condition in f2fs_skip_inode_update f2fs: reserve bits for fs-verity f2fs: Add a segment type check in inplace write f2fs: no need to initialize zero value for GFP_F2FS_ZERO f2fs: don't track new nat entry in nat set f2fs: clean up with F2FS_BLK_ALIGN f2fs: check blkaddr more accuratly before issue a bio f2fs: Set GF_NOFS in read_cache_page_gfp while doing f2fs_quota_read f2fs: introduce a new mount option test_dummy_encryption f2fs: introduce F2FS_FEATURE_LOST_FOUND feature f2fs: release locks before return in f2fs_ioc_gc_range() f2fs: align memory boundary for bitops f2fs: remove unneeded set_cold_node() f2fs: add nowait aio support f2fs: wrap all options with f2fs_sb_info.mount_opt f2fs: Don't overwrite all types of node to keep node chain f2fs: introduce mount option for fsync mode ...
2018-04-05Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc, ufs, mpt3sas, hisi_sas. In addition we have removed several really old drivers: sym53c416, NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c initialization from all remaining drivers. Plus an assortment of bug fixes, initialization errors and other minor fixes" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (168 commits) scsi: ufs: Add support for Auto-Hibernate Idle Timer scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries scsi: qla2xxx: fx00 copypaste typo scsi: qla2xxx: fix error message on <qla2400 scsi: smartpqi: update driver version scsi: smartpqi: workaround fw bug for oq deletion scsi: arcmsr: Change driver version to v1.40.00.05-20180309 scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter ready scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection. scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug scsi: qla2xxx: Update driver version to 10.00.00.06-k scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY scsi: qla2xxx: Remove nvme_done_list scsi: qla2xxx: Return busy if rport going away scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB change scsi: qla2xxx: Add FC-NVMe abort processing scsi: qla2xxx: Add changes for devloss timeout in driver ...
2018-04-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - 3rd generation Wacom Intuos BT device support from Aaron Armstrong Skomra - support for NSG-MR5U and NSG-MR7U devices from Todd Kelner - multitouch Razer Blade Stealth support from Benjamin Tissoires - Elantech touchpad support from Alexandrov Stansilav - a few other scattered-around fixes and cleanups to drivers and generic code * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (31 commits) HID: google: Enable PM Full On mode when adjusting backlight HID: google: add google hammer HID driver HID: core: reset the quirks before calling probe again HID: multitouch: do not set HID_QUIRK_NO_INIT_REPORTS HID: core: remove the need for HID_QUIRK_NO_EMPTY_INPUT HID: use BIT() macro for quirks too HID: use BIT macro instead of plain integers for flags HID: multitouch: remove dead zones of Razer Blade Stealth HID: multitouch: export a quirk for the button handling of touchpads HID: usbhid: extend the polling interval configuration to keyboards HID: ntrig: document sysfs interface HID: wacom: wacom_wac_collection() is local to wacom_wac.c HID: wacom: generic: add the "Report Valid" usage HID: wacom: generic: Support multiple tools per report HID: wacom: Add support for 3rd generation Intuos BT HID: core: rewrite the hid-generic automatic unbind HID: sony: Add touchpad support for NSG-MR5U and NSG-MR7U remotes HID: hid-multitouch: Use true and false for boolean values HID: hid-ntrig: use true and false for boolean values HID: logitech-hidpp: document sysfs interface ...
2018-04-04Merge tag 'char-misc-4.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc driver patches for 4.17-rc1. There are a lot of little things in here, nothing huge, but all important to the different hardware types involved: - thunderbolt driver updates - parport updates (people still care...) - nvmem driver updates - mei updates (as always) - hwtracing driver updates - hyperv driver updates - extcon driver updates - ... and a handful of even smaller driver subsystem and individual driver updates All of these have been in linux-next with no reported issues" * tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (149 commits) hwtracing: Add HW tracing support menu intel_th: Add ACPI glue layer intel_th: Allow forcing host mode through drvdata intel_th: Pick up irq number from resources intel_th: Don't touch switch routing in host mode intel_th: Use correct method of finding hub intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate stm class: Make dummy's master/channel ranges configurable stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate MAINTAINERS: Bestow upon myself the care for drivers/hwtracing hv: add SPDX license id to Kconfig hv: add SPDX license to trace Drivers: hv: vmbus: do not mark HV_PCIE as perf_device Drivers: hv: vmbus: respect what we get from hv_get_synint_state() /dev/mem: Avoid overwriting "err" in read_mem() eeprom: at24: use SPDX identifier instead of GPL boiler-plate eeprom: at24: simplify the i2c functionality checking eeprom: at24: fix a line break eeprom: at24: tweak newlines eeprom: at24: refactor at24_probe() ...
2018-04-04Merge tag 'staging-4.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO updates from Greg KH: "Here is the big set of Staging/IIO driver patches for 4.17-rc1. It is a lot, over 500 changes, but not huge by previous kernel release standards. We deleted more lines than we added again (27k added vs. 91k remvoed), thanks to finally being able to delete the IRDA drivers and networking code. We also deleted the ccree crypto driver, but that's coming back in through the crypto tree to you, in a much cleaned-up form. Added this round is at lot of "mt7621" device support, which is for an embedded device that Neil Brown cares about, and of course a handful of new IIO drivers as well. And finally, the fsl-mc core code moved out of the staging tree to the "real" part of the kernel, which is nice to see happen as well. Full details are in the shortlog, which has all of the tiny cleanup patches described. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (579 commits) staging: rtl8723bs: Remove yield call, replace with cond_resched() staging: rtl8723bs: Replace yield() call with cond_resched() staging: rtl8723bs: Remove unecessary newlines from 'odm.h'. staging: rtl8723bs: Rework 'struct _ODM_Phy_Status_Info_' coding style. staging: rtl8723bs: Rework 'struct _ODM_Per_Pkt_Info_' coding style. staging: rtl8723bs: Replace NULL pointer comparison with '!'. staging: rtl8723bs: Factor out rtl8723bs_recv_tasklet() sections. staging: rtl8723bs: Fix function signature that goes over 80 characters. staging: rtl8723bs: Fix lines too long in update_recvframe_attrib(). staging: rtl8723bs: Remove unnecessary blank lines in 'rtl8723bs_recv.c'. staging: rtl8723bs: Change camel case to snake case in 'rtl8723bs_recv.c'. staging: rtl8723bs: Add missing braces in else statement. staging: rtl8723bs: Add spaces around ternary operators. staging: rtl8723bs: Fix lines with trailing open parentheses. staging: rtl8723bs: Remove unnecessary length #define's. staging: rtl8723bs: Fix IEEE80211 authentication algorithm constants. staging: rtl8723bs: Fix alignment in rtw_wx_set_auth(). staging: rtl8723bs: Remove braces from single statement conditionals. staging: rtl8723bs: Remove unecessary braces from switch statement. staging: rtl8723bs: Fix newlines in rtw_wx_set_auth(). ...
2018-04-04Merge tag 'usb-4.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 4.17-rc1. Lots of USB typeC work happened this round, with code moving from the staging directory into the "real" part of the kernel, as well as new infrastructure being added to be able to handle the different types of "roles" that typeC requires. There is also the normal huge set of USB gadget controller and driver updates, along with XHCI changes, and a raft of other tiny fixes all over the USB tree. And the PHY driver updates are merged in here as well as they interacted with the USB drivers in some places. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (250 commits) Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870" usb: musb: gadget: misplaced out of bounds check usb: chipidea: imx: Fix ULPI on imx53 usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag usb: chipidea: usbmisc: small clean up usb: chipidea: usbmisc: evdo can be set e/o reset usb: chipidea: usbmisc: evdo is only specific to OTG port USB: serial: ftdi_sio: add Id for Physik Instrumente E-870 usb: dwc3: gadget: never call ->complete() from ->ep_queue() usb: gadget: udc: core: update usb_ep_queue() documentation usb: host: Remove the deprecated ATH79 USB host config options usb: roles: Fix return value check in intel_xhci_usb_probe() USB: gadget: f_midi: fixing a possible double-free in f_midi usb: core: Add USB_QUIRK_DELAY_CTRL_MSG to usbcore quirks usb: core: Copy parameter string correctly and remove superfluous null check USB: announce bcdDevice as well as idVendor, idProduct. USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw usb: hub: Reduce warning to notice on power loss USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator USB: serial: cp210x: add ELDAT Easywave RX09 id ...
2018-04-04Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The usual pile of boring changes: - Consolidate tasklet functions to share code instead of duplicating it - The first step for making the low level entry handler management on multi-platform kernels generic - A new sysfs file which allows to retrieve the wakeup state of interrupts. - Ensure that the interrupt thread follows the effective affinity and not the programmed affinity to avoid cross core wakeups. - Two new interrupt controller drivers (Microsemi Ocelot and Qualcomm PDC) - Fix the wakeup path clock handling for Reneasas interrupt chips. - Rework the boot time register reset for ARM GIC-V2/3 - Better suspend/resume support for ARM GIV-V3/ITS - Add missing locking to the ARM GIC set_type() callback - Small fixes for the irq simulator code - SPDX identifiers for the irq core code and removal of boiler plate - Small cleanups all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) openrisc: Set CONFIG_MULTI_IRQ_HANDLER arm64: Set CONFIG_MULTI_IRQ_HANDLER genirq: Make GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER irqchip/gic: Take lock when updating irq type irqchip/gic: Update supports_deactivate static key to modern api irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling irqchip: Add a driver for the Microsemi Ocelot controller dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller irqchip/gic-v3: Probe for SCR_EL3 being clear before resetting AP0Rn irqchip/gic-v3: Don't try to reset AP0Rn irqchip/gic-v3: Do not check trigger configuration of partitionned LPIs genirq: Remove license boilerplate/references genirq: Add missing SPDX identifiers genirq/matrix: Cleanup SPDX identifier genirq: Cleanup top of file comments genirq: Pass desc to __irq_free instead of irq number irqchip/gic-v3: Loudly complain about the use of IRQ_TYPE_NONE irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER ...
2018-04-03Merge tag 'media/v4.17-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new CEC pin injection code for testing purposes - DVB frontend cxd2099 promoted from staging - new platform driver for Sony cxd2880 DVB devices - new sensor drivers: mt9t112, ov2685, ov5695, ov772x, tda1997x, tw9910.c - removal of unused cx18 and ivtv alsa mixers - the reneseas-ceu driver doesn't depend on soc_camera anymore and moved from staging - removed the mantis_vp3028 driver, unused since 2009 - s5p-mfc: add support for version 10 of the MSP - added a decoder for imon protocol - atomisp: lots of cleanups - imx074 and mt9t031: don't depend on soc_camera anymore, being promoted from staging - added helper functions to better support DVB I2C binding - lots of driver improvements and cleanups * tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (438 commits) media: v4l2-ioctl: rename a temp var that stores _IOC_SIZE(cmd) media: fimc-capture: get rid of two warnings media: dvb-usb-v2: fix a missing dependency of I2C_MUX media: uvc: to the right check at uvc_ioctl_enum_framesizes() media: cec-core: fix a bug at cec_error_inj_write() media: tda9840: cleanup a warning media: tm6000: avoid casting just to print pointer address media: em28xx-input: improve error handling code media: zr364xx: avoid casting just to print pointer address media: vivid-radio-rx: add a cast to avoid a warning media: saa7134-alsa: don't use casts to print a buffer address media: solo6x10: get rid of an address space warning media: zoran: don't cast pointers to print them media: ir-kbd-i2c: change the if logic to avoid a warning media: ir-kbd-i2c: improve error handling code media: saa7134-input: improve error handling media: s2255drv: fix a casting warning media: ivtvfb: Cleanup some warnings media: videobuf-dma-sg: Fix a weird cast soc_camera: fix a weird cast on printk ...
2018-04-03Merge tag 'docs-4.17' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "There's been a fair amount of activity in Documentation/ this time around: - Lots of work aligning Documentation/ABI with reality, done by Aishwarya Pant. - The trace documentation has been converted to RST by Changbin Du - I thrashed up kernel-doc to deal with a parsing issue and to try to make the code more readable. It's still a 20+-year-old Perl hack, though. - Lots of other updates, typo fixes, and more" * tag 'docs-4.17' of git://git.lwn.net/linux: (82 commits) Documentation/process: update FUSE project website docs: kernel-doc: fix parsing of arrays dmaengine: Fix spelling for parenthesis in dmatest documentation dmaengine: Make dmatest.rst indeed reST compatible dmaengine: Add note to dmatest documentation about supported channels Documentation: magic-numbers: Fix typo Documentation: admin-guide: add kvmconfig, xenconfig and tinyconfig commands Input: alps - Update documentation for trackstick v3 format Documentation: Mention why %p prints ptrval COPYING: use the new text with points to the license files COPYING: create a new file with points to the Kernel license files Input: trackpoint: document sysfs interface xfs: Change URL for the project in xfs.txt char/bsr: add sysfs interface documentation acpi: nfit: document sysfs interface block: rbd: update sysfs interface Documentation/sparse: fix typo Documentation/CodingStyle: Add an example for braces docs/vm: update 00-INDEX kernel-doc: Remove __sched markings ...
2018-04-03Merge tag 'for-linus-4.17' of git://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "Mostly small changes, as usual. This does add an IPMI BMC server-side driver, to allow a Linux system to act as an IPMI controller. That's the biggest change, but it is just a new driver that is fairly narrow in use. The other largish change is removing ACPI SPMI probe support, which should have never really been there in the beginning" * tag 'for-linus-4.17' of git://github.com/cminyard/linux-ipmi: ipmi/parisc: Add IPMI chassis poweroff for certain HP PA-RISC and IA-64 servers ipmi_ssif: Fix kernel panic at msg_done_handler ipmi:pci: Blacklist a Realtek "IPMI" device ipmi: Remove ACPI SPMI probing from the system interface driver ipmi: Remove ACPI SPMI probing from the SSIF (I2C) driver ipmi: missing error code in try_smi_init() ipmi: use ARRAY_SIZE for poweroff_functions array sizing calculation ipmi: Consolidate cleanup code ipmi: Remove some unnecessary initializations ipmi: Fix some error cleanup issues ipmi: Add or fix SPDX-License-Identifier in all files ipmi: Re-use existing macros for built-in properties ipmi:pci: Make the PCI defines consistent with normal Linux ones ipmi: kcs_bmc: coding-style fixes and use new poll type char/ipmi: add documentation for sysfs interface ipmi: kcs_bmc: mark expected switch fall-through in kcs_bmc_handle_data ipmi: add an Aspeed KCS IPMI BMC driver ipmi: add a KCS IPMI BMC driver
2018-04-03Merge tag 'pm-4.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update the cpuidle poll state definition to reduce excessive energy usage related to it, add new CPU ID to the RAPL power capping driver, update the ACPI system suspend code to handle some special cases better, extend the PM core's device links code slightly, add new sysfs attribute for better suspend-to-idle diagnostics and easier hibernation handling, update power management tools and clean up cpufreq quite a bit. Specifics: - Modify the cpuidle poll state implementation to prevent CPUs from staying in the loop in there for excessive times (Rafael Wysocki). - Add Intel Cannon Lake chips support to the RAPL power capping driver (Joe Konno). - Add reference counting to the device links handling code in the PM core (Lukas Wunner). - Avoid reconfiguring GPEs on suspend-to-idle in the ACPI system suspend code (Rafael Wysocki). - Allow devices to be put into deeper low-power states via ACPI if both _SxD and _SxW are missing (Daniel Drake). - Reorganize the core ACPI suspend-to-idle wakeup code to avoid a keyboard wakeup issue on Asus UX331UA (Chris Chiu). - Prevent the PCMCIA library code from aborting suspend-to-idle due to noirq suspend failures resulting from incorrect assumptions (Rafael Wysocki). - Add coupled cpuidle supprt to the Exynos3250 platform (Marek Szyprowski). - Add new sysfs file to make it easier to specify the image storage location during hibernation (Mario Limonciello). - Add sysfs files for collecting suspend-to-idle usage and time statistics for CPU idle states (Rafael Wysocki). - Update the pm-graph utilities (Todd Brandt). - Reduce the kernel log noise related to reporting Low-power Idle constraings by the ACPI system suspend code (Rafael Wysocki). - Make it easier to distinguish dedicated wakeup IRQs in the /proc/interrupts output (Tony Lindgren). - Add the frequency table validation in cpufreq to the core and drop it from a number of cpufreq drivers (Viresh Kumar). - Drop "cooling-{min|max}-level" for CPU nodes from a couple of DT bindings (Viresh Kumar). - Clean up the CPU online error code path in the cpufreq core (Viresh Kumar). - Fix assorted issues in the SCPI, CPPC, mediatek and tegra186 cpufreq drivers (Arnd Bergmann, Chunyu Hu, George Cherian, Viresh Kumar). - Drop memory allocation error messages from a few places in cpufreq and cpuildle drivers (Markus Elfring)" * tag 'pm-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits) ACPI / PM: Fix keyboard wakeup from suspend-to-idle on ASUS UX331UA cpufreq: CPPC: Use transition_delay_us depending transition_latency PM / hibernate: Change message when writing to /sys/power/resume PM / hibernate: Make passing hibernate offsets more friendly cpuidle: poll_state: Avoid invoking local_clock() too often PM: cpuidle/suspend: Add s2idle usage and time state attributes cpuidle: Enable coupled cpuidle support on Exynos3250 platform cpuidle: poll_state: Add time limit to poll_idle() cpufreq: tegra186: Don't validate the frequency table twice cpufreq: speedstep: Don't validate the frequency table twice cpufreq: sparc: Don't validate the frequency table twice cpufreq: sh: Don't validate the frequency table twice cpufreq: sfi: Don't validate the frequency table twice cpufreq: scpi: Don't validate the frequency table twice cpufreq: sc520: Don't validate the frequency table twice cpufreq: s3c24xx: Don't validate the frequency table twice cpufreq: qoirq: Don't validate the frequency table twice cpufreq: pxa: Don't validate the frequency table twice cpufreq: ppc_cbe: Don't validate the frequency table twice cpufreq: powernow: Don't validate the frequency table twice ...
2018-04-02Merge branches 'pm-cpuidle' and 'pm-tools'Rafael J. Wysocki
* pm-cpuidle: cpuidle: poll_state: Avoid invoking local_clock() too often PM: cpuidle/suspend: Add s2idle usage and time state attributes cpuidle: Enable coupled cpuidle support on Exynos3250 platform cpuidle: poll_state: Add time limit to poll_idle() ARM: cpuidle: Drop memory allocation error message from arm_idle_init_cpu() * pm-tools: pm-graph: AnalyzeSuspend v5.0 pm-graph: AnalyzeBoot v2.2 pm-graph: config files and installer
2018-04-02Merge branches 'acpi-osi', 'acpi-scan', 'acpi-tad', 'acpi-video' and 'acpi-misc'Rafael J. Wysocki
* acpi-osi: ACPI / OSI: Add OEM _OSI strings to disable NVidia RTD3 * acpi-scan: ACPI / scan: Send change uevent with offine environmental data * acpi-tad: ACPI: Add Time and Alarm Device (TAD) driver * acpi-video: ACPI / video: Add quirk to force acpi-video backlight on Samsung 670Z5E * acpi-misc: ACPI / Kconfig: Update ACPI_PROCFS_POWER help text
2018-04-02Merge branches 'acpi-battery', 'acpi-doc' and 'acpi-pmic'Rafael J. Wysocki
* acpi-battery: Revert "ACPI: battery: Add the ThinkPad "Not Charging" quirk" ACPI: battery: do not export degraded capacity values over 100 ACPI: battery: make function __battery_hook_unregister() static ACPI: battery: Add the ThinkPad "Not Charging" quirk thinkpad_acpi: Add support for battery thresholds power: add to_power_supply macro to the API battery: Add the battery hooking API * acpi-doc: ACPI: sysfs: Update device object sysfs documentation * acpi-pmic: ACPI / PMIC: Replace license boilerplate with SPDX license identifier
2018-03-30PM / hibernate: Make passing hibernate offsets more friendlyMario Limonciello
Currently the only way to specify a hibernate offset for a swap file is on the kernel command line. Add a new /sys/power/resume_offset that lets userspace specify the offset and disk to use when initiating a hibernate cycle. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-29PM: cpuidle/suspend: Add s2idle usage and time state attributesRafael J. Wysocki
Add a new attribute group called "s2idle" under the sysfs directory of each cpuidle state that supports the ->enter_s2idle callback and put two new attributes, "usage" and "time", into that group to represent the number of times the given state was requested for suspend-to-idle and the total time spent in suspend-to-idle after requesting that state, respectively. That will allow diagnostic information related to suspend-to-idle to be collected without enabling advanced debug features and analyzing dmesg output. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-28Merge 4.16-rc7 into staging-nextGreg Kroah-Hartman
We want the IIO and staging driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-28Merge 4.16-rc7 into char-misc-nextGreg Kroah-Hartman
We want the hyperv fix in here for merging and testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22media: debugfs-cec-error-inj: document CEC error inj debugfs ABIHans Verkuil
Document the core of the debugfs CEC error injection ABI. The driver specific commands are documented elsewhere and this file points to that documentation. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22usb: common: Small class for USB role switchesHeikki Krogerus
USB role switch is a device that can be used to choose the data role for USB connector. With dual-role capable USB controllers, the controller itself will be the switch, but on some platforms the USB host and device controllers are separate IPs and there is a mux between them and the connector. On those platforms the mux driver will need to register the switch. With USB Type-C connectors, the host-to-device relationship is negotiated over the Configuration Channel (CC). That means the USB Type-C drivers need to be in control of the role switch. The class provides a simple API for the USB Type-C drivers for the control. For other types of USB connectors (mainly microAB) the class provides user space control via sysfs attribute file that can be used to request role swapping from the switch. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22usb: core: introduce per-port over-current countersRichard Leitner
For some userspace applications information on the number of over-current conditions at specific USB hub ports is relevant. In our case we have a series of USB hardware (using the cp210x driver) which communicates using a proprietary protocol. These devices sometimes trigger an over-current situation on some hubs. In case of such an over-current situation the USB devices offer an interface for reducing the max used power. As these conditions are quite rare and imply performance reductions of the device we don't want to reduce the max power always. Therefore give user-space applications the possibility to react adequately by introducing an over_current_counter in the usb port struct which is exported via sysfs. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-21scsi: ufs: Add support for Auto-Hibernate Idle TimerAdrian Hunter
UFS host controllers may support an autonomous power management feature called the Auto-Hibernate Idle Timer. The timer is set to the number of microseconds of idle time before the UFS host controller will autonomously put the link into Hibernate state. That will save power at the expense of increased latency. Any access to the host controller interface registers will automatically put the link out of Hibernate state. So once configured, the feature is transparent to the driver. Expose the Auto-Hibernate Idle Timer value via SysFS to allow users to choose between power efficiency or lower latency. Set a default value of 150 ms. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entriesStanislav Nijnikov
Read from these files will return the integer value of the chosen power management level now. Separate entries were added to show the target UFS device and UIC link states. The description of the possible power managements levels was added to the ABI file. The on-write behaviour of these entries wasn't changed. [mkp: typo] Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21Input: trackpoint: document sysfs interfaceAishwarya Pant
Descriptions have been collected from git commit logs, code commits and the TrackPoint System Version 4.0 Engineering Specification. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-21char/bsr: add sysfs interface documentationAishwarya Pant
Descriptions have collected from code comments and by reading through code. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-21acpi: nfit: document sysfs interfaceAishwarya Pant
This is an attempt to document the nfit sysfs interface. The descriptions have been collected from git commit logs and the ACPI specification 6.2. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-21block: rbd: update sysfs interfaceAishwarya Pant
The existing sysfs interface has been updated to be in the same format as described in Documentation/ABI/README. This will be useful for scripting and tracking changes in the ABI. Attributes have been grouped by functionality and/or the date on which they were added. There are a couple of more changes: - The attributes have been annotated with file permissions RO/RW/WO. - Added description of the bus attribute supported_features Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-20ACPI: Add Time and Alarm Device (TAD) driverRafael J. Wysocki
Introduce a driver for the ACPI Time and Alarm Device (TAD) based on Section 9.18 of ACPI 6.2. This driver only supports the system wakeup capabilities of the TAD which are mandatory. Support for the RTC capabilities of the TAD will be added to it in the future. This driver is entirely sysfs-based. It provides attributes (under the TAD platform device) to allow user space to manage the AC and DC wakeup timers of the TAD: set and read their values, set and check their expire timer wake policies, check and clear their status and check the capabilities of the TAD reported by AML. The DC timer attributes are only present if the TAD supports a separate DC alarm timer. The wakeup events handling and power management of the TAD is expected to be taken care of by the ACPI PM domain attached to its platform device. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2018-03-20Merge tag 'thunderbolt-for-v4.17' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into char-misc-next Mike writes: thunderbolt: Changes for v4.17 merge window New features: - Intel Titan Ridge Thunderbolt 3 controller support - Preboot ACL supported, allowing more secure way to boot from Thunderbolt devices - New "USB only" security level In addition there are a couple of fixes for increasing timeout when authenticating the ICM firmware and reading root switch config space. Preventing a crash on certain Lenovo systems where ICM firmware for some reason is not always properly starting up.
2018-03-19Merge branch 'for-4.16-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "I sat on them too long and it's quite a few this late, but nothing has a wide blast area. The changes are... - Fix corner cases in SG command handling. - Recent introduction of default powersaving mode config option exposed several devices with broken powersaving behaviors. A number of patches to update the blacklist accordingly. - Fix a kernel panic on SAS hotplug. - Other misc and device specific updates" * 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs libata: Enable queued TRIM for Samsung SSD 860 PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L ahci: Add PCI-id for the Highpoint Rocketraid 644L card ata: do not schedule hot plug if it is a sas host libata: disable LPM for Crucial BX100 SSD 500GB drive libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs libata: update documentation for sysfs interfaces ata: sata_rcar: Remove unused variable in sata_rcar_init_controller() libata: transport: cleanup documentation of sysfs interface sata_rcar: Reset SATA PHY when Salvator-X board resumes libata: don't try to pass through NCQ commands to non-NCQ devices libata: remove WARN() for DMA or PIO command without data libata: fix length validation of ATAPI-relayed SCSI commands ata: libahci: fix comment indentation ahci: Add check for device presence (PCIe hot unplug) in ahci_stop_engine() libata: Fix compile warning with ATA_DEBUG enabled
2018-03-14Merge branch 'linus' into irq/core to pick up dependencies.Thomas Gleixner
2018-03-14mei: limit the number of queued writesAlexander Usyskin
Limit the number of queued writes per client. Writes above this threshold are blocked till place in the transmit queue is available. The limit is configurable via sysfs and defaults to 50. The implementation should provide blocking I/O behavior. Prior to this change one would end up in the hands of OOM. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14fsi: master-gpio: Add external modeJeremy Kerr
This change introduces an 'external mode' for GPIO-based FSI masters, allowing the clock and data lines to be driven by an external source. For example, external mode is selected by a user when an external debug device is attached to the FSI pins. To do this, we need to set specific states for the trans, mux and enable GPIOs, and prevent access to clk & data from the FSI core code (by returning EBUSY). External mode is controlled by a sysfs attribute, so add the relevant information to Documentation/ABI/ Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-13f2fs: support hot file extensionChao Yu
This patch supports to recognize hot file extension in f2fs, so that we can allocate proper hot segment location for its data, which can lead to better hot/cold seperation in filesystem. In addition, we changes a bit on query/add/del operation method for extension_list sysfs entry as below: - Query: cat /sys/fs/f2fs/<disk>/extension_list - Add: echo 'extension' > /sys/fs/f2fs/<disk>/extension_list - Del: echo '!extension' > /sys/fs/f2fs/<disk>/extension_list - Add: echo '[h/c]extension' > /sys/fs/f2fs/<disk>/extension_list - Del: echo '[h/c]!extension' > /sys/fs/f2fs/<disk>/extension_list - [h] means add/del hot file extension - [c] means add/del cold file extension Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-03-13f2fs: expose extension_list sysfs entryChao Yu
This patch adds a sysfs entry 'extension_list' to support query/add/del item in extension list. Query: cat /sys/fs/f2fs/<device>/extension_list Add: echo 'extension' > /sys/fs/f2fs/<device>/extension_list Del: echo '!extension' > /sys/fs/f2fs/<device>/extension_list Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-03-09thunderbolt: Introduce USB only (SL4) security levelMika Westerberg
This new security level works so that it creates one PCIe tunnel to the connected Thunderbolt dock, removing PCIe links downstream of the dock. This leaves only the internal USB controller visible. Display Port tunnels are created normally. While there make sure security sysfs attribute returns "unknown" for any future security level. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Add support for preboot ACLMika Westerberg
Preboot ACL is a mechanism that allows connecting Thunderbolt devices boot time in more secure way than the legacy Thunderbolt boot support. As with the legacy boot option, this also needs to be enabled from the BIOS before booting is allowed. Difference to the legacy mode is that the userspace software explicitly adds device UUIDs by sending a special message to the ICM firmware. Only the devices listed in the boot ACL are connected automatically during the boot. This works in both "user" and "secure" security levels. We implement this in Linux by exposing a new sysfs attribute (boot_acl) below each Thunderbolt domain. The userspace software can then update the full list as needed. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Add 'boot' attribute for devicesYehezkel Bernat
In various cases, Thunderbolt device can be connected by ICM on boot without waiting for approval from user. Most cases are related to OEM-specific BIOS configurations. This information is interesting for user-space as if the device isn't in SW ACL, it may create a friction in the user experience where the device is automatically authorized if it's connected on boot but requires an explicit user action if connected after OS is up. User-space can use this information to suggest adding the device to SW ACL for auto-authorization on later connections. Signed-off-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-07HID: ntrig: document sysfs interfaceAishwarya Pant
Add sysfs documentation for N-Trig touchscreens under Documentation/ABI. Descriptions have been collected from code comments. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-06uio_hv_generic: support sub-channelsStephen Hemminger
Use sysfs to allow supporting sub-channels. The userspace application makes request to host to create sub-channels and the UIO kernel driver populates the sysfs per-channel directory with a binary attribute file that can be used to read/write ring. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-06HID: logitech-hidpp: document sysfs interfaceAishwarya Pant
Descriptions have been collected from git commit logs. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-02-28genirq: Add wakeup sysfs node to show IRQ wakeup stateAndy Shevchenko
Surprisingly there is no simple way to see if the IRQ line in question is wakeup source or not. Note that wakeup might be an OOB (out-of-band) source like GPIO line which makes things slightly more complicated. Add a sysfs node to cover this case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tony Lindgren <tony@atomide.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Link: https://lkml.kernel.org/r/20180226155043.67937-1-andriy.shevchenko@linux.intel.com
2018-02-26char/ipmi: add documentation for sysfs interfaceAishwarya Pant
This is an attempt to document the sysfs interface for the IPMI drivers. Descriptions were collected from v2.0 of the IPMI specification and from code comments. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-02-26Merge 4.16-rc3 into staging-nextGreg Kroah-Hartman
We want the IIO/Staging fixes in here, and to resolve a merge problem with the move of the fsl-mc code. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-23Documentation: rapidio: move sysfs interface to ABIAishwarya Pant
Right now, the description of the rapidio sysfs interfaces is in Documentation/rapidio/sysfs.txt. Since these are a part of the ABI, they should be in Documentation/ABI along with the rest. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-02-23backlight: adp8860: document sysfs attributesAishwarya Pant
Add documentation for sysfs interface of adp8860 series backlight devices by reading through code and git commits. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-02-23backlight: adp5520: document sysfs attributesAishwarya Pant
Add documentation for sysfs interface of adp5520/adp5501 analog devices backlight driver by reading code and looking through git commit logs. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-02-23backlight: lm3639: document sysfs attributesAishwarya Pant
Add documentation for sysfs interfaces of Texas Instruments lm3639 backlight + flash led driver chip by looking through git commits and reading code. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-02-23block/loop: add documentation for sysfs interfaceAishwarya Pant
Documentation has been compiled from git logs and by reading through code. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-02-23Documentation/ABI: update infiniband sysfs interfacesAishwarya Pant
Add documentation for core and hardware specific infiniband interfaces. The descriptions have been collected from git commit logs, reading through code and data sheets. Some drivers have incomplete doc and are annotated with the comment '[to be documented]'. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>