summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-03-25wifi: ath: Convert sprintf/snprintf to sysfs_emitLi Zhijian
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. coccinelle complains that there are still a couple of functions that use snprintf(). Convert them to sysfs_emit(). sprintf() will be converted as weel if they have. Generally, this patch is generated by make coccicheck M=<path/to/file> MODE=patch \ COCCI=scripts/coccinelle/api/device_attr_show.cocci No functional change intended CC: Kalle Valo <kvalo@kernel.org> CC: Jeff Johnson <jjohnson@kernel.org> CC: linux-wireless@vger.kernel.org CC: ath11k@lists.infradead.org CC: ath10k@lists.infradead.org Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240315055211.1347548-1-lizhijian@fujitsu.com
2024-03-21wifi: ath11k: remove duplicate definitions in wmi.hKang Yang
There are some duplicate definitions in wmi.h, remove them. No functional changes, compile tested only. Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240314021654.304451-1-quic_kangyang@quicinc.com
2024-03-21wifi: ath11k: do not process consecutive RDDM eventBaochen Qiang
Currently we do reset for each RDDM event from MHI, however there are cases, see below log, that we get two or more consecutive events, and it is pointless to do reset for the subsequent ones. What's more, it makes reset process more likely to fail. [ 1502.115876] ath11k_pci 0000:04:00.0: boot notify status reason MHI_CB_EE_RDDM [ 1502.115884] ath11k_pci 0000:04:00.0: firmware crashed: MHI_CB_EE_RDDM [ 1502.224041] ath11k_pci 0000:04:00.0: boot notify status reason MHI_CB_EE_RDDM [ 1502.224050] ath11k_pci 0000:04:00.0: firmware crashed: MHI_CB_EE_RDDM Add a check to avoid reset again and again. This is done by tracking previous MHI status: if we receive a new RDDM event while the previous one is also the same, we treat it as duplicate and ignore it, because normally we should receive a MHI_CB_EE_MISSION_MODE event between them. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111071406.14053-1-quic_bqiang@quicinc.com
2024-03-21wifi: ath12k: Refactor error handler of Rxdma replenishKarthikeyan Periyasamy
The Rxdma replenish handler currently contains redundant code in both the success and error cases. To avoid the redundant code, implement a conditional jump mechanism by placing a goto statement to prevent unnecessary execution of the error handling code when the operation is successful. This change streamline the code readability and enhance its efficiency. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240320010615.91331-4-quic_periyasa@quicinc.com
2024-03-21wifi: ath12k: Optimize the lock contention of used list in Rx data pathKarthikeyan Periyasamy
When a packet arrives in Rx rings, the RX descriptor moves from the used list to the free list. Then, the rxdma ring gets replenished, where the Rx descriptor again moves from the free list to the used list. At the end, the descriptor came to the used list with unnecessary list movement. The descriptor used list is maintained in the Rxdma ring structure, which creates lock contention for the list operations (add, delete) in the Rx data path. Optimize the Rx data path by removing the used list from the common Rxdma ring and maintain as a local variable in the Rx ring handler itself, which avoid lock contention. Now, to find the used list descriptor during descriptor cleanup, we need to check the in_use flag for each Rx descriptor. This is a simple UDP UL throughput test case results on x86+NUC device with QCN9274 card, which clearly shows 8% to 12% improvement in the CPU idle for the same ingress traffic. Before: Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle Average: all 0.24 0.00 12.54 0.08 0.00 23.33 0.00 0.00 0.00 63.81 After: Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle Average: all 0.34 0.00 4.60 0.00 0.00 19.59 0.00 0.00 0.00 75.47 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240320010615.91331-3-quic_periyasa@quicinc.com
2024-03-21wifi: ath12k: Refactor Rxdma buffer replinish argumentKarthikeyan Periyasamy
Currently, the Rxdma buffer replenish procedure implicitly retrieves the number of free entries when the caller passes req_entries as zero. This is helpful to replenishing the Rxdma ring when the caller is unaware of the number of entries to replenish. After the Rxdma ring is initialized, we can pass req_entries as zero to replenish all the free entry in the Rxdma ring. This change helps to align the argument req_entries to the used list entries for better code readability. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240320010615.91331-2-quic_periyasa@quicinc.com
2024-03-20wifi: ath12k: use correct flag field for 320 MHz channelsAloka Dixit
Due to an error during rebasing the patchset 320 MHz channel support got broken. ath12k was setting the QoS bit instead of the correct flag. WMI_PEER_EXT_320MHZ (0x2) is defined as an extended flag, replace peer_flags by peer_flags_ext while sending peer data. This affected both QCN9274 and WCN7850 which use the same flag. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: 6734cf9b4cc7 ("wifi: ath12k: peer assoc for 320 MHz") Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240314204651.11075-1-quic_alokad@quicinc.com
2024-03-20wifi: ath12k: remove duplicate definitions in wmi.hKang Yang
There are some duplicate definitions in wmi.h, remove them. No functional changes, compile tested only. Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240314021830.305021-1-quic_kangyang@quicinc.com
2024-03-20wifi: ath12k: fix desc address calculation in wbm tx completionThiraviyam Mariyappan
In tx completion, status desc is obtained from offsetting the address from wbm ring. Having HTT_TX_WBM_COMP_STATUS_OFFSET(8) and reserved 8 bytes in status desc offsets the address twice and read the values from the incorrect address. Hence, remove the HTT_TX_WBM_COMP_STATUS_OFFSET from wbm completion address calculation. Also this patch is applicable for WCN7850. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Thiraviyam Mariyappan <quic_tmariyap@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240311180708.9334-1-quic_tmariyap@quicinc.com
2024-03-14wifi: ath11k: advertise P2P dev support for QCA6390/WCN6855/QCA2066Kang Yang
Now that all the necessary pieces are implemented we can enable P2P support for QCA6390/WCN6855/QCA2066. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-7-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: change scan flag scan_f_filter_prb_req for QCA6390/WCN6855/QCA2066Kang Yang
Current ROC scan will filter probe request. So P2P device cannot receive probe request. But it is necessary for P2P mode. A P2P device cannot be discovered if it doesn't respond to others' probe request. In addition, station won't filter probe request with common scan. But for station, there is no needed to receive probe request. Based on the above two points, change scan flag scan_f_filter_prb_req for QCA6390/WCN6855/QCA2066. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-6-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: change WLAN_SCAN_PARAMS_MAX_IE_LEN from 256 to 512Kang Yang
Mac80211 needs more space for P2P scan ie in P2P mode, 256 is not enough, resize it to 512. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-5-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: implement handling of P2P NoA eventKang Yang
The NoA(Notice of Absence) attribute is used by the P2P Group Owner to signal its absence due to power save timing, concurrent operation, or off-channel scanning. It is also used in the P2P Presence Request-Response mechanism. The NoA attribute shall be present in the P2P IE in the beacon frames transmitted by a P2P Group Owner when a NoA schedule is being advertised, or when the CTWindow is non-zero. So add support to update P2P information after P2P GO is up through event WMI_P2P_NOA_EVENTID, and always put it in probe resp. Create p2p.c and p2p.h for P2P related functions and definitions. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-4-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: add P2P IE in beacon templateKang Yang
P2P Element is a necessary component of P2P protocol communication. It contains the Vendor Specific Information Element which includes the WFA OUI and an OUI Type indicating P2P. Add P2P IE in beacon template, and implement WMI interface for it. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-3-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: change interface combination for P2P modeKang Yang
Current interface combination doesn't support P2P mode. So change it for P2P mode. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-2-quic_kangyang@quicinc.com
2024-03-12wifi: ath11k: don't force enable power save on non-running vdevsBaochen Qiang
Currently we force enable power save on non-running vdevs, this results in unexpected ping latency in below scenarios: 1. disable power save from userspace. 2. trigger suspend/resume. With step 1 power save is disabled successfully and we get a good latency: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=5.13 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=5.45 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=5.99 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=6.34 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=4.47 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=6.45 ms While after step 2, the latency becomes much larger: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=17.7 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=15.0 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=14.3 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=16.5 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=20.1 ms The reason is, with step 2, power save is force enabled due to vdev not running, although mac80211 was trying to disable it to honor userspace configuration: ath11k_pci 0000:03:00.0: wmi cmd sta powersave mode psmode 1 vdev id 0 Call Trace: ath11k_wmi_pdev_set_ps_mode ath11k_mac_op_bss_info_changed ieee80211_bss_info_change_notify ieee80211_reconfig ieee80211_resume wiphy_resume This logic is taken from ath10k where it was added due to below comment: Firmware doesn't behave nicely and consumes more power than necessary if PS is disabled on a non-started vdev. However we don't know whether such an issue also occurs to ath11k firmware or not. But even if it does, it's not appropriate because it goes against userspace, even cfg/mac80211 don't know we have enabled it in fact. Remove it to fix this issue. In this way we not only get a better latency, but also, and the most important, keeps the consistency between userspace and kernel/driver. The biggest price for that would be the power consumption, which is not that important, compared with the consistency. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: b2beffa7d9a6 ("ath11k: enable 802.11 power save mode in station mode") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240309113115.11498-1-quic_bqiang@quicinc.com
2024-03-11wifi: ath11k: adjust a comment to reflect realityKevin Lo
On QCA6390/QCN9074/WCN6855, MHISTATUS may still have SYSERR bit set after SOC_GLOBAL_RESET. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/ZeWEqGVibkMg2APi@ns.kevlo.org
2024-03-08wifi: ath10k: poll service ready message before failingBaochen Qiang
Currently host relies on CE interrupts to get notified that the service ready message is ready. This results in timeout issue if the interrupt is not fired, due to some unknown reasons. See below logs: [76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received ... [76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110 And finally it causes WLAN interface bring up failure. Change to give it one more chance here by polling CE rings, before failing directly. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1 Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices") Reported-by: James Prestwood <prestwoj@gmail.com> Tested-By: James Prestwood <prestwoj@gmail.com> # on QCA6174 hw3.2 Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/ Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com
2024-03-08wifi: ath11k: fix soc_dp_stats debugfs file permissionJeff Johnson
Currently the soc_dp_stats debugfs file has the following permissions: # ls -l /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats -rw------- 1 root root 0 Mar 4 15:04 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats However this file does not actually support write operations -- no .write() method is registered. Therefore use the correct permissions when creating the file. After the change: # ls -l /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats -r-------- 1 root root 0 Mar 4 15:15 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240305-fix-soc_dp_stats-permission-v1-1-2ec10b42f755@quicinc.com
2024-03-08wifi: ath11k: remove obsolete struct wmi_start_scan_argJeff Johnson
ath11k inherited struct wmi_start_scan_arg from ath10k. However, in ath11k, this struct is unused -- struct scan_req_params is used for this functionality. So remove the unused struct. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240226-ath11k-obsolete-wmi_start_scan_arg-v1-1-c0b94c6e191d@quicinc.com
2024-03-08wifi: ath12k: remove obsolete struct wmi_start_scan_argJeff Johnson
ath12k inherited struct wmi_start_scan_arg from ath11k. However, in ath12k, this struct is unused -- struct ath12k_wmi_scan_req_arg is used for this functionality. So remove the unused struct. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240226-ath12k-obsolete-wmi_start_scan_arg-v1-1-07b0b563cb27@quicinc.com
2024-03-05Merge tag 'ath-next-20240305' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath ath.git patches for v6.9 Only some minor cleanup in ath11k and ath12k. Adding Jeff as the maintainer for ath10k, ath11k and ath12k DT bindings.
2024-03-05wifi: rtw89: wow: move release offload packet earlier for WoWLAN modeChin-Yen Lee
Now WoWLAN firmware will disable PCIE DMA after driver call cfg_wake function, and it will lead to release offload packet fail because driver can't receive completion notification from firmware. We move release offload packet earlier to avoid this error. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-8-pkshih@realtek.com
2024-03-05wifi: rtw89: wow: set security engine options for 802.11ax chips onlyChin-Yen Lee
The security engine is set for management frames by default for 802.11be chips, so no need to set it in WoWLAN flow. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-7-pkshih@realtek.com
2024-03-05wifi: rtw89: update suspend/resume for different generationChin-Yen Lee
The setting during suspend or resume is different between different generation, so update it. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-6-pkshih@realtek.com
2024-03-05wifi: rtw89: wow: update config mac function with different generationChin-Yen Lee
The registers to configure mac function for WoWLAN mode that are different from different generation, so update them. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-5-pkshih@realtek.com
2024-03-05wifi: rtw89: update DMA function with different generationChin-Yen Lee
The register of control and polling function for TX/RX DMA is different from different generation, so update them. Also rename polling_dma function to polling_dma_idle to avoid misunderstanding. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-4-pkshih@realtek.com
2024-03-05wifi: rtw89: wow: update WoWLAN status register for different generationChin-Yen Lee
The statue register is for driver to check if WoWLAN mode works or stops successfully. It is changed for new generation, so update it. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-3-pkshih@realtek.com
2024-03-05wifi: rtw89: wow: update WoWLAN reason register for different chipsChin-Yen Lee
The WoWLAN reason register is used for driver to get the wakeup reason for reporting to cfg80211, and it is different from chips. So put it into chip information. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-2-pkshih@realtek.com
2024-03-05wifi: brcm80211: handle pmk_op allocation failureDuoming Zhou
The kzalloc() in brcmf_pmksa_v3_op() will return null if the physical memory has run out. As a result, if we dereference the null value, the null pointer dereference bug will happen. Return -ENOMEM from brcmf_pmksa_v3_op() if kzalloc() fails for pmk_op. Fixes: a96202acaea4 ("wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations") Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229103153.18533-1-duoming@zju.edu.cn
2024-03-05wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERRChing-Te Ku
The 2 Bluetooth profiles (Hands free profile & Human interface device) have high duty transmission, it will affect the traffic of WiFi packet frequently. And once the WiFi traffic down to B/G mode, it will need a better success rate to recover the transmission rate. Add new policy option to solve the above situation. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-9-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: When Bluetooth not available don't set power/gainChing-Te Ku
If Bluetooth is working, it will update their info regularly. And the code will increase the counters while the info updating. Use this counter to judge is Bluetooth working or not. Don't need to set Bluetooth power or gain when it is not working. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-8-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: add return value to ensure H2C command is success or notChing-Te Ku
Add return value to H2C function, and only record down the value while H2C command success, this can help us to check the real time status. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-7-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: Reorder H2C command index to align with firmwareChing-Te Ku
Wi-Fi firmware need some driver information to do decision or do some real-time control. Driver will update these information by H2C command. The chip 8922a H2C command index is different from before chips/branch, so need to assign the correct index to let firmware parsing. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-6-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: add BTC ctrl_info version 7 and related logicChing-Te Ku
Change structure member from bit field to normal variable to reduce unnecessary translation. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-5-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: add init_info H2C command format version 7Ching-Te Ku
To avoid using bit fields for H2C command, rearrange the structure. And also patch the corresponding code for the using of this structure. No logic changes for existing chips. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-4-pkshih@realtek.com
2024-03-05wifi: rtw89: 8922a: add coexistence helpers of SW grantPing-Ke Shih
Under some circumstances, coexistence mechanism want to keep grant BT or WiFi, such as inquiry and WiFi is connecting, to ensure BT or WiFi can transmit or receive data in that period. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-3-pkshih@realtek.com
2024-03-05wifi: rtw89: mac: add coexistence helpers {cfg/get}_pltPing-Ke Shih
When hardware grant BT initially but transition to grant WiFi, the PLT (polluted) bit is set to assist coexistence mechanism to debug if grant signal is expected. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-2-pkshih@realtek.com
2024-03-05wifi: cw1200: restore endian swappingJohannes Berg
The code here looks well thought-out, so it seems likely that the byte-swaps are actually needed, due to SPI bus and device behaviour. Restore the byte-swapping, in a way that doesn't result in sparse warnings. Fixes: 7ceade653429 ("wifi: cw1200: fix __le16 sparse warnings") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240228121156.62f820aa6dfb.Ia63314e4d0ed1ee76f100846d68f0722abf6b793@changeid
2024-03-05wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warnsJavier Martinez Canillas
When these failures happen, the warning and call trace is printed which is excessive. Instead, just print the error but rate limited to prevent warns to unnecessarily pollute the kernel log buffer and make the serial console practically unusable. For example, on an AM625 BeaglePlay board where accessing a SDIO WiFi chip fails with an -110 (ETIMEDOUT) error: $ dmesg | grep "sdio write\|read failed (-110)" | wc -l 39 Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240228101042.728881-1-javierm@redhat.com
2024-03-05wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byteBitterblue Smith
PCI drivers and USB drivers can both use the same function, read_efuse_byte(), and they can call it directly. rtl8192de was the only user. Tested only with the upcoming rtl8192du driver. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/4e2c968d-f25c-4a40-be97-4fdcbdde69cf@gmail.com
2024-03-05wifi: rtw88: 8821c: Fix false alarm countBitterblue Smith
total_fa_cnt is supposed to include cck_fa_cnt and ofdm_fa_cnt, not just ofdm_fa_cnt. Fixes: 960361238b86 ("rtw88: 8821c: add false alarm statistics") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/f3cb6d17-e4e4-44a7-9c9b-72aed994b5c9@gmail.com
2024-03-05wifi: rtw88: 8821c: Fix beacon loss and disconnectBitterblue Smith
Tenda U9 V2.0, which contains RTL8811CU, is practically unusable because of frequent disconnections: Feb 23 14:46:45 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS Feb 23 14:46:46 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED bssid=90:55:de:__:__:__ reason=4 locally_generated=1 Feb 23 14:46:52 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED - Connection to 90:55:de:__:__:__ completed [id=0 id_str=] Feb 23 14:46:54 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS Feb 23 14:46:55 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED bssid=90:55:de:__:__:__ reason=4 locally_generated=1 Feb 23 14:47:01 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED - Connection to 90:55:de:__:__:__ completed [id=0 id_str=] Feb 23 14:47:04 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS Feb 23 14:47:05 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED bssid=90:55:de:__:__:__ reason=4 locally_generated=1 This is caused by a mistake in the chip initialisation. This version of the chip requires loading an extra AGC table right after the main one, but the extra table is being loaded at the wrong time, in rtw_chip_board_info_setup(). Move the extra AGC table loading to the right place, in rtw_phy_load_tables(). The rtw_chip_board_info_setup() can only do "software" things, and rtw_phy_load_tables() can really do IO. Fixes: 5d6651fe8583 ("rtw88: 8821c: support RFE type2 wifi NIC") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/276c31d8-b9a8-4e54-a3ac-09b74657aff7@gmail.com
2024-03-05wifi: rtw88: 8821cu: Fix connection failureBitterblue Smith
Clear bit 8 of REG_SYS_STATUS1 after MAC power on. Without this, some RTL8821CU and RTL8811CU cannot connect to any network: Feb 19 13:33:11 ideapad2 kernel: wlp3s0f3u2: send auth to 90:55:de:__:__:__ (try 1/3) Feb 19 13:33:13 ideapad2 kernel: wlp3s0f3u2: send auth to 90:55:de:__:__:__ (try 2/3) Feb 19 13:33:14 ideapad2 kernel: wlp3s0f3u2: send auth to 90:55:de:__:__:__ (try 3/3) Feb 19 13:33:15 ideapad2 kernel: wlp3s0f3u2: authentication with 90:55:de:__:__:__ timed out The RTL8822CU and RTL8822BU out-of-tree drivers do this as well, so do it for all three types of chips. Tested with RTL8811CU (Tenda U9 V2.0). Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/aeeefad9-27c8-4506-a510-ef9a9a8731a4@gmail.com
2024-03-05wifi: rtw88: 8821cu: Fix firmware upload failBitterblue Smith
RTL8822CU, RTL8822BU, and RTL8821CU need an extra register write after reading and writing certain addresses. Without this, the firmware upload fails approximately more than 50% of the time. Tested with RTL8811CU (Tenda U9 V2.0) which is the same as RTL8821CU but without Bluetooth. Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/f12ed39d-28e8-4b8b-8d22-447bcf295afc@gmail.com
2024-03-05wifi: rtw88: Add missing VID/PIDs for 8811CU and 8821CUNick Morrow
Add VID/PIDs that are known to be missing for this driver. Removed /* 8811CU */ and /* 8821CU */ as they are redundant since the file is specific to those chips. Removed /* TOTOLINK A650UA v3 */ as the manufacturer. It has a REALTEK VID so it may not be specific to this adapter. Verified and tested. Cc: stable@vger.kernel.org Signed-off-by: Nick Morrow <morrownr@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/4ume7mjw63u7.XlMUvUuacW2ErhOCdqlLkw2@1EHFQ.trk.elasticemail.com
2024-03-04wifi: mac80211: remove TDLS peers on link deactivationJohannes Berg
If a link is deactivated, we really cannot sustain any TDLS connections on that link any more. With the API now changed, fix this issue and remove TDLS connections. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://msgid.link/20240228095719.a7dd812c37bf.I3474dbde79e9e7a539d47f6f81f32e6c3e459080@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: mac80211: remove TDLS peers only on affected linkJohannes Berg
If a link does CSA, or if it changes SMPS mode, we need to drop the TDLS peers, but we really should drop them only on the affected link. Fix that. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://msgid.link/20240228095719.00d1d793f5b8.Ia9971316c6b3922dd371d64ac2198f91ed5ad9d2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: mac80211: mlme: unify CSA handlingJohannes Berg
Unify all the CSA handling, including handling of a beacon after the CSA, into ieee80211_sta_process_chanswitch(). The CRC of the beacon will change due to changes in the CSA/ECSA elements, so there's really no need to have the 'beacon after CSA' handling before the CRC processing or to change the beacon_crc_valid value here. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240228095719.e269c0e02905.I9dc68ff1e84d51349822bc7d3b33b578fcf8e360@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: mac80211: introduce a feature flag for quiet in CSAJohannes Berg
When doing CSA in multi-link, there really isn't a need to stop transmissions entirely. Add a feature flag for drivers to indicate they can handle quiet in CSA (be it by parsing themselves, or by implementing drv_pre_channel_switch()), to make that possible. Also clean up the csa_block_tx handling: it clearly cannot handle multi-link due to the way queues are stopped, move it to the sdata. Drivers should be doing it themselves for working properly during CSA in MLO anyway. Also rename it to indicate that it reflects TX was blocked at mac80211. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240228095719.258439191541.I2469d206e2bf5cb244cfde2b4bbc2ae6d1cd3dd9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-26 05:56:07 +0000