| Age | Commit message (Collapse) | Author |
|---|
|
TPM2B buffers, or sized buffers, have a two byte header, which contains the
length of the payload as a 16-bit big-endian number, without counting in
the space taken by the header. This differs from encoding in the TPM header
where the length includes also the bytes taken by the header.
Unbound the length of a tpm_buf from the value stored to the TPM command
header. A separate encoding and decoding step so that different buffer
types can be supported, with variant header format and length encoding.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Remove deprecated portions and document enum values.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
separate out the tpm_buf_... handling functions from static inlines in
tpm.h and move them to their own tpm-buf.c file. This is a precursor
to adding new functions for other TPM type handling because the amount
of code will grow from the current 70 lines in tpm.h to about 200
lines when the additions are done. 200 lines of inline functions is a
bit too much to keep in a header file.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Open code the last remaining call site for tpm_send().
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The helper function has no call sites. Thus, remove it.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The recent change to handle HAS_IOPORT removed the TPM_INF_IO_PORT
define for the HAS_IOPORT=n case despite the define being used in
sections of code not covered by the same ifdef check. This was missed
because at the moment TCG_INFINEON indirectly depends on HAS_IOPORT via
PNP which depends on ACPI || ISA. As TCG_INFINEON does in principle
support MMIO only use add it for COMPILE_TEST to cover the HAS_IOPORT=n
case.
Link: https://lore.kernel.org/lkml/9d9fa267-067e-421b-9a39-aa178b913298@app.fastmail.com/
Fixes: dab56f80e7f9 ("char: tpm: handle HAS_IOPORT dependencies")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Add the ST chip st33ktpm2xi2c to the supported compatible strings of the
TPM TIS I2C schema. The Chip is compliant with the TCG PC Client TPM
Profile specification.
For reference, a datasheet is available at:
https://www.st.com/resource/en/data_brief/st33ktpm2xi2c.pdf
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Michael Haener <michael.haener@siemens.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Based recent discussions on LKML, provide preliminary bits of tpm_tis_core
dependent drivers. Includes only bare essentials but can be extended later
on case by case. This way some people may even want to read it later on.
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Variable ret is being assigned and error code that is never read, it is
either being re-assigned in an error exit path or never referenced again
on the non-error path. The assignment is redundant and can be removed.
Cleans up clang scan build warning:
drivers/char/tpm/eventlog/acpi.c:145:2: warning: Value stored to 'ret'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add this dependency and ifdef sections of
code using inb()/outb() as alternative access methods.
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Pull smb server fixes from Steve French:
"Five ksmbd server fixes, all also for stable
- Three fixes related to SMB3 leases (fixes two xfstests, and a
locking issue)
- Unitialized variable fix
- Socket creation fix when bindv6only is set"
* tag '6.9-rc7-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: do not grant v2 lease if parent lease key and epoch are not set
ksmbd: use rwsem instead of rwlock for lease break
ksmbd: avoid to send duplicate lease break notifications
ksmbd: off ipv6only for both ipv4/ipv6 binding
ksmbd: fix uninitialized symbol 'share' in smb2_tree_connect()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Two one-liner fixes for issues introduced in -rc1"
* tag 'fuse-fixes-6.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtiofs: include a newline in sysfs tag
fuse: verify zero padding in fuse_backing_map
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Fix xfstests generic/013 test failure with dirsync mount option
- Initialize the reserved fields of deleted file and stream extension
dentries to zero
* tag 'exfat-for-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: zero the reserved fields of file and stream extension dentries
exfat: fix timing of synchronizing bitmap and inode
|
|
Pull bcachefs fixes from Kent Overstreet:
- Various syzbot fixes; mainly small gaps in validation
- Fix an integer overflow in fiemap() which was preventing filefrag
from returning the full list of extents
- Fix a refcounting bug on the device refcount, turned up by new
assertions in the development branch
- Fix a device removal/readd bug; write_super() was repeatedly dropping
and retaking bch_dev->io_ref references
* tag 'bcachefs-2024-05-07.2' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Add missing sched_annotate_sleep() in bch2_journal_flush_seq_async()
bcachefs: Fix race in bch2_write_super()
bcachefs: BCH_SB_LAYOUT_SIZE_BITS_MAX
bcachefs: Add missing skcipher_request_set_callback() call
bcachefs: Fix snapshot_t() usage in bch2_fs_quota_read_inode()
bcachefs: Fix shift-by-64 in bformat_needs_redo()
bcachefs: Guard against unknown k.k->type in __bkey_invalid()
bcachefs: Add missing validation for superblock section clean
bcachefs: Fix assert in bch2_alloc_v4_invalid()
bcachefs: fix overflow in fiemap
bcachefs: Add a better limit for maximum number of buckets
bcachefs: Fix lifetime issue in device iterator helpers
bcachefs: Fix bch2_dev_lookup() refcounting
bcachefs: Initialize bch_write_op->failed in inline data path
bcachefs: Fix refcount put in sb_field_resize error path
bcachefs: Inodes need extra padding for varint_decode_fast()
bcachefs: Fix early error path in bch2_fs_btree_key_cache_exit()
bcachefs: bucket_pos_to_bp_noerror()
bcachefs: don't free error pointers
bcachefs: Fix a scheduler splat in __bch2_next_write_buffer_flush_journal_buf()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of last minute fixes that came in over the previous
week, addressing:
- A pin configuration bug on a qualcomm board that caused issues with
ethernet and mmc
- Two minor code fixes for misleading console output in the microchip
firmware driver
- A build warning in the sifive cache driver"
* tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: microchip: clarify that sizes and addresses are in hex
firmware: microchip: don't unconditionally print validation success
arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
cache: sifive_ccache: Silence unused variable warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Update kernel-parameters doc to describe "pcie_aspm=off" more
accurately (Bjorn Helgaas)
- Restore the parent's (not the child's) ASPM state to the parent
during resume, which fixes a reboot during resume (Kai-Heng Feng)
* tag 'pci-v6.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Restore parent state to parent, child state to child
PCI/ASPM: Clarify that pcie_aspm=off means leave ASPM untouched
|
|
The internal tag string doesn't contain a newline. Append one when
emitting the tag via sysfs.
[Stefan] Orthogonal to the newline issue, sysfs_emit(buf, "%s", fs->tag) is
needed to prevent format string injection.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Fixes: a8f62f50b4e4 ("virtiofs: export filesystem tags through sysfs")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_write_super() was looping over online devices multiple times -
dropping and retaking io_ref each time.
This meant it could race with device removal; it could increment the
sequence number on a device but fail to write it - and then if the
device was re-added, it would get confused the next time around thinking
a superblock write was silently dropped.
Fix this by taking io_ref once, and stashing pointers to online devices
in a darray.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
One more Qualcomm Arm64 DeviceTree fix for v6.9
On ths SA8155P automotive platform, the wrong gpio controller is defined
for the SD-card detect pin, which depending on probe ordering of things
cause ethernet to be broken. The card detect pin reference is corrected
to solve this problem.
* tag 'qcom-arm64-fixes-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
Link: https://lore.kernel.org/r/20240427153817.1430382-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two more fixes, both have some visible effects on user space:
- add check if quotas are enabled when passing qgroup inheritance
info, this affects snapper that could fail to create a snapshot
- do check for leaf/node flag WRITTEN earlier so that nodes are
completely validated before access, this used to be done by
integrity checker but it's been removed and left an unhandled case"
* tag 'for-6.9-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: make sure that WRITTEN is set on all metadata blocks
btrfs: qgroup: do not check qgroup inherit if qgroup is disabled
|
|
This reverts commit 07ed11afb68d94eadd4ffc082b97c2331307c5ea.
Stephen Rostedt reports:
"I went to run my tests on my VMs and the tests hung on boot up.
Unfortunately, the most I ever got out was:
[ 93.607888] Testing event system initcall: OK
[ 93.667730] Running tests on all trace events:
[ 93.669757] Testing all events: OK
[ 95.631064] ------------[ cut here ]------------
Timed out after 60 seconds"
and further debugging points to a possible circular locking dependency
between the console_owner locking and the worker pool locking.
Reverting the commit allows Steve's VM to boot to completion again.
[ This may obviously result in the "[TTM] Buffer eviction failed"
messages again, which was the reason for that original revert. But at
this point this seems preferable to a non-booting system... ]
Reported-and-bisected-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/all/20240502081641.457aa25f@gandalf.local.home/
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Alex Constantino <dreaming.about.electric.sheep@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Timo Lindfors <timo.lindfors@iki.fi>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There's a typo that makes parent device uses child LNKCTL value and vice
versa. This causes Micron NVMe to trigger a reboot upon system resume.
Correct the typo to fix the issue.
Fixes: 64dbb2d70744 ("PCI/ASPM: Disable L1 before configuring L1 Substates")
Link: https://lore.kernel.org/r/20240506051602.1990743-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[bhelgaas: update subject]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Fix for cleanup infrastructure (Dan Carpenter)
This makes the __free(kfree) cleanup hooks not crash on error
pointers.
- SLUB fix for freepointer checking (Nicolas Bouchinet)
This fixes a recently introduced bug that manifests when
init_on_free, CONFIG_SLAB_FREELIST_HARDENED and consistency checks
(slub_debug=F) are all enabled, and results in false-positive
freepointer corrupt reports for caches that store freepointer outside
of the object area.
* tag 'slab-for-6.9-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: make __free(kfree) accept error pointers
mm/slub: avoid zeroing outside-object freepointer for single free
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay
Pull auxdisplay fixes from Andy Shevchenko:
- A couple of non-critical build fixes to Character LCD library
- Miscellaneous fixes here and there
* tag 'auxdisplay-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay:
auxdisplay: charlcd: Don't rebuild when CONFIG_PANEL_BOOT_MESSAGE=y
auxdisplay: charlcd: Add missing MODULE_DESCRIPTION()
auxdisplay: seg-led-gpio: Convert to platform remove callback returning void
auxdisplay: linedisp: Group display drivers together
|
|
Define a constant for the max superblock size, to avoid a too-large
shift.
Reported-by: syzbot+a8b0fb419355c91dda7f@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_fs_quota_read_inode() wasn't entirely updated to the
bch2_snapshot_tree() helper, which takes rcu lock.
Reported-by: syzbot+a3a9a61224ed3b7f0010@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Ancient versions of bcachefs produced packed formats that could
represent keys that our in memory format cannot represent;
bformat_needs_redo() has some tricky shifts to check for this sort of
overflow.
Reported-by: syzbot+594427aebfefeebe91c6@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
For forwards compatibility we have to allow unknown key types, and only
run the checks that make sense against them.
Fix a missing guard on k.k->type being known.
Reported-by: syzbot+ae4dc916da3ce51f284f@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We were forgetting to check for jset entries that overrun the end of the
section - both in validate and to_text(); to_text() needs to be safe for
types that fail to validate.
Reported-by: syzbot+c48865e11e7e893ec4ab@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+10827fa6b176e1acf1d0@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
filefrag (and potentially other utilities that call fiemap) sometimes
pass ULONG_MAX as the length. fiemap_prep clamps excessively large
lengths - but the calculation of end can overflow if it occurs before
calling fiemap_prep. When this happens, filefrag assumes it has read to
the end and exits.
Signed-off-by: Reed Riley <reed@riley.engineer>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The bucket_gens array is a single array allocation (one byte per
bucket), and kernel allocations are still limited to INT_MAX.
Check this limit to avoid failing the bucket_gens array allocation.
Reported-by: syzbot+b29f436493184ea42e2b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_get_next_dev() and bch2_get_next_online_dev() iterate over devices,
dropping and taking refs as they go; we can't access the previous device
(for ca->dev_idx) after we've dropped our ref to it, unless we take
rcu_read_lock() first.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_dev_lookup() is supposed to take a ref on the device it returns, but
for_each_member_device() takes refs as it iterates,
for_each_member_device_rcu() does not.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Normally this is initialized in __bch2_write(), which is executed in a
loop, but the inline data path skips this.
Reported-by: syzbot+fd3ccb331eb21f05d13b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+66b9b74f6520068596a9@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+a35cdb62ec34d44fb062@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't want the assert when we're checking if the backpointer is
valid.
Reported-by: syzbot+bf7215c0525098e7747a@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+3333603f569fc2ef258c@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're using mutex_lock() inside a wait_event() conditional -
prepare_to_wait() has already flipped task state, so potentially
blocking ops need annotation.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
|
|
epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.
Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.
Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/
Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix error logging and check user-supplied data when injecting an
error in the versal EDAC driver
* tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versal: Do not log total error counts
EDAC/versal: Check user-supplied data before injecting an error
EDAC/versal: Do not register for NOC errors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix incorrect delay handling in the plpks (keystore) code
- Fix a panic when an LPAR boots with a frozen PE
Thanks to Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, and Nayna
Jain.
* tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE
powerpc/pseries: make max polling consistent for longer H_CALLs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Remove the broken vsyscall emulation code from
the page fault code
- Fix kexec crash triggered by certain SEV RMP
table layouts
- Fix unchecked MSR access error when disabling
the x2APIC via iommu=off
* tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove broken vsyscall emulation code from the page fault code
x86/apic: Don't access the APIC when disabling x2APIC
x86/sev: Add callback to apply RMP table fixups for kexec
x86/e820: Add a new e820 table update helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix suspicious RCU usage in __do_softirq()"
* tag 'irq-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
softirq: Fix suspicious RCU usage in __do_softirq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes and new device ids
for 6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems"
* tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
slimbus: qcom-ngd-ctrl: Add timeout for wait operation
dyndbg: fix old BUG_ON in >control parser
misc/pvpanic-pci: register attributes via pci_driver
fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
mei: me: add lunar lake point M DID
mei: pxp: match against PCI_CLASS_DISPLAY_OTHER
iio:imu: adis16475: Fix sync mode setting
iio: accel: mxc4005: Reset chip on probe() and resume()
iio: accel: mxc4005: Interrupt handling fixes
dt-bindings: iio: health: maxim,max30102: fix compatible check
iio: pressure: Fixes SPI support for BMP3xx devices
iio: pressure: Fixes BME280 SPI driver data
|
