summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-19rtlwifi: Replace old-style license informationLarry Finger
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19Merge tag 'mt76-for-kvalo-2019-02-18' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 5.1 * beacon support for USB devices (mesh+ad-hoc only) * mt76x0 tx power fixes * fixes for encryption, calibration and ED/CCA * more code unification * USB fixes * fix for using the correct hweight8 function
2019-02-18mt76: mt76x2: simplify per-chain signal strength handlingFelix Fietkau
There is no need to use a for loop here, supported chips can only support up to 2 chains. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: fix resetting software IV flag on key deleteFelix Fietkau
It needs to be unset instead of set Fixes: 23405236460b9 ("mt76: fix transmission of encrypted management frames") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: fix corrupted software generated tx CCMP PNFelix Fietkau
Since ccmp_pn is u8 *, the second half needs to start at array index 4 instead of 0. Fixes a connection stall after a certain amount of traffic Fixes: 23405236460b9 ("mt76: fix transmission of encrypted management frames") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: fix tx status timeout processingFelix Fietkau
Remove bogus check for MT_PACKET_ID_NO_ACK in mt76_tx_status_skb_get, which is already handled in callers and turns timeout calls into no-ops Do not clean up pending status items on reordering of tx status information if the timeout is not reached yet Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: Use the correct hweight8() functionBen Hutchings
mt76_init_stream_cap() and mt76_get_txpower() call __sw_hweight8() directly, but that's only defined if CONFIG_GENERIC_HWEIGHT is enabled. The function that works on all architectures is hweight8(). Fixes: 551e1ef4d291 ("mt76: add mt76_init_stream_cap routine") Fixes: 9313faacbb4e ("mt76: move mt76x02_get_txpower to mt76 core") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02u: remove bogus check and comment paddingStanislaw Gruszka
In mt76x02u_skb_dma_info() pad is always non-zero. Patch removes bogus check and add comments to the function. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: usb: use dev_err_ratelimited instead of dev_err in mt76u_complete_rxLorenzo Bianconi
During device removal the driver can report multiple error messages. Use dev_err_ratelimited instead of dev_err to display urb errors Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: usb: introduce disable_usb_sg parameterLorenzo Bianconi
Add disable_usb_sg module parameter to disable scatter-gather on demand Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: usb: use a linear buffer for tx/rx datapath if sg is not supportedLorenzo Bianconi
Use linear fragment and not a single usb scatter-gather buffer in mt76u {tx,rx} datapath if the usb controller has sg data length constraints Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: usb: do not use sg buffers for mcu messagesLorenzo Bianconi
Do not use scatter-gather buffers for mcu commands. Introduce mt76u_buf_alloc and mt76u_buf_alloc_sg routines. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: usb: move mt76u_check_sg in usb.cLorenzo Bianconi
Move mt76u_check_sg routine in usb.c and introduce sg_en variable in mt76_usb in order to check if scatter-gather is supported by mt76u layer Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: usb: do not run mt76u_queues_deinit twiceLorenzo Bianconi
Do not call mt76u_queues_deinit routine in mt76u_alloc_queues error path since it will be run in mt76x0u_register_device or mt76x2u_register_device error path. Current implementation triggers the following kernel warning: [ 67.005516] WARNING: CPU: 2 PID: 761 at lib/refcount.c:187 refcount_sub_and_test_checked+0xa4/0xb8 [ 67.019513] refcount_t: underflow; use-after-free. [ 67.099872] Hardware name: BCM2835 [ 67.106268] Backtrace: [ 67.111584] [<8010c91c>] (dump_backtrace) from [<8010cc00>] (show_stack+0x20/0x24) [ 67.124974] r6:60000013 r5:ffffffff r4:00000000 r3:a50bade6 [ 67.132226] [<8010cbe0>] (show_stack) from [<807ca5f4>] (dump_stack+0xc8/0x114) [ 67.141225] [<807ca52c>] (dump_stack) from [<8011e65c>] (__warn+0xf4/0x120) [ 67.149849] r9:000000bb r8:804d0138 r7:00000009 r6:8099dc84 r5:00000000 r4:b66c7b58 [ 67.160767] [<8011e568>] (__warn) from [<8011e6d0>] (warn_slowpath_fmt+0x48/0x50) [ 67.171436] r9:7f65e128 r8:80d1419c r7:80c0bac4 r6:b97b3044 r5:b7368e00 r4:00000000 [ 67.182433] [<8011e68c>] (warn_slowpath_fmt) from [<804d0138>] (refcount_sub_and_test_checked+0xa4/0xb8) [ 67.195221] r3:80c91c25 r2:8099dc94 [ 67.200370] r4:00000000 [ 67.204397] [<804d0094>] (refcount_sub_and_test_checked) from [<804d0164>] (refcount_dec_and_test_checked+0x18/0x1c) [ 67.218046] r4:b7368e00 r3:00000001 [ 67.223125] [<804d014c>] (refcount_dec_and_test_checked) from [<805db49c>] (usb_free_urb+0x20/0x4c) [ 67.235358] [<805db47c>] (usb_free_urb) from [<7f639804>] (mt76u_buf_free+0x98/0xac [mt76_usb]) [ 67.247302] r4:00000001 r3:00000001 [ 67.252468] [<7f63976c>] (mt76u_buf_free [mt76_usb]) from [<7f639ef8>] (mt76u_queues_deinit+0x44/0x100 [mt76_usb]) [ 67.266102] r8:b8fe8600 r7:b5dac480 r6:b5dace20 r5:00000001 r4:00000000 r3:00000080 [ 67.277132] [<7f639eb4>] (mt76u_queues_deinit [mt76_usb]) from [<7f65c040>] (mt76x0u_cleanup+0x40/0x4c [mt76x0u]) [ 67.290737] r7:b5dac480 r6:b8fe8600 r5:ffffffea r4:b5dace20 [ 67.298069] [<7f65c000>] (mt76x0u_cleanup [mt76x0u]) from [<7f65c564>] (mt76x0u_probe+0x1f0/0x354 [mt76x0u]) [ 67.311174] r4:b5dace20 r3:00000000 [ 67.316312] [<7f65c374>] (mt76x0u_probe [mt76x0u]) from [<805e0b6c>] (usb_probe_interface+0x104/0x240) [ 67.328915] r7:00000000 r6:7f65e034 r5:b6634800 r4:b8fe8620 [ 67.336276] [<805e0a68>] (usb_probe_interface) from [<8056a8bc>] (really_probe+0x224/0x2f8) [ 67.347965] r10:b65f0a00 r9:00000019 r8:7f65e034 r7:80d3e124 r6:00000000 r5:80d3e120 [ 67.359175] r4:b8fe8620 r3:805e0a68 [ 67.364384] [<8056a698>] (really_probe) from [<8056ab60>] (driver_probe_device+0x6c/0x180) [ 67.375974] r10:b65f0a00 r9:7f65e2c0 r8:b8fe8620 r7:00000000 r6:7f65e034 r5:7f65e034 [ 67.387170] r4:b8fe8620 r3:00000000 [ 67.392378] [<8056aaf4>] (driver_probe_device) from [<8056ad54>] (__driver_attach+0xe0/0xe4) [ 67.404097] r9:7f65e2c0 r8:7f65d22c r7:00000000 r6:b8fe8654 r5:7f65e034 r4:b8fe8620 [ 67.415122] [<8056ac74>] (__driver_attach) from [<8056880c>] (bus_for_each_dev+0x68/0xa0) [ 67.426628] r6:8056ac74 r5:7f65e034 r4:00000000 r3:00000027 [ 67.434017] [<805687a4>] (bus_for_each_dev) from [<8056a1cc>] (driver_attach+0x28/0x30) [ 67.445394] r6:80c6ddc8 r5:b7368f80 r4:7f65e034 [ 67.451703] [<8056a1a4>] (driver_attach) from [<80569c24>] (bus_add_driver+0x194/0x21c) [ 67.463081] [<80569a90>] (bus_add_driver) from [<8056b504>] (driver_register+0x8c/0x124) [ 67.474560] r7:80c6ddc8 r6:7f65e034 r5:00000000 r4:7f65e034 [ 67.481964] [<8056b478>] (driver_register) from [<805df510>] (usb_register_driver+0x74/0x140) [ 67.493901] r5:00000000 r4:7f65e000 [ 67.499131] [<805df49c>] (usb_register_driver) from [<7f661024>] (mt76x0_driver_init+0x24/0x1000 [mt76x0u]) [ 67.512258] r9:00000001 r8:7f65e308 r7:00000000 r6:80c08d48 r5:7f661000 r4:7f65e2c0 [ 67.523404] [<7f661000>] (mt76x0_driver_init [mt76x0u]) from [<80102f6c>] (do_one_initcall+0x4c/0x210) [ 67.536142] [<80102f20>] (do_one_initcall) from [<801ae63c>] (do_init_module+0x6c/0x21c) [ 67.547639] r8:7f65e308 r7:80c08d48 r6:b65f0ac0 r5:7f65e2c0 r4:7f65e2c0 [ 67.556129] [<801ae5d0>] (do_init_module) from [<801ad68c>] (load_module+0x1d10/0x2304) Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: usb: fix possible memory leak in mt76u_buf_freeLorenzo Bianconi
Move q->ndesc initialization before the for loop in mt76u_alloc_rx since otherwise allocated urbs will not be freed in mt76u_buf_free Double-check scatterlist pointer in mt76u_buf_free Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: usb: fix possible NULL pointer dereference in mt76u_mcu_deinitLorenzo Bianconi
Fix possible NULL pointer dereference in mt76u_mcu_deinit routine that can occur if initialization path fails before calling mt76u_mcu_init_rx Fixes: ee676cd5017c ("mt76: add driver code for MT76x2u based devices") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02u: use usb_bulk_msg to upload firmwareStanislaw Gruszka
We don't need to send firmware data asynchronously, much simpler is just use synchronous usb_bulk_msg(). Tested-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x0: init: introduce mt76x0_init_txpower routineLorenzo Bianconi
Add mt76x0_init_txpower in order to initialize max_power per channel at device bootstrap. Modify mt76x0_get_tx_power_per_rate and mt76x0_get_power_info signature in order to compute tx power for non-operating channels Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x0: phy: report target_power in debugfsLorenzo Bianconi
Initialize target_power variable in mt76x0_phy_set_txpower in order to report target_power in debugfs Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: change the return type of mt76_dma_attach()Ryder Lee
There is no need to retun 0 in mt76_dma_attach(), so switch it to void. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x2: remove mt76x2_alloc_device routineLorenzo Bianconi
Remove mt76x2_alloc_device since it just runs mt76_alloc_device. Move mt76_alloc_device call in mt76x2_probe Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x0: remove mt76x0u_alloc_device routineLorenzo Bianconi
Remove mt76x0u_alloc_device since it just runs mt76_alloc_device. Move mt76_alloc_device call in mt76x0u_probe and in mt76x0e_probe Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x2u: remove mt76x2u_alloc_device routineLorenzo Bianconi
Remove mt76x2u_alloc_device since it just runs mt76_alloc_device. Move mt76_alloc_device call in mt76x2u_probe Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: move alloc_device common code in mt76_alloc_deviceLorenzo Bianconi
Move mt76x{0,2} alloc_device common code in mt76_alloc_device and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: increase ED/CCA tx block thresholdFelix Fietkau
Block only when the busy time reaches 92%, as lower values can be reached with heavy 802.11 traffic as well. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: measure the time between mt76x02_edcca_check runsFelix Fietkau
Based on system load and time needed by other calibration runs, the time between dev->mac_work runs can vary quite a bit. Calculate busy time based on the actual time difference in order to avoid potentially over-estimating busy time, which could lead to unnecessary tx blocking. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: clear CCA timer stats in mt76x02_edcca_initFelix Fietkau
Avoid triggering too early Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: run MAC work every 100msFelix Fietkau
ED/CCA Tx blocking checks need to be run every 100 ms in order to avoid triggering too late and keeping tx blocking on for too long Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: explicitly disable energy detect cca during scanFelix Fietkau
Avoid reusing the previous channel's tx blocking state Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: mt76x2: avoid running DPD calibration if tx is blockedFelix Fietkau
Doing so could lead to hangs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: fix software encryption issuesFelix Fietkau
Software encrypted packets can be passed not just through the drv_tx callback, but also through the intermediate tx queue. In order to deal with that, move the override to mt76x02_mac_write_txwi and also take care of filling in the per-packet rate information Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: remove add_buf pointer in mt76_queue_opsLorenzo Bianconi
Remove add_buf function pointer in mt76_queue_ops data structure since it is no longer used Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: move mt76_dma_tx_queue_skb_raw in mt76-core moduleLorenzo Bianconi
Move mt76_dma_tx_queue_skb_raw routine in dma.c and add the corresponding entry in mt76_queue_ops data structure. mt76_dma_tx_queue_skb_raw will be reused adding support for mt7603 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x0: mcu: remove useless commented configurationLorenzo Bianconi
Remove useless commented out configuration in mt76x0u_load_firmware routine Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: move mt76_mcu_rx_event in mt76-coreLorenzo Bianconi
Move mt76_mcu_rx_event i mt76-core module and remove duplicated code. mt76_mcu_rx_event will be reused adding support for mt7603 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: move mt76_mcu_get_response in mt76-coreLorenzo Bianconi
Move mt76_mcu_get_response in mt76-core module and remove duplicated code. mt76_mcu_get_response will be reused adding support for mt7603 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: move mt76_mcu_msg_alloc in mt76-coreLorenzo Bianconi
Move mt76_mcu_msg_alloc in mt76-core module and remove duplicated code. mt76_mcu_msg_alloc will be reused adding support for mt7603 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x0: eeprom: fix VHT mcs{8,9} rate power offsetLorenzo Bianconi
Fix rate power configuration for VHT mcs 8 and 9 in mt76x0_get_tx_power_per_rate. Moreover use the rate power offset used for HT/VHT mcs 6 even for HT/VHT mcs 7 Fixes: b37bbc8c8251 ("mt76x0: remove eeprom dependency from mt76x0_set_tx_power_per_rate") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02: enable support for IBSS and MESHStanislaw Gruszka
Since we implement beconing on USB now, similar interfaces should be supported for USB as are for MMIO. Tested only on IBSS mode and AP mode (not enabled due to lack of PS buffering). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: beaconing fixes for USBStanislaw Gruszka
Configure beaconing on USB devices without PS buffering support. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02: init beacon config for mt76x2uStanislaw Gruszka
Initialize beaconing also on mt76x2u. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02: minor beaconing init changesStanislaw Gruszka
Disable BEACON timer during init and configure interrupt registers only for mmio devices. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02: initialize mutli bss mode when set up addressStanislaw Gruszka
BSSID is not strtirct related with beaconing (for example we can have 2 STA vifs) and more related with MAC address, so initaize BSSID when setting MAC address. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02: use commmon add interface for mt76x2uStanislaw Gruszka
Since we now support mt76x2u feature to allow set mac address when creating interface in common code we can use it for mt76x2u. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02: use mask for vifsStanislaw Gruszka
Use vif_mask to count interfaces to allow to set mac address in HW if there is only one interface and report error if we create interface with wrong BSSID resulting in already used index. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18Merge tag 'iwlwifi-next-for-kalle-2019-02-14' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Fourth batch of iwlwifi patches intended for v5.1 * Work on the new debugging infrastructure continues; * FTM (Fine Timing Measurement) initiator and responder implementation; * Support for a new device family started; * Bump supported FW API to 46; * General bugfixes; * Other cleanups;
2019-02-14iwlwifi: mvm: stop static queues correctlyAvraham Stern
AP interfaces still use some static TX queues (for probes, broadcast and multicast frames). These queues were not stopped correctly when the transport layer indicated the queue should be stopped. As a result, when flushing the queues, new frames from the overflow queue were tx'd, so the queues still had frames after flushing. This ended up in an assert since trying to remove a station with non-empty queues. Fix it by stopping the static queues correctly when required. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: dbg_ini: add early and after alive apply points to unified imagesShahar S Matityahu
Add IWL_FW_INI_APPLY_EARLY and IWL_FW_INI_APPLY_AFTER_ALIVE apply points to unified images. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: mvm: Do not return an error value on HW restartIlan Peer
When HW restart is requested but not started yet, commands would not be sent to the FW, and some function calls would return an error. In case of iwl_mvm_mac_sta_state() returning an error value when a station is removed can lead to an unneeded warning in __sta_info_destroy_part2(). Handle this by setting the return value to 0, in case HW restart is in progress. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: mvm: Don't warn on command failure during restartIlan Peer
When HW restart is requested but not started yet, commands would not be sent to the FW, and some function calls return an error. Such cases can trigger unneeded warning messages, e.g., in iwl_mvm_mac_sta_state() and iwl_mvm_bss_info_changed_station(). Handle a couple of these cases by also checking in the WARN_ON() condition that HW restart is not requested. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-26 05:46:58 +0000