| Age | Commit message (Collapse) | Author |
|---|
|
Refactor some functions in kprobe_multi_test.c to extract
some helper functions who will be used in later patches
to avoid code duplication.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240326041503.1198982-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
With CONFIG_LTO_CLANG_THIN enabled, with some of previous
version of kernel code base ([1]), I hit the following
error:
test_ksyms:PASS:kallsyms_fopen 0 nsec
test_ksyms:FAIL:ksym_find symbol 'bpf_link_fops' not found
#118 ksyms:FAIL
The reason is that 'bpf_link_fops' is renamed to
bpf_link_fops.llvm.8325593422554671469
Due to cross-file inlining, the static variable 'bpf_link_fops'
in syscall.c is used by a function in another file. To avoid
potential duplicated names, the llvm added suffix
'.llvm.<hash>' ([2]) to 'bpf_link_fops' variable.
Such renaming caused a problem in libbpf if 'bpf_link_fops'
is used in bpf prog as a ksym but 'bpf_link_fops' does not
match any symbol in /proc/kallsyms.
To fix this issue, libbpf needs to understand that suffix '.llvm.<hash>'
is caused by clang lto kernel and to process such symbols properly.
With latest bpf-next code base built with CONFIG_LTO_CLANG_THIN,
I cannot reproduce the above failure any more. But such an issue
could happen with other symbols or in the future for bpf_link_fops symbol.
For example, with my current kernel, I got the following from
/proc/kallsyms:
ffffffff84782154 d __func__.net_ratelimit.llvm.6135436931166841955
ffffffff85f0a500 d tk_core.llvm.726630847145216431
ffffffff85fdb960 d __fs_reclaim_map.llvm.10487989720912350772
ffffffff864c7300 d fake_dst_ops.llvm.54750082607048300
I could not easily create a selftest to test newly-added
libbpf functionality with a static C test since I do not know
which symbol is cross-file inlined. But based on my particular kernel,
the following test change can run successfully.
> diff --git a/tools/testing/selftests/bpf/prog_tests/ksyms.c b/tools/testing/selftests/bpf/prog_tests/ksyms.c
> index 6a86d1f07800..904a103f7b1d 100644
> --- a/tools/testing/selftests/bpf/prog_tests/ksyms.c
> +++ b/tools/testing/selftests/bpf/prog_tests/ksyms.c
> @@ -42,6 +42,7 @@ void test_ksyms(void)
> ASSERT_EQ(data->out__bpf_link_fops, link_fops_addr, "bpf_link_fops");
> ASSERT_EQ(data->out__bpf_link_fops1, 0, "bpf_link_fops1");
> ASSERT_EQ(data->out__btf_size, btf_size, "btf_size");
> + ASSERT_NEQ(data->out__fake_dst_ops, 0, "fake_dst_ops");
> ASSERT_EQ(data->out__per_cpu_start, per_cpu_start_addr, "__per_cpu_start");
>
> cleanup:
> diff --git a/tools/testing/selftests/bpf/progs/test_ksyms.c b/tools/testing/selftests/bpf/progs/test_ksyms.c
> index 6c9cbb5a3bdf..fe91eef54b66 100644
> --- a/tools/testing/selftests/bpf/progs/test_ksyms.c
> +++ b/tools/testing/selftests/bpf/progs/test_ksyms.c
> @@ -9,11 +9,13 @@ __u64 out__bpf_link_fops = -1;
> __u64 out__bpf_link_fops1 = -1;
> __u64 out__btf_size = -1;
> __u64 out__per_cpu_start = -1;
> +__u64 out__fake_dst_ops = -1;
>
> extern const void bpf_link_fops __ksym;
> extern const void __start_BTF __ksym;
> extern const void __stop_BTF __ksym;
> extern const void __per_cpu_start __ksym;
> +extern const void fake_dst_ops __ksym;
> /* non-existing symbol, weak, default to zero */
> extern const void bpf_link_fops1 __ksym __weak;
>
> @@ -23,6 +25,7 @@ int handler(const void *ctx)
> out__bpf_link_fops = (__u64)&bpf_link_fops;
> out__btf_size = (__u64)(&__stop_BTF - &__start_BTF);
> out__per_cpu_start = (__u64)&__per_cpu_start;
> + out__fake_dst_ops = (__u64)&fake_dst_ops;
>
> out__bpf_link_fops1 = (__u64)&bpf_link_fops1;
This patch fixed the issue in libbpf such that
the suffix '.llvm.<hash>' will be ignored during comparison of
bpf prog ksym vs. symbols in /proc/kallsyms, this resolved the issue.
Currently, only static variables in /proc/kallsyms are checked
with '.llvm.<hash>' suffix since in bpf programs function ksyms
with '.llvm.<hash>' suffix are most likely kfunc's and unlikely
to be cross-file inlined.
Note that currently kernel does not support gcc build with lto.
[1] https://lore.kernel.org/bpf/20240302165017.1627295-1-yonghong.song@linux.dev/
[2] https://github.com/llvm/llvm-project/blob/release/18.x/llvm/include/llvm/IR/ModuleSummaryIndex.h#L1714-L1719
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240326041458.1198161-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently libbpf_kallsyms_parse() function is declared as a global
function but actually it is not a API and there is no external
users in bpftool/bpf-selftests. So let us mark the function as
static.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240326041453.1197949-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Replace CHECK with ASSERT macros for ksyms tests.
This test failed earlier with clang lto kernel, but the
issue is gone with latest code base. But replacing
CHECK with ASSERT still improves code as ASSERT is
preferred in selftests.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240326041448.1197812-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds a test to ensure all static tcp-cc kfuncs is visible to
the struct_ops bpf programs. It is checked by successfully loading
the struct_ops programs calling these tcp-cc kfuncs.
This patch needs to enable the CONFIG_TCP_CONG_DCTCP and
the CONFIG_TCP_CONG_BBR.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240322191433.4133280-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The commit 7aae231ac93b ("bpf: tcp: Limit calling some tcp cc functions to CONFIG_DYNAMIC_FTRACE")
added CONFIG_DYNAMIC_FTRACE guard because pahole was only generating
btf for ftrace-able functions. The ftrace filter had already been
removed from pahole, so the CONFIG_DYNAMIC_FTRACE guard can be
removed.
The commit 569c484f9995 ("bpf: Limit static tcp-cc functions in the .BTF_ids list to x86")
has added CONFIG_X86 guard because it failed the powerpc arch which
prepended a "." to the local static function, so "cubictcp_init" becomes
".cubictcp_init". "__bpf_kfunc" has been added to kfunc
since then and it uses the __unused compiler attribute.
There is an existing
"__bpf_kfunc static u32 bpf_kfunc_call_test_static_unused_arg(u32 arg, u32 unused)"
test in bpf_testmod.c to cover the static kfunc case.
cross compile on ppc64 with CONFIG_DYNAMIC_FTRACE disabled:
> readelf -s vmlinux | grep cubictcp_
56938: c00000000144fd00 184 FUNC LOCAL DEFAULT 2 cubictcp_cwnd_event [<localentry>: 8]
56939: c00000000144fdb8 200 FUNC LOCAL DEFAULT 2 cubictcp_recalc_[...] [<localentry>: 8]
56940: c00000000144fe80 296 FUNC LOCAL DEFAULT 2 cubictcp_init [<localentry>: 8]
56941: c00000000144ffa8 228 FUNC LOCAL DEFAULT 2 cubictcp_state [<localentry>: 8]
56942: c00000000145008c 1908 FUNC LOCAL DEFAULT 2 cubictcp_cong_avoid [<localentry>: 8]
56943: c000000001450800 1644 FUNC LOCAL DEFAULT 2 cubictcp_acked [<localentry>: 8]
> bpftool btf dump file vmlinux | grep cubictcp_
[51540] FUNC 'cubictcp_acked' type_id=38137 linkage=static
[51541] FUNC 'cubictcp_cong_avoid' type_id=38122 linkage=static
[51543] FUNC 'cubictcp_cwnd_event' type_id=51542 linkage=static
[51544] FUNC 'cubictcp_init' type_id=9186 linkage=static
[51545] FUNC 'cubictcp_recalc_ssthresh' type_id=35021 linkage=static
[51547] FUNC 'cubictcp_state' type_id=38141 linkage=static
The patch removed both config guards.
Cc: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240322191433.4133280-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Following the recent upgrade of one of our BPF programs, we encountered
significant latency spikes affecting other applications running on the same
host. After thorough investigation, we identified that these spikes were
primarily caused by the prolonged duration required to free a
non-preallocated htab with approximately 2 million keys.
Notably, our kernel configuration lacks the presence of CONFIG_PREEMPT. In
scenarios where kernel execution extends excessively, other threads might
be starved of CPU time, resulting in latency issues across the system. To
mitigate this, we've adopted a proactive approach by incorporating
cond_resched() calls within the kernel code. This ensures that during
lengthy kernel operations, the scheduler is invoked periodically to provide
opportunities for other threads to execute.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240327032022.78391-1-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Andrii Nakryiko says:
====================
bench: fast in-kernel triggering benchmarks
Remove "legacy" triggering benchmarks which rely on syscalls (and thus syscall
overhead is a noticeable part of benchmark, unfortunately). Replace them with
faster versions that rely on triggering BPF programs in-kernel through another
simple "driver" BPF program. See patch #2 with comparison results.
raw_tp/tp/fmodret benchmarks required adding a simple kfunc in kernel to be
able to trigger a simple tracepoint from BPF program (plus it is also allowed
to be replaced by fmod_ret programs). This limits raw_tp/tp/fmodret benchmarks
to new kernels only, but it keeps bench tool itself very portable and most of
other benchmarks will still work on wide variety of kernels without the need
to worry about building and deploying custom kernel module. See patches #5
and #6 for details.
v1->v2:
- move new TP closer to BPF test run code;
- rename/move kfunc and register it for fmod_rets (Alexei);
- limit --trig-batch-iters param to [1, 1000] (Alexei).
====================
Link: https://lore.kernel.org/r/20240326162151.3981687-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Utilize bpf_modify_return_test_tp() kfunc to have a fast way to trigger
tp/raw_tp/fmodret programs from another BPF program, which gives us
comparable batched benchmarks to (batched) kprobe/fentry benchmarks.
We don't switch kprobe/fentry batched benchmarks to this kfunc to make
bench tool usable on older kernels as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240326162151.3981687-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a simple bpf_modify_return_test_tp() kfunc, available to all program
types, that is useful for various testing and benchmarking scenarios, as
it allows to trigger most tracing BPF program types from BPF side,
allowing to do complex testing and benchmarking scenarios.
It is also attachable to for fmod_ret programs, making it a good and
simple way to trigger fmod_ret program under test/benchmark.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240326162151.3981687-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Instead of front-loading all possible benchmarking BPF programs for
trigger benchmarks, explicitly specify which BPF programs are used by
specific benchmark and load only it.
This allows to be more flexible in supporting older kernels, where some
program types might not be possible to load (e.g., those that rely on
newly added kfunc).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240326162151.3981687-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Remove "legacy" benchmarks triggered by syscalls in favor of newly added
in-kernel/batched benchmarks. Drop -batched suffix now as well.
Next patch will restore "feature parity" by adding back
tp/raw_tp/fmodret benchmarks based on in-kernel kfunc approach.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240326162151.3981687-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Existing kprobe/fentry triggering benchmarks have 1-to-1 mapping between
one syscall execution and BPF program run. While we use a fast
get_pgid() syscall, syscall overhead can still be non-trivial.
This patch adds kprobe/fentry set of benchmarks significantly amortizing
the cost of syscall vs actual BPF triggering overhead. We do this by
employing BPF_PROG_TEST_RUN command to trigger "driver" raw_tp program
which does a tight parameterized loop calling cheap BPF helper
(bpf_get_numa_node_id()), to which kprobe/fentry programs are
attached for benchmarking.
This way 1 bpf() syscall causes N executions of BPF program being
benchmarked. N defaults to 100, but can be adjusted with
--trig-batch-iters CLI argument.
For comparison we also implement a new baseline program that instead of
triggering another BPF program just does N atomic per-CPU counter
increments, establishing the limit for all other types of program within
this batched benchmarking setup.
Taking the final set of benchmarks added in this patch set (including
tp/raw_tp/fmodret, added in later patch), and keeping for now "legacy"
syscall-driven benchmarks, we can capture all triggering benchmarks in
one place for comparison, before we remove the legacy ones (and rename
xxx-batched into just xxx).
$ benchs/run_bench_trigger.sh
usermode-count : 79.500 ± 0.024M/s
kernel-count : 49.949 ± 0.081M/s
syscall-count : 9.009 ± 0.007M/s
fentry-batch : 31.002 ± 0.015M/s
fexit-batch : 20.372 ± 0.028M/s
fmodret-batch : 21.651 ± 0.659M/s
rawtp-batch : 36.775 ± 0.264M/s
tp-batch : 19.411 ± 0.248M/s
kprobe-batch : 12.949 ± 0.220M/s
kprobe-multi-batch : 15.400 ± 0.007M/s
kretprobe-batch : 5.559 ± 0.011M/s
kretprobe-multi-batch: 5.861 ± 0.003M/s
fentry-legacy : 8.329 ± 0.004M/s
fexit-legacy : 6.239 ± 0.003M/s
fmodret-legacy : 6.595 ± 0.001M/s
rawtp-legacy : 8.305 ± 0.004M/s
tp-legacy : 6.382 ± 0.001M/s
kprobe-legacy : 5.528 ± 0.003M/s
kprobe-multi-legacy : 5.864 ± 0.022M/s
kretprobe-legacy : 3.081 ± 0.001M/s
kretprobe-multi-legacy: 3.193 ± 0.001M/s
Note how xxx-batch variants are measured with significantly higher
throughput, even though it's exactly the same in-kernel overhead. As
such, results can be compared only between benchmarks of the same kind
(syscall vs batched):
fentry-legacy : 8.329 ± 0.004M/s
fentry-batch : 31.002 ± 0.015M/s
kprobe-multi-legacy : 5.864 ± 0.022M/s
kprobe-multi-batch : 15.400 ± 0.007M/s
Note also that syscall-count is setting a theoretical limit for
syscall-triggered benchmarks, while kernel-count is setting similar
limits for batch variants. usermode-count is a happy and unachievable
case of user space counting without doing any syscalls, and is mostly
the measure of CPU speed for such a trivial benchmark.
As was mentioned, tp/raw_tp/fmodret require kernel-side kfunc to produce
similar benchmark, which we address in a separate patch.
Note that run_bench_trigger.sh allows to override a list of benchmarks
to run, which is very useful for performance work.
Cc: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240326162151.3981687-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Rename uprobe-base to more precise usermode-count (it will match other
baseline-like benchmarks, kernel-count and syscall-count). Also use
BENCH_TRIG_USERMODE() macro to define all usermode-based triggering
benchmarks, which include usermode-count and uprobe/uretprobe benchmarks.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240326162151.3981687-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use the well defined helper sizeof_field() to calculate the size of a
struct member, instead of doing custom calculations.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Link: https://lore.kernel.org/r/20240327065334.8140-1-haiyue.wang@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
BPF verifier emits "unknown func" message when given BPF program type
does not support BPF helper. This message may be confusing for users, as
important context that helper is unknown only to current program type is
not provided.
This patch changes message to "program of this type cannot use helper "
and aligns dependent code in libbpf and tests. Any suggestions on
improving/changing this message are welcome.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20240325152210.377548-1-yatsenko@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The struct bpf_fib_lookup should not grow outside of its 64 bytes.
Add a static assert to validate this.
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240326101742.17421-4-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch extends the fib_lookup test suite by adding a few test
cases for each IP family to test the new BPF_FIB_LOOKUP_MARK flag
to the bpf_fib_lookup:
* Test destination IP address selection with and without a mark
and/or the BPF_FIB_LOOKUP_MARK flag set
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240326101742.17421-3-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extend the bpf_fib_lookup() helper by making it to utilize mark if
the BPF_FIB_LOOKUP_MARK flag is set. In order to pass the mark the
four bytes of struct bpf_fib_lookup are used, shared with the
output-only smac/dmac fields.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240326101742.17421-2-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Niklas Söderlund says:
====================
ravb: Support describing the MDIO bus
This series adds support to the binding and driver of the Renesas
Ethernet AVB to described the MDIO bus. Currently the driver uses
the OF node of the device itself when registering the MDIO bus.
This forces any MDIO bus properties the MDIO core should react on
to be set on the device OF node. This is confusing and none of
the MDIO bus properties are described in the Ethernet AVB bindings.
Patch 1/2 extends the bindings with an optional mdio child-node
to the device that can be used to contain the MDIO bus settings.
While patch 2/2 changes the driver to use this node (if present)
when registering the MDIO bus.
If the new optional mdio child-node is not present the driver
fallback to the old behavior and uses the device OF node like before.
This change is fully backward compatible with existing usage
of the bindings.
====================
Link: https://lore.kernel.org/r/20240325153451.2366083-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver used the DT node of the device itself when registering the
MDIO bus. While this works, it creates a problem: it forces any MDIO bus
properties to also be set on the devices DT node. This mixes the
properties of two distinctly different things and is confusing.
This change adds support for an optional mdio node to be defined as a
child to the device DT node. The child node can then be used to describe
MDIO bus properties that the MDIO core can act on when registering the
bus.
If no mdio child node is found the driver fallback to the old behavior
and register the MDIO bus using the device DT node. This change is
backward compatible with old bindings in use.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240325153451.2366083-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Renesas Ethernet AVB bindings do not allow the MDIO bus to be
described. This has not been needed as only a single PHY is
supported and no MDIO bus properties have been needed.
Add an optional mdio node to the binding which allows the MDIO bus to be
described and allow bus properties to be set.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240325153451.2366083-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hangbin Liu says:
====================
doc/netlink/specs: Add vlan support
Add vlan support in rt_link spec.
====================
Link: https://lore.kernel.org/r/20240327123130.1322921-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With command:
# ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifname": "eno1.2"}' --output-json | \
jq -C '.linkinfo'
Before:
Exception: No message format for 'vlan' in sub-message spec 'linkinfo-data-msg'
After:
{
"kind": "vlan",
"data": {
"protocol": "8021q",
"id": 2,
"flag": {
"flags": [
"reorder-hdr"
],
"mask": "0xffffffff"
},
"egress-qos": {
"mapping": [
{
"from": 1,
"to": 2
},
{
"from": 4,
"to": 4
}
]
}
}
}
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240327123130.1322921-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some times it would be convenient to read the integer as hex, like
mask values.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240327123130.1322921-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Petr Machata says:
====================
selftests: Fixes for kernel CI
As discussed on the bi-weekly call on Jan 30, and in mailing around
kernel CI effort, some changes are desirable in the suite of forwarding
selftests the better to work with the CI tooling. Namely:
- The forwarding selftests use a configuration file where names of
interfaces are defined and various variables can be overridden. There
is also forwarding.config.sample that users can use as a template to
refer to when creating the config file. What happens a fair bit is
that users either do not know about this at all, or simply forget, and
are confused by cryptic failures about interfaces that cannot be
created.
In patches #1 - #3 have lib.sh just be the single source of truth with
regards to which variables exist. That includes the topology variables
which were previously only in the sample file, and any "tweak
variables", such as what tools to use, sleep times, etc.
forwarding.config.sample then becomes just a placeholder with a couple
examples. Unless specific HW should be exercised, or specific tools
used, the defaults are usually just fine.
- Several net/forwarding/ selftests (and one net/ one) cannot be run on
veth pairs, they need an actual HW interface to run on. They are
generic in the sense that any capable HW should pass them, which is
why they have been put to net/forwarding/ as opposed to drivers/net/,
but they do not generalize to veth. The fact that these tests are in
net/forwarding/, but still complaining when run, is confusing.
In patches #4 - #6 move these tests to a new directory
drivers/net/hw.
- The following patches extend the codebase to handle well test results
other than pass and fail.
Patch #7 is preparatory. It converts several log_test_skip to XFAIL,
so that tests do not spuriously end up returning non-0 when they
are not supposed to.
In patches #8 - #10, introduce some missing ksft constants, then support
having those constants in RET, and then finally in EXIT_STATUS.
- The traffic scheduler tests generate a large amount of network traffic
to test the behavior of the scheduler. This demands a relatively
high-performance computer. On slow machines, such as with a debugging
kernel, the test would spuriously fail.
It can still be useful to "go through the motions" though, to possibly
catch bugs in setup of the scheduler graph and passing packets around.
Thus we still want to run the tests, just with lowered demands.
To that end, in patches #11 - #12, introduce an environment variable
KSFT_MACHINE_SLOW, with obvious meaning. Tests can then make checks
more lenient, such as mark failures as XFAIL. A helper, xfail_on_slow,
is provided to mark performance-sensitive parts of the selftest.
- In patch #13, use a similar mechanism to mark a NH group stats
selftest to XFAIL HW stats tests when run on VETH pairs.
- All these changes complicate the hitherto straightforward logging and
checking logic, so in patch #14, add a selftest that checks this
functionality in lib.sh.
v1 (vs. an RFC circulated through linux-kselftest):
- Patch #9:
- Clarify intended usage by s/set_ret/ret_set_ksft_status/,
s/nret/ksft_status/
====================
Link: https://lore.kernel.org/r/cover.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rerunning various scenarios to make sure lib.sh changes do not impact the
observable behavior is no fun. Add a selftest at least for the bare basics
-- the mechanics of setting RET, retmsg, and EXIT_STATUS.
Since the selftest itself uses lib.sh, it would be possible to break lib.sh
in such a way that invalidates result of the selftest. Since the metatest
only uses the bare basics (just pass/fail), hopefully such fundamental
breakages would be noticed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/6d25cedbf2d4b83614944809a34fe023fbe8db38.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the NH group stats tests are currently run on a veth topology, the
HW-stats leg of each test is SKIP'ped. But kernel networking CI interprets
skips as a sign that tooling is missing, and prompts maintainer
investigation. Lack of capability to pass a test should be expressed as
XFAIL.
Selftests that require HW should normally be put in drivers/net/hw, but
doing so for the NH counter selftests would just lead to a lot of
duplicity.
So instead, introduce a helper, xfail_on_veth(), which can be used to mark
selftests that should XFAIL instead of FAILing when run on a veth topology.
On non-veth topology, they don't do anything.
Use the helper in the HW-stats part of router_mpath_nh_lib selftest.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/15f0ab9637aa0497f164ec30e83c1c8f53d53719.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When run on a slow machine, the scheduler traffic tests can be expected to
fail, and should be reported as XFAIL in that case. Therefore run these
tests through the perf_sensitive wrapper.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/9a357f8cf34f5ececac08d43a3eb023008996035.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several tests in the suite use large amounts of traffic to e.g. cause
congestion and evaluate RED or shaper performance. These tests will not run
well on a slow machine, be it one with heavy debug kernel, or a VM, or e.g.
a single-board computer. Allow users to specify an environment variable,
KSFT_MACHINE_SLOW=yes, to indicate that the tests are being run on one such
machine.
Performance sensitive tests can then use a new helper, xfail_on_slow(), to
mark parts of the test that are sensitive to low-performance machines.
The helper can be used to just mark the whole suite, like so:
xfail_on_slow tests_run
... or, on the other side of the granularity spectrum, to override
individual checks:
xfail_on_slow check_err $? "Expected much, got little."
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/99a376a2d2ffdaeee7752b1910cb0c3ea5d80fbe.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a previous patch, the interpretation of RET value was changed to mean
the kselftest framework constant with the test outcome: $ksft_pass,
$ksft_xfail, etc.
Update log_test() to recognize the various possible RET values.
Then have EXIT_STATUS track the RET value of the current test. This differs
subtly from the way RET tracks the value: while for RET we want to
recognize XFAIL as a separate status, for purposes of exit code, we want to
to conflate XFAIL and PASS, because they both communicate non-failure. Thus
add a new helper, ksft_exit_status_merge().
With this log_test_skip() and log_test_xfail() can be reexpressed as thin
wrappers around log_test.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/e5f807cb5476ab795fd14ac74da53a731a9fc432.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The variable RET keeps track of whether the test under execution has so far
failed or not. Currently it works in binary fashion: zero means everything
is fine, non-zero means something failed. log_test() then uses the value to
given a human-readable message.
In order to allow log_test() to report skips and xfails, the semantics of
RET need to be more fine-grained. Therefore have RET value be one of
kselftest framework constants: $ksft_fail, $ksft_xfail, etc.
The current logic in check_err() is such that first non-zero value of RET
trumps all those that follow. But that is not right when RET has more
fine-grained value semantics. Different outcomes have different weights.
The results of PASS and XFAIL are mostly the same: they both communicate a
test that did not go wrong. SKIP communicates lack of tooling, which the
user should go and try to fix, and as such should not be overridden by the
passes. So far, the higher-numbered statuses can be considered weightier.
But FAIL should be the weightiest.
Add a helper, ksft_status_merge(), which merges two statuses in a way that
respects the above conditions. Express it in a generic manner, because exit
status merge is subtly different, and we want to reuse the same logic.
Use the new helper when setting RET in check_err().
Re-express check_fail() in terms of check_err() to avoid duplication.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/7dfff51cc925c7a3ac879b9050a0d6a327c8d21f.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following patches will operate with more exit codes besides
ksft_skip. Add them here.
Additionally, move a duplicated skip exit code definition from
forwarding/tc_tunnel_key.sh. Keep a similar duplicate in
forwarding/devlink_lib.sh, because even though lib.sh will have
been sourced in all cases where devlink_lib is, the inclusion is not
visible in the file itself, and relying on it would be confusing.
Cc: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/545a03046c7aca0628a51a389a9b81949ab288ce.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The SKIP return should be used for cases where tooling of the machine under
test is lacking. For cases where HW is lacking, the appropriate outcome is
XFAIL.
This is the case with ethtool_rmon and mlxsw_lib. For these, introduce a
new helper, log_test_xfail().
Do the same for router_mpath_nh_lib. Note that it will be fixed using a
more reusable way in a following patch.
For the two resource_scale selftests, the log should simply not be written,
because there is no problem.
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/3d668d8fb6fa0d9eeb47ce6d9e54114348c7c179.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the selftests that are not supposed to run on veth pairs are now in
their own dedicated directory, the skip_on_veth logic can go away. Drop it
from the selftests, and from lib.sh.
Cc: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/63b470e10d65270571ee7de709b31672ce314872.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tests in net/forwarding are generally expected to be HW-independent.
There are however several tests that, while not depending on any HW in
particular, nevertheless depend on being used on HW interfaces. Placing
these selftests to net/forwarding is confusing, because the selftest will
just report it can't be run on veth pairs. At the same time, placing them
to a particular driver's selftests subdirectory would be wrong.
Instead, add a new directory, drivers/net/hw, where these generic but HW
independent selftests should be placed. Move over several such tests
including one helper library.
Since typically these tests will not be expected to run, omit the directory
drivers/net/hw from the TARGETS list in selftests/Makefile. Retain a
Makefile in the new directory itself, so that a user can make -C into that
directory and act on those tests explicitly.
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Cc: Danielle Ratson <danieller@nvidia.com>
Cc: Davide Caratti <dcaratti@redhat.com>
Cc: Johannes Nixdorf <jnixdorf-oss@avm.de>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/e11dae1f62703059e9fc2240004288ac7cc15756.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This library is always sourced in the context where lib.sh has already been
sourced as well. Therefore drop the explicit sourcing and expect the client
to already have done it. This will simplify moving some of the clients to a
different directory.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/a4da5e9cd42a34cbace917a048ca71081719d6ac.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
That any sort of customization is possible at all, let alone how it should
be done, is currently not at all clear. Document the whats and hows in
README.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/e819623af6aaeea49e9dc36cecd95694fad73bb8.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
forwarding.config.sample, net/lib.sh and net/forwarding/lib.sh contain
definitions and redefinitions of some of the same variables. The overlap
between net/forwarding/lib.sh and forwarding.config.sample is especially
large. This duplication is a potential source of confusion and problems.
It would be overall less error prone if each variable were defined in one
place only. In this patch set, that place is the library itself. Therefore
move all comments from forwarding.config.sample to net/forwarding/lib.sh.
Move over also a definition of TC_FLAG, which was missing from lib.sh
entirely.
Additionally, add to lib.sh a default definition of the topology variables.
The logic behind this is that forgetting to specify forwarding.config was a
frequent source of frustration for the selftest users. But really, most of
the time the default veth based topology is just fine. We considered just
sourcing forwarding.config.sample instead if forwarding.config is not
available, but this is a cleaner solution.
That means the syntax of the forwarding.config.sample override has to
change to an array assignment, so that the whole variable is overwritten,
not just individual keys, which could leave the value of some keys
unchanged. Do the same in lib.sh for any cut'n'pasters out there.
The config file is then given a sort of carte blanche to redefine whatever
variables it sees fit from the libraries. This is described in a comment in
the file. Only a handful of variables are left behind, to illustrate the
customization.
The fact that the variables are now missing from forwarding.config.sample,
and therefore would miss from forwarding.config derived from that file as
well, should not change anything. This is just the sample file. Users that
keep their own forwarding.config would retain it as before.
The only observable change is introduction of TC_FLAG to lib.sh, because
now the filters would not be attempted to install to HW datapath. For veth
pairs this does not change anything. For HW deployments, users presumably
have forwarding.config with this value overridden.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/b9b8a11a22821a7aa532211ff461a34f596e26bf.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current syntax of X=${X:=X} first evaluates the ${X:=Y} expression,
which either uses the existing value of $X if there is one, or uses the
value of "Y" as a fallback, and assigns it to X. The expression is then
replaced with the now-current value of $X. Assigning that value to X once
more is meaningless.
So avoid the outer X=... bit, and instead express the same idea though the
do-nothing ":" built-in as : "${X:=Y}". This also cleans up the block
nicely and makes it more readable.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/1890ddc58420c2c0d5ba3154c87ecc6d9faf6947.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, WiFi and netfilter.
Current release - regressions:
- ipv6: fix address dump when IPv6 is disabled on an interface
Current release - new code bugs:
- bpf: temporarily disable atomic operations in BPF arena
- nexthop: fix uninitialized variable in nla_put_nh_group_stats()
Previous releases - regressions:
- bpf: protect against int overflow for stack access size
- hsr: fix the promiscuous mode in offload mode
- wifi: don't always use FW dump trig
- tls: adjust recv return with async crypto and failed copy to
userspace
- tcp: properly terminate timers for kernel sockets
- ice: fix memory corruption bug with suspend and rebuild
- at803x: fix kernel panic with at8031_probe
- qeth: handle deferred cc1
Previous releases - always broken:
- bpf: fix bug in BPF_LDX_MEMSX
- netfilter: reject table flag and netdev basechain updates
- inet_defrag: prevent sk release while still in use
- wifi: pick the version of SESSION_PROTECTION_NOTIF
- wwan: t7xx: split 64bit accesses to fix alignment issues
- mlxbf_gige: call request_irq() after NAPI initialized
- hns3: fix kernel crash when devlink reload during pf
initialization"
* tag 'net-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
inet: inet_defrag: prevent sk release while still in use
Octeontx2-af: fix pause frame configuration in GMP mode
net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips
net: bcmasp: Remove phy_{suspend/resume}
net: bcmasp: Bring up unimac after PHY link up
net: phy: qcom: at803x: fix kernel panic with at8031_probe
netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c
netfilter: nf_tables: skip netdev hook unregistration if table is dormant
netfilter: nf_tables: reject table flag and netdev basechain updates
netfilter: nf_tables: reject destroy command to remove basechain hooks
bpf: update BPF LSM designated reviewer list
bpf: Protect against int overflow for stack access size
bpf: Check bloom filter map value size
bpf: fix warning for crash_kexec
selftests: netdevsim: set test timeout to 10 minutes
net: wan: framer: Add missing static inline qualifiers
mlxbf_gige: call request_irq() after NAPI initialized
tls: get psock ref after taking rxlock to avoid leak
selftests: tls: add test with a partially invalid iov
tls: adjust recv return with async crypto and failed copy to userspace
...
|
|
ip_local_out() and other functions can pass skb->sk as function argument.
If the skb is a fragment and reassembly happens before such function call
returns, the sk must not be released.
This affects skb fragments reassembled via netfilter or similar
modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline.
Eric Dumazet made an initial analysis of this bug. Quoting Eric:
Calling ip_defrag() in output path is also implying skb_orphan(),
which is buggy because output path relies on sk not disappearing.
A relevant old patch about the issue was :
8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()")
[..]
net/ipv4/ip_output.c depends on skb->sk being set, and probably to an
inet socket, not an arbitrary one.
If we orphan the packet in ipvlan, then downstream things like FQ
packet scheduler will not work properly.
We need to change ip_defrag() to only use skb_orphan() when really
needed, ie whenever frag_list is going to be used.
Eric suggested to stash sk in fragment queue and made an initial patch.
However there is a problem with this:
If skb is refragmented again right after, ip_do_fragment() will copy
head->sk to the new fragments, and sets up destructor to sock_wfree.
IOW, we have no choice but to fix up sk_wmem accouting to reflect the
fully reassembled skb, else wmem will underflow.
This change moves the orphan down into the core, to last possible moment.
As ip_defrag_offset is aliased with sk_buff->sk member, we must move the
offset into the FRAG_CB, else skb->sk gets clobbered.
This allows to delay the orphaning long enough to learn if the skb has
to be queued or if the skb is completing the reasm queue.
In the former case, things work as before, skb is orphaned. This is
safe because skb gets queued/stolen and won't continue past reasm engine.
In the latter case, we will steal the skb->sk reference, reattach it to
the head skb, and fix up wmem accouting when inet_frag inflates truesize.
Fixes: 7026b1ddb6b8 ("netfilter: Pass socket pointer down through okfn().")
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Reported-by: syzbot+e5167d7144a62715044c@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240326101845.30836-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The Octeontx2 MAC block (CGX) has separate data paths (SMU and GMP) for
different speeds, allowing for efficient data transfer.
The previous patch which added pause frame configuration has a bug due
to which pause frame feature is not working in GMP mode.
This patch fixes the issue by configurating appropriate registers.
Fixes: f7e086e754fe ("octeontx2-af: Pause frame configuration at cgx")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240326052720.4441-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
PCI11x1x Rev B0 devices might drop packets when receiving back to back frames
at 2.5G link speed. Change the B0 Rev device's Receive filtering Engine FIFO
threshold parameter from its hardware default of 4 to 3 dwords to prevent the
problem. Rev C0 and later hardware already defaults to 3 dwords.
Fixes: bb4f6bffe33c ("net: lan743x: Add PCI11010 / PCI11414 device IDs")
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240326065805.686128-1-Raju.Lakkaraju@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Justin Chen says:
====================
net: bcmasp: phy managements fixes
Fix two issues.
- The unimac may be put in a bad state if PHY RX clk doesn't exist
during reset. Work around this by bringing the unimac out of reset
during phy up.
- Remove redundant phy_{suspend/resume}
====================
Link: https://lore.kernel.org/r/20240325193025.1540737-1-justin.chen@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
phy_{suspend/resume} is redundant. It gets called from phy_{stop/start}.
Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The unimac requires the PHY RX clk during reset or it may be put
into a bad state. Bring up the unimac after link up to ensure the
PHY RX clk exists.
Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On reworking and splitting the at803x driver, in splitting function of
at803x PHYs it was added a NULL dereference bug where priv is referenced
before it's actually allocated and then is tried to write to for the
is_1000basex and is_fiber variables in the case of at8031, writing on
the wrong address.
Fix this by correctly setting priv local variable only after
at803x_probe is called and actually allocates priv in the phydev struct.
Reported-by: William Wortel <wwortel@dorpstraat.com>
Cc: <stable@vger.kernel.org>
Fixes: 25d2ba94005f ("net: phy: at803x: move specific at8031 probe mode check to dedicated probe")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240325190621.2665-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 reject destroy chain command to delete device hooks in netdev
family, hence, only delchain commands are allowed.
Patch #2 reject table flag update interference with netdev basechain
hook updates, this can leave hooks in inconsistent
registration/unregistration state.
Patch #3 do not unregister netdev basechain hooks if table is dormant.
Otherwise, splat with double unregistration is possible.
Patch #4 fixes Kconfig to allow to restore IP_NF_ARPTABLES,
from Kuniyuki Iwashima.
There are a more fixes still in progress on my side that need more work.
* tag 'nf-24-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c
netfilter: nf_tables: skip netdev hook unregistration if table is dormant
netfilter: nf_tables: reject table flag and netdev basechain updates
netfilter: nf_tables: reject destroy command to remove basechain hooks
====================
Link: https://lore.kernel.org/r/20240328031855.2063-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
