summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-01net/mlx5: Fix function calculation for page treesDaniel Jurgens
The function calculation always results in a value of 0. This works generally, but when the release all pages feature is enabled it will result in crashes. Fixes: 0aa128475d33 ("net/mlx5: Maintain separate page trees for ECPF and PF functions") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-02-01 This series contains updates to igc and i40e drivers. Kai-Heng Feng fixes igc to report unknown speed and duplex during suspend as an attempted read will cause errors. Kevin Lo sets the default value to -IGC_ERR_NVM instead of success for writing shadow RAM as this could miss a timeout. Also propagates the return value for Flow Control configuration to properly pass on errors for igc. Aleksandr reverts commit 2ad1274fa35a ("i40e: don't report link up for a VF who hasn't enabled queues") as this can cause link flapping. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Revert "i40e: don't report link up for a VF who hasn't enabled queues" igc: check return value of ret_val in igc_config_fc_after_link_up igc: set the default return value to -IGC_ERR_NVM in igc_write_nvm_srwr igc: Report speed and duplex as unknown when device is runtime suspended ==================== Link: https://lore.kernel.org/r/20210201214618.852831-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01docs: networking: swap words in icmp_errors_use_inbound_ifaddr docVincent Bernat
Signed-off-by: Vincent Bernat <vincent@bernat.ch> Link: https://lore.kernel.org/r/20210130190518.854806-1-vincent@bernat.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01udp: ipv4: manipulate network header of NATed UDP GRO fraglistDongseok Yi
UDP/IP header of UDP GROed frag_skbs are not updated even after NAT forwarding. Only the header of head_skb from ip_finish_output_gso -> skb_gso_segment is updated but following frag_skbs are not updated. A call path skb_mac_gso_segment -> inet_gso_segment -> udp4_ufo_fragment -> __udp_gso_segment -> __udp_gso_segment_list does not try to update UDP/IP header of the segment list but copy only the MAC header. Update port, addr and check of each skb of the segment list in __udp_gso_segment_list. It covers both SNAT and DNAT. Fixes: 9fd1ff5d2ac7 (udp: Support UDP fraglist GRO/GSO.) Signed-off-by: Dongseok Yi <dseok.yi@samsung.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Link: https://lore.kernel.org/r/1611962007-80092-1-git-send-email-dseok.yi@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01net: ip_tunnel: fix mtu calculationVadim Fedorenko
dev->hard_header_len for tunnel interface is set only when header_ops are set too and already contains full overhead of any tunnel encapsulation. That's why there is not need to use this overhead twice in mtu calc. Fixes: fdafed459998 ("ip_gre: set dev->hard_header_len and dev->needed_headroom properly") Reported-by: Slava Bacherikov <mail@slava.cc> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/1611959267-20536-1-git-send-email-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01vsock: fix the race conditions in multi-transport supportAlexander Popov
There are multiple similar bugs implicitly introduced by the commit c0cfa2d8a788fcf4 ("vsock: add multi-transports support") and commit 6a2c0962105ae8ce ("vsock: prevent transport modules unloading"). The bug pattern: [1] vsock_sock.transport pointer is copied to a local variable, [2] lock_sock() is called, [3] the local variable is used. VSOCK multi-transport support introduced the race condition: vsock_sock.transport value may change between [1] and [2]. Let's copy vsock_sock.transport pointer to local variables after the lock_sock() call. Fixes: c0cfa2d8a788fcf4 ("vsock: add multi-transports support") Signed-off-by: Alexander Popov <alex.popov@linux.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20210201084719.2257066-1-alex.popov@linux.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01net: sched: replaced invalid qdisc tree flush helper in qdisc_replaceAlexander Ovechkin
Commit e5f0e8f8e456 ("net: sched: introduce and use qdisc tree flush/purge helpers") introduced qdisc tree flush/purge helpers, but erroneously used flush helper instead of purge helper in qdisc_replace function. This issue was found in our CI, that tests various qdisc setups by configuring qdisc and sending data through it. Call of invalid helper sporadically leads to corruption of vt_tree/cf_tree of hfsc_class that causes kernel oops: Oops: 0000 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-8f6859df #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:rb_insert_color+0x18/0x190 Code: c3 31 c0 c3 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 48 8b 07 48 85 c0 0f 84 05 01 00 00 48 8b 10 f6 c2 01 0f 85 34 01 00 00 <48> 8b 4a 08 49 89 d0 48 39 c1 74 7d 48 85 c9 74 32 f6 01 01 75 2d RSP: 0018:ffffc900000b8bb0 EFLAGS: 00010246 RAX: ffff8881ef4c38b0 RBX: ffff8881d956e400 RCX: ffff8881ef4c38b0 RDX: 0000000000000000 RSI: ffff8881d956f0a8 RDI: ffff8881d956e4b0 RBP: 0000000000000000 R08: 000000d5c4e249da R09: 1600000000000000 R10: ffffc900000b8be0 R11: ffffc900000b8b28 R12: 0000000000000001 R13: 000000000000005a R14: ffff8881f0905000 R15: ffff8881f0387d00 FS: 0000000000000000(0000) GS:ffff8881f8b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 00000001f4796004 CR4: 0000000000060ee0 Call Trace: <IRQ> init_vf.isra.19+0xec/0x250 [sch_hfsc] hfsc_enqueue+0x245/0x300 [sch_hfsc] ? fib_rules_lookup+0x12a/0x1d0 ? __dev_queue_xmit+0x4b6/0x930 ? hfsc_delete_class+0x250/0x250 [sch_hfsc] __dev_queue_xmit+0x4b6/0x930 ? ip6_finish_output2+0x24d/0x590 ip6_finish_output2+0x24d/0x590 ? ip6_output+0x6c/0x130 ip6_output+0x6c/0x130 ? __ip6_finish_output+0x110/0x110 mld_sendpack+0x224/0x230 mld_ifc_timer_expire+0x186/0x2c0 ? igmp6_group_dropped+0x200/0x200 call_timer_fn+0x2d/0x150 run_timer_softirq+0x20c/0x480 ? tick_sched_do_timer+0x60/0x60 ? tick_sched_timer+0x37/0x70 __do_softirq+0xf7/0x2cb irq_exit+0xa0/0xb0 smp_apic_timer_interrupt+0x74/0x150 apic_timer_interrupt+0xf/0x20 </IRQ> Fixes: e5f0e8f8e456 ("net: sched: introduce and use qdisc tree flush/purge helpers") Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru> Reported-by: Alexander Kuznetsov <wwfq@yandex-team.ru> Acked-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Acked-by: Dmitry Yakunin <zeil@yandex-team.ru> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/r/20210201200049.299153-1-ovov@yandex-team.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01ibmvnic: device remove has higher precedence over resetLijun Pan
Returning -EBUSY in ibmvnic_remove() does not actually hold the removal procedure since driver core doesn't care for the return value (see __device_release_driver() in drivers/base/dd.c calling dev->bus->remove()) though vio_bus_remove (in arch/powerpc/platforms/pseries/vio.c) records the return value and passes it on. [1] During the device removal precedure, checking for resetting bit is dropped so that we can continue executing all the cleanup calls in the rest of the remove function. Otherwise, it can cause latent memory leaks and kernel crashes. [1] https://lore.kernel.org/linuxppc-dev/20210117101242.dpwayq6wdgfdzirl@pengutronix.de/T/#m48f5befd96bc9842ece2a3ad14f4c27747206a53 Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 7d7195a026ba ("ibmvnic: Do not process device remove during device reset") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20210129043402.95744-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01net: dsa: mv88e6xxx: override existent unicast portvec in port_fdb_addDENG Qingfang
Having multiple destination ports for a unicast address does not make sense. Make port_db_load_purge override existent unicast portvec instead of adding a new port bit. Fixes: 884729399260 ("net: dsa: mv88e6xxx: handle multiple ports in ATU") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20210130134334.10243-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01i40e: Revert "i40e: don't report link up for a VF who hasn't enabled queues"Aleksandr Loktionov
This reverts commit 2ad1274fa35ace5c6360762ba48d33b63da2396c VF queues were not brought up when PF was brought up after being downed if the VF driver disabled VFs queues during PF down. This could happen in some older or external VF driver implementations. The problem was that PF driver used vf->queues_enabled as a condition to decide what link-state it would send out which caused the issue. Remove the check for vf->queues_enabled in the VF link notify. Now VF will always be notified of the current link status. Also remove the queues_enabled member from i40e_vf structure as it is not used anymore. Otherwise VNF implementation was broken and caused a link flap. The original commit was a workaround to avoid breaking existing VFs though it's really a fault of the VF code not the PF. The commit should be safe to revert as all of the VFs we know of have been fixed. Also, since we now know there is a related bug in the workaround, removing it is preferred. Fixes: 2ad1274fa35a ("i40e: don't report link up for a VF who hasn't enabled") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-01Merge tag 'media/v5.11-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "The rockship rkisp1 driver will be promoted from staging in 5.11. While not too late, do a few uAPI changes which are needed to better support its functionalities" * tag 'media/v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: rockchip: rkisp1: extend uapi array sizes media: rockchip: rkisp1: carry ip version information media: rockchip: rkisp1: reduce number of histogram grid elements in uapi media: rkisp1: stats: mask the hist_bins values media: rkisp1: stats: remove a wrong cast to u8 media: rkisp1: uapi: change hist_bins array type from __u16 to __u32
2021-02-01staging: rtl8723bs: Move wiphy setup to after reading the regulatory ↵Hans de Goede
settings from the chip Commit 81f153faacd0 ("staging: rtl8723bs: fix wireless regulatory API misuse") moved the wiphy_apply_custom_regulatory() call to earlier in the driver's init-sequence, so that it gets called before wiphy_register(). But at this point in time the eFuses which code the regulatory-settings for the chip have not been read by the driver yet, causing _rtw_reg_apply_flags() to set the IEEE80211_CHAN_DISABLED flag on *all* channels. On the device where I initially tested the fix, a Jumper EZpad 7 tablet, this does not cause any problems because shortly after init the rtw_reg_notifier() gets called fixing things up. I guess this happens into response to receiving a (broadcast) packet with regulatory info from the access-point ? But on another device with a RTL8723BS wifi chip, an Acer Switch 10E (SW3-016), the rtw_reg_notifier() never gets called. I assume that some fuse has been set on this device to ignore regulatory info received from access-points. This means that on the Acer the driver is stuck in a state with all channels disabled, leading to non working Wifi. We cannot move the wiphy_apply_custom_regulatory() call back, because that call must be made before the wiphy_register() call. Instead move the entire rtw_wdev_alloc() call to after the Efuses have been read, fixing all channels being disabled in the initial channel-map. Fixes: 81f153faacd0 ("staging: rtl8723bs: fix wireless regulatory API misuse") Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210201152956.370186-2-hdegoede@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-01igc: check return value of ret_val in igc_config_fc_after_link_upKevin Lo
Check return value from ret_val to make error check actually work. Fixes: 4eb8080143a9 ("igc: Add setup link functionality") Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-01igc: set the default return value to -IGC_ERR_NVM in igc_write_nvm_srwrKevin Lo
This patch sets the default return value to -IGC_ERR_NVM in igc_write_nvm_srwr. Without this change it wouldn't lead to a shadow RAM write EEWR timeout. Fixes: ab4056126813 ("igc: Add NVM support") Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-01igc: Report speed and duplex as unknown when device is runtime suspendedKai-Heng Feng
Similar to commit 165ae7a8feb5 ("igb: Report speed and duplex as unknown when device is runtime suspended"), if we try to read speed and duplex sysfs while the device is runtime suspended, igc will complain and stops working: [ 123.449883] igc 0000:03:00.0 enp3s0: PCIe link lost, device now detached [ 123.450052] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 123.450056] #PF: supervisor read access in kernel mode [ 123.450058] #PF: error_code(0x0000) - not-present page [ 123.450059] PGD 0 P4D 0 [ 123.450064] Oops: 0000 [#1] SMP NOPTI [ 123.450068] CPU: 0 PID: 2525 Comm: udevadm Tainted: G U W OE 5.10.0-1002-oem #2+rkl2-Ubuntu [ 123.450078] RIP: 0010:igc_rd32+0x1c/0x90 [igc] [ 123.450080] Code: c0 5d c3 b8 fd ff ff ff c3 0f 1f 44 00 00 0f 1f 44 00 00 55 89 f0 48 89 e5 41 56 41 55 41 54 49 89 c4 53 48 8b 57 08 48 01 d0 <44> 8b 28 41 83 fd ff 74 0c 5b 44 89 e8 41 5c 41 5d 4 [ 123.450083] RSP: 0018:ffffb0d100d6fcc0 EFLAGS: 00010202 [ 123.450085] RAX: 0000000000000008 RBX: ffffb0d100d6fd30 RCX: 0000000000000000 [ 123.450087] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff945a12716c10 [ 123.450089] RBP: ffffb0d100d6fce0 R08: ffff945a12716550 R09: ffff945a09874000 [ 123.450090] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000008 [ 123.450092] R13: ffff945a12716000 R14: ffff945a037da280 R15: ffff945a037da290 [ 123.450094] FS: 00007f3b34c868c0(0000) GS:ffff945b89200000(0000) knlGS:0000000000000000 [ 123.450096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 123.450098] CR2: 0000000000000008 CR3: 00000001144de006 CR4: 0000000000770ef0 [ 123.450100] PKRU: 55555554 [ 123.450101] Call Trace: [ 123.450111] igc_ethtool_get_link_ksettings+0xd6/0x1b0 [igc] [ 123.450118] __ethtool_get_link_ksettings+0x71/0xb0 [ 123.450123] duplex_show+0x74/0xc0 [ 123.450129] dev_attr_show+0x1d/0x40 [ 123.450134] sysfs_kf_seq_show+0xa1/0x100 [ 123.450137] kernfs_seq_show+0x27/0x30 [ 123.450142] seq_read+0xb7/0x400 [ 123.450148] ? common_file_perm+0x72/0x170 [ 123.450151] kernfs_fop_read+0x35/0x1b0 [ 123.450155] vfs_read+0xb5/0x1b0 [ 123.450157] ksys_read+0x67/0xe0 [ 123.450160] __x64_sys_read+0x1a/0x20 [ 123.450164] do_syscall_64+0x38/0x90 [ 123.450168] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 123.450170] RIP: 0033:0x7f3b351fe142 [ 123.450173] Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 123.450174] RSP: 002b:00007fffef2ec138 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 123.450177] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b351fe142 [ 123.450179] RDX: 0000000000001001 RSI: 00005644c047f070 RDI: 0000000000000003 [ 123.450180] RBP: 00007fffef2ec340 R08: 00005644c047f070 R09: 00007f3b352d9320 [ 123.450182] R10: 00005644c047c010 R11: 0000000000000246 R12: 00005644c047cbf0 [ 123.450184] R13: 00005644c047e6d0 R14: 0000000000000003 R15: 00007fffef2ec140 [ 123.450189] Modules linked in: rfcomm ccm cmac algif_hash algif_skcipher af_alg bnep toshiba_acpi industrialio toshiba_haps hp_accel lis3lv02d btusb btrtl btbcm btintel bluetooth ecdh_generic ecc joydev input_leds nls_iso8859_1 snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_soc_hdac_hda snd_hda_codec_hdmi snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg soundwire_intel soundwire_generic_allocation soundwire_cadence snd_hda_codec snd_hda_core ath10k_pci snd_hwdep intel_rapl_msr intel_rapl_common ath10k_core soundwire_bus snd_soc_core x86_pkg_temp_thermal ath intel_powerclamp snd_compress ac97_bus snd_pcm_dmaengine mac80211 snd_pcm coretemp snd_seq_midi snd_seq_midi_event snd_rawmidi kvm_intel cfg80211 snd_seq snd_seq_device snd_timer mei_hdcp kvm libarc4 snd crct10dif_pclmul ghash_clmulni_intel aesni_intel mei_me dell_wmi [ 123.450266] dell_smbios soundcore sparse_keymap dcdbas crypto_simd cryptd mei dell_uart_backlight glue_helper ee1004 wmi_bmof intel_wmi_thunderbolt dell_wmi_descriptor mac_hid efi_pstore acpi_pad acpi_tad intel_cstate sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec crc32_pclmul rc_core drm intel_lpss_pci i2c_i801 ahci igc intel_lpss i2c_smbus idma64 xhci_pci libahci virt_dma xhci_pci_renesas wmi video pinctrl_tigerlake [ 123.450335] CR2: 0000000000000008 [ 123.450338] ---[ end trace 9f731e38b53c35cc ]--- The more generic approach will be wrap get_link_ksettings() with begin() and complete() callbacks, and calls runtime resume and runtime suspend routine respectively. However, igc is like igb, runtime resume routine uses rtnl_lock() which upper ethtool layer also uses. So to prevent a deadlock on rtnl, take a different approach, use pm_runtime_suspended() to avoid reading register while device is runtime suspended. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-01mac80211: fix station rate table updates on assocFelix Fietkau
If the driver uses .sta_add, station entries are only uploaded after the sta is in assoc state. Fix early station rate table updates by deferring them until the sta has been uploaded. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210201083324.3134-1-nbd@nbd.name [use rcu_access_pointer() instead since we won't dereference here] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-31Linux 5.11-rc6v5.11-rc6Linus Torvalds
2021-01-31Merge tag 'efi-urgent-for-v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Borislav Petkov: "A single fix from Lukas: handle boolean device properties imported from Apple firmware correctly" * tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/apple-properties: Reinstate support for boolean properties
2021-01-31Merge tag 'x86_entry_for_v5.11_rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: "A single fix for objtool to generate proper unwind info for newer toolchains which do not generate section symbols anymore. And a cleanup ontop. This was originally going to go during the next merge window but people can already trigger a build error with binutils-2.36 which doesn't emit section symbols - something which objtool relies on - so let's expedite it" * tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry: Remove put_ret_addr_in_rdi THUNK macro argument x86/entry: Emit a symbol for register restoring thunk
2021-01-31Merge tag 'timers-urgent-2021-01-31' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A fix for handling advertised, but non-existent 146818 RTCs correctly. With the recent UIP handling changes the time readout of non-existent RTCs hangs forever as the read returns always 0xFF which means the UIP bit is set. Sanity check the RTC before registering by checking the RTC_VALID register for correctness" * tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rtc: mc146818: Detect and handle broken RTCs
2021-01-31Merge tag 'core-urgent-2021-01-31' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull single stepping fix from Thomas Gleixner: "A single fix for the single step reporting regression caused by getting the condition wrong when moving SYSCALL_EMU away from TIF flags" [ There's apparently another problem too, fix pending ] * tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Unbreak single step reporting behaviour
2021-01-31Merge tag 'powerpc-5.11-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One fix for a bug in our soft interrupt masking, which could lead to interrupt replaying recursing, causing spurious interrupts. Thanks to Nicholas Piggin" * tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous interrupt
2021-01-31Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "Just one I2C driver update this time" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mediatek: Move suspend and resume handling to NOIRQ phase
2021-01-31Merge branch 'for-rc-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED fixes from Pavel Machek: "This pull is due to 'leds: trigger: fix potential deadlock with libata' -- people find the warn annoying. It also contains new driver and two trivial fixes" * 'for-rc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: rt8515: Add Richtek RT8515 LED driver dt-bindings: leds: Add DT binding for Richtek RT8515 leds: trigger: fix potential deadlock with libata leds: leds-ariel: convert comma to semicolon leds: leds-lm3533: convert comma to semicolon
2021-01-31Merge tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client fixes from Trond Myklebust: - SUNRPC: Handle 0 length opaque XDR object data properly - Fix a layout segment leak in pnfs_layout_process() - pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn - pNFS/NFSv4: Improve rejection of out-of-order layouts - pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process() * tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Handle 0 length opaque XDR object data properly SUNRPC: Move simple_get_bytes and simple_get_netobj into private header pNFS/NFSv4: Improve rejection of out-of-order layouts pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process() pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()
2021-01-31leds: rt8515: Add Richtek RT8515 LED driverLinus Walleij
This adds a driver for the Richtek RT8515 dual channel torch/flash white LED driver. This LED driver is found in some mobile phones from Samsung such as the GT-S7710 and GT-I8190. A V4L interface is added. We do not have a proper datasheet for the RT8515 but it turns out that RT9387A has a public datasheet and is essentially the same chip. We designed the driver in accordance with this datasheet. The day someone needs to drive a RT9387A this driver can probably easily be augmented to handle that chip too. Sakari Ailus, Pavel Machek and Andy Shevchenko helped significantly in getting this driver right. Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Cc: linux-media@vger.kernel.org Cc: phone-devel@vger.kernel.org Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-01-31dt-bindings: leds: Add DT binding for Richtek RT8515Linus Walleij
Add a YAML devicetree binding for the Richtek RT8515 dual channel flash/torch LED driver. Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Cc: phone-devel@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-01-31leds: trigger: fix potential deadlock with libataAndrea Righi
We have the following potential deadlock condition: ======================================================== WARNING: possible irq lock inversion dependency detected 5.10.0-rc2+ #25 Not tainted -------------------------------------------------------- swapper/3/0 just changed the state of lock: ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200 but this lock took another, HARDIRQ-READ-unsafe lock in the past: (&trig->leddev_list_lock){.+.?}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&trig->leddev_list_lock); local_irq_disable(); lock(&host->lock); lock(&trig->leddev_list_lock); <Interrupt> lock(&host->lock); *** DEADLOCK *** no locks held by swapper/3/0. the shortest dependencies between 2nd lock and 1st lock: -> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 { HARDIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 IN-SOFTIRQ-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 kbd_bh+0x9e/0xc0 tasklet_action_common.constprop.0+0xe9/0x100 tasklet_action+0x22/0x30 __do_softirq+0xcc/0x46d run_ksoftirqd+0x3f/0x70 smpboot_thread_fn+0x116/0x1f0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 SOFTIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 INITIAL READ USE at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83da4c00>] __key.0+0x0/0x10 ... acquired at: _raw_read_lock+0x42/0x90 led_trigger_blink_oneshot+0x3b/0x90 ledtrig_disk_activity+0x3c/0xa0 ata_qc_complete+0x26/0x450 ata_do_link_abort+0xa3/0xe0 ata_port_freeze+0x2e/0x40 ata_hsm_qc_complete+0x94/0xa0 ata_sff_hsm_move+0x177/0x7a0 ata_sff_pio_task+0xc7/0x1b0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 -> (&host->lock){-...}-{2:2} ops: 69 { IN-HARDIRQ-W at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab INITIAL USE at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_dev_init+0x54/0xe0 ata_link_init+0x8b/0xd0 ata_port_alloc+0x1f1/0x210 ata_host_alloc+0xf1/0x130 ata_host_alloc_pinfo+0x14/0xb0 ata_pci_sff_prepare_host+0x41/0xa0 ata_pci_bmdma_prepare_host+0x14/0x30 piix_init_one+0x21f/0x600 local_pci_probe+0x48/0x80 pci_device_probe+0x105/0x1c0 really_probe+0x221/0x490 driver_probe_device+0xe9/0x160 device_driver_attach+0xb2/0xc0 __driver_attach+0x91/0x150 bus_for_each_dev+0x81/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x138/0x1f0 driver_register+0x91/0xf0 __pci_register_driver+0x73/0x80 piix_init+0x1e/0x2e do_one_initcall+0x5f/0x2d0 kernel_init_freeable+0x26f/0x2cf kernel_init+0xe/0x113 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10 ... acquired at: __lock_acquire+0x9da/0x2370 lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab This lockdep splat is reported after: commit e918188611f0 ("locking: More accurate annotations for read_lock()") To clarify: - read-locks are recursive only in interrupt context (when in_interrupt() returns true) - after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call write_lock(&trig->leddev_list_lock) that would be blocked by CPU0 that holds trig->leddev_list_lock in read-mode - when CPU1 (ata_ac_complete()) tries to read-lock trig->leddev_list_lock, it would be blocked by the write-lock waiter on CPU2 (because we are not in interrupt context, so the read-lock is not recursive) - at this point if an interrupt happens on CPU0 and ata_bmdma_interrupt() is executed it will try to acquire host->lock, that is held by CPU1, that is currently blocked by CPU2, so: * CPU0 blocked by CPU1 * CPU1 blocked by CPU2 * CPU2 blocked by CPU0 *** DEADLOCK *** The deadlock scenario is better represented by the following schema (thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the detailed explanation of the deadlock condition): CPU 0: CPU 1: CPU 2: ----- ----- ----- led_trigger_event(): read_lock(&trig->leddev_list_lock); <workqueue> ata_hsm_qc_complete(): spin_lock_irqsave(&host->lock); write_lock(&trig->leddev_list_lock); ata_port_freeze(): ata_do_link_abort(): ata_qc_complete(): ledtrig_disk_activity(): led_trigger_blink_oneshot(): read_lock(&trig->leddev_list_lock); // ^ not in in_interrupt() context, so could get blocked by CPU 2 <interrupt> ata_bmdma_interrupt(): spin_lock_irqsave(&host->lock); Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so that no interrupt can happen in between, preventing the deadlock condition. Apply the same change to led_trigger_blink_setup() as well, since the same deadlock scenario can also happen in power_supply_update_bat_leds() -> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context), and potentially prevent other similar usages. Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/ Fixes: eb25cb9956cc ("leds: convert IDE trigger to common disk trigger") Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-01-31leds: leds-ariel: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-01-31leds: leds-lm3533: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-01-30Merge tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Four cifs patches found in additional testing of the conversion to the new mount API: three small option processing ones, and one fixing domain based DFS referrals" * tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix dfs domain referrals cifs: returning mount parm processing errors correctly cifs: fix mounts to subdirectories of target cifs: ignore auto and noauto options if given
2021-01-30Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two minor fixes in drivers. Both changing strings (one in a comment, one in a module help text) with no code impact" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limit scsi: target: iscsi: Fix typo in comment
2021-01-30Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC fix from Stafford Horne: "Fix config dependencies for Litex SOC driver causing issues on um" * tag 'for-linus' of git://github.com/openrisc/linux: soc: litex: Properly depend on HAS_IOMEM
2021-01-30Merge tag 'devicetree-fixes-for-5.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Cleanups on properties with standard unit suffixes - Fix overwriting dma_range_map if there's no 'dma-ranges' property - Fix a bug when creating a /chosen node from ARM ATAGs - Add missing properties for TI j721e USB binding - Several doc reference updates due to DT schema conversions * tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Cleanup standard unit properties of/device: Update dma_range_map only when dev has valid dma-ranges ARM: zImage: atags_to_fdt: Fix node names on added root nodes dt-bindings: usb: j721e: add ranges and dma-coherent props dt-bindings:iio:adc: update adc.yaml reference dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references dt-bindings: display: mediatek: update mediatek,dpi.yaml reference ASoC: audio-graph-card: update audio-graph-card.yaml reference
2021-01-30Merge tag 's390-5.11-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix max number of VCPUs reported via ultravisor information sysfs interface. - Fix memory leaks during vfio-ap resources clean up on KVM pointer invalidation notification. - Fix potential specification exception by avoiding unnecessary interrupts disable after queue reset in vfio-ap. * tag 's390-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: uv: Fix sysfs max number of VCPUs reporting s390/vfio-ap: No need to disable IRQ after queue reset s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated
2021-01-30Merge tag 'riscv-for-linus-5.11-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fix from Palmer Dabbelt: "A fix to avoid initializing max_mapnr to be too large, which may manifest on NUMA systems" * tag 'riscv-for-linus-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fixup pfn_valid error with wrong max_mapnr
2021-01-30neighbour: Prevent a dead entry from updating gc_listChinmay Agarwal
Following race condition was detected: <CPU A, t0> - neigh_flush_dev() is under execution and calls neigh_mark_dead(n) marking the neighbour entry 'n' as dead. <CPU B, t1> - Executing: __netif_receive_skb() -> __netif_receive_skb_core() -> arp_rcv() -> arp_process().arp_process() calls __neigh_lookup() which takes a reference on neighbour entry 'n'. <CPU A, t2> - Moves further along neigh_flush_dev() and calls neigh_cleanup_and_release(n), but since reference count increased in t2, 'n' couldn't be destroyed. <CPU B, t3> - Moves further along, arp_process() and calls neigh_update()-> __neigh_update() -> neigh_update_gc_list(), which adds the neighbour entry back in gc_list(neigh_mark_dead(), removed it earlier in t0 from gc_list) <CPU B, t4> - arp_process() finally calls neigh_release(n), destroying the neighbour entry. This leads to 'n' still being part of gc_list, but the actual neighbour structure has been freed. The situation can be prevented from happening if we disallow a dead entry to have any possibility of updating gc_list. This is what the patch intends to achieve. Fixes: 9c29a2f55ec0 ("neighbor: Fix locking order for gc_list changes") Signed-off-by: Chinmay Agarwal <chinagar@codeaurora.org> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210127165453.GA20514@chinagar-linux.qualcomm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29rxrpc: Fix deadlock around release of dst cached on udp tunnelDavid Howells
AF_RXRPC sockets use UDP ports in encap mode. This causes socket and dst from an incoming packet to get stolen and attached to the UDP socket from whence it is leaked when that socket is closed. When a network namespace is removed, the wait for dst records to be cleaned up happens before the cleanup of the rxrpc and UDP socket, meaning that the wait never finishes. Fix this by moving the rxrpc (and, by dependence, the afs) private per-network namespace registrations to the device group rather than subsys group. This allows cached rxrpc local endpoints to be cleared and their UDP sockets closed before we try waiting for the dst records. The symptom is that lines looking like the following: unregister_netdevice: waiting for lo to become free get emitted at regular intervals after running something like the referenced syzbot test. Thanks to Vadim for tracking this down and work out the fix. Reported-by: syzbot+df400f2f24a1677cd7e0@syzkaller.appspotmail.com Reported-by: Vadim Fedorenko <vfedorenko@novek.ru> Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/161196443016.3868642.5577440140646403533.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29r8169: work around RTL8125 UDP hw bugHeiner Kallweit
It was reported that on RTL8125 network breaks under heavy UDP load, e.g. torrent traffic ([0], from comment 27). Realtek confirmed a hw bug and provided me with a test version of the r8125 driver including a workaround. Tests confirmed that the workaround fixes the issue. I modified the original version of the workaround to meet mainline code style. [0] https://bugzilla.kernel.org/show_bug.cgi?id=209839 v2: - rebased to net v3: - make rtl_skb_is_udp() more robust and use skb_header_pointer() to access the ip(v6) header v4: - remove dependency on ptp_classify.h - replace magic number with offsetof(struct udphdr, len) Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Tested-by: xplo <xplo.bn@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/6e453d49-1801-e6de-d5f7-d7e6c7526c8f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net: arcnet: Fix RESET flag handlingAhmed S. Darwish
The main arcnet interrupt handler calls arcnet_close() then arcnet_open(), if the RESET status flag is encountered. This is invalid: 1) In general, interrupt handlers should never call ->ndo_stop() and ->ndo_open() functions. They are usually full of blocking calls and other methods that are expected to be called only from drivers init and exit code paths. 2) arcnet_close() contains a del_timer_sync(). If the irq handler interrupts the to-be-deleted timer, del_timer_sync() will just loop forever. 3) arcnet_close() also calls tasklet_kill(), which has a warning if called from irq context. 4) For device reset, the sequence "arcnet_close(); arcnet_open();" is not complete. Some children arcnet drivers have special init/exit code sequences, which then embed a call to arcnet_open() and arcnet_close() accordingly. Check drivers/net/arcnet/com20020.c. Run the device RESET sequence from a scheduled workqueue instead. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20210128194802.727770-1-a.darwish@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29dt-bindings: Cleanup standard unit propertiesRob Herring
Properties with standard unit suffixes already have a type and don't need type definitions. They also default to a single entry, so 'maxItems: 1' can be dropped. adi,ad5758 is an oddball which defined an enum of arrays. While a valid schema, it is simpler as a whole to only define scalar constraints. Cc: Jean Delvare <jdelvare@suse.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: linux-hwmon@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-input@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-watchdog@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com> Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org
2021-01-29Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix the virt_addr_valid() returning true for < PAGE_OFFSET addresses. - Do not blindly trust the DMA masks from ACPI/IORT. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ACPI/IORT: Do not blindly trust DMA masks from firmware arm64: Fix kernel address detection of __is_lm_address()
2021-01-29Merge tag 'for-5.11-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes for a late rc: - fix lockdep complaint on 32bit arches and also remove an unsafe memory use due to device vs filesystem lifetime - two fixes for free space tree: * race during log replay and cache rebuild, now more likely to happen due to changes in this dev cycle * possible free space tree corruption with online conversion during initial tree population" * tag 'for-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix log replay failure due to race with space cache rebuild btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch btrfs: fix possible free space tree corruption with online conversion
2021-01-29Merge tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "All over the place fixes for this release: - blk-cgroup iteration teardown resched fix (Baolin) - NVMe pull request from Christoph: - add another Write Zeroes quirk (Chaitanya Kulkarni) - handle a no path available corner case (Daniel Wagner) - use the proper RCU aware list_add helper (Chao Leng) - bcache regression fix (Coly) - bdev->bd_size_lock IRQ fix. This will be fixed in drivers for 5.12, but for now, we'll make it IRQ safe (Damien) - null_blk zoned init fix (Damien) - add_partition() error handling fix (Dinghao) - s390 dasd kobject fix (Jan) - nbd fix for freezing queue while adding connections (Josef) - tag queueing regression fix (Ming) - revert of a patch that inadvertently meant that we regressed write performance on raid (Maxim)" * tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block: null_blk: cleanup zoned mode initialization nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head nvme-multipath: Early exit if no path is available nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES block: fix bd_size_lock use blk-cgroup: Use cond_resched() when destroy blkgs Revert "block: simplify set_init_blocksize" to regain lost performance nbd: freeze the queue while we're adding connections s390/dasd: Fix inconsistent kobject removal block: Fix an error handling in add_partition blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue
2021-01-29Merge tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "We got the cancelation story sorted now, so for all intents and purposes, this should be it for 5.11 outside of any potential little fixes that may come in. This contains: - task_work task state fixes (Hao, Pavel) - Cancelation fixes (me, Pavel) - Fix for an inflight req patch in this release (Pavel) - Fix for a lock deadlock issue (Pavel)" * tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-block: io_uring: reinforce cancel on flush during exit io_uring: fix sqo ownership false positive warning io_uring: fix list corruption for splice file_get io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLE io_uring: fix wqe->lock/completion_lock deadlock io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLE io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLE io_uring: only call io_cqring_ev_posted() if events were posted io_uring: if we see flush on exit, cancel related tasks
2021-01-30soc: litex: Properly depend on HAS_IOMEMDavid Gow
The LiteX SOC controller driver makes use of IOMEM functions like devm_platform_ioremap_resource(), which are only available if CONFIG_HAS_IOMEM is defined. This causes the driver to be enable under make ARCH=um allyesconfig, even though it won't build. By adding a dependency on HAS_IOMEM, the driver will not be enabled on architectures which don't support it. Fixes: 22447a99c97e ("drivers/soc/litex: add LiteX SoC Controller driver") Signed-off-by: David Gow <davidgow@google.com> [shorne@gmail.com: Fix typo in commit message pointed out in review] Signed-off-by: Stafford Horne <shorne@gmail.com>
2021-01-29Merge tag 'iommu-fixes-v5.11-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - AMD IOMMU fix to make sure features are detected before they are queried. - Intel IOMMU address alignment check fix for an IOLTB flushing command. - Performance fix for Intel IOMMU to make sure the code does not do full IOTLB flushes all the time. Those flushes are very expensive on emulated IOMMUs. * tag 'iommu-fixes-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Do not use flush-queue when caching-mode is on iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid() iommu/amd: Use IVHD EFR for early initialization of IOMMU features
2021-01-29Merge tag 'pm-5.11-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a deadlock in the 'kexec jump' code and address a possible hibernation image creation issue. Specifics: - Fix a deadlock caused by attempting to acquire the same mutex twice in a row in the "kexec jump" code (Baoquan He) - Modify the hibernation image saving code to flush the unwritten data to the swap storage later so as to avoid failing to write the image signature which is possible in some cases (Laurent Badel)" * tag 'pm-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: hibernate: flush swap writer after marking kernel: kexec: remove the lock operation of system_transition_mutex
2021-01-29Merge tag 'acpi-5.11-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix the handling of notifications in the ACPI thermal driver and address a device enumeration issue leading to the presence of multiple 'MODALIAS=' entries in one uevent file in sysfs in some cases. Specifics: - Modify the ACPI thermal driver to avoid evaluating _TMP directly in its Notify () handler callback and running too many thermal checks for one thermal zone at the same time so as to address a work item accumulation issue observed on some systems that fail to shut down as a result of it (Rafael Wysocki) - Modify the ACPI uevent file creation code to avoid putting multiple 'MODALIAS=' entries in one uevent file in sysfs which breaks systemd-udevd (Kai-Heng Feng)" * tag 'acpi-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: thermal: Do not call acpi_thermal_check() directly ACPI: sysfs: Prefer "compatible" modalias
2021-01-29Merge tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes for graphics, nothing too major, nouveau has a few regression fixes for various fallout from header changes previously, vc4 has two fixes, two amdgpu, and a smattering of i915 fixes. All seems on course for a quieter rc7, fingers crossed. nouveau: - fix svm init conditions - fix nv50 modesetting regression - fix cursor plane modifiers - fix > 64x64 cursor regression vc4: - Fix LBM size calculation - Fix high resolutions for hvs5 i915: - Fix ICL MG PHY vswing - Fix subplatform handling - Fix selftest memleak - Clear CACHE_MODE prior to clearing residuals - Always flush the active worker before returning from the wait - Always try to reserve GGTT address 0x0 amdgpu: - Fix a fan control regression on some boards - Fix clang warning" * tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors drm/nouveau/kms/nv50-: Report max cursor size to userspace drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices drm/nouveau/dispnv50: Restore pushing of all data. amdgpu: fix clang build warning Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)" drm/i915/gt: Always try to reserve GGTT address 0x0 drm/i915: Always flush the active worker before returning from the wait drm/i915/selftest: Fix potential memory leak drm/i915: Check for all subplatform bits drm/i915: Fix ICL MG PHY vswing handling drm/i915/gt: Clear CACHE_MODE prior to clearing residuals drm/vc4: Correct POS1_SCL for hvs5 drm/vc4: Correct lbm size and calculation drm/nouveau/nvif: fix method count when pushing an array
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-04 07:31:25 +0000