summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-05-02media: cec: cec-api: add locking in cec_release()Hans Verkuil
When cec_release() uses fh->msgs it has to take fh->lock, otherwise the list can get corrupted. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: Yang, Chenyuan <cy54@illinois.edu> Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/ Fixes: ca684386e6e2 ("[media] cec: add HDMI CEC framework (api)") Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-02media: cec: cec-adap: always cancel work in cec_transmit_msg_fhHans Verkuil
Do not check for !data->completed, just always call cancel_delayed_work_sync(). This fixes a small race condition. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: Yang, Chenyuan <cy54@illinois.edu> Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/ Fixes: 490d84f6d73c ("media: cec: forgot to cancel delayed work") Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-02media: verisilicon: Correct a typo in H1_REG_MAD_CTRL_MAD_THRESHOLDAndrzej Pietrasiewicz
It's a THRESHOLD and not a THREDHOLD. Link: https://lore.kernel.org/linux-media/20231116154816.70959-3-andrzej.p@collabora.com Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-02media: verisilicon Correct a typo in H1_REG_ENC_CTRL2_DEBLOCKING_FILTER_MODEAndrzej Pietrasiewicz
It's a FILTER and not FILETER. Link: https://lore.kernel.org/linux-media/20231116154816.70959-2-andrzej.p@collabora.com Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-02media: sunxi: a83-mips-csi2: also select GENERIC_PHYRandy Dunlap
When selecting GENERIC_PHY_MIPI_DPHY, also select GENERIC_PHY to prevent kconfig warnings: WARNING: unmet direct dependencies detected for GENERIC_PHY_MIPI_DPHY Depends on [n]: GENERIC_PHY [=n] Selected by [y]: - VIDEO_SUN8I_A83T_MIPI_CSI2 [=y] && MEDIA_SUPPORT [=y] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && V4L_PLATFORM_DRIVERS [=y] && VIDEO_DEV [=y] && (ARCH_SUNXI || COMPILE_TEST [=y]) && PM [=y] && COMMON_CLK [=y] && RESET_CONTROLLER [=y] Fixes: 94d7fd9692b5 ("media: sunxi: Depend on GENERIC_PHY_MIPI_DPHY") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/ZQ/WS8HC1A3F0Qn8@rli9-mobl Link: https://lore.kernel.org/linux-media/20230927040438.5589-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-02media: intel/ipu6: Fix direct dependency Kconfig errorRicardo Ribalda
VIDEO_INTEL_IPU6 selects IPU6_BRIDGE, but they have different set of dependencies. It fixes this warning: WARNING: unmet direct dependencies detected for IPU_BRIDGE Depends on [n]: MEDIA_SUPPORT [=y] && PCI [=y] && MEDIA_PCI_SUPPORT [=y] && I2C [=y] && ACPI [=n] Selected by [y]: - VIDEO_INTEL_IPU6 [=y] && MEDIA_SUPPORT [=y] && PCI [=y] && MEDIA_PCI_SUPPORT [=y] && (ACPI [=n] || COMPILE_TEST [=y]) && VIDEO_DEV [=y] && X86 [=y] && X86_64 [=y] && HAS_DMA [=y] Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-02media: intel/ipu6: Fix build with !ACPIRicardo Ribalda
Modify the code so it can be compiled tested in configurations that do not have ACPI enabled. It fixes the following errors: drivers/media/pci/intel/ipu-bridge.c:103:30: error: implicit declaration of function ‘acpi_device_handle’; did you mean ‘acpi_fwnode_handle’? [-Werror=implicit-function-declaration] drivers/media/pci/intel/ipu-bridge.c:103:30: warning: initialization of ‘acpi_handle’ {aka ‘void *’} from ‘int’ makes pointer from integer without a cast [-Wint-conversion] drivers/media/pci/intel/ipu-bridge.c:110:17: error: implicit declaration of function ‘for_each_acpi_dev_match’ [-Werror=implicit-function-declaration] drivers/media/pci/intel/ipu-bridge.c:110:74: error: expected ‘;’ before ‘for_each_acpi_consumer_dev’ drivers/media/pci/intel/ipu-bridge.c:104:29: warning: unused variable ‘consumer’ [-Wunused-variable] drivers/media/pci/intel/ipu-bridge.c:103:21: warning: unused variable ‘handle’ [-Wunused-variable] drivers/media/pci/intel/ipu-bridge.c:166:38: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:185:43: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:191:30: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:196:30: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:202:30: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:223:31: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:236:18: error: implicit declaration of function ‘acpi_get_physical_device_location’ [-Werror=implicit-function-declaration] drivers/media/pci/intel/ipu-bridge.c:236:56: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:238:31: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:256:31: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:275:31: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:280:30: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:469:26: error: implicit declaration of function ‘acpi_device_hid’; did you mean ‘dmi_device_id’? [-Werror=implicit-function-declaration] drivers/media/pci/intel/ipu-bridge.c:468:74: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘int’ [-Wformat=] drivers/media/pci/intel/ipu-bridge.c:637:58: error: expected ‘;’ before ‘{’ token drivers/media/pci/intel/ipu-bridge.c:696:1: warning: label ‘err_put_adev’ defined but not used [-Wunused-label] drivers/media/pci/intel/ipu-bridge.c:693:1: warning: label ‘err_put_ivsc’ defined but not used [-Wunused-label] drivers/media/pci/intel/ipu-bridge.c:691:1: warning: label ‘err_free_swnodes’ defined but not used [-Wunused-label] drivers/media/pci/intel/ipu-bridge.c:632:40: warning: unused variable ‘primary’ [-Wunused-variable] drivers/media/pci/intel/ipu-bridge.c:632:31: warning: unused variable ‘fwnode’ [-Wunused-variable] drivers/media/pci/intel/ipu-bridge.c:733:73: error: expected ‘;’ before ‘{’ token drivers/media/pci/intel/ipu-bridge.c:725:24: warning: unused variable ‘csi_dev’ [-Wunused-variable] drivers/media/pci/intel/ipu-bridge.c:724:43: warning: unused variable ‘adev’ [-Wunused-variable] drivers/media/pci/intel/ipu-bridge.c:599:12: warning: ‘ipu_bridge_instantiate_ivsc’ defined but not used [-Wunused-function] drivers/media/pci/intel/ipu-bridge.c:444:13: warning: ‘ipu_bridge_create_connection_swnodes’ defined but not used [-Wunused-function] drivers/media/pci/intel/ipu-bridge.c:297:13: warning: ‘ipu_bridge_create_fwnode_properties’ defined but not used [-Wunused-function] drivers/media/pci/intel/ipu-bridge.c:155:12: warning: ‘ipu_bridge_check_ivsc_dev’ defined but not used [-Wunused-function] Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-02media: intel/ipu6: Switch to RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPSRicardo Ribalda
Replace the old helpers with its modern alternative. Now we do not need to set '__maybe_unused' annotations when we are not enabling the PM configurations. It fixes the following warnings: drivers/media/pci/intel/ipu6/ipu6.c:841:12: warning: ‘ipu6_runtime_resume’ defined but not used [-Wunused-function] drivers/media/pci/intel/ipu6/ipu6.c:806:12: warning: ‘ipu6_resume’ defined but not used [-Wunused-function] drivers/media/pci/intel/ipu6/ipu6.c:801:12: warning: ‘ipu6_suspend’ defined but not used [-Wunused-function] Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-02media: bcm2835-unicam: Include v4l2-subdev.hLaurent Pinchart
The unicam driver uses the v4l2_subdev structure. Include the corresponding header instead of relying on indirect includes. Closes: https://lore.kernel.org/oe-kbuild-all/202404302324.8aTC84kE-lkp@intel.com/ Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-02media: bcm2835-unicam: Fix build with !PMRicardo Ribalda
The driver can only match the device vide the DT table, so the table should always be used, of_match_ptr does not make sense here. It fixes this warning: drivers/media/platform/broadcom/bcm2835-unicam.c:2724:34: warning: ‘unicam_of_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-30media: staging: max96712: fix copy-paste errorIhor Matushchak
Link: https://lore.kernel.org/linux-media/20231014143843.3409-1-ihor.matushchak@foobox.net Signed-off-by: Ihor Matushchak <ihor.matushchak@foobox.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-30media: ipu3: Use MODULE_FIRMWARE to add firmware files metadataVíctor Gonzalo
The ipu3 driver requests firmware files but does not use the MODULE_FIRMWARE macro to show them in the module metadata [mchehab: add missing firmware file: IMGU_FW_NAME_IPU_20161208] Link: https://lore.kernel.org/linux-media/20230914135100.19911-1-victor.gonzalo@anddroptable.net Signed-off-by: Víctor Gonzalo <victor.gonzalo@anddroptable.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-30media: cec: cec.h: 2.1 ms -> 2100 msHans Verkuil
The transfer timeout is 2100 ms, not 2.1 ms. Fix this in the kerneldoc comment. Link: https://lore.kernel.org/linux-media/17cd1a67-3966-237c-2e0d-2d3ae618f915@xs4all.nl Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: dw2102: fix a potential buffer overflowMauro Carvalho Chehab
As pointed by smatch: drivers/media/usb/dvb-usb/dw2102.c:802 su3000_i2c_transfer() error: __builtin_memcpy() '&state->data[4]' too small (64 vs 67) That seemss to be due to a wrong copy-and-paste. Fixes: 0e148a522b84 ("media: dw2102: Don't translate i2c read into write") Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: IR remote control for AVerMedia TD310Alex Volkov
Uses NEC defaults as other non-eeprom devices. Link: https://lore.kernel.org/linux-media/2273969.FyfRTN5kjP@bootes Signed-off-by: Alex Volkov <alex@bootes.sytes.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: atomisp-mt9m114: adjust macro parameter nameJulia Lawall
The macro parameter name, sd, captures the field name in the third argument of container_of. Fortunately, the argument at all uses is actually sd. But change the macro parameter name anyway, for a little added safety. Link: https://lore.kernel.org/linux-media/20230315090904.20092-1-Julia.Lawall@inria.fr Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: dt-bindings: media: i2c: Rename ov8856.yamlLad Prabhakar
Rename 'ov8856.yaml' as 'ovti,ov8856.yaml' and update the MAINTAINERS file entry accordingly. All the Omnivision sensor DT bindings have vendor prefix "ovti," to their file name hence this renaming. Link: https://lore.kernel.org/linux-media/20220916110955.23757-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: uapi: v4l: Don't expose generic metadata formats to userspaceLaurent Pinchart
The generic metadata pixel formats (V4L2_META_FMT_GENERIC_*) are meant to be used in conjunction with device-specific media bus codes. Those codes are work in progress and not available in the upstream kernel yet. To make sure the generic metadata pixel formats won't be used by userspace until we have the full infrastructure in place, keep their definition private to the kernel for now. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: Documentation: add documentation of Intel IPU6 driver and hardware ↵Bingbu Cao
overview Add a documentation for an overview of IPU6 hardware and describe the main the components of IPU6 driver. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: Documentation: add Intel IPU6 ISYS driver admin-guide docBingbu Cao
This document mainly describe the functionality of IPU6 and IPU6 isys driver, and gives an example that how user can do imaging capture with tools. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: intel/ipu6: support line-based metadata capture supportBingbu Cao
Some camera sensor can output the embedded data in specific data type. This patch adds the support for metadata capture in IPU6 ISYS driver. Signed-off-by: Hongju Wang <hongju.wang@intel.com> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: MAINTAINERS: add maintainers for Intel IPU6 input system driverBingbu Cao
Update MAINTAINERS file for Intel IPU6 input system driver. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: intel/ipu6: add Kconfig and MakefileBingbu Cao
Add Kconfig and Makefile for the IPU6 driver. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Andreas Helbech Kleist <andreaskleist@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: intel/ipu6: add the main input system driverBingbu Cao
The main input system driver does basic ISYS hardware setup, IRQ handling and sets up device nodes. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: intel/ipu6: input system video nodes and buffer queuesBingbu Cao
Register V4L2 video device and setup the VB2 queues to support video capture. Video streaming callback will trigger the input system driver to construct a input system stream configuration for firmware based on data type and stream ID and then queue buffers to firmware to do capture. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: intel/ipu6: add the CSI2 DPHY implementationBingbu Cao
IPU6 CSI-2 D-PHY hardware varies on different platforms, current IPU6 has three D-PHY hardware instances which are used on Tigerlake, Alder lake, Meteor lake and Jasper lake. MCD D-PHY is included in Tigerlake and Alder lake, DWC D-PHY is included in Meteor lake. Each PHY has its own register interface, the input system driver calls the appropriate D-PHY callbacks for the hardware set in isys_probe(). Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: intel/ipu6: add IPU6 CSI2 receiver v4l2 sub-deviceBingbu Cao
Input system CSI2 receiver is exposed as a v4l2 sub-device. Each CSI2 sub-device represent one single CSI2 hardware port which be linked with external sub-device such camera sensor by linked with ISYS CSI2's sink pad. The CSI2 source pad is linked to the sink pad of video capture device. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: intel/ipu6: input system ABI between firmware and driverBingbu Cao
Implement the input system firmware ABIs in the ISYS driver, including stream configuration, control command, capture request and response. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: intel/ipu6: add syscom interfaces between firmware and driverBingbu Cao
Syscom is an inter-process(or) communication mechanism between an IPU and host. Syscom uses message queues for message exchange between IPU and host. Each message queue has its consumer and producer, host queue messages to firmware as the producer and then firmware to dequeue the messages as consumer and vice versa. IPU and host use shared registers or memory to reside the read and write indices which are updated by consumer and producer. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: intel/ipu6: add IPU6 DMA mapping API and MMU tableBingbu Cao
The Intel IPU6 has internal microcontrollers (scalar processor, SP) which are used to execute the firmware. The SPs can access IPU internal memory and system DRAM mapped to its an internal 32-bit virtual address space. This patch adds a driver for the IPU MMU and a DMA mapping implementation using the internal MMU. The system IOMMU may be used besides the IPU MMU. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: intel/ipu6: CPD parsing for get firmware componentsBingbu Cao
For IPU6, firmware is generated and released as signed Code Partition Directory (CPD) format file which is aligned with the SPI flash code partition definition. The CPD format includes CPD header, manifest, metadata and module data. The driver parses them according to the CPD layout to acquire each component. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: intel/ipu6: add IPU6 buttress interface driverBingbu Cao
The IPU6 buttress is the interface between IPU device (input system and processing system) with rest of the SoC. It contains overall IPU hardware control registers, these control registers are used as the interfaces with the Intel Converged Security Engine and Punit to do firmware authentication and power management. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: intel/ipu6: add IPU auxiliary devicesBingbu Cao
Even though the IPU input system and processing system are in a single PCI device, each system has its own power sequence. Powering up the processing system depends on first powering up the input system. Besides, both the input and processing systems have their own MMU hardware for IPU DMA address mapping. Register the IS/PS devices on auxiliary bus and attach power domain to implement the power sequence dependency. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: intel/ipu6: add Intel IPU6 PCI device driverBingbu Cao
Intel Image Processing Unit 6th Gen includes input and processing systems but the hardware presents itself as a single PCI device in system. The IPU6 PCI device driver basically does PCI configurations and loads the firmware binary, initialises IPU virtual bus and sets up platform specific variants to support multiple IPU6 devices in single device driver. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: ivsc: csi: Use IPU bridgeSakari Ailus
Use IPU bridge to instantiate software nodes for IPU6 related devices. If the IPU6 device is probed before the MEI CSI device is created, neither will probe unless there are further devices probed successfully which triggers re-probe of both IPU6 and MEI CSI. This patch ensures the necessary software nodes are in place when the MEI CSI driver is probed. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: ipu6: Add PCI device table headerSakari Ailus
Add a header for the PCI device table of all IPU6 devices. This will be used by the IPU bridge as well so place the table in a header. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: bcm2835-unicam: Add support for CCP2/CSI2 camera interfaceDave Stevenson
Add a driver for the Unicam camera receiver block on BCM283x processors. It is represented as two video device nodes: unicam-image and unicam-embedded which are connected to an internal subdev (named unicam-subdev) in order to manage streams routing. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Co-developed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Co-developed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [Sakari Ailus: Squash fixes by Laurent.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29dt-bindings: media: Add bindings for bcm2835-unicamDave Stevenson
Introduce the dt-bindings documentation for bcm2835 CCP2/CSI2 Unicam camera interface. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Co-developed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Co-developed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: v4l: Add V4L2-PIX-FMT-Y14P formatJean-Michel Hautbois
This is a packed grey-scale image format with a depth of 14 bits per pixel. Every four consecutive samples are packed into seven bytes. Each of the first four bytes contain the eight high order bits of the pixels, and the three following bytes contains the six least significants bits of each pixel, in the same order. As the other formats only needed 5 bytes before, append two bytes in the documentation array. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: v4l: Add V4L2-PIX-FMT-Y12P formatJean-Michel Hautbois
This is a packed grey-scale image format with a depth of 12 bits per pixel. Two consecutive pixels are packed into 3 bytes. The first 2 bytes contain the 8 high order bits of the pixels, and the 3rd byte contains the 4 least significants bits of each pixel, in the same order. Add the entry in userspace API, and document it. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: v4l: subdev: Add trivial set_routing supportSakari Ailus
Add trivial S_ROUTING IOCTL support for drivers where routing is static. Essentially this means returning the same information G_ROUTING call would have done. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Julien Massot <julien.massot@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: v4l: subdev: Return routes set using S_ROUTINGSakari Ailus
Return the routes set using S_ROUTING back to the user. Also reflect this in documentation. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: v4l: subdev: Add len_routes field to struct v4l2_subdev_routingSakari Ailus
The len_routes field is used to tell the size of the routes array in struct v4l2_subdev_routing. This way the number of routes returned from S_ROUTING IOCTL may be larger than the number of routes provided, in case there are more routes returned by the driver. Note that this uAPI is still disabled in the code, so this change can safely be done. Anyone who manually patched the code to enable this uAPI must update their code. The patch also increases the number of reserved fields in struct v4l2_subdev_routing. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: v4l: subdev: Copy argument back to user also for S_ROUTINGSakari Ailus
As the user needs to know what went wrong for S_ROUTING, copy array arguments back to the user. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: v4l: subdev: Add a function to lock two sub-device states, use itSakari Ailus
Add two new functions, v4l2_subdev_lock_states() and v4l2_subdev_unclock_states(), to acquire and release the state of two sub-devices. They differ from calling v4l2_subdev_{un,}lock_state() so that if the two states share the same lock, the lock is acquired only once. Also use the new functions in v4l2_subdev_link_validate(). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: Documentation: Document S_ROUTING behaviourSakari Ailus
Document S_ROUTING behaviour for different devices. Generally in devices that produce streams the streams are static and some can be enabled and disabled, whereas in devices that just transport them or write them to memory, more configurability is allowed. Document this. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: Documentation: Additional streams generally don't harm captureSakari Ailus
Having extra streams on the source end of the link that cannot be captured by the sink sub-device generally are not an issue, at least not on CSI-2 bus. Still document that there may be hardware-specific limitations. For example on parallel bus this might not work on all cases. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: v4l: Set line based metadata flag in V4L2 coreSakari Ailus
Set (and unset) the V4L2_FMT_FLAG_META_LINE_BASED flag in struct v4l2_fmtdesc based on the format after returning the driver callback for enumerating formats. This way the drivers don't need to care about the flag. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: v4l: Support line-based metadata captureSakari Ailus
Many camera sensors, among other devices, transmit embedded data and image data for each CSI-2 frame. This embedded data typically contains register configuration of the sensor that has been used to capture the image data of the same frame. The embedded data is received by the CSI-2 receiver and has the same properties as the image data, including that it is line based: it has width, height and bytesperline (stride). Add these fields to struct v4l2_meta_format and document them. Also add V4L2_FMT_FLAG_META_LINE_BASED to tell a given format is line-based i.e. these fields of struct v4l2_meta_format are valid for it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: uapi: v4l: Add generic 8-bit metadata format definitionsSakari Ailus
Generic 8-bit metadata formats define the in-memory data layout but not the format of the data itself. The reasoning for having such formats is to allow CSI-2 receiver drivers to receive and DMA drivers to write the data to memory without knowing a large number of device-specific formats. These formats may be used only in conjunction with a Media Controller pipeline where the internal pad of the source sub-device defines the specific format of the data (using an mbus code). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-27 04:04:02 +0000