summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-09-22ALSA: oxygen: add UART I/O functionsClemens Ladisch
Add functions to allow model drivers to communicate with external chips by doing I/O with the not-used-for-MIDI UART. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: configure MIDI via device_configClemens Ladisch
To enable the MIDI port, model drivers must now set flags in device_config, not only in misc_flags. This allows model drivers to enable the UART without creating an ALSA MIDI device. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: rename pcm_dev_cfgClemens Ladisch
Rename the pcm_dev_cfg field to device_config because there will be additional flags that do not describe PCM devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: virtuoso: create common functions for GPIO bit switch controlsClemens Ladisch
Factor out the common code of the mixer callbacks that handle controls that just switch a single GPIO bit. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: virtuoso: handle D2X/DX dynamicallyClemens Ladisch
The Xonar D2X and DX are very similar to the D2 and D1, respectively, so we can handle the differences dynamically instead of using a separate model structure for each one. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: handle X-Meridian dynamicallyClemens Ladisch
Handle the differences between the X-Meridian and the other models in the probe callback instead of using a second model structure. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: remove X-Meridian magic numberClemens Ladisch
Introduce symbols that indicate the two models handled by the snd-oxygen driver, instead of using a magic number. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: add probe callbackClemens Ladisch
Add a probe callback to the model structure so that model-specific drivers can refine their model detection before the card is initialized. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: use a copy of the model structClemens Ladisch
Put a copy of the model structure into the chip structure so that model- specific drivers can modify it depending on a particular device instance. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: use SPDIF channel status symbolsClemens Ladisch
When setting the SPDIF channel status sample rate field, use the recently defined symbols instead of magic numbers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-09ALSA: Release v1.0.18rc3Jaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: HDA patch_via.c: Second S/PDIF (HDMI) supportHarald Welte
The VT1702 and VT1708S have a second S/PDIF output which is used to connect to a HDMI transmitter. This patch adds support for it. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: HDA patch_via.c: Independent DAC for headphoneHarald Welte
This mode allows an output stream to have two substreams, one for the speakers and one for the headphone. Each of the substreams has independent PCM data and uses a different DAC. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: HDA patch_via.c: Mute on headphone plug-inHarald Welte
Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: HDA patch_via.c: Add VT1708S and VT1702 supportHarald Welte
The VT1702 and VT1708S codecs are new HDA codecs by VIA. This patch adds support for them to the patch_via.c file for HDA Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: HDA patch_via.c: Fix inversion of surround and side channelsHarald Welte
In the current driver, there is a consistent mistake between the SURROUND and the SIDE channels. This patch fixes it. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: HDA patch_via.c: HP and CD pin connect configHarald Welte
Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: HDA patch_via.c: cleanupHarald Welte
* add extra parenthesis to make code more readable * use kzalloc() for alloc+zero rather than kcalloc() * ensure that AUTO_SEQ_* starts at 0 Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: fix section for sa11xx-uda1341 platform driverUwe Kleine-König
Don't use __init but __devinit to define probe function. A pointer to sa11xx_uda1341_probe is passed to the core via platform_driver_register and so the function must not disappear after the module is loaded. Using __init and having HOTPLUG=y and SND_SA11XX_UDA1341=m the following probably oopses: echo -n sa11xx_uda1341.1 > /sys/bus/platform/driver/sa11xx_uda1341/unbind echo -n sa11xx_uda1341.1 > /sys/bus/platform/driver/sa11xx_uda1341/bind Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Brian Avery <b.avery@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: hda - add missing slave_dig_outs for 92HD73bxxMatthew Ranostay
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: hda: SPDIF mux name changeMatthew Ranostay
Changed the mux naming scheme from "IEC9258 Mux" to "IEC958 Playback Source" to match the coding style. Signed-by-off: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: hda: digital slave support for IDT codecsMatthew Ranostay
Added slave_dig_outs entries for several IDT codecs that have multiple SPDIF outs, and enabled these SPDIF outs in several pin configs. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: ASoC: Use codec digital mute when stopping playbackMark Brown
Muting the DAC masks artefacts introduced as the digital stream shuts down, for example when the input stops being clocked. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: ASoC: Sort Kconfig and Makefile entries for codecsMark Brown
Hopefully this will make merges a little bit easier. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: ASoC: Fix indentation in WM9713Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: hda: slave digital out supportMatthew Ranostay
Added support for playing a stream on multiple digital outs. This is done by defining codec->slave_dig_outs as array of hda_nid_t with a null-terminated entry to set the slave SPDIF outs, in which the slave outs have cloned settings of the master out (e.g. dig_out_nid). Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: fix section mismatch in the sound_coreKrzysztof Helt
The __exit cleanup_oss_soundcore() is called from the __init init_soundcore(). This causes section mismatch and breaks kernel's linking on sparc64. Remove the __exit attribute from the cleanup_oss_soundcore(). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: use correct lock in snd_ctl_dev_disconnect()Takashi Iwai
The lock used in snd_ctl_dev_disconnect() should be card->ctl_files_rwlock for protection of card->ctl_files entries, instead of card->controls_rwsem. Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: ice1712.c: fix coding styleAlexander Beregalov
before: total: 113 errors, 169 warnings, 2786 lines checked total: 26 errors, 24 warnings, 504 lines checked after: total: 14 errors, 163 warnings, 2799 lines checked total: 0 errors, 24 warnings, 504 lines checked Compile tested only. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: ice1724.c: fix coding styleAlexander Beregalov
before: total: 96 errors, 66 warnings, 2612 lines checked after: total: 11 errors, 64 warnings, 2624 lines checked Compile tested only. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: ice1712/ice1724: Coding style fixes part 1 (more coming up)Vedran Miletic
Inspired by Alexander Beregalov's patches for wtm and aureon.c, I decided to run checkpatch on some more files. After some work checkpatch.pl-0.23 --no-tree --file --strict <file> reports 0 errors, 0 warnings, 0 checks, n lines checked for: phase.c phase.h juli.c (1 check about unused code, maybe we should comment it) juli.h (no changes necessary) In other files I have just fixed // comments and long lines along the way (but not all of them), more coming up. Signed-off-by: Vedran Miletic <rivanvx@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: hda: removed unneeded hp_nid referencesMatthew Ranostay
Removed unneeded hp_nid references for 92hd73xx codec family. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: hda: SPDIF mux controlsMatthew Ranostay
Dynamically create mux controls for SPDIF outs on certain IDT/Sigmatel codecs. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: ice1712/wtm: fix coding styleAlexander Beregalov
before: total: 2 errors, 0 warnings, 20 lines checked total: 49 errors, 2 warnings, 518 lines checked after: total: 0 errors, 0 warnings, 20 lines checked total: 0 errors, 0 warnings, 518 lines checked Compile tested, size and code are equal. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: ice1712/aureon.c: fix coding styleAlexander Beregalov
before: total: 304 errors, 137 warnings, 2259 lines checked after: total: 0 errors, 121 warnings, 2284 lines checked Compile tested, size is different because of include was changed, but without that change md5sum is different because of cmp cx,dx/cmp dx,cx swap and __LINE__ was changed in printk function. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: ASoC: Blackfin: Include Blackfin architecture support in buildCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: ASoC: Blackfin: add Blackfin arch ASoC Kconfig and MakefileCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: ASoC: Blackfin: board driver for SSM2602 sound chipCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: ASoC: Blackfin: board driver for AD1980/1 audio codecCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: ASoC: Blackfin: I2S CPU DAI driverCliff Cai
[Additional coding standards fixes by Mark Brown.] Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: ASoC: Blackfin: DMA Driver for I2S sound chipCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: ASoC: Blackfin: AC97 Blackfin CPU DAI driverCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: ASoC: Blackfin: DMA Driver for AC97 sound chipCliff Cai
[Additional coding standards fixes by Mark Brown.] Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: ASoC: Blackfin: SPORT peripheral interface driverCliff Cai
SPORT is a serial port which can support serveral serial communication protocols. It can be used as I2C/PCM/AC97. For further information, please look up the HRM. [Additional coding standards fixes by Mark Brown.] Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: ASoC codec: SSM2602 audio codec driverCliff Cai
[Some checkpatch fixups done by Mark Brown.] Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: ASoC: Convert wm8510 to a new-style i2c driverJean Delvare
Convert the wm8510 codec driver to the new (standard) device driver binding model. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Geoffrey Wossum <gwossum@acm.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: ASoC: Convert neo1973/lm4857 to a new-style i2c driverJean Delvare
Convert the lm4857 driver in neo1973_wm8753 to the new (standard) i2c device driver binding model. I assumed that the LM4857 was always on the same I2C bus as the WM8753 codec. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Tim Niemeyer <reddog@mastersword.de> Cc: Graeme Gregory <graeme@openmoko.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: ASoC: Convert wm8753 to a new-style i2c driverJean Delvare
Convert the wm8753 codec driver to the new (standard) i2c device driver binding model. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Frank Mandarino <fmandarino@endrelia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: ASoC: Fix an error path in neo1973_wm8753Jean Delvare
The error handling in neo1973_init is incorrect: * If platform_device_add fails, we go on with the rest of the initialization instead of bailing out. Things will break when the module is removed (platform_device_unregister called on a device that wasn't registered.) * If i2c_add_driver fails, we return an error so the module will not load, but we don't unregister neo1973_snd_device, so we are leaking resources. Add the missing error handling. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Tim Niemeyer <reddog@mastersword.de> Cc: Graeme Gregory <graeme@openmoko.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09sound: remove reference to dead sound OSS vars AEDSP16_MSS and SBPRORobert P. J. Day
Remove the Kconfig definitions of unused variables AEDSP16_MSS and AEDSP16_SBPRO since they're: 1) unused, and 2) referenced incorrectly anyway. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-27 23:00:32 +0000