| Age | Commit message (Collapse) | Author |
|---|
|
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
====================
Link: https://lore.kernel.org/r/20240507134224.2646246-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash.
This patch fixes this by registering the devlink after
hardware initialization.
Fixes: cd6242991d2e ("net: hns3: add support for registering devlink for VF")
Fixes: 93305b77ffcb ("net: hns3: fix kernel crash when devlink reload during pf initialization")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
According to hardware limitation, for device support modify
VLAN filter state but not support bypass port VLAN filter,
it should always disable the port VLAN filter. but the driver
enables port VLAN filter when initializing, if there is no
VLAN(except VLAN 0) id added, the driver will disable it
in service task. In most time, it works fine. But there is
a time window before the service task shceduled and net device
being registered. So if user adds VLAN at this time, the driver
will not update the VLAN filter state, and the port VLAN filter
remains enabled.
To fix the problem, if support modify VLAN filter state but not
support bypass port VLAN filter, set the port vlan filter to "off".
Fixes: 184cd221a863 ("net: hns3: disable port VLAN filter when support function level VLAN filter control")
Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is a memory barrier in followed case. When set the port down,
hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has
different behaviour based on whether the state is DOWN. Thus, to make sure
service task see DOWN, use smp_mb__after_atomic after calling set_bit().
CPU0 CPU1
========================== ===================================
hclgevf_set_timer_task() hclgevf_periodic_service_task()
set_bit(DOWN,state) test_bit(DOWN,state)
pf also has this issue.
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Fixes: 1c6dfe6fc6f7 ("net: hns3: remove mailbox and reset work in hclge_main")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During the PF initialization process, hclge_update_port_info may return an
error code for some reason. At this point, the ptp initialization has been
completed. To void memory leaks, the resources that are applied by ptp
should be released. Therefore, when hclge_update_port_info returns an error
code, hclge_ptp_uninit is called to release the corresponding resources.
Fixes: eaf83ae59e18 ("net: hns3: add querying fec ability from firmware")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It provides nodemask_t to describe the numa node mask in kernel. To
improve transportability, change the type of numa_node_mask as nodemask_t.
Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the driver didn't return when receive a unknown
mailbox message, and continue checking whether need to
generate a response. It's unnecessary and may be incorrect.
Fixes: bb5790b71bad ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a reset occurring, it's supposed to recover user's configuration.
Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac
and will be scheduled updated. Consider the case that reset was happened
consecutively. During the first reset, the port info is configured with
a temporary value cause the PHY is reset and looking for best link config.
Second reset start and use pervious configuration which is not the user's.
The specific process is as follows:
+------+ +----+ +----+
| USER | | PF | | HW |
+---+--+ +-+--+ +-+--+
| ethtool --reset | |
+------------------->| reset command |
| ethtool --reset +-------------------->|
+------------------->| +---+
| +---+ | |
| | |reset currently | | HW RESET
| | |and wait to do | |
| |<--+ | |
| | send pervious cfg |<--+
| | (1000M FULL AN_ON) |
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | reset command |<--+
| +-------------------->|
| | +---+
| | send pervious cfg | | HW RESET
| | (10M HALF AN_OFF) |<--+
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | | |
| | read cfg(time task) |<--+
| | (10M HALF AN_OFF) |
| |<--------------------+
| | |
v v v
To avoid aboved situation, this patch introduced req_speed, req_duplex,
req_autoneg to store user's configuration and it only be used after
hardware reset and to recover user's configuration
Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable
resolved by ip_route_output_flow() are not released or put before return.
It may cause the refcount leak, so fix it.
Link: https://lore.kernel.org/r/20240506015439.108739-1-guwen@linux.alibaba.com
Fixes: e5c4744cfb59 ("net/smc: add SMC-Rv2 connection establishment")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240507125331.2808-1-guwen@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Before ORing the new clock rate with the control register value read
from the hardware, the existing clock rate needs to be masked off as
otherwise the existing value will interfere with the new one.
CC: stable@vger.kernel.org
Fixes: 8596124c4c1b ("spi: microchip-core-qspi: Add support for microchip fpga qspi controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240508-fox-unpiloted-b97e1535627b@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to syzbot, there is a chance that ip6_dst_idev()
returns NULL in ip6_output(). Most places in IPv6 stack
deal with a NULL idev just fine, but not here.
syzbot reported:
general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7]
CPU: 0 PID: 9775 Comm: syz-executor.4 Not tainted 6.9.0-rc5-syzkaller-00157-g6a30653b604a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:ip6_output+0x231/0x3f0 net/ipv6/ip6_output.c:237
Code: 3c 1e 00 49 89 df 74 08 4c 89 ef e8 19 58 db f7 48 8b 44 24 20 49 89 45 00 49 89 c5 48 8d 9d e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 4c 8b 74 24 28 0f 85 61 01 00 00 8b 1b 31 ff
RSP: 0018:ffffc9000927f0d8 EFLAGS: 00010202
RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000040000
RDX: ffffc900131f9000 RSI: 0000000000004f47 RDI: 0000000000004f48
RBP: 0000000000000000 R08: ffffffff8a1f0b9a R09: 1ffffffff1f51fad
R10: dffffc0000000000 R11: fffffbfff1f51fae R12: ffff8880293ec8c0
R13: ffff88805d7fc000 R14: 1ffff1100527d91a R15: dffffc0000000000
FS: 00007f135c6856c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000080 CR3: 0000000064096000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
NF_HOOK include/linux/netfilter.h:314 [inline]
ip6_xmit+0xefe/0x17f0 net/ipv6/ip6_output.c:358
sctp_v6_xmit+0x9f2/0x13f0 net/sctp/ipv6.c:248
sctp_packet_transmit+0x26ad/0x2ca0 net/sctp/output.c:653
sctp_packet_singleton+0x22c/0x320 net/sctp/outqueue.c:783
sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline]
sctp_outq_flush+0x6d5/0x3e20 net/sctp/outqueue.c:1212
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x59cc/0x60c0 net/sctp/sm_sideeffect.c:1169
sctp_primitive_ASSOCIATE+0x95/0xc0 net/sctp/primitive.c:73
__sctp_connect+0x9cd/0xe30 net/sctp/socket.c:1234
sctp_connect net/sctp/socket.c:4819 [inline]
sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834
__sys_connect_file net/socket.c:2048 [inline]
__sys_connect+0x2df/0x310 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x7a/0x90 net/socket.c:2072
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 778d80be5269 ("ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20240507161842.773961-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Up till now the code to start HSR announce timer, which triggers sending
supervisory frames, was assuming that hsr_netdev_notify() would be called
at least twice for hsrX interface. This was required to have different
values for old and current values of network device's operstate.
This is problematic for a case where hsrX interface is already in the
operational state when hsr_netdev_notify() is called, so timer is not
configured to trigger and as a result the hsrX is not sending supervisory
frames to HSR ring.
This error has been discovered when hsr_ping.sh script was run. To be
more specific - for the hsr1 and hsr2 the hsr_netdev_notify() was
called at least twice with different IF_OPER_{LOWERDOWN|DOWN|UP} states
assigned in hsr_check_carrier_and_operstate(hsr). As a result there was
no issue with sending supervisory frames.
However, with hsr3, the notify function was called only once with
operstate set to IF_OPER_UP and timer responsible for triggering
supervisory frames was not fired.
The solution is to use netif_oper_up() and netif_running() helper
functions to assess if network hsrX device is up.
Only then, when the timer is not already pending, it is started.
Otherwise it is deactivated.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507111214.3519800-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot is able to trigger the following crash [1],
caused by unsafe ip6_dst_idev() use.
Indeed ip6_dst_idev() can return NULL, and must always be checked.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 31648 Comm: syz-executor.0 Not tainted 6.9.0-rc4-next-20240417-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:__fib6_rule_action net/ipv6/fib6_rules.c:237 [inline]
RIP: 0010:fib6_rule_action+0x241/0x7b0 net/ipv6/fib6_rules.c:267
Code: 02 00 00 49 8d 9f d8 00 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 f9 32 bf f7 48 8b 1b 48 89 d8 48 c1 e8 03 <42> 80 3c 20 00 74 08 48 89 df e8 e0 32 bf f7 4c 8b 03 48 89 ef 4c
RSP: 0018:ffffc9000fc1f2f0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1a772f98c8186700
RDX: 0000000000000003 RSI: ffffffff8bcac4e0 RDI: ffffffff8c1f9760
RBP: ffff8880673fb980 R08: ffffffff8fac15ef R09: 1ffffffff1f582bd
R10: dffffc0000000000 R11: fffffbfff1f582be R12: dffffc0000000000
R13: 0000000000000080 R14: ffff888076509000 R15: ffff88807a029a00
FS: 00007f55e82ca6c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31d23000 CR3: 0000000022b66000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
fib_rules_lookup+0x62c/0xdb0 net/core/fib_rules.c:317
fib6_rule_lookup+0x1fd/0x790 net/ipv6/fib6_rules.c:108
ip6_route_output_flags_noref net/ipv6/route.c:2637 [inline]
ip6_route_output_flags+0x38e/0x610 net/ipv6/route.c:2649
ip6_route_output include/net/ip6_route.h:93 [inline]
ip6_dst_lookup_tail+0x189/0x11a0 net/ipv6/ip6_output.c:1120
ip6_dst_lookup_flow+0xb9/0x180 net/ipv6/ip6_output.c:1250
sctp_v6_get_dst+0x792/0x1e20 net/sctp/ipv6.c:326
sctp_transport_route+0x12c/0x2e0 net/sctp/transport.c:455
sctp_assoc_add_peer+0x614/0x15c0 net/sctp/associola.c:662
sctp_connect_new_asoc+0x31d/0x6c0 net/sctp/socket.c:1099
__sctp_connect+0x66d/0xe30 net/sctp/socket.c:1197
sctp_connect net/sctp/socket.c:4819 [inline]
sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834
__sys_connect_file net/socket.c:2048 [inline]
__sys_connect+0x2df/0x310 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x7a/0x90 net/socket.c:2072
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 5e5f3f0f8013 ("[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr().")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240507163145.835254-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several clocks as well as both sgmiisys phandles were added by mistake
to the Ethernet bindings for MT7988. Also, the total number of clocks
didn't match with the actual number of items listed.
This happened because the vendor driver which served as a reference uses
a high number of syscon phandles to access various parts of the SoC
which wasn't acceptable upstream. Hence several parts which have never
previously been supported (such SerDes PHY and USXGMII PCS) are going to
be implemented by separate drivers. As a result the device tree will
look much more sane.
Quickly align the bindings with the upcoming reality of the drivers
actually adding support for the remaining Ethernet-related features of
the MT7988 SoC.
Fixes: c94a9aabec36 ("dt-bindings: net: mediatek,net: add mt7988-eth binding")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1569290b21cc787a424469ed74456a7e976b102d.1715084326.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit c37ce764cd492f044dcdbb39616298f02b0dbc7f.
RCCL library is currently not treating spatial partitions differently,
hence this change is causing issues. Revert temporarily till RCCL
implementation is ready for spatial partitions.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Limit the workaround introduced by commit 31729e8c21ec ("drm/amd/pm: fixes
a random hang in S4 for SMU v13.0.4/11") to only run in the s4 path.
Cc: Tim Huang <Tim.Huang@amd.com>
Fixes: 31729e8c21ec ("drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3351
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Some older MST hubs do not report DPCD registers according to
specification.
[How]
This change re-applies commit c53655545141 ("drm/amd/display: dsc mst
re-compute pbn for changes on hub").
With an additional check for these older MST devices.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Idle optimizations are blocked if there's more than one eDP connector
on the board - blocking S0i3 and IPS2 for static screen.
[How]
Fix the checks to correctly detect number of active eDP.
Also restrict the eDP support to panels that have correct feature
support.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
This fixes a bug introduced by commit c53655545141 ("drm/amd/display: dsc
mst re-compute pbn for changes on hub").
The change caused light-up issues with a second display that required
DSC on some MST docks.
[How]
Use Virtual DPCD for DSC caps in MST case.
[Limitations]
This change only affects MST DSC devices that follow specifications
additional changes are required to check for old MST DSC devices such as
ones which do not check for Virtual DPCD registers.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Underflow occurs when running Netflix in a 4k144 eDP + 4k60 HDMI FRL
setup. It is caused by latency varying based on the DCFCLK/FCLK state.
[How]
Enable urgent latency adjustment and match the reference to existing
ASIC that also see increased latency at low FCLK.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull smb server fixes from Steve French:
"Five ksmbd server fixes, all also for stable
- Three fixes related to SMB3 leases (fixes two xfstests, and a
locking issue)
- Unitialized variable fix
- Socket creation fix when bindv6only is set"
* tag '6.9-rc7-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: do not grant v2 lease if parent lease key and epoch are not set
ksmbd: use rwsem instead of rwlock for lease break
ksmbd: avoid to send duplicate lease break notifications
ksmbd: off ipv6only for both ipv4/ipv6 binding
ksmbd: fix uninitialized symbol 'share' in smb2_tree_connect()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Two one-liner fixes for issues introduced in -rc1"
* tag 'fuse-fixes-6.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtiofs: include a newline in sysfs tag
fuse: verify zero padding in fuse_backing_map
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Fix xfstests generic/013 test failure with dirsync mount option
- Initialize the reserved fields of deleted file and stream extension
dentries to zero
* tag 'exfat-for-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: zero the reserved fields of file and stream extension dentries
exfat: fix timing of synchronizing bitmap and inode
|
|
Pull bcachefs fixes from Kent Overstreet:
- Various syzbot fixes; mainly small gaps in validation
- Fix an integer overflow in fiemap() which was preventing filefrag
from returning the full list of extents
- Fix a refcounting bug on the device refcount, turned up by new
assertions in the development branch
- Fix a device removal/readd bug; write_super() was repeatedly dropping
and retaking bch_dev->io_ref references
* tag 'bcachefs-2024-05-07.2' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Add missing sched_annotate_sleep() in bch2_journal_flush_seq_async()
bcachefs: Fix race in bch2_write_super()
bcachefs: BCH_SB_LAYOUT_SIZE_BITS_MAX
bcachefs: Add missing skcipher_request_set_callback() call
bcachefs: Fix snapshot_t() usage in bch2_fs_quota_read_inode()
bcachefs: Fix shift-by-64 in bformat_needs_redo()
bcachefs: Guard against unknown k.k->type in __bkey_invalid()
bcachefs: Add missing validation for superblock section clean
bcachefs: Fix assert in bch2_alloc_v4_invalid()
bcachefs: fix overflow in fiemap
bcachefs: Add a better limit for maximum number of buckets
bcachefs: Fix lifetime issue in device iterator helpers
bcachefs: Fix bch2_dev_lookup() refcounting
bcachefs: Initialize bch_write_op->failed in inline data path
bcachefs: Fix refcount put in sb_field_resize error path
bcachefs: Inodes need extra padding for varint_decode_fast()
bcachefs: Fix early error path in bch2_fs_btree_key_cache_exit()
bcachefs: bucket_pos_to_bp_noerror()
bcachefs: don't free error pointers
bcachefs: Fix a scheduler splat in __bch2_next_write_buffer_flush_journal_buf()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of last minute fixes that came in over the previous
week, addressing:
- A pin configuration bug on a qualcomm board that caused issues with
ethernet and mmc
- Two minor code fixes for misleading console output in the microchip
firmware driver
- A build warning in the sifive cache driver"
* tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: microchip: clarify that sizes and addresses are in hex
firmware: microchip: don't unconditionally print validation success
arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
cache: sifive_ccache: Silence unused variable warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Update kernel-parameters doc to describe "pcie_aspm=off" more
accurately (Bjorn Helgaas)
- Restore the parent's (not the child's) ASPM state to the parent
during resume, which fixes a reboot during resume (Kai-Heng Feng)
* tag 'pci-v6.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Restore parent state to parent, child state to child
PCI/ASPM: Clarify that pcie_aspm=off means leave ASPM untouched
|
|
David Howells says:
====================
rxrpc: Miscellaneous fixes (part)
Here some miscellaneous fixes for AF_RXRPC:
(1) Fix the congestion control algorithm to start cwnd at 4 and to not cut
ssthresh when the peer cuts its rwind size.
(2) Only transmit a single ACK for all the DATA packets glued together
into a jumbo packet to reduce the number of ACKs being generated.
====================
Link: https://lore.kernel.org/r/20240503150749.1001323-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only generate one ACK packet for all the subpackets in a jumbo packet. If
we would like to generate more than one ACK, we prioritise them base on
their reason code, in the order, highest first:
OutOfSeq > NoSpace > ExceedsWin > Duplicate > Requested > Delay > Idle
For the first four, we reference the lowest offending subpacket; for the
last three, the highest.
This reduces the number of ACKs we end up transmitting to one per UDP
packet transmitted to reduce network loading and packet parsing.
Fixes: 5d7edbc9231e ("rxrpc: Get rid of the Rx ring")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com <mailto:jaltman@auristor.com>>
Link: https://lore.kernel.org/r/20240503150749.1001323-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make the following fixes to the congestion control algorithm:
(1) Don't vary the cwnd starting value by the size of RXRPC_TX_SMSS since
that's currently held constant - set to the size of a jumbo subpacket
payload so that we can create jumbo packets on the fly. The current
code invariably picks 3 as the starting value.
Further, the starting cwnd needs to be an even number because we ack
every other packet, so set it to 4.
(2) Don't cut ssthresh when we see an ACK come from the peer with a
receive window (rwind) less than ssthresh. ssthresh keeps track of
characteristics of the connection whereas rwind may be reduced by the
peer for any reason - and may be reduced to 0.
Fixes: 1fc4fa2ac93d ("rxrpc: Fix congestion management")
Fixes: 0851115090a3 ("rxrpc: Reduce ssthresh to peer's receive window")
Signed-off-by: David Howells <dhowells@redhat.com>
Suggested-by: Simon Wilkinson <sxw@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com <mailto:jaltman@auristor.com>>
Link: https://lore.kernel.org/r/20240503150749.1001323-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When creating the topology for the test, three veth pairs are created in
the initial network namespace before being moved to one of the network
namespaces created by the test.
On systems where systemd-udev uses MACAddressPolicy=persistent (default
since systemd version 242), this will result in some net devices having
the same MAC address since they were created with the same name in the
initial network namespace. In turn, this leads to arping / ndisc6
failing since packets are dropped by the bridge's loopback filter.
Fix by creating each net device in the correct network namespace instead
of moving it there from the initial network namespace.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240426074015.251854d4@kernel.org/
Fixes: 7648ac72dcd7 ("selftests: net: Add bridge neighbor suppression test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240507113033.1732534-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is possible that the host connected and saw a cm established
event and started sending nvme capsules on the qp, however the
ctrl did not yet see an established event. This is why the
rsp_wait_list exists (for async handling of these cmds, we move
them to a pending list).
Furthermore, it is possible that the ctrl cm times out, resulting
in a connect-error cm event. in this case we hit a bad deref [1]
because in nvmet_rdma_free_rsps we assume that all the responses
are in the free list.
We are freeing the cmds array anyways, so don't even bother to
remove the rsp from the free_list. It is also guaranteed that we
are not racing anything when we are releasing the queue so no
other context accessing this array should be running.
[1]:
--
Workqueue: nvmet-free-wq nvmet_rdma_free_queue_work [nvmet_rdma]
[...]
pc : nvmet_rdma_free_rsps+0x78/0xb8 [nvmet_rdma]
lr : nvmet_rdma_free_queue_work+0x88/0x120 [nvmet_rdma]
Call trace:
nvmet_rdma_free_rsps+0x78/0xb8 [nvmet_rdma]
nvmet_rdma_free_queue_work+0x88/0x120 [nvmet_rdma]
process_one_work+0x1ec/0x4a0
worker_thread+0x48/0x490
kthread+0x158/0x160
ret_from_fork+0x10/0x18
--
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The nsid value is a u32 that comes from nvmet_req_find_ns(). It's
endian data and we're on an error path and both of those raise red
flags. So let's make this safer.
1) Make the buffer large enough for any u32.
2) Remove the unnecessary initialization.
3) Use snprintf() instead of sprintf() for even more safety.
4) The sprintf() function returns the number of bytes printed, not
counting the NUL terminator. It is impossible for the return value to
be <= 0 so delete that.
Fixes: 505363957fad ("nvmet: fix nvme status code when namespace is disabled")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
As it was done in commit fc1092f51567 ("ipv4: Fix uninit-value access in
__ip_make_skb()") for IPv4, check FLOWI_FLAG_KNOWN_NH on fl6->flowi6_flags
instead of testing HDRINCL on the socket to avoid a race condition which
causes uninit-value access.
Fixes: ea30388baebc ("ipv6: Fix an uninit variable access bug in __ip6_make_skb()")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Different revisions of the Marvell 88q2xxx phy needs different init
sequences.
Add init sequence for Rev B1 and Rev B2. Rev B2 init sequence skips one
register write.
Tested-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a broadcast AppleTalk packet is received, prefer queuing it on the
socket whose address matches the address of the interface that received
the packet (and is listening on the correct port). Userspace
applications that handle such packets will usually send a response on
the same socket that received the packet; this fix allows the response
to be sent on the correct interface.
If a socket matching the interface's address is not found, an arbitrary
socket listening on the correct port will be used, if any. This matches
the implementation's previous behavior.
Fixes atalkd's responses to network information requests when multiple
network interfaces are configured to use AppleTalk.
Link: https://lore.kernel.org/netdev/20200722113752.1218-2-vincent.ldev@duvert.net/
Link: https://gist.github.com/VinDuv/4db433b6dce39d51a5b7847ee749b2a4
Signed-off-by: Vincent Duvert <vincent.ldev@duvert.net>
Signed-off-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The change from skb_copy to pskb_copy unfortunately changed the data
copying to omit the ethernet header, since it was pulled before reaching
this point. Fix this by calling __skb_push/pull around pskb_copy.
Fixes: 59c878cbcdd8 ("net: bridge: fix multicast-to-unicast with fraglist GSO")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When tmigr_setup_groups() fails the level 0 group allocation, then the
cleanup derefences index -1 of the local stack array.
Prevent this by checking the loop condition first.
Fixes: 7ee988770326 ("timers: Implement the hierarchical pull model")
Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20240506041059.86877-1-ppbuk5246@gmail.com
|
|
The internal tag string doesn't contain a newline. Append one when
emitting the tag via sysfs.
[Stefan] Orthogonal to the newline issue, sysfs_emit(buf, "%s", fs->tag) is
needed to prevent format string injection.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Fixes: a8f62f50b4e4 ("virtiofs: export filesystem tags through sysfs")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The current behavior is to accept any strings as inputs, this results in
an inconsistent result where an unexisting scheduler can be set:
# sysctl -w net.mptcp.scheduler=notdefault
net.mptcp.scheduler = notdefault
This patch changes this behavior by checking for existing scheduler
before accepting the input.
Fixes: e3b2870b6d22 ("mptcp: add a new sysctl scheduler")
Cc: stable@vger.kernel.org
Signed-off-by: Gregory Detal <gregory.detal@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240506-upstream-net-20240506-mptcp-sched-exist-v1-1-2ed1529e521e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 7e8cdc97148c ("nfc: Add KCOV annotations") added
kcov_remote_start_common()/kcov_remote_stop() pair into nci_rx_work(),
with an assumption that kcov_remote_stop() is called upon continue of
the for loop. But commit d24b03535e5e ("nfc: nci: Fix uninit-value in
nci_dev_up and nci_ntf_packet") forgot to call kcov_remote_stop() before
break of the for loop.
Reported-by: syzbot <syzbot+0438378d6f157baae1a2@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2
Fixes: d24b03535e5e ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet")
Suggested-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/6d10f829-5a0c-405a-b39a-d7266f3a1a0b@I-love.SAKURA.ne.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fix for 6.9
Fix wild read on capability check.
|
|
The debug print clearly lacks a \n at the end. Add it.
Fixes: 8f86c82aba8b ("drm/connector: demote connector force-probes for non-master clients")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502153234.1.I2052f01c8d209d9ae9c300b87c6e4f60bd3cc99e@changeid
|
|
Commit 1f2bcb8c8ccd ("gpio: protect the descriptor label with SRCU")
caused a massive drop in performance of requesting GPIO lines due to the
call to synchronize_srcu() on each label change. Rework the code to not
wait until all read-only users are done with reading the label but
instead atomically replace the label pointer and schedule its release
after all read-only critical sections are done.
To that end wrap the descriptor label in a struct that also contains the
rcu_head struct required for deferring tasks using call_srcu() and stop
using kstrdup_const() as we're required to allocate memory anyway. Just
allocate enough for the label string and rcu_head in one go.
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Closes: https://lore.kernel.org/linux-gpio/CAMRc=Mfig2oooDQYTqo23W3PXSdzhVO4p=G4+P8y1ppBOrkrJQ@mail.gmail.com/
Fixes: 1f2bcb8c8ccd ("gpio: protect the descriptor label with SRCU")
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Acked-by: "Paul E. McKenney" <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240507121346.16969-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
When deleting many controllers one-by-one, it takes a very
long time as these work elements may serialize as they are
scheduled on the executing cpu instead of spreading. In general
nvmet_wq can definitely be used for long standing work elements
so its better to make it unbound regardless.
Signed-off-by: Sagi Grimberg <sagi.grimberg@vastdata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_write_super() was looping over online devices multiple times -
dropping and retaking io_ref each time.
This meant it could race with device removal; it could increment the
sequence number on a device but fail to write it - and then if the
device was re-added, it would get confused the next time around thinking
a superblock write was silently dropped.
Fix this by taking io_ref once, and stashing pointers to online devices
in a darray.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If nvmet_auth_ctrl_hash() fails, return the error code to its callers
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Sandisk SN530 NVMe drives have broken MSIs. On systems without MSI-X
support, all commands time out resulting in the following message:
nvme nvme0: I/O tag 12 (100c) QID 0 timeout, completion polled
These timeouts cause the boot to take an excessively-long time (over 20
minutes) while the initial command queue is flushed.
Address this by adding a quirk for drives with buggy MSIs. The lspci
output for this device (recorded on a system with MSI-X support) is:
02:00.0 Non-Volatile memory controller: Sandisk Corp Device 5008 (rev 01) (prog-if 02 [NVM Express])
Subsystem: Sandisk Corp Device 5008
Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0
Memory at f7e00000 (64-bit, non-prefetchable) [size=16K]
Memory at f7e04000 (64-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [b0] MSI-X: Enable+ Count=17 Masked-
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [1b8] Latency Tolerance Reporting
Capabilities: [300] Secondary PCI Express
Capabilities: [900] L1 PM Substates
Kernel driver in use: nvme
Kernel modules: nvme
Cc: <stable@vger.kernel.org>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Starting BDB version 239, hdr_dpcd_refresh_timeout is introduced to
backlight BDB data. Commit 700034566d68 ("drm/i915/bios: Define more BDB
contents") updated the backlight BDB data accordingly. This broke the
parsing of backlight BDB data in VBT for versions 236 - 238 (both
inclusive) and hence the backlight controls are not responding on units
with the concerned BDB version.
backlight_control information has been present in backlight BDB data
from at least BDB version 191 onwards, if not before. Hence this patch
extracts the backlight_control information for BDB version 191 or newer.
Tested on Chromebooks using Jasperlake SoC (reports bdb->version = 236).
Tested on Chromebooks using Raptorlake SoC (reports bdb->version = 251).
v2: removed checking the block size of the backlight BDB data
[vsyrjala: this is completely safe thanks to commit e163cfb4c96d
("drm/i915/bios: Make copies of VBT data blocks")]
Fixes: 700034566d68 ("drm/i915/bios: Define more BDB contents")
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221180622.v2.1.I0690aa3e96a83a43b3fc33f50395d334b2981826@changeid
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit c286f6a973c66c0d993ecab9f7162c790e7064c8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
One more Qualcomm Arm64 DeviceTree fix for v6.9
On ths SA8155P automotive platform, the wrong gpio controller is defined
for the SD-card detect pin, which depending on probe ordering of things
cause ethernet to be broken. The card detect pin reference is corrected
to solve this problem.
* tag 'qcom-arm64-fixes-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
Link: https://lore.kernel.org/r/20240427153817.1430382-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
