| Age | Commit message (Collapse) | Author |
|---|
|
As these are now in asm-generic, it's no longer necessary to
declare them in the architecture.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The inline version is used on three NOMMU architectures and is
particularly inefficient when it scans the string one byte at a time
twice. It also lacks a check for user_addr_max(), but this is
probably ok on NOMMU targets.
Consolidate the asm-generic implementation with the library version
that is used everywhere else. This version is generalized enough to
work efficiently on both MMU and NOMMU targets, and using the
same code everywhere reduces the potential for subtle bugs.
Mark the prototypes as __must_check in the process.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The s390 variant of strncpy_from_user() is slightly faster than the
generic variant, however convert to the generic variant now to follow
most if not all other architectures.
Converting to the generic variant was already considered a couple of
years ago. See commit f5c8b9601036 ("s390/uaccess: use sane length for
__strncpy_from_user()").
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Remove the microblaze implemenation of strncpy/strnlen and instead use
the generic versions. The microblaze version is fairly slow because it
always does byte accesses even for aligned data, and it lacks a checks
for user_addr_max().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Remove the csky implemenation of strncpy/strnlen and instead use the
generic versions. The csky version is fairly slow because it always does
byte accesses even for aligned data, and it lacks a checks for
user_addr_max().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Remove the arc implemenation of strncpy/strnlen and instead use the
generic versions. The arc version is fairly slow because it always does
byte accesses even for aligned data, and its checks for user_addr_max()
differ from the generic code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Remove the hexagon implementation of strncpy/strnlen and instead use
the generic version. The hexagon version reads the data twice for
strncpy() by doing an extra strnlen(), and it apparently lacks a check
for user_addr_max().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This function is never called because h8300 uses the asm-generic
inline function version.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This is a preparation for changing over architectures to the
generic implementation one at a time. As there are no callers
of either __strncpy_from_user() or __strnlen_user(), fold these
into the strncpy_from_user() and strnlen_user() functions to make
each implementation independent of the others.
Many of these implementations have known bugs, but the intention
here is to not change behavior at all and stay compatible with
those bugs for the moment.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs
are offlined.
- Fix 'perf test' problems related to the recently added hybrid
(BIG/little) code.
- Split ARM's coresight (hw tracing) decode by aux records to avoid
fatal decoding errors.
- Fix add event failure in 'perf probe' when running 32-bit perf in a
64-bit kernel.
- Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set.
- Fix memory and refcount leaks detected by ASAn when running 'perf
test', should be clean of warnings now.
- Remove broken definition of __LITTLE_ENDIAN from tools'
linux/kconfig.h, which was breaking the build in some systems.
- Cast PTHREAD_STACK_MIN to int as it may turn into 'long
sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some
systems.
- Fix libperf build error with LIBPFM4=1.
- Sync UAPI files changed by the memfd_secret new syscall.
* tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits)
perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set
perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel
perf data: Close all files in close_dir()
perf probe-file: Delete namelist in del_events() on the error path
perf test bpf: Free obj_buf
perf trace: Free strings in trace__parse_events_option()
perf trace: Free syscall tp fields in evsel->priv
perf trace: Free syscall->arg_fmt
perf trace: Free malloc'd trace fields on exit
perf lzma: Close lzma stream on exit
perf script: Fix memory 'threads' and 'cpus' leaks on exit
perf script: Release zstd data
perf session: Cleanup trace_event
perf inject: Close inject.output on exit
perf report: Free generated help strings for sort option
perf env: Fix memory leak of cpu_pmu_caps
perf test maps__merge_in: Fix memory leak of maps
perf dso: Fix memory leak in dso__new_map()
perf test event_update: Fix memory leak of unit
perf test event_update: Fix memory leak of evlist
...
|
|
Pull xfs fixes from Darrick Wong:
"A few fixes for issues in the new online shrink code, additional
corrections for my recent bug-hunt w.r.t. extent size hints on
realtime, and improved input checking of the GROWFSRT ioctl.
IOW, the usual 'I somehow got bored during the merge window and
resumed auditing the farther reaches of xfs':
- Fix shrink eligibility checking when sparse inode clusters enabled
- Reset '..' directory entries when unlinking directories to prevent
verifier errors if fs is shrinked later
- Don't report unusable extent size hints to FSGETXATTR
- Don't warn when extent size hints are unusable because the sysadmin
configured them that way
- Fix insufficient parameter validation in GROWFSRT ioctl
- Fix integer overflow when adding rt volumes to filesystem"
* tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: detect misaligned rtinherit directory extent size hints
xfs: fix an integer overflow error in xfs_growfs_rt
xfs: improve FSGROWFSRT precondition checking
xfs: don't expose misaligned extszinherit hints to userspace
xfs: correct the narrative around misaligned rtinherit/extszinherit dirs
xfs: reset child dir '..' entry when unlinking child
xfs: check for sparse inode clusters that cross new EOAG when shrinking
|
|
Pull iomap fixes from Darrick Wong:
"A handful of bugfixes for the iomap code.
There's nothing especially exciting here, just fixes for UBSAN (not
KASAN as I erroneously wrote in the tag message) warnings about
undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some
reshuffling of per-page block state info to fix some problems with
gfs2.
- Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE
- Fix assertion errors when using inlinedata files on gfs2"
* tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor
iomap: Don't create iomap_page objects for inline files
iomap: Permit pages without an iop to enter writeback
iomap: remove the length variable in iomap_seek_hole
iomap: remove the length variable in iomap_seek_data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Restore the original behavior of scripts/setlocalversion when
LOCALVERSION is set to empty.
- Show Kconfig prompts even for 'make -s'
- Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y
for older GNU Make versions
* tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation: Fix intiramfs script name
Kbuild: lto: fix module versionings mismatch in GNU make 3.X
kbuild: do not suppress Kconfig prompts for silent build
scripts/setlocalversion: fix a bug when LOCALVERSION is empty
|
|
Documentation was not changed when renaming the script in commit
80e715a06c2d ("initramfs: rename gen_initramfs_list.sh to
gen_initramfs.sh"). Fixing this.
Basically does:
$ sed -i -e s/gen_initramfs_list.sh/gen_initramfs.sh/g $(git grep -l gen_initramfs_list.sh)
Fixes: 80e715a06c2d ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh")
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When building modules(CONFIG_...=m), I found some of module versions
are incorrect and set to 0.
This can be found in build log for first clean build which shows
WARNING: EXPORT symbol "XXXX" [drivers/XXX/XXX.ko] version generation failed,
symbol will not be versioned.
But in second build(incremental build), the WARNING disappeared and the
module version becomes valid CRC and make someone who want to change
modules without updating kernel image can't insert their modules.
The problematic code is
+ $(foreach n, $(filter-out FORCE,$^), \
+ $(if $(wildcard $(n).symversions), \
+ ; cat $(n).symversions >> $@.symversions))
For example:
rm -f fs/notify/built-in.a.symversions ; rm -f fs/notify/built-in.a; \
llvm-ar cDPrST fs/notify/built-in.a fs/notify/fsnotify.o \
fs/notify/notification.o fs/notify/group.o ...
`foreach n` shows nothing to `cat` into $(n).symversions because
`if $(wildcard $(n).symversions)` return nothing, but actually
they do exist during this line was executed.
-rw-r--r-- 1 root root 168580 Jun 13 19:10 fs/notify/fsnotify.o
-rw-r--r-- 1 root root 111 Jun 13 19:10 fs/notify/fsnotify.o.symversions
The reason is the $(n).symversions are generated at runtime, but
Makefile wildcard function expends and checks the file exist or not
during parsing the Makefile.
Thus fix this by use `test` shell command to check the file
existence in runtime.
Rebase from both:
1. [https://lore.kernel.org/lkml/20210616080252.32046-1-lecopzer.chen@mediatek.com/]
2. [https://lore.kernel.org/lkml/20210702032943.7865-1-lecopzer.chen@mediatek.com/]
Fixes: 38e891849003 ("kbuild: lto: fix module versioning")
Co-developed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When a new CONFIG option is available, Kbuild shows a prompt to get
the user input.
$ make
[ snip ]
Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW)
This is the only interactive place in the build process.
Commit 174a1dcc9642 ("kbuild: sink stdout from cmd for silent build")
suppressed Kconfig prompts as well because syncconfig is invoked by
the 'cmd' macro. You cannot notice the fact that Kconfig is waiting
for the user input.
Use 'kecho' to show the equivalent short log without suppressing stdout
from sub-make.
Fixes: 174a1dcc9642 ("kbuild: sink stdout from cmd for silent build")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
|
|
The commit 042da426f8eb ("scripts/setlocalversion: simplify the short
version part") reduces indentation. Unfortunately, it also changes behavior
in a subtle way - if the user has empty "LOCALVERSION" variable, the plus
sign is appended to the kernel version. It wasn't appended before.
This patch reverts to the old behavior - we append the plus sign only if
the LOCALVERSION variable is not set.
Fixes: 042da426f8eb ("scripts/setlocalversion: simplify the short version part")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user
if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events.
As a result, the command fails.
Before:
#perf sched record sleep 1
event syntax error: 'sched:sched_stat_wait'
\___ unknown tracepoint
Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Solution:
Check whether schedstat tracepoints are exposed. If no, these events are not recorded.
After:
# perf sched record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ]
# perf sched report
run measurement overhead: 4736 nsecs
sleep measurement overhead: 9059979 nsecs
the run test took 999854 nsecs
the sleep test took 8945271 nsecs
nr_run_events: 716
nr_sleep_events: 785
nr_wakeup_events: 0
...
------------------------------------------------------------
Fixes: 2a09b5de235a6 ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The "address" member of "struct probe_trace_point" uses long data type.
If kernel is 64-bit and perf program is 32-bit, size of "address"
variable is 32 bits.
As a result, upper 32 bits of address read from kernel are truncated, an
error occurs during address comparison in kprobe_warn_out_range().
Before:
# perf probe -a schedule
schedule is out of .text, skip it.
Error: Failed to add events.
Solution:
Change data type of "address" variable to u64 and change corresponding
address printing and value assignment.
After:
# perf.new.new probe -a schedule
Added new event:
probe:schedule (on schedule)
You can now use it in all perf tools, such as:
perf record -e probe:schedule -aR sleep 1
# perf probe -l
probe:schedule (on schedule@kernel/sched/core.c)
# perf record -e probe:schedule -aR sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ]
# perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 1K of event 'probe:schedule'
# Event count (approx.): 1366
#
# Overhead Command Shared Object Symbol
# ........ ............... ................. ............
#
6.22% migration/0 [kernel.kallsyms] [k] schedule
6.22% migration/1 [kernel.kallsyms] [k] schedule
6.22% migration/2 [kernel.kallsyms] [k] schedule
6.22% migration/3 [kernel.kallsyms] [k] schedule
6.15% migration/10 [kernel.kallsyms] [k] schedule
6.15% migration/11 [kernel.kallsyms] [k] schedule
6.15% migration/12 [kernel.kallsyms] [k] schedule
6.15% migration/13 [kernel.kallsyms] [k] schedule
6.15% migration/14 [kernel.kallsyms] [k] schedule
6.15% migration/15 [kernel.kallsyms] [k] schedule
6.15% migration/4 [kernel.kallsyms] [k] schedule
6.15% migration/5 [kernel.kallsyms] [k] schedule
6.15% migration/6 [kernel.kallsyms] [k] schedule
6.15% migration/7 [kernel.kallsyms] [k] schedule
6.15% migration/8 [kernel.kallsyms] [k] schedule
6.15% migration/9 [kernel.kallsyms] [k] schedule
0.22% rcu_sched [kernel.kallsyms] [k] schedule
...
#
# (Cannot load tips.txt file, please install perf!)
#
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jianlin Lv <jianlin.lv@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When using 'perf report' in directory mode, the first file is not closed
on exit, causing a memory leak.
The problem is caused by the iterating variable never reaching 0.
Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
ASan reports some memory leaks when running:
# perf test "42: BPF filter"
This second leak is caused by a strlist not being dellocated on error
inside probe_file__del_events.
This patch adds a goto label before the deallocation and makes the error
path jump to it.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: e7895e422e4da63d ("perf probe: Split del_perf_probe_events()")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are the patches for this week that came as the fallout of the
merge window:
- Two fixes for the NVidia memory controller driver
- multiple defconfig files get patched to turn CONFIG_FB back on
after that is no longer selected by CONFIG_DRM
- ffa and scmpi firmware drivers fixes, mostly addressing compiler
and documentation warnings
- Platform specific fixes for device tree files on ASpeed, Renesas
and NVidia SoC, mostly for recent regressions.
- A workaround for a regression on the USB PHY with devlink when the
usb-nop-xceiv driver is not available until the rootfs is mounted.
- Device tree compiler warnings in Arm Versatile-AB"
* tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
ARM: dts: versatile: Fix up interrupt controller node names
ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
ARM: configs: Update u8500_defconfig
ARM: configs: Update Vexpress defconfig
ARM: configs: Update Versatile defconfig
ARM: configs: Update RealView defconfig
ARM: configs: Update Integrator defconfig
arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/
firmware: arm_scmi: Fix range check for the maximum number of pending messages
firmware: arm_scmi: Avoid padding in sensor message structure
firmware: arm_scmi: Fix kernel doc warnings about return values
firmware: arm_scpi: Fix kernel doc warnings
firmware: arm_scmi: Fix kernel doc warnings
ARM: shmobile: defconfig: Restore graphical consoles
firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow
firmware: arm_ffa: Fix the comment style
firmware: arm_ffa: Simplify probe function
firmware: arm_ffa: Ensure drivers provide a probe function
firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow
firmware: arm_scmi: Ensure drivers provide a probe function
...
|
|
This reverts commit 788691464c29455346dc613a3b43c2fb9e5757a4.
It's not clear why, but it causes unexplained problems in entirely
unrelated xfs code. The most likely explanation is some slab
corruption, possibly triggered due to CONFIG_SLUB_DEBUG_ON. See [1].
It ends up having a few other problems too, like build errors on
arch/arc, and Geert reporting it using much more memory on m68k [3] (it
probably does so elsewhere too, but it is probably just more noticeable
on m68k).
The architecture issues (both build and memory use) are likely just
because this change effectively force-enabled STACKDEPOT (along with a
very bad default value for the stackdepot hash size). But together with
the xfs issue, this all smells like "this commit was not ready" to me.
Link: https://lore.kernel.org/linux-xfs/YPE3l82acwgI2OiV@infradead.org/ [1]
Link: https://lore.kernel.org/lkml/202107150600.LkGNb4Vb-lkp@intel.com/ [2]
Link: https://lore.kernel.org/lkml/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ [3]
Reported-by: Christoph Hellwig <hch@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One core fix for an oops which can occur if the error handling thread
fails to start for some reason and the driver is removed.
The other fixes are all minor ones in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Add missing host_lock in ufshcd_vops_setup_xfer_req()
scsi: mpi3mr: Fix W=1 compilation warnings
scsi: pm8001: Clean up kernel-doc and comments
scsi: zfcp: Report port fc_security as unknown early during remote cable pull
scsi: core: Fix bad pointer dereference when ehandler kthread is invalid
scsi: fas216: Fix a build error
scsi: core: Fix the documentation of the scsi_execute() time parameter
|
|
Pull cifs fixes from Steve French:
"Eight cifs/smb3 fixes, including three for stable.
Three are DFS related fixes, and two to fix problems pointed out by
static checkers"
* tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not share tcp sessions of dfs connections
SMB3.1.1: fix mount failure to some servers when compression enabled
cifs: added WARN_ON for all the count decrements
cifs: fix missing null session check in mount
cifs: handle reconnect of tcon when there is no cached dfs referral
cifs: fix the out of range assignment to bit fields in parse_server_interfaces
cifs: Do not use the original cruid when following DFS links for multiuser mounts
cifs: use the expiry output of dns_query to schedule next resolution
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"Fixes to kunit tool and documentation:
- fix asserts on older python versions
- fixes to misleading error messages when TAP header format is
incorrect or when file is missing
- documentation fix: drop obsolete information about uml_abort
coverage
- remove unnecessary annotations"
* tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Assert the version requirement
kunit: tool: remove unnecessary "annotations" import
Documentation: kunit: drop obsolete note about uml_abort for coverage
kunit: tool: Fix error messages for cases of no tests and wrong TAP header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"A fix to memory-hotplug hot-remove test to stop spamming logs with
dump_page() entries and slowing the system down to a crawl"
* tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit hot-remove error test
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix the histogram logic from possibly crashing the kernel
Working on the histogram code, I found that if you dereference a char
pointer in a trace event that happens to point to user space, it can
crash the kernel, as it does no checks of that pointer. I have code
coming that will do this better, so just remove this ability to treat
character pointers in trace events as stings in the histogram"
* tag 'trace-v5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not reference char * as a string in histograms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Drop 'resets' as required on renesas,du
- Moving of fixed string patterns for 'properties' instead of
'patternProperties'
- Drop more redundant minItems/maxItems that we merged in the merge
window
- Indentation warning fix for sja1105
* tag 'devicetree-fixes-for-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: renesas,du: Make resets optional on R-Car H1
dt-bindings: Move fixed string 'patternProperties' to 'properties'
dt-bindings: More dropping redundant minItems/maxItems
dt-bindings: net: dsa: sja1105: Fix indentation warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The bulk of the diffstat consists of changes to our uaccess routines
so that they fall back to bytewise copying prior to reporting complete
failure when the initial (multi-byte) access faults.
However, the most disappointing change here is that we've had to bump
ARCH_DMA_MINALIGN back to 128 bytes thanks to Qualcomm's "Kryo" CPU,
which ended up in the MSM8996 mobile SoC. Still, at least we're now
aware of this design and one of the hardware designers confirmed the
L2 cacheline size for us.
Summary:
- Fix instrumentation annotations for entry code
- Ensure kernel MTE state is restored correctly on resume from suspend
- Fix MTE fault from new strlen() routine
- Fallback to byte-wise accesses on initial uaccess fault
- Bump Clang requirement for BTI
- Revert ARCH_DMA_MINALIGN back to 128 bytes (shakes fist at Qualcomm)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: entry: fix KCOV suppression
arm64: entry: add missing noinstr
arm64: mte: fix restoration of GCR_EL1 from suspend
arm64: Avoid premature usercopy failure
arm64: Restrict ARM64_BTI_KERNEL to clang 12.0.0 and newer
Revert "arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES)"
arm64: Add missing header <asm/smp.h> in two files
arm64: fix strlen() with CONFIG_KASAN_HW_TAGS
|
|
Once the new schema interrupt-controller/arm,vic.yaml is added, we get
the below warnings:
arch/arm/boot/dts/versatile-ab.dt.yaml:
intc@10140000: $nodename:0: 'intc@10140000' does not match
'^interrupt-controller(@[0-9a-f,]+)*$'
arch/arm/boot/dts/versatile-ab.dt.yaml:
intc@10140000: 'clear-mask' does not match any of the regexes
Fix the node names for the interrupt controller to conform
to the standard node name interrupt-controller@.. Also drop invalid
clear-mask property.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210701132118.759454-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/fixes
ASPEED device tree fixes for 5.14
- eMMC phase corrections so Tacoma and Everest can boot
- VUART irq polarity fix for e3c246d4i, using new bindings
- I2C address fix for Rainier power supply
- GPIO line name fixes
* tag 'aspeed-5.14-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: everest: PSU #3 address change
ARM: dts: everest: Add phase corrections for eMMC
ARM: dts: tacoma: Add phase corrections for eMMC
ARM: dts: aspeed: Update e3c246d4i vuart properties
ARM: dts: aspeed: Fix AST2600 machines line names
Link: https://lore.kernel.org/r/CACPK8XefdPzeOUDnDgk9cHQEs-9wF_ZSPdYQRzuNOpGZTyGUKQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
been a "regression source" a lot of times. The last case is breakage of
USB mass storage boot has been commit e590474768f1 ("driver core: Set
fw_devlink=on by default") for multi_v7_defconfig. As long as
NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
endlessly and prevent booting from USB mass storage device. So make
the driver built-in as in bcm2835_defconfig and arm64/defconfig.
Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default")
Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1625915095-23077-1-git-send-email-stefan.wahren@i2se.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The platform lost the framebuffer due to a commit solving a
circular dependency in v5.14-rc1, so add it back in by explicitly
selecting the framebuffer.
The U8500 has also gained a few systems using touchscreens from
Cypress, Melfas and Zinitix so add these at the same time as
we're updating the defconfig anyway.
Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: phone-devel@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: newbyte@disroot.org
Link: https://lore.kernel.org/r/20210712085522.672482-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This updates the Versatile Express defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- CONFIG_CMA options were moved around.
- CONFIG_MODULES options were moved around.
- CONFIG_CRYPTO_HW was moved around.
Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210713133708.94397-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This updates the Versatile defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- The CONFIG_FB_MODE_HELPERS are not needed when using DRM
framebuffer emulation as DRM does.
- The Acorn fonts are removed, the default framebuffer font
works fine. I don't know why this was selected in the first
place or how the Kconfig was altered so it was removed.
Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714081819.139210-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This updates the RealView defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- The CONFIG_FB_MODE_HELPERS are not needed when using DRM
framebuffer emulation as DRM does.
- Drop two unused penguin logos.
Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714090040.182381-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This updates the Integrator defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- Drop the unused Matrox FB drivers that are only used with
specific PCI cards.
Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714122703.212609-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
ARM SCMI fixes for v5.14
A small set of fixes:
- adding check for presence of probe while registering the driver to
prevent NULL pointer access
- dropping the duplicate check as the driver core already takes care of it
- fix for possible scmi_linux_errmap buffer overflow
- fix to avoid sensor message structure padding
- fix the range check for the maximum number of pending SCMI messages
- fix for various kernel-doc warnings
* tag 'scmi-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix range check for the maximum number of pending messages
firmware: arm_scmi: Avoid padding in sensor message structure
firmware: arm_scmi: Fix kernel doc warnings about return values
firmware: arm_scpi: Fix kernel doc warnings
firmware: arm_scmi: Fix kernel doc warnings
firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow
firmware: arm_scmi: Ensure drivers provide a probe function
firmware: arm_scmi: Simplify device probe function on the bus
Link: https://lore.kernel.org/r/20210714165831.2617437-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v5.14
A small set of fixes:
- adding check for presence of probe while registering the driver to
prevent NULL pointer access
- dropping the duplicate check as the driver core already takes care of it
- fixing possible ffa_linux_errmap buffer overflow and
- fixing kernel-doc warning for comment style
* tag 'arm-ffa-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow
firmware: arm_ffa: Fix the comment style
firmware: arm_ffa: Simplify probe function
firmware: arm_ffa: Ensure drivers provide a probe function
Link: https://lore.kernel.org/r/20210714165806.2617325-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Kconfig symbol PCI_IXP4XX_LEGACY does not exist, but IXP4XX_PCI_LEGACY
does.
Fixes: d5d9f7ac58ea1041 ("ARM/ixp4xx: Make NEED_MACH_IO_H optional")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/82ce37c617293521f095a945a255456b9512769c.1626255077.git.geert+renesas@glider.be'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
arm64: tegra: Device tree fixes for v5.14-rc1
This contains two late fixes for Tegra194 device tree files to restore
USB and audio functionality after enabling system-wide IOMMU support.
* tag 'tegra-for-5.14-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable SMMU support for USB on Tegra194
arm64: tegra: Enable audio IOMMU support on Tegra194
Link: https://lore.kernel.org/r/20210709150220.2543875-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v5.14
- Fix a clock/reset handling design issue on the new RZ/G2L SoC,
requiring an atomic change to DT binding definitions, clock driver,
and DTS,
- Restore graphical consoles in the shmobile_defconfig.
* tag 'renesas-fixes-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Restore graphical consoles
dt-bindings: clock: r9a07g044-cpg: Update clock/reset definitions
clk: renesas: r9a07g044: Add P2 Clock support
clk: renesas: r9a07g044: Fix P1 Clock
clk: renesas: r9a07g044: Rename divider table
clk: renesas: rzg2l: Add multi clock PM support
Link: https://lore.kernel.org/r/cover.1626253929.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes
Memory controller drivers for v5.14 - Tegra SoC, late fixes
Two fixes for recent series of changes in Tegra SoC memory controller
drivers:
1. Add a stub for tegra_mc_probe_device() to fix compile testing of
arm-smmu without TEGRA_MC.
2. Fix arm-smmu dtschema syntax.
* tag 'memory-controller-drv-tegra-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-bindings: arm-smmu: Fix json-schema syntax
memory: tegra: Add compile-test stub for tegra_mc_probe_device()
Link: https://lore.kernel.org/r/20210625073604.13562-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull documentation fixes from Jonathan Corbet:
"A handful of fixes in and around documentation.
Some funky quotes in LICENSES/dual/CC-BY-4.0 were giving spdxcheck.py
grief; that has been fixed on both ends. Also a couple of features
updates and one docs build fix"
* tag 'docs-5.14-2' of git://git.lwn.net/linux:
docs/zh_CN: add a missing space character
Documentation/features: Add THREAD_INFO_IN_TASK feature matrix
Documentation/features: Update the ARCH_HAS_TICK_BROADCAST entry
LICENSES/dual/CC-BY-4.0: Git rid of "smart quotes"
scripts/spdxcheck.py: Strictly read license files in utf-8
|
|
Pull block fixes from Jens Axboe:
- NVMe fixes via Christoph:
- fix various races in nvme-pci when shutting down just after
probing (Casey Chen)
- fix a net_device leak in nvme-tcp (Prabhakar Kushwaha)
- Fix regression in xen-blkfront by cleaning up the removal state
machine (Christoph)
- Fix tag_set and queue cleanup ordering regression in nbd (Wang)
- Fix tag_set and queue cleanup ordering regression in pd (Guoqing)
* tag 'block-5.14-2021-07-16' of git://git.kernel.dk/linux-block:
xen-blkfront: sanitize the removal state machine
nbd: fix order of cleaning up the queue and freeing the tagset
pd: fix order of cleaning up the queue and freeing the tagset
nvme-pci: do not call nvme_dev_remove_admin from nvme_remove
nvme-pci: fix multiple races in nvme_setup_io_queues
nvme-tcp: use __dev_get_by_name instead dev_get_by_name for OPT_HOST_IFACE
|
|
Pull io_uring fixes from Jens Axboe:
"Two small fixes: one fixing the process target of a check, and the
other a minor issue with the drain error handling"
* tag 'io_uring-5.14-2021-07-16' of git://git.kernel.dk/linux-block:
io_uring: fix io_drain_req()
io_uring: use right task for exiting checks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
"A single patch to remove an unnecessary NULL bio check (from
Xianting)"
* tag 'zonefs-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: remove redundant null bio check
|
|
Pull drm fixes from Dave Airlie:
"Regular rc2 fixes though a bit more than usual at rc2 stage, people
must have been testing early or else some fixes from last week got a
bit laggy.
There is one larger change in the amd fixes to amalgamate some power
management code on the newer chips with the code from the older chips,
it should only affects chips where support was introduced in rc1 and
it should make future fixes easier to maintain probably a good idea to
merge it now.
Otherwise it's mostly fixes across the board.
dma-buf:
- Fix fence leak in sync_file_merge() error code
drm/panel:
- nt35510: Don't fail on DSI reads
fbdev:
- Avoid use-after-free by not deleting current video mode
ttm:
- Avoid NULL-ptr deref in ttm_range_man_fini()
vmwgfx:
- Fix a merge commit
qxl:
- fix a TTM regression
amdgpu:
- SR-IOV fixes
- RAS fixes
- eDP fixes
- SMU13 code unification to facilitate fixes in the future
- Add new renoir DID
- Yellow Carp fixes
- Beige Goby fixes
- Revert a bunch of TLB fixes that caused regressions
- Revert an LTTPR display regression
amdkfd
- Fix VRAM access regression
- SVM fixes
i915:
- Fix -EDEADLK handling regression
- Drop the page table optimisation"
* tag 'drm-fixes-2021-07-16' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/amdgpu: add another Renoir DID
drm/ttm: add a check against null pointer dereference
drm/i915/gtt: drop the page table optimisation
drm/i915/gt: Fix -EDEADLK handling regression
drm/amd/pm: Add waiting for response of mode-reset message for yellow carp
Revert "drm/amdkfd: Add heavy-weight TLB flush after unmapping"
Revert "drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update"
Revert "drm/amdkfd: Make TLB flush conditional on mapping"
Revert "drm/amdgpu: Fix warning of Function parameter or member not described"
Revert "drm/amdkfd: Add memory sync before TLB flush on unmap"
drm/amd/pm: Fix BACO state setting for Beige_Goby
drm/amdgpu: Restore msix after FLR
drm/amdkfd: Allow CPU access for all VRAM BOs
drm/amdgpu/display - only update eDP's backlight level when necessary
drm/amdkfd: handle fault counters on invalid address
drm/amdgpu: Correct the irq numbers for virtual crtc
drm/amd/display: update header file name
drm/amd/pm: drop smu_v13_0_1.c|h files for yellow carp
drm/amd/display: remove faulty assert
Revert "drm/amd/display: Always write repeater mode regardless of LTTPR"
...
|
